Question #69217 “How to enable wireless and wireless key combina...” : Questions : gnome-nettool package : Ubuntu

Revision history for this message

Mark Rijckenberg (markrijckenberg) said on 2009-04-29:

#1

Hi,

Please first connect your network card to the wireless router using an ethernet cable (also known as a LAN cable).

In order to gather essential troubleshooting information about your wireless card, please follow this procedure:

Step 1: Open Terminal from "Applications->Accessories->
Terminal"

Step 2: Run the following commands (copy-paste each line below to the Terminal then hit <enter> after each line)

sudo aptitude install hwinfo
hwinfo --netcard
sudo iwlist scanning
sudo lshw -C network
lspci -nn
lsusb
uname -a
dmesg | grep ound
dmesg | grep witch
iwconfig

Step 3: Please post results (copy/paste terminal output from each command) on this thread

Keep in mind that one or more of the following 4 basic components need to be configured correctly so that wireless can work correctly in Linux:

Wireless configuration in the BIOS, hardware wireless switch setting, active wireless driver version, and firmware for the wireless chipset (stored as a file in Linux).

Regards,

Mark

Revision history for this message

roadrash (roadrash) said on 2009-04-29:

#2

I feel a real idiot. I booted the cd a 2nd time and it detected the wireless & networks so I installed again and its all working. Must have been a glitch or something when I first booted the CD & I didn't notice the wireless not working before I Installed. Sorry for the trouble.

Revision history for this message

roadrash (roadrash) said on 2009-04-29:

#3

I still have a problem. The wireless worked flawlessly after many restarts. however, when I turned the laptop off completely then restarted it later the wireless failed to work. I don't understand why it worked perfectly until I turned it off. I think this is a bug of some description, Can you help

Revision history for this message

roadrash (roadrash) said on 2009-04-29:

#4

here is some info taken from the laptop

$>lspci
00:00.0 Host bridge: ATI Technologies Inc Device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80)
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83)
00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80)
00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
02:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
0a:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

$>lshw -c network
  *-network UNCLAIMED
       description: Ethernet controller
       product: AR242x 802.11abg Wireless PCI Express Adapter
       vendor: Atheros Communications Inc.
       physical id: 0
       bus info: pci@0000:02:00.0
       version: 01
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix cap_list
       configuration: latency=0
  *-network
       description: Ethernet interface
       product: RTL-8139/8139C/8139C+
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 7
       bus info: pci@0000:0a:07.0
       logical name: eth0
       version: 10
       serial: 00:16:d3:65:11:ee
       size: 100MB/s
       capacity: 100MB/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.1.116 latency=64 link=yes maxlatency=64 mingnt=32 module=8139too multicast=yes port=MII speed=100MB/s
  *-network DISABLED
       description: Ethernet interface
       physical id: 2
       logical name: pan0
       serial: ca:96:23:68:b6:0a
       capabilities: ethernet physical
       configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes

here is some info taken from the laptop

$>lspci
00:00.0 Host bridge: ATI Technologies Inc Device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80)
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83)
00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80)
00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
02:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
0a:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

$>lshw -c network
  *-network UNCLAIMED
       description: Ethernet controller
       product: AR242x 802.11abg Wireless PCI Express Adapter
       vendor: Atheros Communications Inc.
       physical id: 0
       bus info: pci@0000:02:00.0
       version: 01
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix cap_list
       configuration: latency=0
  *-network
       description: Ethernet interface
       product: RTL-8139/8139C/8139C+
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 7
       bus info: pci@0000:0a:07.0
       logical name: eth0
       version: 10
       serial: 00:16:d3:65:11:ee
       size: 100MB/s
       capacity: 100MB/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=full ip=192.168.1.116 latency=64 link=yes maxlatency=64 mingnt=32 module=8139too multicast=yes port=MII speed=100MB/s
  *-network DISABLED
       description: Ethernet interface
       physical id: 2
       logical name: pan0
       serial: ca:96:23:68:b6:0a
       capabilities: ethernet physical
       configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes

Revision history for this message

Shahar Or (mightyiam) said on 2009-04-29:

#5

Please paste the output of 'dmesg' and 'lsmod'

Revision history for this message

roadrash (roadrash) said on 2009-04-29:

#6

lsmod
Module Size Used by
binfmt_misc 16776 1
ppdev 15620 0
radeon 342816 2
drm 96296 3 radeon
bridge 56340 0
stp 10500 1 bridge
bnep 20224 2
input_polldev 11912 0
joydev 18368 0
lp 17156 0
parport 42220 2 ppdev,lp
snd_hda_intel 435636 3
snd_pcm_oss 46336 0
snd_mixer_oss 22656 1 snd_pcm_oss
snd_pcm 82948 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 10756 0
snd_seq_oss 37760 0
snd_seq_midi 14336 0
snd_rawmidi 29696 1 snd_seq_midi
snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi
snd_seq 56880 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 29704 2 snd_pcm,snd_seq
snd_seq_device 14988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 62628 15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 15200 1 snd
snd_page_alloc 16904 2 snd_hda_intel,snd_pcm
shpchp 40212 0
i2c_piix4 18448 0
ati_agp 14988 0
agpgart 42696 2 drm,ati_agp
psmouse 61972 0
serio_raw 13316 0
pcspkr 10496 0
video 25360 0
output 11008 1 video
ath_pci 99224 0
wlan 210288 1 ath_pci
ath_hal 198864 1 ath_pci
8139too 32128 0
8139cp 27776 0
mii 13312 2 8139too,8139cp
fbcon 46112 0
tileblit 10752 1 fbcon
font 16384 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit

dmesg
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004017] Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.22 BogoMIPS (lpj=7466440)
[ 0.004051] Security Framework initialized
[ 0.004066] SELinux: Disabled at boot.
[ 0.004105] AppArmor: AppArmor initialized
[ 0.004121] Mount-cache hash table entries: 512
[ 0.004369] Initializing cgroup subsys ns
[ 0.004378] Initializing cgroup subsys cpuacct
[ 0.004384] Initializing cgroup subsys memory
[ 0.004392] Initializing cgroup subsys freezer
[ 0.004418] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004425] CPU: L2 cache: 2048K
[ 0.004432] CPU: Physical Processor ID: 0
[ 0.004436] CPU: Processor Core ID: 0
[ 0.004445] using mwait in idle threads.
[ 0.004462] Checking 'hlt' instruction... OK.
[ 0.024009] ACPI: Core revision 20080926
[ 0.030271] ACPI: Checking initramfs for custom DSDT
[ 0.792670] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.834165] CPU0: Intel(R) Core(TM) Duo CPU T2350 @ 1.86GHz stepping 0c
[ 0.836002] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3733.93 BogoMIPS (lpj=7467863)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.921017] CPU1: Intel(R) Core(TM) Duo CPU T2350 @ 1.86GHz stepping 0c
[ 0.921059] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.924086] Brought up 2 CPUs
[ 0.924093] Total of 2 processors activated (7467.15 BogoMIPS).
[ 0.924182] CPU0 attaching sched-domain:
[ 0.924188] domain 0: span 0-1 level MC
[ 0.924194] groups: 0 1
[ 0.924209] CPU1 attaching sched-domain:
[ 0.924213] domain 0: span 0-1 level MC
[ 0.924219] groups: 1 0
[ 0.924407] net_namespace: 776 bytes
[ 0.924433] Booting paravirtualized kernel on bare hardware
[ 0.924840] Time: 15:50:29 Date: 04/29/09
[ 0.924840] regulator: core version 0.5
[ 0.924840] NET: Registered protocol family 16
[ 0.924840] EISA bus registered
[ 0.924840] ACPI: bus type pci registered
[ 0.924840] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 11
[ 0.924840] PCI: MCFG area at e0000000 reserved in E820
[ 0.924840] PCI: Using MMCONFIG for extended config space
[ 0.924840] PCI: Using configuration type 1 for base access
[ 0.929826] ACPI: EC: Look up EC in DSDT
[ 0.938455] ACPI: BIOS _OSI(Linux) query ignored
[ 0.939974] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.948160] ACPI: Interpreter enabled
[ 0.948172] ACPI: (supports S0 S3 S4 S5)
[ 0.948215] ACPI: Using IOAPIC for interrupt routing
[ 0.961136] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.961143] ACPI: EC: driver started in interrupt mode
[ 0.961464] ACPI: No dock devices found.
[ 0.961489] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.961714] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.961722] pci 0000:00:04.0: PME# disabled
[ 0.961850] pci 0000:00:12.0: reg 10 io port: [0x8440-0x8447]
[ 0.961866] pci 0000:00:12.0: reg 14 io port: [0x8430-0x8433]
[ 0.961882] pci 0000:00:12.0: reg 18 io port: [0x8420-0x8427]
[ 0.961897] pci 0000:00:12.0: reg 1c io port: [0x8410-0x8413]
[ 0.961913] pci 0000:00:12.0: reg 20 io port: [0x8400-0x840f]
[ 0.961929] pci 0000:00:12.0: reg 24 32bit mmio: [0xc0507000-0xc05071ff]
[ 0.961945] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x07ffff]
[ 0.961970] pci 0000:00:12.0: supports D1 D2
[ 0.962023] pci 0000:00:13.0: reg 10 32bit mmio: [0xc0504000-0xc0504fff]
[ 0.962133] pci 0000:00:13.1: reg 10 32bit mmio: [0xc0505000-0xc0505fff]
[ 0.962265] pci 0000:00:13.2: reg 10 32bit mmio: [0xc0506000-0xc0506fff]
[ 0.962346] pci 0000:00:13.2: supports D1 D2
[ 0.962351] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.962361] pci 0000:00:13.2: PME# disabled
[ 0.962419] pci 0000:00:14.0: reg 10 io port: [0x8450-0x845f]
[ 0.962435] pci 0000:00:14.0: reg 14 32bit mmio: [0xc0507400-0xc05077ff]
[ 0.962495] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.962562] pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.962578] pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.962593] pci 0000:00:14.1: reg 18 io port: [0x8470-0x8477]
[ 0.962609] pci 0000:00:14.1: reg 1c io port: [0x8480-0x8483]
[ 0.962624] pci 0000:00:14.1: reg 20 io port: [0x8460-0x846f]
[ 0.962763] pci 0000:00:14.2: reg 10 64bit mmio: [0xc0500000-0xc0503fff]
[ 0.962835] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.962845] pci 0000:00:14.2: PME# disabled
[ 0.963108] pci 0000:01:05.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.963119] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
[ 0.963131] pci 0000:01:05.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff]
[ 0.963158] pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.963173] pci 0000:01:05.0: supports D1 D2
[ 0.963226] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 0.963235] pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff]
[ 0.963244] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.963329] pci 0000:02:00.0: reg 10 64bit mmio: [0xc0000000-0xc000ffff]
[ 0.963395] pci 0000:02:00.0: supports D1 D2
[ 0.963400] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.963410] pci 0000:02:00.0: PME# disabled
[ 0.964062] pci 0000:00:04.0: bridge 32bit mmio: [0xc0000000-0xc00fffff]
[ 0.964170] pci 0000:0a:07.0: reg 10 io port: [0xa000-0xa0ff]
[ 0.964188] pci 0000:0a:07.0: reg 14 32bit mmio: [0xc0200000-0xc02000ff]
[ 0.964269] pci 0000:0a:07.0: supports D1 D2
[ 0.964274] pci 0000:0a:07.0: PME# supported from D1 D2 D3hot D3cold
[ 0.964285] pci 0000:0a:07.0: PME# disabled
[ 0.964371] pci 0000:00:14.4: transparent bridge
[ 0.964387] pci 0000:00:14.4: bridge io port: [0xa000-0xafff]
[ 0.964398] pci 0000:00:14.4: bridge 32bit mmio: [0xf0200000-0xf02fffff]
[ 0.964409] pci 0000:00:14.4: bridge 32bit mmio pref: [0xf0300000-0xf03fffff]
[ 0.964439] bus 00 -> node 0
[ 0.964451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.964907] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.965257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.965649] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.969994] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.970288] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.970575] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.970863] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.971151] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.971445] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.971733] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.972033] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.972324] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
[ 0.972733] ACPI: WMI: Mapper loaded
[ 0.972820] SCSI subsystem initialized
[ 0.972820] libata version 3.00 loaded.
[ 0.972820] usbcore: registered new interface driver usbfs
[ 0.972820] usbcore: registered new interface driver hub
[ 0.972820] usbcore: registered new device driver usb
[ 0.972820] PCI: Using ACPI for IRQ routing
[ 0.980022] Bluetooth: Core ver 2.13
[ 0.980056] NET: Registered protocol family 31
[ 0.980056] Bluetooth: HCI device and connection manager initialized
[ 0.980056] Bluetooth: HCI socket layer initialized
[ 0.980056] NET: Registered protocol family 8
[ 0.980057] NET: Registered protocol family 20
[ 0.980083] NetLabel: Initializing
[ 0.980087] NetLabel: domain hash size = 128
[ 0.980092] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.980122] NetLabel: unlabeled traffic allowed by default
[ 0.980266] AppArmor: AppArmor Filesystem Enabled
[ 0.984026] pnp: PnP ACPI init
[ 0.984044] ACPI: bus type pnp registered
[ 0.987894] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:12.0 BAR 6 (0x0-0x7ffff), disabling
[ 0.987922] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
[ 0.989011] pnp: PnP ACPI: found 10 devices
[ 0.989017] ACPI: ACPI bus type pnp unregistered
[ 0.989024] PnPBIOS: Disabled by ACPI PNP
[ 0.989047] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.989067] system 00:08: ioport range 0x1080-0x1080 has been reserved
[ 0.989074] system 00:08: ioport range 0x1200-0x120f has been reserved
[ 0.989081] system 00:08: ioport range 0x220-0x22f has been reserved
[ 0.989088] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 0.989094] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.989101] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 0.989108] system 00:08: ioport range 0x530-0x537 has been reserved
[ 0.989114] system 00:08: ioport range 0xc00-0xc01 has been reserved
[ 0.989121] system 00:08: ioport range 0xc14-0xc14 has been reserved
[ 0.989128] system 00:08: ioport range 0xc50-0xc52 has been reserved
[ 0.989134] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[ 0.989141] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[ 0.989148] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[ 0.989154] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[ 0.989161] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[ 0.989168] system 00:08: ioport range 0x8000-0x805f has been reserved
[ 0.989175] system 00:08: ioport range 0x8210-0x821f has been reserved
[ 0.989182] system 00:08: ioport range 0xf40-0xf47 has been reserved
[ 0.989189] system 00:08: ioport range 0x280-0x293 has been reserved
[ 0.989196] system 00:08: ioport range 0x87f-0x87f has been reserved
[ 0.989211] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 0.989219] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 1.024238] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.024246] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 1.024256] pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff
[ 1.024264] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 1.024275] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 1.024280] pci 0000:00:04.0: IO window: disabled
[ 1.024289] pci 0000:00:04.0: MEM window: 0xc0000000-0xc00fffff
[ 1.024297] pci 0000:00:04.0: PREFETCH window: disabled
[ 1.024307] pci 0000:00:14.4: PCI bridge, secondary bus 0000:0a
[ 1.024315] pci 0000:00:14.4: IO window: 0xa000-0xafff
[ 1.024328] pci 0000:00:14.4: MEM window: 0xf0200000-0xf02fffff
[ 1.024338] pci 0000:00:14.4: PREFETCH window: 0x000000f0300000-0x000000f03fffff
[ 1.024368] pci 0000:00:04.0: enabling device (0000 -> 0002)
[ 1.024379] pci 0000:00:04.0: setting latency timer to 64
[ 1.024397] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.024402] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 1.024408] bus: 01 index 0 io port: [0x9000-0x9fff]
[ 1.024414] bus: 01 index 1 mmio: [0xc0100000-0xc01fffff]
[ 1.024420] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[ 1.024425] bus: 01 index 3 mmio: [0x0-0x0]
[ 1.024430] bus: 02 index 0 mmio: [0x0-0x0]
[ 1.024435] bus: 02 index 1 mmio: [0xc0000000-0xc00fffff]
[ 1.024440] bus: 02 index 2 mmio: [0x0-0x0]
[ 1.024445] bus: 02 index 3 mmio: [0x0-0x0]
[ 1.024450] bus: 0a index 0 io port: [0xa000-0xafff]
[ 1.024456] bus: 0a index 1 mmio: [0xf0200000-0xf02fffff]
[ 1.024462] bus: 0a index 2 mmio: [0xf0300000-0xf03fffff]
[ 1.024467] bus: 0a index 3 io port: [0x00-0xffff]
[ 1.024472] bus: 0a index 4 mmio: [0x000000-0xffffffff]
[ 1.024492] NET: Registered protocol family 2
[ 1.036131] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.036738] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.037776] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.038474] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.038480] TCP reno registered
[ 1.044178] NET: Registered protocol family 1
[ 1.044476] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 1.528071] Switched to high resolution mode on CPU 0
[ 1.781869] it is
[ 2.580545] Freeing initrd memory: 7371k freed
[ 2.581077] cpufreq: No nForce2 chipset.
[ 2.581413] audit: initializing netlink socket (disabled)
[ 2.581465] type=2000 audit(1241020229.581:1): initialized
[ 2.599727] highmem bounce pool size: 64 pages
[ 2.599739] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.603171] VFS: Disk quotas dquot_6.5.1
[ 2.603313] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.604825] fuse init (API version 7.10)
[ 2.605045] msgmni has been set to 1727
[ 2.605482] alg: No test for stdrng (krng)
[ 2.605514] io scheduler noop registered
[ 2.605520] io scheduler anticipatory registered
[ 2.605525] io scheduler deadline registered
[ 2.605559] io scheduler cfq registered (default)
[ 2.605705] pci 0000:01:05.0: Boot video device
[ 2.611202] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 2.611269] pcieport-driver 0000:00:04.0: found MSI capability
[ 2.611322] pcieport-driver 0000:00:04.0: irq 2303 for MSI/MSI-X
[ 2.611345] pci_express 0000:00:04.0:pcie00: allocate port service
[ 2.611481] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.611503] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.613177] ACPI: AC Adapter [ADP1] (off-line)
[ 3.116030] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 3.202520] ACPI: Battery Slot [BAT0] (battery present)
[ 3.202686] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.202693] ACPI: Power Button (FF) [PWRF]
