I need Wireless Internet on Ubuntu (Karmic Koala)
I have a Dell M1530 Laptop, Wireless works in windows but I dont like too... lol.
How can I get Wireless web with Ubuntu(Karmic Koala)
Question information
- Language:
- English Edit question
- Status:
- Answered
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Revision history for this message
|
#1 |
Open up a terminal
(Applications -> Accessories -> Terminal )
in the terminal type :
"sudo ifconifg -a"
Copy and paste the output here.
Also type "sudo lspci" and paste this output here.
Revision history for this message
|
#2 |
Can you please give the output of:
sudo lshw -C network; sudo iwlist scan
Thanks
Revision history for this message
|
#3 |
Hi,
Please first connect your network card to the wireless router using an ethernet cable (also known as a LAN cable).
In order to gather essential troubleshooting information about your wireless card, please follow this procedure:
Step 1: Open Terminal from "Applications-
Step 2: Please copy-paste the following command from the https:/
sudo lshw -C network; sudo iwlist scanning; cat /etc/network/
Step 3: Please post results (copy/paste terminal output) on this thread
Regards,
Mark
Revision history for this message
|
#4 |
~$ sudo lshw -C network; sudo iwlist scanning; cat /etc/network/
*-network
description: Ethernet interface
product: 88E8040 PCI-E Fast Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:09:00.0
logical name: eth0
version: 12
serial: 00:21:9b:d1:1a:07
size: 100MB/s
capacity: 100MB/s
width: 64 bits
clock: 33MHz
resources: irq:29 memory:
*-network
description: Network controller
product: BCM4328 802.11a/b/g/n
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:0b:00.0
version: 03
width: 64 bits
clock: 33MHz
resources: irq:17 memory:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 0c)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
01:00.0 VGA compatible controller [0300]: nVidia Corporation G86 [GeForce 8400M GS] [10de:0427] (rev a1)
03:09.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
03:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/
03:09.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 12)
03:09.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
03:09.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff)
09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] (rev 12)
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4328 802.11a/b/g/n [14e4:4328] (rev 03)
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 05a9:2640 OmniVision Technologies, Inc. OV2640 Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Linux ubuntu 2.6.31-15-generic #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009 i686 GNU/Linux
[ 0.225204] ACPI: No dock devices found.
[ 0.321411] pnp: PnP ACPI: found 13 devices
[ 1.077415] isapnp: No Plug & Play device found
[ 1.109128] hub 1-0:1.0: USB hub found
[ 1.128104] hub 2-0:1.0: USB hub found
[ 1.128395] hub 3-0:1.0: USB hub found
[ 1.128635] hub 4-0:1.0: USB hub found
[ 1.128866] hub 5-0:1.0: USB hub found
[ 1.129104] hub 6-0:1.0: USB hub found
[ 1.129338] hub 7-0:1.0: USB hub found
[ 1.142046] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.144790] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.733154] ssb: Sonics Silicon Backplane found on PCI device 0000:0b:00.0
[ 5.753445] lp: driver loaded but no devices found
[ 5.795812] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
[ 5.797623] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 5.819393] ricoh-mmc: Ricoh MMC controller found at 0000:03:09.2 [1180:0843] (rev 12)
[ 5.836130] sdhci-pci 0000:03:09.1: SDHCI controller found [1180:0822] (rev 22)
[ 7.012251] input: HDA Intel Mic at Ext Front Jack as /devices/
[ 7.012341] input: HDA Intel HP Out at Ext Front Jack as /devices/
[ 7.012397] input: HDA Intel HP Out at Ext Front Jack as /devices/
[ 191.370547] Modules linked in: binfmt_misc ppdev snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device joydev nvidia(P) snd soundcore snd_page_alloc sdhci_pci sdhci ricoh_mmc iptable_filter ip_tables x_tables uvcvideo videodev v4l1_compat dell_wmi led_class lp parport dell_laptop dcdbas psmouse serio_raw ssb ohci1394 video output ieee1394 sky2 intel_agp agpgart
[ 197.352166] Modules linked in: binfmt_misc ppdev snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device joydev nvidia(P) snd soundcore snd_page_alloc sdhci_pci sdhci ricoh_mmc iptable_filter ip_tables x_tables uvcvideo videodev v4l1_compat dell_wmi led_class lp parport dell_laptop dcdbas psmouse serio_raw ssb ohci1394 video output ieee1394 sky2 intel_agp agpgart
[ 1.672595] b43-pci-bridge 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.672604] b43-pci-bridge 0000:0b:00.0: setting latency timer to 64
lo no wireless extensions.
eth0 no wireless extensions.
* Reconfiguring network interfaces...
this was the second attepmt at trying this...
Revision history for this message
|
#5 |
Hi,
Please first connect your network card to the wireless router using an ethernet cable (also known as a LAN cable).
Then please follow this procedure:
Step 1: Open Terminal from "Applications-
Terminal"
Step 2: Run the following 4 commands (copy-paste the lines below into a Terminal, press enter after each line)
sudo aptitude update
sudo aptitude dist-upgrade
sudo aptitude install linux-backports
sudo aptitude install linux-backports
Step 3: Run the following command
gksudo gedit /etc/modprobe.
# In the gedit editor, add the following lines to /etc/modprobe.
blacklist ssb
blacklist b43-pci-bridge
blacklist b43
Step 4: Run the following command
gksudo gedit /etc/modules
# In the gedit editor, add the following 2 lines to the /etc/modules file:
wl
wl0
Step 5: Save changes, reboot pc and retest wireless
Step 6: If wireless still does not work after this reboot, please resend output of the following command:
sudo lshw -C network; sudo iwlist scanning; cat /etc/network/
Please also read the following:
http://
I have modified the procedure for use in Karmic Koala (Ubuntu 9.10).
Hope it helps,
Regards,
Mark
Can you help with this problem?
Provide an answer of your own, or ask Addramyr for more information if necessary.