Question #150872 same problem on Dell Latitude D530?
I have followed the instructions to solve my wireless problem due to BCM4312 not being active. Checked bios to insure is set enabled. As suggested in the above question, when I invoked the last command "sudo rfkill unblock all" command did not process. Message <sudo: unable to resolve host....
This laptop was working ok with 10.04. Did a clean install after formatting drive. Now unable to see wireless adapter with network manager. Only shows "Enable Networking". "Wireless Networks" in NM is shaded.
Any help appreciated.
Question information
- Language:
- English Edit question
- Status:
- Answered
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
Hi,
Please first connect your wired network adapter to the wireless router using an ethernet cable (also known as a LAN cable).
In order to gather essential troubleshooting information about your wireless card, please follow this procedure:
Step 1:
If you are using the Gnome interface, open the Terminal console via "Applications-
If you are using the Unity interface, the easiest way to open the Terminal is to use the 'search' function on the dash. Or you can click on the 'More Apps' button, click on the 'See more results' by the installed section, and find it in that list of applications. A third way, available after you click on the 'More Apps' button, is to go to the search bar, and see that the far right end of it says 'All Applications'. You then click on that, and you'll see the full list. Then you can go to Accessories > Terminal after that.
So the methods in Unity are:
Dash > Search for Terminal
Dash > More Apps > 'See More Results' > Terminal
Dash > More Apps > Accessories > Terminal
Step 2: Please copy-paste the following command from https:/
Tip: If you have a wheel mouse or 3 button mouse you do not need to type commands into the Terminal. Highlight the command written on the page. Move your cursor anywhere in the Terminal and press the wheel or middle button. Automatic Copy and paste! No spelling mistakes! No Typos! No other errors!
sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/
Step 3: Please post results (copy/paste terminal output) on this thread. The troubleshooters here need to see the full Terminal output from running the above command.
Regards,
Mark
|
Revision history for this message
|
#2 |
Hello Mark,
Thanks for your help. sorry about the delay back to you. Had to setup my laptop in a different location.
Here is the printout from your instructions:
bud@bud-
sudo: unable to resolve host bud-Latitude-D530
[sudo] password for bud:
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Get:1 http://
Hit http://
Hit http://
Hit http://
Get:2 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Hit http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:3 http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Get:4 http://
Get:5 http://
Get:6 http://
Get:7 http://
Get:8 http://
Get:9 http://
Ign http://
Ign http://
Get:10 http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Fetched 358 kB in 3s (94.3 kB/s)
Reading package lists... Done
sudo: unable to resolve host bud-Latitude-D530
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
The following extra packages will be installed:
libhal1 libhd16
The following NEW packages will be installed:
hwinfo libhal1 libhd16
0 upgraded, 3 newly installed, 0 to remove and 26 not upgraded.
Need to get 818 kB of archives.
After this operation, 2,269 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://
Get:2 http://
Get:3 http://
Fetched 818 kB in 2s (399 kB/s)
Selecting previously deselected package libhal1.
(Reading database ... 172482 files and directories currently installed.)
Unpacking libhal1 (from .../libhal1_
Selecting previously deselected package libhd16.
Unpacking libhd16 (from .../libhd16_
Selecting previously deselected package hwinfo.
Unpacking hwinfo (from .../hwinfo_
Processing triggers for man-db ...
Setting up libhal1 (0.5.14-5+svn1) ...
Setting up libhd16 (16.0-2) ...
Setting up hwinfo (16.0-2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
sudo: unable to resolve host bud-Latitude-D530
*-network UNCLAIMED
description: Network controller
product: BCM4312 802.11b/g LP-PHY
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:0c:00.0
version: 01
width: 64 bits
clock: 33MHz
resources: memory:
*-network
description: Ethernet interface
product: NetXtreme BCM5755M Gigabit Ethernet PCI Express
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:09:00.0
logical name: eth0
version: 02
serial: 00:1d:09:c9:8a:37
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
resources: irq:43 memory:
0: dell-wifi: Wireless LAN
Soft blocked: yes
Hard blocked: yes
sudo: unable to resolve host bud-Latitude-D530
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
vboxnet0 Interface doesn't support scanning.