[ 3.202803] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 3.204017] ACPI: Lid Switch [LID0]
[ 3.204136] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 3.204150] ACPI: Sleep Button (CM) [SLPB]
[ 3.204259] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 3.204266] ACPI: Power Button (CM) [PWRB]
[ 3.205394] ACPI: SSDT 37EA2C1C, 022C (r1 PmRef Cpu0Ist 3000 INTL 20050228)
[ 3.206857] ACPI: SSDT 37EA29A7, 01F0 (r1 PmRef Cpu0Cst 3001 INTL 20050228)
[ 3.207751] ACPI: CPU0 (power states: C1[C1] C3[C3])
[ 3.207808] processor ACPI_CPU:00: registered as cooling_device0
[ 3.208604] ACPI: SSDT 37EA2E48, 0089 (r1 PmRef Cpu1Ist 3000 INTL 20050228)
[ 3.209339] ACPI: SSDT 37EA2B97, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228)
[ 3.210189] ACPI: CPU1 (power states: C1[C1] C3[C3])
[ 3.210235] processor ACPI_CPU:01: registered as cooling_device1
[ 3.221150] thermal LNXTHERM:01: registered as thermal_zone0
[ 3.229316] ACPI: Thermal Zone [TZS0] (33 C)
[ 3.233832] thermal LNXTHERM:02: registered as thermal_zone1
[ 3.236705] ACPI: Thermal Zone [TZS2] (24 C)
[ 3.236822] isapnp: Scanning for PnP cards...
[ 3.594157] isapnp: No Plug & Play device found
[ 3.608306] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 3.610726] brd: module loaded
[ 3.611487] loop: module loaded
[ 3.611658] Fixed MDIO Bus: probed
[ 3.611671] PPP generic driver version 2.4.2
[ 3.611811] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 3.611877] Driver 'sd' needs updating - please use bus_type methods
[ 3.611905] Driver 'sr' needs updating - please use bus_type methods
[ 3.612162] sata_sil 0000:00:12.0: version 2.3
[ 3.612223] sata_sil 0000:00:12.0: enabling device (0005 -> 0007)
[ 3.612243] sata_sil 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.612419] scsi0 : sata_sil
[ 3.612626] scsi1 : sata_sil
[ 3.613125] ata1: SATA max UDMA/100 mmio m512@0xc0507000 tf 0xc0507080 irq 22
[ 3.613134] ata2: SATA max UDMA/100 mmio m512@0xc0507000 tf 0xc05070c0 irq 22
[ 3.932065] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.986987] ata1.00: ATA-7: WDC WD1200BEVS-22RST0, 04.01G04, max UDMA/133
[ 3.986994] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.001185] ata1.00: configured for UDMA/100
[ 4.320043] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.320293] scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-2 04.0 PQ: 0 ANSI: 5
[ 4.320526] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 4.320569] sd 0:0:0:0: [sda] Write Protect is off
[ 4.320575] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.320642] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.320779] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 4.320817] sd 0:0:0:0: [sda] Write Protect is off
[ 4.320823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.320888] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.320897] sda: sda1 sda2 sda3 sda4
[ 4.408357] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.408462] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.408878] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.408948] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 4.409089] scsi2 : pata_atiixp
[ 4.409242] scsi3 : pata_atiixp
[ 4.410921] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8460 irq 14
[ 4.410928] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8468 irq 15
[ 4.572678] ata3.00: ATAPI: Optiarc DVD RW AD-7540A, 1.42, max UDMA/33
[ 4.588676] ata3.00: configured for UDMA/33
[ 4.750000] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7540A 1.42 PQ: 0 ANSI: 5
[ 4.769700] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.769708] Uniform CD-ROM driver Revision: 3.20
[ 4.769911] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.770006] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 4.771027] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.771070] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.771097] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 4.771234] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 4.771328] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0506000
[ 4.780039] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 4.780191] usb usb1: configuration #1 chosen from 1 choice
[ 4.780258] hub 1-0:1.0: USB hub found
[ 4.780279] hub 1-0:1.0: 8 ports detected
[ 4.780540] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.780570] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.780593] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 4.780691] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 4.780727] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0504000
[ 4.836183] usb usb2: configuration #1 chosen from 1 choice
[ 4.836244] hub 2-0:1.0: USB hub found
[ 4.836269] hub 2-0:1.0: 4 ports detected
[ 4.836467] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.836491] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 4.836595] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 4.836626] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0505000
[ 4.892180] usb usb3: configuration #1 chosen from 1 choice
[ 4.892242] hub 3-0:1.0: USB hub found
[ 4.892265] hub 3-0:1.0: 4 ports detected
[ 4.892482] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.892601] usbcore: registered new interface driver libusual
[ 4.892673] usbcore: registered new interface driver usbserial
[ 4.892698] USB Serial support registered for generic
[ 4.892731] usbcore: registered new interface driver usbserial_generic
[ 4.892736] usbserial: USB Serial Driver core
[ 4.892845] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 4.893268] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 4.893371] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.893383] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 4.893389] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 4.893395] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 4.893401] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 4.893775] mice: PS/2 mouse device common for all mice
[ 4.894214] rtc_cmos 00:04: RTC can wake from S4
[ 4.894301] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 4.894345] rtc0: alarms up to one month, 114 bytes nvram
[ 4.894484] device-mapper: uevent: version 1.0.3
[ 4.894716] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: <email address hidden>
[ 4.894920] device-mapper: multipath: version 1.0.5 loaded
[ 4.894927] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.895140] EISA: Probing bus 0 at eisa.0
[ 4.895157] Cannot allocate resource for EISA slot 1
[ 4.895212] Cannot allocate resource for EISA slot 8
[ 4.895217] EISA: Detected 0 cards.
[ 4.895469] cpuidle: using governor ladder
[ 4.895702] cpuidle: using governor menu
[ 4.896939] TCP cubic registered
[ 4.897186] NET: Registered protocol family 10
[ 4.898196] lo: Disabled Privacy Extensions
[ 4.899000] NET: Registered protocol family 17
[ 4.899038] Bluetooth: L2CAP ver 2.11
[ 4.899043] Bluetooth: L2CAP socket layer initialized
[ 4.899050] Bluetooth: SCO (Voice Link) ver 0.6
[ 4.899054] Bluetooth: SCO socket layer initialized
[ 4.899137] Bluetooth: RFCOMM socket layer initialized
[ 4.899155] Bluetooth: RFCOMM TTY layer initialized
[ 4.899160] Bluetooth: RFCOMM ver 1.10
[ 4.899242] Marking TSC unstable due to TSC halts in idle
[ 4.900075] Using IPI No-Shortcut mode
[ 4.900163] registered taskstats version 1
[ 4.900279] Magic number: 5:545:842
[ 4.900386] rtc_cmos 00:04: setting system clock to 2009-04-29 15:50:33 UTC (1241020233)
[ 4.900389] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.900391] EDD information not available.
[ 4.900841] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 4.900920] Freeing unused kernel memory: 532k freed
[ 4.901101] Write protecting the kernel text: 4128k
[ 4.901170] Write protecting the kernel read-only data: 1532k
[ 5.160638] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 5.160691] 8139cp 0000:0a:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 5.163618] 8139too Fast Ethernet driver 0.9.28
[ 5.163672] 8139too 0000:0a:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.165417] eth0: RealTek RTL8139 at 0xa000, 00:16:d3:65:11:ee, IRQ 23
[ 5.165420] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 5.818146] PM: Starting manual resume from disk
[ 5.818151] PM: Resume from partition 8:3
[ 5.818152] PM: Checking hibernation image.
[ 5.818417] PM: Resume from disk failed.
[ 5.849912] kjournald starting. Commit interval 5 seconds
[ 5.849952] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.912172] udev: starting version 141
[ 11.178215] ath_hal: module license 'Proprietary' taints kernel.
[ 11.179688] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 11.192720] wlan: 0.9.4
[ 11.200460] ath_pci: 0.9.4
[ 11.200519] ath_pci 0000:02:00.0: enabling device (0000 -> 0002)
[ 11.200528] ath_pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.200544] ath_pci 0000:02:00.0: setting latency timer to 64
[ 11.225038] wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13)
[ 11.225059] ath_pci 0000:02:00.0: PCI INT A disabled
[ 11.273658] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1a/device:1b/input/input6
[ 11.276785] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 11.315611] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 11.414123] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 11.456599] Linux agpgart interface v0.103
[ 11.727991] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8450, revision 0
[ 11.740234] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.909786] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.942532] hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS...
[ 12.150122] lp: driver loaded but no devices found
[ 12.219915] Adding 1052248k swap on /dev/sda3. Priority:-1 extents:1 across:1052248k
[ 12.236818] EXT3 FS on sda2, internal journal
[ 12.301227] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
[ 12.340159] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 12.658096] type=1505 audit(1241016641.255:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1855
[ 12.711181] type=1505 audit(1241016641.307:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1859
[ 12.711341] type=1505 audit(1241016641.307:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1859
[ 12.711403] type=1505 audit(1241016641.307:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1859
[ 12.711454] type=1505 audit(1241016641.307:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1859
[ 12.867152] type=1505 audit(1241016641.463:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1864
[ 12.867498] type=1505 audit(1241016641.463:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1864
[ 12.899284] type=1505 audit(1241016641.495:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1868
[ 14.659992] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.659996] Bluetooth: BNEP filters: protocol multicast
[ 14.686567] Bridge firewalling registered
[ 15.661067] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 15.748206] [drm] Initialized drm 1.1.0 20060810
[ 15.879731] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 16.013372] ppdev: user-space parallel port driver
[ 16.448812] [drm] Setting GART location based on new memory map
[ 16.449877] [drm] Loading R300 Microcode
[ 16.449912] [drm] Num pipes: 2
[ 16.449919] [drm] writeback test succeeded in 1 usecs
[ 20.401107] eth0: link down
[ 20.401401] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.668014] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x10a90000
[ 33.672021] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x10a90000
[ 441.598546] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 441.599061] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 452.140062] eth0: no IPv6 routers present
[ 3074.234052] type=1505 audit(1241019701.921:10): operation="profile_replace" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=5348
[ 3074.367219] type=1505 audit(1241019702.053:11): operation="profile_replace" name="/sbin/dhclient-script" name2="default" pid=5352
[ 3074.367793] type=1505 audit(1241019702.053:12): operation="profile_replace" name="/sbin/dhclient3" name2="default" pid=5352
[ 3074.367903] type=1505 audit(1241019702.053:13): operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=5352
[ 3074.368045] type=1505 audit(1241019702.057:14): operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=5352
[ 3074.647248] type=1505 audit(1241019702.334:15): operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=5357
[ 3074.647688] type=1505 audit(1241019702.334:16): operation="profile_replace" name="/usr/sbin/cupsd" name2="default" pid=5357
[ 3074.683104] type=1505 audit(1241019702.370:17): operation="profile_replace" name="/usr/sbin/tcpdump" name2="default" pid=5361

