Cant use wifi after installing 11.04
I have installed 11.04 but now I can not use my wireless system, I have a CQ60-305sa.
Any help would be useful
Question information
- Language:
- English Edit question
- Status:
- Expired
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Related bugs
Related FAQ:
None Link to a FAQ
Revision history for this message
|
#1 |
Please refer to http://
Revision history for this message
|
#2 |
Hi,
Please first connect your wired network adapter to the wireless router using an ethernet cable (also known as a LAN cable).
In order to gather essential troubleshooting information about your wireless card, please follow this procedure:
Step 1:
If you are using the Gnome interface, open the Terminal console via "Applications-
If you are using the Unity interface, the easiest way to open the Terminal is to use the 'search' function on the dash. Or you can click on the 'More Apps' button, click on the 'See more results' by the installed section, and find it in that list of applications. A third way, available after you click on the 'More Apps' button, is to go to the search bar, and see that the far right end of it says 'All Applications'. You then click on that, and you'll see the full list. Then you can go to Accessories > Terminal after that.
So the methods in Unity are:
Dash > Search for Terminal
Dash > More Apps > 'See More Results' > Terminal
Dash > More Apps > Accessories > Terminal
Step 2: Please copy-paste the following command from the https:/
Tip: If you have a wheel mouse or 3 button mouse you do not need to type commands into the Terminal. Highlight the command written on the page. Move your cursor anywhere in the Terminal and press the wheel or middle button. Automatic Copy and paste! No spelling mistakes! No Typos! No other errors!
sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/
Step 3: Please post results (copy/paste terminal output) on this thread. The troubleshooters here need to see the full Terminal output from running the above command.
Step 4: Please also clarify if you installed Ubuntu to the harddisk and are running from a harddisk install OR if you are only testing Ubuntu in a LiveCD session.
Regards,
Mark
Revision history for this message
|
#3 |
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
The following extra packages will be installed:
libhal1 libhd16
The following NEW packages will be installed
hwinfo libhal1 libhd16
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 818 kB of archives.
After this operation, 2,269 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://
Get:2 http://
Get:3 http://
Fetched 818 kB in 4s (198 kB/s)
Selecting previously deselected package libhal1.
(Reading database ... 139354 files and directories currently installed.)
Unpacking libhal1 (from .../libhal1_
Selecting previously deselected package libhd16.
Unpacking libhd16 (from .../libhd16_
Selecting previously deselected package hwinfo.
Unpacking hwinfo (from .../hwinfo_
Processing triggers for man-db ...
Setting up libhal1 (0.5.14-5+svn1) ...
Setting up libhd16 (16.0-2) ...
Setting up hwinfo (16.0-2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
*-network
description: Ethernet interface
product: MCP77 Ethernet
vendor: nVidia Corporation
physical id: a
bus info: pci@0000:00:0a.0
logical name: eth0
version: a2
serial: 00:1f:16:71:88:a4
size: 100Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 66MHz
resources: irq:41 memory:
*-network
description: Wireless interface
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:07:00.0
logical name: wlan0
version: 01
serial: 00:24:2b:98:26:6a
width: 64 bits
clock: 33MHz
resources: irq:23 memory:
0: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Device or resource busy
