phy0 -> rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff] -> UNCLAIMED Wireless Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b2] (rev 73) not working on Lenovo U530 touch laptop (20289 LENOVO_MT_20289) in Ubuntu 12.04.4 LTS
I'm still pretty new to switching to linux, and I just installed Ubuntu 12.04 onto my Lenovo U530 touch laptop, and am currently running into issues with installing the right wireless driver for it. I downloaded the iwlwifi-
Question information
- Language:
- English Edit question
- Status:
- Solved
- Assignee:
- No assignee Edit question
- Solved by:
- Mark Rijckenberg
- Solved:
- Last query:
- Last reply:
Related bugs
Related FAQ:
None Link to a FAQ
Revision history for this message
|
#1 |
Connect to a wired connection and run updates. The system is movable and home grade routers have Ethernet ports.
You can run updates in a terminal (Press CTRL+ALT+T) and run:
sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
Reboot to test
Revision history for this message
|
#2 |
Please first connect your network card to the wireless router using an ethernet cable (also known as a LAN cable) and apply all updates.
In order to gather essential troubleshooting information about your wireless card, please follow this procedure:
Step 1
In the Ubuntu Terminal console , make sure that unlimited scrolling is enabled:
click on Edit > Profiles > "Default" profile > Scrolling. Choose "Unlimited" as scrolling option. Click Close and Close again.
If you are using the Gnome interface, open the Terminal console via "Applications-
If you are using the Unity interface (default graphical user interface in Ubuntu), use the 'search' function on the dash. Or you can click on the 'More Apps' button, click on the 'See more results' by the installed section, and find it in that list of applications. A third way, available after you click on the 'More Apps' button, is to go to the search bar, and see that the far right end of it says 'All Applications'. You then click on that, and you'll see the full list. Then you can go to Accessories > Terminal after that.
So the methods in Unity are:
Press CTRL-ALT-T key combination.
Dash > Search for Terminal
Dash > More Apps > 'See More Results' > Terminal
Dash > More Apps > Accessories > Terminal
Step 2
Please copy-paste the following diagnostic command from the
https:/
website using a web browser (like Google Chromium or Mozilla Firefox) into the Linux Terminal. The command STARTS with the word sudo and ENDS with the word lsmod. So please copy-paste the ENTIRE diagnostic command below from the web browser into a Terminal, press <enter>, then enter password when sudo asks for password, then press enter again.
Tip: If you have a wheel mouse or 3 button mouse you do not need to type commands into the Terminal. Highlight the diagnostic command written on the page. Move your cursor anywhere in the Terminal and press the wheel or middle button. Automatic Copy and paste! No spelling mistakes! No Typos! No other errors!
sudo apt-get update; sudo apt-get install hwinfo grep rfkill; sudo lshw -C network; rfkill list; sudo iwlist scan | egrep -i 'chan|ssid'; cat /etc/network/
Step 3
Please do NOT attempt to send any attachment(s). Please copy/paste the full terminal output at this location:
https:/
The troubleshooters at Launchpad need to see the full Terminal output from running the above diagnostic command.
Revision history for this message
|
#4 |
Hit http://
Get:1 http://
Hit http://
Get:2 http://
Hit http://
Get:3 http://
Hit http://
Get:4 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Get:5 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:6 http://
Get:7 http://
Get:8 http://
Get:9 http://
Get:10 http://
Get:11 http://
Get:12 http://
Get:13 http://
Get:14 http://
Ign http://
Ign http://
Get:15 http://
Get:16 http://
Get:17 http://
Get:18 http://
Get:19 http://
Get:20 http://
Get:21 http://
Get:22 http://
Get:23 http://
Get:24 http://
Get:25 http://
Get:26 http://
Hit http://
Get:27 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:28 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Fetched 3,768 kB in 4s (845 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
rfkill is already the newest version.
hwinfo is already the newest version.
The following packages were automatically installed and are no longer required:
gir1.
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: eth0
version: 10
serial: 08:9e:01:e3:f3:b9
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
resources: irq:60 ioport:
*-network UNCLAIMED
description: Network controller
product: Wireless 7260
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:02:00.0
version: 73
width: 64 bits
clock: 33MHz
resources: memory:
1: ideapad_wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
2: ideapad_bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
4: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
eth0 Interface doesn't support scanning.
lo Interface doesn't support scanning.
