WiFi unstable
Hit:1 http://
Hit:2 http://
Ign:3 http://
Get:4 http://
Hit:5 http://
Get:6 http://
Get:7 http://
Get:9 http://
Hit:10 https:/
Get:11 http://
Get:12 http://
Get:13 http://
Get:14 http://
Get:15 http://
Get:16 http://
Get:17 http://
Get:18 http://
Fetched 3.866 kB in 3s (1.186 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version (3.4-1).
pciutils is already the newest version (1:3.6.4-1).
rfkill is already the newest version (2.34-0.1ubuntu9).
usbutils is already the newest version (1:012-2).
hwinfo is already the newest version (21.68-1).
0 upgraded, 0 newly installed, 0 to remove and 23 not upgraded.
*-network
description: Wireless interface
product: AR9485 Wireless Network Adapter
vendor: Qualcomm Atheros
physical id: 0
bus info: pci@0000:04:00.0
logical name: wlp4s0
version: 01
serial: 54:27:1e:27:4d:c3
width: 64 bits
clock: 33MHz
resources: irq:18 memory:
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:05:00.0
logical name: enp5s0
version: 0c
serial: 40:16:7e:11:aa:33
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
resources: irq:19 ioport:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
enp5s0 Interface doesn't support scanning.
lo Interface doesn't support scanning.
cat: /etc/network/
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
04:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Subsystem: AzureWave AR9485 Wireless Network Adapter [1a3b:2126]
Kernel driver in use: ath9k
Kernel modules: ath9k
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1043:200f]
Kernel driver in use: r8169
Kernel modules: r8169
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 007: ID 0bda:0139 Realtek Semiconductor Corp. RTS5139 Card Reader Controller
Bus 003 Device 005: ID 04f2:b3fd Chicony Electronics Co., Ltd HD WebCam (Asus N-series)
Bus 003 Device 010: ID 13d3:3402 IMC Networks Bluetooth USB Host Controller
Bus 003 Device 034: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 003 Device 009: ID 046d:c062 Logitech, Inc. M-UAS144 [LS1 Laser Mouse]
Bus 003 Device 008: ID 413c:2112 Dell Computer Corp.
Bus 003 Device 004: ID 0b95:6802 ASIX Electronics Corp. USB2.0 Hub
Bus 003 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
STATE CONNECTIVITY WIFI-HW WIFI WWAN-HW WWAN
connected full enabled enabled enabled enabled
H/W path Device Class Description
=======
/0 bus N550JK
/0/0 memory 64KiB BIOS
/0/8 processor Intel(R) Core(TM) i7-4700HQ CPU @ 2
/0/8/9 memory 1MiB L2 cache
/0/8/a memory 256KiB L1 cache
/0/8/b memory 6MiB L3 cache
/0/c memory 16GiB System Memory
/0/c/0 memory 8GiB SODIMM DDR3 Synchronous 1600 M
/0/c/1 memory DIMM [empty]
/0/c/2 memory 8GiB SODIMM DDR3 Synchronous 1600 M
/0/c/3 memory DIMM [empty]
/0/100 bridge Xeon E3-1200 v3/4th Gen Core Proces
/0/100/1 bridge Xeon E3-1200 v3/4th Gen Core Proces
/0/100/1/0 display GM107M [GeForce GTX 850M]
/0/100/2 display 4th Gen Core Processor Integrated G
/0/100/3 multimedia Xeon E3-1200 v3/4th Gen Core Proces
/0/100/14 bus 8 Series/C220 Series Chipset Family
/0/100/14/0 usb3 bus xHCI Host Controller
/0/100/14/0/2 bus USB2.0 Hub
/0/100/14/0/2/2 bus AX68002
/0/100/14/0/2/2/1 input Dell USB Wired Multimedia Keyboard
/0/100/14/0/2/2/2 input USB Laser Mouse
/0/100/14/0/2/3 bus USB2.0 Hub
/0/100/14/0/5 communication Bluetooth USB Host Controller
/0/100/14/0/7 multimedia USB2.0 HD UVC WebCam
/0/100/14/0/8 generic USB2.0-CRW
/0/100/14/1 usb4 bus xHCI Host Controller
/0/100/16 communication 8 Series/C220 Series Chipset Family
/0/100/1a bus 8 Series/C220 Series Chipset Family
/0/100/1a/1 usb1 bus EHCI Host Controller
/0/100/1a/1/1 bus USB hub
/0/100/1b multimedia 8 Series/C220 Series Chipset High D
/0/100/1c bridge 8 Series/C220 Series Chipset Family
/0/100/1c.1 bridge 8 Series/C220 Series Chipset Family
/0/100/1c.2 bridge 8 Series/C220 Series Chipset Family
/0/100/1c.2/0 wlp4s0 network AR9485 Wireless Network Adapter
/0/100/1c.3 bridge 8 Series/C220 Series Chipset Family
/0/100/1c.3/0 enp5s0 network RTL8111/8168/8411 PCI Express Gigab
/0/100/1d bus 8 Series/C220 Series Chipset Family
/0/100/1d/1 usb2 bus EHCI Host Controller
/0/100/1d/1/1 bus USB hub
/0/100/1f bridge HM86 Express LPC Controller
/0/100/1f.2 scsi2 storage 8 Series/C220 Series Chipset Family
/0/100/1f.2/0 /dev/sda disk 500GB Samsung SSD 840
/0/100/1f.2/0/1 volume 511MiB Windows FAT volume
/0/100/1f.2/0/2 /dev/sda2 volume 465GiB EXT4 volume
/0/100/1f.2/1 /dev/sdb disk 750GB HGST HTS721075A9
/0/100/1f.2/1/1 /dev/sdb1 volume 99MiB Windows FAT volume
/0/100/1f.2/1/2 /dev/sdb2 volume 899MiB Windows NTFS volume
/0/100/1f.2/1/3 /dev/sdb3 volume 127MiB reserved partition
/0/100/1f.2/1/4 /dev/sdb4 volume 279GiB Windows NTFS volume
/0/100/1f.2/1/5 /dev/sdb5 volume 398GiB Windows NTFS volume
/0/100/1f.2/1/6 /dev/sdb6 volume 20GiB Windows NTFS volume
/0/100/1f.3 bus 8 Series/C220 Series Chipset Family
/0/1 system PnP device PNP0c01
/0/2 system PnP device PNP0c02
/0/3 system PnP device PNP0b00
/0/4 generic PnP device INT3f0d
/0/5 system PnP device PNP0c02
/0/6 system PnP device PNP0c02
/0/7 generic PnP device ETD0105
/0/9 generic PnP device ATK3001
/0/a system PnP device PNP0c02
/0/b system PnP device PNP0c02
Linux zagazoo 5.4.0-29-generic #33-Ubuntu SMP Wed Apr 29 14:32:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
/usr/bin/find: '/run/user/
/usr/bin/find: '/run/user/
/usr/bin/find: '/run/user/
[ 0.007709] No NUMA configuration found
[ 0.103665] APIC: Switch to symmetric I/O mode setup
[ 0.104079] Switched APIC routing to cluster x2apic.
[ 0.125562] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.125562] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.136887] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.159694] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.189328] usbcore: registered new interface driver usbfs
[ 0.189328] usbcore: registered new interface driver hub
[ 0.189328] usbcore: registered new device driver usb
[ 0.193823] clocksource: Switched to clocksource tsc-early
[ 0.202696] pnp: PnP ACPI: found 10 devices
[ 0.338650] input: Lid Switch as /devices/
[ 0.338662] ACPI: Lid Switch [LID]
[ 0.363797] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.363799] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.363800] usb usb1: Product: EHCI Host Controller
[ 0.363801] usb usb1: Manufacturer: Linux 5.4.0-29-generic ehci_hcd
[ 0.363802] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.364019] hub 1-0:1.0: USB hub found
[ 0.384638] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.384639] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.384640] usb usb2: Product: EHCI Host Controller
[ 0.384641] usb usb2: Manufacturer: Linux 5.4.0-29-generic ehci_hcd
[ 0.384642] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.386377] hub 2-0:1.0: USB hub found
[ 0.389549] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.389550] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.389551] usb usb3: Product: xHCI Host Controller
[ 0.389552] usb usb3: Manufacturer: Linux 5.4.0-29-generic xhci-hcd
[ 0.389552] usb usb3: SerialNumber: 0000:00:14.0
[ 0.389642] hub 3-0:1.0: USB hub found
[ 0.392939] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 0.392940] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.392940] usb usb4: Product: xHCI Host Controller
[ 0.392941] usb usb4: Manufacturer: Linux 5.4.0-29-generic xhci-hcd
[ 0.392942] usb usb4: SerialNumber: 0000:00:14.0
[ 0.393029] hub 4-0:1.0: USB hub found
[ 0.412678] RAS: Correctable Errors collector initialized.
