my wifi is very slow and i often looses connection (sometimes /etc/init.d/network-manager restart can solve momentarily the issue but it comes back anyway)

Asked by Dan

i'm running ubuntu 16.04.6 on an ASUS K73SM with a new motherboard (only difference is the NVIDIA GPU wich is GeForce 610M instead of original 630 i think.
I have big issues with the wifi, i've tried many things but none work properly.
I want to fix this so that i can get a reliable internet connexion (i'm now using my smartphone via USB to share the Wifi from the phone....)
my ISP is Orange, fiber 10 MB down 5 MB up
https://www.speedtest.net/my-result/a/5124489430 (via my smartphone, if i do it from my pc it won't even get to the final result)
there should be no problem

MANY THANKS IN ADVANCE FOR YOUR HELP !!!
Aly

aly@Waly-K73SM:~$ sudo apt-get update; sudo apt-get install usbutils pciutils hwinfo grep rfkill; sudo lshw -C network; rfkill list; sudo iwlist scan | grep -Ei 'chan|ssid'; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nnk | grep -iA2 net; lsusb; nmcli nm status; sudo lshw -short; uname -a; sudo updatedb; dmesg | grep -E '02:00|80211|acx|at76|ath|b43|bcm|brcm|CX|eth|ipw|ireless|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|ound|p54|prism|rror|rtl|RTL|rt2|RT2|rt3|RT3|rt5|RT5|rt6|RT6|rt7|RT7|usb|witch|wl';sudo dmidecode|grep -E 'anufact|roduct|erial|elease'; iwconfig; grep -E '80211|acx|at76|ath|b43|bcm|brcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|wmi|witch|wl' /etc/modprobe.d/*; cat /var/lib/NetworkManager/NetworkManager.state; sudo hwinfo --netcard ; ps -aux|grep -E 'wpa|icd|etwork'; netstat -rn ; cat /etc/resolv.conf; ls -lia /boot; grep tmpfs /etc/fstab; ubuntu-support-status; sudo update-pciids; sudo update-usbids; sudo lsmod
[sudo] Mot de passe de aly :
Ign :1 http://dl.google.com/linux/earth/deb stable InRelease
Atteint :2 http://archive.canonical.com/ubuntu xenial InRelease
Atteint :3 http://ppa.launchpad.net/cubic-wizard/release/ubuntu xenial InRelease
Atteint :4 http://dl.google.com/linux/earth/deb stable Release
Atteint :5 http://download.virtualbox.org/virtualbox/debian xenial InRelease
Atteint :6 http://ppa.launchpad.net/diesch/testing/ubuntu xenial InRelease
Atteint :7 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial InRelease
Réception de :8 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-updates InRelease [109 kB]
Atteint :9 http://ppa.launchpad.net/gezakovacs/ppa/ubuntu xenial InRelease
Ign :11 https://mkvtoolnix.download/ubuntu xenial InRelease
Atteint :12 http://ppa.launchpad.net/graphics-drivers/ppa/ubuntu xenial InRelease
Atteint :13 https://mkvtoolnix.download/ubuntu xenial Release
Atteint :15 http://ppa.launchpad.net/hamishmb/myppa/ubuntu xenial InRelease
Réception de :16 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-backports InRelease [107 kB]
Atteint :17 http://ppa.launchpad.net/hsoft/ppa/ubuntu xenial InRelease
Réception de :18 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-security InRelease [109 kB]
Atteint :19 http://ppa.launchpad.net/jonathonf/ffmpeg-4/ubuntu xenial InRelease
Réception de :20 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-updates/main amd64 Packages [990 kB]
Atteint :21 http://ppa.launchpad.net/jonathonf/vlc-3/ubuntu xenial InRelease
Atteint :22 http://ppa.launchpad.net/nemh/systemback/ubuntu xenial InRelease
Atteint :23 http://ppa.launchpad.net/teejee2008/ppa/ubuntu xenial InRelease
Atteint :24 http://ppa.launchpad.net/webupd8team/tor-browser/ubuntu xenial InRelease
Atteint :25 http://ppa.launchpad.net/yannubuntu/boot-repair/ubuntu xenial InRelease
Réception de :26 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-updates/main i386 Packages [841 kB]
Réception de :27 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-updates/main amd64 DEP-11 Metadata [325 kB]
Réception de :28 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-updates/main DEP-11 64x64 Icons [243 kB]
Réception de :29 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-updates/universe amd64 Packages [756 kB]
Réception de :30 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-updates/universe i386 Packages [691 kB]
Réception de :31 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-updates/universe Translation-en [315 kB]
Réception de :32 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-updates/universe amd64 DEP-11 Metadata [273 kB]
Réception de :33 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-updates/universe DEP-11 64x64 Icons [400 kB]
Réception de :34 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-updates/multiverse amd64 DEP-11 Metadata [5 960 B]
Réception de :35 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-updates/multiverse DEP-11 64x64 Icons [14,3 kB]
Réception de :36 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-backports/main amd64 DEP-11 Metadata [3 328 B]
Réception de :37 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-backports/universe amd64 DEP-11 Metadata [5 104 B]
Réception de :38 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-security/main amd64 DEP-11 Metadata [73,8 kB]
Réception de :39 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-security/main DEP-11 64x64 Icons [73,2 kB]
Réception de :40 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-security/universe amd64 Packages [449 kB]
Réception de :41 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-security/universe i386 Packages [390 kB]
Réception de :42 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-security/universe Translation-en [182 kB]
Réception de :43 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-security/universe amd64 DEP-11 Metadata [123 kB]
Réception de :44 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-security/universe DEP-11 64x64 Icons [193 kB]
Réception de :45 http://ftp.snt.utwente.nl/pub/os/linux/ubuntu xenial-security/multiverse amd64 DEP-11 Metadata [2 464 B]
6 674 ko réceptionnés en 1min 51s (60,0 ko/s)
Lecture des listes de paquets... Fait
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
usbutils est déjà la version la plus récente (1:007-4).
hwinfo est déjà la version la plus récente (21.23-1).
grep est déjà la version la plus récente (2.25-1~16.04.1).
pciutils est déjà la version la plus récente (1:3.3.1-1.1ubuntu1.3).
rfkill est déjà la version la plus récente (0.5-1ubuntu3.1).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 1 non mis à jour.
  *-network
       description: Interface réseau sans fil
       produit: AR9485 Wireless Network Adapter
       fabriquant: Qualcomm Atheros
       identifiant matériel: 0
       information bus: pci@0000:03:00.0
       nom logique: wlp3s0
       version: 01
       numéro de série: 00:08:ca:71:3b:ab
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm msi pciexpress bus_master cap_list rom ethernet physical wireless
       configuration: broadcast=yes driver=ath9k driverversion=4.15.0-54-generic firmware=N/A latency=0 link=yes multicast=yes wireless=IEEE 802.11
       ressources: irq:17 mémoire:de200000-de27ffff mémoire:de280000-de28ffff
  *-network
       description: Ethernet interface
       produit: AR8151 v2.0 Gigabit Ethernet
       fabriquant: Qualcomm Atheros
       identifiant matériel: 0
       information bus: pci@0000:04:00.0
       nom logique: enp4s0
       version: c0
       numéro de série: 08:60:6e:03:69:9b
       capacité: 1Gbit/s
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair
       ressources: irq:33 mémoire:dd800000-dd83ffff portE/S:a000(taille=128)
  *-network
       description: Ethernet interface
       identifiant matériel: 1
       nom logique: enp0s29u1u1u4
       numéro de série: be:9d:b8:6c:99:fa
       fonctionnalités: ethernet physical
       configuration: broadcast=yes driver=rndis_host driverversion=22-Aug-2005 firmware=RNDIS device ip=192.168.42.139 link=yes multicast=yes
0: hci0: Bluetooth
 Soft blocked: no
 Hard blocked: no
1: phy0: Wireless LAN
 Soft blocked: no
 Hard blocked: no
2: asus-wlan: Wireless LAN
 Soft blocked: no
 Hard blocked: no
enp0s29u1u1u4 Interface doesn't support scanning.

