How to use Wireless Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01) on HP Compaq 6720s in Ubuntu 9.10 (32-bit edition)

Asked by tahir

.

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu gnome-nettool Edit question
Assignee:
No assignee Edit question
Solved by:
Mark Rijckenberg
Solved:
Last query:
Last reply:
Revision history for this message
Mark Rijckenberg (markrijckenberg) said :
#1

Hi,

Please first connect your network card to the wireless router using an ethernet cable (also known as a LAN cable).

In order to gather essential troubleshooting information about your wireless card, please follow this procedure:

Step 1: Open Terminal from "Applications->Accessories->Terminal"

Step 2: Please copy-paste the following command from the https://answers.launchpad.net/ubuntu website in Firefox into the Linux Terminal. Do NOT copy-paste from the Email message into the Terminal, as that will only copy PART of the command. The command STARTS with the word sudo and ENDS with the word restart. So please copy-paste the ENTIRE command below from Firefox into a Terminal, press <enter>, then enter password when sudo asks for password, then press enter again.

sudo lshw -C network; sudo iwlist scanning; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; sudo lshw -short; uname -a; dmesg | grep ound; dmesg | grep b43; dmesg | grep wl; dmesg | grep witch; iwconfig; grep b43 /etc/modprobe.d/*; grep wl /etc/modprobe.d/*; sudo /etc/init.d/networking restart

Step 3: Please post results (copy/paste terminal output) on this thread

Step 4: Please also specify the exact model and make of your PC (if known) on this thread

Regards,

Mark

Revision history for this message
tahir (tahir152) said :
#2

Dear Sir I have tried, by coping from sudo till restart. and then came out some thing like etho=etho.
then I wrote it on the next step. and then gave my pc model nr, but thing did not work.

now i am retrying it again but now it does not come out the result etho=etho. now each time i try now.

please tell me again. sorry for disturbing agian. any way with lan it is working. I need it with wifi, as asked in the question.

Tahir.

Revision history for this message
tahir (tahir152) said :
#3

Dear sir from third step i cannot go forward, I have opened terminal where came out my computer name. Then I copy and paste from scud to restart, then gave my password. and then came out some result like etho=etho.

I continued and in the next step 3 wrote these etho=etho. and then gave the command Enter.
But i think failed

Revision history for this message
tahir (tahir152) said :
#4

Dear sir from third step i cannot go forward, I have opened terminal where came out my computer name. Then I copy and paste from scud to restart, then gave my password. and then came out some result like etho=etho.

I continued and in the next step 3 wrote these etho=etho. and then gave the command Enter.
But i think failed

Revision history for this message
tahir (tahir152) said :
#5

Dear sir from third step i cannot go forward, I have opened terminal where came out my computer name. Then I copy and paste from scud to restart, then gave my password. and then came out some result like etho=etho.

I continued and in the next step 3 wrote these etho=etho. and then gave the command Enter.
But i think failed

Revision history for this message
Mark Rijckenberg (markrijckenberg) said :
#6

I will repeat the request one more time:

Please open a Terminal.

Copy-paste the following command into the Terminal:

sudo lshw -C network; sudo iwlist scanning; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; sudo lshw -short; uname -a; dmesg | grep ound; dmesg | grep b43; dmesg | grep wl; dmesg | grep witch; iwconfig; grep b43 /etc/modprobe.d/*; grep wl /etc/modprobe.d/*; sudo /etc/init.d/networking restart

Copy-paste the output from the Terminal AFTER running the whole command and paste the output in this thread.

We need to see the full Terminal output from running the above command.....

I am not providing a solution yet. I am requesting for more info using that command....

When I write: "on this thread', I mean: copy the output to this location (the current thread):