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:0123]
Kernel driver in use: r8169
--
02:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b2] (rev 73)
Subsystem: Intel Corporation Wireless-N 7260 [8086:4262]
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 007: ID 03eb:8827 Atmel Corp.
Bus 002 Device 003: ID 05dc:a720 Lexar Media, Inc.
Bus 002 Device 004: ID 13d3:5172 IMC Networks
Bus 002 Device 005: ID 8087:07dc Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
RUNNING STATE WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN
running connected enabled enabled enabled enabled
H/W path Device Class Description
=======
/0 bus Plum 5A
/0/0 memory 128KiB BIOS
/0/4 processor Intel(R) Core(TM) i7-4500U CPU @ 1.80G
/0/4/b memory 32KiB L1 cache
/0/4/c memory 256KiB L2 cache
/0/4/d memory 4MiB L3 cache
/0/a memory 32KiB L1 cache
/0/2a memory 8GiB System Memory
/0/2a/0 memory DIMM [empty]
/0/2a/1 memory DIMM [empty]
/0/2a/2 memory 8GiB SODIMM DDR3 Synchronous 1600 MHz
/0/2a/3 memory DIMM [empty]
/0/100 bridge Haswell-ULT DRAM Controller
/0/100/2 display Haswell-ULT Integrated Graphics Contro
/0/100/3 multimedia Intel Corporation
/0/100/14 bus Lynx Point-LP USB xHCI HC
/0/100/16 communication Lynx Point-LP HECI #0
/0/100/1b multimedia Lynx Point-LP HD Audio Controller
/0/100/1c bridge Lynx Point-LP PCI Express Root Port 1
/0/100/1c/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit
/0/100/1c.2 bridge Lynx Point-LP PCI Express Root Port 3
/0/100/1c.2/0 network Wireless 7260
/0/100/1c.3 bridge Lynx Point-LP PCI Express Root Port 4
/0/100/1d bus Lynx Point-LP USB EHCI #1
/0/100/1f bridge Lynx Point-LP LPC Controller
/0/100/1f.2 storage Lynx Point-LP SATA Controller 1 [AHCI
/0/100/1f.3 bus Lynx Point-LP SMBus Controller
/0/1 scsi2 storage
/0/1/0.0.0 /dev/sda disk 500GB ST500LM000-1EJ16
/0/1/0.0.0/1 /dev/sda1 volume 999MiB Windows NTFS volume
/0/1/0.0.0/2 /dev/sda2 volume 259MiB Windows FAT volume
/0/1/0.0.0/3 /dev/sda3 volume 999MiB Windows FAT volume
/0/1/0.0.0/4 /dev/sda4 volume 127MiB Windows reserved partition
/0/1/0.0.0/5 /dev/sda5 volume 228GiB Windows NTFS volume
/0/1/0.0.0/6 /dev/sda6 volume 349MiB Windows NTFS volume
/0/1/0.0.0/7 /dev/sda7 volume 24GiB Windows NTFS volume
/0/1/0.0.0/8 /dev/sda8 volume 14GiB Windows NTFS volume
/0/1/0.0.0/9 /dev/sda9 volume 1023KiB EFI partition
/0/1/0.0.0/a /dev/sda10 volume 187GiB EXT4 volume
/0/1/0.0.0/b /dev/sda11 volume 7947MiB Linux swap volume
/0/2 scsi0 storage
/0/2/0.0.0 /dev/sdb disk 2013MB SCSI Disk
/0/2/0.0.0/1 /dev/sdb1 volume 1911MiB Windows FAT volume
/1 power CRB Battery 0
/2 power OEM_Define5
Linux andrew-
[ 0.000000] No AGP bridge found
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-
[ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20121018/
[ 0.000000] No NUMA configuration found
[ 0.000000] No AGP bridge found
[ 0.000000] [<ffffffff81059
[ 0.000000] [<ffffffff81059
[ 0.175948] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.196082] ACPI: No dock devices found.