lsmod
Module                  Size  Used by
binfmt_misc            16776  1 
ppdev                  15620  0 
radeon                342816  2 
drm                    96296  3 radeon
bridge                 56340  0 
stp                    10500  1 bridge
bnep                   20224  2 
input_polldev          11912  0 
joydev                 18368  0 
lp                     17156  0 
parport                42220  2 ppdev,lp
snd_hda_intel         435636  3 
snd_pcm_oss            46336  0 
snd_mixer_oss          22656  1 snd_pcm_oss
snd_pcm                82948  2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy          10756  0 
snd_seq_oss            37760  0 
snd_seq_midi           14336  0 
snd_rawmidi            29696  1 snd_seq_midi
snd_seq_midi_event     15104  2 snd_seq_oss,snd_seq_midi
snd_seq                56880  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              29704  2 snd_pcm,snd_seq
snd_seq_device         14988  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    62628  15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              15200  1 snd
snd_page_alloc         16904  2 snd_hda_intel,snd_pcm
shpchp                 40212  0 
i2c_piix4              18448  0 
ati_agp                14988  0 
agpgart                42696  2 drm,ati_agp
psmouse                61972  0 
serio_raw              13316  0 
pcspkr                 10496  0 
video                  25360  0 
output                 11008  1 video
ath_pci                99224  0 
wlan                  210288  1 ath_pci
ath_hal               198864  1 ath_pci
8139too                32128  0 
8139cp                 27776  0 
mii                    13312  2 8139too,8139cp
fbcon                  46112  0 
tileblit               10752  1 fbcon
font                   16384  1 fbcon
bitblit                13824  1 fbcon
softcursor              9984  1 bitblit