enp4s0 Interface doesn't support scanning.

lo Interface doesn't support scanning.

                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    ESSID:"Livebox-6816"
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    ESSID:"orange"
                    Channel:13
                    Frequency:2.472 GHz (Channel 13)
                    ESSID:"DIRECT-32-HP ENVY Photo 6200"
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.6 LTS"
03:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network Adapter [168c:0032] (rev 01)
 Subsystem: AzureWave AW-NE186H [1a3b:1186]
 Kernel driver in use: ath9k
--
04:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0)
 Subsystem: ASUSTeK Computer Inc. AR8151 v2.0 Gigabit Ethernet [1043:1851]
 Kernel driver in use: atl1c
 Kernel modules: atl1c
Bus 002 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 002 Device 003: ID 046d:c539 Logitech, Inc.
Bus 002 Device 009: ID 19d2:1373 ZTE WCDMA Technologies MSM
Bus 002 Device 013: ID 1000:1320 Speed Tech Corp.
Bus 002 Device 007: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Erreur : objet « nm » inconnu, essayez « nmcli help ».
Chemin matériel Périphérique Classe Description
=======================================================================
                                             system K73SD
/0 bus K73SD
/0/0 memory 64KiB BIOS
/0/4 processor Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
/0/4/5 memory 32KiB L1 cache
/0/4/6 memory 256KiB L2 cache
/0/4/7 memory 6MiB L3 cache
/0/40 memory 8GiB Mémoire Système
/0/40/0 memory 4GiB SODIMM DDR3 Synchrone 1600 MHz (0,6 ns)
/0/40/1 memory DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: POT-Cre
/0/40/2 memory 4GiB SODIMM DDR3 Synchrone 1600 MHz (0,6 ns)
/0/40/3 memory DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: POT-Cre
/0/100 bridge 2nd Generation Core Processor Family DRAM Controller
/0/100/1 bridge Xeon E3-1200/2nd Generation Core Processor Family PCI Express
/0/100/1/0 display GF119M [GeForce 610M]
/0/100/2 display 2nd Generation Core Processor Family Integrated Graphics Contr
/0/100/16 communication 6 Series/C200 Series Chipset Family MEI Controller #1
/0/100/1a bus 6 Series/C200 Series Chipset Family USB Enhanced Host Controll
/0/100/1a/1 usb1 bus EHCI Host Controller
/0/100/1a/1/1 bus Integrated Rate Matching Hub
/0/100/1a/1/1/4 scsi0 storage Mass Storage Device
/0/100/1a/1/1/4/0.0.0 /dev/sdc disk SCSI Disk
/0/100/1b multimedia 6 Series/C200 Series Chipset Family High Definition Audio Cont
/0/100/1c bridge 6 Series/C200 Series Chipset Family PCI Express Root Port 1
/0/100/1c.1 bridge 6 Series/C200 Series Chipset Family PCI Express Root Port 2
/0/100/1c.1/0 wlp3s0 network AR9485 Wireless Network Adapter
/0/100/1c.5 bridge 6 Series/C200 Series Chipset Family PCI Express Root Port 6
/0/100/1c.5/0 enp4s0 network AR8151 v2.0 Gigabit Ethernet
/0/100/1d bus 6 Series/C200 Series Chipset Family USB Enhanced Host Controll
/0/100/1d/1 usb2 bus EHCI Host Controller
/0/100/1d/1/1 bus Integrated Rate Matching Hub
/0/100/1d/1/1/1 bus USB 2.0 Hub
/0/100/1d/1/1/1/1 scsi7 storage Mass storage
/0/100/1d/1/1/1/1/0.0.0 /dev/sdd disk 4026MB Flash Disk
/0/100/1d/1/1/1/1/0.0.0/0 /dev/sdd disk 4026MB
/0/100/1d/1/1/1/1/0.0.0/0/1 /dev/sdd1 volume 3838MiB Windows FAT volume
/0/100/1d/1/1/1/4 communication ZTE USB Device
/0/100/1d/1/1/2 input USB Receiver
/0/100/1d/1/1/3 communication CSR8510 A10
/0/100/1f bridge HM65 Express Chipset LPC Controller
/0/100/1f.2 storage 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Co
/0/100/1f.3 bus 6 Series/C200 Series Chipset Family SMBus Controller
/0/1 scsi1 storage
/0/1/0.0.0 /dev/sda disk 2048GB Samsung SSD 850
/0/1/0.0.0/1 /dev/sda1 volume 350MiB Windows NTFS volume
/0/1/0.0.0/2 /dev/sda2 volume 190GiB Windows NTFS volume
/0/1/0.0.0/3 /dev/sda3 volume 1716GiB Extended partition
/0/1/0.0.0/3/5 /dev/sda5 volume 15GiB Linux swap / Solaris partition
/0/1/0.0.0/3/6 /dev/sda6 volume 1607GiB Linux filesystem partition
/0/1/0.0.0/3/7 /dev/sda7 volume 93GiB Linux filesystem partition
/0/2 scsi2 storage
/0/2/0.0.0 /dev/sdb disk 1TB ST1000LM024 HN-M
/0/2/0.0.0/1 /dev/sdb1 volume 25GiB Windows FAT volume
/0/2/0.0.0/2 /dev/sdb2 volume 372GiB Windows NTFS volume
/0/2/0.0.0/3 /dev/sdb3 volume 533GiB Windows NTFS volume
/0/3 scsi3 storage
/0/3/0.0.0 /dev/cdrom disk DVD RW AD-7561S
/1 enp0s29u1u1u4 network Ethernet interface
Linux Waly-K73SM 4.15.0-54-generic #58~16.04.1-Ubuntu SMP Mon Jun 24 13:21:41 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] found SMP MP-table at [mem 0x000fcc50-0x000fcc5f] mapped at [ (ptrval)]
[ 0.000000] No NUMA configuration found
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] Switched APIC routing to physical flat.
[ 0.029891] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.029894] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.052875] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.067802] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.456070] usbcore: registered new interface driver usbfs
[ 0.456082] usbcore: registered new interface driver hub
[ 0.456109] usbcore: registered new device driver usb
[ 0.462758] clocksource: Switched to clocksource hpet
[ 0.529360] pnp: PnP ACPI: found 9 devices
[ 0.800210] pci 0000:04:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[ 1.896552] Console: switching to colour frame buffer device 128x48
[ 1.958389] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.959312] ACPI: Lid Switch [LID]
[ 2.092636] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.117294] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.141881] usb usb1: Product: EHCI Host Controller
[ 2.166314] usb usb1: Manufacturer: Linux 4.15.0-54-generic ehci_hcd
[ 2.190900] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.215623] hub 1-0:1.0: USB hub found
[ 2.404294] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.429096] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.454334] usb usb2: Product: EHCI Host Controller
[ 2.479840] usb usb2: Manufacturer: Linux 4.15.0-54-generic ehci_hcd
[ 2.505450] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.531129] hub 2-0:1.0: USB hub found
[ 2.600037] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.900255] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.900257] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.900577] hub 1-1:1.0: USB hub found
[ 2.936027] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 3.092445] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.092447] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.092720] hub 2-1:1.0: USB hub found
[ 3.188027] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[ 3.380032] usb 2-1.2: new full-speed USB device number 3 using ehci-pci
