Can't get Wi-fi connection in Lubuntu 12.04
Machine is Mac G5 Tower with an Airport Extreme Card BCM 4306 14e4:4320 rev3
This is the output from the terminal
mike@mike-
[sudo] password for mike:
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
rfkill is already the newest version.
hwinfo is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
*-network
description: Network controller
product: BCM4306 802.11b/g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 1
bus info: pci@0001:02:01.0
version: 03
width: 32 bits
clock: 33MHz
resources: irq:57 memory:
*-network
description: Ethernet interface
product: K2 GMAC (Sun GEM)
vendor: Apple Inc.
physical id: f
bus info: pci@0001:04:0f.0
logical name: eth0
version: 00
serial: 00:0d:93:4a:84:5a
size: 100Mbit/s
capacity: 1Gbit/s
width: 32 bits
clock: 66MHz
resources: irq:41 memory:
*-network DISABLED
description: Wireless interface
physical id: 1
logical name: wlan0
serial: 00:11:24:aa:68:f6
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
lo Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
eth0 Interface doesn't support scanning.
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
0001:02:01.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
Subsystem: Apple Inc. AirPort Extreme [106b:004e]
Kernel driver in use: b43-pci-bridge
--
0001:04:0f.0 Ethernet controller [0200]: Apple Inc. K2 GMAC (Sun GEM) [106b:004c]
Kernel driver in use: gem
Kernel modules: sungem
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 05ac:9115 Apple, Inc.
Bus 005 Device 003: ID 05ac:1003 Apple, Inc. Hub in Pro Keyboard [Mitsumi, A1048]
Bus 005 Device 004: ID 05ac:1101 Apple, Inc. Speakers
Bus 005 Device 005: ID 05ac:9215 Apple, Inc.
Bus 005 Device 006: ID 05ac:0306 Apple, Inc. Optical USB Mouse [Fujitsu]
Bus 005 Device 007: ID 05ac:020c Apple, Inc. Extended Keyboard [Mitsumi]
The program 'nmcli' is currently not installed. You can install it by typing:
sudo apt-get install network-manager
H/W path Device Class Description
=======
/0 bus Motherboard
/0/0 /proc/device-tree memory
/0/1 processor PPC970, altivec supported
/0/1/0 memory 32KiB L1 Cache
/0/1/1 memory 512KiB L2 Cache (unified)
/0/2 processor PPC970, altivec supported
/0/2/0 memory 32KiB L1 Cache
/0/2/1 memory 512KiB L2 Cache (unified)
/0/3 memory 1952MiB System memory
/0/100 bridge U3H AGP Bridge
/0/100/10 display NV34 [GeForce FX 5200 Ultra]
/0/101 bridge U3 HT Bridge
/0/101/1 bridge AMD-8131 PCI-X Bridge
/0/101/2 bridge AMD-8131 PCI-X Bridge
/0/101/3 bridge K2 HT-PCI Bridge
/0/101/3/7 generic K2 KeyLargo Mac/IO
/0/101/3/8 bus K2 KeyLargo USB
/0/101/3/9 bus K2 KeyLargo USB
/0/101/4 bridge K2 HT-PCI Bridge
/0/101/4/1 network BCM4306 802.11b/g Wireless LAN
/0/101/4/b bus OHCI USB Controller
/0/101/4/b.1 bus OHCI USB Controller
/0/101/4/b.2 bus uPD72010x USB 2.0 Controller
/0/101/5 bridge K2 HT-PCI Bridge
/0/101/5/d scsi4 generic K2 ATA/100
/0/101/5/d/0.0.0 /dev/cdrom disk DVD-RW DVR-116D
/0/101/5/e bus K2 FireWire
/0/101/6 bridge K2 HT-PCI Bridge
/0/101/6/f eth0 network K2 GMAC (Sun GEM)
/0/101/7 bridge K2 HT-PCI Bridge
/0/101/7/c scsi0 storage K2 SATA
/0/101/7/c/0.0.0 /dev/sda disk 160GB ST3160023AS
/0/101/7/c/0.0.0/1 /dev/sda1 volume 31KiB Apple partition map
/0/101/7/c/0.0.0/2 /dev/sda2 volume 977KiB Apple Bootstrap
/0/101/7/c/0.0.0/3 /dev/sda3 volume 143GiB EXT4 volume
/0/101/7/c/0.0.0/4 /dev/sda4 volume 5719MiB Linux swap volume
/0/101/7/c/0.0.0/5 /dev/sda5 volume 24KiB Apple Free
/1 wlan0 network Wireless interface
Linux mike-desktop 3.2.0-55-
[ 0.000000] Found initrd at 0xc000000002400
[ 0.000000] Found U3 memory controller & host bridge @ 0xf8000000 revision: 0x35
[ 0.000000] Found a K2 mac-io controller, rev: 96, mapped at 0xd000080080041000
[ 0.000000] Found U3-AGP PCI host bridge. Firmware bus number: 240->255
[ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.032405] PowerMac SMP probe found 2 cpus
[ 0.090904] CPU Hotplug not supported by firmware - disabling.