dmesg
[    0.004000]       .data : 0xc0507a6f - 0xc072fe60   (2208 kB)
[    0.004000]       .text : 0xc0100000 - 0xc0507a6f   (4126 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.004017] Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.22 BogoMIPS (lpj=7466440)
[    0.004051] Security Framework initialized
[    0.004066] SELinux:  Disabled at boot.
[    0.004105] AppArmor: AppArmor initialized
[    0.004121] Mount-cache hash table entries: 512
[    0.004369] Initializing cgroup subsys ns
[    0.004378] Initializing cgroup subsys cpuacct
[    0.004384] Initializing cgroup subsys memory
[    0.004392] Initializing cgroup subsys freezer
[    0.004418] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004425] CPU: L2 cache: 2048K
[    0.004432] CPU: Physical Processor ID: 0
[    0.004436] CPU: Processor Core ID: 0
[    0.004445] using mwait in idle threads.
[    0.004462] Checking 'hlt' instruction... OK.
[    0.024009] ACPI: Core revision 20080926
[    0.030271] ACPI: Checking initramfs for custom DSDT
[    0.792670] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.834165] CPU0: Intel(R) Core(TM) Duo CPU      T2350  @ 1.86GHz stepping 0c
[    0.836002] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 3733.93 BogoMIPS (lpj=7467863)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 2048K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.921017] CPU1: Intel(R) Core(TM) Duo CPU      T2350  @ 1.86GHz stepping 0c
[    0.921059] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.924086] Brought up 2 CPUs
[    0.924093] Total of 2 processors activated (7467.15 BogoMIPS).
[    0.924182] CPU0 attaching sched-domain:
[    0.924188]  domain 0: span 0-1 level MC
[    0.924194]   groups: 0 1
[    0.924209] CPU1 attaching sched-domain:
[    0.924213]  domain 0: span 0-1 level MC
[    0.924219]   groups: 1 0
[    0.924407] net_namespace: 776 bytes
[    0.924433] Booting paravirtualized kernel on bare hardware
[    0.924840] Time: 15:50:29  Date: 04/29/09
[    0.924840] regulator: core version 0.5
[    0.924840] NET: Registered protocol family 16
[    0.924840] EISA bus registered
[    0.924840] ACPI: bus type pci registered
[    0.924840] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 11
[    0.924840] PCI: MCFG area at e0000000 reserved in E820
[    0.924840] PCI: Using MMCONFIG for extended config space
[    0.924840] PCI: Using configuration type 1 for base access
[    0.929826] ACPI: EC: Look up EC in DSDT
[    0.938455] ACPI: BIOS _OSI(Linux) query ignored
[    0.939974] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.948160] ACPI: Interpreter enabled
[    0.948172] ACPI: (supports S0 S3 S4 S5)
[    0.948215] ACPI: Using IOAPIC for interrupt routing
[    0.961136] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.961143] ACPI: EC: driver started in interrupt mode
[    0.961464] ACPI: No dock devices found.
[    0.961489] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.961714] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.961722] pci 0000:00:04.0: PME# disabled
[    0.961850] pci 0000:00:12.0: reg 10 io port: [0x8440-0x8447]
[    0.961866] pci 0000:00:12.0: reg 14 io port: [0x8430-0x8433]
[    0.961882] pci 0000:00:12.0: reg 18 io port: [0x8420-0x8427]
[    0.961897] pci 0000:00:12.0: reg 1c io port: [0x8410-0x8413]
[    0.961913] pci 0000:00:12.0: reg 20 io port: [0x8400-0x840f]
[    0.961929] pci 0000:00:12.0: reg 24 32bit mmio: [0xc0507000-0xc05071ff]
[    0.961945] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x07ffff]
[    0.961970] pci 0000:00:12.0: supports D1 D2
[    0.962023] pci 0000:00:13.0: reg 10 32bit mmio: [0xc0504000-0xc0504fff]
[    0.962133] pci 0000:00:13.1: reg 10 32bit mmio: [0xc0505000-0xc0505fff]
[    0.962265] pci 0000:00:13.2: reg 10 32bit mmio: [0xc0506000-0xc0506fff]
[    0.962346] pci 0000:00:13.2: supports D1 D2
[    0.962351] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.962361] pci 0000:00:13.2: PME# disabled
[    0.962419] pci 0000:00:14.0: reg 10 io port: [0x8450-0x845f]
[    0.962435] pci 0000:00:14.0: reg 14 32bit mmio: [0xc0507400-0xc05077ff]
[    0.962495] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.962562] pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7]
[    0.962578] pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7]
[    0.962593] pci 0000:00:14.1: reg 18 io port: [0x8470-0x8477]
[    0.962609] pci 0000:00:14.1: reg 1c io port: [0x8480-0x8483]
[    0.962624] pci 0000:00:14.1: reg 20 io port: [0x8460-0x846f]
[    0.962763] pci 0000:00:14.2: reg 10 64bit mmio: [0xc0500000-0xc0503fff]
[    0.962835] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.962845] pci 0000:00:14.2: PME# disabled
[    0.963108] pci 0000:01:05.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
[    0.963119] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
[    0.963131] pci 0000:01:05.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff]
[    0.963158] pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    0.963173] pci 0000:01:05.0: supports D1 D2
[    0.963226] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[    0.963235] pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff]
[    0.963244] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff]
[    0.963329] pci 0000:02:00.0: reg 10 64bit mmio: [0xc0000000-0xc000ffff]
[    0.963395] pci 0000:02:00.0: supports D1 D2
[    0.963400] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[    0.963410] pci 0000:02:00.0: PME# disabled
[    0.964062] pci 0000:00:04.0: bridge 32bit mmio: [0xc0000000-0xc00fffff]
[    0.964170] pci 0000:0a:07.0: reg 10 io port: [0xa000-0xa0ff]
[    0.964188] pci 0000:0a:07.0: reg 14 32bit mmio: [0xc0200000-0xc02000ff]
[    0.964269] pci 0000:0a:07.0: supports D1 D2
[    0.964274] pci 0000:0a:07.0: PME# supported from D1 D2 D3hot D3cold
[    0.964285] pci 0000:0a:07.0: PME# disabled
[    0.964371] pci 0000:00:14.4: transparent bridge
[    0.964387] pci 0000:00:14.4: bridge io port: [0xa000-0xafff]
[    0.964398] pci 0000:00:14.4: bridge 32bit mmio: [0xf0200000-0xf02fffff]
[    0.964409] pci 0000:00:14.4: bridge 32bit mmio pref: [0xf0300000-0xf03fffff]
[    0.964439] bus 00 -> node 0
[    0.964451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.964907] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[    0.965257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.965649] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.969994] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[    0.970288] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[    0.970575] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[    0.970863] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[    0.971151] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[    0.971445] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[    0.971733] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[    0.972033] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[    0.972324] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
[    0.972733] ACPI: WMI: Mapper loaded
[    0.972820] SCSI subsystem initialized
[    0.972820] libata version 3.00 loaded.
[    0.972820] usbcore: registered new interface driver usbfs
[    0.972820] usbcore: registered new interface driver hub
[    0.972820] usbcore: registered new device driver usb
[    0.972820] PCI: Using ACPI for IRQ routing
[    0.980022] Bluetooth: Core ver 2.13
[    0.980056] NET: Registered protocol family 31
[    0.980056] Bluetooth: HCI device and connection manager initialized
[    0.980056] Bluetooth: HCI socket layer initialized
[    0.980056] NET: Registered protocol family 8
[    0.980057] NET: Registered protocol family 20
[    0.980083] NetLabel: Initializing
[    0.980087] NetLabel:  domain hash size = 128
[    0.980092] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.980122] NetLabel:  unlabeled traffic allowed by default
[    0.980266] AppArmor: AppArmor Filesystem Enabled
[    0.984026] pnp: PnP ACPI init
[    0.984044] ACPI: bus type pnp registered
[    0.987894] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:12.0 BAR 6 (0x0-0x7ffff), disabling
[    0.987922] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
[    0.989011] pnp: PnP ACPI: found 10 devices
[    0.989017] ACPI: ACPI bus type pnp unregistered
[    0.989024] PnPBIOS: Disabled by ACPI PNP
[    0.989047] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.989067] system 00:08: ioport range 0x1080-0x1080 has been reserved
[    0.989074] system 00:08: ioport range 0x1200-0x120f has been reserved
[    0.989081] system 00:08: ioport range 0x220-0x22f has been reserved
[    0.989088] system 00:08: ioport range 0x40b-0x40b has been reserved
[    0.989094] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.989101] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[    0.989108] system 00:08: ioport range 0x530-0x537 has been reserved
[    0.989114] system 00:08: ioport range 0xc00-0xc01 has been reserved
[    0.989121] system 00:08: ioport range 0xc14-0xc14 has been reserved