[ 3.444775] usb 1-1.4: New USB device found, idVendor=058f, idProduct=6366
[ 3.444777] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.444778] usb 1-1.4: Product: Mass Storage Device
[ 3.444779] usb 1-1.4: Manufacturer: Generic
[ 3.444780] usb 1-1.4: SerialNumber: 058F63666433
[ 3.592394] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c539
[ 3.592395] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.592396] usb 2-1.2: Product: USB Receiver
[ 3.592397] usb 2-1.2: Manufacturer: Logitech
[ 3.672023] usb 2-1.3: new full-speed USB device number 4 using ehci-pci
[ 3.735258] RAS: Correctable Errors collector initialized.
[ 3.799029] usb 2-1.3: New USB device found, idVendor=0a12, idProduct=0001
[ 3.799031] usb 2-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.799032] usb 2-1.3: Product: CSR8510 A10
[ 3.891746] clocksource: Switched to clocksource tsc
[ 4.047929] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 4.157465] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.295795] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 4.339526] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 4.510158] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 4.520787] scsi host0: usb-storage 1-1.4:1.0
[ 4.520915] usbcore: registered new interface driver usb-storage
[ 4.609796] atl1c 0000:04:00.0 enp4s0: renamed from eth0
[ 4.828813] usbcore: registered new interface driver uas
[ 5.059865] usbcore: registered new interface driver usbhid
[ 5.059865] usbhid: USB HID core driver
[ 5.379404] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C539.0001/input/input12
[ 5.452097] hid-generic 0003:046D:C539.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0
[ 5.452299] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C539.0002/input/input13
[ 5.524204] hid-generic 0003:046D:C539.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1
[ 5.524375] hid-generic 0003:046D:C539.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2
[ 5.788618] fb: switching to inteldrmfb from VESA VGA
[ 6.189355] Console: switching to colour dummy device 80x25
[ 7.077186] Console: switching to colour frame buffer device 200x56
[ 7.989118] lp: driver loaded but no devices found
[ 8.010337] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 8.209691] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.250438] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 8.258114] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.362514] ACPI Warning: \_SB.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
[ 8.400873] intel_rapl: Found RAPL domain package
[ 8.400876] intel_rapl: Found RAPL domain core
[ 8.400877] intel_rapl: Found RAPL domain uncore
[ 8.402563] ath: phy0: Disable PLL PowerSave
[ 8.407171] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 8.408178] usbcore: registered new interface driver btusb
[ 8.409481] ath: phy0: Enable LNA combining
[ 8.410834] ath: phy0: ASPM enabled: 0x42
[ 8.410838] ath: EEPROM regdomain: 0x60
[ 8.410839] ath: EEPROM indicates we should expect a direct regpair map
[ 8.410841] ath: Country alpha2 being used: 00
[ 8.410842] ath: Regpair used: 0x60
[ 8.420085] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.420747] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffa0a241900000, irq=17
[ 8.452573] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 8.452676] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 8.452774] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 8.455024] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[ 9.759979] audit: type=1400 audit(1563380648.115:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=971 comm="apparmor_parser"
[ 9.985384] bbswitch: version 0.8
[ 9.985394] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 9.985401] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.GFX0
[ 9.985626] bbswitch: detected an Optimus _DSM function
[ 9.985633] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 10.086700] vboxdrv: Found 8 processor cores
[ 10.244175] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 10.258915] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 10.324375] vboxpci: IOMMU not found (not registered)
[ 10.372370] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 14.235690] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 14.250180] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 14.308800] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 14.384847] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 14.460499] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 15.596661] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 15.618017] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 15.620529] wlp3s0: authenticated
[ 15.628046] wlp3s0: associate with b8:26:6c:ff:68:16 (try 1/3)
[ 15.695406] wlp3s0: associate with b8:26:6c:ff:68:16 (try 2/3)
[ 15.737627] wlp3s0: RX AssocResp from b8:26:6c:ff:68:16 (capab=0x431 status=0 aid=2)
[ 15.737768] wlp3s0: associated
[ 15.737898] ath: EEPROM regdomain: 0x80fa
[ 15.737899] ath: EEPROM indicates we should expect a country code
[ 15.737899] ath: doing EEPROM country->regdmn map search
[ 15.737900] ath: country maps to regdmn code: 0x37
[ 15.737901] ath: Country alpha2 being used: FR
[ 15.737902] ath: Regpair used: 0x37
[ 15.737904] ath: regdomain 0x80fa dynamically updated by country IE
[ 17.781330] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 21.796326] wlp3s0: disassociated from b8:26:6c:ff:68:16 (Reason: 2=PREV_AUTH_NOT_VALID)
[ 23.048630] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 23.069539] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 23.071987] wlp3s0: authenticated
[ 23.076124] wlp3s0: associate with b8:26:6c:ff:68:16 (try 1/3)
[ 23.082871] wlp3s0: RX AssocResp from b8:26:6c:ff:68:16 (capab=0x431 status=0 aid=2)
[ 23.083016] wlp3s0: associated
[ 23.083115] ath: EEPROM regdomain: 0x80fa
[ 23.083116] ath: EEPROM indicates we should expect a country code
[ 23.083117] ath: doing EEPROM country->regdmn map search
[ 23.083118] ath: country maps to regdmn code: 0x37
[ 23.083119] ath: Country alpha2 being used: FR
[ 23.083120] ath: Regpair used: 0x37
[ 23.083121] ath: regdomain 0x80fa dynamically updated by country IE
[ 43.520629] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 43.541648] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 43.544225] wlp3s0: authenticated
[ 43.548069] wlp3s0: associate with b8:26:6c:ff:68:16 (try 1/3)
[ 43.625290] wlp3s0: RX AssocResp from b8:26:6c:ff:68:16 (capab=0x431 status=0 aid=2)
[ 43.625416] wlp3s0: associated
[ 43.625498] ath: EEPROM regdomain: 0x80fa
