TP-Link TL-WN822N losing connection under load
The TL-WN822N USB adapter usually works but under heavy load it drops the wireless connection. Disconnecting and reconnecting the device fixes the problem.
I've got a customer desktop pc, but nothing special
MSI P55-GD65 motherboard
Intel I5 processor
4GB Corsair RAM
Ubuntu 12.10.1 lts
Anyhelp would be appreciated to fix this problem or recommendations of a reliable wireless-N usb device.
Following these instructions https:/
~>
~> sudo apt-get update; sudo apt-get install hwinfo grep rfkill; sudo lshw -C network; rfkill list; sudo iwlist scan | egrep -i 'chan|ssid'; cat /etc/network/
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
rfkill is already the newest version.
hwinfo is already the newest version.
The following packages were automatically installed and are no longer required:
cairo-
cairo-
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 101 not upgraded.
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:03:00.0
logical name: eth0
version: 03
serial: 40:61:86:00:85:c0
size: 10Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
resources: irq:51 ioport:
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:04:00.0
logical name: eth1
version: 03
serial: 40:61:86:00:85:c1
size: 10Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
resources: irq:52 ioport:
*-network
description: Wireless interface
physical id: 2
bus info: usb@1:1.6
logical name: wlan0
serial: 90:f6:52:10:dc:f1
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
lo Interface doesn't support scanning.
eth1 Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7583]
Kernel driver in use: r8169
--
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7583]
Kernel driver in use: r8169
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 046d:c05a Logitech, Inc. Optical Mouse M90
Bus 001 Device 004: ID 03f0:2c12 Hewlett-Packard Officejet J4680
Bus 001 Device 005: ID 0cf3:7015 Atheros Communications, Inc. TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287]
Bus 002 Device 003: ID 1a2c:0021
RUNNING STATE WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN
running connected enabled enabled enabled disabled
H/W path Device Class Description
=======
/0 bus P55-GD65 (MS-7583)
/0/0 memory 64KiB BIOS
/0/4 processor Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz
/0/4/5 memory 256KiB L1 cache
/0/4/6 memory 1MiB L2 cache
/0/4/7 memory 8MiB L3 cache
/0/2f memory 4GiB System Memory
/0/2f/0 memory 2GiB DIMM SDRAM Synchronous
/0/2f/1 memory DIMMProject-
/0/2f/2 memory 2GiB DIMM SDRAM Synchronous
/0/2f/3 memory DIMMProject-
/0/100 bridge Core Processor DMI
/0/100/3 bridge Core Processor PCI Express Root Port 1
/0/100/3/0 display GT200b [GeForce GTX 275]
/0/100/5 bridge Core Processor PCI Express Root Port 3
/0/100/8 generic Core Processor System Management Registers
/0/100/8.1 generic Core Processor Semaphore and Scratchpad Registers
/0/100/8.2 generic Core Processor System Control and Status Registers
/0/100/8.3 generic Core Processor Miscellaneous Registers
/0/100/10 generic Core Processor QPI Link
/0/100/10.1 generic Core Processor QPI Routing and Protocol Registers
/0/100/1a bus 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
/0/100/1b multimedia 5 Series/3400 Series Chipset High Definition Audio
/0/100/1c bridge 5 Series/3400 Series Chipset PCI Express Root Port 1
/0/100/1c/0 eth0 network RTL8111/8168B PCI Express Gigabit Ethernet controller
/0/100/1c.1 bridge 5 Series/3400 Series Chipset PCI Express Root Port 2
/0/100/1c.1/0 eth1 network RTL8111/8168B PCI Express Gigabit Ethernet controller
