rt2800pci wireless problem on ubuntu 12.04
Frequent wireless interruptions on a wireless card working well on Windows 7 and previous ubuntu installations.
sudo apt-get update; sudo apt-get install hwinfo grep rfkill; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Hit http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Hit http://
Ign http://
Hit http://
Ign http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
rfkill is already the newest version.
hwinfo is already the newest version.
The following package was automatically installed and is no longer required:
linux-
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 02
serial: 00:1f:d0:9a:69:77
size: 10Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
resources: irq:42 ioport:
*-network
description: Wireless interface
product: RT2760 Wireless 802.11n 1T/2R
vendor: Ralink corp.
physical id: 6
bus info: pci@0000:03:06.0
logical name: wlan0
version: 00
serial: 00:1d:6a:3a:c9:fa
width: 32 bits
clock: 33MHz
resources: irq:20 memory:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
lo Interface doesn't support scanning.
wlan0 Scan completed :
Cell 01 - Address: BC:AE:C5:7E:16:F4
Cell 02 - Address: F8:D1:11:32:86:E0
Cell 03 - Address: 00:16:0A:12:BD:D8
Cell 04 - Address: 00:21:91:75:34:72
eth0 Interface doesn't support scanning.
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI RS690 Host Bridge [1002:7911]
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS690 PCI to PCI Bridge (PCI Express Graphics Port 0) [1002:7913]
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916]
00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390]
00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398]
00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398]
00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3a)
00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c]
00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383]
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384]
00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RV730XT [Radeon HD 4670] [1002:9490]
01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] [1002:aa38]
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
03:06.0 Network controller [0280]: Ralink corp. RT2760 Wireless 802.11n 1T/2R [1814:0701]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04a9:221c Canon, Inc. CanoScan LiDE 60
Bus 003 Device 002: ID 09da:000a A4 Tech Co., Ltd Optical Mouse Opto 510D
Bus 002 Device 002: ID 163f:1611
H/W path Device Class Description
=======
/0 bus GA-MA74GM-S2
/0/0 memory 128KiB BIOS
/0/4 processor AMD Athlon(tm) 64 X2 Dual Core Proces
/0/4/8 memory 128KiB L1 cache
/0/4/a memory 512KiB L2 cache
/0/9 memory 128KiB L1 cache
/0/22 memory 2GiB System Memory
/0/22/0 memory DIMM 800 MHz (1.2 ns) [empty]
/0/22/1 memory 2GiB DIMM 800 MHz (1.2 ns)
/0/100 bridge RS690 Host Bridge
/0/100/2 bridge RS690 PCI to PCI Bridge (PCI Express
/0/100/2/0 display RV730XT [Radeon HD 4670]
/0/100/2/0.1 multimedia RV710/730 HDMI Audio [Radeon HD 4000
/0/100/6 bridge RS690 PCI to PCI Bridge (PCI Express
/0/100/6/0 eth0 network RTL8111/8168B PCI Express Gigabit Eth
/0/100/11 scsi2 storage SB7x0/SB8x0/SB9x0 SATA Controller [ID
/0/100/11/0.0.0 /dev/sda disk 250GB WDC WD2500KS-00M
/0/100/11/0.0.0/1 /dev/sda1 volume 144GiB Windows NTFS volume
/0/100/11/0.0.0/2 /dev/sda2 volume 83GiB EXT4 volume
/0/100/11/0.0.0/3 /dev/sda3 volume 4169MiB Linux swap volume
/0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controlle
/0/100/12.1 bus SB7x0 USB OHCI1 Controller
/0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
/0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controlle
/0/100/13.1 bus SB7x0 USB OHCI1 Controller
/0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
/0/100/14 bus SBx00 SMBus Controller
/0/100/14.1 scsi4 storage SB7x0/SB8x0/SB9x0 IDE Controller
/0/100/14.1/0.0.0 /dev/cdrom disk DRW-1608P3S
/0/100/14.2 multimedia SBx00 Azalia (Intel HDA)
/0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller
/0/100/14.4 bridge SBx00 PCI to PCI Bridge
/0/100/14.4/6 wlan0 network RT2760 Wireless 802.11n 1T/2R
/0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controlle
/0/101 bridge K8 [Athlon64/Opteron] HyperTransport
/0/102 bridge K8 [Athlon64/Opteron] Address Map
/0/103 bridge K8 [Athlon64/Opteron] DRAM Controller
/0/104 bridge K8 [Athlon64/Opteron] Miscellaneous C
/0/1 scsi6 storage
/0/1/0.0.0 /dev/sdb disk SCSI Disk
/0/1/0.0.1 /dev/sdc disk SCSI Disk
/0/1/0.0.2 /dev/sdd disk SCSI Disk
/0/1/0.0.3 /dev/sde disk SCSI Disk
Linux Zoli 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
[ 0.000000] No AGP bridge found
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] found SMP MP-table at [ffff8800000f55f0] f55f0
[ 0.000000] No NUMA configuration found
[ 0.000000] No AGP bridge found
[ 0.314557] ACPI: No dock devices found.