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c)
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 0c)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02)
00:1f.2 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller [8086:2828] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
03:01.0 CardBus bridge [0607]: O2 Micro, Inc. Cardbus bridge [1217:7135] (rev 21)
03:01.4 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02)
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express [14e4:1673] (rev 02)
0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
sudo: unable to resolve host bud-Latitude-D530
H/W path Device Class Description
=======
/0 bus 0HP728
/0/0 memory 64KiB BIOS
/0/400 processor Intel(R) Core(TM)2 Duo CPU T7
/0/400/700 memory 32KiB L1 cache
/0/400/701 memory 2MiB L2 cache
/0/400/0.1 processor Logical CPU
/0/400/0.2 processor Logical CPU
/0/1000 memory 2GiB System Memory
/0/1000/0 memory 1GiB DIMM DDR Synchronous 667 MHz
/0/1000/1 memory 1GiB DIMM DDR Synchronous 667 MHz
/0/100 bridge Mobile PM965/GM965/GL960 Memory C
/0/100/2 display Mobile GM965/GL960 Integrated Gra
/0/100/2.1 display Mobile GM965/GL960 Integrated Gra
/0/100/1a bus 82801H (ICH8 Family) USB UHCI Con
/0/100/1a.1 bus 82801H (ICH8 Family) USB UHCI Con
/0/100/1a.7 bus 82801H (ICH8 Family) USB2 EHCI Co
/0/100/1b multimedia 82801H (ICH8 Family) HD Audio Con
/0/100/1c bridge 82801H (ICH8 Family) PCI Express
/0/100/1c.1 bridge 82801H (ICH8 Family) PCI Express
/0/100/1c.1/0 network BCM4312 802.11b/g LP-PHY
/0/100/1c.5 bridge 82801H (ICH8 Family) PCI Express
/0/100/1c.5/0 eth0 network NetXtreme BCM5755M Gigabit Ethern
/0/100/1d bus 82801H (ICH8 Family) USB UHCI Con
/0/100/1d.1 bus 82801H (ICH8 Family) USB UHCI Con
/0/100/1d.2 bus 82801H (ICH8 Family) USB UHCI Con
/0/100/1d.7 bus 82801H (ICH8 Family) USB2 EHCI Co
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1e/1 bridge Cardbus bridge
/0/100/1e/1.4 bus Firewire (IEEE 1394)
/0/100/1f bridge 82801HEM (ICH8M) LPC Interface Co
/0/100/1f.1 scsi0 storage 82801HBM/HEM (ICH8M/ICH8M-E) IDE
/0/100/1f.1/0.0.0 /dev/cdrom disk DVD+-RW GSA-T21N
/0/100/1f.2 scsi2 storage 82801HBM/HEM (ICH8M/ICH8M-E) SATA
/0/100/1f.2/0.0.0 /dev/sda disk 120GB FUJITSU MHY2120B
/0/100/1f.2/0.0.0/1 /dev/sda1 volume 109GiB EXT4 volume
/0/100/1f.2/0.0.0/2 /dev/sda2 volume 2037MiB Extended partition
/0/100/
/0/100/1f.3 bus 82801H (ICH8 Family) SMBus Contro
/1 power DELL 00
Linux bud-Latitude-D530 2.6.38-11-generic #50-Ubuntu SMP Mon Sep 12 21:18:14 UTC 2011 i686 i686 i386 GNU/Linux
[ 0.216288] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.433258] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.433266] HEST: Table not found.
[ 0.550019] usbcore: registered new interface driver usbfs
[ 0.550051] usbcore: registered new interface driver hub
[ 0.550124] usbcore: registered new device driver usb
[ 0.556122] Switching to clocksource hpet
[ 0.558981] Switched to NOHz mode on CPU #0
[ 0.559053] Switched to NOHz mode on CPU #1
[ 0.660507] pnp: PnP ACPI: found 14 devices
[ 0.738747] input: Lid Switch as /devices/
[ 0.808049] ACPI: Lid Switch [LID]
[ 0.970341] ERST: Table is not found!