/0/100/1c.3 bridge 5 Series/3400 Series Chipset PCI Express Root Port 4
/0/100/1c.3/0 scsi6 storage JMB363 SATA/IDE Controller
/0/100/1c.3/0/0.0.0 /dev/cdrom disk CDDVDW TS-H663B
/0/100/1c.3/0.1 storage JMB363 SATA/IDE Controller
/0/100/1c.7 bridge 5 Series/3400 Series Chipset PCI Express Root Port 8
/0/100/1c.7/0 bus ASM1042 SuperSpeed USB Host Controller
/0/100/1d bus 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
/0/100/1e bridge 82801 PCI Bridge
/0/100/1f bridge 5 Series Chipset LPC Interface Controller
/0/100/1f.2 scsi0 storage 5 Series/3400 Series Chipset 6 port SATA AHCI Controller
/0/100/1f.2/0 /dev/sda disk 60GB OCZ-AGILITY3
/0/100/1f.2/0/1 /dev/sda1 volume 51GiB EXT4 volume
/0/100/1f.2/0/2 /dev/sda2 volume 4085MiB Extended partition
/0/100/1f.2/0/2/5 /dev/sda5 volume 4085MiB Linux swap / Solaris partition
/0/100/1f.2/1 /dev/sdb disk 2TB ST2000DL003-9VT1
/0/100/1f.2/1/1 /dev/sdb1 volume 7452GiB Linux raid autodetect partition
/0/100/1f.2/2 /dev/sdc disk 2TB ST2000DL003-9VT1
/0/100/1f.2/2/1 /dev/sdc1 volume 1863GiB Linux raid autodetect partition
/0/100/1f.2/3 /dev/sdd disk 2TB ST2000DL003-9VT1
/0/100/1f.2/3/1 /dev/sdd1 volume 1863GiB Linux raid autodetect partition
/0/100/1f.2/4 /dev/sde disk 2TB ST32000542AS
/0/100/1f.2/4/1 /dev/sde1 volume 1863GiB Linux raid autodetect partition
/0/100/1f.2/5 /dev/sdf disk 2TB ST32000542AS
/0/100/1f.2/5/1 /dev/sdf1 volume 1863GiB Linux raid autodetect partition
/0/100/1f.3 bus 5 Series/3400 Series Chipset SMBus Controller
/0/101 bridge Core Processor QuickPath Architecture Generic Non-Core Registers
/0/102 bridge Core Processor QuickPath Architecture System Address Decoder
/0/103 bridge Core Processor QPI Link 0
/0/104 bridge Core Processor QPI Physical 0
/0/105 bridge Core Processor Integrated Memory Controller
/0/106 bridge Core Processor Integrated Memory Controller Target Address Decoder
/0/107 bridge Core Processor Integrated Memory Controller Test Registers
/0/108 bridge Core Processor Integrated Memory Controller Channel 0 Control Registers
/0/109 bridge Core Processor Integrated Memory Controller Channel 0 Address Registers
/0/10a bridge Core Processor Integrated Memory Controller Channel 0 Rank Registers
/0/10b bridge Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers
/0/10c bridge Core Processor Integrated Memory Controller Channel 1 Control Registers
/0/10d bridge Core Processor Integrated Memory Controller Channel 1 Address Registers
/0/10e bridge Core Processor Integrated Memory Controller Channel 1 Rank Registers
/0/10f bridge Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers
/1 power To Be Filled By O.E.M.
/2 wlan0 network Wireless interface
Linux beastmaster 3.2.0-35-generic #55-Ubuntu SMP Wed Dec 5 17:42:16 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
[ 0.000000] No AGP bridge found
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] No NUMA configuration found
[ 0.000000] No AGP bridge found
[ 0.181417] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
[ 0.524031] ACPI: EC: Detected MSI hardware, enabling workarounds.
[ 0.561420] ACPI: No dock devices found.
[ 0.561422] HEST: Table not found.
[ 0.598719] i2c-core: driver [aat2870] using legacy suspend method
[ 0.598721] i2c-core: driver [aat2870] using legacy resume method
[ 0.598845] usbcore: registered new interface driver usbfs
[ 0.598852] usbcore: registered new interface driver hub
[ 0.598867] usbcore: registered new device driver usb
[ 0.613532] Switching to clocksource hpet
[ 0.620026] pnp: PnP ACPI: found 12 devices
[ 0.655368] ERST: Table is not found!
