rtl8812au-dkms package on UBUNTU 20.04 re: Launchpad question #690967 m-hampl request

here's Mr's m-hampl requested commands OUTPUT:

$ sudo apt-get update; sudo apt-get install usbutils pciutils hwinfo grep rfkill; sudo lshw -C network; rfkill list; sudo iwlist scan | grep -Ei 'chan|ssid'; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nnk | grep -iA2 net; lsusb; nmcli g; sudo lshw -short; uname -a; sudo updatedb; dmesg | grep -E '02:00|80211|acx|at76|ath|b43|bcm|brcm|CX|eth|ipw|ireless|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|ound|p54|prism|rror|rtl|RTL|rt2|RT2|rt3|RT3|rt5|RT5|rt6|RT6|rt7|RT7|usb|witch|wl';sudo dmidecode|grep -E 'anufact|roduct|erial|elease'; iwconfig; grep -E '80211|acx|at76|ath|b43|bcm|brcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|wmi|witch|wl' /etc/modprobe.d/*; cat /var/lib/NetworkManager/NetworkManager.state; sudo hwinfo --netcard ; ps -aux|grep -E 'wpa|icd|etwork'; netstat -rn ; cat /etc/resolv.conf; ls -lia /boot; grep tmpfs /etc/fstab; ubuntu-support-status; sudo update-pciids; sudo update-usbids; sudo lsmod
[sudo] password for peter:
Hit:1 http://archive.canonical.com/ubuntu focal InRelease
Hit:2 http://archive.ubuntu.com/ubuntu focal InRelease
Hit:3 http://archive.ubuntu.com/ubuntu focal-updates InRelease
Hit:4 http://archive.ubuntu.com/ubuntu focal-backports InRelease
Hit:5 http://archive.ubuntu.com/ubuntu focal-security InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version (3.4-1).
pciutils is already the newest version (1:3.6.4-1).
rfkill is already the newest version (2.34-0.1ubuntu9).
usbutils is already the newest version (1:012-2).
hwinfo is already the newest version (21.68-1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
  *-network
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:01:00.0
       logical name: enp1s0
       version: 06
       serial: 74:d4:35:b0:0e:a7
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII
       resources: irq:43 ioport:e000(size=256) memory:fea00000-fea00fff memory:d0800000-d0803fff
  *-network
       description: Wireless interface
       physical id: 1
       bus info: usb@6:1
       logical name: wlxc8d7190aa971
       serial: c8:d7:19:0a:a9:71
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rt2800usb driverversion=5.4.0-31-generic firmware=0.36 ip=192.168.0.101 link=yes multicast=yes wireless=IEEE 802.11
0: phy1: Wireless LAN
 Soft blocked: no
 Hard blocked: no
enp1s0 Interface doesn't support scanning.

lo Interface doesn't support scanning.