[ 0.207485] pci 0000:02:00.0: [8086:08b2] type 00 class 0x028000
[ 0.207526] pci 0000:02:00.0: reg 10: [mem 0xb2400000-
[ 0.207701] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.219968] ACPI: bus type usb registered
[ 0.220026] usbcore: registered new interface driver usbfs
[ 0.220077] usbcore: registered new interface driver hub
[ 0.220150] usbcore: registered new device driver usb
[ 0.228766] Switching to clocksource hpet
[ 0.239814] pnp: PnP ACPI: found 9 devices
[ 0.637057] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.639081] input: Lid Switch as /devices/
[ 0.640053] ACPI: Lid Switch [LID0]
[ 0.668237] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.668284] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.668349] usb usb1: Product: EHCI Host Controller
[ 0.668407] usb usb1: Manufacturer: Linux 3.8.0-35-generic ehci_hcd
[ 0.668452] usb usb1: SerialNumber: 0000:00:1d.0
[ 0.668626] hub 1-0:1.0: USB hub found
[ 0.669300] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.669347] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.669450] usb usb2: Product: xHCI Host Controller
[ 0.669493] usb usb2: Manufacturer: Linux 3.8.0-35-generic xhci_hcd
[ 0.669539] usb usb2: SerialNumber: 0000:00:14.0
[ 0.669676] hub 2-0:1.0: USB hub found
[ 0.670337] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.670384] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.670458] usb usb3: Product: xHCI Host Controller
[ 0.670518] usb usb3: Manufacturer: Linux 3.8.0-35-generic xhci_hcd
[ 0.670564] usb usb3: SerialNumber: 0000:00:14.0
[ 0.670697] hub 3-0:1.0: USB hub found
[ 0.682301] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: c77318d5b035f7c
[ 0.689265] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.979760] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.112006] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.112057] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.112357] hub 1-1:1.0: USB hub found
[ 1.279299] usb 2-1: new full-speed USB device number 2 using xhci_hcd
[ 1.304454] usb 2-1: New USB device found, idVendor=03eb, idProduct=8827
[ 1.304505] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.304552] usb 2-1: Product: Atmel maXTouch Digitizer
[ 1.304595] usb 2-1: Manufacturer: Atmel
[ 1.419082] usb 2-2: new high-speed USB device number 3 using xhci_hcd
[ 1.437168] usb 2-2: New USB device found, idVendor=05dc, idProduct=a720
[ 1.437219] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.437267] usb 2-2: Product: USB Flash Drive
[ 1.437307] usb 2-2: Manufacturer: UFD
[ 1.437346] usb 2-2: SerialNumber: 415DEF041846050
[ 1.437484] usb 2-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 1.437553] usb 2-2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[ 1.590857] Switching to clocksource tsc
[ 1.602798] usb 2-5: new high-speed USB device number 4 using xhci_hcd
[ 1.648107] usb 2-5: New USB device found, idVendor=13d3, idProduct=5172
[ 1.648159] usb 2-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.648206] usb 2-5: Product: Lenovo EasyCamera
[ 1.648247] usb 2-5: Manufacturer: Azurewave
[ 1.648287] usb 2-5: SerialNumber: NULL
[ 1.814409] usb 2-6: new full-speed USB device number 5 using xhci_hcd
[ 1.831423] usb 2-6: New USB device found, idVendor=8087, idProduct=07dc
[ 1.831471] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 156.293871] ACPI Error: Method parse/execution failed [\_SB_.
[ 156.294012] ACPI Error: Method parse/execution failed [\_SB_.BAT1.UPBI] (Node ffff880253ff4848), AE_AML_
[ 156.294143] ACPI Error: Method parse/execution failed [\_SB_.BAT1._BIF] (Node ffff880253ff47f8), AE_AML_
[ 156.348625] r8169 0000:01:00.0 eth0: RTL8168b/8111b at 0xffffc90000c74000, 08:9e:01:e3:f3:b9, XID 10900880 IRQ 60
[ 156.348690] r8169 0000:01:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 156.350888] usbcore: registered new interface driver usbhid
[ 156.350930] usbhid: USB HID core driver
[ 156.356161] scsi0 : usb-storage 2-2:1.0
[ 156.359134] usbcore: registered new interface driver usb-storage
[ 156.452858] hid-generic 0003:03EB:
[ 157.359239] sd 0:0:0:0: [sdb] No Caching mode page found
[ 157.362135] sd 0:0:0:0: [sdb] No Caching mode page found
[ 157.364466] sd 0:0:0:0: [sdb] No Caching mode page found