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
00:01.0 ISA bridge [0601]: nVidia Corporation Device [10de:075e] (rev a2)
00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1)
00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1)
00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1)
00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1)
00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1)
00:07.0 Audio device [0403]: nVidia Corporation MCP72XE/
00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1)
00:09.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2)
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet [10de:0760] (rev a2)
00:0b.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0569] (rev a1)
00:14.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40)
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303]
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304]
02:00.0 VGA compatible controller [0300]: nVidia Corporation C77 [GeForce 8200M G] [10de:0845] (rev a2)
07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
Bus 004 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04f2:b091 Chicony Electronics Co., Ltd Webcam
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
H/W path Device Class Description
=======
/0 bus 303C
/0/0 memory 102KiB BIOS
/0/3 processor AMD Sempron(tm) SI-42
/0/3/5 memory 128KiB L1 cache
/0/3/6 memory 512KiB L2 cache
/0/4 memory 1GiB System Memory
/0/4/0 memory 1GiB DIMM DRAM Synchronous 667 MHz (1.5 ns)
/0/4/1 memory DIMM DRAM 667 MHz (1.5 ns) [empty]
/0/5 memory RAM memory
/0/1 bridge nVidia Corporation
/0/1.1 bus MCP78S [GeForce 8200] SMBus
/0/1.3 processor MCP78S [GeForce 8200] Co-Processor
/0/1.4 memory RAM memory
/0/2 bus MCP78S [GeForce 8200] OHCI USB 1.1 Controlle
/0/2.1 bus MCP78S [GeForce 8200] EHCI USB 2.0 Controlle
/0/b bus MCP78S [GeForce 8200] OHCI USB 1.1 Controlle
/0/4.1 bus MCP78S [GeForce 8200] EHCI USB 2.0 Controlle
/0/6 storage MCP78S [GeForce 8200] IDE
/0/7 multimedia MCP72XE/
/0/8 bridge MCP78S [GeForce 8200] PCI Bridge
/0/9 scsi3 storage MCP78S [GeForce 8200] SATA Controller (non-A
/0/9/0 /dev/cdrom disk CDDVDW TS-L633M
/0/9/1 /dev/sda disk 160GB ST9160310AS
/0/9/1/1 /dev/sda1 volume 146GiB EXT4 volume
/0/9/1/2 /dev/sda2 volume 2997MiB Extended partition
/0/9/1/2/5 /dev/sda5 volume 2997MiB Linux swap / Solaris partition
/0/a eth0 network MCP77 Ethernet
/0/100 bridge MCP78S [GeForce 8200] PCI Express Bridge
/0/100/0 display C77 [GeForce 8200M G]
/0/14 bridge MCP78S [GeForce 8200] PCI Bridge
/0/14/0 wlan0 network AR5001 Wireless Network Adapter
/0/101 bridge Family 11h Processor HyperTransport Configur
/0/102 bridge Family 11h Processor Address Map
/0/103 bridge Family 11h Processor DRAM Controller
/0/104 bridge Family 11h Processor Miscellaneous Control
/0/105 bridge Family 11h Processor Link Control
/0/c scsi2 storage
/0/c/0.0.0 /dev/sdb disk SCSI Disk
Linux chris-Compaq-
[ 0.000000] DMI: Hewlett-Packard Compaq Presario CQ60 Notebook PC/303C, BIOS F.3A 05/07/2009
[ 0.000000] found SMP MP-table at [c00f7ff0] f7ff0
[ 0.008341] SMP alternatives: switching to UP code
[ 0.075312] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.102006] ACPI: No dock devices found.
[ 0.102008] HEST: Table not found.
[ 0.120885] usbcore: registered new interface driver usbfs
[ 0.120898] usbcore: registered new interface driver hub
[ 0.120927] usbcore: registered new device driver usb
[ 0.124052] Switching to clocksource hpet
[ 0.127976] Switched to NOHz mode on CPU #0
[ 0.136484] pnp: PnP ACPI: found 12 devices
[ 0.223737] input: Lid Switch as /devices/
[ 0.225588] ACPI: Lid Switch [LID0]
[ 0.256426] ERST: Table is not found!