[ 43.625499] ath: EEPROM indicates we should expect a country code
[ 43.625500] ath: doing EEPROM country->regdmn map search
[ 43.625501] ath: country maps to regdmn code: 0x37
[ 43.625502] ath: Country alpha2 being used: FR
[ 43.625503] ath: Regpair used: 0x37
[ 43.625504] ath: regdomain 0x80fa dynamically updated by country IE
[ 147.482147] usb 2-1.1: new high-speed USB device number 5 using ehci-pci
[ 147.593183] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=0306
[ 147.593195] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 147.593203] usb 2-1.1: Product: ZTE USB Device
[ 147.593211] usb 2-1.1: Manufacturer: ZTE Incorporated
[ 147.593217] usb 2-1.1: SerialNumber: 972de05
[ 160.829492] usb 2-1.1: USB disconnect, device number 5
[ 161.056506] usb 2-1.1: new high-speed USB device number 6 using ehci-pci
[ 161.166911] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1373
[ 161.166916] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 161.166920] usb 2-1.1: Product: ZTE USB Device
[ 161.166923] usb 2-1.1: Manufacturer: ZTE Incorporated
[ 161.166926] usb 2-1.1: SerialNumber: 972de05
[ 161.204853] usbcore: registered new interface driver cdc_ether
[ 161.209741] rndis_host 2-1.1:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.0-1.1, RNDIS device, b2:a8:ec:46:c2:82
[ 161.209800] usbcore: registered new interface driver rndis_host
[ 161.214489] rndis_host 2-1.1:1.0 enp0s29u1u1: renamed from usb0
[ 1461.557083] usb 2-1.1: USB disconnect, device number 6
[ 1461.559375] rndis_host 2-1.1:1.0 enp0s29u1u1: unregister 'rndis_host' usb-0000:00:1d.0-1.1, RNDIS device
[ 1463.825412] usb 2-1.1: new high-speed USB device number 7 using ehci-pci
[ 1463.934177] usb 2-1.1: New USB device found, idVendor=1a40, idProduct=0101
[ 1463.934186] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1463.934191] usb 2-1.1: Product: USB 2.0 Hub
[ 1463.934723] hub 2-1.1:1.0: USB hub found
[ 1471.593081] usb 2-1.1.4: new high-speed USB device number 8 using ehci-pci
[ 1471.803229] usb 2-1.1.4: New USB device found, idVendor=19d2, idProduct=0306
[ 1471.803237] usb 2-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1471.803242] usb 2-1.1.4: Product: ZTE USB Device
[ 1471.803247] usb 2-1.1.4: Manufacturer: ZTE Incorporated
[ 1471.803251] usb 2-1.1.4: SerialNumber: 972de05
[ 1481.274531] usb 2-1.1.4: USB disconnect, device number 8
[ 1481.604706] usb 2-1.1.4: new high-speed USB device number 9 using ehci-pci
[ 1481.815230] usb 2-1.1.4: New USB device found, idVendor=19d2, idProduct=1373
[ 1481.815238] usb 2-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1481.815244] usb 2-1.1.4: Product: ZTE USB Device
[ 1481.815248] usb 2-1.1.4: Manufacturer: ZTE Incorporated
[ 1481.815252] usb 2-1.1.4: SerialNumber: 972de05
[ 1481.821256] rndis_host 2-1.1.4:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.0-1.1.4, RNDIS device, be:9d:b8:6c:99:fa
[ 1481.845020] rndis_host 2-1.1.4:1.0 enp0s29u1u1u4: renamed from usb0
[ 1492.348191] usb 2-1.1.3: new high-speed USB device number 10 using ehci-pci
[ 1492.557096] usb 2-1.1.3: New USB device found, idVendor=1000, idProduct=1320
[ 1492.557102] usb 2-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1492.557106] usb 2-1.1.3: Product: Mass storage
[ 1492.557109] usb 2-1.1.3: Manufacturer: Generic
[ 1492.557112] usb 2-1.1.3: SerialNumber: ab2158583980
[ 1492.557843] usb-storage 2-1.1.3:1.0: USB Mass Storage device detected
[ 1492.558579] scsi host7: usb-storage 2-1.1.3:1.0
[ 1529.403123] usb 2-1.1.3: USB disconnect, device number 10
[ 1546.113884] usb 2-1.1.3: new high-speed USB device number 11 using ehci-pci
[ 1546.325614] usb 2-1.1.3: New USB device found, idVendor=6557, idProduct=0921
[ 1546.325620] usb 2-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1546.325624] usb 2-1.1.3: Product: USB DISK 2.0
[ 1546.325627] usb 2-1.1.3: Manufacturer:
[ 1546.325630] usb 2-1.1.3: SerialNumber: 070192D833EA3206
[ 1546.326254] usb-storage 2-1.1.3:1.0: USB Mass Storage device detected
[ 1546.326814] scsi host7: usb-storage 2-1.1.3:1.0
[ 1548.726735] sd 7:0:0:0: [sdd] No Caching mode page found
[ 1733.944859] usb 2-1.1.3: USB disconnect, device number 11
[ 1736.061162] usb 2-1.1.3: new high-speed USB device number 12 using ehci-pci
[ 1736.277648] usb 2-1.1.3: New USB device found, idVendor=6557, idProduct=0921
[ 1736.277655] usb 2-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1736.277659] usb 2-1.1.3: Product: USB DISK 2.0
[ 1736.277663] usb 2-1.1.3: Manufacturer:
[ 1736.277666] usb 2-1.1.3: SerialNumber: 070192D833EA3206
[ 1736.278207] usb-storage 2-1.1.3:1.0: USB Mass Storage device detected
[ 1736.278653] scsi host7: usb-storage 2-1.1.3:1.0
[ 1738.674104] sd 7:0:0:0: [sdd] No Caching mode page found
[ 1838.904706] usb 2-1.1.3: USB disconnect, device number 12
[ 1851.003877] usb 2-1.1.1: new high-speed USB device number 13 using ehci-pci
[ 1851.212829] usb 2-1.1.1: New USB device found, idVendor=1000, idProduct=1320
[ 1851.212837] usb 2-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1851.212842] usb 2-1.1.1: Product: Mass storage
[ 1851.212847] usb 2-1.1.1: Manufacturer: Generic
[ 1851.212851] usb 2-1.1.1: SerialNumber: ab2158583980
[ 1851.213432] usb-storage 2-1.1.1:1.0: USB Mass Storage device detected
[ 1851.213716] scsi host7: usb-storage 2-1.1.1:1.0
[ 2609.539540] wlp3s0: disassociated from b8:26:6c:ff:68:16 (Reason: 2=PREV_AUTH_NOT_VALID)
[ 2610.795312] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 2610.814548] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 2611.288822] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 2611.691743] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 2612.248107] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 2613.790366] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 2613.810275] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 2614.428354] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 2614.788664] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 2615.067654] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 2617.113803] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 2617.134340] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 2617.361582] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 2617.368549] wlp3s0: authenticated
[ 2617.372460] wlp3s0: associate with b8:26:6c:ff:68:16 (try 1/3)
[ 2617.562573] wlp3s0: associate with b8:26:6c:ff:68:16 (try 2/3)
[ 2618.727396] wlp3s0: associate with b8:26:6c:ff:68:16 (try 3/3)
[ 2619.162480] wlp3s0: association with b8:26:6c:ff:68:16 timed out