[ 0.314560] HEST: Table not found.
[ 0.345640] i2c-core: driver [aat2870] using legacy suspend method
[ 0.345642] i2c-core: driver [aat2870] using legacy resume method
[ 0.345846] usbcore: registered new interface driver usbfs
[ 0.345864] usbcore: registered new interface driver hub
[ 0.345894] usbcore: registered new device driver usb
[ 0.357073] Switching to clocksource hpet
[ 0.433878] pnp: PnP ACPI: found 13 devices
[ 1.724962] ERST: Table is not found!
[ 1.853526] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/
[ 1.853551] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.864168] hub 1-0:1.0: USB hub found
[ 1.864374] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/
[ 1.864390] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.876142] hub 2-0:1.0: USB hub found
[ 1.936125] hub 3-0:1.0: USB hub found
[ 1.996125] hub 4-0:1.0: USB hub found
[ 2.056123] hub 5-0:1.0: USB hub found
[ 2.116132] hub 6-0:1.0: USB hub found
[ 2.176169] hub 7-0:1.0: USB hub found
[ 2.176334] usbcore: registered new interface driver libusual
[ 2.185468] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2 cpu cores) (version 2.20.00)
[ 2.185573] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.232027] usb 1-3: new high-speed USB device number 3 using ehci_hcd
[ 2.344029] ata3: applying PMP SRST workaround and retrying
[ 2.628087] usb 3-1: new low-speed USB device number 2 using ohci_hcd
[ 2.642021] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90000306000, 00:1f:d0:9a:69:77, XID 1c4000c0 IRQ 42
[ 2.642024] r8169 0000:02:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 2.877614] usbcore: registered new interface driver usbhid
[ 2.877617] usbhid: USB HID core driver
[ 2.883963] input: A4Tech PS/2+USB Mouse as /devices/
[ 2.884103] a4tech 0003:09DA:
[ 2.916068] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.053317] scsi6 : usb-storage 2-1:1.0
[ 3.053389] usbcore: registered new interface driver usb-storage
[ 16.948805] ADDRCONF(
[ 17.040033] lp: driver loaded but no devices found
[ 17.419979] input: HDA ATI SB Line as /devices/
[ 17.420099] input: HDA ATI SB Front Mic as /devices/
[ 17.420158] input: HDA ATI SB Rear Mic as /devices/
[ 17.420218] input: HDA ATI SB Front Headphone as /devices/
[ 17.420277] input: HDA ATI SB Line-Out as /devices/
[ 17.454349] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/