[ 0.259978] i2c-core: driver [adp5520] using legacy suspend method
[ 0.259980] i2c-core: driver [adp5520] using legacy resume method
[ 0.315056] hub 1-0:1.0: USB hub found
[ 0.492347] hub 2-0:1.0: USB hub found
[ 0.586511] hub 3-0:1.0: USB hub found
[ 0.652173] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 0.670234] hub 4-0:1.0: USB hub found
[ 0.746569] isapnp: No Plug & Play device found
[ 0.768191] device-mapper: multipath: version 1.2.0 loaded
[ 0.768196] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.771370] powernow-k8: Found 1 AMD Sempron(tm) SI-42 (1 cpu cores) (version 2.20.00)
[ 0.772318] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.948047] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 1.176030] Switching to clocksource tsc
[ 1.342432] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.342664] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
[ 1.342670] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.353771] usbcore: registered new interface driver uas
[ 1.504750] scsi2 : usb-storage 1-1:1.0
[ 1.505064] usbcore: registered new interface driver usb-storage
[ 1.865145] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1f:16:71:88:a4
[ 1.865151] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt lnktim msi desc-v3
[ 15.252458] lp: driver loaded but no devices found
[ 16.511883] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 16.512010] forcedeth 0000:00:0a.0: eth0: no link during initialization
[ 16.517636] ADDRCONF(
[ 16.773549] uvcvideo: Found UVC 1.00 device CNF7047 (04f2:b091)
[ 16.798703] input: CNF7047 as /devices/
[ 16.801017] usbcore: registered new interface driver uvcvideo
[ 17.755593] ath5k 0000:07:00.0: PCI INT A -> Link[Z012] -> GSI 23 (level, low) -> IRQ 23
[ 17.755607] ath5k 0000:07:00.0: setting latency timer to 64
[ 17.755669] ath5k 0000:07:00.0: registered as 'phy0'
[ 18.307621] ath: EEPROM regdomain: 0x67
[ 18.307623] ath: EEPROM indicates we should expect a direct regpair map
[ 18.307627] ath: Country alpha2 being used: 00
[ 18.307629] ath: Regpair used: 0x67
[ 18.317218] Registered led device: ath5k-phy0::rx
[ 18.317308] Registered led device: ath5k-phy0::tx
[ 18.317319] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 18.365576] ADDRCONF(
[ 19.108342] input: HDA NVidia Mic as /devices/
[ 19.108608] input: HDA NVidia Mic as /devices/
[ 19.108822] input: HDA NVidia Headphone as /devices/
[ 19.557011] Console: switching to colour frame buffer device 80x30
[ 19.795359] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 47.626347] wlan0: authenticate with 00:21:04:82:96:da (try 1)
[ 47.628203] wlan0: authenticated
[ 47.628263] wlan0: associate with 00:21:04:82:96:da (try 1)
[ 47.631129] wlan0: RX AssocResp from 00:21:04:82:96:da (capab=0x431 status=0 aid=3)
[ 47.631135] wlan0: associated
[ 47.633292] ADDRCONF(
[ 58.256522] wlan0: no IPv6 routers present
[ 93.212074] wlan0: deauthenticating from 00:21:04:82:96:da by local choice (reason=3)
[ 336.276183] wlan0: authenticate with 00:21:04:82:96:da (try 1)
[ 336.303841] wlan0: authenticated
[ 336.303902] wlan0: associate with 00:21:04:82:96:da (try 1)
[ 336.314791] wlan0: RX AssocResp from 00:21:04:82:96:da (capab=0x431 status=0 aid=3)
[ 336.314799] wlan0: associated
[ 373.467948] forcedeth 0000:00:0a.0: eth0: link up
[ 373.468554] ADDRCONF(
[ 382.014342] wlan0: deauthenticating from 00:21:04:82:96:da by local choice (reason=3)
[ 383.504051] eth0: no IPv6 routers present
[ 6235.486446] forcedeth 0000:00:0a.0: eth0: link down
[ 6238.288810] forcedeth 0000:00:0a.0: eth0: link up
[ 7218.860291] usb 4-3: new low speed USB device using ohci_hcd and address 2
[ 7220.593206] input: PIXART USB OPTICAL MOUSE as /devices/
[ 7220.593733] generic-usb 0003:093A:
[ 7220.594158] usbcore: registered new interface driver usbhid
[ 7220.594163] usbhid: USB HID core driver
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:off/any
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
> hal.1: read hal dataprocess 15572: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
21: PCI 0a.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.HOUiokKC0A4
SysFS ID: /devices/
SysFS BusID: 0000:00:0a.0
Hardware Class: network
Model: "nVidia MCP78S [GeForce 8200] Ethernet"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0760 "MCP78S [GeForce 8200] Ethernet"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x360a
Revision: 0xa2
Driver: "forcedeth"
Driver Modules: "forcedeth"
Device File: eth0
Memory Range: 0xc0009000-
I/O Ports: 0x30f8-0x30ff (rw)
Memory Range: 0xc0007c00-
Memory Range: 0xc0007800-
IRQ: 41 (70801 events)
HW Address: 00:1f:16:71:88:a4
Link detected: yes
Module Alias: "pci:v000010DEd
Driver Info #0:
Driver Status: forcedeth is active
Driver Activation Cmd: "modprobe forcedeth"
Config Status: cfg=new, avail=yes, need=no, active=unknown
30: PCI 700.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: y9sn.9AnOduZyIOF
Parent ID: MZfG.4gyqmROFCTA
SysFS ID: /devices/
SysFS BusID: 0000:07:00.0
Hardware Class: network
Model: "Atheros AR242x 802.11abg Wireless PCI Express Adapter"
Vendor: pci 0x168c "Atheros Communications Inc."