wlxc8d7190aa971 Failed to read scan data : Resource temporarily unavailable

cat: /etc/network/interfaces: No such file or directory
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=20.04
DISTRIB_CODENAME=focal
DISTRIB_DESCRIPTION="Ubuntu 20.04 LTS"
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
 Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet [1458:e000]
 Kernel driver in use: r8169
 Kernel modules: r8169
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 13b1:003f Linksys WUSB6300 802.11a/b/g/n/ac Wireless Adapter [Realtek RTL8812AU]
Bus 002 Device 002: ID 1307:0165 Transcend Information, Inc. 2GB/4GB/8GB Flash Drive
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0603:8122 Novatek Microelectronics Corp. USB Camera
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 045e:00a4 Microsoft Corp. Compact Optical Mouse, model 1016
Bus 003 Device 002: ID 06bd:208f AGFA-Gevaert NV SnapScan e50
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 002: ID 174c:5106 ASMedia Technology Inc. ASM1051 SATA 3Gb/s bridge
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 006 Device 002: ID 13b1:003b Linksys AE3000 802.11abgn (3x3) Wireless Adapter [Ralink RT3573]
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 002: ID 0bc2:a313 Seagate RSS LLC Wireless
Bus 011 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
STATE CONNECTIVITY WIFI-HW WIFI WWAN-HW WWAN
connected full enabled enabled enabled enabled
H/W path Device Class Description
======================================================================
                                            system To be filled by O.E.M
/0 bus F2A88XM-D3H
/0/0 memory 64KiB BIOS
/0/23 memory 8GiB System Memory
/0/23/0 memory [empty]
/0/23/1 memory 4GiB DIMM DDR3 Synchr
/0/23/2 memory [empty]
/0/23/3 memory 4GiB DIMM DDR3 Synchr
/0/2f memory 256KiB L1 cache
/0/30 memory 4MiB L2 cache
/0/39 processor AMD A8-7600 Radeon R7
/0/100 bridge Family 15h (Models 30
/0/100/0.2 generic Family 15h (Models 30
/0/100/1 display Kaveri [Radeon R7 Gra
/0/100/1.1 multimedia Kaveri HDMI/DP Audio
/0/100/3.1 bridge Family 15h (Models 30
/0/100/3.1/0 enp1s0 network RTL8111/8168/8411 PCI
/0/100/3.2 bridge Family 15h (Models 30
/0/100/3.2/0 bus uPD720202 USB 3.0 Hos
/0/100/3.2/0/0 usb10 bus xHCI Host Controller
/0/100/3.2/0/1 usb11 bus xHCI Host Controller
/0/100/3.2/0/1/1 scsi10 storage Wireless
/0/100/3.2/0/1/1/0.0.0 /dev/sdg disk 1TB Wireless
/0/100/3.2/0/1/1/0.0.0/1 /dev/sdg1 volume 931GiB Windows NTFS v
/0/100/10 bus FCH USB XHCI Controll
/0/100/10/0 usb6 bus xHCI Host Controller
/0/100/10/0/1 generic Linksys AE3000
/0/100/10/1 usb7 bus xHCI Host Controller
/0/100/10.1 bus FCH USB XHCI Controll
/0/100/10.1/0 usb8 bus xHCI Host Controller
/0/100/10.1/1 usb9 bus xHCI Host Controller
/0/100/10.1/1/1 scsi9 storage AS2105
/0/100/10.1/1/1/0.0.0 /dev/sdf disk 750GB 00BPVT-22HXZT1
/0/100/10.1/1/1/0.0.0/1 /dev/sdf1 volume 449GiB Windows FAT vo
/0/100/10.1/1/1/0.0.0/2 /dev/sdf2 volume 196GiB EXT4 volume
/0/100/11 scsi0 storage FCH SATA Controller [
/0/100/11/0 /dev/cdrom disk iHAS124 E
/0/100/11/1 /dev/sda disk 500GB WDC WD5000AAKS-
/0/100/11/1/0 /dev/sda disk 500GB
/0/100/11/1/0/1 /dev/sda1 volume 167GiB EXT4 volume
/0/100/11/1/0/2 /dev/sda2 volume 32GiB Extended partit
/0/100/11/1/0/2/5 volume 32GiB Windows FAT vol
/0/100/11/2 /dev/sdb disk 500GB WDC WD5001AALS-
/0/100/11/2/1 /dev/sdb1 volume 111GiB EXT3 volume
/0/100/11/2/2 /dev/sdb2 volume 450MiB Windows NTFS v
/0/100/11/2/3 /dev/sdb3 volume 14GiB Extended partit
/0/100/11/2/3/5 /dev/sdb5 volume 14GiB Windows FAT vol
/0/100/11/3 /dev/sdc disk 1TB WDC WD1004FBYZ-0
/0/100/11/3/0 /dev/sdc disk 1TB
/0/100/11/3/0/1 /dev/sdc1 volume 186GiB EXT4 volume
/0/100/11/3/0/2 /dev/sdc2 volume 37GiB Linux swap volu
/0/100/11/0.0.0 /dev/sdd disk 1TB WDC WD10EFRX-68F
/0/100/11/0.0.0/0 /dev/sdd disk 1TB
/0/100/11/0.0.0/0/1 /dev/sdd1 volume 931GiB Windows NTFS v
/0/100/12 bus FCH USB OHCI Controll
/0/100/12/1 usb3 bus OHCI PCI host control
/0/100/12/1/1 generic SNAPSCAN e50
/0/100/12/1/4 input Microsoft(R) Compact
/0/100/12.2 bus FCH USB EHCI Controll
/0/100/12.2/1 usb1 bus EHCI Host Controller
/0/100/12.2/1/3 multimedia USB Camera
/0/100/13 bus FCH USB OHCI Controll
/0/100/13/1 usb4 bus OHCI PCI host control
/0/100/13.2 bus FCH USB EHCI Controll
/0/100/13.2/1 usb2 bus EHCI Host Controller
/0/100/13.2/1/3 scsi8 storage TS32GSSD34E-M
/0/100/13.2/1/3/0.0.0 /dev/sde disk 32GB TS32GSSD34E-M
/0/100/13.2/1/3/0.0.0/0 /dev/sde disk 32GB
/0/100/13.2/1/3/0.0.0/0/1 /dev/sde1 volume 30GiB Windows FAT vol
/0/100/13.2/1/5 generic WUSB6300
/0/100/14 bus FCH SMBus Controller
/0/100/14.2 multimedia FCH Azalia Controller
/0/100/14.3 bridge FCH LPC Bridge
/0/100/14.4 bridge FCH PCI Bridge
/0/100/14.5 bus FCH USB OHCI Controll
/0/100/14.5/1 usb5 bus OHCI PCI host control
/0/101 bridge Family 15h (Models 30
/0/102 bridge Family 15h (Models 30
/0/103 bridge Family 15h (Models 30
/0/104 bridge Family 15h (Models 30
/0/105 bridge Family 15h (Models 30
/0/106 bridge Family 15h (Models 30
/0/107 bridge Family 15h (Models 30
/0/108 bridge Family 15h (Models 30
/0/109 bridge Family 15h (Models 30
/0/1 system PnP device PNP0c01
/0/2 system PnP device PNP0c02
/0/3 system PnP device PNP0c02