[    0.989128] system 00:08: ioport range 0xc50-0xc52 has been reserved
[    0.989134] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[    0.989141] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[    0.989148] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[    0.989154] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[    0.989161] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[    0.989168] system 00:08: ioport range 0x8000-0x805f has been reserved
[    0.989175] system 00:08: ioport range 0x8210-0x821f has been reserved
[    0.989182] system 00:08: ioport range 0xf40-0xf47 has been reserved
[    0.989189] system 00:08: ioport range 0x280-0x293 has been reserved
[    0.989196] system 00:08: ioport range 0x87f-0x87f has been reserved
[    0.989211] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[    0.989219] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[    1.024238] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    1.024246] pci 0000:00:01.0:   IO window: 0x9000-0x9fff
[    1.024256] pci 0000:00:01.0:   MEM window: 0xc0100000-0xc01fffff
[    1.024264] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    1.024275] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[    1.024280] pci 0000:00:04.0:   IO window: disabled
[    1.024289] pci 0000:00:04.0:   MEM window: 0xc0000000-0xc00fffff
[    1.024297] pci 0000:00:04.0:   PREFETCH window: disabled
[    1.024307] pci 0000:00:14.4: PCI bridge, secondary bus 0000:0a
[    1.024315] pci 0000:00:14.4:   IO window: 0xa000-0xafff
[    1.024328] pci 0000:00:14.4:   MEM window: 0xf0200000-0xf02fffff
[    1.024338] pci 0000:00:14.4:   PREFETCH window: 0x000000f0300000-0x000000f03fffff
[    1.024368] pci 0000:00:04.0: enabling device (0000 -> 0002)
[    1.024379] pci 0000:00:04.0: setting latency timer to 64
[    1.024397] bus: 00 index 0 io port: [0x00-0xffff]
[    1.024402] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    1.024408] bus: 01 index 0 io port: [0x9000-0x9fff]
[    1.024414] bus: 01 index 1 mmio: [0xc0100000-0xc01fffff]
[    1.024420] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[    1.024425] bus: 01 index 3 mmio: [0x0-0x0]
[    1.024430] bus: 02 index 0 mmio: [0x0-0x0]
[    1.024435] bus: 02 index 1 mmio: [0xc0000000-0xc00fffff]
[    1.024440] bus: 02 index 2 mmio: [0x0-0x0]
[    1.024445] bus: 02 index 3 mmio: [0x0-0x0]
[    1.024450] bus: 0a index 0 io port: [0xa000-0xafff]
[    1.024456] bus: 0a index 1 mmio: [0xf0200000-0xf02fffff]
[    1.024462] bus: 0a index 2 mmio: [0xf0300000-0xf03fffff]
[    1.024467] bus: 0a index 3 io port: [0x00-0xffff]
[    1.024472] bus: 0a index 4 mmio: [0x000000-0xffffffff]
[    1.024492] NET: Registered protocol family 2
[    1.036131] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.036738] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.037776] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.038474] TCP: Hash tables configured (established 131072 bind 65536)
[    1.038480] TCP reno registered
[    1.044178] NET: Registered protocol family 1
[    1.044476] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[    1.528071] Switched to high resolution mode on CPU 0
[    1.781869]  it is
[    2.580545] Freeing initrd memory: 7371k freed
[    2.581077] cpufreq: No nForce2 chipset.
[    2.581413] audit: initializing netlink socket (disabled)
[    2.581465] type=2000 audit(1241020229.581:1): initialized
[    2.599727] highmem bounce pool size: 64 pages
[    2.599739] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    2.603171] VFS: Disk quotas dquot_6.5.1
[    2.603313] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.604825] fuse init (API version 7.10)
[    2.605045] msgmni has been set to 1727
[    2.605482] alg: No test for stdrng (krng)
[    2.605514] io scheduler noop registered
[    2.605520] io scheduler anticipatory registered
[    2.605525] io scheduler deadline registered
[    2.605559] io scheduler cfq registered (default)
[    2.605705] pci 0000:01:05.0: Boot video device
[    2.611202] pcieport-driver 0000:00:04.0: setting latency timer to 64
[    2.611269] pcieport-driver 0000:00:04.0: found MSI capability
[    2.611322] pcieport-driver 0000:00:04.0: irq 2303 for MSI/MSI-X
[    2.611345] pci_express 0000:00:04.0:pcie00: allocate port service
[    2.611481] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.611503] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.613177] ACPI: AC Adapter [ADP1] (off-line)
[    3.116030] ACPI: EC: missing confirmations, switch off interrupt mode.
[    3.202520] ACPI: Battery Slot [BAT0] (battery present)
[    3.202686] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    3.202693] ACPI: Power Button (FF) [PWRF]
[    3.202803] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    3.204017] ACPI: Lid Switch [LID0]
[    3.204136] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    3.204150] ACPI: Sleep Button (CM) [SLPB]
[    3.204259] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    3.204266] ACPI: Power Button (CM) [PWRB]
[    3.205394] ACPI: SSDT 37EA2C1C, 022C (r1  PmRef  Cpu0Ist     3000 INTL 20050228)
[    3.206857] ACPI: SSDT 37EA29A7, 01F0 (r1  PmRef  Cpu0Cst     3001 INTL 20050228)
[    3.207751] ACPI: CPU0 (power states: C1[C1] C3[C3])
[    3.207808] processor ACPI_CPU:00: registered as cooling_device0
[    3.208604] ACPI: SSDT 37EA2E48, 0089 (r1  PmRef  Cpu1Ist     3000 INTL 20050228)
[    3.209339] ACPI: SSDT 37EA2B97, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050228)
[    3.210189] ACPI: CPU1 (power states: C1[C1] C3[C3])
[    3.210235] processor ACPI_CPU:01: registered as cooling_device1
[    3.221150] thermal LNXTHERM:01: registered as thermal_zone0
[    3.229316] ACPI: Thermal Zone [TZS0] (33 C)
[    3.233832] thermal LNXTHERM:02: registered as thermal_zone1
[    3.236705] ACPI: Thermal Zone [TZS2] (24 C)
[    3.236822] isapnp: Scanning for PnP cards...
[    3.594157] isapnp: No Plug & Play device found
[    3.608306] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    3.610726] brd: module loaded
[    3.611487] loop: module loaded
[    3.611658] Fixed MDIO Bus: probed
[    3.611671] PPP generic driver version 2.4.2
[    3.611811] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    3.611877] Driver 'sd' needs updating - please use bus_type methods
[    3.611905] Driver 'sr' needs updating - please use bus_type methods
[    3.612162] sata_sil 0000:00:12.0: version 2.3
[    3.612223] sata_sil 0000:00:12.0: enabling device (0005 -> 0007)
[    3.612243] sata_sil 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    3.612419] scsi0 : sata_sil
[    3.612626] scsi1 : sata_sil
[    3.613125] ata1: SATA max UDMA/100 mmio m512@0xc0507000 tf 0xc0507080 irq 22
[    3.613134] ata2: SATA max UDMA/100 mmio m512@0xc0507000 tf 0xc05070c0 irq 22
[    3.932065] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.986987] ata1.00: ATA-7: WDC WD1200BEVS-22RST0, 04.01G04, max UDMA/133
[    3.986994] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    4.001185] ata1.00: configured for UDMA/100
[    4.320043] ata2: SATA link down (SStatus 0 SControl 300)
[    4.320293] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-2 04.0 PQ: 0 ANSI: 5
[    4.320526] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[    4.320569] sd 0:0:0:0: [sda] Write Protect is off
[    4.320575] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.320642] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.320779] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[    4.320817] sd 0:0:0:0: [sda] Write Protect is off
[    4.320823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.320888] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.320897]  sda: sda1 sda2 sda3 sda4
[    4.408357] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.408462] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.408878] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.408948] pata_atiixp 0000:00:14.1: setting latency timer to 64
[    4.409089] scsi2 : pata_atiixp
[    4.409242] scsi3 : pata_atiixp
[    4.410921] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8460 irq 14
[    4.410928] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8468 irq 15
[    4.572678] ata3.00: ATAPI: Optiarc DVD RW AD-7540A, 1.42, max UDMA/33
[    4.588676] ata3.00: configured for UDMA/33
[    4.750000] scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7540A  1.42 PQ: 0 ANSI: 5
[    4.769700] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.769708] Uniform CD-ROM driver Revision: 3.20
[    4.769911] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    4.770006] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    4.771027] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.771070] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    4.771097] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    4.771234] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[    4.771328] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0506000