[ 1.368463] isapnp: No Plug & Play device found
[ 1.417802] i2c-core: driver [adp5520] using legacy suspend method
[ 1.417808] i2c-core: driver [adp5520] using legacy resume method
[ 1.600686] hub 1-0:1.0: USB hub found
[ 1.620325] hub 2-0:1.0: USB hub found
[ 1.621214] hub 3-0:1.0: USB hub found
[ 1.621986] hub 4-0:1.0: USB hub found
[ 1.622730] hub 5-0:1.0: USB hub found
[ 1.623479] hub 6-0:1.0: USB hub found
[ 1.624258] hub 7-0:1.0: USB hub found
[ 1.629498] device-mapper: multipath: version 1.2.0 loaded
[ 1.629504] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.640103] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.526377] tg3 0000:09:00.0: eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:1d:09:c9:8a:37
[ 3.526393] tg3 0000:09:00.0: eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 3.526406] tg3 0000:09:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 3.526418] tg3 0000:09:00.0: eth0: dma_rwctrl[
[ 22.045275] lp: driver loaded but no devices found
[ 23.399465] ADDRCONF(
[ 23.683010] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:0200]
[ 24.809766] vboxdrv: Found 2 processor cores.
[ 25.167056] tg3 0000:09:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 25.167070] tg3 0000:09:00.0: eth0: Flow control is on for TX and on for RX
[ 25.167757] ADDRCONF(
[ 25.757613] Console: switching to colour frame buffer device 175x65
[ 25.800810] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.
[ 26.096781] input: HDA Intel Line In at Ext Left Jack as /devices/
[ 26.097159] input: HDA Intel HP Out at Ext Left Jack as /devices/
[ 32.790716] ADDRCONF(
[ 33.314500] ADDRCONF(
[ 34.928435] tg3 0000:09:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 34.928449] tg3 0000:09:00.0: eth0: Flow control is on for TX and on for RX
[ 34.929398] ADDRCONF(
[ 45.752025] eth0: no IPv6 routers present
sudo: unable to resolve host bud-Latitude-D530
Manufacturer: Dell Inc.
Product Name: Latitude D530
Manufacturer: Dell Inc.
Product Name: 0HP728
Manufacturer: Dell Inc.
Manufacturer: Intel
Manufacturer: 4000000000000000
Manufacturer: 4000000000000000
Manufacturer: Sony
SBDS Manufacture Date: 2011-01-09
lo no wireless extensions.
eth0 no wireless extensions.
vboxnet0 no wireless extensions.
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist wl
blacklist uart6850
blacklist twl4030_wdt
# wl module from Broadcom conflicts with ssb
blacklist b43legacy
blacklist b43
install wl /sbin/modprobe --ignore-install wl $CMDLINE_OPTS
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
sudo: unable to resolve host bud-Latitude-D530
> hal.1: read hal dataprocess 13832: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
27: PCI c00.0: 0280 Network controller
[Created at pci.318]
Unique ID: zb5c.IciJEdlj3K3
Parent ID: qTvu.fizfg8GMS23
SysFS ID: /devices/
SysFS BusID: 0000:0c:00.0
Hardware Class: network
Model: "Dell Wireless 1395 WLAN Mini-Card"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4315 "BCM4312 802.11b/g"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x000b "Wireless 1395 WLAN Mini-Card"
Revision: 0x01
Memory Range: 0xfe8fc000-
IRQ: 10 (no events)
Module Alias: "pci:v000014E4d
Driver Info #0:
Driver Status: ssb is not active
Driver Activation Cmd: "modprobe ssb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #16 (PCI bridge)
28: PCI 900.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.3fT5pJWcjDC
Parent ID: HnsE.n0XfWiC+f66
SysFS ID: /devices/
SysFS BusID: 0000:09:00.0
Hardware Class: network
Model: "Broadcom NetXtreme BCM5755M Gigabit Ethernet PCI Express"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x1673 "NetXtreme BCM5755M Gigabit Ethernet PCI Express"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0200
Revision: 0x02
Driver: "tg3"
Driver Modules: "tg3"
Device File: eth0
Memory Range: 0xfe7f0000-
IRQ: 43 (128045 events)
HW Address: 00:1d:09:c9:8a:37
Link detected: yes
Module Alias: "pci:v000014E4d
Driver Info #0:
Driver Status: tg3 is active
Driver Activation Cmd: "modprobe tg3"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #17 (PCI bridge)
Warning: bad ps syntax, perhaps a bogus '-'? See http://
root 562 0.0 0.1 25496 4060 ? Ssl Oct12 0:00 NetworkManager
root 877 0.1 0.3 21444 7008 ? S Oct12 1:17 /usr/bin/python -O /usr/share/
root 999 0.0 0.3 12080 7560 ? S Oct12 0:30 /usr/bin/python -O /usr/share/
bud 1332 0.0 0.8 50628 18044 ? Sl Oct12 0:00 /usr/bin/python -O /usr/share/
root 1499 0.0 0.0 2552 628 ? Ss Oct12 0:00 /sbin/dhclient -v -cf /var/lib/
root 1566 0.0 0.0 2552 1240 ? S Oct12 0:00 /sbin/dhclient -d -4 -sf /usr/lib/
bud 13847 0.0 0.0 4148 852 pts/0 S+ 10:10 0:00 egrep --color=auto icd|etwork
sudo: unable to resolve host bud-Latitude-D530
Module Size Used by
binfmt_misc 13213 1
parport_pc 32111 0
ppdev 12849 0
snd_hda_codec_idt 60537 1
snd_hda_intel 24113 2
snd_hda_codec 90901 2 snd_hda_
snd_hwdep 13274 1 snd_hda_codec
snd_pcm 80042 2 snd_hda_
snd_seq_midi 13132 0
vboxnetadp 13323 0
vboxnetflt 27855 0
snd_rawmidi 25269 1 snd_seq_midi
vboxdrv 219250 2 vboxnetadp,
snd_seq_midi_event 14475 1 snd_seq_midi
snd_seq 51291 2 snd_seq_
i915 451033 3
joydev 17322 0
dell_wmi 12601 0
sparse_keymap 13666 1 dell_wmi
dell_laptop 13515 0
pcmcia 39671 0
snd_timer 28659 2 snd_pcm,snd_seq
dcdbas 14054 1 dell_laptop
yenta_socket 27230 0
snd_seq_device 14110 3 snd_seq_
psmouse 73312 0
drm_kms_helper 40745 1 i915
serio_raw 12990 0
drm 184164 4 i915,drm_kms_helper
pcmcia_rsrc 18292 1 yenta_socket
pcmcia_core 21505 3 pcmcia,
snd 55295 13 snd_hda_
soundcore 12600 1 snd
snd_page_alloc 14073 2 snd_hda_
i2c_algo_bit 13184 1 i915
video 18951 1 i915
lp 13349 0
parport 36746 3 parport_pc,ppdev,lp
firewire_ohci 31504 0
tg3 131476 0
firewire_core 56138 1 firewire_ohci
crc_itu_t 12627 1 firewire_core
bud@bud-
|
Revision history for this message
|
#3 |
Hi,
You need to install the following Broadcom driver package using apt-get or Synaptic package manager: bcmwl-kernel-source
This will of course require a working wirED Internet connection in Ubuntu. (wired, not wireless)
For example: using the Terminal, you need to run the following commands to install bcmwl-kernel-
sudo apt-get update
sudo apt-get install bcmwl-kernel-source
Also run the following command:
gksudo gedit /etc/modprobe.
Using the gedit editor, DELETE the following configuration line:
blacklist wl
SAVE the change to the /etc/modprobe.
The problem is that you have blacklisted the wireless driver (wl driver) that you actually need to activate in order to get wireless working....
Then reboot and retest wireless using Network Manager.