[ 2625.109267] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2625.204759] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 2625.225808] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 2625.687254] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 2625.836056] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 2626.257941] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 2637.316791] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 2637.337098] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 2637.911560] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 2638.013003] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 2638.607925] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 2650.096261] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2651.119637] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 2651.140698] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 2651.862832] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 2652.573505] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 2653.119606] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 2664.163049] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 2664.185406] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 2664.515481] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 2664.878238] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 2665.060250] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 2675.094633] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2677.126800] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 2677.147489] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 2677.562869] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 2677.989717] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 2678.869661] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 2695.953390] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 2695.974452] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 2696.325727] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 2696.723218] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 2697.273003] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 2700.094736] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3001.193757] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 3001.214724] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 3001.908851] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 3002.113028] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 3002.676040] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 3025.163320] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3026.822434] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 3026.836817] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 3027.762564] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 3028.783101] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 3029.636403] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 3040.690981] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 3040.711193] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 3041.404041] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 3041.917604] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 3042.404782] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 3052.168339] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3053.181217] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 3053.201635] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 3053.632614] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 3053.936700] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 3054.284044] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 3065.344582] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 3065.364822] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 3065.954972] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 3066.499208] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 3067.147548] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 3077.173520] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3079.210626] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 3079.231768] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 3079.261506] wlp3s0: authenticated
[ 3079.269985] wlp3s0: associate with b8:26:6c:ff:68:16 (try 1/3)
[ 3079.906670] wlp3s0: associate with b8:26:6c:ff:68:16 (try 2/3)
[ 3080.437732] wlp3s0: associate with b8:26:6c:ff:68:16 (try 3/3)
[ 3081.538873] wlp3s0: association with b8:26:6c:ff:68:16 timed out
[ 3092.606622] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 3092.626759] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 3093.677147] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 3094.654513] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 3094.747182] wlp3s0: authenticated
[ 3094.749532] wlp3s0: associate with b8:26:6c:ff:68:16 (try 1/3)
[ 3095.664915] wlp3s0: associate with b8:26:6c:ff:68:16 (try 2/3)
[ 3096.269625] wlp3s0: associate with b8:26:6c:ff:68:16 (try 3/3)
[ 3096.937998] wlp3s0: association with b8:26:6c:ff:68:16 timed out
[ 3109.237462] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 3109.258702] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 3109.911562] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 3110.829114] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 3111.399980] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 3127.185663] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3428.202999] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 3428.223548] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 3428.891350] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 3428.965390] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 3429.031544] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 3440.078625] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 3440.099404] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 3440.488201] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 3440.915630] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 3441.457222] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 3452.143789] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3452.495342] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 3452.516303] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 3452.908005] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 3453.160065] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 3453.638365] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 3464.689556] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 3464.709738] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 3465.743479] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 3466.542297] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 3466.952170] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 