/0/4 system PnP device PNP0c02
/0/5 input PnP device PNP0303
/0/6 communication PnP device PNP0501
/0/7 system PnP device PNP0c02
/0/8 system PnP device PNP0b00
/0/9 system PnP device PNP0c02
/0/a system PnP device PNP0c02
/1 wlxc8d7190aa971 network Wireless interface
Linux peter-ubuntu-20 5.4.0-31-generic #35-Ubuntu SMP Thu May 7 20:20:34 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
sudo: updatedb: command not found
[ 0.006959] found SMP MP-table at [mem 0x000fd6f0-0x000fd6ff]
[ 0.032715] No NUMA configuration found
[ 0.127902] APIC: Switch to symmetric I/O mode setup
[ 0.180429] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.355510] pci 0000:02:00.0: [1912:0015] type 00 class 0x0c0330
[ 0.355553] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe901fff 64bit]
[ 0.355720] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.360238] usbcore: registered new interface driver usbfs
[ 0.360238] usbcore: registered new interface driver hub
[ 0.360238] usbcore: registered new device driver usb
[ 0.369048] clocksource: Switched to clocksource tsc-early
[ 0.406709] pnp: PnP ACPI: found 10 devices
[ 0.444877] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x662 took 26990 usecs
[ 0.472866] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x662 took 27097 usecs
[ 0.500871] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x662 took 27065 usecs
[ 0.716030] pci 0000:00:00.2: AMD-Vi: Applying ATS write check workaround
[ 0.718741] pci 0000:02:00.0: Adding to iommu group 2
[ 0.719370] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[ 0.777454] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.794705] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.794709] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.794712] usb usb1: Product: EHCI Host Controller
[ 0.794715] usb usb1: Manufacturer: Linux 5.4.0-31-generic ehci_hcd
[ 0.794717] usb usb1: SerialNumber: 0000:00:12.2
[ 0.795260] hub 1-0:1.0: USB hub found
[ 0.796045] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.810711] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.810714] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.810717] usb usb2: Product: EHCI Host Controller
[ 0.810720] usb usb2: Manufacturer: Linux 5.4.0-31-generic ehci_hcd
[ 0.810723] usb usb2: SerialNumber: 0000:00:13.2
[ 0.811244] hub 2-0:1.0: USB hub found
[ 0.874716] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 0.874721] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.874724] usb usb3: Product: OHCI PCI host controller
[ 0.874727] usb usb3: Manufacturer: Linux 5.4.0-31-generic ohci_hcd
[ 0.874730] usb usb3: SerialNumber: 0000:00:12.0
[ 0.875269] hub 3-0:1.0: USB hub found
[ 0.938738] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 0.938743] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.938747] usb usb4: Product: OHCI PCI host controller
[ 0.938749] usb usb4: Manufacturer: Linux 5.4.0-31-generic ohci_hcd
[ 0.938752] usb usb4: SerialNumber: 0000:00:13.0
[ 0.939287] hub 4-0:1.0: USB hub found
[ 1.002733] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 1.002738] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.002742] usb usb5: Product: OHCI PCI host controller
[ 1.002744] usb usb5: Manufacturer: Linux 5.4.0-31-generic ohci_hcd
[ 1.002747] usb usb5: SerialNumber: 0000:00:14.5
[ 1.003286] hub 5-0:1.0: USB hub found
[ 1.004797] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.004801] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.004804] usb usb6: Product: xHCI Host Controller
[ 1.004806] usb usb6: Manufacturer: Linux 5.4.0-31-generic xhci-hcd
[ 1.004809] usb usb6: SerialNumber: 0000:00:10.0
[ 1.005185] hub 6-0:1.0: USB hub found
[ 1.007721] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.007773] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 1.007776] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.007778] usb usb7: Product: xHCI Host Controller
[ 1.007781] usb usb7: Manufacturer: Linux 5.4.0-31-generic xhci-hcd
[ 1.007783] usb usb7: SerialNumber: 0000:00:10.0
[ 1.008094] hub 7-0:1.0: USB hub found
[ 1.115315] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.115318] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.115321] usb usb8: Product: xHCI Host Controller
[ 1.115324] usb usb8: Manufacturer: Linux 5.4.0-31-generic xhci-hcd
[ 1.115326] usb usb8: SerialNumber: 0000:00:10.1
[ 1.115694] hub 8-0:1.0: USB hub found
[ 1.118300] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.118356] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 1.118359] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.118362] usb usb9: Product: xHCI Host Controller
[ 1.118364] usb usb9: Manufacturer: Linux 5.4.0-31-generic xhci-hcd
[ 1.118367] usb usb9: SerialNumber: 0000:00:10.1
[ 1.118615] hub 9-0:1.0: USB hub found
[ 1.119007] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.119015] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10
[ 1.119040] xhci_hcd 0000:02:00.0: Zeroing 64bit base registers, expecting fault
[ 1.140426] xhci_hcd 0000:02:00.0: hcc params 0x014051c7 hci version 0x100 quirks 0x0000000100000090
[ 1.140895] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.140899] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.140902] usb usb10: Product: xHCI Host Controller