[ 1.013789] hub 1-0:1.0: USB hub found
[ 1.033774] hub 2-0:1.0: USB hub found
[ 1.041122] hub 3-0:1.0: USB hub found
[ 1.046179] hub 4-0:1.0: USB hub found
[ 1.097686] usbcore: registered new interface driver libusual
[ 1.097737] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.109113] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.325719] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.458563] hub 1-1:1.0: USB hub found
[ 1.569692] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.629739] Switching to clocksource tsc
[ 1.702748] hub 2-1:1.0: USB hub found
[ 1.773799] usb 1-1.3: new low-speed USB device number 3 using ehci_hcd
[ 1.941759] usb 1-1.5: new high-speed USB device number 4 using ehci_hcd
[ 2.105783] usb 1-1.6: new high-speed USB device number 5 using ehci_hcd
[ 2.269830] usb 2-1.6: new low-speed USB device number 3 using ehci_hcd
[ 3.341139] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc9000064c000, 40:61:86:00:85:c0, XID 081000c0 IRQ 51
[ 3.341141] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.341755] r8169 0000:04:00.0: eth1: RTL8168d/8111d at 0xffffc9000064e000, 40:61:86:00:85:c1, XID 081000c0 IRQ 52
[ 3.341758] r8169 0000:04:00.0: eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.355560] input: Logitech USB Optical Mouse as /devices/
[ 3.355644] generic-usb 0003:046D:
[ 3.357934] input: USB USB Keykoard as /devices/
[ 3.358029] generic-usb 0003:1A2C:
[ 13.356472] generic-usb 0003:1A2C:
[ 13.356539] generic-usb 0003:1A2C:
[ 13.356644] input: USB USB Keykoard as /devices/
[ 13.357034] generic-usb 0003:1A2C:
[ 13.357064] usbcore: registered new interface driver usbhid
[ 13.357068] usbhid: USB HID core driver
[ 14.537310] Console: switching to colour frame buffer device 80x30
[ 14.686825] md: multipath personality registered for level -4
[ 16.010320] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 16.196327] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 16.877058] ADDRCONF(
[ 16.877063] ADDRCONF(
[ 16.932281] lp: driver loaded but no devices found
[ 17.050790] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 17.066784] cfg80211: Calling CRDA to update world regulatory domain
[ 17.085279] device-mapper: multipath: version 1.3.0 loaded
[ 17.168304] cfg80211: World regulatory domain updated:
[ 17.168306] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.168308] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.168310] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.168312] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.168314] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.168316] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.186569] input: HDA Intel Line as /devices/
[ 17.186629] input: HDA Intel Front Mic as /devices/
[ 17.186680] input: HDA Intel Rear Mic as /devices/
[ 17.186731] input: HDA Intel Front Headphone as /devices/
[ 17.186794] input: HDA Intel Line-Out Side as /devices/
[ 17.186843] input: HDA Intel Line-Out CLFE as /devices/
[ 17.186890] input: HDA Intel Line-Out Surround as /devices/
[ 17.186938] input: HDA Intel Line-Out Front as /devices/
[ 17.203756] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2C12
[ 17.203773] usbcore: registered new interface driver usblp
[ 17.286907] vboxdrv: Found 4 processor cores.
[ 17.306261] vboxpci: IOMMU not found (not registered)
[ 17.312052] usb 1-1.6: ath9k_htc: Transferred FW: htc_7010.fw, size: 72992
[ 17.313810] r8169 0000:03:00.0: eth0: link down
[ 17.314170] ADDRCONF(
[ 17.314403] ADDRCONF(
[ 17.371777] r8169 0000:04:00.0: eth1: link down
[ 17.372106] ADDRCONF(
[ 17.372335] ADDRCONF(
[ 17.373285] ath9k_htc 1-1.6:1.0: ath9k_htc: HTC initialized with 45 credits
[ 17.499184] ath9k_htc 1-1.6:1.0: ath9k_htc: FW Version: 1.3
[ 17.499187] ath: EEPROM regdomain: 0x809c
[ 17.499188] ath: EEPROM indicates we should expect a country code
[ 17.499189] ath: doing EEPROM country->regdmn map search
[ 17.499190] ath: country maps to regdmn code: 0x52
[ 17.499192] ath: Country alpha2 being used: CN
[ 17.499193] ath: Regpair used: 0x52
[ 17.499195] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499197] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.499199] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499201] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.499203] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499205] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.499206] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499208] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.499210] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499212] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.499214] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499216] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.499217] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499219] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.499221] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499223] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.499224] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499226] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.499228] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499230] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.499231] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499233] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.499235] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 17.499236] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 17.499238] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 17.499293] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499295] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.499297] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499299] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.499300] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499302] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.499304] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499306] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.499308] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499310] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.499311] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499313] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.499315] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499317] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.499318] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499320] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.499322] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499324] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.499325] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499327] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.499329] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499331] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.499333] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499335] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.499336] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499338] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.499340] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 17.499342] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.502099] ieee80211 phy0: Atheros AR9287 Rev:2
[ 17.502109] cfg80211: Calling CRDA for country: CN
[ 17.502548] Registered led device: ath9k_htc-phy0
[ 17.502551] usb 1-1.6: ath9k_htc: USB layer initialized
[ 17.502568] usbcore: registered new interface driver ath9k_htc
