TL-WN722N keeps loosing connection to wireless network

Asked by Iain Mellis

My wireless card has to be removed and reinserted every 5 minutes or so. Any clues on how to fix this?

Hit:1 http://gb.archive.ubuntu.com/ubuntu bionic InRelease
Get:2 http://gb.archive.ubuntu.com/ubuntu bionic-updates InRelease [88.7 kB]
Ign:3 http://dl.google.com/linux/chrome/deb stable InRelease
Hit:4 http://dl.google.com/linux/chrome/deb stable Release
Get:5 http://gb.archive.ubuntu.com/ubuntu bionic-security InRelease [83.2 kB]
Get:7 http://gb.archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages [186 kB]
Get:8 http://gb.archive.ubuntu.com/ubuntu bionic-updates/main i386 Packages [168 kB]
Get:9 http://gb.archive.ubuntu.com/ubuntu bionic-updates/main amd64 DEP-11 Metadata [127 kB]
Get:10 http://gb.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 48x48 Icons [28.4 kB]
Get:11 http://gb.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 64x64 Icons [49.3 kB]
Get:12 http://gb.archive.ubuntu.com/ubuntu bionic-updates/universe i386 Packages [119 kB]
Get:13 http://gb.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages [119 kB]
Get:14 http://gb.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 DEP-11 Metadata [124 kB]
Get:15 http://gb.archive.ubuntu.com/ubuntu bionic-updates/universe DEP-11 48x48 Icons [124 kB]
Get:16 http://gb.archive.ubuntu.com/ubuntu bionic-updates/universe DEP-11 64x64 Icons [205 kB]
Get:17 http://gb.archive.ubuntu.com/ubuntu bionic-updates/multiverse amd64 DEP-11 Metadata [2,464 B]
Get:18 http://gb.archive.ubuntu.com/ubuntu bionic-security/main amd64 DEP-11 Metadata [204 B]
Get:19 http://gb.archive.ubuntu.com/ubuntu bionic-security/universe amd64 DEP-11 Metadata [2,452 B]
Fetched 1,426 kB in 1s (2,131 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version (3.1-2).
pciutils is already the newest version (1:3.5.2-1ubuntu1).
usbutils is already the newest version (1:007-4build1).
hwinfo is already the newest version (21.52-1).
rfkill is already the newest version (2.31.1-0.4ubuntu3.1).
0 to upgrade, 0 to newly install, 0 to remove and 76 not to upgrade.
  *-network
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:04:00.0
       logical name: enp4s0
       version: 06
       serial: f4:6d:04:90:cb:7a
       size: 10Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168e-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       resources: irq:24 ioport:c000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff
  *-network
       description: Wireless interface
       physical id: 3
       bus info: usb@2:1.7.2
       logical name: wlxf81a6721bb82
       serial: f8:1a:67:21:bb:82
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=ath9k_htc driverversion=4.15.0-23-generic firmware=1.4 ip=192.168.1.11 link=yes multicast=yes wireless=IEEE 802.11
13: phy13: Wireless LAN
 Soft blocked: no
 Hard blocked: no
lo Interface doesn't support scanning.

enp4s0 Interface doesn't support scanning.