[ 1.140904] usb usb10: Manufacturer: Linux 5.4.0-31-generic xhci-hcd
[ 1.140907] usb usb10: SerialNumber: 0000:02:00.0
[ 1.141131] hub 10-0:1.0: USB hub found
[ 1.141361] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.141367] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 11
[ 1.141372] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
[ 1.143890] usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.143941] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 1.143945] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.143947] usb usb11: Product: xHCI Host Controller
[ 1.143950] usb usb11: Manufacturer: Linux 5.4.0-31-generic xhci-hcd
[ 1.143952] usb usb11: SerialNumber: 0000:02:00.0
[ 1.144245] hub 11-0:1.0: USB hub found
[ 1.144724] usb 2-3: new high-speed USB device number 2 using ehci-pci
[ 1.166168] RAS: Correctable Errors collector initialized.
[ 1.174848] usb 2-3: New USB device found, idVendor=1307, idProduct=0165, bcdDevice= 1.00
[ 1.174851] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.174853] usb 2-3: Product: TS32GSSD34E-M
[ 1.174854] usb 2-3: Manufacturer: USB Mass Storage Device
[ 1.174855] usb 2-3: SerialNumber: 00000000000007
[ 1.196092] ima: No TPM chip found, activating TPM-bypass!
[ 1.196117] ima: No architecture policies found
[ 1.225918] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.291968] usb 2-5: new high-speed USB device number 3 using ehci-pci
[ 1.314444] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl, 74:d4:35:b0:0e:a7, XID 2c9, IRQ 44
[ 1.314445] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.321329] usb 2-5: New USB device found, idVendor=13b1, idProduct=003f, bcdDevice= 0.00
[ 1.321331] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.321332] usb 2-5: Product: WUSB6300
[ 1.321333] usb 2-5: Manufacturer: Linksys
[ 1.321334] usb 2-5: SerialNumber: 34
[ 1.335965] usb 6-1: new high-speed USB device number 2 using xhci_hcd
[ 1.338128] r8169 0000:01:00.0 enp1s0: renamed from eth0
[ 1.344574] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 1.344750] scsi host8: usb-storage 2-3:1.0
[ 1.344851] usbcore: registered new interface driver usb-storage
[ 1.346027] usbcore: registered new interface driver uas
[ 1.376252] usb 6-1: New USB device found, idVendor=13b1, idProduct=003b, bcdDevice= 1.01
[ 1.376255] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.376256] usb 6-1: Product: Linksys AE3000
[ 1.376257] usb 6-1: Manufacturer: Linksys
[ 1.376258] usb 6-1: SerialNumber: 1.00
[ 1.444253] usb 9-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.471827] usb 9-1: New USB device found, idVendor=174c, idProduct=5106, bcdDevice= 0.01
[ 1.471830] usb 9-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.471831] usb 9-1: Product: AS2105
[ 1.471832] usb 9-1: Manufacturer: ASMedia
[ 1.471833] usb 9-1: SerialNumber: WD-WXK1AC0W9117
[ 1.474286] usb-storage 9-1:1.0: USB Mass Storage device detected
[ 1.474485] scsi host9: usb-storage 9-1:1.0
[ 1.500160] usb 3-1: new full-speed USB device number 2 using ohci-pci
[ 1.724229] clocksource: Switched to clocksource tsc
[ 1.744787] usb 3-1: New USB device found, idVendor=06bd, idProduct=208f, bcdDevice= 1.10
[ 1.744790] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.744791] usb 3-1: Product: SNAPSCAN e50
[ 1.744792] usb 3-1: Manufacturer: AGFA
[ 2.024025] usb 1-3: new high-speed USB device number 3 using ehci-pci
[ 2.064186] usb 1-3: New USB device found, idVendor=0603, idProduct=8122, bcdDevice= 1.00
[ 2.064189] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.064191] usb 1-3: Product: USB Camera
[ 2.064192] usb 1-3: Manufacturer: Novatek
[ 2.236587] usb 11-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 2.262799] usb 11-1: New USB device found, idVendor=0bc2, idProduct=a313, bcdDevice= 1.00
[ 2.262802] usb 11-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2.262803] usb 11-1: Product: Wireless
[ 2.262804] usb 11-1: Manufacturer: Seagate
[ 2.262805] usb 11-1: SerialNumber: NA325WHD
[ 2.267001] usb-storage 11-1:1.0: USB Mass Storage device detected
[ 2.267260] scsi host10: usb-storage 11-1:1.0
[ 2.396049] usb 3-4: new low-speed USB device number 3 using ohci-pci
[ 2.495259] sd 9:0:0:0: [sdf] No Caching mode page found
[ 2.593739] usb 3-4: New USB device found, idVendor=045e, idProduct=00a4, bcdDevice= 0.01
[ 2.593744] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.593747] usb 3-4: Product: Microsoft(R) Compact Optical Mouse
[ 2.593774] usb 3-4: Manufacturer: Microsoft
[ 2.608101] usbcore: registered new interface driver usbhid
[ 2.608103] usbhid: USB HID core driver
[ 2.610484] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-4/3-4:1.0/0003:045E:00A4.0001/input/input4
[ 2.610630] hid-generic 0003:045E:00A4.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:12.0-4/input0
[ 3.238241] Console: switching to colour frame buffer device 240x67
[ 3.293221] scsi 10:0:0:0: Direct-Access Seagate Wireless 1D05 PQ: 0 ANSI: 6
[ 6.229671] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 6.835050] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 6.897315] lp: driver loaded but no devices found