[ 0.184860] opal: Node not found
[ 0.188209] i2c-core: driver [aat2870] using legacy suspend method
[ 0.188212] i2c-core: driver [aat2870] using legacy resume method
[ 0.188616] usbcore: registered new interface driver usbfs
[ 0.188644] usbcore: registered new interface driver hub
[ 0.188715] usbcore: registered new device driver usb
[ 0.189303] Switching to clocksource timebase
[ 0.497462] Frequency method: i2c/pfunc, Voltage method: i2c/pfunc
[ 0.722639] Console: switching to colour frame buffer device 128x48
[ 0.736649] fb0: Open Firmware frame buffer device on /pci@0,
[ 0.821697] hub 1-0:1.0: USB hub found
[ 0.897496] hub 2-0:1.0: USB hub found
[ 0.973529] hub 3-0:1.0: USB hub found
[ 1.049518] hub 4-0:1.0: USB hub found
[ 1.125973] hub 5-0:1.0: USB hub found
[ 1.126330] usbcore: registered new interface driver libusual
[ 1.561426] usb 5-1: new full-speed USB device number 2 using ohci_hcd
[ 1.767685] hub 5-1:1.0: USB hub found
[ 1.965427] usb 5-2: new full-speed USB device number 3 using ohci_hcd
[ 2.183682] hub 5-2:1.0: USB hub found
[ 2.251343] i2c i2c-0: therm_pm72: attach_adapter method is deprecated
[ 2.251352] i2c i2c-1: therm_pm72: attach_adapter method is deprecated
[ 2.251360] i2c i2c-2: therm_pm72: attach_adapter method is deprecated
[ 2.251368] i2c i2c-3: therm_pm72: attach_adapter method is deprecated
[ 2.251453] i2c i2c-4: therm_pm72: attach_adapter method is deprecated
[ 2.278594] usb 5-1.2: new full-speed USB device number 4 using ohci_hcd
[ 2.428092] gem 0001:04:0f.0: eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:4a:84:5a
[ 2.432226] b43-pci-bridge 0001:02:01.0: enabling device (0004 -> 0006)
[ 2.432287] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
[ 2.432295] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
[ 2.432302] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
[ 2.432310] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
[ 2.432317] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
[ 2.435897] ssb: Sonics Silicon Backplane found on PCI device 0001:02:01.0
[ 2.478599] usb 5-1.3: new low-speed USB device number 5 using ohci_hcd
[ 2.563838] input: Apple Computer, Inc. Speakers as /devices/
[ 2.564263] generic-usb 0003:05AC:
[ 2.564463] usbcore: registered new interface driver usbhid
[ 2.564468] usbhid: USB HID core driver
[ 5.320578] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 6.100374] ADDRCONF(
[ 8.738373] lp: driver loaded but no devices found
[ 10.112343] cfg80211: Calling CRDA to update world regulatory domain
[ 10.264066] usb_audio: Warning! Unlikely big volume range (=768), cval->res is probably wrong.