[ 17.888372] rt2800pci 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 17.935411] Registered led device: rt2800pci-
[ 17.935430] Registered led device: rt2800pci-
[ 17.935449] Registered led device: rt2800pci-
[ 18.016898] r8169 0000:02:00.0: eth0: link down
[ 18.017455] ADDRCONF(
[ 18.018079] ADDRCONF(
[ 18.100395] phy0 -> rt2800pci_
[ 18.124511] ADDRCONF(
[ 18.124799] ADDRCONF(
[ 18.264069] Console: switching to colour frame buffer device 175x65
[ 21.144063] wlan0: authenticate with bc:ae:c5:7e:16:f4 (try 1)
[ 21.145477] wlan0: authenticated
[ 21.145728] wlan0: associate with bc:ae:c5:7e:16:f4 (try 1)
[ 21.149217] wlan0: RX AssocResp from bc:ae:c5:7e:16:f4 (capab=0x411 status=0 aid=1)
[ 21.149220] wlan0: associated
[ 21.149223] wlan0: moving STA bc:ae:c5:7e:16:f4 to state 1
[ 21.149225] wlan0: moving STA bc:ae:c5:7e:16:f4 to state 2
[ 21.156425] ADDRCONF(
[ 21.552842] wlan0: moving STA bc:ae:c5:7e:16:f4 to state 3
[ 31.800013] wlan0: no IPv6 routers present
[ 157.508157] wlan0: deauthenticating from bc:ae:c5:7e:16:f4 by local choice (reason=3)
[ 157.532123] wlan0: moving STA bc:ae:c5:7e:16:f4 to state 2
[ 157.532128] wlan0: moving STA bc:ae:c5:7e:16:f4 to state 1
[ 157.532131] wlan0: moving STA bc:ae:c5:7e:16:f4 to state 0
[ 158.713211] wlan0: authenticate with bc:ae:c5:7e:16:f4 (try 1)
[ 158.714674] wlan0: authenticated
[ 158.715146] wlan0: associate with bc:ae:c5:7e:16:f4 (try 1)
[ 158.718546] wlan0: RX ReassocResp from bc:ae:c5:7e:16:f4 (capab=0x411 status=0 aid=1)
[ 158.718555] wlan0: associated
[ 158.718563] wlan0: moving STA bc:ae:c5:7e:16:f4 to state 1
[ 158.718568] wlan0: moving STA bc:ae:c5:7e:16:f4 to state 2
[ 159.223224] wlan0: moving STA bc:ae:c5:7e:16:f4 to state 3
[ 169.736025] wlan0: no IPv6 routers present
Release Date: 06/02/2009
Serial services are supported (int 14h)
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: GA-MA74GM-S2
Serial Number:
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: GA-MA74GM-S2
Serial Number: Tue Jan 01 00:02:02 2008.
Manufacturer: Gigabyte Technology Co., Ltd.
Serial Number:
Manufacturer: AMD
Serial Number:
Port Type: Serial Port 16450 Compatible
Manufacturer:
Serial Number:
Manufacturer:
Serial Number:
lo no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"VRNC"
Bit Rate=72.2 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=52/70 Signal level=-58 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:1095 Invalid misc:0 Missed beacon:0
eth0 no wireless extensions.