[ 9.662131] audit: type=1400 audit(1590511505.959:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=440 comm="apparmor_parser"
[ 12.860664] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 12.862760] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 12.916101] fb0: switching to radeondrmfb from VESA VGA
[ 12.916208] Console: switching to colour dummy device 80x25
[ 13.214792] RTL871X: module init start
[ 13.214794] RTL871X: rtl8812au v4.3.8_12175.20140902
[ 13.214794] RTL871X: build time: May 25 2020 18:20:43
[ 13.214934] WARNING: CPU: 3 PID: 436 at net/wireless/core.c:867 wiphy_register+0x6d1/0x930 [cfg80211]
[ 13.214935] Modules linked in: 8812au(OE+) videobuf2_vmalloc videobuf2_memops snd_intel_dspcfg videobuf2_v4l2 crct10dif_pclmul ghash_clmulni_intel aesni_intel mac80211 videobuf2_common radeon(+) videodev cfg80211 snd_usb_audio(+) snd_hda_codec snd_hda_core crypto_simd cryptd glue_helper input_leds serio_raw snd_usbmidi_lib snd_hwdep k10temp fam15h_power snd_seq_midi libarc4 snd_seq_midi_event snd_rawmidi snd_pcm mc snd_seq ttm snd_seq_device snd_timer snd drm_kms_helper soundcore mac_hid i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt sch_fq_codel parport_pc ppdev lp drm parport ip_tables x_tables autofs4 hid_generic usbhid hid uas usb_storage crc32_pclmul ahci i2c_piix4 libahci r8169 realtek video
[ 13.214969] RIP: 0010:wiphy_register+0x6d1/0x930 [cfg80211]
[ 13.214972] RAX: ffffffffc0c8c690 RBX: ffff9042f08bd300 RCX: ffffffffc0c8c680
[ 13.215111] rtw_usb_if1_init+0xf0/0x20c [8812au]
[ 13.215137] usb_probe_interface+0xed/0x290
[ 13.215152] usb_register_driver+0x89/0x130
[ 13.215194] RAX: ffffffffffffffda RBX: 00005596e95c7a90 RCX: 00007f01408eb70d
[ 13.343970] usb 2-5: reset high-speed USB device number 3 using ehci-pci
[ 13.376667] usbcore: registered new interface driver rtl8812au
[ 13.376669] RTL871X: module init ret=0
[ 13.491491] [drm] Found UVD firmware Version: 1.64 Family ID: 9
[ 13.508333] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 13.830544] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
[ 13.832901] usb 6-1: reset high-speed USB device number 2 using xhci_hcd
[ 13.855035] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card2/input6
[ 13.855111] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card2/input7
[ 13.855199] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card2/input8
[ 13.855270] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card2/input9
[ 13.864247] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3593, rev 0402 detected
[ 13.956123] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000d detected
[ 13.956907] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 13.957524] usbcore: registered new interface driver rt2800usb
[ 14.255480] rt2800usb 6-1:1.0 wlxc8d7190aa971: renamed from wlan0
[ 15.564513] Console: switching to colour frame buffer device 240x67
[ 15.600105] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.ALIB], AE_NOT_FOUND (20190816/psargs-330)
[ 15.600121] No Local Variables are initialized for Method [ATC0]
[ 15.600123] No Arguments are initialized for method [ATC0]
[ 15.600126] ACPI Error: Aborting method \_SB.PCI0.VGA.ATC0 due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 15.600139] ACPI Error: Aborting method \_SB.PCI0.VGA.ATCS due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 18.048613] usb 1-3: 3:1: cannot get freq at ep 0x82
[ 18.073952] usbcore: registered new interface driver snd-usb-audio
[ 18.074649] uvcvideo: Found UVC 1.00 device USB Camera (0603:8122)
[ 18.097651] input: USB Camera: USB Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input10
[ 18.097783] usbcore: registered new interface driver uvcvideo
[ 24.049424] RTL8211E Gigabit Ethernet r8169-100:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[ 24.277107] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 24.310961] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 35.270528] wlxc8d7190aa971: authenticate with 60:e3:27:3b:eb:04
[ 35.499440] wlxc8d7190aa971: send auth to 60:e3:27:3b:eb:04 (try 1/3)
[ 35.499915] wlxc8d7190aa971: authenticated
[ 35.503999] wlxc8d7190aa971: associate with 60:e3:27:3b:eb:04 (try 1/3)
[ 35.504779] wlxc8d7190aa971: RX AssocResp from 60:e3:27:3b:eb:04 (capab=0x1011 status=0 aid=2)
[ 35.540013] wlxc8d7190aa971: associated
[ 35.697842] IPv6: ADDRCONF(NETDEV_CHANGE): wlxc8d7190aa971: link becomes ready
[ 36.228477] usb 1-3: 3:1: cannot get freq at ep 0x82
[ 41.600584] usb 1-3: 3:1: cannot get freq at ep 0x82
 Release Date: 04/09/2015
  Serial services are supported (int 14h)
 Manufacturer: Gigabyte Technology Co., Ltd.
 Product Name: To be filled by O.E.M.
 Serial Number: To be filled by O.E.M.
 Manufacturer: Gigabyte Technology Co., Ltd.
 Product Name: F2A88XM-D3H
 Serial Number: To be filled by O.E.M.
 Manufacturer: Gigabyte Technology Co., Ltd.
 Serial Number: To Be Filled By O.E.M.
 Port Type: Serial Port 16550A Compatible
 Manufacturer: Dimm0_Manufacturer
 Serial Number: Dimm0_SerNum
 Manufacturer: Undefined
 Serial Number: 00000000
 Manufacturer: Dimm2_Manufacturer
 Serial Number: Dimm2_SerNum
 Manufacturer: Undefined
 Serial Number: 00000000
 Manufacturer: AuthenticAMD
 Serial Number: Not Specified
enp1s0 no wireless extensions.