https://answers.launchpad.net/ubuntu/+source/gnome-nettool/+question/99870

Revision history for this message
tahir (tahir152) said :
#7

tahir@tahir-laptop:~$ sudo lshw -C network; sudo iwlist scanning; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; sudo lshw -short; uname -a; dmesg | grep ound; dmesg | grep b43; dmesg | grep wl; dmesg | grep witch; iwconfig; grep b43 /etc/modprobe.d/*; grep wl /etc/modprobe.d/*; sudo /etc/init.d/networking restart
[sudo] password for tahir:
  *-network
       description: Ethernet interface
       product: 82562GT 10/100 Network Connection
       vendor: Intel Corporation
       physical id: 19
       bus info: pci@0000:00:19.0
       logical name: eth0
       version: 03
       serial: 00:1f:29:89:b5:d6
       size: 100MB/s
       capacity: 100MB/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.0.2-k2 duplex=full firmware=1.1-2 ip=192.168.1.2 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s
       resources: irq:27 memory:e4600000-e461ffff memory:e4620000-e4620fff ioport:4020(size=32)
  *-network
       description: Wireless interface
       product: BCM4312 802.11b/g
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:10:00.0
       logical name: eth1
       version: 01
       serial: 00:21:00:14:07:1e
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=wl0 driverversion=5.10.91.9 latency=0 multicast=yes wireless=IEEE 802.11bg
       resources: irq:17 memory:e4000000-e4003fff
lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

eth1 Scan completed :
          Cell 01 - Address: 00:1D:6A:87:84:C7
                    ESSID:"Alice-76653511"
                    Mode:Managed
                    Frequency:2.437 GHz (Channel 6)
                    Quality:5/5 Signal level:-26 dBm Noise level:-91 dBm
                    IE: Unknown: DD5B0050F204104A0001101044000102103B0001031047001011223344556677889900ABCDEF010203102100001023000010240000104200001054000800060050F2040001101100044147494610080002000110570001001041000100
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
                    Encryption key:on
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
                              11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
                              48 Mb/s; 54 Mb/s

auto lo
iface lo inet loopback

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=9.10
DISTRIB_CODENAME=karmic
DISTRIB_DESCRIPTION="Ubuntu 9.10"
00:00.0 Host bridge [0600]: Intel Corporation Mobile GME965/GLE960 Memory Controller Hub [8086:2a10] (rev 0c)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GME965/GLE960 Integrated Graphics Controller [8086:2a12] (rev 0c)
00:02.1 Display controller [0380]: Intel Corporation Mobile GME965/GLE960 Integrated Graphics Controller [8086:2a13] (rev 0c)
00:19.0 Ethernet controller [0200]: Intel Corporation 82562GT 10/100 Network Connection [8086:10c4] (rev 03)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
00:1f.2 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller [8086:2828] (rev 03)
10:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
Bus 004 Device 002: ID 15ca:00c3 Textech International Ltd. Mini Optical Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
H/W path Device Class Description
======================================================
                               system HP Compaq 6720s
/0 bus 30D8
/0/0 memory 128KiB BIOS
/0/4 processor Intel(R) Celeron(R) CPU 550 @ 2.00GHz
/0/4/5 memory 64KiB L1 cache
/0/4/6 memory 1MiB L2 cache
/0/a memory 512MiB System Memory
/0/a/0 memory SODIMM DDR2 Synchronous [empty]
/0/a/1 memory 512MiB SODIMM DDR2 Synchronous 667 MHz (1.5 ns)
/0/100 bridge Mobile GME965/GLE960 Memory Controller Hub
/0/100/2 display Mobile GME965/GLE960 Integrated Graphics Controller
/0/100/2.1 display Mobile GME965/GLE960 Integrated Graphics Controller
/0/100/19 eth0 network 82562GT 10/100 Network Connection
/0/100/1a bus 82801H (ICH8 Family) USB UHCI Controller #4
/0/100/1a.7 bus 82801H (ICH8 Family) USB2 EHCI Controller #2
/0/100/1b multimedia 82801H (ICH8 Family) HD Audio Controller
/0/100/1c bridge 82801H (ICH8 Family) PCI Express Port 1
/0/100/1c.1 bridge 82801H (ICH8 Family) PCI Express Port 2
/0/100/1c.1/0 eth1 network BCM4312 802.11b/g
/0/100/1c.4 bridge 82801H (ICH8 Family) PCI Express Port 5
/0/100/1d bus 82801H (ICH8 Family) USB UHCI Controller #1
/0/100/1d.1 bus 82801H (ICH8 Family) USB UHCI Controller #2
/0/100/1d.2 bus 82801H (ICH8 Family) USB UHCI Controller #3
/0/100/1d.7 bus 82801H (ICH8 Family) USB2 EHCI Controller #1
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1f bridge 82801HEM (ICH8M) LPC Interface Controller
/0/100/1f.2 scsi0 storage 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller
/0/100/1f.2/0 /dev/sda disk 80GB TOSHIBA MK8046GS
/0/100/1f.2/0/1 /dev/sda1 volume 73GiB EXT4 volume
/0/100/1f.2/0/2 /dev/sda2 volume 1427MiB Extended partition
/0/100/1f.2/0/2/5 /dev/sda5 volume 1427MiB Linux swap / Solaris partition
/0/100/1f.2/1 /dev/cdrom disk DVD-RAM UJ-861H
/1 power HP
Linux tahir-laptop 2.6.31-19-generic #56-Ubuntu SMP Thu Jan 28 01:26:53 UTC 2010 i686 GNU/Linux
[ 0.168801] ACPI: No dock devices found.
[ 0.229969] pnp: PnP ACPI: found 12 devices
[ 0.870203] isapnp: No Plug & Play device found
[ 1.048112] hub 1-0:1.0: USB hub found
[ 1.068108] hub 2-0:1.0: USB hub found
[ 1.068390] hub 3-0:1.0: USB hub found
[ 1.068602] hub 4-0:1.0: USB hub found
[ 1.068820] hub 5-0:1.0: USB hub found
[ 1.069034] hub 6-0:1.0: USB hub found
[ 1.072219] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.073970] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 15.637530] lp: driver loaded but no devices found
[ 15.613116] wl: module license 'MIXED/Proprietary' taints kernel.
[ 15.616178] wl 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 15.616193] wl 0000:10:00.0: setting latency timer to 64
[ 0.016814] SMP alternatives: switching to UP code
[ 0.118186] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.472442] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.472508] ACPI: Lid Switch [C154]
[ 0.474542] Switched to high resolution mode on CPU 0
[ 2.598726] Console: switching to colour frame buffer device 160x50
lo no wireless extensions.