[ 17.512999] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 17.513003] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.513004] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 17.513007] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.513008] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 17.513010] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.513012] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 17.513014] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.513015] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 17.513017] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.513019] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 17.513021] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.513022] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 17.513024] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.513026] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 17.513028] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.513029] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 17.513031] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.513033] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 17.513035] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.513036] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 17.513038] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.513040] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 17.513042] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.513043] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 17.513045] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.513047] cfg80211: Disabling freq 2484 MHz
[ 17.513049] cfg80211: Regulatory domain changed to country: CN
[ 17.513050] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.513052] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 17.513054] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 17.698082] ADDRCONF(
[ 17.698607] ADDRCONF(
[ 21.017846] wlan0: authenticate with 00:24:01:de:e6:15 (try 1)
[ 21.019663] wlan0: authenticated
[ 21.195454] wlan0: associate with 00:24:01:de:e6:15 (try 1)
[ 21.199520] wlan0: RX AssocResp from 00:24:01:de:e6:15 (capab=0x431 status=0 aid=3)
[ 21.199523] wlan0: associated
[ 21.253578] ADDRCONF(
[ 31.510017] wlan0: no IPv6 routers present
[17009.833670] wlan0: deauthenticated from 00:24:01:de:e6:15 (Reason: 6)
[17010.083303] cfg80211: All devices are disconnected, going to restore regulatory settings
[17010.083311] cfg80211: Restoring regulatory settings
[17010.083480] cfg80211: Calling CRDA to update world regulatory domain
[17010.182993] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[17010.183000] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[17010.183005] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[17010.183010] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[17010.183014] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[17010.183018] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[17010.183022] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[17010.183027] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[17010.183030] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[17010.183035] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[17010.183039] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[17010.183043] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[17010.183047] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[17010.183052] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[17010.183055] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[17010.183060] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[17010.183064] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[17010.183068] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[17010.183072] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[17010.183077] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[17010.183080] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[17010.183085] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[17010.183089] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[17010.183093] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[17010.183097] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[17010.183102] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[17010.183105] cfg80211: Disabling freq 2484 MHz
[17010.183110] cfg80211: World regulatory domain updated:
[17010.183113] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[17010.183117] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[17010.183121] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[17010.183125] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[17010.183130] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[17010.183134] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[17011.412412] wlan0: authenticate with 00:24:01:de:e6:15 (try 1)
[17011.612261] wlan0: authenticate with 00:24:01:de:e6:15 (try 2)
[17011.808888] wlan0: authenticate with 00:24:01:de:e6:15 (try 3)
[17011.810731] wlan0: authenticated
[17011.924599] wlan0: associate with 00:24:01:de:e6:15 (try 1)
[17011.928665] wlan0: RX ReassocResp from 00:24:01:de:e6:15 (capab=0x431 status=0 aid=3)
[17011.928671] wlan0: associated
[46688.556808] wlan0: deauthenticated from 00:24:01:de:e6:15 (Reason: 6)
[46688.769879] cfg80211: All devices are disconnected, going to restore regulatory settings
[46688.769886] cfg80211: Restoring regulatory settings
[46688.769891] cfg80211: Calling CRDA to update world regulatory domain
[46688.775938] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[46688.775945] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[46688.775949] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[46688.775954] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[46688.775958] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[46688.775963] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[46688.775966] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[46688.775971] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[46688.775975] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[46688.775979] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[46688.775983] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[46688.775988] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[46688.775992] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[46688.775996] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[46688.776000] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[46688.776005] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[46688.776008] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[46688.776013] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[46688.776017] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[46688.776021] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[46688.776025] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[46688.776030] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[46688.776033] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[46688.776038] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[46688.776042] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[46688.776047] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[46688.776050] cfg80211: Disabling freq 2484 MHz
[46688.776055] cfg80211: World regulatory domain updated:
[46688.776057] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[46688.776062] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[46688.776066] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[46688.776070] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[46688.776074] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[46688.776078] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[46690.110043] wlan0: authenticate with 00:24:01:de:e6:15 (try 1)
[46690.111726] wlan0: authenticated
[46690.219901] wlan0: associate with 00:24:01:de:e6:15 (try 1)
[46690.223967] wlan0: RX ReassocResp from 00:24:01:de:e6:15 (capab=0x431 status=0 aid=1)
[46690.223972] wlan0: associated
[108146.148725] rhythmbox[7122]: segfault at 0 ip 00007fd70f493dca sp 00007fff7af75050 error 4 in librhythmbox-
[108174.088832] rhythmbox[7217]: segfault at 0 ip 00007fd93964fdca sp 00007fff46ffaae0 error 4 in librhythmbox-
Release Date: 09/03/2009
Serial services are supported (int 14h)
Manufacturer: MICRO-STAR INTERNATIONAL CO.,LTD
Product Name: MS-7583
Serial Number: To Be Filled By O.E.M.