lo no wireless extensions.

wlxc8d7190aa971 IEEE 802.11 ESSID:"TP-LINK_EB04_5G"
          Mode:Managed Frequency:5.2 GHz Access Point: 60:E3:27:3B:EB:04
          Bit Rate=216 Mb/s Tx-Power=20 dBm
          Retry short long limit:2 RTS thr:off Fragment thr:off
          Power Management:on
          Link Quality=70/70 Signal level=-37 dBm
          Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
          Tx excessive retries:63 Invalid misc:74 Missed beacon:0

/etc/modprobe.d/alsa-base.conf:install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
/etc/modprobe.d/blacklist-ath_pci.conf:# which ath5k cannot recover. To prevent this condition, stop
/etc/modprobe.d/blacklist-ath_pci.conf:blacklist ath_pci
/etc/modprobe.d/blacklist.conf:blacklist eth1394
/etc/modprobe.d/blacklist.conf:# replaced by p54pci
/etc/modprobe.d/blacklist.conf:blacklist prism54
/etc/modprobe.d/blacklist.conf:# replaced by b43 and ssb.
/etc/modprobe.d/blacklist.conf:blacklist bcm43xx
/etc/modprobe.d/blacklist-oss.conf:blacklist uart6850
/etc/modprobe.d/iwlwifi.conf:# /etc/modprobe.d/iwlwifi.conf
/etc/modprobe.d/iwlwifi.conf:# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the
/etc/modprobe.d/iwlwifi.conf:# microcode file installed on the system. When removing iwlwifi, first
/etc/modprobe.d/iwlwifi.conf:# remove the iwl?vm module and then iwlwifi.
/etc/modprobe.d/iwlwifi.conf:remove iwlwifi \
/etc/modprobe.d/iwlwifi.conf:(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
/etc/modprobe.d/iwlwifi.conf:&& /sbin/modprobe -r mac80211
cat: /var/lib/NetworkManager/NetworkManager.state: Permission denied
18: PCI 100.0: 0200 Ethernet controller
  [Created at pci.386]
  Unique ID: lkKU.5rbhBgx50x4
  Parent ID: w+J7.YYC8aCLnN82
  SysFS ID: /devices/pci0000:00/0000:00:03.1/0000:01:00.0
  SysFS BusID: 0000:01:00.0
  Hardware Class: network
  Model: "Gigabyte Onboard Ethernet"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
  SubVendor: pci 0x1458 "Gigabyte Technology Co., Ltd"
  SubDevice: pci 0xe000 "Onboard Ethernet"
  Revision: 0x06
  Driver: "r8169"
  Driver Modules: "r8169"
  Device File: enp1s0
  I/O Ports: 0xe000-0xefff (rw)
  Memory Range: 0xfea00000-0xfea00fff (rw,non-prefetchable)
  Memory Range: 0xd0800000-0xd0803fff (ro,non-prefetchable)
  IRQ: 43 (no events)
  HW Address: 74:d4:35:b0:0e:a7
  Permanent HW Address: 74:d4:35:b0:0e:a7
  Link detected: no
  Module Alias: "pci:v000010ECd00008168sv00001458sd0000E000bc02sc00i00"
  Driver Info #0:
    Driver Status: r8169 is active
    Driver Activation Cmd: "modprobe r8169"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #7 (PCI bridge)