[    4.780039] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    4.780191] usb usb1: configuration #1 chosen from 1 choice
[    4.780258] hub 1-0:1.0: USB hub found
[    4.780279] hub 1-0:1.0: 8 ports detected
[    4.780540] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.780570] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    4.780593] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    4.780691] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    4.780727] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0504000
[    4.836183] usb usb2: configuration #1 chosen from 1 choice
[    4.836244] hub 2-0:1.0: USB hub found
[    4.836269] hub 2-0:1.0: 4 ports detected
[    4.836467] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    4.836491] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    4.836595] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    4.836626] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0505000
[    4.892180] usb usb3: configuration #1 chosen from 1 choice
[    4.892242] hub 3-0:1.0: USB hub found
[    4.892265] hub 3-0:1.0: 4 ports detected
[    4.892482] uhci_hcd: USB Universal Host Controller Interface driver
[    4.892601] usbcore: registered new interface driver libusual
[    4.892673] usbcore: registered new interface driver usbserial
[    4.892698] USB Serial support registered for generic
[    4.892731] usbcore: registered new interface driver usbserial_generic
[    4.892736] usbserial: USB Serial Driver core
[    4.892845] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    4.893268] i8042.c: Detected active multiplexing controller, rev 1.1.
[    4.893371] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.893383] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    4.893389] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    4.893395] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    4.893401] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    4.893775] mice: PS/2 mouse device common for all mice
[    4.894214] rtc_cmos 00:04: RTC can wake from S4
[    4.894301] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    4.894345] rtc0: alarms up to one month, 114 bytes nvram
[    4.894484] device-mapper: uevent: version 1.0.3
[    4.894716] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    4.894920] device-mapper: multipath: version 1.0.5 loaded
[    4.894927] device-mapper: multipath round-robin: version 1.0.0 loaded
[    4.895140] EISA: Probing bus 0 at eisa.0
[    4.895157] Cannot allocate resource for EISA slot 1
[    4.895212] Cannot allocate resource for EISA slot 8
[    4.895217] EISA: Detected 0 cards.
[    4.895469] cpuidle: using governor ladder
[    4.895702] cpuidle: using governor menu
[    4.896939] TCP cubic registered
[    4.897186] NET: Registered protocol family 10
[    4.898196] lo: Disabled Privacy Extensions
[    4.899000] NET: Registered protocol family 17
[    4.899038] Bluetooth: L2CAP ver 2.11
[    4.899043] Bluetooth: L2CAP socket layer initialized
[    4.899050] Bluetooth: SCO (Voice Link) ver 0.6
[    4.899054] Bluetooth: SCO socket layer initialized
[    4.899137] Bluetooth: RFCOMM socket layer initialized
[    4.899155] Bluetooth: RFCOMM TTY layer initialized
[    4.899160] Bluetooth: RFCOMM ver 1.10
[    4.899242] Marking TSC unstable due to TSC halts in idle
[    4.900075] Using IPI No-Shortcut mode
[    4.900163] registered taskstats version 1
[    4.900279]   Magic number: 5:545:842
[    4.900386] rtc_cmos 00:04: setting system clock to 2009-04-29 15:50:33 UTC (1241020233)
[    4.900389] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.900391] EDD information not available.
[    4.900841] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    4.900920] Freeing unused kernel memory: 532k freed
[    4.901101] Write protecting the kernel text: 4128k
[    4.901170] Write protecting the kernel read-only data: 1532k
[    5.160638] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    5.160691] 8139cp 0000:0a:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    5.163618] 8139too Fast Ethernet driver 0.9.28
[    5.163672] 8139too 0000:0a:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    5.165417] eth0: RealTek RTL8139 at 0xa000, 00:16:d3:65:11:ee, IRQ 23
[    5.165420] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[    5.818146] PM: Starting manual resume from disk
[    5.818151] PM: Resume from partition 8:3
[    5.818152] PM: Checking hibernation image.
[    5.818417] PM: Resume from disk failed.
[    5.849912] kjournald starting.  Commit interval 5 seconds
[    5.849952] EXT3-fs: mounted filesystem with ordered data mode.
[   10.912172] udev: starting version 141
[   11.178215] ath_hal: module license 'Proprietary' taints kernel.
[   11.179688] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[   11.192720] wlan: 0.9.4
[   11.200460] ath_pci: 0.9.4
[   11.200519] ath_pci 0000:02:00.0: enabling device (0000 -> 0002)
[   11.200528] ath_pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.200544] ath_pci 0000:02:00.0: setting latency timer to 64
[   11.225038] wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13)
[   11.225059] ath_pci 0000:02:00.0: PCI INT A disabled
[   11.273658] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1a/device:1b/input/input6
[   11.276785] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   11.315611] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   11.414123] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   11.456599] Linux agpgart interface v0.103
[   11.727991] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8450, revision 0
[   11.740234] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.909786] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.942532] hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS...
[   12.150122] lp: driver loaded but no devices found
[   12.219915] Adding 1052248k swap on /dev/sda3.  Priority:-1 extents:1 across:1052248k
[   12.236818] EXT3 FS on sda2, internal journal
[   12.301227] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
[   12.340159] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[   12.658096] type=1505 audit(1241016641.255:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1855
[   12.711181] type=1505 audit(1241016641.307:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1859
[   12.711341] type=1505 audit(1241016641.307:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1859
[   12.711403] type=1505 audit(1241016641.307:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1859
[   12.711454] type=1505 audit(1241016641.307:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1859
[   12.867152] type=1505 audit(1241016641.463:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1864
[   12.867498] type=1505 audit(1241016641.463:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1864
[   12.899284] type=1505 audit(1241016641.495:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1868
[   14.659992] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.659996] Bluetooth: BNEP filters: protocol multicast
[   14.686567] Bridge firewalling registered
[   15.661067] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   15.748206] [drm] Initialized drm 1.1.0 20060810
[   15.879731] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[   16.013372] ppdev: user-space parallel port driver
[   16.448812] [drm] Setting GART location based on new memory map
[   16.449877] [drm] Loading R300 Microcode
[   16.449912] [drm] Num pipes: 2
[   16.449919] [drm] writeback test succeeded in 1 usecs
[   20.401107] eth0: link down
[   20.401401] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   32.668014] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x10a90000
[   33.672021] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x10a90000
[  441.598546] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  441.599061] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  452.140062] eth0: no IPv6 routers present
[ 3074.234052] type=1505 audit(1241019701.921:10): operation="profile_replace" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=5348
[ 3074.367219] type=1505 audit(1241019702.053:11): operation="profile_replace" name="/sbin/dhclient-script" name2="default" pid=5352
[ 3074.367793] type=1505 audit(1241019702.053:12): operation="profile_replace" name="/sbin/dhclient3" name2="default" pid=5352
[ 3074.367903] type=1505 audit(1241019702.053:13): operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=5352
[ 3074.368045] type=1505 audit(1241019702.057:14): operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=5352
[ 3074.647248] type=1505 audit(1241019702.334:15): operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=5357
[ 3074.647688] type=1505 audit(1241019702.334:16): operation="profile_replace" name="/usr/sbin/cupsd" name2="default" pid=5357
[ 3074.683104] type=1505 audit(1241019702.370:17): operation="profile_replace" name="/usr/sbin/tcpdump" name2="default" pid=5361