Regards,
Mark
|
Revision history for this message
|
#4 |
Hello Mark
I performed the above instructions, but as you can see, there is no blacklist wl. Is there something else in the blacklist that is preventing the wireless card from activation? Do I need the BCM wl driver?
|
Revision history for this message
|
#5 |
Please resend the output of the following command:
sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/
|
Revision history for this message
|
#6 |
[sudo] password for bud:
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Reading package lists... Done
sudo: unable to resolve host bud-Latitude-D530
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
hwinfo is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 26 not upgraded.
sudo: unable to resolve host bud-Latitude-D530
Hardware Lister (lshw) - B.02.15
usage: lshw [-format] [-options ...]
lshw -version
-version print program version (B.02.15)
format can be
-html output hardware tree as HTML
-xml output hardware tree as XML
-short output hardware paths
-businfo output bus information
options can be
-class CLASS only show a certain class of hardware
-C CLASS same as '-class CLASS'
-c CLASS same as '-class CLASS'
-disable TEST disable a test (like pci, isapnp, cpuid, etc. )
-enable TEST enable a test (like pci, isapnp, cpuid, etc. )
-quiet don't display status
-sanitize sanitize output (remove sensitive information like serial numbers, etc.)
-numeric output numeric IDs (for PCI, USB, etc.)
|
Revision history for this message
|
#7 |
Seven hours ago, you correctly copy-pasted my command, but not this time. Why?
The output is incorrect and probably due to chopping my original command into pieces.
PLEASE reread what I wrote in step TWO:
Step 2: Please copy-paste the following command from https:/
|
Revision history for this message
|
#8 |
Please find attached additional data requested, thanks for your help.
New question #174208 on Ubuntu:
https:/
This is for Mark:
I reread instructions and invoked all of the commands per last commucication. Not sure why I cannot see Broadcom Sta driver?
bud@bud-
sudo: unable to resolve host bud-Latitude-D530
[sudo] password for bud:
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Hit http://
Hit http://
Ign http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Reading package lists... Done
sudo: unable to resolve host bud-Latitude-D530
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
hwinfo is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 26 not upgraded.
sudo: unable to resolve host bud-Latitude-D530
*-network
description: Wireless interface
product: BCM4312 802.11b/g LP-PHY
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:0c:00.0
logical name: eth1
version: 01
serial: 00:1f:3a:7f:3a:01
width: 64 bits
clock: 33MHz
resources: irq:17 memory:
*-network
description: Ethernet interface
product: NetXtreme BCM5755M Gigabit Ethernet PCI Express
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:09:00.0
logical name: eth0
version: 02
serial: 00:1d:09:c9:8a:37
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
resources: irq:43 memory:
0: brcmwl-0: Wireless LAN
Soft blocked: no
Hard blocked: yes
1: dell-wifi: Wireless LAN
Soft blocked: yes
Hard blocked: yes
sudo: unable to resolve host bud-Latitude-D530
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
eth1 Failed to read scan data : Invalid argument
vboxnet0 Interface doesn't support scanning.
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c)
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 0c)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02)
00:1f.2 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller [8086:2828] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
03:01.0 CardBus bridge [0607]: O2 Micro, Inc. Cardbus bridge [1217:7135] (rev 21)
03:01.4 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02)
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express [14e4:1673] (rev 02)
0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
sudo: unable to resolve host bud-Latitude-D530
H/W path Device Class Description
=======
/0 bus 0HP728
/0/0 memory 64KiB BIOS
/0/400 processor Intel(R) Core(TM)2 Duo CPU T7
/0/400/700 memory 32KiB L1 cache
/0/400/701 memory 2MiB L2 cache
/0/400/1.1 processor Logical CPU
/0/400/1.2 processor Logical CPU
/0/1000 memory 2GiB System Memory
/0/1000/0 memory 1GiB DIMM DDR Synchronous 667 MHz
/0/1000/1 memory 1GiB DIMM DDR Synchronous 667 MHz
/0/100 bridge Mobile PM965/GM965/GL960 Memory C
/0/100/2 display Mobile GM965/GL960 Integrated Gra
/0/100/2.1 display Mobile GM965/GL960 Integrated Gra
/0/100/1a bus 82801H (ICH8 Family) USB UHCI Con
/0/100/1a.1 bus 82801H (ICH8 Family) USB UHCI Con
/0/100/1a.7 bus 82801H (ICH8 Family) USB2 EHCI Co
/0/100/1b multimedia 82801H (ICH8 Family) HD Audio Con
/0/100/1c bridge 82801H (ICH8 Family) PCI Express
/0/100/1c.1 bridge 82801H (ICH8 Family) PCI Express
/0/100/1c.1/0 eth1 network BCM4312 802.11b/g LP-PHY
/0/100/1c.5 bridge 82801H (ICH8 Family) PCI Express
/0/100/1c.5/0 eth0 network NetXtreme BCM5755M Gigabit Ethern
/0/100/1d bus 82801H (ICH8 Family) USB UHCI Con
/0/100/1d.1 bus 82801H (ICH8 Family) USB UHCI Con
/0/100/1d.2 bus 82801H (ICH8 Family) USB UHCI Con
/0/100/1d.7 bus 82801H (ICH8 Family) USB2 EHCI Co
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1e/1 bridge Cardbus bridge
/0/100/1e/1.4 bus Firewire (IEEE 1394)
/0/100/1f bridge 82801HEM (ICH8M) LPC Interface Co
/0/100/1f.1 scsi0 storage 82801HBM/HEM (ICH8M/ICH8M-E) IDE
/0/100/1f.1/0.0.0 /dev/cdrom disk DVD+-RW GSA-T21N
/0/100/1f.2 scsi2 storage 82801HBM/HEM (ICH8M/ICH8M-E) SATA
/0/100/1f.2/0.0.0 /dev/sda disk 120GB FUJITSU MHY2120B
/0/100/1f.2/0.0.0/1 /dev/sda1 volume 109GiB EXT4 volume
/0/100/1f.2/0.0.0/2 /dev/sda2 volume 2037MiB Extended partition
/0/100/
/0/100/1f.3 bus 82801H (ICH8 Family) SMBus Contro
/1 power DELL 00
Linux bud-Latitude-D530 2.6.38-11-generic #50-Ubuntu SMP Mon Sep 12 21:18:14 UTC 2011 i686 i686 i386 GNU/Linux
[ 0.216292] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.410690] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.410701] HEST: Table not found.
[ 0.538146] usbcore: registered new interface driver usbfs
[ 0.538179] usbcore: registered new interface driver hub
[ 0.538249] usbcore: registered new device driver usb
[ 0.544570] Switching to clocksource hpet
[ 0.547277] Switched to NOHz mode on CPU #0
[ 0.547439] Switched to NOHz mode on CPU #1
[ 0.648299] pnp: PnP ACPI: found 14 devices
[ 0.726587] input: Lid Switch as /devices/
[ 0.800050] ACPI: Lid Switch [LID]
[ 0.962060] ERST: Table is not found!
[ 1.359117] isapnp: No Plug & Play device found
[ 1.405561] i2c-core: driver [adp5520] using legacy suspend method
[ 1.405565] i2c-core: driver [adp5520] using legacy resume method
[ 1.604360] hub 1-0:1.0: USB hub found
[ 1.624328] hub 2-0:1.0: USB hub found
[ 1.625194] hub 3-0:1.0: USB hub found
[ 1.625960] hub 4-0:1.0: USB hub found
[ 1.628427] hub 5-0:1.0: USB hub found
[ 1.629173] hub 6-0:1.0: USB hub found
[ 1.629944] hub 7-0:1.0: USB hub found
[ 1.634954] device-mapper: multipath: version 1.2.0 loaded
[ 1.634961] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.645950] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.514049] tg3 0000:09:00.0: eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:1d:09:c9:8a:37
[ 3.514069] tg3 0000:09:00.0: eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 3.514083] tg3 0000:09:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 3.514095] tg3 0000:09:00.0: eth0: dma_rwctrl[
[ 22.096549] lp: driver loaded but no devices found
[ 23.163809] ADDRCONF(
[ 23.304334] wl: module license 'MIXED/Proprietary' taints kernel.
[ 23.464365] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:0200]
[ 23.467033] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 23.467062] wl 0000:0c:00.0: setting latency timer to 64
[ 23.525966] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38
[ 24.743312] tg3 0000:09:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 24.743326] tg3 0000:09:00.0: eth0: Flow control is on for TX and on for RX
[ 24.744196] ADDRCONF(
[ 24.893694] vboxdrv: Found 2 processor cores.
[ 26.234092] Console: switching to colour frame buffer device 175x65
[ 26.281381] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.
[ 26.549232] input: HDA Intel Line In at Ext Left Jack as /devices/
[ 26.550091] input: HDA Intel HP Out at Ext Left Jack as /devices/
[ 32.983141] ADDRCONF(
[ 33.641271] ADDRCONF(
[ 35.193547] tg3 0000:09:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 35.193561] tg3 0000:09:00.0: eth0: Flow control is on for TX and on for RX
[ 35.195668] ADDRCONF(
[ 42.768062] eth1: no IPv6 routers present
[ 45.888036] eth0: no IPv6 routers present
sudo: unable to resolve host bud-Latitude-D530
Manufacturer: Dell Inc.
Product Name: Latitude D530
Manufacturer: Dell Inc.
Product Name: 0HP728
Manufacturer: Dell Inc.
Manufacturer: Intel
Manufacturer: 4000000000000000
Manufacturer: 4000000000000000
Manufacturer: Sony
SBDS Manufacture Date: 2011-01-09
lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11 Access Point: Not-Associated
Link Quality:5 Signal level:0 Noise level:0
Rx invalid nwid:0 invalid crypt:0 invalid misc:0
vboxnet0 no wireless extensions.
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
# Warning: This file is autogenerated by bcmwl. All changes to this file will be lost.
blacklist b43
blacklist b43legacy
blacklist bcm43xx
blacklist brcm80211
# blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
# wl module from Broadcom conflicts with ssb
blacklist b43legacy
blacklist b43
install wl /sbin/modprobe --ignore-install wl $CMDLINE_OPTS
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
sudo: unable to resolve host bud-Latitude-D530
> hal.1: read hal dataprocess 2238: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
27: PCI c00.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: JNkJ.K1bklAmqTZ1
Parent ID: qTvu.fizfg8GMS23
SysFS ID: /devices/
SysFS BusID: 0000:0c:00.0
Hardware Class: network
Model: "Dell Wireless 1395 WLAN Mini-Card"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4315 "BCM4312 802.11b/g"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x000b "Wireless 1395 WLAN Mini-Card"
Revision: 0x01
Driver: "wl"
Driver Modules: "wl"
Device File: eth1
Features: WLAN
Memory Range: 0xfe8fc000-
IRQ: 17 (11286 events)
HW Address: 00:1f:3a:7f:3a:01
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462
WLAN bitrates: 1 2 5.5 6 9 11 12 18 24 36 48 54
WLAN encryption modes: WEP40 WEP104 WEP256 WEP128 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v000014E4d
Driver Info #0:
Driver Status: ssb is not active
Driver Activation Cmd: "modprobe ssb"
Driver Info #1:
Driver Status: wl is active
Driver Activation Cmd: "modprobe wl"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #16 (PCI bridge)
28: PCI 900.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.3fT5pJWcjDC
Parent ID: HnsE.n0XfWiC+f66
SysFS ID: /devices/
SysFS BusID: 0000:09:00.0
Hardware Class: network
Model: "Broadcom NetXtreme BCM5755M Gigabit Ethernet PCI Express"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x1673 "NetXtreme BCM5755M Gigabit Ethernet PCI Express"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0200
Revision: 0x02
Driver: "tg3"
Driver Modules: "tg3"
Device File: eth0
Memory Range: 0xfe7f0000-
IRQ: 43 (4587 events)
HW Address: 00:1d:09:c9:8a:37
Link detected: yes
Module Alias: "pci:v000014E4d
Driver Info #0:
Driver Status: tg3 is active
Driver Activation Cmd: "modprobe tg3"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #17 (PCI bridge)
Warning: bad ps syntax, perhaps a bogus '-'? See http://
root 481 0.0 0.2 26520 4524 ? Ssl 18:46 0:00 NetworkManager
root 850 0.2 0.3 21424 7004 ? S 18:47 0:01 /usr/bin/python -O /usr/share/
root 890 0.1 0.3 12076 7564 ? S 18:47 0:00 /usr/bin/python -O /usr/share/
bud 1323 0.1 0.8 49528 18160 ? Sl 18:47 0:00 /usr/bin/python -O /usr/share/
root 1505 0.0 0.0 2552 396 ? Ss 18:47 0:00 /sbin/dhclient -v -cf /var/lib/
root 1557 0.0 0.0 2552 1248 ? S 18:47 0:00 /sbin/dhclient -d -4 -sf /usr/lib/
bud 2255 0.0 0.0 4148 852 pts/0 S+ 18:53 0:00 egrep --color=auto icd|etwork
sudo: unable to resolve host bud-Latitude-D530
Module Size Used by
parport_pc 32111 0
ppdev 12849 0
snd_hda_codec_idt 60537 1
binfmt_misc 13213 1
snd_hda_intel 24113 2
i915 451033 3
snd_hda_codec 90901 2 snd_hda_
snd_hwdep 13274 1 snd_hda_codec
snd_pcm 80042 2 snd_hda_
snd_seq_midi 13132 0
snd_rawmidi 25269 1 snd_seq_midi
snd_seq_midi_event 14475 1 snd_seq_midi
joydev 17322 0
vboxnetadp 13323 0
snd_seq 51291 2 snd_seq_
vboxnetflt 27855 0
drm_kms_helper 40745 1 i915
dell_wmi 12601 0
vboxdrv 219250 2 vboxnetadp,
sparse_keymap 13666 1 dell_wmi
dell_laptop 13515 0
drm 184164 4 i915,drm_kms_helper
dcdbas 14054 1 dell_laptop
pcmcia 39671 0
snd_timer 28659 2 snd_pcm,snd_seq
snd_seq_device 14110 3 snd_seq_
psmouse 73312 0
lib80211_crypt_tkip 17203 0
wl 2642531 0
yenta_socket 27230 0
serio_raw 12990 0
snd 55295 13 snd_hda_
pcmcia_rsrc 18292 1 yenta_socket
pcmcia_core 21505 3 pcmcia,
soundcore 12600 1 snd
lib80211 14570 2 lib80211_
snd_page_alloc 14073 2 snd_hda_
i2c_algo_bit 13184 1 i915
video 18951 1 i915
lp 13349 0
parport 36746 3 parport_pc,ppdev,lp
firewire_ohci 31504 0
firewire_core 56138 1 firewire_ohci
tg3 131476 0
crc_itu_t 12627 1 firewire_core
bud@bud-
--
You received this question notification because you asked the question.
|
Revision history for this message
|
#9 |
Your wireless issue looks very similar to the following issue, which was solved:
https:/
The following Terminal output (that you sent us) shows the issue that your wireless card is
having
"
0: brcmwl-0: Wireless LAN
Soft blocked: no
Hard blocked: yes
1: dell-wifi: Wireless LAN
Soft blocked: yes
Hard blocked: yes
eth1 Failed to read scan data : Invalid argument
"
So your wireless card is disabled by a hardware switch, a
special key combination (Fn-F2, etc...), by incorrect BIOS settings for
wireless, or a COMBINATION of these factors...
There might also be a BIOS option that allows you to have the wireless
functionality controlled "By application"
Search for the "by application" option in the BIOS and select it (if
possible)....
Then reboot and retest wireless using wicd (network manager).
Also run the following 2 Terminal commands to try to change the rfkill
state of your wireless chipset after rebooting:
rfkill unblock all
sudo rfkill unblock all
Then retest wireless using wicd (network manager).
|
Revision history for this message
|
#10 |
Oops, I see that you already tried my very last suggestion and mentioned it in the description!
Well, Ubuntu 11.10 has been released yesterday. I suggest installing and testing wireless using Ubuntu 11.10
Sorry, but I have no further suggestions to make....
Can you help with this problem?
Provide an answer of your own, or ask Harold Heinbaugh for more information if necessary.