[ 161.192697] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 161.532823] usbcore: registered new interface driver btusb
[ 161.978513] input: Atmel Atmel maXTouch Digitizer as /devices/
[ 161.978809] hid-multitouch 0003:03EB:
[ 161.992401] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f01)
[ 162.236789] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (13d3:5172)
[ 162.238013] input: Lenovo EasyCamera as /devices/
[ 162.238144] usbcore: registered new interface driver uvcvideo
[ 162.834973] IPv6: ADDRCONF(
[ 168.319447] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/
[ 168.348441] input: HDA Intel PCH Mic as /devices/
[ 168.348504] input: HDA Intel PCH Headphone as /devices/
[ 299.362342] mce: [Hardware Error]: Machine check events logged
[25523.707900] lp: driver loaded but no devices found
[25524.170817] EXT4-fs (sda10): re-mounted. Opts: errors=remount-ro
[25525.007603] type=1400 audit(139119374
[25525.008029] type=1400 audit(139119374
[25525.642270] r8169 0000:01:00.0 eth0: link down
[25525.642586] IPv6: ADDRCONF(
[25525.642794] IPv6: ADDRCONF(
[25845.678912] usb 2-3: new high-speed USB device number 6 using xhci_hcd
[25845.713384] usb 2-3: New USB device found, idVendor=148f, idProduct=3070
[25845.713393] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[25845.713398] usb 2-3: Product: 802.11 n WLAN
[25845.713402] usb 2-3: Manufacturer: Ralink
[25845.713405] usb 2-3: SerialNumber: 1.0
[25845.813819] cfg80211: Calling CRDA to update world regulatory domain
[25846.010573] usb 2-3: reset high-speed USB device number 6 using xhci_hcd
[25846.049912] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[25846.050791] usbcore: registered new interface driver rt2800usb
[25846.400556] IPv6: ADDRCONF(
[25846.400790] IPv6: ADDRCONF(
[25849.860852] wlan2: authenticate with 74:d0:2b:42:1c:10
[25849.911365] wlan2: send auth to 74:d0:2b:42:1c:10 (try 1/3)
[25849.912846] wlan2: authenticated
[25849.916278] wlan2: associate with 74:d0:2b:42:1c:10 (try 1/3)
[25849.919491] wlan2: RX AssocResp from 74:d0:2b:42:1c:10 (capab=0x411 status=0 aid=2)
[25849.922779] wlan2: associated
[25849.922801] IPv6: ADDRCONF(
[26065.604206] usb 2-3: USB disconnect, device number 6
[26067.215308] phy0 -> rt2800_
[26067.215704] wlan2: deauthenticating from 74:d0:2b:42:1c:10 by local choice (reason=3)
[26067.247526] cfg80211: Calling CRDA to update world regulatory domain
[26099.859558] usb 2-1: USB disconnect, device number 2
[26105.749824] PM: Device 00:06 failed to resume: error -19
[26105.954248] usb 2-5: reset high-speed USB device number 4 using xhci_hcd
[26106.082135] usb 2-6: reset full-speed USB device number 5 using xhci_hcd
[26106.099242] btusb 2-6:1.0: no reset_resume for driver btusb?
[26106.099244] btusb 2-6:1.1: no reset_resume for driver btusb?
[26108.961380] usb 2-1: new full-speed USB device number 7 using xhci_hcd
[26108.986742] usb 2-1: New USB device found, idVendor=03eb, idProduct=8827
[26108.986745] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[26108.986746] usb 2-1: Product: Atmel maXTouch Digitizer
[26108.986748] usb 2-1: Manufacturer: Atmel
[26108.996176] input: Atmel Atmel maXTouch Digitizer as /devices/
[26108.996302] hid-multitouch 0003:03EB:
[26109.000787] hid-generic 0003:03EB:
[26110.320185] r8169 0000:01:00.0 eth0: link down
[26110.320211] r8169 0000:01:00.0 eth0: link down
[26110.320232] IPv6: ADDRCONF(
[26111.950065] r8169 0000:01:00.0 eth0: link up
[26111.950082] IPv6: ADDRCONF(
[26209.647110] mce: [Hardware Error]: Machine check events logged
[26237.333886] r8169 0000:01:00.0 eth0: link down
[26241.580903] r8169 0000:01:00.0 eth0: link up
[26319.306052] r8169 0000:01:00.0 eth0: link down
[26323.861878] IPv6: ADDRCONF(
[26423.815652] r8169 0000:01:00.0 eth0: link down
[26423.815711] r8169 0000:01:00.0 eth0: link down
[26423.815716] IPv6: ADDRCONF(
[26423.819074] r8169 0000:01:00.0 eth0: link down
[26425.449042] r8169 0000:01:00.0 eth0: link up
[26425.449058] IPv6: ADDRCONF(
Release Date: 09/06/2013
Manufacturer: LENOVO
Product Name: 20289
Serial Number: QTF1IB33600373
Manufacturer: LENOVO
Product Name: Plum 5A
Serial Number: QB07308634
Manufacturer: LENOVO
Serial Number: QB07308634
Manufacturer: Intel(R) Corporation
Serial Number: To Be Filled By O.E.M.
Port Type: Serial Port 16550A Compatible
String 1: String1 for Original Equipment Manufacturer
String 2: String2 for Original Equipment Manufacturer
String 3: String3 for Original Equipment Manufacturer
String 4: String4 for Original Equipment Manufacturer
String 5: String5 for Original Equipment Manufacturer
Option 1: String1 for Type12 Equipment Manufacturer
Option 2: String2 for Type12 Equipment Manufacturer
Option 3: String3 for Type12 Equipment Manufacturer
Option 4: String4 for Type12 Equipment Manufacturer
Manufacturer: Empty
Serial Number: Empty
Manufacturer: Empty
Serial Number: Empty
Manufacturer: Unknown
Serial Number: 1985C65F
Manufacturer: Empty
Serial Number: Empty
Manufacturer: -Virtual Battery 0-
Manufacture Date: 07/07/2010
Serial Number: Battery 0
Manufacturer: OEM_Define2
Serial Number: OEM_Define3
eth0 no wireless extensions.
lo no wireless extensions.
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
WimaxEnabled=true
> hal.1: read hal dataprocess 4637: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
21: PCI 100.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.rZKKYY_k0r4
Parent ID: z8Q3.MZR3yaqgduD
SysFS ID: /devices/
SysFS BusID: 0000:01:00.0
Hardware Class: network
Model: "Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8168 "RTL8111/8168B PCI Express Gigabit Ethernet controller"
SubVendor: pci 0x17aa "Lenovo"
SubDevice: pci 0x3801
Revision: 0x10
Driver: "r8169"
Driver Modules: "r8169"
Device File: eth0
I/O Ports: 0x4000-0x4fff (rw)
Memory Range: 0xb2504000-
Memory Range: 0xb2500000-
IRQ: 60 (8310 events)
HW Address: 08:9e:01:e3:f3:b9
Link detected: yes
Module Alias: "pci:v000010ECd
Driver Info #0:
Driver Status: r8169 is active
Driver Activation Cmd: "modprobe r8169"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #14 (PCI bridge)
22: PCI 200.0: 0280 Network controller
[Created at pci.318]
Unique ID: B35A.JPMgCtgalTC
Parent ID: hoOk.QDD3tsIVkQF
SysFS ID: /devices/
SysFS BusID: 0000:02:00.0
Hardware Class: network
Model: "Intel Network controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x08b2
SubVendor: pci 0x8086 "Intel Corporation"
SubDevice: pci 0x4262
Revision: 0x73
Memory Range: 0xb2400000-
IRQ: 11 (no events)
Module Alias: "pci:v00008086d
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)
Warning: bad ps syntax, perhaps a bogus '-'? See http://
root 1510 0.0 0.0 238024 5920 ? Ssl 10:42 0:00 NetworkManager
root 2559 0.0 0.0 31804 2396 ? Ss 10:47 0:00 /sbin/wpa_
nobody 2565 0.0 0.0 33028 1508 ? S 10:47 0:00 /usr/sbin/dnsmasq --no-resolv --keep-
root 4323 0.0 0.0 7272 1560 ? S 11:13 0:00 /sbin/dhclient -d -4 -sf /usr/lib/
andrew 4651 0.0 0.0 13592 928 pts/2 S+ 11:14 0:00 egrep --color=auto wpa|icd|etwork
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 76.178.144.1 0.0.0.0 UG 0 0 0 eth0
76.178.144.0 0.0.0.0 255.255.240.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 127.0.0.1
search natnow.rr.com
total 51064
7864321 drwxr-xr-x 3 root root 4096 Jan 31 03:20 .
2 drwxr-xr-x 24 root root 4096 Jan 31 03:20 ..
7864324 -rw-r--r-- 1 root root 919604 Aug 14 09:42 abi-3.8.
7864545 -rw-r--r-- 1 root root 919810 Jan 30 09:47 abi-3.8.