Manufacturer: MICRO-STAR INTERNATIONAL CO.,LTD
Product Name: P55-GD65 (MS-7583)
Serial Number: To be filled by O.E.M.
Manufacturer: MICRO-STAR INTERNATIONAL CO.,LTD
Serial Number: To Be Filled By O.E.M.
Manufacturer: Intel
Serial Number: To Be Filled By O.E.M.
Port Type: Serial Port 16550A Compatible
Manufacturer: Manufacturer00
Serial Number: SerNum00
Manufacturer: Manufacturer01
Serial Number: SerNum01
Manufacturer: Manufacturer02
Serial Number: SerNum02
Manufacturer: Manufacturer03
Serial Number: SerNum03
Manufacturer: To Be Filled By O.E.M.
Serial Number: To Be Filled By O.E.M.
lo no wireless extensions.
eth1 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"lochleven"
Bit Rate=104 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=28/70 Signal level=-82 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:60 Invalid misc:26672 Missed beacon:0
eth0 no wireless extensions.
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
WimaxEnabled=true
> hal.1: read hal dataprocess 10531: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
29: PCI 300.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.iOAM8_w1Ie6
Parent ID: z8Q3.alOI++A+M7B
SysFS ID: /devices/
SysFS BusID: 0000:03:00.0
Hardware Class: network
Model: "Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8168 "RTL8111/8168B PCI Express Gigabit Ethernet controller"
SubVendor: pci 0x1462 "Micro-Star International Co., Ltd."
SubDevice: pci 0x7583
Revision: 0x03
Driver: "r8169"
Driver Modules: "r8169"
Device File: eth0
I/O Ports: 0xc800-0xc8ff (rw)
Memory Range: 0xfbcff000-
Memory Range: 0xf6efc000-
Memory Range: 0xfbcc0000-
IRQ: 51 (no events)
HW Address: 40:61:86:00:85:c0
Link detected: no
Module Alias: "pci:v000010ECd
Driver Info #0:
Driver Status: r8169 is active
Driver Activation Cmd: "modprobe r8169"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #19 (PCI bridge)
30: PCI 400.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: JNkJ.iOAM8_w1Ie6
Parent ID: qTvu.caHoy8QPQuB
SysFS ID: /devices/
SysFS BusID: 0000:04:00.0
Hardware Class: network
Model: "Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8168 "RTL8111/8168B PCI Express Gigabit Ethernet controller"
SubVendor: pci 0x1462 "Micro-Star International Co., Ltd."
SubDevice: pci 0x7583
Revision: 0x03
Driver: "r8169"
Driver Modules: "r8169"
Device File: eth1
I/O Ports: 0xd800-0xd8ff (rw)
Memory Range: 0xfbdff000-
Memory Range: 0xf6ffc000-
Memory Range: 0xfbdc0000-
IRQ: 52 (no events)
HW Address: 40:61:86:00:85:c1
Link detected: no
Module Alias: "pci:v000010ECd
Driver Info #0:
Driver Status: r8169 is active
Driver Activation Cmd: "modprobe r8169"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #20 (PCI bridge)
59: USB 00.0: 0282 WLAN controller
[Created at usb.122]
Unique ID: xJ63.TJUxypVwyF5
Parent ID: ADDn.0j9+vWlqL56
SysFS ID: /devices/
SysFS BusID: 1-1.6:1.0
Hardware Class: network
Model: "Atheros USB WLAN"
Hotplug: USB
Vendor: usb 0x0cf3 "Atheros Communications, Inc."