42: USB 00.0: 0282 WLAN controller
  [Created at usb.122]
  Unique ID: ZmS7.m50yNSedJDC
  Parent ID: 7eqy._63LoM0erv2
  SysFS ID: /devices/pci0000:00/0000:00:10.0/usb6/6-1/6-1:1.0
  SysFS BusID: 6-1:1.0
  Hardware Class: network
  Model: "Linksys AE3000 802.11abgn (3x3) Wireless Adapter [Ralink RT3573]"
  Hotplug: USB
  Vendor: usb 0x13b1 "Linksys"
  Device: usb 0x003b "AE3000 802.11abgn (3x3) Wireless Adapter [Ralink RT3573]"
  Revision: "1.01"
  Serial ID: "1.00"
  Driver: "rt2800usb"
  Driver Modules: "rt2800usb"
  Device File: wlxc8d7190aa971
  Features: WLAN
  Speed: 480 Mbps
  HW Address: c8:d7:19:0a:a9:71
  Permanent HW Address: c8:d7:19:0a:a9:71
  Link detected: yes
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 36 38 40 44 46 48 52 54 56 60 62 64 100 102 104 108 110 112
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484 5.18 5.19 5.2 5.22 5.23 5.24 5.26 5.27 5.28 5.3 5.31 5.32 5.5 5.51 5.52 5.54 5.55 5.56
  WLAN encryption modes: WEP40 WEP104 TKIP CCMP
  WLAN authentication modes: open sharedkey wpa-psk wpa-eap
  Module Alias: "usb:v13B1p003Bd0101dc00dsc00dp00icFFiscFFipFFin00"
  Driver Info #0:
    Driver Status: rt2800usb is active
    Driver Activation Cmd: "modprobe rt2800usb"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #37 (Hub)
root 974 0.0 0.2 418472 20176 ? Ssl 12:45 0:00 /usr/sbin/NetworkManager --no-daemon
root 982 0.0 0.2 47888 20332 ? Ss 12:45 0:00 /usr/bin/python3 /usr/bin/networkd-dispatcher --run-startup-triggers
root 997 0.0 0.1 13936 9172 ? Ss 12:45 0:00 /sbin/wpa_supplicant -u -s -O /run/wpa_supplicant
peter 3988 0.0 0.0 17664 2672 pts/0 S+ 13:00 0:00 grep --color=auto -E wpa|icd|etwork

Command 'netstat' not found, but can be installed with:

sudo apt install net-tools

# This file is managed by man:systemd-resolved(8). Do not edit.
#
# This is a dynamic resolv.conf file for connecting local clients to the
# internal DNS stub resolver of systemd-resolved. This file lists all
# configured search domains.
#
# Run "resolvectl status" to see details about the uplink DNS servers
# currently in use.
#
# Third party programs must not access this file directly, but only through the
# symlink at /etc/resolv.conf. To manage man:resolv.conf(5) in a different way,
# replace this symlink by a static file or a different symlink.
#
# See man:systemd-resolved.service(8) for details about the supported modes of
# operation for /etc/resolv.conf.

nameserver 127.0.0.53
options edns0
total 129668
1572865 drwxr-xr-x 3 root root 4096 May 25 17:41 .
      2 drwxr-xr-x 20 root root 4096 May 24 21:33 ..
1572868 -rw-r--r-- 1 root root 237718 Apr 20 12:33 config-5.4.0-26-generic
1573098 -rw-r--r-- 1 root root 237718 May 7 05:05 config-5.4.0-31-generic
1572866 drwxr-xr-x 4 root root 4096 May 24 21:45 grub
1572869 lrwxrwxrwx 1 root root 27 May 24 21:45 initrd.img -> initrd.img-5.4.0-31-generic
1572914 -rw-r--r-- 1 root root 49453264 May 24 21:42 initrd.img-5.4.0-26-generic
1572915 -rw-r--r-- 1 root root 49463003 May 25 17:41 initrd.img-5.4.0-31-generic
1572870 lrwxrwxrwx 1 root root 27 May 24 21:30 initrd.img.old -> initrd.img-5.4.0-26-generic
1572871 -rw-r--r-- 1 root root 182704 Feb 13 18:09 memtest86+.bin
1572872 -rw-r--r-- 1 root root 184380 Feb 13 18:09 memtest86+.elf
1572873 -rw-r--r-- 1 root root 184884 Feb 13 18:09 memtest86+_multiboot.bin
1572867 -rw------- 1 root root 4736015 Apr 20 12:33 System.map-5.4.0-26-generic
1573097 -rw------- 1 root root 4736769 May 7 05:05 System.map-5.4.0-31-generic
1578101 lrwxrwxrwx 1 root root 24 May 24 21:45 vmlinuz -> vmlinuz-5.4.0-31-generic
1576747 -rw-r--r-- 1 root root 11657976 Apr 23 03:48 vmlinuz-5.4.0-26-generic
1573099 -rw------- 1 root root 11662080 May 7 06:00 vmlinuz-5.4.0-31-generic
1578100 lrwxrwxrwx 1 root root 24 May 24 21:45 vmlinuz.old -> vmlinuz-5.4.0-26-generic
ubuntu-support-status: command not found
--2020-05-26 13:00:32-- https://pci-ids.ucw.cz/v2.2/pci.ids.bz2
Resolving pci-ids.ucw.cz (pci-ids.ucw.cz)... 46.255.230.98, 2a00:da80:fff0:2::2
Connecting to pci-ids.ucw.cz (pci-ids.ucw.cz)|46.255.230.98|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 265280 (259K) [application/x-bzip2]
Saving to: ‘/usr/share/misc/pci.ids.new’