eth0 no wireless extensions.

eth1 IEEE 802.11 Nickname:""
          Access Point: Not-Associated

/etc/modprobe.d/blacklist-bcm43.conf:blacklist b43
/etc/modprobe.d/blacklist-bcm43.conf:blacklist b43legacy
/etc/modprobe.d/blacklist.conf:# replaced by b43 and ssb.
/etc/modprobe.d/blacklist-bcm43.conf:# Warning: This file is autogenerated by bcmwl-kernel-source. All changes to this file will be lost.
/etc/modprobe.d/blacklist-watchdog.conf:blacklist twl4030_wdt
 * Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
                                                                                                                                                      [ OK ]
tahir@tahir-laptop:~$

Revision history for this message
tahir (tahir152) said :
#8

my lap top is HP 6720s

thank you sir, waiting

Revision history for this message
Best Mark Rijckenberg (markrijckenberg) said :
#9

According to the output you sent, your wireless card is working correctly in Ubuntu and is using the right drivers. It has scanned and detected your wireless access point called ""Alice-76653511"

The problem could be that you have not yet set up the right wireless encryption password or encryption mode using NetworkManager.

Try disabling encryption and enabling SSID broadcasting on the wireless router to see if it helps you get a working wireless connection. If that works, then you know that the issue is with setting up an ENCRYPTED connection.

Revision history for this message
tahir (tahir152) said :
#10

Thank you very much sir, It is now resolved, while i was trying it came out the window with asking the password then i entered the password. and it worked.thanks again.

just a minute sir, one question after installing ubuntu and while trying to solve this problem i installed RUTILT WALAN MANAGER
 is this that made it working or it would have worked even without this software.

or in other words after installing ubuntu, to solve this problem which software one has to choose to install to make it working From ubuntu software certer.

thanks for the extra time dedicating for me.
Regards. tahir.

Revision history for this message
Mark Rijckenberg (markrijckenberg) said :
#11

Instead of changing the title of this thread, please create a separate question for the webcam issue using this link:

https://answers.launchpad.net/ubuntu/+addquestion

The current thread is already solved and that is why the title should remain "Wifi, connection to enable with Alice modem ITALY"

Currently, this thread is of no use to users visiting this thread, because the solution is not linked to the incident title anymore.

Revision history for this message
Mark Rijckenberg (markrijckenberg) said :
#12

I will now change the incident title, or else the thread will not be useful for others.....