7864325 -rw-r--r-- 1 root root 154969 Aug 14 09:42 config-
7864541 -rw-r--r-- 1 root root 154959 Jan 30 09:47 config-
7864322 drwxr-xr-x 3 root root 12288 Jan 31 03:20 grub
7864330 -rw-r--r-- 1 root root 16206506 Jan 31 03:19 initrd.
7864546 -rw-r--r-- 1 root root 16273502 Jan 31 03:20 initrd.
7864326 -rw-r--r-- 1 root root 176764 Nov 27 2011 memtest86+.bin
7864327 -rw-r--r-- 1 root root 178944 Nov 27 2011 memtest86+
7864323 -rw------- 1 root root 3187899 Aug 14 09:42 System.
7864543 -rw------- 1 root root 3192757 Jan 30 09:47 System.
7864329 -rw-r--r-- 1 root root 5426432 Jan 31 02:54 vmlinuz-
7864544 -rw------- 1 root root 5453616 Jan 30 09:47 vmlinuz-
Support status summary of 'andrew-
You have 51 packages (3.7%) supported until July 2015 (18m)
You have 2 packages (0.1%) supported until October 2013 (18m)
You have 1323 packages (95.9%) supported until April 2017 (5y)
You have 0 packages (0.0%) that can not/no-longer be downloaded
You have 4 packages (0.3%) that are unsupported
Run with --show-unsupported, --show-supported or --show-all to see more details
Module Size Used by
arc4 12573 0
rt2800usb 27045 0
rt2800lib 67510 1 rt2800usb
crc_ccitt 12707 1 rt2800lib
rt2x00usb 20808 1 rt2800usb
rt2x00lib 55643 3 rt2800usb,
mac80211 631450 3 rt2800lib,
cfg80211 526422 2 rt2x00lib,mac80211
nls_iso8859_1 12713 1
bnep 18399 2
rfcomm 47922 12
parport_pc 28284 0
ppdev 17113 0
lp 17799 0
parport 46562 3 parport_pc,ppdev,lp
snd_hda_
snd_hda_codec_hdmi 37463 1
i915 621477 0
uvcvideo 82214 0
videobuf2_core 40815 1 uvcvideo
coretemp 13596 0
videodev 130172 2 uvcvideo,
kvm_intel 137928 0
drm_kms_helper 49597 1 i915
kvm 456261 1 kvm_intel
drm 287796 2 i915,drm_kms_helper
videobuf2_vmalloc 13056 1 uvcvideo
videobuf2_memops 13202 1 videobuf2_vmalloc
joydev 17613 0
hid_multitouch 17407 0
snd_hda_intel 44339 5
snd_hda_codec 141761 3 snd_hda_
snd_hwdep 13668 1 snd_hda_codec
snd_pcm 102477 3 snd_hda_
snd_seq_midi 13324 0
ghash_clmulni_intel 13259 0
aesni_intel 55495 0
snd_rawmidi 30417 1 snd_seq_midi
snd_seq_midi_event 14899 1 snd_seq_midi
i2c_algo_bit 13564 1 i915
ideapad_laptop 18596 0
video 19652 1 i915
wmi 19256 0
snd_seq 61930 2 snd_seq_
snd_timer 29989 2 snd_pcm,snd_seq
sparse_keymap 13890 1 ideapad_laptop
mac_hid 13253 0
btusb 22431 0
ablk_helper 13597 1 aesni_intel
snd_seq_device 14497 3 snd_seq_
psmouse 97902 0
mei 45974 0
bluetooth 247324 24 bnep,rfcomm,btusb
cryptd 20530 3 ghash_clmulni_
lrw 13323 1 aesni_intel
snd 69533 20 snd_hda_
aes_x86_64 17255 1 aesni_intel
xts 12951 1 aesni_intel
gf128mul 14951 2 lrw,xts
microcode 23075 0
lpc_ich 17144 0
serio_raw 13215 0
soundcore 12680 1 snd
snd_page_alloc 18798 2 snd_hda_
hid_generic 12540 0
usb_storage 61749 1
ahci 25879 2
libahci 31636 1 ahci
r8169 68904 0
usbhid 47346 1 hid_multitouch
hid 105826 3 hid_multitouch,
Revision history for this message
|
#5 |
Please read this:
https:/
I suggest testing the newest mainline kernel here:
http://
Revision history for this message
|
#6 |
Thanks Mark Rijckenberg, that solved my question.