Revision history for this message

Shahar Or (mightyiam) said on 2009-04-29:

#7

Try to install the linux-restricted-modules package and then doing 'sudo modprobe -r ath_pci' and 'sudo modprobe ath5k' and paste outputs here and dmesg after that also.

Revision history for this message

Shahar Or (mightyiam) said on 2009-04-29:

#8

http://madberry.org/2008/08/how-to-get-atheros-ar242x-wireless-to-work-2/

This one's long but hey...

Revision history for this message

Michalxo (michalxo) said on 2009-05-10:

#9

Hi all,
I have the same problem on same machine (I think) as Roadrash has. FS Amilo li1718. After upgrading from 8.10 to 9.04 wifi stopped working. Sometimes it works, sometimes it won't find ethernet AR242x. There was some problem wifi drivers as usuall, but roadrashe's script solved it for me. Now there is only this one problem of finding/ not finding the HW.
I am posting outputs in files. Few are same.
Cheers Mich

Revision history for this message

Michalxo (michalxo) said on 2009-05-10:

#10

Outputs download here:
http://www.sendspace.com/file/1mzvru

Revision history for this message

Mark Rijckenberg (markrijckenberg) said on 2009-05-10:

#11

Hi,

Please try the 4-step-procedure at the end of this link and then reboot:

http://futuredesktop.org/jaunty/amilo_1718_wireless_in_linux.txt

Regards,

Mark

Revision history for this message

Michalxo (michalxo) said on 2009-05-10:

#12

No, not working for me Mark :(
Btw wifi works, but only after it's found by system...
lspci shows this
~$ lspci
00:00.0 Host bridge: ATI Technologies Inc Device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80)
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83)
00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80)
00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
0a:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

No atheros wireless device :( Bug has to be somewhere in booting imo..
But thanks for fast respond

Revision history for this message

Shahar Or (mightyiam) said on 2009-05-10:

#13

On א', 2009-05-10 at 20:28 +0000, Michal T wrote:
> No atheros wireless device :( Bug has to be somewhere in booting imo..
> But thanks for fast respond

Dear Michal T,

I think that thus should be reported as a bug. Perhaps it'll get the
attension it deserves that way.

You can run the command 'ubuntu-bug linux' to file a bug on the kernel.
It will attach relevant system information to the report for you.

Many blessings.
--
שחר אור | 050-7966664 | http://www.shahar-or.co.il
*** שיעורים פרטיים בלינוקס ותכנה חופשית ***

Revision history for this message

Michalxo (michalxo) said on 2009-05-10:

#14

Thanks for pointing me out Shahar Or.
If anyone has same problem like me, here is my bug link:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/374608

Cheers Mich

Revision history for this message

roadrash (roadrash) said on 2009-11-28:

#15

lots of working fixes here: http://www.amilo-forum.com/forum,9,-Linux+Unix+BSD.html

Ubuntu
gnome-nettool package

How to enable wireless and wireless key combination on Fujitsu Siemens AMILO Li 1718 laptop in Ubuntu 9.04 final - Jaunty

Question information

This question was reopened

Can you help with this problem?

Subscribers

Ubuntugnome-nettool package

How to enable wireless and wireless key combination on Fujitsu Siemens AMILO Li 1718 laptop in Ubuntu 9.04 final - Jaunty

Question information

Related bugs

Related FAQ:

This question was reopened

Can you help with this problem?

Subscribers

Ubuntu
gnome-nettool package