Revision history for this message
Barnabas Zoltan Nagy (nbzmail) said :
#13

Hi Mark,

it seems that I have same problem as many other boys on my laptop. This modell is a HP nc6320 with BCM4312 and I am trying to up a Kubuntu 10.0 LTS . I skimmed a couple of answers for this issue on site and of course I tried to do what you suggested to anothers. But unfortunately didn't work until now.

1. I connected my machine to a wired network (this mail is being written on the laptop), install b43-fwcutter, restarted the NB but it still doesn't working. The card indicator LED doesn't light although press some times. (Besides there is on this machine Windows with dual boot and the wireless card and radio button are working properly.). At last I have run your recommended checking command(s) and you can't see the result:

nbz@nbz-laptop:~$ sudo lshw -C network; sudo iwlist scanning; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; sudo lshw -short; uname -a; dmesg | grep ound; dmesg | grep eth; dmesg | grep ath; dmesg | grep b43; dmesg | grep wl; dmesg | grep witch; iwconfig; grep b43 /etc/modprobe.d/*; grep wl /etc/modprobe.d/*; sudo /etc/init.d/networking restart
[sudo] password for nbz:
  *-network
       description: Wireless interface
       product: BCM4312 802.11a/b/g
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:08:00.0
       logical name: eth1
       version: 01
       serial: 00:1a:73:48:c9:16
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=wl0 driverversion=5.60.48.36 latency=0 multicast=yes wireless=IEEE 802.11abg
       resources: irq:16 memory:e8000000-e8003fff
  *-network
       description: Ethernet interface
       product: NetXtreme BCM5788 Gigabit Ethernet
       vendor: Broadcom Corporation
       physical id: e
       bus info: pci@0000:02:0e.0
       logical name: eth0
       version: 03
       serial: 00:17:a4:e0:40:42
       size: 100MB/s
       capacity: 1GB/s
       width: 32 bits
       clock: 66MHz
       capabilities: pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.102 duplex=full firmware=5788-v3.26 ip=192.168.0.101 latency=64 link=yes mingnt=64 multicast=yes port=twisted pair speed=100MB/s
       resources: irq:16 memory:e8110000-e811ffff
lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