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist rt2800pci
blacklist uart6850
blacklist twl4030_wdt
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
WimaxEnabled=true
> hal.1: read hal dataprocess 2996: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
31: PCI 200.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.1Z6M++B8ak4
Parent ID: H0_h.pUhf3glqTA7
SysFS ID: /devices/
SysFS BusID: 0000:02:00.0
Hardware Class: network
Model: "Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8168 "RTL8111/8168B PCI Express Gigabit Ethernet controller"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0xe000 "GA-EP45-DS5 Motherboard"
Revision: 0x02
Driver: "r8169"
Driver Modules: "r8169"
Device File: eth0
I/O Ports: 0xde00-0xdeff (rw)
Memory Range: 0xfdbff000-
Memory Range: 0xfdbe0000-
Memory Range: 0xfdb00000-
IRQ: 42 (no events)
HW Address: 00:1f:d0:9a:69:77
Link detected: no
Module Alias: "pci:v000010ECd
Driver Info #0:
Driver Status: r8169 is active
Driver Activation Cmd: "modprobe r8169"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #11 (PCI bridge)
32: PCI 306.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: y9sn.cIXJziXYB35
Parent ID: qscc.ULOo3yhA66C
SysFS ID: /devices/
SysFS BusID: 0000:03:06.0
Hardware Class: network
Model: "RaLink RT2760 Wireless 802.11n 1T/2R Cardbus"
Vendor: pci 0x1814 "RaLink"
Device: pci 0x0701 "RT2760 Wireless 802.11n 1T/2R Cardbus"
SubVendor: pci 0x1948
SubDevice: pci 0x3c8d
Driver: "rt2800pci"
Driver Modules: "rt2800pci"
Device File: wlan0
Features: WLAN
Memory Range: 0xfddf0000-
IRQ: 20 (22440 events)
HW Address: 00:1d:6a:3a:c9:fa
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v00001814d
Driver Info #0:
Driver Status: rt2800pci is active
Driver Activation Cmd: "modprobe rt2800pci"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #23 (PCI bridge)
Warning: bad ps syntax, perhaps a bogus '-'? See http://
root 881 0.0 0.2 237616 5412 ? Ssl 12:41 0:00 NetworkManager
root 986 0.0 0.1 31700 2312 ? Ss 12:41 0:00 /sbin/wpa_
root 2339 0.0 0.0 7264 1484 ? S 12:44 0:00 /sbin/dhclient -d -4 -sf /usr/lib/
nobody 2342 0.0 0.0 33020 1264 ? S 12:44 0:00 /usr/sbin/dnsmasq --no-resolv --keep-
zoli 3012 0.0 0.0 13584 868 pts/0 S+ 12:54 0:00 egrep --color=auto wpa|icd|etwork
Module Size Used by
joydev 17693 0
vesafb 13844 1
rfcomm 46621 0
bnep 18139 2
bluetooth 185573 10 rfcomm,bnep
arc4 12529 2
rt2800pci 18476 0
rt2800lib 54065 1 rt2800pci
crc_ccitt 12667 1 rt2800lib
rt2x00pci 14475 1 rt2800pci
rt2x00lib 50497 3 rt2800pci,
ppdev 17113 0
mac80211 514621 3 rt2800lib,
snd_seq_midi 13324 0
snd_rawmidi 30748 1 snd_seq_midi
serio_raw 13211 0
snd_seq_midi_event 14899 1 snd_seq_midi
snd_hda_codec_hdmi 32474 1
snd_seq 61896 2 snd_seq_
snd_hda_
cfg80211 209821 2 rt2x00lib,mac80211
eeprom_93cx6 13302 1 rt2800pci
edac_core 53746 0
snd_hda_intel 33773 5
snd_hda_codec 127706 3 snd_hda_
edac_mce_amd 23709 0
snd_hwdep 13668 1 snd_hda_codec
k8temp 13057 0
snd_pcm 97188 3 snd_hda_
sp5100_tco 13791 0
fglrx 3263886 128
i2c_piix4 13301 0
snd_seq_device 14540 3 snd_seq_
snd_timer 29990 2 snd_seq,snd_pcm
parport_pc 32866 1
snd 78855 20 snd_rawmidi,
soundcore 15091 1 snd
snd_page_alloc 18529 2 snd_hda_
mac_hid 13253 0
lp 17799 0
parport 46562 3 ppdev,parport_pc,lp
usb_storage 49198 0
hid_a4tech 12678 0
usbhid 47199 0
hid 99559 2 hid_a4tech,usbhid
pata_atiixp 13204 0
r8169 62099 0
Question information
- Language:
- English Edit question
- Status:
- Solved
- Assignee:
- No assignee Edit question
- Solved by:
- Zoltan Vrencian
- Solved:
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
|
Revision history for this message
|
#2 |
|
Revision history for this message
|
#3 |