[ 0.427865] ima: No TPM chip found, activating TPM-bypass!
[ 0.427875] ima: No architecture policies found
[ 0.508037] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.515074] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.599203] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 0.614408] r8169 0000:05:00.0 eth0: RTL8168g/8111g, 40:16:7e:11:aa:33, XID 4c0, IRQ 33
[ 0.614410] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.645131] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 0.703739] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.723735] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.727739] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 0.736222] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[ 0.736224] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.736634] hub 1-1:1.0: USB hub found
[ 0.749392] usb 3-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[ 0.749395] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 0.749396] usb 3-2: Product: USB2.0 Hub
[ 0.751124] hub 3-2:1.0: USB hub found
[ 0.752181] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[ 0.752182] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.752442] hub 2-1:1.0: USB hub found
[ 0.879739] usb 3-5: new full-speed USB device number 3 using xhci_hcd
[ 1.029608] usb 3-5: New USB device found, idVendor=13d3, idProduct=3402, bcdDevice= 0.01
[ 1.029610] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.029611] usb 3-5: Product: Bluetooth USB Host Controller
[ 1.029612] usb 3-5: Manufacturer: Atheros Communications
[ 1.029613] usb 3-5: SerialNumber: Alaska Day 2006
[ 1.107737] usb 3-2.2: new full-speed USB device number 4 using xhci_hcd
[ 1.216420] usb 3-2.2: New USB device found, idVendor=0b95, idProduct=6802, bcdDevice= 0.12
[ 1.216422] usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.216424] usb 3-2.2: Product: AX68002
[ 1.216425] usb 3-2.2: Manufacturer: ASIX Electronics
[ 1.216426] usb 3-2.2: SerialNumber: 00000001
[ 1.219601] hub 3-2.2:1.0: USB hub found
[ 1.304599] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x381f05)
[ 1.343726] usb 3-7: new high-speed USB device number 5 using xhci_hcd
[ 1.351762] clocksource: Switched to clocksource tsc
[ 1.399371] usb 3-7: New USB device found, idVendor=04f2, idProduct=b3fd, bcdDevice=69.54
[ 1.399373] usb 3-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.399375] usb 3-7: Product: USB2.0 HD UVC WebCam
[ 1.399377] usb 3-7: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.399379] usb 3-7: SerialNumber: 0x0001
[ 1.443720] usb 3-2.3: new high-speed USB device number 6 using xhci_hcd
[ 1.465285] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[ 1.465287] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.465288] usb 3-2.3: Product: USB2.0 Hub
[ 1.466654] hub 3-2.3:1.0: USB hub found
[ 1.591735] usb 3-8: new high-speed USB device number 7 using xhci_hcd
[ 1.612320] usb 3-8: New USB device found, idVendor=0bda, idProduct=0139, bcdDevice=39.60
[ 1.612323] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.612324] usb 3-8: Product: USB2.0-CRW
[ 1.612325] usb 3-8: Manufacturer: Generic
[ 1.612326] usb 3-8: SerialNumber: 20100201396000000
[ 1.618293] usbcore: registered new interface driver rtsx_usb
[ 1.691720] usb 3-2.2.1: new full-speed USB device number 8 using xhci_hcd
[ 1.796935] usb 3-2.2.1: New USB device found, idVendor=413c, idProduct=2112, bcdDevice= 1.07
[ 1.796937] usb 3-2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.796939] usb 3-2.2.1: Product: Dell USB Wired Multimedia Keyboard
[ 1.796940] usb 3-2.2.1: Manufacturer: DELL
[ 1.883743] usb 3-2.2.2: new full-speed USB device number 9 using xhci_hcd
[ 1.999777] usb 3-2.2.2: New USB device found, idVendor=046d, idProduct=c062, bcdDevice=31.00
[ 1.999779] usb 3-2.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.999780] usb 3-2.2.2: Product: USB Laser Mouse
[ 1.999781] usb 3-2.2.2: Manufacturer: Logitech
[ 2.017272] usbcore: registered new interface driver usbhid
[ 2.017273] usbhid: USB HID core driver
[ 2.019920] input: DELL Dell USB Wired Multimedia Keyboard as /devices/
[ 2.079942] hid-generic 0003:413C:
[ 2.080089] input: DELL Dell USB Wired Multimedia Keyboard System Control as /devices/
[ 2.139902] input: DELL Dell USB Wired Multimedia Keyboard Consumer Control as /devices/
[ 2.140079] hid-generic 0003:413C:
[ 2.140216] input: Logitech USB Laser Mouse as /devices/
[ 2.140388] hid-generic 0003:046D:
[ 2.196627] Console: switching to colour frame buffer device 240x67
[ 2.852738] systemd[1]: /lib/systemd/
[ 2.970136] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 3.084054] lp: driver loaded but no devices found
[ 3.586299] input: Asus Wireless Radio Control as /devices/
[ 3.738983] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.739258] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.880914] fb0: switching to inteldrmfb from EFI VGA
[ 3.881004] Console: switching to colour dummy device 80x25
[ 3.909358] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 3.963858] usbcore: registered new interface driver btusb
[ 4.124311] Console: switching to colour frame buffer device 240x67
[ 4.130705] ath: phy0: Set parameters for CUS198
[ 4.130707] ath: phy0: Set BT/WLAN RX diversity capability
[ 4.136674] ath: phy0: Enable LNA combining
[ 4.137798] ath: phy0: ASPM enabled: 0x42
[ 4.137801] ath: EEPROM regdomain: 0x60
[ 4.137801] ath: EEPROM indicates we should expect a direct regpair map
[ 4.137803] ath: Country alpha2 being used: 00
[ 4.137804] ath: Regpair used: 0x60
[ 4.138666] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.139019] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffff9b424
[ 4.192225] usb 3-5: USB disconnect, device number 3
[ 4.192490] usbcore: registered new interface driver ath3k
[ 4.216597] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b3fd)
[ 4.220362] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/
[ 4.220448] usbcore: registered new interface driver uvcvideo
[ 4.248180] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
[ 4.435948] input: HDA Intel PCH Mic as /devices/
[ 4.435992] input: HDA Intel PCH Headphone as /devices/
[ 4.483545] intel_rapl_common: Found RAPL domain package
[ 4.483546] intel_rapl_common: Found RAPL domain core
[ 4.483547] intel_rapl_common: Found RAPL domain uncore
[ 4.483548] intel_rapl_common: Found RAPL domain dram
[ 4.503697] usb 3-5: new full-speed USB device number 10 using xhci_hcd
[ 4.563346] audit: type=1400 audit(158918878
[ 5.533414] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_
[ 5.542859] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/
[ 5.542918] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/
[ 5.542970] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/
[ 5.543018] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/
[ 9.697306] usb 3-5: New USB device found, idVendor=13d3, idProduct=3402, bcdDevice= 0.02
[ 9.697309] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9.697311] usb 3-5: Product: Bluetooth USB Host Controller
[ 9.697312] usb 3-5: Manufacturer: Atheros Communications
[ 9.697313] usb 3-5: SerialNumber: Alaska Day 2006
[ 10.606061] ACPI Warning: \_SB.PCI0.
[ 11.061339] wlp4s0: authenticate with 64:59:f8:94:86:b8
[ 11.075499] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[ 11.112836] wlp4s0: authenticated
[ 11.119680] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[ 11.128664] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=4)
[ 11.128781] wlp4s0: associated
[ 11.128870] ath: EEPROM regdomain: 0x817c
[ 11.128870] ath: EEPROM indicates we should expect a country code
[ 11.128871] ath: doing EEPROM country->regdmn map search
[ 11.128871] ath: country maps to regdmn code: 0x37
[ 11.128872] ath: Country alpha2 being used: IT
[ 11.128873] ath: Regpair used: 0x37
[ 11.128874] ath: regdomain 0x817c dynamically updated by country element
[ 11.168106] IPv6: ADDRCONF(
[ 48.728438] usb 3-2.3: USB disconnect, device number 6
[17634.647015] usb 3-2.3: new high-speed USB device number 11 using xhci_hcd
[17634.672273] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[17634.672275] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[17634.672276] usb 3-2.3: Product: USB2.0 Hub
[17634.673407] hub 3-2.3:1.0: USB hub found
[17799.529734] usb 3-2.3: USB disconnect, device number 11
[18036.297169] usb 3-2.3: new high-speed USB device number 12 using xhci_hcd
[18036.319022] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[18036.319025] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[18036.319027] usb 3-2.3: Product: USB2.0 Hub
[18036.320361] hub 3-2.3:1.0: USB hub found
[18056.041896] usb 3-2.3: USB disconnect, device number 12
[18126.810008] wlp4s0: authenticate with 64:59:f8:94:86:b8
[18126.830276] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[18126.840159] wlp4s0: authenticated
[18126.840749] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[18126.846336] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=4)
[18126.846454] wlp4s0: associated
[18126.846550] ath: EEPROM regdomain: 0x817c
[18126.846551] ath: EEPROM indicates we should expect a country code
[18126.846552] ath: doing EEPROM country->regdmn map search
[18126.846553] ath: country maps to regdmn code: 0x37
[18126.846554] ath: Country alpha2 being used: IT
[18126.846555] ath: Regpair used: 0x37
[18126.846556] ath: regdomain 0x817c dynamically updated by country element
[19435.336690] usb 3-2.3: new high-speed USB device number 13 using xhci_hcd
[19435.358680] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[19435.358685] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[19435.358688] usb 3-2.3: Product: USB2.0 Hub
[19435.360343] hub 3-2.3:1.0: USB hub found
[19910.849319] wlp4s0: authenticate with 64:59:f8:94:86:b8
[19910.869088] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[19910.971602] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 2/3)
[19911.003750] wlp4s0: authenticated
[19911.007607] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[19911.215617] wlp4s0: associate with 64:59:f8:94:86:b8 (try 2/3)
[19911.221492] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=4)
[19911.221625] wlp4s0: associated
[19911.221759] ath: EEPROM regdomain: 0x817c
[19911.221759] ath: EEPROM indicates we should expect a country code
[19911.221761] ath: doing EEPROM country->regdmn map search
[19911.221762] ath: country maps to regdmn code: 0x37
[19911.221763] ath: Country alpha2 being used: IT
[19911.221764] ath: Regpair used: 0x37
[19911.221765] ath: regdomain 0x817c dynamically updated by country element
[20092.267835] usb 3-2.3: USB disconnect, device number 13
[20345.674389] usb 3-2.3: new high-speed USB device number 14 using xhci_hcd
[20345.696125] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[20345.696128] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[20345.696129] usb 3-2.3: Product: USB2.0 Hub
[20345.697427] hub 3-2.3:1.0: USB hub found
[20508.524282] usb 3-2.3: USB disconnect, device number 14
[49197.780714] wlp4s0: authenticate with 64:59:f8:94:86:b8
[49197.800941] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[49197.900246] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 2/3)
[49197.991950] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 3/3)
[49198.027920] wlp4s0: authentication with 64:59:f8:94:86:b8 timed out
[77382.103604] wlp4s0: authenticate with 64:59:f8:94:86:b8
[77382.117856] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[77382.120021] wlp4s0: authenticated
[77382.120603] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[77382.126516] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=3)
[77382.126632] wlp4s0: associated
[77382.126729] ath: EEPROM regdomain: 0x817c
[77382.126730] ath: EEPROM indicates we should expect a country code
[77382.126730] ath: doing EEPROM country->regdmn map search
[77382.126731] ath: country maps to regdmn code: 0x37
[77382.126732] ath: Country alpha2 being used: IT
[77382.126733] ath: Regpair used: 0x37
[77382.126734] ath: regdomain 0x817c dynamically updated by country element
[77382.137922] IPv6: ADDRCONF(
[90846.570497] wlp4s0: authenticate with 64:59:f8:94:86:b8
[90846.590979] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[90846.639506] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 2/3)
[90846.687249] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 3/3)
[90846.711631] wlp4s0: authenticated
[90846.713407] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[90846.760639] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[90846.760763] wlp4s0: associated
[90846.760882] ath: EEPROM regdomain: 0x817c
[90846.760883] ath: EEPROM indicates we should expect a country code
[90846.760884] ath: doing EEPROM country->regdmn map search
[90846.760885] ath: country maps to regdmn code: 0x37
[90846.760886] ath: Country alpha2 being used: IT
[90846.760887] ath: Regpair used: 0x37
[90846.760888] ath: regdomain 0x817c dynamically updated by country element
[102673.568214] usb 3-2.3: new high-speed USB device number 15 using xhci_hcd
[102673.593461] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[102673.593463] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[102673.593465] usb 3-2.3: Product: USB2.0 Hub
[102673.594584] hub 3-2.3:1.0: USB hub found
[102999.020368] wlp4s0: authenticate with 64:59:f8:94:86:b8
[102999.034678] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[102999.041348] wlp4s0: authenticated
[102999.043410] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[102999.048229] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[102999.048348] wlp4s0: associated
[102999.048438] ath: EEPROM regdomain: 0x817c
[102999.048438] ath: EEPROM indicates we should expect a country code
[102999.048439] ath: doing EEPROM country->regdmn map search
[102999.048440] ath: country maps to regdmn code: 0x37
[102999.048440] ath: Country alpha2 being used: IT
[102999.048441] ath: Regpair used: 0x37
[102999.048442] ath: regdomain 0x817c dynamically updated by country element
[102999.061468] IPv6: ADDRCONF(
[103224.762841] usb 3-2.3: USB disconnect, device number 15
[103235.994712] usb 3-2.3: new high-speed USB device number 16 using xhci_hcd
[103236.016555] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[103236.016562] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[103236.016565] usb 3-2.3: Product: USB2.0 Hub
[103236.018239] hub 3-2.3:1.0: USB hub found
[103247.971295] wlp4s0: authenticate with 64:59:f8:94:86:b8
[103247.985720] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[103247.987671] wlp4s0: authenticated
[103247.994729] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[103248.011367] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[103248.011487] wlp4s0: associated
[103248.011643] ath: EEPROM regdomain: 0x817c
[103248.011644] ath: EEPROM indicates we should expect a country code
[103248.011645] ath: doing EEPROM country->regdmn map search
[103248.011646] ath: country maps to regdmn code: 0x37
[103248.011648] ath: Country alpha2 being used: IT
[103248.011649] ath: Regpair used: 0x37
[103248.011651] ath: regdomain 0x817c dynamically updated by country element
[103248.024489] IPv6: ADDRCONF(
[103278.531354] wlp4s0: authenticate with 64:59:f8:94:86:b8
[103278.552033] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[103278.657051] wlp4s0: authenticated
[103278.658576] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[103278.662343] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[103278.662480] wlp4s0: associated
[103278.662702] ath: EEPROM regdomain: 0x817c
[103278.662704] ath: EEPROM indicates we should expect a country code
[103278.662706] ath: doing EEPROM country->regdmn map search
[103278.662713] ath: country maps to regdmn code: 0x37
[103278.662715] ath: Country alpha2 being used: IT
[103278.662717] ath: Regpair used: 0x37
[103278.662719] ath: regdomain 0x817c dynamically updated by country element
[103491.535178] wlp4s0: authenticate with 64:59:f8:94:86:b8
[103491.555576] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[103491.658011] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 2/3)
[103492.066683] wlp4s0: authenticated
[103492.070016] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[103492.078091] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[103492.078217] wlp4s0: associated
[103492.078368] ath: EEPROM regdomain: 0x817c
[103492.078370] ath: EEPROM indicates we should expect a country code
[103492.078371] ath: doing EEPROM country->regdmn map search
[103492.078372] ath: country maps to regdmn code: 0x37
[103492.078374] ath: Country alpha2 being used: IT
[103492.078374] ath: Regpair used: 0x37
[103492.078376] ath: regdomain 0x817c dynamically updated by country element
[103518.907104] usb 3-2.3: USB disconnect, device number 16
[107002.524473] usb 3-2.3: new high-speed USB device number 17 using xhci_hcd
[107002.545731] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[107002.545732] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[107002.545733] usb 3-2.3: Product: USB2.0 Hub
[107002.546873] hub 3-2.3:1.0: USB hub found
[107161.545202] wlp4s0: authenticate with 64:59:f8:94:86:b8
[107161.565574] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[107161.848607] wlp4s0: authenticated
[107161.855917] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[107161.880584] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[107161.880709] wlp4s0: associated
[107161.880860] ath: EEPROM regdomain: 0x817c
[107161.880861] ath: EEPROM indicates we should expect a country code
[107161.880862] ath: doing EEPROM country->regdmn map search
[107161.880864] ath: country maps to regdmn code: 0x37
[107161.880865] ath: Country alpha2 being used: IT
[107161.880866] ath: Regpair used: 0x37
[107161.880868] ath: regdomain 0x817c dynamically updated by country element
[107190.206519] usb 3-2.3: USB disconnect, device number 17
[107217.051743] usb 3-2.3: new high-speed USB device number 18 using xhci_hcd
[107217.073575] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[107217.073580] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[107217.073583] usb 3-2.3: Product: USB2.0 Hub
[107217.075259] hub 3-2.3:1.0: USB hub found
[107219.902612] usb 3-2.3: USB disconnect, device number 18
[107226.779702] usb 3-2.3: new high-speed USB device number 19 using xhci_hcd
[107226.801290] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[107226.801295] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[107226.801297] usb 3-2.3: Product: USB2.0 Hub
[107226.802806] hub 3-2.3:1.0: USB hub found
[107297.470663] usb 3-2.3: USB disconnect, device number 19
[107341.979233] usb 3-2.3: new high-speed USB device number 20 using xhci_hcd
[107342.000846] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[107342.000849] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[107342.000850] usb 3-2.3: Product: USB2.0 Hub
[107342.002145] hub 3-2.3:1.0: USB hub found
[107480.510605] usb 3-2.3: USB disconnect, device number 20
[109622.175331] usb 3-2.3: new high-speed USB device number 21 using xhci_hcd
[109622.197013] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[109622.197015] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[109622.197017] usb 3-2.3: Product: USB2.0 Hub
[109622.198285] hub 3-2.3:1.0: USB hub found
[109642.524482] wlp4s0: authenticate with 64:59:f8:94:86:b8
[109642.544859] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[109642.551816] wlp4s0: authenticated
[109642.555233] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[109643.355227] wlp4s0: associate with 64:59:f8:94:86:b8 (try 2/3)
[109643.639231] wlp4s0: associate with 64:59:f8:94:86:b8 (try 3/3)
[109643.727943] wlp4s0: association with 64:59:f8:94:86:b8 timed out
[109683.933974] wlp4s0: authenticate with 64:59:f8:94:86:b8
[109683.948341] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[109683.955966] wlp4s0: authenticated
[109683.958935] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[109683.966756] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[109683.966883] wlp4s0: associated
[109683.967160] ath: EEPROM regdomain: 0x817c
[109683.967161] ath: EEPROM indicates we should expect a country code
[109683.967163] ath: doing EEPROM country->regdmn map search
[109683.967164] ath: country maps to regdmn code: 0x37
[109683.967165] ath: Country alpha2 being used: IT
[109683.967166] ath: Regpair used: 0x37
[109683.967168] ath: regdomain 0x817c dynamically updated by country element
[109683.982709] IPv6: ADDRCONF(
[109751.519621] wlp4s0: authenticate with 64:59:f8:94:86:b8
[109751.540172] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[109751.557960] wlp4s0: authenticated
[109751.558475] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[109751.576177] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[109751.576301] wlp4s0: associated
[109751.576437] ath: EEPROM regdomain: 0x817c
[109751.576438] ath: EEPROM indicates we should expect a country code
[109751.576439] ath: doing EEPROM country->regdmn map search
[109751.576441] ath: country maps to regdmn code: 0x37
[109751.576442] ath: Country alpha2 being used: IT
[109751.576443] ath: Regpair used: 0x37
[109751.576444] ath: regdomain 0x817c dynamically updated by country element
[109766.535430] wlp4s0: authenticate with 64:59:f8:94:86:b8
[109766.555979] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[109766.845211] wlp4s0: authenticated
[109766.846416] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[109766.958464] wlp4s0: associate with 64:59:f8:94:86:b8 (try 2/3)
[109767.810400] wlp4s0: associate with 64:59:f8:94:86:b8 (try 3/3)
[109767.974446] wlp4s0: association with 64:59:f8:94:86:b8 timed out
[109807.983260] wlp4s0: authenticate with 64:59:f8:94:86:b8
[109807.997591] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[109808.008369] wlp4s0: authenticated
[109808.010176] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[109808.016061] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[109808.016184] wlp4s0: associated
[109808.016315] ath: EEPROM regdomain: 0x817c
[109808.016316] ath: EEPROM indicates we should expect a country code
[109808.016316] ath: doing EEPROM country->regdmn map search
[109808.016317] ath: country maps to regdmn code: 0x37
[109808.016318] ath: Country alpha2 being used: IT
[109808.016319] ath: Regpair used: 0x37
[109808.016320] ath: regdomain 0x817c dynamically updated by country element
[109808.033830] IPv6: ADDRCONF(
[109884.097089] usb 3-2.3: USB disconnect, device number 21
[109967.265358] usb 3-2.3: new high-speed USB device number 22 using xhci_hcd
[109967.287126] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[109967.287130] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[109967.287133] usb 3-2.3: Product: USB2.0 Hub
[109967.288609] hub 3-2.3:1.0: USB hub found
[109980.542673] wlp4s0: authenticate with 64:59:f8:94:86:b8
[109980.562876] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[109980.652079] wlp4s0: authenticated
[109980.653224] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[109980.791870] wlp4s0: associate with 64:59:f8:94:86:b8 (try 2/3)
[109980.868251] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[109980.868397] wlp4s0: associated
[109980.868610] ath: EEPROM regdomain: 0x817c
[109980.868612] ath: EEPROM indicates we should expect a country code
[109980.868614] ath: doing EEPROM country->regdmn map search
[109980.868616] ath: country maps to regdmn code: 0x37
[109980.868618] ath: Country alpha2 being used: IT
[109980.868619] ath: Regpair used: 0x37
[109980.868622] ath: regdomain 0x817c dynamically updated by country element
[109983.514773] wlp4s0: authenticate with 64:59:f8:94:86:b8
[109983.535015] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[109983.558227] wlp4s0: authenticated
[109983.561228] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[109983.829696] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[109983.829832] wlp4s0: associated
[109983.830019] ath: EEPROM regdomain: 0x817c
[109983.830021] ath: EEPROM indicates we should expect a country code
[109983.830022] ath: doing EEPROM country->regdmn map search
[109983.830023] ath: country maps to regdmn code: 0x37
[109983.830025] ath: Country alpha2 being used: IT
[109983.830026] ath: Regpair used: 0x37
[109983.830028] ath: regdomain 0x817c dynamically updated by country element
[109986.514564] wlp4s0: authenticate with 64:59:f8:94:86:b8
[109986.534963] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[109986.718958] wlp4s0: authenticated
[109986.721241] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[109986.735078] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[109986.735196] wlp4s0: associated
[109986.735321] ath: EEPROM regdomain: 0x817c
[109986.735322] ath: EEPROM indicates we should expect a country code
[109986.735323] ath: doing EEPROM country->regdmn map search
[109986.735324] ath: country maps to regdmn code: 0x37
[109986.735326] ath: Country alpha2 being used: IT
[109986.735327] ath: Regpair used: 0x37
[109986.735329] ath: regdomain 0x817c dynamically updated by country element
[109996.043373] wlp4s0: authenticate with 64:59:f8:94:86:b8
[109996.057875] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[109996.221127] wlp4s0: authenticated
[109996.225161] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[109996.621187] wlp4s0: associate with 64:59:f8:94:86:b8 (try 2/3)
[109996.880181] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[109996.880296] wlp4s0: associated
[109996.880433] ath: EEPROM regdomain: 0x817c
[109996.880434] ath: EEPROM indicates we should expect a country code
[109996.880435] ath: doing EEPROM country->regdmn map search
[109996.880436] ath: country maps to regdmn code: 0x37
[109996.880437] ath: Country alpha2 being used: IT
[109996.880438] ath: Regpair used: 0x37
[109996.880439] ath: regdomain 0x817c dynamically updated by country element
[110002.884197] IPv6: ADDRCONF(
[110005.526539] wlp4s0: authenticate with 64:59:f8:94:86:b8
[110005.546739] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[110005.920168] wlp4s0: authenticated
[110005.921096] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[110005.940176] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[110005.940302] wlp4s0: associated
[110005.940464] ath: EEPROM regdomain: 0x817c
[110005.940466] ath: EEPROM indicates we should expect a country code
[110005.940467] ath: doing EEPROM country->regdmn map search
[110005.940469] ath: country maps to regdmn code: 0x37
[110005.940470] ath: Country alpha2 being used: IT
[110005.940471] ath: Regpair used: 0x37
[110005.940473] ath: regdomain 0x817c dynamically updated by country element
[110008.534657] wlp4s0: authenticate with 64:59:f8:94:86:b8
[110008.554822] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[110009.018104] wlp4s0: authenticated
[110009.021138] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[110009.181162] wlp4s0: associate with 64:59:f8:94:86:b8 (try 2/3)
[110009.184967] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[110009.185159] wlp4s0: associated
[110009.185396] ath: EEPROM regdomain: 0x817c
[110009.185397] ath: EEPROM indicates we should expect a country code
[110009.185399] ath: doing EEPROM country->regdmn map search
[110009.185400] ath: country maps to regdmn code: 0x37
[110009.185402] ath: Country alpha2 being used: IT
[110009.185403] ath: Regpair used: 0x37
[110009.185405] ath: regdomain 0x817c dynamically updated by country element
[110009.281009] usb 3-2.3: USB disconnect, device number 22
[110020.574956] wlp4s0: authenticate with 64:59:f8:94:86:b8
[110020.594623] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[110020.666654] wlp4s0: authenticated
[110020.669017] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[110020.889057] wlp4s0: associate with 64:59:f8:94:86:b8 (try 2/3)
[110021.145098] wlp4s0: associate with 64:59:f8:94:86:b8 (try 3/3)
[110021.305024] wlp4s0: association with 64:59:f8:94:86:b8 timed out
[110022.305006] usb 3-2.3: new high-speed USB device number 23 using xhci_hcd
[110022.326775] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[110022.326782] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[110022.326786] usb 3-2.3: Product: USB2.0 Hub
[110022.328133] hub 3-2.3:1.0: USB hub found
[110028.894069] wlp4s0: authenticate with 64:59:f8:94:86:b8
[110028.914785] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[110028.916744] wlp4s0: authenticated
[110028.920983] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[110028.924725] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[110028.924842] wlp4s0: associated
[110028.924987] ath: EEPROM regdomain: 0x817c
[110028.924988] ath: EEPROM indicates we should expect a country code
[110028.924989] ath: doing EEPROM country->regdmn map search
[110028.924990] ath: country maps to regdmn code: 0x37
[110028.924993] ath: Country alpha2 being used: IT
[110028.924996] ath: Regpair used: 0x37
[110028.924999] ath: regdomain 0x817c dynamically updated by country element
[110058.477765] wlp4s0: authenticate with 64:59:f8:94:86:b8
[110058.498412] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[110058.640347] wlp4s0: authenticated
[110058.640818] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[110058.713604] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[110058.713738] wlp4s0: associated
[110058.713912] ath: EEPROM regdomain: 0x817c
[110058.713914] ath: EEPROM indicates we should expect a country code
[110058.713915] ath: doing EEPROM country->regdmn map search
[110058.713917] ath: country maps to regdmn code: 0x37
[110058.713918] ath: Country alpha2 being used: IT
[110058.713919] ath: Regpair used: 0x37
[110058.713921] ath: regdomain 0x817c dynamically updated by country element
[110071.521843] wlp4s0: authenticate with 64:59:f8:94:86:b8
[110071.542445] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[110071.660804] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 2/3)
[110072.059355] wlp4s0: authenticated
[110072.060809] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[110072.324838] wlp4s0: associate with 64:59:f8:94:86:b8 (try 2/3)
[110072.328852] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[110072.329060] wlp4s0: associated
[110072.329301] ath: EEPROM regdomain: 0x817c
[110072.329303] ath: EEPROM indicates we should expect a country code
[110072.329305] ath: doing EEPROM country->regdmn map search
[110072.329307] ath: country maps to regdmn code: 0x37
[110072.329309] ath: Country alpha2 being used: IT
[110072.329311] ath: Regpair used: 0x37
[110072.329313] ath: regdomain 0x817c dynamically updated by country element
[110157.489897] wlp4s0: authenticate with 64:59:f8:94:86:b8
[110157.510035] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[110157.512932] wlp4s0: authenticated
[110157.516337] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[110157.521414] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[110157.521524] wlp4s0: associated
[110157.521626] ath: EEPROM regdomain: 0x817c
[110157.521626] ath: EEPROM indicates we should expect a country code
[110157.521627] ath: doing EEPROM country->regdmn map search
[110157.521627] ath: country maps to regdmn code: 0x37
[110157.521628] ath: Country alpha2 being used: IT
[110157.521629] ath: Regpair used: 0x37
[110157.521630] ath: regdomain 0x817c dynamically updated by country element
[110313.529260] wlp4s0: authenticate with 64:59:f8:94:86:b8
[110313.549222] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[110313.663585] wlp4s0: authenticated
[110313.667657] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[110313.678745] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[110313.678873] wlp4s0: associated
[110313.679016] ath: EEPROM regdomain: 0x817c
[110313.679017] ath: EEPROM indicates we should expect a country code
[110313.679018] ath: doing EEPROM country->regdmn map search
[110313.679020] ath: country maps to regdmn code: 0x37
[110313.679021] ath: Country alpha2 being used: IT
[110313.679022] ath: Regpair used: 0x37
[110313.679024] ath: regdomain 0x817c dynamically updated by country element
[110328.592562] wlp4s0: authenticate with 64:59:f8:94:86:b8
[110328.606889] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[110328.608884] wlp4s0: authenticated
[110328.615563] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[110328.619474] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[110328.619626] wlp4s0: associated
[110328.619741] ath: EEPROM regdomain: 0x817c
[110328.619741] ath: EEPROM indicates we should expect a country code
[110328.619742] ath: doing EEPROM country->regdmn map search
[110328.619743] ath: country maps to regdmn code: 0x37
[110328.619744] ath: Country alpha2 being used: IT
[110328.619746] ath: Regpair used: 0x37
[110328.619748] ath: regdomain 0x817c dynamically updated by country element
[110328.637461] IPv6: ADDRCONF(
[110421.185579] usb 3-2.3: USB disconnect, device number 23
[110665.890091] usb 3-2.3: new high-speed USB device number 24 using xhci_hcd
[110665.911778] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[110665.911780] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[110665.911782] usb 3-2.3: Product: USB2.0 Hub
[110665.913018] hub 3-2.3:1.0: USB hub found
[110672.539551] wlp4s0: authenticate with 64:59:f8:94:86:b8
[110672.559674] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[110672.562327] wlp4s0: authenticated
[110672.566011] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[110672.572969] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[110672.573086] wlp4s0: associated
[110672.573211] ath: EEPROM regdomain: 0x817c
[110672.573211] ath: EEPROM indicates we should expect a country code
[110672.573212] ath: doing EEPROM country->regdmn map search
[110672.573212] ath: country maps to regdmn code: 0x37
[110672.573213] ath: Country alpha2 being used: IT
[110672.573213] ath: Regpair used: 0x37
[110672.573215] ath: regdomain 0x817c dynamically updated by country element
[110686.913764] usb 3-2.3: USB disconnect, device number 24
[113379.745780] usb 3-2.3: new high-speed USB device number 25 using xhci_hcd
[113379.767731] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[113379.767737] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[113379.767741] usb 3-2.3: Product: USB2.0 Hub
[113379.769267] hub 3-2.3:1.0: USB hub found
[113477.316275] usb 3-2.3: USB disconnect, device number 25
[113566.625163] usb 3-2.3: new high-speed USB device number 26 using xhci_hcd
[113566.647045] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[113566.647050] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[113566.647054] usb 3-2.3: Product: USB2.0 Hub
[113566.648597] hub 3-2.3:1.0: USB hub found
[113610.436723] usb 3-2.3: USB disconnect, device number 26
[178187.234862] usb 3-2.3: new high-speed USB device number 27 using xhci_hcd
[178187.256123] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[178187.256125] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[178187.256127] usb 3-2.3: Product: USB2.0 Hub
[178187.257264] hub 3-2.3:1.0: USB hub found
[178409.474210] usb 3-2.3: USB disconnect, device number 27
[179429.593004] wlp4s0: cannot understand ECSA IE operating class, 4, ignoring
[179429.643466] wlp4s0: cannot understand ECSA IE operating class, 4, ignoring
[179429.745831] wlp4s0: cannot understand ECSA IE operating class, 4, ignoring
[179429.848246] wlp4s0: cannot understand ECSA IE operating class, 4, ignoring
[179429.950682] wlp4s0: cannot understand ECSA IE operating class, 4, ignoring
[192162.299719] wlp4s0: authenticate with 64:59:f8:94:86:b8
[192162.319933] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[192162.377952] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 2/3)
[192162.433536] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 3/3)
[192162.496926] wlp4s0: authentication with 64:59:f8:94:86:b8 timed out
[192164.023376] wlp4s0: authenticate with 64:59:f8:94:86:b8
[192164.043867] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[192164.119974] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 2/3)
[192164.212721] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 3/3)
[192164.279420] wlp4s0: authentication with 64:59:f8:94:86:b8 timed out
[192166.311662] wlp4s0: authenticate with 64:59:f8:94:86:b8
[192166.331877] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[192166.338207] wlp4s0: authenticated
[192166.340951] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[192166.346359] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[192166.346458] wlp4s0: associated
[192166.346545] ath: EEPROM regdomain: 0x817c
[192166.346546] ath: EEPROM indicates we should expect a country code
[192166.346547] ath: doing EEPROM country->regdmn map search
[192166.346547] ath: country maps to regdmn code: 0x37
[192166.346548] ath: Country alpha2 being used: IT
[192166.346548] ath: Regpair used: 0x37
[192166.346549] ath: regdomain 0x817c dynamically updated by country element
[192174.288147] wlp4s0: authenticate with 64:59:f8:94:86:b8
[192174.307957] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[192174.400483] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 2/3)
[192174.451679] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 3/3)
[192174.495229] wlp4s0: authenticated
[192174.498417] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[192174.562272] wlp4s0: associate with 64:59:f8:94:86:b8 (try 2/3)
[192174.646834] wlp4s0: associate with 64:59:f8:94:86:b8 (try 3/3)
[192174.707821] wlp4s0: association with 64:59:f8:94:86:b8 timed out
[192227.671535] wlp4s0: authenticate with 64:59:f8:94:86:b8
[192227.685738] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[192227.790307] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 2/3)
[192227.863778] wlp4s0: authenticated
[192227.866284] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[192227.871566] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[192227.871686] wlp4s0: associated
[192227.871814] ath: EEPROM regdomain: 0x817c
[192227.871815] ath: EEPROM indicates we should expect a country code
[192227.871816] ath: doing EEPROM country->regdmn map search
[192227.871817] ath: country maps to regdmn code: 0x37
[192227.871818] ath: Country alpha2 being used: IT
[192227.871819] ath: Regpair used: 0x37
[192227.871820] ath: regdomain 0x817c dynamically updated by country element
[192227.883318] IPv6: ADDRCONF(
[222000.141729] wlp4s0: authenticate with 64:59:f8:94:86:b8
[222000.161935] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[222000.213689] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 2/3)
[222000.280538] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 3/3)
[222000.363746] wlp4s0: authentication with 64:59:f8:94:86:b8 timed out
[251192.328518] wlp4s0: authenticate with 64:59:f8:94:86:b8
[251192.342805] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[251192.344908] wlp4s0: authenticated
[251192.348675] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[251192.353957] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[251192.354068] wlp4s0: associated
[251192.354177] ath: EEPROM regdomain: 0x817c
[251192.354178] ath: EEPROM indicates we should expect a country code
[251192.354178] ath: doing EEPROM country->regdmn map search
[251192.354179] ath: country maps to regdmn code: 0x37
[251192.354180] ath: Country alpha2 being used: IT
[251192.354180] ath: Regpair used: 0x37
[251192.354182] ath: regdomain 0x817c dynamically updated by country element
[251192.367297] IPv6: ADDRCONF(
[280607.988332] wlp4s0: authenticate with 64:59:f8:94:86:b8
[280608.008090] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[280608.010070] wlp4s0: authenticated
[280608.010404] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[280608.014056] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=2)
[280608.014173] wlp4s0: associated
[280608.014277] ath: EEPROM regdomain: 0x817c
[280608.014278] ath: EEPROM indicates we should expect a country code
[280608.014279] ath: doing EEPROM country->regdmn map search
[280608.014280] ath: country maps to regdmn code: 0x37
[280608.014280] ath: Country alpha2 being used: IT
[280608.014281] ath: Regpair used: 0x37
[280608.014282] ath: regdomain 0x817c dynamically updated by country element
[308401.933699] wlp4s0: authenticate with 64:59:f8:94:86:b8
[308401.953774] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[308402.010266] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 2/3)
[308402.054236] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 3/3)
[308402.111252] wlp4s0: authentication with 64:59:f8:94:86:b8 timed out
[334059.380756] usb 3-2.3: new high-speed USB device number 28 using xhci_hcd
[334059.402401] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[334059.402405] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[334059.402407] usb 3-2.3: Product: USB2.0 Hub
[334059.405078] hub 3-2.3:1.0: USB hub found
[334249.366077] usb 3-2.3: USB disconnect, device number 28
[334255.174240] wlp4s0: authenticate with 64:59:f8:94:86:b8
[334255.188625] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[334255.191612] wlp4s0: authenticated
[334255.192127] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[334255.203442] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=5)
[334255.203563] wlp4s0: associated
[334255.203675] ath: EEPROM regdomain: 0x817c
[334255.203676] ath: EEPROM indicates we should expect a country code
[334255.203677] ath: doing EEPROM country->regdmn map search
[334255.203678] ath: country maps to regdmn code: 0x37
[334255.203679] ath: Country alpha2 being used: IT
[334255.203679] ath: Regpair used: 0x37
[334255.203680] ath: regdomain 0x817c dynamically updated by country element
[334255.230080] IPv6: ADDRCONF(
[334258.804206] usb 3-2.3: new high-speed USB device number 29 using xhci_hcd
[334258.825911] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[334258.825914] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[334258.825916] usb 3-2.3: Product: USB2.0 Hub
[334258.827364] hub 3-2.3:1.0: USB hub found
[334280.854123] usb 3-2.3: USB disconnect, device number 29
[334307.192017] usb 3-2.3: new high-speed USB device number 30 using xhci_hcd
[334307.213391] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[334307.213395] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[334307.213398] usb 3-2.3: Product: USB2.0 Hub
[334307.214685] hub 3-2.3:1.0: USB hub found
[334354.582182] usb 3-2.3: USB disconnect, device number 30
[337638.846875] wlp4s0: authenticate with 64:59:f8:94:86:b8
[337638.867536] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[337638.875301] wlp4s0: authenticated
[337638.877960] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[337638.940846] wlp4s0: associate with 64:59:f8:94:86:b8 (try 2/3)
[337639.089982] wlp4s0: associate with 64:59:f8:94:86:b8 (try 3/3)
[337639.147366] wlp4s0: association with 64:59:f8:94:86:b8 timed out
[337640.675024] wlp4s0: authenticate with 64:59:f8:94:86:b8
[337640.695559] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[337640.698550] wlp4s0: authenticated
[337640.701960] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[337640.796439] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=4)
[337640.796564] wlp4s0: associated
[337640.796686] ath: EEPROM regdomain: 0x817c
[337640.796687] ath: EEPROM indicates we should expect a country code
[337640.796688] ath: doing EEPROM country->regdmn map search
[337640.796689] ath: country maps to regdmn code: 0x37
[337640.796691] ath: Country alpha2 being used: IT
[337640.796692] ath: Regpair used: 0x37
[337640.796693] ath: regdomain 0x817c dynamically updated by country element
[340671.609086] usb 3-2.3: new high-speed USB device number 31 using xhci_hcd
[340671.630904] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[340671.630908] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[340671.630909] usb 3-2.3: Product: USB2.0 Hub
[340671.632267] hub 3-2.3:1.0: USB hub found
[340850.588008] usb 3-2.3: USB disconnect, device number 31
[340918.717849] wlp4s0: authenticate with 64:59:f8:94:86:b8
[340918.737960] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[340918.739932] wlp4s0: authenticated
[340918.744196] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[340918.748807] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=4)
[340918.748926] wlp4s0: associated
[340918.749046] ath: EEPROM regdomain: 0x817c
[340918.749047] ath: EEPROM indicates we should expect a country code
[340918.749047] ath: doing EEPROM country->regdmn map search
[340918.749048] ath: country maps to regdmn code: 0x37
[340918.749049] ath: Country alpha2 being used: IT
[340918.749050] ath: Regpair used: 0x37
[340918.749051] ath: regdomain 0x817c dynamically updated by country element
[346787.712477] usb 3-2.3: new high-speed USB device number 32 using xhci_hcd
[346787.734389] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[346787.734394] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[346787.734397] usb 3-2.3: Product: USB2.0 Hub
[346787.736012] hub 3-2.3:1.0: USB hub found
[346896.802128] usb 3-2.3: USB disconnect, device number 32
[347298.178640] usb 3-2.3: new high-speed USB device number 33 using xhci_hcd
[347298.199858] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[347298.199860] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[347298.199861] usb 3-2.3: Product: USB2.0 Hub
[347298.201053] hub 3-2.3:1.0: USB hub found
[347470.498728] usb 3-2.3: USB disconnect, device number 33
[347524.737927] usb 3-2.3: new high-speed USB device number 34 using xhci_hcd
[347524.759640] usb 3-2.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[347524.759643] usb 3-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[347524.759644] usb 3-2.3: Product: USB2.0 Hub
[347524.760911] hub 3-2.3:1.0: USB hub found
[348115.804894] wlp4s0: authenticate with 64:59:f8:94:86:b8
[348115.825391] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[348116.447871] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 2/3)
[348116.449947] wlp4s0: authenticated
[348116.451874] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[348116.455656] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=4)
[348116.455864] wlp4s0: associated
[348116.456128] ath: EEPROM regdomain: 0x817c
[348116.456131] ath: EEPROM indicates we should expect a country code
[348116.456133] ath: doing EEPROM country->regdmn map search
[348116.456134] ath: country maps to regdmn code: 0x37
[348116.456137] ath: Country alpha2 being used: IT
[348116.456138] ath: Regpair used: 0x37
[348116.456145] ath: regdomain 0x817c dynamically updated by country element
[348136.789409] wlp4s0: authenticate with 64:59:f8:94:86:b8
[348136.809404] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[348136.815859] wlp4s0: authenticated
[348136.819739] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[348137.299729] wlp4s0: associate with 64:59:f8:94:86:b8 (try 2/3)
[348137.316689] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=4)
[348137.316812] wlp4s0: associated
[348137.316950] ath: EEPROM regdomain: 0x817c
[348137.316951] ath: EEPROM indicates we should expect a country code
[348137.316952] ath: doing EEPROM country->regdmn map search
[348137.316953] ath: country maps to regdmn code: 0x37
[348137.316954] ath: Country alpha2 being used: IT
[348137.316955] ath: Regpair used: 0x37
[348137.316957] ath: regdomain 0x817c dynamically updated by country element
[348165.733225] wlp4s0: authenticate with 64:59:f8:94:86:b8
[348165.753358] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[348165.763742] wlp4s0: authenticated
[348165.767695] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[348166.346924] wlp4s0: associate with 64:59:f8:94:86:b8 (try 2/3)
[348166.499668] wlp4s0: associate with 64:59:f8:94:86:b8 (try 3/3)
[348166.505198] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=4)
[348166.505358] wlp4s0: associated
[348166.505638] ath: EEPROM regdomain: 0x817c
[348166.505641] ath: EEPROM indicates we should expect a country code
[348166.505643] ath: doing EEPROM country->regdmn map search
[348166.505646] ath: country maps to regdmn code: 0x37
[348166.505648] ath: Country alpha2 being used: IT
[348166.505650] ath: Regpair used: 0x37
[348166.505654] ath: regdomain 0x817c dynamically updated by country element
[348179.868191] wlp4s0: authenticate with 64:59:f8:94:86:b8
[348179.889350] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[348180.172414] wlp4s0: aborting authentication with 64:59:f8:94:86:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[348181.272664] wlp4s0: authenticate with 64:59:f8:94:86:b8
[348181.287034] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[348181.436241] wlp4s0: authenticated
[348181.439625] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[348181.731666] wlp4s0: associate with 64:59:f8:94:86:b8 (try 2/3)
[348181.735662] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=4)
[348181.735867] wlp4s0: associated
[348181.736167] ath: EEPROM regdomain: 0x817c
[348181.736170] ath: EEPROM indicates we should expect a country code
[348181.736173] ath: doing EEPROM country->regdmn map search
[348181.736176] ath: country maps to regdmn code: 0x37
[348181.736179] ath: Country alpha2 being used: IT
[348181.736182] ath: Regpair used: 0x37
[348181.736186] ath: regdomain 0x817c dynamically updated by country element
[348184.732654] wlp4s0: authenticate with 64:59:f8:94:86:b8
[348184.753367] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[348184.760309] wlp4s0: authenticated
[348184.763610] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[348184.767466] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=4)
[348184.767591] wlp4s0: associated
[348184.767698] ath: EEPROM regdomain: 0x817c
[348184.767699] ath: EEPROM indicates we should expect a country code
[348184.767699] ath: doing EEPROM country->regdmn map search
[348184.767700] ath: country maps to regdmn code: 0x37
[348184.767701] ath: Country alpha2 being used: IT
[348184.767701] ath: Regpair used: 0x37
[348184.767702] ath: regdomain 0x817c dynamically updated by country element
[348184.788920] IPv6: ADDRCONF(
[348500.855482] wlp4s0: authenticate with 64:59:f8:94:86:b8
[348500.876106] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[348501.105715] wlp4s0: authenticated
[348501.106494] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[348501.126628] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=4)
[348501.126762] wlp4s0: associated
[348501.126969] ath: EEPROM regdomain: 0x817c
[348501.126971] ath: EEPROM indicates we should expect a country code
[348501.126973] ath: doing EEPROM country->regdmn map search
[348501.126975] ath: country maps to regdmn code: 0x37
[348501.126977] ath: Country alpha2 being used: IT
[348501.126978] ath: Regpair used: 0x37
[348501.126981] ath: regdomain 0x817c dynamically updated by country element
[348523.803805] wlp4s0: authenticate with 64:59:f8:94:86:b8
[348523.824026] wlp4s0: send auth to 64:59:f8:94:86:b8 (try 1/3)
[348524.173342] wlp4s0: authenticated
[348524.174403] wlp4s0: associate with 64:59:f8:94:86:b8 (try 1/3)
[348524.216071] wlp4s0: RX AssocResp from 64:59:f8:94:86:b8 (capab=0x411 status=0 aid=4)
[348524.216218] wlp4s0: associated
[348524.216450] ath: EEPROM regdomain: 0x817c
[348524.216452] ath: EEPROM indicates we should expect a country code
[348524.216454] ath: doing EEPROM country->regdmn map search
[348524.216456] ath: country maps to regdmn code: 0x37
[348524.216458] ath: Country alpha2 being used: IT
[348524.216460] ath: Regpair used: 0x37
[348524.216463] ath: regdomain 0x817c dynamically updated by country element
Release Date: 01/23/2014
Serial services are supported (int 14h)
Manufacturer: ASUSTeK COMPUTER INC.
Product Name: N550JK
Serial Number: E3N0CY10067910C
Manufacturer: ASUSTeK COMPUTER INC.
Product Name: N550JK
Serial Number: BSN123456789012
Manufacturer: ASUSTeK COMPUTER INC.
Serial Number: E3N0CY10067910C
Manufacturer: Intel
Serial Number: Not Specified
Manufacturer: Hynix/Hyundai
Serial Number: 0C8A6329
Manufacturer: [Empty]
Serial Number: [Empty]
Manufacturer: Hynix/Hyundai
Serial Number: 0C7A6335
Manufacturer: [Empty]
Serial Number: [Empty]
enp5s0 no wireless extensions.
lo no wireless extensions.
wlp4s0 IEEE 802.11 ESSID:"
Bit Rate=13 Mb/s Tx-Power=15 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=39/70 Signal level=-71 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:19 Missed beacon:0
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
/etc/modprobe.