                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    ESSID:"TALKTALKCE8C7D"
                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    ESSID:"DIRECT-0E-HP OfficeJet Pro 7720"
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.04
DISTRIB_CODENAME=bionic
DISTRIB_DESCRIPTION="Ubuntu 18.04 LTS"
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
 Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards [1043:8432]
 Kernel driver in use: r8169
Bus 002 Device 048: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 002 Device 047: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n
Bus 002 Device 046: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 002 Device 024: ID 05e3:0716 Genesys Logic, Inc. USB 2.0 Multislot Card Reader/Writer
Bus 002 Device 004: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 002 Device 003: ID 03f0:8f11 Hewlett-Packard
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Error: argument 'nm' not understood. Try passing --help instead.
H/W path Device Class Description
========================================================================
                                              system System Product Name
/0 bus P8P67-M PRO
/0/0 memory 64KiB BIOS
/0/4 processor Intel(R) Core(TM) i
/0/4/5 memory 256KiB L1 cache
/0/4/6 memory 1MiB L2 cache
/0/4/7 memory 6MiB L3 cache
/0/5e memory 8GiB System Memory
/0/5e/0 memory DIMMProject-Id-Vers
/0/5e/1 memory 8GiB DIMM DDR3 Sync
/0/5e/2 memory DIMMProject-Id-Vers
/0/5e/3 memory DIMMProject-Id-Vers
/0/100 bridge 2nd Generation Core
/0/100/1 bridge Xeon E3-1200/2nd Ge
/0/100/1/0 display Redwood XT GL [Fire
/0/100/1/0.1 multimedia Redwood HDMI Audio
/0/100/16 communication 6 Series/C200 Serie
/0/100/1a bus 6 Series/C200 Serie
/0/100/1a/1 usb1 bus EHCI Host Controlle
/0/100/1a/1/1 bus Integrated Rate Mat
/0/100/1b multimedia 6 Series/C200 Serie
/0/100/1c bridge 6 Series/C200 Serie
/0/100/1c.4 bridge 6 Series/C200 Serie
/0/100/1c.4/0 bus VT6315 Series Firew
/0/100/1c.5 bridge 6 Series/C200 Serie
/0/100/1c.5/0 enp4s0 network RTL8111/8168/8411 P
/0/100/1c.6 bridge 6 Series/C200 Serie
/0/100/1c.6/0 storage 88SE912x SATA 6Gb/s
/0/100/1c.7 bridge 6 Series/C200 Serie
/0/100/1d bus 6 Series/C200 Serie
/0/100/1d/1 usb2 bus EHCI Host Controlle
/0/100/1d/1/1 bus Integrated Rate Mat
/0/100/1d/1/1/5 scsi8 printer Photosmart Prem C31
/0/100/1d/1/1/5/0.0.0 /dev/sdb disk Photosmart Prem
/0/100/1d/1/1/5/0.0.0/0 /dev/sdb disk
/0/100/1d/1/1/6 bus USB2.0 Hub
/0/100/1d/1/1/6/1 scsi9 storage USB Storage
/0/100/1d/1/1/6/1/0.0.0 /dev/sdc disk STORAGE DEVICE-A
/0/100/1d/1/1/6/1/0.0.0/0 /dev/sdc disk
/0/100/1d/1/1/6/1/0.0.1 /dev/sdd disk STORAGE DEVICE-A
/0/100/1d/1/1/6/1/0.0.1/0 /dev/sdd disk
/0/100/1d/1/1/6/1/0.0.2 /dev/sde disk 2006MB STORAGE DEVI
/0/100/1d/1/1/6/1/0.0.2/0 /dev/sde disk 2006MB
/0/100/1d/1/1/6/1/0.0.2/0/1 /dev/sde1 volume 1913MiB Windows FAT
/0/100/1d/1/1/6/1/0.0.3 /dev/sdf disk STORAGE DEVICE-A
/0/100/1d/1/1/6/1/0.0.3/0 /dev/sdf disk
/0/100/1d/1/1/7 bus USB2.0 Hub
/0/100/1d/1/1/7/2 generic USB2.0 WLAN
/0/100/1d/1/1/7/4 input USB Receiver
/0/100/1f bridge P67 Express Chipset
/0/100/1f.2 storage 6 Series/C200 Serie
/0/100/1f.3 bus 6 Series/C200 Serie
/0/1 scsi1 storage
/0/1/0.0.0 /dev/cdrom disk DVDRAM GH24NS95
/0/2 scsi7 storage
/0/2/0.0.0 /dev/sda disk 1TB ST1000DM003-1CH
/0/2/0.0.0/0 /dev/sda disk 1TB
/0/2/0.0.0/0/1 volume 511MiB Windows FAT
/0/2/0.0.0/0/2 /dev/sda2 volume 488MiB EXT4 volume
/0/2/0.0.0/0/3 /dev/sda3 volume 930GiB EFI partitio
/1 power To Be Filled By O.E
/2 power To Be Filled By O.E
/3 wlxf81a6721bb82 network Wireless interface
Linux mellis-no-consultingroom1 4.15.0-23-generic #25-Ubuntu SMP Wed May 23 18:02:16 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] found SMP MP-table at [mem 0x000fccc0-0x000fcccf] mapped at [ (ptrval)]
[ 0.000000] No NUMA configuration found
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.032676] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.046368] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.117681] usbcore: registered new interface driver usbfs
[ 0.117681] usbcore: registered new interface driver hub
[ 0.117681] usbcore: registered new device driver usb
[ 0.168001] clocksource: Switched to clocksource hpet
[ 0.178004] pnp: PnP ACPI: found 10 devices
[ 1.112905] Console: switching to colour frame buffer device 100x37
[ 1.156130] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.156132] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.156133] usb usb1: Product: EHCI Host Controller
[ 1.156134] usb usb1: Manufacturer: Linux 4.15.0-23-generic ehci_hcd
[ 1.156135] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.156288] hub 1-0:1.0: USB hub found
[ 1.176137] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.176139] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.176140] usb usb2: Product: EHCI Host Controller
[ 1.176141] usb usb2: Manufacturer: Linux 4.15.0-23-generic ehci_hcd
[ 1.176142] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.176282] hub 2-0:1.0: USB hub found
[ 1.229548] RAS: Correctable Errors collector initialized.
[ 1.256272] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.256674] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.288961] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.293811] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.359592] r8169 0000:04:00.0 eth0: RTL8168e/8111e at 0x00000000698b8ecb, f4:6d:04:90:cb:7a, XID 0c200000 IRQ 24
[ 1.359593] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.389251] r8169 0000:04:00.0 enp4s0: renamed from eth0
[ 1.393016] fb: switching to radeondrmfb from EFI VGA
[ 1.393032] Console: switching to colour dummy device 80x25
[ 1.512012] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.512014] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.668431] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.668433] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.668455] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.668457] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.668695] hub 1-1:1.0: USB hub found
[ 1.668698] hub 2-1:1.0: USB hub found
[ 1.697824] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 1.697832] No Local Variables are initialized for Method [_GTF]
[ 1.697833] No Arguments are initialized for method [_GTF]
[ 1.697835] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 1.699429] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
[ 1.699436] No Local Variables are initialized for Method [_GTF]
[ 1.699437] No Arguments are initialized for method [_GTF]
[ 1.699438] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF, AE_NOT_FOUND (20170831/psparse-550)
[ 1.956030] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[ 2.073003] usb 2-1.5: New USB device found, idVendor=03f0, idProduct=8f11
[ 2.073007] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.073009] usb 2-1.5: Product: Photosmart Prem C310 series
[ 2.073012] usb 2-1.5: Manufacturer: HP
[ 2.073014] usb 2-1.5: SerialNumber: CN0AC1211205KM
[ 2.076094] usb-storage 2-1.5:1.3: USB Mass Storage device detected
[ 2.076256] scsi host8: usb-storage 2-1.5:1.3
[ 2.076324] usbcore: registered new interface driver usb-storage
[ 2.077357] usbcore: registered new interface driver uas
[ 2.156027] usb 2-1.6: new high-speed USB device number 4 using ehci-pci
[ 2.265785] usb 2-1.6: New USB device found, idVendor=05e3, idProduct=0608
[ 2.265789] usb 2-1.6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.265791] usb 2-1.6: Product: USB2.0 Hub
[ 2.266295] hub 2-1.6:1.0: USB hub found
[ 2.348033] usb 2-1.7: new high-speed USB device number 5 using ehci-pci
[ 2.457966] usb 2-1.7: New USB device found, idVendor=05e3, idProduct=0608
[ 2.457970] usb 2-1.7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.457972] usb 2-1.7: Product: USB2.0 Hub
[ 2.458437] hub 2-1.7:1.0: USB hub found
[ 2.551825] Console: switching to colour frame buffer device 240x67
[ 2.556030] usb 2-1.6.1: new high-speed USB device number 6 using ehci-pci
[ 2.672171] usb 2-1.6.1: New USB device found, idVendor=05e3, idProduct=0716
[ 2.672173] usb 2-1.6.1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 2.672174] usb 2-1.6.1: Product: USB Storage
[ 2.672175] usb 2-1.6.1: SerialNumber: 000000009727
[ 2.672808] usb-storage 2-1.6.1:1.0: USB Mass Storage device detected
[ 2.672876] scsi host9: usb-storage 2-1.6.1:1.0
[ 2.747982] usb 2-1.7.2: new high-speed USB device number 7 using ehci-pci
[ 2.876900] usb 2-1.7.2: New USB device found, idVendor=0cf3, idProduct=9271
[ 2.876901] usb 2-1.7.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 2.876903] usb 2-1.7.2: Product: USB2.0 WLAN
[ 2.876904] usb 2-1.7.2: Manufacturer: ATHEROS
[ 2.876905] usb 2-1.7.2: SerialNumber: 12345
[ 2.960033] usb 2-1.7.4: new full-speed USB device number 8 using ehci-pci
[ 3.071950] usb 2-1.7.4: New USB device found, idVendor=046d, idProduct=c52f
[ 3.071953] usb 2-1.7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.071956] usb 2-1.7.4: Product: USB Receiver
[ 3.071958] usb 2-1.7.4: Manufacturer: Logitech
[ 3.079900] usbcore: registered new interface driver usbhid
[ 3.079901] usbhid: USB HID core driver
[ 3.081921] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.0/0003:046D:C52F.0001/input/input3
[ 3.082049] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input0
[ 3.082186] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.1/0003:046D:C52F.0002/input/input4
[ 3.140383] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input1
[ 3.168221] clocksource: Switched to clocksource tsc
[ 3.895608] sd 9:0:0:2: [sde] No Caching mode page found
[ 103.678976] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 104.161649] lp: driver loaded but no devices found
[ 113.349323] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 114.021986] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 114.030057] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[ 114.298706] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 114.298922] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 114.489684] intel_rapl: Found RAPL domain package
[ 114.489689] intel_rapl: Found RAPL domain core
[ 114.656308] usb 2-1.7.2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[ 114.656384] usbcore: registered new interface driver ath9k_htc
[ 114.965487] usb 2-1.7.2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 115.217251] ath9k_htc 2-1.7.2:1.0: ath9k_htc: HTC initialized with 33 credits
[ 115.466218] ath9k_htc 2-1.7.2:1.0: ath9k_htc: FW Version: 1.4
[ 115.466219] ath9k_htc 2-1.7.2:1.0: FW RMW support: On
[ 115.466220] ath: EEPROM regdomain: 0x809c
[ 115.466221] ath: EEPROM indicates we should expect a country code
[ 115.466221] ath: doing EEPROM country->regdmn map search
[ 115.466222] ath: country maps to regdmn code: 0x52
[ 115.466222] ath: Country alpha2 being used: CN
[ 115.466223] ath: Regpair used: 0x52
[ 115.978473] ieee80211 phy0: Atheros AR9271 Rev:1
[ 120.470123] ath9k_htc 2-1.7.2:1.0 wlxf81a6721bb82: renamed from wlan0
[ 122.375084] usblp 2-1.5:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x8F11
[ 122.375113] usbcore: registered new interface driver usblp
[ 130.273301] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 130.430209] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 130.617668] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 130.645912] usblp1: removed
[ 130.646654] usblp 2-1.5:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x8F11
[ 131.877330] wlxf81a6721bb82: authenticate with 24:09:95:ce:8c:84
[ 132.082648] wlxf81a6721bb82: send auth to 24:09:95:ce:8c:84 (try 1/3)
[ 132.084453] wlxf81a6721bb82: authenticated
[ 132.091978] wlxf81a6721bb82: associate with 24:09:95:ce:8c:84 (try 1/3)
[ 132.096322] wlxf81a6721bb82: RX AssocResp from 24:09:95:ce:8c:84 (capab=0x411 status=0 aid=3)
[ 132.104156] wlxf81a6721bb82: associated
[ 132.141039] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf81a6721bb82: link becomes ready
[ 482.438828] usb 2-1.7: USB disconnect, device number 5
[ 482.438833] usb 2-1.7.2: USB disconnect, device number 7
[ 482.440952] usb 2-1.7: clear tt 1 (0080) error -71
[ 482.470086] wlxf81a6721bb82: deauthenticating from 24:09:95:ce:8c:84 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 482.482239] ath: phy0: Failed to wakeup in 500us
[ 482.494953] ath: phy0: Failed to wakeup in 500us
[ 482.505046] ath: phy0: Failed to wakeup in 500us
[ 482.566059] usb 2-1.7.2: ath9k_htc: USB layer deinitialized
[ 482.567904] usb 2-1.7.4: USB disconnect, device number 8
[ 484.965951] usb 2-1.7: new high-speed USB device number 9 using ehci-pci
[ 485.075812] usb 2-1.7: New USB device found, idVendor=05e3, idProduct=0608
[ 485.075816] usb 2-1.7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 485.075818] usb 2-1.7: Product: USB2.0 Hub
[ 485.076383] hub 2-1.7:1.0: USB hub found
[ 485.365992] usb 2-1.7.2: new high-speed USB device number 10 using ehci-pci
[ 485.490809] usb 2-1.7.2: New USB device found, idVendor=0cf3, idProduct=9271
[ 485.490813] usb 2-1.7.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 485.490815] usb 2-1.7.2: Product: USB2.0 WLAN
[ 485.490817] usb 2-1.7.2: Manufacturer: ATHEROS
[ 485.490819] usb 2-1.7.2: SerialNumber: 12345
[ 485.491241] usb 2-1.7.2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[ 485.569993] usb 2-1.7.4: new full-speed USB device number 11 using ehci-pci
[ 485.681231] usb 2-1.7.4: New USB device found, idVendor=046d, idProduct=c52f
[ 485.681235] usb 2-1.7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 485.681237] usb 2-1.7.4: Product: USB Receiver
[ 485.681240] usb 2-1.7.4: Manufacturer: Logitech
[ 485.684532] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.0/0003:046D:C52F.0003/input/input7
[ 485.742292] hid-generic 0003:046D:C52F.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input0
[ 485.743977] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.1/0003:046D:C52F.0004/input/input8
[ 485.780380] usb 2-1.7.2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 485.802302] hid-generic 0003:046D:C52F.0004: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input1
[ 486.031174] ath9k_htc 2-1.7.2:1.0: ath9k_htc: HTC initialized with 33 credits
[ 486.280486] ath9k_htc 2-1.7.2:1.0: ath9k_htc: FW Version: 1.4
[ 486.280489] ath9k_htc 2-1.7.2:1.0: FW RMW support: On
[ 486.280492] ath: EEPROM regdomain: 0x809c
[ 486.280492] ath: EEPROM indicates we should expect a country code
[ 486.280494] ath: doing EEPROM country->regdmn map search
[ 486.280495] ath: country maps to regdmn code: 0x52
[ 486.280496] ath: Country alpha2 being used: CN
[ 486.280497] ath: Regpair used: 0x52
[ 486.284302] ieee80211 phy1: Atheros AR9271 Rev:1
[ 486.298284] ath9k_htc 2-1.7.2:1.0 wlxf81a6721bb82: renamed from wlan0
[ 486.330145] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 486.464590] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 486.522834] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 487.728151] wlxf81a6721bb82: authenticate with 24:09:95:ce:8c:84
[ 487.900331] wlxf81a6721bb82: send auth to 24:09:95:ce:8c:84 (try 1/3)
[ 487.902094] wlxf81a6721bb82: authenticated
[ 487.905979] wlxf81a6721bb82: associate with 24:09:95:ce:8c:84 (try 1/3)
[ 487.909743] wlxf81a6721bb82: RX AssocResp from 24:09:95:ce:8c:84 (capab=0x411 status=0 aid=3)
[ 487.916173] wlxf81a6721bb82: associated
[ 487.943141] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf81a6721bb82: link becomes ready
[ 1822.154307] usb 2-1.7: clear tt 1 (00b0) error -71
[ 1822.162153] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.166405] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.170629] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.174881] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.179154] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.179157] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 1822.183382] usb 2-1.7-port4: cannot disable (err = -71)
[ 1822.187680] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.191880] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.196130] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.200379] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.204630] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.204633] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 1822.208878] usb 2-1.7-port4: cannot disable (err = -71)
[ 1822.213254] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.217505] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.221756] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.226005] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.230277] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.230280] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 1822.234504] usb 2-1.7-port4: cannot disable (err = -71)
[ 1822.238753] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.243032] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.247257] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.251504] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.255757] usb 2-1.7-port4: cannot reset (err = -71)
[ 1822.255761] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 1822.260007] usb 2-1.7-port4: cannot disable (err = -71)
[ 1822.264256] usb 2-1.7-port4: cannot disable (err = -71)
[ 1822.333559] usb 2-1.7: USB disconnect, device number 9
[ 1822.333562] usb 2-1.7.2: USB disconnect, device number 10
[ 1822.638072] wlxf81a6721bb82: deauthenticating from 24:09:95:ce:8c:84 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1822.738571] ath: phy1: Chip reset failed
[ 1822.738576] ath: phy1: Unable to reset channel (2412 Mhz) reset status -22
[ 1822.738577] ath: phy1: Unable to set channel
[ 1822.748600] ath: phy1: Failed to wakeup in 500us
[ 1823.202150] usb 2-1.7.2: ath9k_htc: USB layer deinitialized
[ 1823.202304] usb 2-1.7.4: USB disconnect, device number 11
[ 1825.626093] usb 2-1.7: new high-speed USB device number 12 using ehci-pci
[ 1825.736154] usb 2-1.7: New USB device found, idVendor=05e3, idProduct=0608
[ 1825.736158] usb 2-1.7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1825.736161] usb 2-1.7: Product: USB2.0 Hub
[ 1825.736679] hub 2-1.7:1.0: USB hub found
[ 1826.026102] usb 2-1.7.2: new high-speed USB device number 13 using ehci-pci
[ 1826.150980] usb 2-1.7.2: New USB device found, idVendor=0cf3, idProduct=9271
[ 1826.150984] usb 2-1.7.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 1826.150986] usb 2-1.7.2: Product: USB2.0 WLAN
[ 1826.150988] usb 2-1.7.2: Manufacturer: ATHEROS
[ 1826.150991] usb 2-1.7.2: SerialNumber: 12345
[ 1826.151411] usb 2-1.7.2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[ 1826.230149] usb 2-1.7.4: new full-speed USB device number 14 using ehci-pci
[ 1826.341529] usb 2-1.7.4: New USB device found, idVendor=046d, idProduct=c52f
[ 1826.341533] usb 2-1.7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1826.341536] usb 2-1.7.4: Product: USB Receiver
[ 1826.341538] usb 2-1.7.4: Manufacturer: Logitech
[ 1826.344753] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.0/0003:046D:C52F.0005/input/input9
[ 1826.402479] hid-generic 0003:046D:C52F.0005: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input0
[ 1826.404316] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.1/0003:046D:C52F.0006/input/input10
[ 1826.438415] usb 2-1.7.2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 1826.462479] hid-generic 0003:046D:C52F.0006: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input1
[ 1826.689469] ath9k_htc 2-1.7.2:1.0: ath9k_htc: HTC initialized with 33 credits
[ 1826.962404] ath9k_htc 2-1.7.2:1.0: ath9k_htc: FW Version: 1.4
[ 1826.962407] ath9k_htc 2-1.7.2:1.0: FW RMW support: On
[ 1826.962410] ath: EEPROM regdomain: 0x809c
[ 1826.962411] ath: EEPROM indicates we should expect a country code
[ 1826.962412] ath: doing EEPROM country->regdmn map search
[ 1826.962413] ath: country maps to regdmn code: 0x52
[ 1826.962414] ath: Country alpha2 being used: CN
[ 1826.962415] ath: Regpair used: 0x52
[ 1826.966225] ieee80211 phy2: Atheros AR9271 Rev:1
[ 1826.972942] ath9k_htc 2-1.7.2:1.0 wlxf81a6721bb82: renamed from wlan0
[ 1826.998448] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 1827.133028] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 1827.177960] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 1828.361552] wlxf81a6721bb82: authenticate with 24:09:95:ce:8c:84
[ 1828.523526] wlxf81a6721bb82: send auth to 24:09:95:ce:8c:84 (try 1/3)
[ 1828.525409] wlxf81a6721bb82: authenticated
[ 1828.526143] wlxf81a6721bb82: associate with 24:09:95:ce:8c:84 (try 1/3)
[ 1828.529933] wlxf81a6721bb82: RX AssocResp from 24:09:95:ce:8c:84 (capab=0x411 status=0 aid=3)
[ 1828.536843] wlxf81a6721bb82: associated
[ 1829.063682] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf81a6721bb82: link becomes ready
[ 4097.422762] usb 2-1.7: clear tt 1 (00e0) error -71
[ 4097.429010] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.433317] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.437508] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.441758] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.446008] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.446012] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 4097.450260] usb 2-1.7-port4: cannot disable (err = -71)
[ 4097.454509] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.458760] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.463008] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.467259] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.471511] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.471514] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 4097.475759] usb 2-1.7-port4: cannot disable (err = -71)
[ 4097.480010] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.484258] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.488509] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.492758] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.497008] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.497012] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 4097.501256] usb 2-1.7-port4: cannot disable (err = -71)
[ 4097.505508] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.509758] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.514008] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.518258] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.522508] usb 2-1.7-port4: cannot reset (err = -71)
[ 4097.522511] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 4097.526759] usb 2-1.7-port4: cannot disable (err = -71)
[ 4097.531010] usb 2-1.7-port4: cannot disable (err = -71)
[ 4097.645883] usb 2-1.7: USB disconnect, device number 12
[ 4097.645886] usb 2-1.7.2: USB disconnect, device number 13
[ 4097.669008] wlxf81a6721bb82: deauthenticating from 24:09:95:ce:8c:84 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4097.872561] ath: phy2: Failed to wakeup in 500us
[ 4097.882831] ath: phy2: Failed to wakeup in 500us
[ 4097.892827] ath: phy2: Failed to wakeup in 500us
[ 4097.969072] usb 2-1.7.2: ath9k_htc: USB layer deinitialized
[ 4097.970503] usb 2-1.7.4: USB disconnect, device number 14
[ 4099.661018] usb 2-1.7: new high-speed USB device number 15 using ehci-pci
[ 4099.770794] usb 2-1.7: New USB device found, idVendor=05e3, idProduct=0608
[ 4099.770798] usb 2-1.7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4099.770801] usb 2-1.7: Product: USB2.0 Hub
[ 4099.771319] hub 2-1.7:1.0: USB hub found
[ 4100.061010] usb 2-1.7.2: new high-speed USB device number 16 using ehci-pci
[ 4100.185869] usb 2-1.7.2: New USB device found, idVendor=0cf3, idProduct=9271
[ 4100.185873] usb 2-1.7.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 4100.185876] usb 2-1.7.2: Product: USB2.0 WLAN
[ 4100.185878] usb 2-1.7.2: Manufacturer: ATHEROS
[ 4100.185880] usb 2-1.7.2: SerialNumber: 12345
[ 4100.186297] usb 2-1.7.2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[ 4100.265028] usb 2-1.7.4: new full-speed USB device number 17 using ehci-pci
[ 4100.376402] usb 2-1.7.4: New USB device found, idVendor=046d, idProduct=c52f
[ 4100.376406] usb 2-1.7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4100.376409] usb 2-1.7.4: Product: USB Receiver
[ 4100.376411] usb 2-1.7.4: Manufacturer: Logitech
[ 4100.378753] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.0/0003:046D:C52F.0007/input/input11
[ 4100.437306] hid-generic 0003:046D:C52F.0007: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input0
[ 4100.439027] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.1/0003:046D:C52F.0008/input/input12
[ 4100.475798] usb 2-1.7.2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 4100.497365] hid-generic 0003:046D:C52F.0008: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input1
[ 4100.726983] ath9k_htc 2-1.7.2:1.0: ath9k_htc: HTC initialized with 33 credits
[ 4101.006513] ath9k_htc 2-1.7.2:1.0: ath9k_htc: FW Version: 1.4
[ 4101.006517] ath9k_htc 2-1.7.2:1.0: FW RMW support: On
[ 4101.006519] ath: EEPROM regdomain: 0x809c
[ 4101.006520] ath: EEPROM indicates we should expect a country code
[ 4101.006521] ath: doing EEPROM country->regdmn map search
[ 4101.006522] ath: country maps to regdmn code: 0x52
[ 4101.006524] ath: Country alpha2 being used: CN
[ 4101.006525] ath: Regpair used: 0x52
[ 4101.010220] ieee80211 phy3: Atheros AR9271 Rev:1
[ 4101.020428] ath9k_htc 2-1.7.2:1.0 wlxf81a6721bb82: renamed from wlan0
[ 4101.047756] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 4101.182576] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 4101.231843] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 4102.424001] wlxf81a6721bb82: authenticate with 24:09:95:ce:8c:84
[ 4102.599027] wlxf81a6721bb82: send auth to 24:09:95:ce:8c:84 (try 1/3)
[ 4102.600766] wlxf81a6721bb82: authenticated
[ 4102.601091] wlxf81a6721bb82: associate with 24:09:95:ce:8c:84 (try 1/3)
[ 4102.605146] wlxf81a6721bb82: RX AssocResp from 24:09:95:ce:8c:84 (capab=0x411 status=0 aid=3)
[ 4102.613378] wlxf81a6721bb82: associated
[ 4102.635812] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf81a6721bb82: link becomes ready
[ 4448.477728] usb 2-1.7: clear tt 1 (0110) error -71
[ 4448.483851] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.488127] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.492350] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.496652] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.500852] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.500855] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 4448.505100] usb 2-1.7-port4: cannot disable (err = -71)
[ 4448.509351] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.513601] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.517850] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.522099] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.526350] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.526353] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 4448.530599] usb 2-1.7-port4: cannot disable (err = -71)
[ 4448.534850] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.539098] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.543350] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.547596] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.551850] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.551853] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 4448.556098] usb 2-1.7-port4: cannot disable (err = -71)
[ 4448.560348] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.564597] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.568857] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.573106] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.577350] usb 2-1.7-port4: cannot reset (err = -71)
[ 4448.577353] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 4448.581634] usb 2-1.7-port4: cannot disable (err = -71)
[ 4448.585849] usb 2-1.7-port4: cannot disable (err = -71)
[ 4448.619469] usb 2-1.7: USB disconnect, device number 15
[ 4448.619471] usb 2-1.7.2: USB disconnect, device number 16
[ 4448.639895] wlxf81a6721bb82: deauthenticating from 24:09:95:ce:8c:84 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4448.987502] ath: phy3: Failed to wakeup in 500us
[ 4448.997721] ath: phy3: Failed to wakeup in 500us
[ 4449.007730] ath: phy3: Failed to wakeup in 500us
[ 4449.064021] usb 2-1.7.2: ath9k_htc: USB layer deinitialized
[ 4449.064182] usb 2-1.7.4: USB disconnect, device number 17
[ 4451.147987] usb 2-1.7: new high-speed USB device number 18 using ehci-pci
[ 4451.257627] usb 2-1.7: New USB device found, idVendor=05e3, idProduct=0608
[ 4451.257630] usb 2-1.7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4451.257633] usb 2-1.7: Product: USB2.0 Hub
[ 4451.258141] hub 2-1.7:1.0: USB hub found
[ 4451.548001] usb 2-1.7.2: new high-speed USB device number 19 using ehci-pci
[ 4451.673705] usb 2-1.7.2: New USB device found, idVendor=0cf3, idProduct=9271
[ 4451.673710] usb 2-1.7.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 4451.673712] usb 2-1.7.2: Product: USB2.0 WLAN
[ 4451.673714] usb 2-1.7.2: Manufacturer: ATHEROS
[ 4451.673716] usb 2-1.7.2: SerialNumber: 12345
[ 4451.674124] usb 2-1.7.2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[ 4451.752037] usb 2-1.7.4: new full-speed USB device number 20 using ehci-pci
[ 4451.863360] usb 2-1.7.4: New USB device found, idVendor=046d, idProduct=c52f
[ 4451.863364] usb 2-1.7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4451.863366] usb 2-1.7.4: Product: USB Receiver
[ 4451.863369] usb 2-1.7.4: Manufacturer: Logitech
[ 4451.866829] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.0/0003:046D:C52F.0009/input/input13
[ 4451.867063] hid-generic 0003:046D:C52F.0009: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input0
[ 4451.868754] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.1/0003:046D:C52F.000A/input/input14
[ 4451.928413] hid-generic 0003:046D:C52F.000A: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input1
[ 4451.962621] usb 2-1.7.2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 4452.213445] ath9k_htc 2-1.7.2:1.0: ath9k_htc: HTC initialized with 33 credits
[ 4452.471501] ath9k_htc 2-1.7.2:1.0: ath9k_htc: FW Version: 1.4
[ 4452.471504] ath9k_htc 2-1.7.2:1.0: FW RMW support: On
[ 4452.471506] ath: EEPROM regdomain: 0x809c
[ 4452.471507] ath: EEPROM indicates we should expect a country code
[ 4452.471508] ath: doing EEPROM country->regdmn map search
[ 4452.471510] ath: country maps to regdmn code: 0x52
[ 4452.471511] ath: Country alpha2 being used: CN
[ 4452.471512] ath: Regpair used: 0x52
[ 4452.475348] ieee80211 phy4: Atheros AR9271 Rev:1
[ 4452.479828] ath9k_htc 2-1.7.2:1.0 wlxf81a6721bb82: renamed from wlan0
[ 4452.504164] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 4452.637153] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 4452.692345] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 4453.867616] wlxf81a6721bb82: authenticate with 24:09:95:ce:8c:84
[ 4454.037876] wlxf81a6721bb82: send auth to 24:09:95:ce:8c:84 (try 1/3)
[ 4454.039722] wlxf81a6721bb82: authenticated
[ 4454.040078] wlxf81a6721bb82: associate with 24:09:95:ce:8c:84 (try 1/3)
[ 4454.043862] wlxf81a6721bb82: RX AssocResp from 24:09:95:ce:8c:84 (capab=0x411 status=0 aid=3)
[ 4454.051816] wlxf81a6721bb82: associated
[ 4454.073408] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf81a6721bb82: link becomes ready
[ 5689.851704] usb 2-1.7: clear tt 1 (0140) error -71
[ 5689.858949] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.863201] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.867452] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.871702] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.875949] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.875952] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 5689.880268] usb 2-1.7-port4: cannot disable (err = -71)
[ 5689.884506] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.888703] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.892971] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.897201] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.901451] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.901454] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 5689.905700] usb 2-1.7-port4: cannot disable (err = -71)
[ 5689.909950] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.914199] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.918450] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.922700] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.926980] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.926983] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 5689.931201] usb 2-1.7-port4: cannot disable (err = -71)
[ 5689.935506] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.939703] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.943953] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.948257] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.952451] usb 2-1.7-port4: cannot reset (err = -71)
[ 5689.952455] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 5689.954953] usb 2-1.7: USB disconnect, device number 18
[ 5689.954956] usb 2-1.7.2: USB disconnect, device number 19
[ 5689.956698] usb 2-1.7-port4: cannot disable (err = -71)
[ 5689.978897] wlxf81a6721bb82: deauthenticating from 24:09:95:ce:8c:84 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 5690.266306] ath: phy4: Failed to wakeup in 500us
[ 5690.278196] ath: phy4: Failed to wakeup in 500us
[ 5690.288194] ath: phy4: Failed to wakeup in 500us
[ 5690.374993] usb 2-1.7.2: ath9k_htc: USB layer deinitialized
[ 5690.375875] usb 2-1.7.4: USB disconnect, device number 20
[ 5692.994976] usb 2-1.7: new high-speed USB device number 21 using ehci-pci
[ 5693.104856] usb 2-1.7: New USB device found, idVendor=05e3, idProduct=0608
[ 5693.104860] usb 2-1.7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5693.104862] usb 2-1.7: Product: USB2.0 Hub
[ 5693.105369] hub 2-1.7:1.0: USB hub found
[ 5693.394991] usb 2-1.7.2: new high-speed USB device number 22 using ehci-pci
[ 5693.520675] usb 2-1.7.2: New USB device found, idVendor=0cf3, idProduct=9271
[ 5693.520679] usb 2-1.7.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 5693.520681] usb 2-1.7.2: Product: USB2.0 WLAN
[ 5693.520684] usb 2-1.7.2: Manufacturer: ATHEROS
[ 5693.520686] usb 2-1.7.2: SerialNumber: 12345
[ 5693.521132] usb 2-1.7.2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[ 5693.598991] usb 2-1.7.4: new full-speed USB device number 23 using ehci-pci
[ 5693.710840] usb 2-1.7.4: New USB device found, idVendor=046d, idProduct=c52f
[ 5693.710844] usb 2-1.7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5693.710846] usb 2-1.7.4: Product: USB Receiver
[ 5693.710848] usb 2-1.7.4: Manufacturer: Logitech
[ 5693.713316] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.0/0003:046D:C52F.000B/input/input15
[ 5693.713557] hid-generic 0003:046D:C52F.000B: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input0
[ 5693.715172] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.1/0003:046D:C52F.000C/input/input16
[ 5693.775305] hid-generic 0003:046D:C52F.000C: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input1
[ 5693.810167] usb 2-1.7.2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 5694.060925] ath9k_htc 2-1.7.2:1.0: ath9k_htc: HTC initialized with 33 credits
[ 5694.303192] ath9k_htc 2-1.7.2:1.0: ath9k_htc: FW Version: 1.4
[ 5694.303194] ath9k_htc 2-1.7.2:1.0: FW RMW support: On
[ 5694.303195] ath: EEPROM regdomain: 0x809c
[ 5694.303196] ath: EEPROM indicates we should expect a country code
[ 5694.303196] ath: doing EEPROM country->regdmn map search
[ 5694.303197] ath: country maps to regdmn code: 0x52
[ 5694.303197] ath: Country alpha2 being used: CN
[ 5694.303198] ath: Regpair used: 0x52
[ 5694.311917] ath9k_htc 2-1.7.2:1.0 wlxf81a6721bb82: renamed from wlan0
[ 5694.327101] ieee80211 phy5: Atheros AR9271 Rev:1
[ 5694.349172] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 5694.484220] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 5694.537862] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 5695.741590] wlxf81a6721bb82: authenticate with 24:09:95:ce:8c:84
[ 5695.912453] wlxf81a6721bb82: send auth to 24:09:95:ce:8c:84 (try 1/3)
[ 5695.914317] wlxf81a6721bb82: authenticated
[ 5695.915000] wlxf81a6721bb82: associate with 24:09:95:ce:8c:84 (try 1/3)
[ 5695.921607] wlxf81a6721bb82: RX AssocResp from 24:09:95:ce:8c:84 (capab=0x411 status=0 aid=3)
[ 5695.927938] wlxf81a6721bb82: associated
[ 5695.949877] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf81a6721bb82: link becomes ready
[ 6937.098642] usb 2-1.7: clear tt 1 (0170) error -71
[ 6937.104020] usb 2-1.7-port4: cannot reset (err = -71)
[ 6937.108265] usb 2-1.7-port4: cannot reset (err = -71)
[ 6937.112514] usb 2-1.7-port4: cannot reset (err = -71)
[ 6937.116762] usb 2-1.7-port4: cannot reset (err = -71)
[ 6937.121021] usb 2-1.7-port4: cannot reset (err = -71)
[ 6937.121026] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 6937.125262] usb 2-1.7-port4: cannot disable (err = -71)
[ 6937.129518] usb 2-1.7-port4: cannot reset (err = -71)
[ 6937.133764] usb 2-1.7-port4: cannot reset (err = -71)
[ 6937.138012] usb 2-1.7-port4: cannot reset (err = -71)
[ 6937.142264] usb 2-1.7-port4: cannot reset (err = -71)
[ 6937.146523] usb 2-1.7-port4: cannot reset (err = -71)
[ 6937.146528] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 6937.150766] usb 2-1.7-port4: cannot disable (err = -71)
[ 6937.155012] usb 2-1.7-port4: cannot reset (err = -71)
[ 6937.159293] usb 2-1.7-port4: cannot reset (err = -71)
[ 6937.163516] usb 2-1.7-port4: cannot reset (err = -71)
[ 6937.167767] usb 2-1.7-port4: cannot reset (err = -71)
[ 6937.172022] usb 2-1.7-port4: cannot reset (err = -71)
[ 6937.172026] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[ 6937.176266] usb 2-1.7-port4: cannot disable (err = -71)
[ 6937.178385] usb 2-1.7: USB disconnect, device number 21
[ 6937.178389] usb 2-1.7.2: USB disconnect, device number 22
[ 6937.180509] usb 2-1.7-port4: cannot reset (err = -71)
[ 6937.584087] wlxf81a6721bb82: deauthenticating from 24:09:95:ce:8c:84 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6937.684722] ath: phy5: Chip reset failed
[ 6937.684726] ath: phy5: Unable to reset channel (2412 Mhz) reset status -22
[ 6937.684729] ath: phy5: Unable to set channel
[ 6937.694757] ath: phy5: Failed to wakeup in 500us
[ 6937.705117] ath: phy5: Failed to wakeup in 500us
[ 6937.715122] ath: phy5: Failed to wakeup in 500us
[ 6937.988188] usb 2-1.7.2: ath9k_htc: USB layer deinitialized
[ 6937.988354] usb 2-1.7.4: USB disconnect, device number 23
[ 6943.068438] usb 2-1.6.1: USB disconnect, device number 6
[ 6943.392196] usb 2-1.6.1: new high-speed USB device number 24 using ehci-pci
[ 6943.504140] usb 2-1.6.1: New USB device found, idVendor=05e3, idProduct=0716
[ 6943.504153] usb 2-1.6.1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 6943.504155] usb 2-1.6.1: Product: USB Storage
[ 6943.504157] usb 2-1.6.1: SerialNumber: 000000009727
[ 6943.505981] usb-storage 2-1.6.1:1.0: USB Mass Storage device detected
[ 6943.506175] scsi host9: usb-storage 2-1.6.1:1.0
[ 6943.728185] usb 2-1.6.2: new high-speed USB device number 25 using ehci-pci
[ 6943.837892] usb 2-1.6.2: New USB device found, idVendor=05e3, idProduct=0608
[ 6943.837896] usb 2-1.6.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6943.837899] usb 2-1.6.2: Product: USB2.0 Hub
[ 6943.838418] hub 2-1.6.2:1.0: USB hub found
[ 6944.128224] usb 2-1.6.2.2: new high-speed USB device number 26 using ehci-pci
[ 6944.253547] usb 2-1.6.2.2: New USB device found, idVendor=0cf3, idProduct=9271
[ 6944.253551] usb 2-1.6.2.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 6944.253553] usb 2-1.6.2.2: Product: USB2.0 WLAN
[ 6944.253556] usb 2-1.6.2.2: Manufacturer: ATHEROS
[ 6944.253558] usb 2-1.6.2.2: SerialNumber: 12345
[ 6944.254109] usb 2-1.6.2.2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[ 6944.332227] usb 2-1.6.2.4: new full-speed USB device number 27 using ehci-pci
[ 6944.443795] usb 2-1.6.2.4: New USB device found, idVendor=046d, idProduct=c52f
[ 6944.443800] usb 2-1.6.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6944.443803] usb 2-1.6.2.4: Product: USB Receiver
[ 6944.443805] usb 2-1.6.2.4: Manufacturer: Logitech
[ 6944.446190] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2.4/2-1.6.2.4:1.0/0003:046D:C52F.000D/input/input17
[ 6944.446346] hid-generic 0003:046D:C52F.000D: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.6.2.4/input0
[ 6944.448029] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2.4/2-1.6.2.4:1.1/0003:046D:C52F.000E/input/input18
[ 6944.504565] hid-generic 0003:046D:C52F.000E: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.6.2.4/input1
[ 6944.542200] usb 2-1.6.2.2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 6944.749721] sd 9:0:0:2: [sde] No Caching mode page found
[ 6944.795206] ath9k_htc 2-1.6.2.2:1.0: ath9k_htc: HTC initialized with 33 credits
[ 6945.046231] ath9k_htc 2-1.6.2.2:1.0: ath9k_htc: FW Version: 1.4
[ 6945.046234] ath9k_htc 2-1.6.2.2:1.0: FW RMW support: On
[ 6945.046236] ath: EEPROM regdomain: 0x809c
[ 6945.046237] ath: EEPROM indicates we should expect a country code
[ 6945.046238] ath: doing EEPROM country->regdmn map search
[ 6945.046240] ath: country maps to regdmn code: 0x52
[ 6945.046241] ath: Country alpha2 being used: CN
[ 6945.046242] ath: Regpair used: 0x52
[ 6945.050710] ieee80211 phy6: Atheros AR9271 Rev:1
[ 6945.056300] ath9k_htc 2-1.6.2.2:1.0 wlxf81a6721bb82: renamed from wlan0
[ 6945.087800] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 6945.224319] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 6945.286576] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[ 6946.518066] wlxf81a6721bb82: authenticate with 24:09:95:ce:8c:84
[ 6946.682516] wlxf81a6721bb82: send auth to 24:09:95:ce:8c:84 (try 1/3)
[ 6946.684354] wlxf81a6721bb82: authenticated
[ 6946.688244] wlxf81a6721bb82: associate with 24:09:95:ce:8c:84 (try 1/3)
[ 6946.692386] wlxf81a6721bb82: RX AssocResp from 24:09:95:ce:8c:84 (capab=0x411 status=0 aid=3)
[ 6946.698580] wlxf81a6721bb82: associated
[ 6946.725813] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf81a6721bb82: link becomes ready
[10205.218214] usb 2-1.6.2: clear tt 1 (01b0) error -71
[10205.224458] usb 2-1.6.2-port4: cannot reset (err = -71)
[10205.228710] usb 2-1.6.2-port4: cannot reset (err = -71)
[10205.233211] usb 2-1.6.2-port4: cannot reset (err = -71)
[10205.237203] usb 2-1.6.2-port4: cannot reset (err = -71)
[10205.241450] usb 2-1.6.2-port4: cannot reset (err = -71)
[10205.241453] usb 2-1.6.2-port4: Cannot enable. Maybe the USB cable is bad?
[10205.245708] usb 2-1.6.2-port4: cannot disable (err = -71)
[10205.249952] usb 2-1.6.2-port4: cannot reset (err = -71)
[10205.253449] usb 2-1.6.2: USB disconnect, device number 25
[10205.253452] usb 2-1.6.2.2: USB disconnect, device number 26
[10205.254197] usb 2-1.6.2-port4: cannot reset (err = -71)
[10205.280026] wlxf81a6721bb82: deauthenticating from 24:09:95:ce:8c:84 by local choice (Reason: 3=DEAUTH_LEAVING)
[10205.663463] ath: phy6: Failed to wakeup in 500us
[10205.673776] ath: phy6: Failed to wakeup in 500us
[10205.683768] ath: phy6: Failed to wakeup in 500us
[10205.752123] usb 2-1.6.2.2: ath9k_htc: USB layer deinitialized
[10205.752293] usb 2-1.6.2.4: USB disconnect, device number 27
[10211.364151] usb 2-1.7: new high-speed USB device number 28 using ehci-pci
[10211.474080] usb 2-1.7: New USB device found, idVendor=05e3, idProduct=0608
[10211.474084] usb 2-1.7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[10211.474087] usb 2-1.7: Product: USB2.0 Hub
[10211.474565] hub 2-1.7:1.0: USB hub found
[10211.764167] usb 2-1.7.2: new high-speed USB device number 29 using ehci-pci
[10211.889032] usb 2-1.7.2: New USB device found, idVendor=0cf3, idProduct=9271
[10211.889036] usb 2-1.7.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[10211.889038] usb 2-1.7.2: Product: USB2.0 WLAN
[10211.889041] usb 2-1.7.2: Manufacturer: ATHEROS
[10211.889043] usb 2-1.7.2: SerialNumber: 12345
[10211.889463] usb 2-1.7.2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[10211.968172] usb 2-1.7.4: new full-speed USB device number 30 using ehci-pci
[10212.079616] usb 2-1.7.4: New USB device found, idVendor=046d, idProduct=c52f
[10212.079620] usb 2-1.7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[10212.079623] usb 2-1.7.4: Product: USB Receiver
[10212.079625] usb 2-1.7.4: Manufacturer: Logitech
[10212.081788] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.0/0003:046D:C52F.000F/input/input19
[10212.140419] hid-generic 0003:046D:C52F.000F: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input0
[10212.142140] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.1/0003:046D:C52F.0010/input/input20
[10212.177571] usb 2-1.7.2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[10212.200441] hid-generic 0003:046D:C52F.0010: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input1
[10212.428649] ath9k_htc 2-1.7.2:1.0: ath9k_htc: HTC initialized with 33 credits
[10212.685404] ath9k_htc 2-1.7.2:1.0: ath9k_htc: FW Version: 1.4
[10212.685408] ath9k_htc 2-1.7.2:1.0: FW RMW support: On
[10212.685410] ath: EEPROM regdomain: 0x809c
[10212.685411] ath: EEPROM indicates we should expect a country code
[10212.685412] ath: doing EEPROM country->regdmn map search
[10212.685413] ath: country maps to regdmn code: 0x52
[10212.685415] ath: Country alpha2 being used: CN
[10212.685416] ath: Regpair used: 0x52
[10212.697258] ath9k_htc 2-1.7.2:1.0 wlxf81a6721bb82: renamed from wlan0
[10212.697437] ieee80211 phy7: Atheros AR9271 Rev:1
[10212.727946] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[10212.860774] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[10212.912814] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[10214.097759] wlxf81a6721bb82: authenticate with 24:09:95:ce:8c:84
[10214.265747] wlxf81a6721bb82: send auth to 24:09:95:ce:8c:84 (try 1/3)
[10214.267603] wlxf81a6721bb82: authenticated
[10214.268232] wlxf81a6721bb82: associate with 24:09:95:ce:8c:84 (try 1/3)
[10214.271959] wlxf81a6721bb82: RX AssocResp from 24:09:95:ce:8c:84 (capab=0x411 status=0 aid=3)
[10214.278416] wlxf81a6721bb82: associated
[10214.300107] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf81a6721bb82: link becomes ready
[10645.885179] usb 2-1.7: clear tt 1 (01e0) error -71
[10645.894674] usb 2-1.7-port4: cannot reset (err = -71)
[10645.898977] usb 2-1.7-port4: cannot reset (err = -71)
[10645.903175] usb 2-1.7-port4: cannot reset (err = -71)
[10645.907426] usb 2-1.7-port4: cannot reset (err = -71)
[10645.911672] usb 2-1.7-port4: cannot reset (err = -71)
[10645.911676] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[10645.915929] usb 2-1.7-port4: cannot disable (err = -71)
[10645.920179] usb 2-1.7-port4: cannot reset (err = -71)
[10645.924424] usb 2-1.7-port4: cannot reset (err = -71)
[10645.928696] usb 2-1.7-port4: cannot reset (err = -71)
[10645.932925] usb 2-1.7-port4: cannot reset (err = -71)
[10645.937174] usb 2-1.7-port4: cannot reset (err = -71)
[10645.937178] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[10645.941424] usb 2-1.7-port4: cannot disable (err = -71)
[10645.945674] usb 2-1.7-port4: cannot reset (err = -71)
[10645.949948] usb 2-1.7-port4: cannot reset (err = -71)
[10645.954187] usb 2-1.7-port4: cannot reset (err = -71)
[10645.958423] usb 2-1.7-port4: cannot reset (err = -71)
[10645.962673] usb 2-1.7-port4: cannot reset (err = -71)
[10645.962676] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[10645.966927] usb 2-1.7-port4: cannot disable (err = -71)
[10645.971174] usb 2-1.7-port4: cannot reset (err = -71)
[10645.975425] usb 2-1.7-port4: cannot reset (err = -71)
[10645.979699] usb 2-1.7-port4: cannot reset (err = -71)
[10645.983924] usb 2-1.7-port4: cannot reset (err = -71)
[10645.988177] usb 2-1.7-port4: cannot reset (err = -71)
[10645.988181] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[10645.992422] usb 2-1.7-port4: cannot disable (err = -71)
[10645.996678] usb 2-1.7-port4: cannot disable (err = -71)
[10646.081049] usb 2-1.7: USB disconnect, device number 28
[10646.081053] usb 2-1.7.2: USB disconnect, device number 29
[10646.098759] wlxf81a6721bb82: deauthenticating from 24:09:95:ce:8c:84 by local choice (Reason: 3=DEAUTH_LEAVING)
[10646.314288] ath: phy7: Failed to wakeup in 500us
[10646.324556] ath: phy7: Failed to wakeup in 500us
[10646.334556] ath: phy7: Failed to wakeup in 500us
[10646.394859] usb 2-1.7.2: ath9k_htc: USB layer deinitialized
[10646.395029] usb 2-1.7.4: USB disconnect, device number 30
[10649.886883] usb 2-1.7: new high-speed USB device number 31 using ehci-pci
[10649.996703] usb 2-1.7: New USB device found, idVendor=05e3, idProduct=0608
[10649.996706] usb 2-1.7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[10649.996709] usb 2-1.7: Product: USB2.0 Hub
[10649.997220] hub 2-1.7:1.0: USB hub found
[10650.294878] usb 2-1.7.2: new high-speed USB device number 32 using ehci-pci
[10650.420395] usb 2-1.7.2: New USB device found, idVendor=0cf3, idProduct=9271
[10650.420399] usb 2-1.7.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[10650.420401] usb 2-1.7.2: Product: USB2.0 WLAN
[10650.420404] usb 2-1.7.2: Manufacturer: ATHEROS
[10650.420406] usb 2-1.7.2: SerialNumber: 12345
[10650.420827] usb 2-1.7.2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[10650.498876] usb 2-1.7.4: new full-speed USB device number 33 using ehci-pci
[10650.610318] usb 2-1.7.4: New USB device found, idVendor=046d, idProduct=c52f
[10650.610322] usb 2-1.7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[10650.610324] usb 2-1.7.4: Product: USB Receiver
[10650.610327] usb 2-1.7.4: Manufacturer: Logitech
[10650.612759] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.0/0003:046D:C52F.0011/input/input21
[10650.671200] hid-generic 0003:046D:C52F.0011: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input0
[10650.672932] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.1/0003:046D:C52F.0012/input/input22
[10650.707856] usb 2-1.7.2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[10650.731218] hid-generic 0003:046D:C52F.0012: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input1
[10650.958675] ath9k_htc 2-1.7.2:1.0: ath9k_htc: HTC initialized with 33 credits
[10651.218016] ath9k_htc 2-1.7.2:1.0: ath9k_htc: FW Version: 1.4
[10651.218019] ath9k_htc 2-1.7.2:1.0: FW RMW support: On
[10651.218021] ath: EEPROM regdomain: 0x809c
[10651.218022] ath: EEPROM indicates we should expect a country code
[10651.218023] ath: doing EEPROM country->regdmn map search
[10651.218024] ath: country maps to regdmn code: 0x52
[10651.218025] ath: Country alpha2 being used: CN
[10651.218026] ath: Regpair used: 0x52
[10651.222334] ieee80211 phy8: Atheros AR9271 Rev:1
[10651.225105] ath9k_htc 2-1.7.2:1.0 wlxf81a6721bb82: renamed from wlan0
[10651.262903] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[10651.397430] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[10651.445915] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[10652.617933] wlxf81a6721bb82: authenticate with 24:09:95:ce:8c:84
[10652.788609] wlxf81a6721bb82: send auth to 24:09:95:ce:8c:84 (try 1/3)
[10652.790531] wlxf81a6721bb82: authenticated
[10652.790974] wlxf81a6721bb82: associate with 24:09:95:ce:8c:84 (try 1/3)
[10652.795029] wlxf81a6721bb82: RX AssocResp from 24:09:95:ce:8c:84 (capab=0x411 status=0 aid=3)
[10652.803041] wlxf81a6721bb82: associated
[10653.334604] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf81a6721bb82: link becomes ready
[11400.742996] usb 2-1.7: clear tt 1 (0210) error -71
[11400.748627] usb 2-1.7-port4: cannot reset (err = -71)
[11400.752868] usb 2-1.7-port4: cannot reset (err = -71)
[11400.757120] usb 2-1.7-port4: cannot reset (err = -71)
[11400.761368] usb 2-1.7-port4: cannot reset (err = -71)
[11400.763740] usb 2-1.7: USB disconnect, device number 31
[11400.763744] usb 2-1.7.2: USB disconnect, device number 32
[11400.765617] usb 2-1.7-port4: cannot reset (err = -71)
[11400.765620] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[11401.192681] wlxf81a6721bb82: deauthenticating from 24:09:95:ce:8c:84 by local choice (Reason: 3=DEAUTH_LEAVING)
[11401.293231] ath: phy8: Chip reset failed
[11401.293235] ath: phy8: Unable to reset channel (2412 Mhz) reset status -22
[11401.293237] ath: phy8: Unable to set channel
[11401.303273] ath: phy8: Failed to wakeup in 500us
[11401.768754] usb 2-1.7.2: ath9k_htc: USB layer deinitialized
[11401.769473] usb 2-1.7.4: USB disconnect, device number 33
[11406.616812] usb 2-1.7: new high-speed USB device number 34 using ehci-pci
[11406.726627] usb 2-1.7: New USB device found, idVendor=05e3, idProduct=0608
[11406.726631] usb 2-1.7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[11406.726633] usb 2-1.7: Product: USB2.0 Hub
[11406.727150] hub 2-1.7:1.0: USB hub found
[11407.016821] usb 2-1.7.2: new high-speed USB device number 35 using ehci-pci
[11407.142488] usb 2-1.7.2: New USB device found, idVendor=0cf3, idProduct=9271
[11407.142492] usb 2-1.7.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[11407.142495] usb 2-1.7.2: Product: USB2.0 WLAN
[11407.142497] usb 2-1.7.2: Manufacturer: ATHEROS
[11407.142499] usb 2-1.7.2: SerialNumber: 12345
[11407.142902] usb 2-1.7.2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[11407.224827] usb 2-1.7.4: new full-speed USB device number 36 using ehci-pci
[11407.340477] usb 2-1.7.4: New USB device found, idVendor=046d, idProduct=c52f
[11407.340480] usb 2-1.7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[11407.340481] usb 2-1.7.4: Product: USB Receiver
[11407.340482] usb 2-1.7.4: Manufacturer: Logitech
[11407.342594] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.0/0003:046D:C52F.0013/input/input23
[11407.401168] hid-generic 0003:046D:C52F.0013: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input0
[11407.402864] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.1/0003:046D:C52F.0014/input/input24
[11407.430033] usb 2-1.7.2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[11407.461156] hid-generic 0003:046D:C52F.0014: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input1
[11407.681115] ath9k_htc 2-1.7.2:1.0: ath9k_htc: HTC initialized with 33 credits
[11407.934513] ath9k_htc 2-1.7.2:1.0: ath9k_htc: FW Version: 1.4
[11407.934517] ath9k_htc 2-1.7.2:1.0: FW RMW support: On
[11407.934519] ath: EEPROM regdomain: 0x809c
[11407.934520] ath: EEPROM indicates we should expect a country code
[11407.934521] ath: doing EEPROM country->regdmn map search
[11407.934522] ath: country maps to regdmn code: 0x52
[11407.934523] ath: Country alpha2 being used: CN
[11407.934524] ath: Regpair used: 0x52
[11407.942943] ath9k_htc 2-1.7.2:1.0 wlxf81a6721bb82: renamed from wlan0
[11407.946120] ieee80211 phy9: Atheros AR9271 Rev:1
[11407.973334] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[11408.108685] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[11408.165526] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[11409.384283] wlxf81a6721bb82: authenticate with 24:09:95:ce:8c:84
[11409.555978] wlxf81a6721bb82: send auth to 24:09:95:ce:8c:84 (try 1/3)
[11409.557887] wlxf81a6721bb82: authenticated
[11409.560852] wlxf81a6721bb82: associate with 24:09:95:ce:8c:84 (try 1/3)
[11409.564637] wlxf81a6721bb82: RX AssocResp from 24:09:95:ce:8c:84 (capab=0x411 status=0 aid=3)
[11409.570966] wlxf81a6721bb82: associated
[11409.598957] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf81a6721bb82: link becomes ready
[13668.169427] usb 2-1.7: clear tt 1 (0240) error -71
[13668.176801] usb 2-1.7-port4: cannot reset (err = -71)
[13668.181051] usb 2-1.7-port4: cannot reset (err = -71)
[13668.185301] usb 2-1.7-port4: cannot reset (err = -71)
[13668.189550] usb 2-1.7-port4: cannot reset (err = -71)
[13668.193808] usb 2-1.7-port4: cannot reset (err = -71)
[13668.193813] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[13668.198049] usb 2-1.7-port4: cannot disable (err = -71)
[13668.202325] usb 2-1.7-port4: cannot reset (err = -71)
[13668.206558] usb 2-1.7-port4: cannot reset (err = -71)
[13668.210806] usb 2-1.7-port4: cannot reset (err = -71)
[13668.215050] usb 2-1.7-port4: cannot reset (err = -71)
[13668.219302] usb 2-1.7-port4: cannot reset (err = -71)
[13668.219305] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[13668.223550] usb 2-1.7-port4: cannot disable (err = -71)
[13668.227799] usb 2-1.7-port4: cannot reset (err = -71)
[13668.232051] usb 2-1.7-port4: cannot reset (err = -71)
[13668.236300] usb 2-1.7-port4: cannot reset (err = -71)
[13668.240554] usb 2-1.7-port4: cannot reset (err = -71)
[13668.244804] usb 2-1.7-port4: cannot reset (err = -71)
[13668.244808] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[13668.249049] usb 2-1.7-port4: cannot disable (err = -71)
[13668.253299] usb 2-1.7-port4: cannot reset (err = -71)
[13668.257580] usb 2-1.7-port4: cannot reset (err = -71)
[13668.261804] usb 2-1.7-port4: cannot reset (err = -71)
[13668.266051] usb 2-1.7-port4: cannot reset (err = -71)
[13668.270301] usb 2-1.7-port4: cannot reset (err = -71)
[13668.270304] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[13668.274549] usb 2-1.7-port4: cannot disable (err = -71)
[13668.278802] usb 2-1.7-port4: cannot disable (err = -71)
[13668.396171] usb 2-1.7: USB disconnect, device number 34
[13668.396173] usb 2-1.7.2: USB disconnect, device number 35
[13668.436759] wlxf81a6721bb82: deauthenticating from 24:09:95:ce:8c:84 by local choice (Reason: 3=DEAUTH_LEAVING)
[13668.709060] ath: phy9: Chip reset failed
[13668.709064] ath: phy9: Unable to reset channel (2412 Mhz) reset status -22
[13668.709066] ath: phy9: Unable to set channel
[13668.719075] ath: phy9: Failed to wakeup in 500us
[13669.196863] usb 2-1.7.2: ath9k_htc: USB layer deinitialized
[13669.197937] usb 2-1.7.4: USB disconnect, device number 36
[13675.784891] usb 2-1.7: new high-speed USB device number 37 using ehci-pci
[13675.894543] usb 2-1.7: New USB device found, idVendor=05e3, idProduct=0608
[13675.894547] usb 2-1.7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[13675.894549] usb 2-1.7: Product: USB2.0 Hub
[13675.895072] hub 2-1.7:1.0: USB hub found
[13676.184933] usb 2-1.7.2: new high-speed USB device number 38 using ehci-pci
[13676.309743] usb 2-1.7.2: New USB device found, idVendor=0cf3, idProduct=9271
[13676.309745] usb 2-1.7.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[13676.309746] usb 2-1.7.2: Product: USB2.0 WLAN
[13676.309748] usb 2-1.7.2: Manufacturer: ATHEROS
[13676.309749] usb 2-1.7.2: SerialNumber: 12345
[13676.310027] usb 2-1.7.2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[13676.388914] usb 2-1.7.4: new full-speed USB device number 39 using ehci-pci
[13676.504567] usb 2-1.7.4: New USB device found, idVendor=046d, idProduct=c52f
[13676.504570] usb 2-1.7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[13676.504572] usb 2-1.7.4: Product: USB Receiver
[13676.504573] usb 2-1.7.4: Manufacturer: Logitech
[13676.507022] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.0/0003:046D:C52F.0015/input/input25
[13676.507195] hid-generic 0003:046D:C52F.0015: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input0
[13676.508671] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.1/0003:046D:C52F.0016/input/input26
[13676.565336] hid-generic 0003:046D:C52F.0016: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input1
[13676.596350] usb 2-1.7.2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[13676.847235] ath9k_htc 2-1.7.2:1.0: ath9k_htc: HTC initialized with 33 credits
[13677.098262] ath9k_htc 2-1.7.2:1.0: ath9k_htc: FW Version: 1.4
[13677.098266] ath9k_htc 2-1.7.2:1.0: FW RMW support: On
[13677.098268] ath: EEPROM regdomain: 0x809c
[13677.098269] ath: EEPROM indicates we should expect a country code
[13677.098270] ath: doing EEPROM country->regdmn map search
[13677.098271] ath: country maps to regdmn code: 0x52
[13677.098272] ath: Country alpha2 being used: CN
[13677.098273] ath: Regpair used: 0x52
[13677.102283] ieee80211 phy10: Atheros AR9271 Rev:1
[13677.108836] ath9k_htc 2-1.7.2:1.0 wlxf81a6721bb82: renamed from wlan0
[13677.143836] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[13677.282481] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[13677.335565] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[13678.523135] wlxf81a6721bb82: authenticate with 24:09:95:ce:8c:84
[13678.705184] wlxf81a6721bb82: send auth to 24:09:95:ce:8c:84 (try 1/3)
[13678.707015] wlxf81a6721bb82: authenticated
[13678.709032] wlxf81a6721bb82: associate with 24:09:95:ce:8c:84 (try 1/3)
[13678.712778] wlxf81a6721bb82: RX AssocResp from 24:09:95:ce:8c:84 (capab=0x411 status=0 aid=3)
[13678.719256] wlxf81a6721bb82: associated
[13678.746324] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf81a6721bb82: link becomes ready
[15197.279930] usb 2-1.7: clear tt 1 (0270) error -71
[15197.285554] usb 2-1.7-port4: cannot reset (err = -71)
[15197.289830] usb 2-1.7-port4: cannot reset (err = -71)
[15197.294052] usb 2-1.7-port4: cannot reset (err = -71)
[15197.298303] usb 2-1.7-port4: cannot reset (err = -71)
[15197.302554] usb 2-1.7-port4: cannot reset (err = -71)
[15197.302557] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[15197.306801] usb 2-1.7-port4: cannot disable (err = -71)
[15197.311050] usb 2-1.7-port4: cannot reset (err = -71)
[15197.315304] usb 2-1.7-port4: cannot reset (err = -71)
[15197.319551] usb 2-1.7-port4: cannot reset (err = -71)
[15197.323802] usb 2-1.7-port4: cannot reset (err = -71)
[15197.329595] usb 2-1.7-port4: cannot reset (err = -71)
[15197.329600] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[15197.333583] usb 2-1.7-port4: cannot disable (err = -71)
[15197.337806] usb 2-1.7-port4: cannot reset (err = -71)
[15197.342051] usb 2-1.7-port4: cannot reset (err = -71)
[15197.346302] usb 2-1.7-port4: cannot reset (err = -71)
[15197.350551] usb 2-1.7-port4: cannot reset (err = -71)
[15197.354800] usb 2-1.7-port4: cannot reset (err = -71)
[15197.354803] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[15197.359053] usb 2-1.7-port4: cannot disable (err = -71)
[15197.363303] usb 2-1.7-port4: cannot reset (err = -71)
[15197.367553] usb 2-1.7-port4: cannot reset (err = -71)
[15197.371798] usb 2-1.7-port4: cannot reset (err = -71)
[15197.376047] usb 2-1.7-port4: cannot reset (err = -71)
[15197.380303] usb 2-1.7-port4: cannot reset (err = -71)
[15197.380306] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[15197.384553] usb 2-1.7-port4: cannot disable (err = -71)
[15197.388801] usb 2-1.7-port4: cannot disable (err = -71)
[15197.474047] usb 2-1.7: USB disconnect, device number 37
[15197.474050] usb 2-1.7.2: USB disconnect, device number 38
[15197.493747] wlxf81a6721bb82: deauthenticating from 24:09:95:ce:8c:84 by local choice (Reason: 3=DEAUTH_LEAVING)
[15197.741129] ath: phy10: Failed to wakeup in 500us
[15197.751428] ath: phy10: Failed to wakeup in 500us
[15197.761440] ath: phy10: Failed to wakeup in 500us
[15197.849706] usb 2-1.7.2: ath9k_htc: USB layer deinitialized
[15197.850822] usb 2-1.7.4: USB disconnect, device number 39
[15199.233661] usb 2-1.7: new high-speed USB device number 40 using ehci-pci
[15199.342913] usb 2-1.7: New USB device found, idVendor=05e3, idProduct=0608
[15199.342915] usb 2-1.7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[15199.342917] usb 2-1.7: Product: USB2.0 Hub
[15199.343321] hub 2-1.7:1.0: USB hub found
[15199.629675] usb 2-1.7.2: new high-speed USB device number 41 using ehci-pci
[15199.754539] usb 2-1.7.2: New USB device found, idVendor=0cf3, idProduct=9271
[15199.754543] usb 2-1.7.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[15199.754546] usb 2-1.7.2: Product: USB2.0 WLAN
[15199.754548] usb 2-1.7.2: Manufacturer: ATHEROS
[15199.754550] usb 2-1.7.2: SerialNumber: 12345
[15199.755021] usb 2-1.7.2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[15199.833686] usb 2-1.7.4: new full-speed USB device number 42 using ehci-pci
[15199.944708] usb 2-1.7.4: New USB device found, idVendor=046d, idProduct=c52f
[15199.944712] usb 2-1.7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[15199.944715] usb 2-1.7.4: Product: USB Receiver
[15199.944717] usb 2-1.7.4: Manufacturer: Logitech
[15199.948019] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.0/0003:046D:C52F.0017/input/input27
[15200.005966] hid-generic 0003:046D:C52F.0017: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input0
[15200.007712] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.1/0003:046D:C52F.0018/input/input28
[15200.042329] usb 2-1.7.2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[15200.066025] hid-generic 0003:046D:C52F.0018: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input1
[15200.293028] ath9k_htc 2-1.7.2:1.0: ath9k_htc: HTC initialized with 33 credits
[15200.550308] ath9k_htc 2-1.7.2:1.0: ath9k_htc: FW Version: 1.4
[15200.550311] ath9k_htc 2-1.7.2:1.0: FW RMW support: On
[15200.550313] ath: EEPROM regdomain: 0x809c
[15200.550314] ath: EEPROM indicates we should expect a country code
[15200.550316] ath: doing EEPROM country->regdmn map search
[15200.550317] ath: country maps to regdmn code: 0x52
[15200.550318] ath: Country alpha2 being used: CN
[15200.550319] ath: Regpair used: 0x52
[15200.554338] ieee80211 phy11: Atheros AR9271 Rev:1
[15200.561815] ath9k_htc 2-1.7.2:1.0 wlxf81a6721bb82: renamed from wlan0
[15200.589294] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[15200.724969] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[15200.773127] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[15201.970576] wlxf81a6721bb82: authenticate with 24:09:95:ce:8c:84
[15202.139065] wlxf81a6721bb82: send auth to 24:09:95:ce:8c:84 (try 1/3)
[15202.140922] wlxf81a6721bb82: authenticated
[15202.141688] wlxf81a6721bb82: associate with 24:09:95:ce:8c:84 (try 1/3)
[15202.145492] wlxf81a6721bb82: RX AssocResp from 24:09:95:ce:8c:84 (capab=0x411 status=0 aid=3)
[15202.152403] wlxf81a6721bb82: associated
[15202.185984] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf81a6721bb82: link becomes ready
[15737.813721] usb 2-1.7: clear tt 1 (02a0) error -71
[15737.825217] usb 2-1.7-port4: cannot reset (err = -71)
[15737.829498] usb 2-1.7-port4: cannot reset (err = -71)
[15737.833767] usb 2-1.7-port4: cannot reset (err = -71)
[15737.837966] usb 2-1.7-port4: cannot reset (err = -71)
[15737.842216] usb 2-1.7-port4: cannot reset (err = -71)
[15737.842219] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[15737.846465] usb 2-1.7-port4: cannot disable (err = -71)
[15737.850715] usb 2-1.7-port4: cannot reset (err = -71)
[15737.854965] usb 2-1.7-port4: cannot reset (err = -71)
[15737.859214] usb 2-1.7-port4: cannot reset (err = -71)
[15737.863469] usb 2-1.7-port4: cannot reset (err = -71)
[15737.867716] usb 2-1.7-port4: cannot reset (err = -71)
[15737.867720] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[15737.871965] usb 2-1.7-port4: cannot disable (err = -71)
[15737.876217] usb 2-1.7-port4: cannot reset (err = -71)
[15737.880470] usb 2-1.7-port4: cannot reset (err = -71)
[15737.884714] usb 2-1.7-port4: cannot reset (err = -71)
[15737.885963] usb 2-1.7: USB disconnect, device number 40
[15737.885967] usb 2-1.7.2: USB disconnect, device number 41
[15737.888970] usb 2-1.7-port4: cannot reset (err = -71)
[15737.909251] wlxf81a6721bb82: deauthenticating from 24:09:95:ce:8c:84 by local choice (Reason: 3=DEAUTH_LEAVING)
[15738.264758] ath: phy11: Failed to wakeup in 500us
[15738.278365] ath: phy11: Failed to wakeup in 500us
[15738.288364] ath: phy11: Failed to wakeup in 500us
[15738.365365] usb 2-1.7.2: ath9k_htc: USB layer deinitialized
[15738.365507] usb 2-1.7.4: USB disconnect, device number 42
[15741.949349] usb 2-1.7: new high-speed USB device number 43 using ehci-pci
[15742.059276] usb 2-1.7: New USB device found, idVendor=05e3, idProduct=0608
[15742.059280] usb 2-1.7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[15742.059282] usb 2-1.7: Product: USB2.0 Hub
[15742.059876] hub 2-1.7:1.0: USB hub found
[15742.349332] usb 2-1.7.2: new high-speed USB device number 44 using ehci-pci
[15742.475061] usb 2-1.7.2: New USB device found, idVendor=0cf3, idProduct=9271
[15742.475065] usb 2-1.7.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[15742.475068] usb 2-1.7.2: Product: USB2.0 WLAN
[15742.475070] usb 2-1.7.2: Manufacturer: ATHEROS
[15742.475072] usb 2-1.7.2: SerialNumber: 12345
[15742.475545] usb 2-1.7.2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[15742.553386] usb 2-1.7.4: new full-speed USB device number 45 using ehci-pci
[15742.664992] usb 2-1.7.4: New USB device found, idVendor=046d, idProduct=c52f
[15742.664997] usb 2-1.7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[15742.664999] usb 2-1.7.4: Product: USB Receiver
[15742.665001] usb 2-1.7.4: Manufacturer: Logitech
[15742.667592] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.0/0003:046D:C52F.0019/input/input29
[15742.725686] hid-generic 0003:046D:C52F.0019: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input0
[15742.727568] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.1/0003:046D:C52F.001A/input/input30
[15742.764013] usb 2-1.7.2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[15742.785699] hid-generic 0003:046D:C52F.001A: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input1
[15743.014874] ath9k_htc 2-1.7.2:1.0: ath9k_htc: HTC initialized with 33 credits
[15743.265036] ath9k_htc 2-1.7.2:1.0: ath9k_htc: FW Version: 1.4
[15743.265039] ath9k_htc 2-1.7.2:1.0: FW RMW support: On
[15743.265040] ath: EEPROM regdomain: 0x809c
[15743.265041] ath: EEPROM indicates we should expect a country code
[15743.265042] ath: doing EEPROM country->regdmn map search
[15743.265042] ath: country maps to regdmn code: 0x52
[15743.265043] ath: Country alpha2 being used: CN
[15743.265044] ath: Regpair used: 0x52
[15743.269893] ieee80211 phy12: Atheros AR9271 Rev:1
[15743.272305] ath9k_htc 2-1.7.2:1.0 wlxf81a6721bb82: renamed from wlan0
[15743.304008] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[15743.441097] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[15743.485119] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[15744.694492] wlxf81a6721bb82: authenticate with 24:09:95:ce:8c:84
[15744.865487] wlxf81a6721bb82: send auth to 24:09:95:ce:8c:84 (try 1/3)
[15744.867717] wlxf81a6721bb82: authenticated
[15744.869434] wlxf81a6721bb82: associate with 24:09:95:ce:8c:84 (try 1/3)
[15744.873237] wlxf81a6721bb82: RX AssocResp from 24:09:95:ce:8c:84 (capab=0x411 status=0 aid=3)
[15744.879675] wlxf81a6721bb82: associated
[15744.907573] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf81a6721bb82: link becomes ready
[16098.751246] usb 2-1.7: clear tt 1 (02d0) error -71
[16098.757114] usb 2-1.7-port4: cannot reset (err = -71)
[16098.761364] usb 2-1.7-port4: cannot reset (err = -71)
[16098.765613] usb 2-1.7-port4: cannot reset (err = -71)
[16098.769863] usb 2-1.7-port4: cannot reset (err = -71)
[16098.774116] usb 2-1.7-port4: cannot reset (err = -71)
[16098.774119] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[16098.778363] usb 2-1.7-port4: cannot disable (err = -71)
[16098.782614] usb 2-1.7-port4: cannot reset (err = -71)
[16098.786863] usb 2-1.7-port4: cannot reset (err = -71)
[16098.791113] usb 2-1.7-port4: cannot reset (err = -71)
[16098.795361] usb 2-1.7-port4: cannot reset (err = -71)
[16098.799617] usb 2-1.7-port4: cannot reset (err = -71)
[16098.799622] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[16098.803866] usb 2-1.7-port4: cannot disable (err = -71)
[16098.808115] usb 2-1.7-port4: cannot reset (err = -71)
[16098.812361] usb 2-1.7-port4: cannot reset (err = -71)
[16098.816611] usb 2-1.7-port4: cannot reset (err = -71)
[16098.820862] usb 2-1.7-port4: cannot reset (err = -71)
[16098.825159] usb 2-1.7-port4: cannot reset (err = -71)
[16098.825162] usb 2-1.7-port4: Cannot enable. Maybe the USB cable is bad?
[16098.829412] usb 2-1.7-port4: cannot disable (err = -71)
[16098.833636] usb 2-1.7-port4: cannot reset (err = -71)
[16098.837862] usb 2-1.7-port4: cannot reset (err = -71)
[16098.842110] usb 2-1.7-port4: cannot reset (err = -71)
[16098.843484] usb 2-1.7: USB disconnect, device number 43
[16098.843488] usb 2-1.7.2: USB disconnect, device number 44
[16098.846360] usb 2-1.7-port4: cannot reset (err = -71)
[16098.861069] wlxf81a6721bb82: deauthenticating from 24:09:95:ce:8c:84 by local choice (Reason: 3=DEAUTH_LEAVING)
[16099.264531] ath: phy12: Failed to wakeup in 500us
[16099.276840] ath: phy12: Failed to wakeup in 500us
[16099.286854] ath: phy12: Failed to wakeup in 500us
[16099.369144] usb 2-1.7.2: ath9k_htc: USB layer deinitialized
[16099.370813] usb 2-1.7.4: USB disconnect, device number 45
[16100.601114] usb 2-1.7: new high-speed USB device number 46 using ehci-pci
[16100.710899] usb 2-1.7: New USB device found, idVendor=05e3, idProduct=0608
[16100.710903] usb 2-1.7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[16100.710906] usb 2-1.7: Product: USB2.0 Hub
[16100.711425] hub 2-1.7:1.0: USB hub found
[16101.001119] usb 2-1.7.2: new high-speed USB device number 47 using ehci-pci
[16101.126761] usb 2-1.7.2: New USB device found, idVendor=0cf3, idProduct=9271
[16101.126765] usb 2-1.7.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[16101.126767] usb 2-1.7.2: Product: USB2.0 WLAN
[16101.126769] usb 2-1.7.2: Manufacturer: ATHEROS
[16101.126771] usb 2-1.7.2: SerialNumber: 12345
[16101.127180] usb 2-1.7.2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[16101.205128] usb 2-1.7.4: new full-speed USB device number 48 using ehci-pci
[16101.316993] usb 2-1.7.4: New USB device found, idVendor=046d, idProduct=c52f
[16101.316997] usb 2-1.7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[16101.316999] usb 2-1.7.4: Product: USB Receiver
[16101.317002] usb 2-1.7.4: Manufacturer: Logitech
[16101.319877] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.0/0003:046D:C52F.001B/input/input31
[16101.381485] hid-generic 0003:046D:C52F.001B: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input0
[16101.383158] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.4/2-1.7.4:1.1/0003:046D:C52F.001C/input/input32
[16101.416202] usb 2-1.7.2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[16101.441488] hid-generic 0003:046D:C52F.001C: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7.4/input1
[16101.667213] ath9k_htc 2-1.7.2:1.0: ath9k_htc: HTC initialized with 33 credits
[16101.911408] ath9k_htc 2-1.7.2:1.0: ath9k_htc: FW Version: 1.4
[16101.911412] ath9k_htc 2-1.7.2:1.0: FW RMW support: On
[16101.911414] ath: EEPROM regdomain: 0x809c
[16101.911415] ath: EEPROM indicates we should expect a country code
[16101.911416] ath: doing EEPROM country->regdmn map search
[16101.911417] ath: country maps to regdmn code: 0x52
[16101.911419] ath: Country alpha2 being used: CN
[16101.911419] ath: Regpair used: 0x52
[16101.919783] ieee80211 phy13: Atheros AR9271 Rev:1
[16101.922430] ath9k_htc 2-1.7.2:1.0 wlxf81a6721bb82: renamed from wlan0
[16101.948269] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[16102.082894] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[16102.137702] IPv6: ADDRCONF(NETDEV_UP): wlxf81a6721bb82: link is not ready
[16103.338417] wlxf81a6721bb82: authenticate with 24:09:95:ce:8c:84
[16103.505789] wlxf81a6721bb82: send auth to 24:09:95:ce:8c:84 (try 1/3)
[16103.525795] wlxf81a6721bb82: authenticated
[16103.529172] wlxf81a6721bb82: associate with 24:09:95:ce:8c:84 (try 1/3)
[16103.532875] wlxf81a6721bb82: RX AssocResp from 24:09:95:ce:8c:84 (capab=0x411 status=0 aid=3)
[16103.539109] wlxf81a6721bb82: associated
[16103.560309] IPv6: ADDRCONF(NETDEV_CHANGE): wlxf81a6721bb82: link becomes ready
 Release Date: 11/30/2012
  Serial services are supported (int 14h)
 Manufacturer: System manufacturer
 Product Name: System Product Name
 Serial Number: System Serial Number
 Manufacturer: ASUSTeK COMPUTER INC.
 Product Name: P8P67-M PRO
 Serial Number: MT7013029200007
 Manufacturer: Chassis Manufacture
 Serial Number: Chassis Serial Number
 Manufacturer: Intel
 Serial Number: To Be Filled By O.E.M.
 Port Type: Serial Port 16550A Compatible
 Port Type: Serial Port 16550A Compatible
 Port Type: Serial Port 16550A Compatible
 Manufacturer: To Be Filled By O.E.M.
 Serial Number: To Be Filled By O.E.M.
Invalid entry length (16). Fixed up to 11.
 Manufacturer: To Be Filled By O.E.M.
 Serial Number: To Be Filled By O.E.M.
 Manufacturer: [Empty]
 Serial Number: [Empty]
 Manufacturer: 04EF
 Serial Number: 00000000
 Manufacturer: [Empty]
 Serial Number: [Empty]
 Manufacturer: [Empty]
 Serial Number: [Empty]
wlxf81a6721bb82 IEEE 802.11 ESSID:"TALKTALKCE8C7D"
          Mode:Managed Frequency:2.412 GHz Access Point: 24:09:95:CE:8C:84
          Bit Rate=1 Mb/s Tx-Power=20 dBm
          Retry short limit:7 RTS thr:off Fragment thr:off
          Power Management:off
          Link Quality=47/70 Signal level=-63 dBm
          Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
          Tx excessive retries:24 Invalid misc:190 Missed beacon:0

lo no wireless extensions.

enp4s0 no wireless extensions.

/etc/modprobe.d/alsa-base.conf:install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
/etc/modprobe.d/blacklist-ath_pci.conf:# which ath5k cannot recover. To prevent this condition, stop
/etc/modprobe.d/blacklist-ath_pci.conf:blacklist ath_pci
/etc/modprobe.d/blacklist.conf:blacklist eth1394
/etc/modprobe.d/blacklist.conf:# replaced by p54pci
/etc/modprobe.d/blacklist.conf:blacklist prism54
/etc/modprobe.d/blacklist.conf:# replaced by b43 and ssb.
/etc/modprobe.d/blacklist.conf:blacklist bcm43xx
/etc/modprobe.d/blacklist-oss.conf:blacklist uart6850
/etc/modprobe.d/iwlwifi.conf:# /etc/modprobe.d/iwlwifi.conf
/etc/modprobe.d/iwlwifi.conf:# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the
/etc/modprobe.d/iwlwifi.conf:# microcode file installed on the system. When removing iwlwifi, first
/etc/modprobe.d/iwlwifi.conf:# remove the iwl?vm module and then iwlwifi.
/etc/modprobe.d/iwlwifi.conf:remove iwlwifi \
/etc/modprobe.d/iwlwifi.conf:(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
/etc/modprobe.d/iwlwifi.conf:&& /sbin/modprobe -r mac80211
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
16: PCI 400.0: 0200 Ethernet controller
  [Created at pci.378]
  Unique ID: Ljo_.2dzJn7ktuZF
  Parent ID: HnsE.Z52SDLRIaH2
  SysFS ID: /devices/pci0000:00/0000:00:1c.5/0000:04:00.0
  SysFS BusID: 0000:04:00.0
  Hardware Class: network
  Model: "Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x8432 "P8P67 and other motherboards"
  Revision: 0x06
  Driver: "r8169"
  Driver Modules: "r8169"
  Device File: enp4s0
  I/O Ports: 0xc000-0xcfff (rw)
  Memory Range: 0xf0004000-0xf0004fff (ro,non-prefetchable)
  Memory Range: 0xf0000000-0xf0003fff (ro,non-prefetchable)
  IRQ: 24 (no events)
  HW Address: f4:6d:04:90:cb:7a
  Permanent HW Address: f4:6d:04:90:cb:7a
  Link detected: no
  Module Alias: "pci:v000010ECd00008168sv00001043sd00008432bc02sc00i00"
  Driver Info #0:
    Driver Status: r8169 is active
    Driver Activation Cmd: "modprobe r8169"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #23 (PCI bridge)

32: USB 00.0: 0282 WLAN controller
  [Created at usb.122]
  Unique ID: twXb.B4pqOVVOeJE
  Parent ID: o2Ga.d7FDLX76qXB
  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7.2/2-1.7.2:1.0
  SysFS BusID: 2-1.7.2:1.0
  Hardware Class: network
  Model: "Qualcomm Atheros AR9271 802.11n"
  Hotplug: USB
  Vendor: usb 0x0cf3 "Qualcomm Atheros Communications"
  Device: usb 0x9271 "AR9271 802.11n"
  Revision: "1.08"
  Serial ID: "12345"
  Driver: "ath9k_htc"
  Driver Modules: "ath9k_htc"
  Device File: wlxf81a6721bb82
  Features: WLAN
  Speed: 480 Mbps
  HW Address: f8:1a:67:21:bb:82
  Permanent HW Address: f8:1a:67:21:bb:82
  Link detected: yes
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
  WLAN encryption modes: WEP40 WEP104 TKIP CCMP
  WLAN authentication modes: open sharedkey wpa-psk wpa-eap
  Module Alias: "usb:v0CF3p9271d0108dcFFdscFFdpFFicFFisc00ip00in00"
  Driver Info #0:
    Driver Status: ath9k_htc is active
    Driver Activation Cmd: "modprobe ath9k_htc"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #38 (Hub)
root 1182 0.0 0.0 45100 7912 ? Ss 09:28 0:00 /sbin/wpa_supplicant -u -s -O /run/wpa_supplicant
root 1183 0.0 0.2 170520 17116 ? Ssl 09:28 0:00 /usr/bin/python3 /usr/bin/networkd-dispatcher
root 1189 0.0 0.2 563384 17716 ? Ssl 09:28 0:04 /usr/sbin/NetworkManager --no-daemon
iainmel+ 16825 0.0 0.0 437200 7592 ? Sl 12:30 0:00 /usr/lib/gvfs/gvfsd-network --spawner :1.22 /org/gtk/gvfs/exec_spaw/1
root 25333 0.0 0.0 25656 6184 ? S 13:54 0:00 /sbin/dhclient -d -q -sf /usr/lib/NetworkManager/nm-dhcp-helper -pf /run/dhclient-wlxf81a6721bb82.pid -lf /var/lib/NetworkManager/dhclient-3a19f5eb-5a9a-463e-8736-b458dc9b2d0f-wlxf81a6721bb82.lease -cf /var/lib/NetworkManager/dhclient-wlxf81a6721bb82.conf wlxf81a6721bb82
iainmel+ 27650 0.0 0.0 14428 1084 pts/0 S+ 14:13 0:00 grep --color=auto -E wpa|icd|etwork
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlxf81a6721bb82
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 wlxf81a6721bb82
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlxf81a6721bb82
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
# 127.0.0.53 is the systemd-resolved stub resolver.
# run "systemd-resolve --status" to see details about the actual nameservers.

nameserver 127.0.0.53
search lan
total 225627
    2 drwxr-xr-x 5 root root 4096 Jun 25 09:35 .
    2 drwxr-xr-x 24 root root 4096 Jun 12 08:57 ..
   23 -rw-r--r-- 1 root root 1501474 Mar 14 10:38 abi-4.13.0-38-generic
   14 -rw-r--r-- 1 root root 1537177 May 15 06:41 abi-4.15.0-22-generic
   31 -rw-r--r-- 1 root root 1537050 May 23 17:54 abi-4.15.0-23-generic
   24 -rw-r--r-- 1 root root 213212 Mar 14 10:38 config-4.13.0-38-generic
   18 -rw-r--r-- 1 root root 216807 May 15 06:41 config-4.15.0-22-generic
   32 -rw-r--r-- 1 root root 216807 May 23 17:54 config-4.15.0-23-generic
    1 drwx------ 3 root root 4096 Jan 1 1970 efi
65538 drwxr-xr-x 5 root root 1024 Jun 15 09:28 grub
   30 -rw-r--r-- 1 root root 13817378 May 30 09:41 initrd.img-4.10.0-19-generic
   12 -rw-r--r-- 1 root root 53565636 May 30 09:41 initrd.img-4.13.0-38-generic
   35 -rw-r--r-- 1 root root 56749885 Jun 12 08:57 initrd.img-4.15.0-22-generic
   29 -rw-r--r-- 1 root root 56886704 Jun 25 09:35 initrd.img-4.15.0-23-generic
   11 drwx------ 2 root root 12288 Apr 14 2017 lost+found
   15 -rw-r--r-- 1 root root 182704 Jan 28 2016 memtest86+.bin
   16 -rw-r--r-- 1 root root 184380 Jan 28 2016 memtest86+.elf
   17 -rw-r--r-- 1 root root 184840 Jan 28 2016 memtest86+_multiboot.bin
   25 -rw-r--r-- 1 root root 2860 Mar 14 10:38 retpoline-4.13.0-38-generic
   19 -rw-r--r-- 1 root root 0 May 15 06:41 retpoline-4.15.0-22-generic
   33 -rw-r--r-- 1 root root 0 May 23 17:54 retpoline-4.15.0-23-generic
   21 -rw------- 1 root root 3881548 Mar 14 10:38 System.map-4.13.0-38-generic
   13 -rw------- 1 root root 4039542 May 15 06:41 System.map-4.15.0-22-generic
   22 -rw------- 1 root root 4039393 May 23 17:54 System.map-4.15.0-23-generic
   26 -rw------- 1 root root 7866128 Mar 14 10:38 vmlinuz-4.13.0-38-generic
   27 -rw------- 1 root root 7868056 Apr 11 09:33 vmlinuz-4.13.0-38-generic.efi.signed
   20 -rw------- 1 root root 8253176 May 17 07:12 vmlinuz-4.15.0-22-generic
   34 -rw------- 1 root root 8257272 May 23 18:49 vmlinuz-4.15.0-23-generic
Support status summary of 'mellis-no-consultingroom1':

You have 1722 packages (76.6%) supported until April 2023 (Canonical - 5y)
You have 396 packages (17.6%) supported until April 2021 (Community - 3y)
You have 1 packages (0.0%) supported until January 2019 (Community - 9m)

You have 13 packages (0.6%) that can not/no longer be downloaded
You have 117 packages (5.2%) that are unsupported

Run with --show-unsupported, --show-supported or --show-all to see more details
Downloaded daily snapshot dated 2018-06-29 03:15:02
--2018-07-11 14:13:07-- http://www.linux-usb.org/usb.ids
Resolving www.linux-usb.org (www.linux-usb.org)... 216.105.38.10
Connecting to www.linux-usb.org (www.linux-usb.org)|216.105.38.10|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 597721 (584K) [text/plain]
Saving to: ‘/var/lib/usbutils/usb.ids.new’

/var/lib/usbutils/u 100%[===================>] 583.71K 711KB/s in 0.8s

2018-07-11 14:13:10 (711 KB/s) - ‘/var/lib/usbutils/usb.ids.new’ saved [597721/597721]

Done.
Module Size Used by
kpatch_livepatch_Ubuntu_4_15_0_23_25_generic_40 32768 1
ccm 20480 3
nls_iso8859_1 16384 2
usblp 20480 0
arc4 16384 2
ath9k_htc 77824 0
ath9k_common 36864 1 ath9k_htc
ath9k_hw 471040 2 ath9k_htc,ath9k_common
joydev 24576 0
intel_rapl 20480 0
x86_pkg_temp_thermal 16384 0
intel_powerclamp 16384 0
coretemp 16384 0
kvm 593920 0
ath 28672 3 ath9k_htc,ath9k_hw,ath9k_common
mac80211 778240 1 ath9k_htc
cfg80211 622592 4 ath9k_htc,mac80211,ath,ath9k_common
snd_hda_codec_realtek 102400 1
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 49152 1
snd_hda_intel 40960 10
snd_hda_codec 126976 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_core 81920 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hwdep 20480 1 snd_hda_codec
snd_pcm 98304 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
input_leds 16384 0
irqbypass 16384 1 kvm
intel_cstate 20480 0
eeepc_wmi 16384 0
intel_rapl_perf 16384 0
asus_wmi 28672 1 eeepc_wmi
wmi_bmof 16384 0
sparse_keymap 16384 1 asus_wmi
serio_raw 16384 0
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 65536 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 32768 2 snd_seq,snd_pcm
snd 81920 31 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
mei_me 40960 0
mei 90112 1 mei_me
mac_hid 16384 0
soundcore 16384 1 snd
lpc_ich 24576 0
shpchp 36864 0
sch_fq_codel 20480 6
parport_pc 36864 1
ppdev 20480 0
lp 20480 0
parport 49152 3 lp,parport_pc,ppdev
ip_tables 28672 0
x_tables 40960 1 ip_tables
autofs4 40960 2
algif_skcipher 16384 0
af_alg 24576 1 algif_skcipher
hid_generic 16384 0
usbhid 49152 0
hid 118784 3 hid_generic,usbhid
dm_crypt 36864 2
uas 24576 0
usb_storage 69632 2 uas
crct10dif_pclmul 16384 0
crc32_pclmul 16384 0
ghash_clmulni_intel 16384 0
pcbc 16384 0
mxm_wmi 16384 0
radeon 1470464 27
aesni_intel 188416 6
pata_acpi 16384 0
pata_marvell 16384 0
aes_x86_64 20480 1 aesni_intel
crypto_simd 16384 1 aesni_intel
glue_helper 16384 1 aesni_intel
i2c_algo_bit 16384 1 radeon
cryptd 24576 5 crypto_simd,ghash_clmulni_intel,aesni_intel
ttm 106496 1 radeon
drm_kms_helper 167936 1 radeon
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
firewire_ohci 40960 0
sysimgblt 16384 1 drm_kms_helper
ahci 36864 3
fb_sys_fops 16384 1 drm_kms_helper
r8169 86016 0
libahci 32768 1 ahci
mii 16384 1 r8169
drm 401408 17 radeon,ttm,drm_kms_helper
firewire_core 65536 1 firewire_ohci
crc_itu_t 16384 1 firewire_core
wmi 24576 3 asus_wmi,wmi_bmof,mxm_wmi
video 40960 1 asus_wmi

Question information

Language:
English Edit question
Status:
Expired
For:
Ubuntu gnome-nettool Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
actionparsnip (andrew-woodhead666) said :
#3

Seems the device is USB based. Have you tried a different USB port?

Revision history for this message
Launchpad Janitor (janitor) said :
#4

This question was expired because it remained in the 'Needs information' state without activity for the last 15 days.