[ 10.264073] usb_audio: [2] FU [PCM Playback Volume] ch = 2, val = -12288/0/16
[ 10.337152] usbcore: registered new interface driver snd-usb-audio
[ 11.534703] Console: switching to colour dummy device 80x25
[ 11.709819] [drm] nouveau 0000:f0:10.0: ... BIOS signature not found
[ 11.709836] [drm] nouveau 0000:f0:10.0: ... BIOS signature not found
[ 11.749095] [drm] nouveau 0000:f0:10.0: BMP BIOS found
[ 11.749123] [drm] nouveau 0000:f0:10.0: Found Display Configuration Block version 2.2
[ 11.755513] i2c i2c-5: therm_pm72: attach_adapter method is deprecated
[ 11.928582] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[ 12.066283] cfg80211: World regulatory domain updated:
[ 12.066289] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.066294] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.066299] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.066303] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.066308] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.066312] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.224514] i2c i2c-6: therm_pm72: attach_adapter method is deprecated
[ 12.251184] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.252368] Registered led device: b43-phy0::tx
[ 12.252401] Registered led device: b43-phy0::rx
[ 12.252436] Registered led device: b43-phy0::radio
[ 12.427998] i2c i2c-7: therm_pm72: attach_adapter method is deprecated
[ 12.501293] Console: switching to colour frame buffer device 128x48
[ 12.605938] generic-usb 0003:05AC:
[ 12.605965] generic-usb 0003:05AC:
[ 12.606410] generic-usb 0003:05AC:
[ 12.682948] usb 5-2.1: new low-speed USB device number 6 using ohci_hcd
[ 12.811260] input: Fujitsu Component Apple Optical USB Mouse as /devices/
[ 12.811586] generic-usb 0003:05AC:
[ 12.886911] usb 5-2.3: new full-speed USB device number 7 using ohci_hcd
[ 13.013340] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/
[ 13.013631] generic-usb 0003:05AC:
[ 13.025056] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/
[ 13.027030] generic-usb 0003:05AC:
[ 18.373453] b43-phy0: Loading firmware version 508.1084 (2009-01-14 01:32:01)
[ 18.421524] b43-pci-bridge 0001:02:01.0: Warning: IOMMU window too big for device mask
[ 18.421531] b43-pci-bridge 0001:02:01.0: mask: 0x3fffffff, table end: 0x80000000
[ 18.421537] b43-phy0 ERROR: The machine/kernel does not support the required 30-bit DMA mask
[ 23.214596] gem 0001:04:0f.0: eth0: Found BCM5421-K2 PHY
[ 23.215298] ADDRCONF(
[ 26.349428] b43-phy0 ERROR: Microcode not responding
[ 26.349437] b43-phy0 ERROR: You must go to http://
[ 28.209439] b43-phy0: Loading firmware version 508.1084 (2009-01-14 01:32:01)
[ 28.257509] b43-pci-bridge 0001:02:01.0: Warning: IOMMU window too big for device mask
[ 28.257516] b43-pci-bridge 0001:02:01.0: mask: 0x3fffffff, table end: 0x80000000
[ 28.257521] b43-phy0 ERROR: The machine/kernel does not support the required 30-bit DMA mask
[ 34.221429] b43-phy0 ERROR: Microcode not responding
[ 34.221437] b43-phy0 ERROR: You must go to http://
[ 38.213446] b43-phy0: Loading firmware version 508.1084 (2009-01-14 01:32:01)
[ 38.261509] b43-pci-bridge 0001:02:01.0: Warning: IOMMU window too big for device mask
[ 38.261516] b43-pci-bridge 0001:02:01.0: mask: 0x3fffffff, table end: 0x80000000
[ 38.261521] b43-phy0 ERROR: The machine/kernel does not support the required 30-bit DMA mask
[ 74.969426] b43-phy0 ERROR: Microcode not responding
[ 74.969435] b43-phy0 ERROR: You must go to http://
[ 142.109469] b43-phy0: Loading firmware version 508.1084 (2009-01-14 01:32:01)
[ 142.161506] b43-pci-bridge 0001:02:01.0: Warning: IOMMU window too big for device mask
[ 142.161512] b43-pci-bridge 0001:02:01.0: mask: 0x3fffffff, table end: 0x80000000
[ 142.161517] b43-phy0 ERROR: The machine/kernel does not support the required 30-bit DMA mask
[ 194.225427] b43-phy0 ERROR: Microcode not responding
[ 194.225437] b43-phy0 ERROR: You must go to http://
[ 194.361445] b43-phy0: Loading firmware version 508.1084 (2009-01-14 01:32:01)