cat: /var/lib/
20: PCI 500.0: 0200 Ethernet controller
[Created at pci.386]
Unique ID: D2Iq.1dMOGO3xBL9
Parent ID: Z7uZ.4LNy0EQPaq3
SysFS ID: /devices/
SysFS BusID: 0000:05:00.0
Hardware Class: network
Model: "Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x200f
Revision: 0x0c
Driver: "r8169"
Driver Modules: "r8169"
Device File: enp5s0
I/O Ports: 0xd000-0xdfff (rw)
Memory Range: 0xf7800000-
Memory Range: 0xf2100000-
IRQ: 19 (no events)
HW Address: 40:16:7e:11:aa:33
Permanent HW Address: 40:16:7e:11:aa:33
Link detected: no
Module Alias: "pci:v000010ECd
Driver Info #0:
Driver Status: r8169 is active
Driver Activation Cmd: "modprobe r8169"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #14 (PCI bridge)
22: PCI 400.0: 0282 WLAN controller
[Created at pci.386]
Unique ID: YVtp.1DelVkjph71
Parent ID: hoOk.2WUS35B+W33
SysFS ID: /devices/
SysFS BusID: 0000:04:00.0
Hardware Class: network
Model: "Qualcomm Atheros AR9485 Wireless Network Adapter"
Vendor: pci 0x168c "Qualcomm Atheros"
Device: pci 0x0032 "AR9485 Wireless Network Adapter"
SubVendor: pci 0x1a3b "AzureWave"
SubDevice: pci 0x2126
Revision: 0x01
Driver: "ath9k"
Driver Modules: "ath9k", "ath9k"
Device File: wlp4s0
Features: WLAN
Memory Range: 0xf7900000-
Memory Range: 0xf7980000-
IRQ: 18 (5270716 events)
HW Address: 54:27:1e:27:4d:c3
Permanent HW Address: 54:27:1e:27:4d:c3
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v0000168Cd
Driver Info #0:
Driver Status: ath9k is active
Driver Activation Cmd: "modprobe ath9k"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #25 (PCI bridge)
root 882 0.0 0.1 560560 22304 ? Ssl mag11 2:43 /usr/sbin/
root 897 0.0 0.1 47908 20280 ? Ss mag11 0:00 /usr/bin/python3 /usr/bin/
root 922 0.0 0.0 14036 9236 ? Ss mag11 0:30 /sbin/wpa_
marco 11268 0.1 0.6 408784 108496 ? SLl mag12 7:13 /opt/google/
marco 101496 0.0 0.0 17664 2640 pts/1 S+ 12:10 0:00 grep --color=auto -E wpa|icd|etwork
Command 'netstat' not found, but can be installed with:
sudo apt install net-tools
# This file is managed by man:systemd-
#
# This is a dynamic resolv.conf file for connecting local clients to the
# internal DNS stub resolver of systemd-resolved. This file lists all
# configured search domains.
#
# Run "resolvectl status" to see details about the uplink DNS servers
# currently in use.
#
# Third party programs must not access this file directly, but only through the
# symlink at /etc/resolv.conf. To manage man:resolv.conf(5) in a different way,
# replace this symlink by a static file or a different symlink.
#
# See man:systemd-
# operation for /etc/resolv.conf.
nameserver 127.0.0.53
options edns0
search station
total 129644
3932161 drwxr-xr-x 4 root root 4096 mag 8 06:53 .
2 drwxr-xr-x 21 root root 4096 apr 29 17:44 ..
3932459 -rw-r--r-- 1 root root 237718 apr 22 16:08 config-
3932464 -rw-r--r-- 1 root root 237718 apr 29 15:34 config-
1 drwx------ 3 root root 4096 gen 1 1970 efi
3932163 drwxr-xr-x 4 root root 4096 mag 8 06:53 grub
3932462 lrwxrwxrwx 1 root root 27 mag 7 06:54 initrd.img -> initrd.
3932171 -rw-r--r-- 1 root root 49440168 apr 29 15:31 initrd.
3932463 -rw-r--r-- 1 root root 49449087 mag 7 06:55 initrd.
3932461 lrwxrwxrwx 1 root root 27 mag 7 06:54 initrd.img.old -> initrd.
3932168 -rw-r--r-- 1 root root 182704 feb 14 00:09 memtest86+.bin
3932169 -rw-r--r-- 1 root root 184380 feb 14 00:09 memtest86+.elf
3932170 -rw-r--r-- 1 root root 184884 feb 14 00:09 memtest86+
3932457 -rw------- 1 root root 4736015 apr 22 16:08 System.
3932458 -rw------- 1 root root 4736015 apr 29 15:34 System.
3932167 lrwxrwxrwx 1 root root 24 mag 7 06:54 vmlinuz -> vmlinuz-
3932460 -rw------- 1 root root 11657976 apr 22 16:43 vmlinuz-
3932465 -rw------- 1 root root 11657976 apr 29 15:54 vmlinuz-
3932466 lrwxrwxrwx 1 root root 24 mag 7 06:54 vmlinuz.old -> vmlinuz-
ubuntu-
--2020-05-15 12:10:14-- https:/
Resolving pci-ids.ucw.cz (pci-ids.ucw.cz)... failed: Temporary failure in name resolution.
wget: unable to resolve host address ‘pci-ids.ucw.cz’
update-pciids: download failed
sudo: update-usbids: command not found
Module Size Used by
rfcomm 81920 4
ccm 20480 6
cmac 16384 3
algif_hash 16384 1
algif_skcipher 16384 1
af_alg 24576 6 algif_hash,
bnep 24576 2
nvidia_uvm 970752 0
snd_hda_codec_hdmi 61440 1
nls_iso8859_1 16384 1
intel_rapl_msr 20480 0
intel_rapl_common 24576 1 intel_rapl_msr
x86_pkg_
intel_powerclamp 20480 0
coretemp 20480 0
snd_hda_
snd_hda_
ledtrig_audio 16384 2 snd_hda_
kvm_intel 286720 0
nvidia_drm 49152 9
snd_hda_intel 53248 10
kvm 663552 1 kvm_intel
snd_intel_dspcfg 24576 1 snd_hda_intel
snd_hda_codec 131072 4 snd_hda_
nvidia_modeset 1114112 6 nvidia_drm
snd_hda_core 90112 5 snd_hda_
mei_hdcp 24576 0
uvcvideo 98304 0
snd_hwdep 20480 1 snd_hda_codec
snd_pcm 106496 4 snd_hda_
videobuf2_vmalloc 20480 1 uvcvideo
crct10dif_pclmul 16384 1
nvidia 20430848 447 nvidia_
videobuf2_memops 20480 1 videobuf2_vmalloc
ghash_clmulni_intel 16384 0
ath9k 151552 0
ath3k 24576 0
snd_seq_midi 20480 0
videobuf2_v4l2 24576 1 uvcvideo
aesni_intel 372736 8
snd_seq_midi_event 16384 1 snd_seq_midi
btusb 57344 0
videobuf2_common 49152 2 videobuf2_
crypto_simd 16384 1 aesni_intel
videodev 225280 3 videobuf2_
ath9k_common 36864 1 ath9k
snd_rawmidi 36864 1 snd_seq_midi
btrtl 24576 1 btusb
cryptd 24576 3 crypto_
ath9k_hw 475136 2 ath9k_common,ath9k
glue_helper 16384 1 aesni_intel
btbcm 16384 1 btusb
i915 1986560 4
rtsx_usb_ms 24576 0
snd_seq 69632 2 snd_seq_
mc 53248 4 videodev,
btintel 24576 1 btusb
ath 36864 3 ath9k_common,
intel_cstate 20480 0
memstick 20480 1 rtsx_usb_ms
mac80211 843776 1 ath9k
intel_rapl_perf 20480 0
bluetooth 581632 32 btrtl,btintel,
snd_seq_device 16384 3 snd_seq,
snd_timer 36864 2 snd_seq,snd_pcm
drm_kms_helper 184320 2 nvidia_drm,i915
cfg80211 704512 4 ath9k_common,
ipmi_devintf 20480 0
input_leds 16384 0
joydev 24576 0
ipmi_msghandler 106496 2 ipmi_devintf,nvidia
asus_nb_wmi 28672 0
libarc4 16384 1 mac80211
ecdh_generic 16384 2 bluetooth
snd 90112 31 snd_hda_
i2c_algo_bit 16384 1 i915
asus_wmi 32768 1 asus_nb_wmi
ecc 28672 1 ecdh_generic
fb_sys_fops 16384 1 drm_kms_helper
serio_raw 20480 0
syscopyarea 16384 1 drm_kms_helper
soundcore 16384 1 snd
sparse_keymap 16384 1 asus_wmi
mei_me 40960 1
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
mxm_wmi 16384 0
ie31200_edac 16384 0
mei 106496 3 mei_hdcp,mei_me
mac_hid 16384 0
asus_wireless 20480 0
sch_fq_codel 20480 2
parport_pc 40960 0
ppdev 24576 0
lp 20480 0
parport 53248 3 parport_pc,lp,ppdev
drm 491520 13 drm_kms_
ip_tables 32768 0
x_tables 40960 1 ip_tables
autofs4 45056 2
hid_generic 16384 0
usbhid 57344 0
hid 131072 2 usbhid,hid_generic
rtsx_usb_sdmmc 32768 0
rtsx_usb 28672 2 rtsx_usb_
crc32_pclmul 16384 0
psmouse 155648 0
r8169 90112 0
ahci 40960 2
lpc_ich 24576 0
i2c_i801 32768 0
libahci 32768 1 ahci
realtek 24576 1
wmi 32768 2 asus_wmi,mxm_wmi
video 49152 2 asus_wmi,i915
Question information
- Language:
- English Edit question
- Status:
- Answered
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Can you help with this problem?
Provide an answer of your own, or ask marco fedele for more information if necessary.