Device: pci 0x001c "AR242x 802.11abg Wireless PCI Express Adapter"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x137b
Revision: 0x01
Driver: "ath5k"
Driver Modules: "ath5k"
Device File: wlan0
Features: WLAN
Memory Range: 0xc2000000-
IRQ: 23 (12425 events)
HW Address: 00:24:2b:98:26:6a
Link detected: no
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v0000168Cd
Driver Info #0:
Driver Status: ath5k is active
Driver Activation Cmd: "modprobe ath5k"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #23 (PCI bridge)
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
Module Size Used by
usbhid 41704 0
hid 77084 1 usbhid
cryptd 19801 0
aes_i586 16956 0
aes_generic 38023 1 aes_i586
parport_pc 32111 0
ppdev 12849 0
vesafb 13449 1
snd_hda_codec_hdmi 27479 1
snd_hda_
binfmt_misc 13213 1
joydev 17322 0
arc4 12473 2
snd_hda_intel 24140 2
snd_hda_codec 90901 3 snd_hda_
snd_hwdep 13274 1 snd_hda_codec
snd_pcm 80244 3 snd_hda_
snd_seq_midi 13132 0
ath5k 144412 0
snd_rawmidi 25269 1 snd_seq_midi
ath 19141 1 ath5k
mac80211 257001 1 ath5k
nvidia 7098106 36
snd_seq_midi_event 14475 1 snd_seq_midi
snd_seq 51291 2 snd_seq_
hp_wmi 13418 0
sparse_keymap 13666 1 hp_wmi
snd_timer 28659 2 snd_pcm,snd_seq
uvcvideo 66851 0
snd_seq_device 14110 3 snd_seq_
cfg80211 156212 3 ath5k,ath,mac80211
psmouse 73312 0
videodev 75143 1 uvcvideo
snd 55295 14 snd_hda_
serio_raw 12990 0
k10temp 12951 0
video 18951 0
soundcore 12600 1 snd
shpchp 32345 0
snd_page_alloc 14073 2 snd_hda_
i2c_nforce2 12906 0
lp 13349 0
parport 36746 3 parport_pc,ppdev,lp
usb_storage 43946 0
ahci 21591 2
uas 17676 0
forcedeth 58190 0
pata_amd 13762 0
libahci 25548 1 ahci
Revision history for this message
|
#4 |
I suspect that your PC is experiencing the following bug (probably a bug in network manager):
Revision history for this message
|
#6 |
This thread looks interesting as well: http://
Revision history for this message
|
#7 |
I told it to connect to the network but it connected then when I tried to go to a different site it cut out and disconnected
Revision history for this message
|
#8 |
not sure if it has changed but I have been trying to get it to work
not the reply is
Cell 10 - Address: C8:CD:72:A7:BD:29
Cell 11 - Address: 00:D0:44:B7:5E:AA
Cell 12 - Address: 00:22:3F:CF:63:EC
Cell 13 - Address: 06:D0:44:B7:5E:AA
Cell 14 - Address: 0A:D0:44:B7:5E:AA
auto wlan0
iface wlan0 inet dhcp
wpa-ssid BTHomeHUB9-2CCM
wpa-psk 8948577a36
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
00:01.0 ISA bridge [0601]: nVidia Corporation Device [10de:075e] (rev a2)
00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1)
00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1)
00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1)
00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1)
00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1)
00:07.0 Audio device [0403]: nVidia Corporation MCP72XE/
00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1)
00:09.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2)
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet [10de:0760] (rev a2)
00:0b.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0569] (rev a1)
00:14.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40)
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303]
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304]
02:00.0 VGA compatible controller [0300]: nVidia Corporation C77 [GeForce 8200M G] [10de:0845] (rev a2)
07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
Bus 004 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04f2:b091 Chicony Electronics Co., Ltd Webcam
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
H/W path Device Class Description
=======
/0 bus 303C
/0/0 memory 102KiB BIOS
/0/3 processor AMD Sempron(tm) SI-42
/0/3/5 memory 128KiB L1 cache
/0/3/6 memory 512KiB L2 cache
/0/4 memory 1GiB System Memory
/0/4/0 memory 1GiB DIMM DRAM Synchronous 667 MHz (1.5 ns)
/0/4/1 memory DIMM DRAM 667 MHz (1.5 ns) [empty]
/0/5 memory RAM memory
/0/1 bridge nVidia Corporation
/0/1.1 bus MCP78S [GeForce 8200] SMBus
/0/1.3 processor MCP78S [GeForce 8200] Co-Processor
/0/1.4 memory RAM memory
/0/2 bus MCP78S [GeForce 8200] OHCI USB 1.1 Controlle
/0/2.1 bus MCP78S [GeForce 8200] EHCI USB 2.0 Controlle
/0/b bus MCP78S [GeForce 8200] OHCI USB 1.1 Controlle
/0/4.1 bus MCP78S [GeForce 8200] EHCI USB 2.0 Controlle
/0/6 storage MCP78S [GeForce 8200] IDE
/0/7 multimedia MCP72XE/
/0/8 bridge MCP78S [GeForce 8200] PCI Bridge
/0/9 scsi3 storage MCP78S [GeForce 8200] SATA Controller (non-A
/0/9/0 /dev/cdrom disk CDDVDW TS-L633M
/0/9/1 /dev/sda disk 160GB ST9160310AS
/0/9/1/1 /dev/sda1 volume 146GiB EXT4 volume
/0/9/1/2 /dev/sda2 volume 2997MiB Extended partition
/0/9/1/2/5 /dev/sda5 volume 2997MiB Linux swap / Solaris partition
/0/a eth0 network MCP77 Ethernet
/0/100 bridge MCP78S [GeForce 8200] PCI Express Bridge
/0/100/0 display C77 [GeForce 8200M G]
/0/14 bridge MCP78S [GeForce 8200] PCI Bridge
/0/14/0 wlan0 network AR5001 Wireless Network Adapter
/0/101 bridge Family 11h Processor HyperTransport Configur
/0/102 bridge Family 11h Processor Address Map
/0/103 bridge Family 11h Processor DRAM Controller
/0/104 bridge Family 11h Processor Miscellaneous Control
/0/105 bridge Family 11h Processor Link Control
/0/c scsi2 storage
/0/c/0.0.0 /dev/sdb disk SCSI Disk
Linux chris-Compaq-
[ 0.000000] DMI: Hewlett-Packard Compaq Presario CQ60 Notebook PC/303C, BIOS F.3A 05/07/2009
[ 0.000000] found SMP MP-table at [c00f7ff0] f7ff0
[ 0.008345] SMP alternatives: switching to UP code
[ 0.075314] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.104285] ACPI: No dock devices found.
[ 0.104287] HEST: Table not found.
[ 0.121906] usbcore: registered new interface driver usbfs
[ 0.121921] usbcore: registered new interface driver hub
[ 0.121949] usbcore: registered new device driver usb
[ 0.128050] Switching to clocksource hpet
[ 0.131981] Switched to NOHz mode on CPU #0
[ 0.140057] pnp: PnP ACPI: found 12 devices
[ 0.227722] input: Lid Switch as /devices/
[ 0.229185] ACPI: Lid Switch [LID0]
[ 0.255918] ERST: Table is not found!
[ 0.259482] i2c-core: driver [adp5520] using legacy suspend method
[ 0.259485] i2c-core: driver [adp5520] using legacy resume method
[ 0.314601] hub 1-0:1.0: USB hub found
[ 0.364158] hub 2-0:1.0: USB hub found
[ 0.422407] hub 3-0:1.0: USB hub found
[ 0.501488] hub 4-0:1.0: USB hub found
[ 0.592047] device-mapper: multipath: version 1.2.0 loaded
[ 0.592052] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.593544] powernow-k8: Found 1 AMD Sempron(tm) SI-42 (1 cpu cores) (version 2.20.00)
[ 0.594414] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.759698] isapnp: No Plug & Play device found
[ 0.768057] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.081837] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 1.176040] Switching to clocksource tsc
[ 1.648055] usb 4-3: new low speed USB device using ohci_hcd and address 2
[ 1.779221] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.779456] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
[ 1.779462] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.782892] usbcore: registered new interface driver uas
[ 1.946563] scsi2 : usb-storage 1-1:1.0
[ 1.946870] usbcore: registered new interface driver usb-storage
[ 1.952934] input: PIXART USB OPTICAL MOUSE as /devices/
[ 1.953168] generic-usb 0003:093A:
[ 1.953376] usbcore: registered new interface driver usbhid
[ 1.953379] usbhid: USB HID core driver
[ 2.301130] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1f:16:71:88:a4
[ 2.301136] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt lnktim msi desc-v3
[ 19.076832] lp: driver loaded but no devices found
[ 20.112218] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 20.648707] uvcvideo: Found UVC 1.00 device CNF7047 (04f2:b091)
[ 20.710609] input: CNF7047 as /devices/
[ 20.710749] usbcore: registered new interface driver uvcvideo
[ 22.802301] ath5k 0000:07:00.0: PCI INT A -> Link[Z012] -> GSI 23 (level, low) -> IRQ 23
[ 22.802315] ath5k 0000:07:00.0: setting latency timer to 64
[ 22.802378] ath5k 0000:07:00.0: registered as 'phy0'
[ 23.410025] ath: EEPROM regdomain: 0x67
[ 23.410029] ath: EEPROM indicates we should expect a direct regpair map
[ 23.410034] ath: Country alpha2 being used: 00
[ 23.410036] ath: Regpair used: 0x67
[ 23.421621] Registered led device: ath5k-phy0::rx
[ 23.421644] Registered led device: ath5k-phy0::tx
[ 23.421653] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 23.496101] ADDRCONF(
[ 24.215593] input: HDA NVidia Mic as /devices/
[ 24.215860] input: HDA NVidia Mic as /devices/
[ 24.216269] input: HDA NVidia Headphone as /devices/
[ 24.439728] Console: switching to colour frame buffer device 80x30
[ 30.624149] eth0: no IPv6 routers present
[ 2687.681129] usb 4-3: USB disconnect, address 2
[ 4574.704559] usb 4-4: new low speed USB device using ohci_hcd and address 3
[ 4574.961335] input: PIXART USB OPTICAL MOUSE as /devices/
[ 4574.961616] generic-usb 0003:093A:
[ 5353.256236] forcedeth 0000:00:0a.0: eth0: link down
[ 5400.031741] forcedeth 0000:00:0a.0: eth0: link up
[ 6280.231994] forcedeth 0000:00:0a.0: eth0: link down
[ 6291.863635] forcedeth 0000:00:0a.0: eth0: link up
[ 6385.699420] forcedeth 0000:00:0a.0: eth0: link down
[ 6396.940260] forcedeth 0000:00:0a.0: eth0: link up
[ 6512.118945] forcedeth 0000:00:0a.0: eth0: link down
[ 6556.187727] forcedeth 0000:00:0a.0: eth0: link up
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:off/any
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
> hal.1: read hal dataprocess 3554: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
21: PCI 0a.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.HOUiokKC0A4
SysFS ID: /devices/
SysFS BusID: 0000:00:0a.0
Hardware Class: network
Model: "nVidia MCP78S [GeForce 8200] Ethernet"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0760 "MCP78S [GeForce 8200] Ethernet"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x360a
Revision: 0xa2
Driver: "forcedeth"
Driver Modules: "forcedeth"
Device File: eth0
Memory Range: 0xc0009000-
I/O Ports: 0x30f8-0x30ff (rw)
Memory Range: 0xc0007c00-
Memory Range: 0xc0007800-
IRQ: 41 (47973 events)
HW Address: 00:1f:16:71:88:a4
Link detected: yes
Module Alias: "pci:v000010DEd
Driver Info #0:
Driver Status: forcedeth is active
Driver Activation Cmd: "modprobe forcedeth"
Config Status: cfg=new, avail=yes, need=no, active=unknown
30: PCI 700.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: y9sn.9AnOduZyIOF
Parent ID: MZfG.4gyqmROFCTA
SysFS ID: /devices/
SysFS BusID: 0000:07:00.0
Hardware Class: network
Model: "Atheros AR242x 802.11abg Wireless PCI Express Adapter"
Vendor: pci 0x168c "Atheros Communications Inc."
Device: pci 0x001c "AR242x 802.11abg Wireless PCI Express Adapter"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x137b
Revision: 0x01
Driver: "ath5k"
Driver Modules: "ath5k"
Device File: wlan0
Features: WLAN
Memory Range: 0xc2000000-
IRQ: 23 (7721 events)
HW Address: 00:24:2b:98:26:6a
Link detected: no
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v0000168Cd
Driver Info #0:
Driver Status: ath5k is active
Driver Activation Cmd: "modprobe ath5k"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #23 (PCI bridge)
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
Module Size Used by
parport_pc 32111 0
ppdev 12849 0
vesafb 13449 1
snd_hda_codec_hdmi 27479 1
snd_hda_
arc4 12473 2
snd_hda_intel 24140 2
snd_hda_codec 90901 3 snd_hda_
snd_hwdep 13274 1 snd_hda_codec
snd_pcm 80244 3 snd_hda_
ath5k 144412 0
snd_seq_midi 13132 0
binfmt_misc 13213 1
snd_rawmidi 25269 1 snd_seq_midi
ath 19141 1 ath5k
nvidia 9766978 42
mac80211 257001 1 ath5k
snd_seq_midi_event 14475 1 snd_seq_midi
joydev 17322 0
snd_seq 51291 2 snd_seq_
hp_wmi 13418 0
sparse_keymap 13666 1 hp_wmi
uvcvideo 66851 0
snd_timer 28659 2 snd_pcm,snd_seq
snd_seq_device 14110 3 snd_seq_
cfg80211 156212 3 ath5k,ath,mac80211
snd 55295 14 snd_hda_
psmouse 73312 0
soundcore 12600 1 snd
serio_raw 12990 0
videodev 75143 1 uvcvideo
snd_page_alloc 14073 2 snd_hda_
k10temp 12951 0
video 18951 0
shpchp 32345 0
i2c_nforce2 12906 0
lp 13349 0
parport 36746 3 parport_pc,ppdev,lp
usbhid 41704 0
usb_storage 43946 0
hid 77084 1 usbhid
ahci 21591 2
uas 17676 0
libahci 25548 1 ahci
forcedeth 58190 0
pata_amd 13762 0
Revision history for this message
|
#9 |
This question was expired because it remained in the 'Needs information' state without activity for the last 15 days.