[ 194.413510] b43-pci-bridge 0001:02:01.0: Warning: IOMMU window too big for device mask
[ 194.413517] b43-pci-bridge 0001:02:01.0: mask: 0x3fffffff, table end: 0x80000000
[ 194.413523] b43-phy0 ERROR: The machine/kernel does not support the required 30-bit DMA mask
[ 194.821987] gem 0001:04:0f.0: eth0: Found BCM5421-K2 PHY
[ 194.822682] ADDRCONF(
[ 236.061446] b43-phy0 ERROR: Microcode not responding
[ 236.061456] b43-phy0 ERROR: You must go to http://
[ 237.897457] b43-phy0: Loading firmware version 508.1084 (2009-01-14 01:32:01)
[ 237.949510] b43-pci-bridge 0001:02:01.0: Warning: IOMMU window too big for device mask
[ 237.949517] b43-pci-bridge 0001:02:01.0: mask: 0x3fffffff, table end: 0x80000000
[ 237.949522] b43-phy0 ERROR: The machine/kernel does not support the required 30-bit DMA mask
[ 412.745649] gem 0001:04:0f.0: eth0: Link is up at 100 Mbps, full-duplex
[ 412.745768] gem 0001:04:0f.0: eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 412.746127] ADDRCONF(
[ 423.437419] eth0: no IPv6 routers present
[ 497.865436] b43-phy0 ERROR: Microcode not responding
[ 497.865446] b43-phy0 ERROR: You must go to http://
[ 501.585441] b43-phy0: Loading firmware version 508.1084 (2009-01-14 01:32:01)
[ 501.637512] b43-pci-bridge 0001:02:01.0: Warning: IOMMU window too big for device mask
[ 501.637519] b43-pci-bridge 0001:02:01.0: mask: 0x3fffffff, table end: 0x80000000
[ 501.637525] b43-phy0 ERROR: The machine/kernel does not support the required 30-bit DMA mask
[ 502.781436] b43-phy0 ERROR: Microcode not responding
[ 502.781445] b43-phy0 ERROR: You must go to http://
[ 503.121993] gem 0001:04:0f.0: eth0: Found BCM5421-K2 PHY
[ 503.122694] ADDRCONF(
[ 503.469988] gem 0001:04:0f.0: eth0: Found BCM5421-K2 PHY
[ 503.470686] ADDRCONF(
[ 505.877578] gem 0001:04:0f.0: eth0: Link is up at 100 Mbps, full-duplex
[ 505.877698] gem 0001:04:0f.0: eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 505.878053] ADDRCONF(
[ 516.533434] eth0: no IPv6 routers present
[ 616.747618] b43-phy0: Loading firmware version 508.1084 (2009-01-14 01:32:01)
[ 616.799638] b43-pci-bridge 0001:02:01.0: Warning: IOMMU window too big for device mask
[ 616.799643] b43-pci-bridge 0001:02:01.0: mask: 0x3fffffff, table end: 0x80000000
[ 616.799648] b43-phy0 ERROR: The machine/kernel does not support the required 30-bit DMA mask
[ 677.909025] b43-phy0 ERROR: Microcode not responding
[ 677.909034] b43-phy0 ERROR: You must go to http://
sudo: dmidecode: command not found
lo no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"BTHUB3-5GHR"
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:on
eth0 no wireless extensions.
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
cat: /var/lib/
> hal.1: read hal dataprocess 2269: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
> hal.1: read hal dataprocess 2269: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
18: PCI 10201.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: yfhX.VxzC0EuyMe7
Parent ID: uw1D.5Mf8KTNATC6
SysFS ID: /devices/
SysFS BusID: 0001:02:01.0
Hardware Class: network
Model: "Apple AirPort Extreme"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4320 "BCM4306 802.11b/g Wireless LAN Controller"
SubVendor: pci 0x106b "Apple Computer Inc."
SubDevice: pci 0x004e "AirPort Extreme"
Revision: 0x03
Driver: "b43-pci-bridge"
Driver Modules: "ssb"
Device File: wlan0
Features: WLAN
Memory Range: 0x80104000-
IRQ: 57 (no events)
HW Address: 00:11:24:aa:68:f6
Link detected: no
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v000014E4d
Driver Info #0:
Driver Status: ssb is active
Driver Activation Cmd: "modprobe ssb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #11 (PCI bridge)
24: PCI 1040f.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: 9D9m.Jer6NWLl1JC
Parent ID: sORS.tLWbDvDGu3B
SysFS ID: /devices/
SysFS BusID: 0001:04:0f.0
Hardware Class: network
Model: "Apple K2 GMAC (Sun GEM)"
Vendor: pci 0x106b "Apple Computer Inc."
Device: pci 0x004c "K2 GMAC (Sun GEM)"
Driver: "gem"
Driver Modules: "sungem"
Device File: eth0
Memory Range: 0x80400000-
Memory Range: 0x80300000-
IRQ: 41 (3805 events)
HW Address: 00:0d:93:4a:84:5a
Link detected: yes
Module Alias: "pci:v0000106Bd
Driver Info #0:
Driver Status: sungem is active
Driver Activation Cmd: "modprobe sungem"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #13 (PCI bridge)
Warning: bad ps syntax, perhaps a bogus '-'? See http://
root 962 0.4 0.4 28112 8296 ? S 03:44 0:03 /usr/bin/python -O /usr/share/
root 1014 0.2 0.4 17540 8392 ? S 03:44 0:01 /usr/bin/python -O /usr/share/
mike 1429 0.0 1.0 41332 20152 ? S 03:45 0:00 /usr/bin/python -O /usr/share/
mike 1849 0.8 1.2 176268 25912 ? S 03:52 0:02 /usr/bin/python -O /usr/share/
mike 2283 0.0 0.0 5496 804 pts/0 S+ 03:58 0:00 egrep --color=auto wpa|icd|etwork
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 192.168.1.254 0.0.0.0 UG 0 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 192.168.1.254
search home
total 104748
262145 drwxr-xr-x 2 root root 4096 Nov 4 02:30 .
2 drwxr-xr-x 23 root root 4096 Nov 4 01:56 ..
262149 -rw-r--r-- 1 root root 764103 Apr 11 2012 abi-3.2.
262155 -rw-r--r-- 1 root root 769058 Oct 2 17:44 abi-3.2.
262151 -rw-r--r-- 1 root root 129924 Apr 11 2012 config-
262150 -rw-r--r-- 1 root root 130125 Oct 2 17:44 config-
262146 lrwxrwxrwx 1 root root 33 Nov 4 02:28 initrd.img -> initrd.
262152 lrwxrwxrwx 1 root root 33 Nov 4 02:00 initrd.img.10166 -> initrd.
262158 -rw-r--r-- 1 root root 15741990 Nov 4 02:24 initrd.
262161 -rw-r--r-- 1 root root 15806921 Nov 4 02:30 initrd.
262153 -rw-r--r-- 1 root root 13869260 Apr 23 2012 initrd.img.old
262147 -rw------- 1 root root 3804157 Apr 11 2012 System.
262148 -rw------- 1 root root 3831814 Oct 2 17:44 System.
262159 lrwxrwxrwx 1 root root 30 Nov 4 02:28 vmlinux -> vmlinux-
262156 -rw-r--r-- 1 root root 25970340 Apr 23 2012 vmlinux-
262157 -rw------- 1 root root 26412515 Oct 2 17:44 vmlinux-
262154 lrwxrwxrwx 1 root root 30 Nov 4 02:00 vmlinux.old -> vmlinux-
Support status summary of 'mike-desktop':
You have 0 packages (0.0%) that can not/no longer be downloaded
You have 975 packages (100.0%) that are unsupported
Run with --show-unsupported, --show-supported or --show-all to see more details
Module Size Used by
joydev 17901 0
arc4 2460 2
lm90 22323 0
b43 482466 0
nouveau 1009498 2
mac80211 712242 1 b43
drm_kms_helper 54882 1 nouveau
snd_usb_audio 158704 0
ttm 106432 1 nouveau
cfg80211 284602 2 b43,mac80211
snd_hwdep 13785 1 snd_usb_audio
amd8131_edac 6946 0
snd_usbmidi_lib 35425 1 snd_usb_audio
bnep 20831 2
drm 339200 4 nouveau,
edac_core 73526 2 amd8131_edac
bcma 44009 1 b43
parport_pc 51395 0
mac_hid 6633 0
uninorth_agp 12604 1
rfcomm 67463 0
shpchp 48068 0
ppdev 10736 0
bluetooth 269001 10 bnep,rfcomm
rtc_generic 3058 0
lp 15964 0
parport 57669 3 parport_pc,ppdev,lp
snd_powermac 94726 0
snd_pcm 143545 2 snd_usb_
snd_page_alloc 11767 1 snd_pcm
snd_seq_midi 9631 0
snd_rawmidi 38508 2 snd_usbmidi_
snd_seq_midi_event 11465 1 snd_seq_midi
snd_seq 94206 2 snd_seq_
snd_timer 37287 2 snd_pcm,snd_seq
snd_seq_device 11137 3 snd_seq_
snd 117696 9 snd_usb_
soundcore 12537 1 snd
usbhid 60552 0
hid 117372 1 usbhid
ssb 84312 1 b43
firewire_ohci 56700 0
firewire_core 93261 1 firewire_ohci
crc_itu_t 1982 1 firewire_core
sungem 52207 0
sungem_phy 19496 1 sungem
therm_pm72 33699 0
mike@mike-
Question information
- Language:
- English Edit question
- Status:
- Answered
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Can you help with this problem?
Provide an answer of your own, or ask Mike bell for more information if necessary.