3477.146181] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3485.208740] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 3485.229362] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 3485.424325] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 3485.694995] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 3485.950515] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 3502.151858] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3503.048911] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 3503.069329] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 3503.761576] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 3504.130532] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 3504.437252] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 3515.491564] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 3515.512346] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 3516.524541] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 3516.968920] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 3517.256375] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 3527.158297] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3828.148762] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 3828.169610] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 3828.172372] wlp3s0: authenticated
[ 3828.175984] wlp3s0: associate with b8:26:6c:ff:68:16 (try 1/3)
[ 3828.181219] wlp3s0: RX AssocResp from b8:26:6c:ff:68:16 (capab=0x431 status=0 aid=2)
[ 3828.181353] wlp3s0: associated
[ 3828.181467] ath: EEPROM regdomain: 0x80fa
[ 3828.181468] ath: EEPROM indicates we should expect a country code
[ 3828.181469] ath: doing EEPROM country->regdmn map search
[ 3828.181470] ath: country maps to regdmn code: 0x37
[ 3828.181472] ath: Country alpha2 being used: FR
[ 3828.181473] ath: Regpair used: 0x37
[ 3828.181475] ath: regdomain 0x80fa dynamically updated by country IE
[ 3828.196097] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 4625.634758] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 4625.655262] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 4625.944423] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 4626.364505] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 4626.855315] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 4628.401731] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 4628.422702] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 4628.475527] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 4628.521808] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 4628.577570] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 4630.618344] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 4630.639565] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 4630.642215] wlp3s0: authenticated
[ 4630.644972] wlp3s0: associate with b8:26:6c:ff:68:16 (try 1/3)
[ 4630.706442] wlp3s0: associate with b8:26:6c:ff:68:16 (try 2/3)
[ 4630.780717] wlp3s0: associate with b8:26:6c:ff:68:16 (try 3/3)
[ 4630.868876] wlp3s0: association with b8:26:6c:ff:68:16 timed out
[ 4634.119976] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 4646.349749] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 4646.370774] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 4647.516739] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 4647.925216] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 4648.138050] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 4659.107855] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 4667.176824] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 4667.200084] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 4667.245882] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 4667.318912] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 4667.384645] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 4684.107231] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 4684.448472] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 4684.469164] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 4684.515936] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 4684.597758] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 4684.635604] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 4695.688182] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 4695.708810] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 4696.153710] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 4696.643083] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 4697.011511] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 4709.107416] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 5034.110554] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 5568.155539] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 5568.169862] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 5568.612000] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 2/3)
[ 5569.014125] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 3/3)
[ 5569.585557] wlp3s0: authentication with b8:26:6c:ff:68:16 timed out
[ 5580.641830] wlp3s0: authenticate with b8:26:6c:ff:68:16
[ 5580.662599] wlp3s0: send auth to b8:26:6c:ff:68:16 (try 1/3)
[ 5580.700449] wlp3s0: authenticated
[ 5580.700970] wlp3s0: associate with b8:26:6c:ff:68:16 (try 1/3)
[ 5580.952663] wlp3s0: associate with b8:26:6c:ff:68:16 (try 2/3)
[ 5581.573596] wlp3s0: RX AssocResp from b8:26:6c:ff:68:16 (capab=0x431 status=0 aid=2)
[ 5581.573728] wlp3s0: associated
[ 5581.573811] ath: EEPROM regdomain: 0x80fa
[ 5581.573812] ath: EEPROM indicates we should expect a country code
[ 5581.573813] ath: doing EEPROM country->regdmn map search
[ 5581.573814] ath: country maps to regdmn code: 0x37
[ 5581.573815] ath: Country alpha2 being used: FR
[ 5581.573815] ath: Regpair used: 0x37
[ 5581.573817] ath: regdomain 0x80fa dynamically updated by country IE
[ 5581.585697] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
 Release Date: 06/20/2012
  Serial services are supported (int 14h)
 Manufacturer: ASUSTeK Computer Inc.
 Product Name: K73SD
 Serial Number: BSN12345678901234567
 Manufacturer: ASUSTeK Computer Inc.
 Serial Number: CSN12345678901234567
 Manufacturer: Intel
 Serial Number: To Be Filled By O.E.M.
 External Reference Designator: Serial Port
 Port Type: Serial Port 16550A Compatible
 Manufacturer: ASUSTeK Computer Inc.
 Product Name: K73SD
 Serial Number: SSN12345678901234567
 Manufacturer: Samsung
 Serial Number: 12AB78E2
 Manufacturer: [Empty]
 Serial Number: [Empty]
 Manufacturer: Elpida
 Serial Number: 8C6517EC
 Manufacturer: [Empty]
 Serial Number: [Empty]
enp0s29u1u1u4 no wireless extensions.

enp4s0 no wireless extensions.

lo no wireless extensions.

wlp3s0 IEEE 802.11 ESSID:"Livebox-6816"
          Mode:Managed Frequency:2.462 GHz Access Point: B8:26:6C:FF:68:16
          Bit Rate=1 Mb/s Tx-Power=15 dBm
          Retry short limit:7 RTS thr:off Fragment thr:off
          Power Management:off
          Link Quality=51/70 Signal level=-59 dBm
          Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
          Tx excessive retries:297 Invalid misc:37 Missed beacon:0

/etc/modprobe.d/alsa-base.conf:install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
/etc/modprobe.d/ar9485.conf:options ar9485 swenc=1 fwlps=0 ips=0 ant_sel=2
/etc/modprobe.d/blacklist-ath_pci.conf:# which ath5k cannot recover. To prevent this condition, stop
/etc/modprobe.d/blacklist-ath_pci.conf:blacklist ath_pci
/etc/modprobe.d/blacklist-bcm43.conf:# Warning: This file is autogenerated by bcmwl. All changes to this file will be lost.
/etc/modprobe.d/blacklist-bcm43.conf:blacklist b43
/etc/modprobe.d/blacklist-bcm43.conf:blacklist b43legacy
/etc/modprobe.d/blacklist-bcm43.conf:blacklist bcm43xx
/etc/modprobe.d/blacklist-bcm43.conf:blacklist brcm80211
/etc/modprobe.d/blacklist-bcm43.conf:blacklist brcmfmac
/etc/modprobe.d/blacklist-bcm43.conf:blacklist brcmsmac
/etc/modprobe.d/blacklist-bcm43.conf:blacklist bcma
/etc/modprobe.d/blacklist.conf:blacklist eth1394
/etc/modprobe.d/blacklist.conf:# replaced by p54pci
/etc/modprobe.d/blacklist.conf:blacklist prism54
/etc/modprobe.d/blacklist.conf:# replaced by b43 and ssb.
/etc/modprobe.d/blacklist.conf:blacklist bcm43xx
/etc/modprobe.d/blacklist-oss.conf:blacklist uart6850
/etc/modprobe.d/blacklist-watchdog.conf:blacklist twl4030_wdt
/etc/modprobe.d/iwlwifi.conf:# /etc/modprobe.d/iwlwifi.conf
/etc/modprobe.d/iwlwifi.conf:# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the
/etc/modprobe.d/iwlwifi.conf:# microcode file installed on the system. When removing iwlwifi, first
/etc/modprobe.d/iwlwifi.conf:# remove the iwl?vm module and then iwlwifi.
/etc/modprobe.d/iwlwifi.conf:remove iwlwifi \
/etc/modprobe.d/iwlwifi.conf:(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
/etc/modprobe.d/iwlwifi.conf:&& /sbin/modprobe -r mac80211
/etc/modprobe.d/iwlwifi.conf:options iwlwifi bt_coex_active=0
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
07: PCI 300.0: 0282 WLAN controller
  [Created at pci.366]
  Unique ID: hAO_.H4GwaK8_Uo4
  Parent ID: qTvu.3vCxleOm2rF
  SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:03:00.0
  SysFS BusID: 0000:03:00.0
  Hardware Class: network
  Model: "Qualcomm Atheros AR9485 Wireless Network Adapter"
  Vendor: pci 0x168c "Qualcomm Atheros"
  Device: pci 0x0032 "AR9485 Wireless Network Adapter"
  SubVendor: pci 0x1a3b "AzureWave"
  SubDevice: pci 0x1186
  Revision: 0x01
  Driver: "ath9k"
  Driver Modules: "ath9k", "ath9k"
  Device File: wlp3s0
  Features: WLAN
  Memory Range: 0xde200000-0xde27ffff (rw,non-prefetchable)
  Memory Range: 0xde280000-0xde28ffff (ro,non-prefetchable,disabled)
  IRQ: 17 (193289 events)
  HW Address: 00:08:ca:71:3b:ab
  Link detected: yes
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
  WLAN encryption modes: WEP40 WEP104 TKIP CCMP
  WLAN authentication modes: open sharedkey wpa-psk wpa-eap
  Module Alias: "pci:v0000168Cd00000032sv00001A3Bsd00001186bc02sc80i00"
  Driver Info #0:
    Driver Status: ath9k is active
    Driver Activation Cmd: "modprobe ath9k"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #18 (PCI bridge)

21: PCI 400.0: 0200 Ethernet controller
  [Created at pci.366]
  Unique ID: Ljo_.VPVWDTPfG+9
  Parent ID: HnsE.BDmwb8hdGU1
  SysFS ID: /devices/pci0000:00/0000:00:1c.5/0000:04:00.0
  SysFS BusID: 0000:04:00.0
  Hardware Class: network
  Model: "Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet"
  Vendor: pci 0x1969 "Qualcomm Atheros"
  Device: pci 0x1083 "AR8151 v2.0 Gigabit Ethernet"
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x1851
  Revision: 0xc0
  Driver: "atl1c"
  Driver Modules: "atl1c"
  Device File: enp4s0
  Memory Range: 0xdd800000-0xdd83ffff (rw,non-prefetchable)
  I/O Ports: 0xa000-0xafff (rw)
  IRQ: 33 (1 event)
  HW Address: 08:60:6e:03:69:9b
  Link detected: no
  Module Alias: "pci:v00001969d00001083sv00001043sd00001851bc02sc00i00"
  Driver Info #0:
    Driver Status: atl1c is active
    Driver Activation Cmd: "modprobe atl1c"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #12 (PCI bridge)
root 1040 0.0 0.2 450256 17692 ? Ssl 18:24 0:04 /usr/sbin/NetworkManager --no-daemon
root 1323 0.0 0.0 44036 6764 ? Ss 18:24 0:02 /sbin/wpa_supplicant -u -s -O /run/wpa_supplicant
root 6430 0.0 0.0 16132 3708 ? S 18:48 0:00 /sbin/dhclient -d -q -sf /usr/lib/NetworkManager/nm-dhcp-helper -pf /var/run/dhclient-enp0s29u1u1u4.pid -lf /var/lib/NetworkManager/dhclient-bf2c7e2f-6236-38cb-a5c8-f8fd20969425-enp0s29u1u1u4.lease -cf /var/lib/NetworkManager/dhclient-enp0s29u1u1u4.conf enp0s29u1u1u4
aly 6487 0.0 0.0 353348 7132 ? Sl 18:26 0:00 /usr/lib/gvfs/gvfsd-network --spawner :1.5 /org/gtk/gvfs/exec_spaw/2
aly 24298 0.0 0.0 14268 928 pts/2 S+ 20:22 0:00 grep --color=auto -E wpa|icd|etwork
Table de routage IP du noyau
Destination Passerelle Genmask Indic MSS Fenêtre irtt Iface
0.0.0.0 192.168.42.129 0.0.0.0 UG 0 0 0 enp0s29u1u1u4
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 enp0s29u1u1u4
192.168.42.0 0.0.0.0 255.255.255.0 U 0 0 0 enp0s29u1u1u4
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 192.168.42.129
nameserver fe80::ba26:6cff:feff:6816%wlp3s0
search home
total 151608
786433 drwxr-xr-x 3 root root 4096 juil. 17 19:10 .
     2 drwxr-xr-x 25 root root 4096 juin 29 17:42 ..
790052 -rw-r--r-- 1 root root 217286 juin 6 15:27 config-4.15.0-52-generic
786458 -rw-r--r-- 1 root root 217286 juin 24 16:45 config-4.15.0-54-generic
786434 drwxr-xr-x 5 root root 4096 juil. 15 09:33 grub
790054 -rw-r--r-- 1 root root 64918823 juin 22 18:51 initrd.img-4.15.0-52-generic
786457 -rw-r--r-- 1 root root 64915699 juil. 17 19:10 initrd.img-4.15.0-54-generic
786438 -rw-r--r-- 1 root root 182704 janv. 28 2016 memtest86+.bin
786439 -rw-r--r-- 1 root root 184380 janv. 28 2016 memtest86+.elf
786440 -rw-r--r-- 1 root root 184840 janv. 28 2016 memtest86+_multiboot.bin
788771 -rw------- 1 root root 4050825 juin 6 15:27 System.map-4.15.0-52-generic
786456 -rw------- 1 root root 4050903 juin 24 16:45 System.map-4.15.0-54-generic
790053 -rw------- 1 root root 8141080 juin 17 19:19 vmlinuz-4.15.0-52-generic
786459 -rw------- 1 root root 8140856 juin 25 14:23 vmlinuz-4.15.0-54-generic
Résumé de l'état du support de « Waly-K73SM » :

Vous avez 71 paquets (2.4%) pris en charge jusqu'à avril 2021 (Communauté - 5y)
Vous avez 2138 paquets (71.5%) pris en charge jusqu'à avril 2021 (Canonical - 5y)

Vous avez 5 paquets (0.2%) qui ne peuvent pas ou plus être téléchargés
Vous avez 775 paquets (25.9%) qui ne sont pas pris en charge

Exécuter avec --show-unsupported, --show-supported ou --show-all pour voir plus de détails
Downloaded daily snapshot dated 2019-06-30 03:15:01
--2019-07-17 20:22:09-- http://www.linux-usb.org/usb.ids
Résolution de www.linux-usb.org (www.linux-usb.org)… 216.105.38.10
Connexion à www.linux-usb.org (www.linux-usb.org)|216.105.38.10|:80… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 610771 (596K) [text/plain]
Enregistre : «/var/lib/usbutils/usb.ids.new»

/var/lib/usbutils/usb.ids.new 100%[==================================================>] 596,46K 273KB/s ds 2,2s

2019-07-17 20:22:11 (273 KB/s) - «/var/lib/usbutils/usb.ids.new» enregistré [610771/610771]

Done.
Module Size Used by
nls_iso8859_1 16384 1
rndis_host 16384 0
cdc_ether 16384 1 rndis_host
usbnet 45056 2 rndis_host,cdc_ether
mii 16384 1 usbnet
rfcomm 77824 5
ccm 20480 3
pci_stub 16384 1
vboxpci 24576 0
vboxnetadp 28672 0
vboxnetflt 28672 0
vboxdrv 475136 3 vboxpci,vboxnetadp,vboxnetflt
bbswitch 16384 0
bnep 20480 2
binfmt_misc 20480 1
snd_hda_codec_hdmi 49152 1
snd_hda_codec_realtek 106496 1
asus_nb_wmi 28672 0
asus_wmi 28672 1 asus_nb_wmi
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
sparse_keymap 16384 1 asus_wmi
wmi_bmof 16384 0
mxm_wmi 16384 0
arc4 16384 2
btusb 45056 0
btrtl 16384 1 btusb
intel_rapl 20480 0
snd_hda_intel 40960 3
x86_pkg_temp_thermal 16384 0
btbcm 16384 1 btusb
snd_hda_codec 126976 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
btintel 16384 1 btusb
ath9k 151552 0
intel_powerclamp 16384 0
snd_hda_core 81920 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
coretemp 16384 0
bluetooth 557056 39 btrtl,btintel,btbcm,bnep,btusb,rfcomm
ath9k_common 36864 1 ath9k
snd_hwdep 20480 1 snd_hda_codec
ath9k_hw 475136 2 ath9k_common,ath9k
ecdh_generic 24576 1 bluetooth
snd_pcm 98304 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
kvm_intel 217088 0
ath 28672 3 ath9k_common,ath9k,ath9k_hw
kvm 598016 1 kvm_intel
irqbypass 16384 1 kvm
mac80211 778240 1 ath9k
crct10dif_pclmul 16384 0
crc32_pclmul 16384 0
snd_seq_midi 16384 0
ghash_clmulni_intel 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
cryptd 24576 1 ghash_clmulni_intel
intel_cstate 20480 0
intel_rapl_perf 16384 0
snd_rawmidi 32768 1 snd_seq_midi
nvidia_uvm 757760 0
snd_seq 65536 2 snd_seq_midi,snd_seq_midi_event
joydev 24576 0
input_leds 16384 0
cfg80211 622592 4 ath9k_common,ath9k,ath,mac80211
snd_seq_device 16384 3 snd_seq,snd_seq_midi,snd_rawmidi
snd_timer 32768 2 snd_seq,snd_pcm
snd 81920 17 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm,snd_rawmidi
mei_me 40960 0
mei 90112 1 mei_me
soundcore 16384 1 snd
lpc_ich 24576 0
shpchp 36864 0
serio_raw 16384 0
wmi 24576 3 asus_wmi,wmi_bmof,mxm_wmi
mac_hid 16384 0
parport_pc 36864 0
sunrpc 335872 1
ppdev 20480 0
lp 20480 0
parport 49152 3 parport_pc,lp,ppdev
autofs4 40960 2
nvidia_drm 40960 2
nvidia_modeset 1114112 3 nvidia_drm
i915 1630208 3
i2c_algo_bit 16384 1 i915
hid_generic 16384 0
drm_kms_helper 172032 2 nvidia_drm,i915
syscopyarea 16384 1 drm_kms_helper
usbhid 49152 0
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
nvidia 14364672 162 nvidia_uvm,nvidia_modeset
uas 24576 0
hid 118784 2 usbhid,hid_generic
ahci 40960 6
ipmi_devintf 20480 0
usb_storage 69632 2 uas
libahci 32768 1 ahci
psmouse 151552 0
drm 401408 6 drm_kms_helper,nvidia_drm,i915
atl1c 49152 0
ipmi_msghandler 53248 2 ipmi_devintf,nvidia
video 45056 2 asus_wmi,i915

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu gnome-nettool Edit question
Assignee:
No assignee Edit question
Solved by:
actionparsnip
Solved:
Last query:
Last reply:
Revision history for this message
Best actionparsnip (andrew-woodhead666) said :
#1

Try:

sudo modprobe -r ath9k; sleep 3; sudo modprobe ath9k nohwcrypt=1

Is the internet access OK then? If so then we can make the config stick

Revision history for this message
Dan (baobab33) said :
#2

well, it seems that the issue is solved by this so simple command line, thank you so much !

Revision history for this message
Dan (baobab33) said :
#3

i'm engraving it :
echo "options ath9k nohwcrypt=1" | sudo tee /etc/modprobe.d/ath9k.conf

Revision history for this message
actionparsnip (andrew-woodhead666) said :
#4

Yeah that's what I was going to suggest if it worked. Glad it worked