/usr/share/misc/pci 100%[===================>] 259.06K 57.1KB/s in 4.5s

2020-05-26 13:00:45 (57.1 KB/s) - ‘/usr/share/misc/pci.ids.new’ saved [265280/265280]

ln: failed to create hard link '/usr/share/misc/pci.ids.old': File exists
sudo: update-usbids: command not found
Module Size Used by
joydev 24576 0
nls_iso8859_1 16384 3
ccm 20480 6
amdgpu 4575232 0
amd_iommu_v2 20480 1 amdgpu
gpu_sched 32768 1 amdgpu
edac_mce_amd 32768 0
snd_hda_codec_realtek 118784 1
snd_hda_codec_hdmi 61440 1
kvm_amd 98304 0
snd_hda_codec_generic 81920 1 snd_hda_codec_realtek
ccp 86016 1 kvm_amd
ledtrig_audio 16384 2 snd_hda_codec_generic,snd_hda_codec_realtek
rt2800usb 32768 0
rt2x00usb 24576 1 rt2800usb
snd_hda_intel 53248 4
rt2800lib 131072 1 rt2800usb
kvm 663552 1 kvm_amd
rt2x00lib 61440 3 rt2800usb,rt2x00usb,rt2800lib
uvcvideo 98304 0
8812au 1290240 0
videobuf2_vmalloc 20480 1 uvcvideo
videobuf2_memops 20480 1 videobuf2_vmalloc
snd_intel_dspcfg 24576 1 snd_hda_intel
videobuf2_v4l2 24576 1 uvcvideo
crct10dif_pclmul 16384 1
ghash_clmulni_intel 16384 0
aesni_intel 372736 4
mac80211 843776 3 rt2x00lib,rt2x00usb,rt2800lib
videobuf2_common 49152 2 videobuf2_v4l2,uvcvideo
radeon 1474560 15
videodev 225280 3 videobuf2_v4l2,uvcvideo,videobuf2_common
cfg80211 704512 3 rt2x00lib,8812au,mac80211
snd_usb_audio 258048 1
snd_hda_codec 131072 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
snd_hda_core 90112 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
crypto_simd 16384 1 aesni_intel
cryptd 24576 2 crypto_simd,ghash_clmulni_intel
glue_helper 16384 1 aesni_intel
input_leds 16384 0
serio_raw 20480 0
snd_usbmidi_lib 36864 1 snd_usb_audio
snd_hwdep 20480 2 snd_usb_audio,snd_hda_codec
k10temp 16384 0
fam15h_power 16384 0
snd_seq_midi 20480 0
libarc4 16384 1 mac80211
snd_seq_midi_event 16384 1 snd_seq_midi
snd_rawmidi 36864 2 snd_seq_midi,snd_usbmidi_lib
snd_pcm 106496 5 snd_hda_codec_hdmi,snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_hda_core
mc 53248 5 videodev,snd_usb_audio,videobuf2_v4l2,uvcvideo,videobuf2_common
snd_seq 69632 2 snd_seq_midi,snd_seq_midi_event
ttm 106496 2 amdgpu,radeon
snd_seq_device 16384 3 snd_seq,snd_seq_midi,snd_rawmidi
snd_timer 36864 2 snd_seq,snd_pcm
snd 90112 23 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_usb_audio,snd_usbmidi_lib,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm,snd_rawmidi
drm_kms_helper 184320 2 amdgpu,radeon
soundcore 16384 1 snd
mac_hid 16384 0
i2c_algo_bit 16384 2 amdgpu,radeon
fb_sys_fops 16384 1 drm_kms_helper
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
sch_fq_codel 20480 6
parport_pc 40960 0
ppdev 24576 0
lp 20480 0
drm 491520 11 gpu_sched,drm_kms_helper,amdgpu,radeon,ttm
parport 53248 3 parport_pc,lp,ppdev
ip_tables 32768 0
x_tables 40960 1 ip_tables
autofs4 45056 2
hid_generic 16384 0
usbhid 57344 0
hid 131072 2 usbhid,hid_generic
uas 28672 0
usb_storage 77824 5 uas
crc32_pclmul 16384 0
ahci 40960 5
i2c_piix4 28672 0
libahci 32768 1 ahci
r8169 90112 0
realtek 24576 1
video 49152 0
peter@peter-ubuntu-20:~$

Personal NOTES re above:
- both Linsys are currently connected to usb ports - one used to connect to internet/send this mssage; WS6300 is recognized apparently/not working/unsuccessful install pls see Launchpad posted question #690967
- both wifi usb devices are recognized in above OUTPUT.
- lsmod lists 8812au
- when ONLY WS6300 IS USB CONNECTED there is no internet access.
- on previous LTS releases BOTH devices abobe worked in tandem/greater and faster throughput