eth1 Failed to read scan data : Invalid argument

auto lo
iface lo inet loopback

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=10.04
DISTRIB_CODENAME=lucid
DISTRIB_DESCRIPTION="Ubuntu 10.04 LTS"
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01)
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 01)
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 01)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01)
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01)
02:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
02:06.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a]
02:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
02:06.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c]
02:06.4 Communication controller [0780]: Texas Instruments PCIxx12 GemCore based SmartCard controller [104c:803d]
02:0e.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet [14e4:169c] (rev 03)
08:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11a/b/g [14e4:4312] (rev 01)
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 001 Device 002: ID 0424:2503 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
H/W path Device Class Description
=======================================================
                             system HP Compaq nc6320 (EV073AV)
/0 bus 30AA
/0/0 memory 128KiB BIOS
/0/4 processor Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz
/0/4/5 memory 64KiB L1 cache
/0/4/6 memory 2MiB L2 cache
/0/4/1.1 processor Logical CPU
/0/4/1.2 processor Logical CPU
/0/a memory 2GiB System Memory
/0/a/0 memory 1GiB SODIMM DDR2 Synchronous 667 MHz (1.5 ns)
/0/a/1 memory 1GiB SODIMM DDR2 Synchronous 975 MHz (1.0 ns)
/0/100 bridge Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub
/0/100/2 display Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller
/0/100/2.1 display Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller
/0/100/1b multimedia N10/ICH 7 Family High Definition Audio Controller
/0/100/1c bridge N10/ICH 7 Family PCI Express Port 1
/0/100/1c/0 eth1 network BCM4312 802.11a/b/g
/0/100/1c.2 bridge N10/ICH 7 Family PCI Express Port 3
/0/100/1c.3 bridge N10/ICH 7 Family PCI Express Port 4
/0/100/1d bus N10/ICH7 Family USB UHCI Controller #1
/0/100/1d.1 bus N10/ICH 7 Family USB UHCI Controller #2
/0/100/1d.2 bus N10/ICH 7 Family USB UHCI Controller #3
/0/100/1d.3 bus N10/ICH 7 Family USB UHCI Controller #4
/0/100/1d.7 bus N10/ICH 7 Family USB2 EHCI Controller
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1e/6 bridge PCIxx12 Cardbus Controller
/0/100/1e/6.1 bus PCIxx12 OHCI Compliant IEEE 1394 Host Controller
/0/100/1e/6.2 storage 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
/0/100/1e/6.3 generic PCIxx12 SDA Standard Compliant SD Host Controller
/0/100/1e/6.4 communication PCIxx12 GemCore based SmartCard controller
/0/100/1e/e eth0 network NetXtreme BCM5788 Gigabit Ethernet
/0/100/1f bridge 82801GBM (ICH7-M) LPC Interface Bridge
/0/100/1f.2 scsi0 storage 82801GBM/GHM (ICH7 Family) SATA IDE Controller
/0/100/1f.2/0 /dev/sda disk 400GB SAMSUNG HM400JI
/0/100/1f.2/0/1 /dev/sda1 volume 265GiB Windows NTFS volume
/0/100/1f.2/0/2 /dev/sda2 volume 48GiB Windows NTFS volume
/0/100/1f.2/0/3 /dev/sda3 volume 3815MiB Linux swap volume
/0/100/1f.2/0/4 /dev/sda4 volume 54GiB EXT4 volume
/0/100/1f.2/1 /dev/cdrom disk DVDRAM GSA-T10N
/0/100/1f.2/1/0 /dev/cdrom disk
Linux nbz-laptop 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 i686 GNU/Linux
[ 0.243625] ACPI: No dock devices found.
[ 0.304958] pnp: PnP ACPI: found 15 devices
[ 0.447415] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.464174] hub 1-0:1.0: USB hub found
[ 0.464510] hub 2-0:1.0: USB hub found
[ 0.464784] hub 3-0:1.0: USB hub found
[ 0.465089] hub 4-0:1.0: USB hub found
[ 0.465367] hub 5-0:1.0: USB hub found
[ 0.468643] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.471942] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.796886] isapnp: No Plug & Play device found
[ 0.952909] hub 1-1:1.0: USB hub found
[ 3.947204] tpm_inf_pnp 00:04: Found C1FF with ID IFX0102
[ 3.947264] tpm_inf_pnp 00:04: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[ 4.568421] lp: driver loaded but no devices found
[ 4.598505] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30aa]
[ 4.829385] sdhci-pci 0000:02:06.3: SDHCI controller found [104c:803c] (rev 0)
[ 0.184671] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 1.070706] eth0: Tigon3 [partno(BCM95788A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:17:a4:e0:40:42
[ 1.070711] eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0])
[ 1.070714] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.070717] eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
[ 4.509975] eth1: Broadcom BCM4312 802.11 Hybrid Wireless Controller 5.60.48.36
[ 8.993469] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.562065] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 10.562068] tg3: eth0: Flow control is on for TX and on for RX.
[ 10.562647] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.600044] eth1: no IPv6 routers present
[ 21.184012] eth0: no IPv6 routers present
[ 0.468639] device-mapper: multipath: version 1.1.0 loaded
[ 0.468643] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.293484] wl: module license 'MIXED/Proprietary' taints kernel.
[ 4.300892] wl 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.300911] wl 0000:08:00.0: setting latency timer to 64
[ 0.292278] Switching to clocksource tsc
[ 0.361012] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.361079] ACPI: Lid Switch [C238]
[ 0.367368] Switching to clocksource hpet
[ 6.062329] Console: switching to colour frame buffer device 175x65
lo no wireless extensions.

eth0 no wireless extensions.

eth1 IEEE 802.11 Access Point: Not-Associated
          Link Quality:5 Signal level:0 Noise level:0
          Rx invalid nwid:0 invalid crypt:0 invalid misc:0

/etc/modprobe.d/blacklist-bcm43.conf:blacklist b43
/etc/modprobe.d/blacklist-bcm43.conf:blacklist b43legacy
/etc/modprobe.d/blacklist.conf:# replaced by b43 and ssb.
/etc/modprobe.d/blacklist-bcm43.conf:# Warning: This file is autogenerated by bcmwl. All changes to this file will be lost.
/etc/modprobe.d/blacklist-watchdog.conf:blacklist twl4030_wdt
 * Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
                                                                                                                                                 [ OK ]
nbz@nbz-laptop:~$

I would be so appreciate if you could send a solution for my agony :))

Barney