Karmic installed now no wireless HP 1000 mini netbook

You may need to load the firmware. Run the Hardware Drivers app in System --> Administration. It will tell you if you need them. For the HP1030 netbook, I needed the STA driver. You will need a (wired) network connection to do this.

Hi,

Please first connect your network card to the wireless router using an ethernet cable (also known as a LAN cable).

In order to gather essential troubleshooting information about your wireless card, please follow this procedure:

Step 1: Open Terminal from "Applications->Accessories->Terminal"

Step 2: Please copy-paste the following command from the https://answers.launchpad.net/ubuntu website in Firefox into the Linux Terminal. Do NOT copy-paste from the Email message into the Terminal, as that will only copy PART of the command. The command STARTS with the word sudo and ENDS with the word restart. So please copy-paste the ENTIRE command below from Firefox into a Terminal, press <enter>, then enter password when sudo asks for password, then press enter again.

sudo lshw -C network; sudo iwlist scanning; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; sudo lshw -C usb; uname -a; dmesg | grep ound; dmesg | grep b43; dmesg | grep iwl; iwconfig; sudo /etc/init.d/networking restart

Step 3: Please post results (copy/paste terminal output) on this thread

Regards,

Mark

hi,

you have reinstalled ubuntu fresh so now if u have braodcom driver in hp mini 1000,, you should follow three steps:

1> put your installation cd in cdrom, open it, go to pool/main: install dkms and fakeroot package from d and f folder
2>Noe go to pool/restricted and install bcmwl package in b folder.
3> restart your mini

your wireless will be working fine...............

enjoy..............
for further queries contact at: <email address hidden>