Device: usb 0x7015 "USB WLAN"
Revision: "2.02"
Serial ID: "12345"
Driver: "ath9k_htc"
Driver Modules: "ath9k_htc"
Device File: wlan0
Features: WLAN
Speed: 480 Mbps
HW Address: 90:f6:52:10:dc:f1
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "usb:v0CF3p7015
Driver Info #0:
Driver Status: ath9k_htc is active
Driver Activation Cmd: "modprobe ath9k_htc"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #53 (Hub)
Warning: bad ps syntax, perhaps a bogus '-'? See http://
root 1435 0.0 0.1 237920 4388 ? Ssl Jan25 0:07 NetworkManager
root 1714 0.0 0.0 31708 1868 ? Ss Jan25 0:01 /sbin/wpa_
root 2333 0.0 0.0 7264 1208 ? S Jan25 0:00 /sbin/dhclient -d -4 -sf /usr/lib/
nobody 2337 0.0 0.0 33024 1228 ? S Jan25 0:01 /usr/sbin/dnsmasq --no-resolv --keep-
root 10547 0.0 0.0 13588 896 pts/2 S+ 11:59 0:00 egrep --color=auto wpa|icd|etwork
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 wlan0
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 127.0.0.1
search home
Module Size Used by
dm_crypt 23125 0
arc4 12529 2
pci_stub 12622 1
vboxpci 23237 0
vboxnetadp 13382 0
vboxnetflt 23478 0
vboxdrv 287082 3 vboxpci,
usblp 18307 0
snd_hda_
mxm_wmi 13021 0
snd_hda_intel 33773 3
snd_hda_codec 127706 2 snd_hda_
snd_hwdep 17764 1 snd_hda_codec
snd_pcm 97275 2 snd_hda_
ath9k_htc 92738 0
psmouse 97485 0
dm_multipath 23275 0
mac80211 506862 1 ath9k_htc
ath9k_common 14053 1 ath9k_htc
ath9k_hw 411196 2 ath9k_htc,
ath 24067 3 ath9k_htc,
cfg80211 205774 3 ath9k_htc,
serio_raw 13211 0
joydev 17693 0
i7core_edac 28102 0
edac_core 53746 3 i7core_edac
snd_seq_midi 13324 0
snd_rawmidi 30748 1 snd_seq_midi
snd_seq_midi_event 14899 1 snd_seq_midi
snd_seq 61929 2 snd_seq_
snd_timer 29990 2 snd_pcm,snd_seq
snd_seq_device 14540 3 snd_seq_
snd 79041 15 snd_hda_
wmi 19256 1 mxm_wmi
nvidia 12319264 40
lttng_probe_timer 16158 0
lttng_probe_
lttng_probe_signal 13852 0
lttng_probe_sched 21584 0
lttng_probe_kvm 16728 0
lttng_probe_irq 14000 0
mac_hid 13253 0
lttng_probe_block 25652 0
parport_pc 32866 0
bnep 18281 2
lttng_types 12600 0
lttng_probe_lttng 12940 0
lttng_ring_
rfcomm 47604 0
lttng_ring_
lttng_ring_
lttng_ring_
bluetooth 180153 10 bnep,rfcomm
lttng_ring_
lttng_ring_
ppdev 17113 0
soundcore 15091 1 snd
snd_page_alloc 18529 2 snd_hda_
lttng_tracer 571218 14 lttng_probe_
lp 17799 0
parport 46562 3 parport_pc,ppdev,lp
lttng_kretprobes 13446 1 lttng_tracer
lttng_kprobes 13091 1 lttng_tracer
binfmt_misc 17540 1
lttng_ftrace 13330 1 lttng_tracer
lttng_statedump 42839 1 lttng_tracer
lttng_lib_
raid10 35489 0
raid1 35572 0
raid0 17229 0
multipath 13145 0
linear 12894 0
dm_raid45 78155 0
dm_mirror 22203 0
dm_region_hash 20961 1 dm_mirror
dm_log 18564 3 dm_raid45,
vesafb 13844 1
raid456 58338 1
async_pq 13187 1 raid456
async_xor 12879 2 raid456,async_pq
xor 12894 2 dm_raid45,async_xor
async_memcpy 12529 1 raid456
async_raid6_recov 12824 1 raid456
raid6_pq 88382 2 async_pq,
async_tx 13349 5 raid456,
usbhid 47238 0
hid 99636 1 usbhid
pata_jmicron 12747 0
r8169 62154 0
~>
Question information
- Language:
- English Edit question
- Status:
- Solved
- Assignee:
- No assignee Edit question
- Solved by:
- adam
- Solved:
- Last query:
- Last reply: