rtl8192se_check_hw_scan() -> Wireless Network controller [0280]: Realtek Semiconductor Co., Ltd. Device [10ec:8172] (rev 10) can detect but cannot connect to wireless access point using Toshiba Satellite L450D in Ubuntu 10.04 LTS -> Realtek 8172 wifi driver does not work with lucid 2.6.32-21-generic kernel, does work with out-of-tree driver
Hello,
I'm new to computers so please make your answers quite simple. thanks.
Today my uncle installed Ubuntu version 10.04 (successful) on my laptop but it cant find my network in the network manager.
I have already asked sky but they don't deal with Ubuntu.
Please ask if you need any more details.
Thanks
Question information
- Language:
- English Edit question
- Status:
- Solved
- Assignee:
- No assignee Edit question
- Solved by:
- Mark Rijckenberg
- Solved:
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
Hi,
Please first connect your WIRED network adapter to the wireless router using an ethernet cable (also known as a LAN cable).
In order to gather essential troubleshooting information about your wireless card, please follow this procedure:
Step 1: Open Terminal from "Applications-
Step 2: Please copy-paste the following command from the https:/
Tip: If you have a wheel mouse or 3 button mouse you do not need to type commands into the Terminal. Highlight the command written on the page. Move your cursor anywhere in the Terminal and press the wheel or middle button. Automatic Copy and paste! No spelling mistakes! No Typos! No other errors!
sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/
Step 3: Please post results (copy/paste terminal output) on this thread. The troubleshooters here need to see the full Terminal output from running the above command.
Step 4: Please also specify the exact model and make of your PC (if known) on this thread
Regards,
Mark
|
Revision history for this message
|
#2 |
thegreens@
[sudo] password for thegreens:
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get: 1 http://
Get: 2 http://
Get: 3 http://
Get: 4 http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Fetched 137kB in 5s (24.2kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
The following packages were automatically installed and are no longer required:
linux-
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
libhd16
The following NEW packages will be installed
hwinfo libhd16
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 744kB of archives.
After this operation, 2,060kB of additional disk space will be used.
Do you want to continue [Y/n]? Y
Get: 1 http://
Get: 2 http://
Fetched 744kB in 1s (571kB/s)
Selecting previously deselected package libhd16.
(Reading database ... 136839 files and directories currently installed.)
Unpacking libhd16 (from .../libhd16_
Selecting previously deselected package hwinfo.
Unpacking hwinfo (from .../hwinfo_
Processing triggers for man-db ...
Setting up libhd16 (16.0-2) ...
Setting up hwinfo (16.0-2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
*-network
description: Ethernet interface
product: ULi 1689,1573 integrated ethernet.
vendor: ALi Corporation
physical id: d
bus info: pci@0000:00:0d.0
logical name: eth0
version: 40
serial: 00:15:f2:47:63:5b
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
resources: irq:17 ioport:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 Host bridge [0600]: ALi Corporation M1689 K8 Northbridge [Super K8 Single Chip] [10b9:1689]
00:01.0 PCI bridge [0604]: ALi Corporation AGP8X Controller [10b9:5246]
00:02.0 PCI bridge [0604]: ALi Corporation M5249 HTT to PCI Bridge [10b9:5249]
00:03.0 ISA bridge [0601]: ALi Corporation M1563 HyperTransport South Bridge [10b9:1563] (rev 70)
00:03.1 Bridge [0680]: ALi Corporation M7101 Power Management Controller [PMU] [10b9:7101]
00:04.0 Multimedia audio controller [0401]: ALi Corporation M5455 PCI AC-Link Controller Audio Device [10b9:5455] (rev 20)
00:0d.0 Ethernet controller [0200]: ALi Corporation ULi 1689,1573 integrated ethernet. [10b9:5263] (rev 40)
00:0e.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c7)
00:0e.1 Mass storage controller [0180]: ALi Corporation ULi 5289 SATA [10b9:5289] (rev 10)
00:0f.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03)
00:0f.1 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03)
00:0f.2 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03)
00:0f.3 USB Controller [0c03]: ALi Corporation USB 2.0 Controller [10b9:5239] (rev 01)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV34 [GeForce FX 5500] [10de:0326] (rev a1)
02:07.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10)
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04f3:0210 Elan Microelectronics Corp. AM-400 Hama Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
H/W path Device Class Description
=======
/0 bus K8U-X
/0/0 memory 64KiB BIOS
/0/4 processor AMD Sempron(tm) Processor 2800+
/0/4/5 memory 128KiB L1 cache
/0/4/6 memory 256KiB L2 cache
/0/32 memory 1536MiB System Memory
/0/32/0 memory 1GiB DIMM SDRAM Synchronous
/0/32/1 memory 512MiB DIMM SDRAM Synchronous
/0/100 bridge M1689 K8 Northbridge [Super K8 Si
/0/100/1 bridge AGP8X Controller
/0/100/1/0 display NV34 [GeForce FX 5500]
/0/100/2 bridge M5249 HTT to PCI Bridge
/0/100/2/7 multimedia CM8738
/0/100/3 bridge M1563 HyperTransport South Bridge
/0/100/3.1 bridge M7101 Power Management Controller
/0/100/4 multimedia M5455 PCI AC-Link Controller Audi
/0/100/d eth0 network ULi 1689,1573 integrated ethernet
/0/100/e scsi2 storage M5229 IDE
/0/100/e/0.1.0 /dev/cdrom1 disk DVD-ROM SH-D162C
/0/100/e/0.0.0 /dev/cdrom disk CD/DVDW SH-W162C
/0/100/e.1 scsi0 storage ULi 5289 SATA
/0/100/e.1/0.0.0 /dev/sda disk 320GB SAMSUNG HD322HJ
/0/100/e.1/0.0.0/1 /dev/sda1 volume 295GiB EXT4 volume
/0/100/e.1/0.0.0/2 /dev/sda2 volume 2194MiB Extended partition
/0/100/
/0/100/f bus USB 1.1 Controller
/0/100/f.1 bus USB 1.1 Controller
/0/100/f.2 bus USB 1.1 Controller
/0/100/f.3 bus USB 2.0 Controller
/0/101 bridge K8 [Athlon64/Opteron] HyperTransp
/0/102 bridge K8 [Athlon64/Opteron] Address Map
/0/103 bridge K8 [Athlon64/Opteron] DRAM Contro
/0/104 bridge K8 [Athlon64/Opteron] Miscellaneo
Linux thegreens 2.6.32-
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.020775] SMP alternatives: switching to UP code
[ 0.097108] ACPI: No dock devices found.
[ 0.110025] usbcore: registered new interface driver usbfs
[ 0.110040] usbcore: registered new interface driver hub
[ 0.110069] usbcore: registered new device driver usb
[ 0.110477] Switching to clocksource tsc
[ 0.116796] pnp: PnP ACPI: found 13 devices
[ 0.777847] usb usb1: configuration #1 chosen from 1 choice
[ 0.777886] hub 1-0:1.0: USB hub found
[ 0.835932] usb usb2: configuration #1 chosen from 1 choice
[ 0.835973] hub 2-0:1.0: USB hub found
[ 0.919377] usb usb3: configuration #1 chosen from 1 choice
[ 0.919418] hub 3-0:1.0: USB hub found
[ 1.007577] usb usb4: configuration #1 chosen from 1 choice
[ 1.007617] hub 4-0:1.0: USB hub found
[ 1.014653] device-mapper: multipath: version 1.1.0 loaded
[ 1.014657] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.019920] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.311091] isapnp: No Plug & Play device found
[ 1.321570] usb 3-1: new low speed USB device using ohci_hcd and address 2
[ 1.541355] usb 3-1: configuration #1 chosen from 1 choice
[ 2.663231] usbcore: registered new interface driver hiddev
[ 2.677575] input: PS/2+USB Mouse as /devices/
[ 2.677707] generic-usb 0003:04F3:
[ 2.677744] usbcore: registered new interface driver usbhid
[ 2.677748] usbhid: v2.6:USB HID core driver
[ 10.014726] lp: driver loaded but no devices found
[ 10.208160] ali1563_smbus 0000:00:03.0: Found ALi1563 SMBus at 0x0400
[ 10.607635] eth0: ULi M5263 at pci0000:00:0d.0, 00:15:f2:47:63:5b, irq 17.
[ 11.056624] [drm] nouveau 0000:01:00.0: BMP BIOS found
[ 11.056635] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
[ 11.364405] ADDRCONF(
[ 11.990711] Console: switching to colour frame buffer device 180x56
[ 14.364353] uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
[ 14.379101] ADDRCONF(
[ 25.008008] eth0: no IPv6 routers present
lo no wireless extensions.
eth0 no wireless extensions.
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
16: PCI 0d.0: 0200 Ethernet controller
[Created at pci.318]
UDI: /org/freedeskto
Unique ID: rBUF.QYZJmC15oMA
SysFS ID: /devices/
SysFS BusID: 0000:00:0d.0
Hardware Class: network
Model: "ALi ULi 1689,1573 integrated ethernet."
Vendor: pci 0x10b9 "ALi Corporation"
Device: pci 0x5263 "ULi 1689,1573 integrated ethernet."
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x816a
Revision: 0x40
Driver: "uli526x"
Driver Modules: "uli526x"
Device File: eth0
I/O Ports: 0xc400-0xc4ff (rw)
Memory Range: 0xfaefec00-
IRQ: 17 (4292 events)
HW Address: 00:15:f2:47:63:5b
Link detected: yes
Module Alias: "pci:v000010B9d
Driver Info #0:
Driver Status: uli526x is active
Driver Activation Cmd: "modprobe uli526x"
Config Status: cfg=new, avail=yes, need=no, active=unknown
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
Module Size Used by
joydev 8740 0
binfmt_misc 6587 1
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
vga16fb 11385 0
vgastate 8961 1 vga16fb
snd_intel8x0 25652 0
snd_ac97_codec 100646 1 snd_intel8x0
ac97_bus 1002 1 snd_ac97_codec
snd_pcm_oss 35308 0
snd_cmipci 30469 2
snd_mixer_oss 13746 1 snd_pcm_oss
gameport 9089 1 snd_cmipci
snd_opl3_lib 8998 1 snd_cmipci
snd_hwdep 5412 1 snd_opl3_lib
snd_mpu401_uart 5649 1 snd_cmipci
snd_pcm 70918 4 snd_intel8x0,
snd_seq_dummy 1338 0
snd_seq_oss 26722 0
snd_seq_midi 4557 0
snd_rawmidi 19056 2 snd_mpu401_
snd_seq_midi_event 6003 2 snd_seq_
snd_seq 47263 6 snd_seq_
nouveau 467624 2
ttm 50071 1 nouveau
snd_timer 19098 3 snd_opl3_
snd_seq_device 5700 6 snd_opl3_
drm_kms_helper 29329 1 nouveau
amd64_agp 7229 1
ppdev 5259 0
drm 163034 4 nouveau,
snd 54180 18 snd_intel8x0,
parport_pc 26250 1
ali_agp 3717 0
i2c_algo_bit 5028 1 nouveau
soundcore 6620 1 snd
k8temp 3152 0
i2c_ali1563 5470 0
i2c_ali15x3 5114 0
i2c_ali1535 4789 0
snd_page_alloc 7172 2 snd_intel8x0,
uli526x 13638 0
agpgart 31788 4 ttm,amd64_
shpchp 28899 0
lp 7028 0
parport 32635 3 ppdev,parport_pc,lp
usbhid 36206 0
hid 67096 1 usbhid
floppy 53080 0
pata_ali 7932 0
sata_uli 2561 2
thegreens@
Sorry, I don't know the exact make could you please tell me how?
|
Revision history for this message
|
#3 |
Ignore what I just sent you please that was not for my laptop.
I am on my parents computer because I cant get on the internet so I couldn't send you what the output was. Sorry.
|
Revision history for this message
|
#4 |
You should be able to see the model and make on the bottom or back of your laptop. Another way to find out, is to boot into the BIOS and check the model and make there.
Your Terminal output does not list any wireless adapter on your PC.
So I wonder what you mean by "Wireless internet connection problems"
Please explain in detail how you connect your PC to the internet device without using cables....
Are you connecting the PC to a Wimax modem using a LAN/ethernet cable?
Are you using a wireless router? Or a 3G modem?
I recommend entering the BIOS and checking the settings for your wireless adapter in the BIOS. If there are no settings for wireless in the BIOS, then there is probably no wireless adapter installed in your PC...
|
Revision history for this message
|
#5 |
I will now send you what It says now from my laptop after I have connected the wired network adapter
|
Revision history for this message
|
#6 |
After I connected the wired network adapter this is the output in the terminal after I had entered the command:
Get: 19 http://
Get: 20 http://
Get: 21 http://
Get: 22 http://
Get: 23 http://
Get: 24 http://
Get: 25 http://
Get: 26 http://
Get: 27 http://
Get: 28 http://
Get: 29 http://
Get: 30 http://
Get: 31 http://
Get: 32 http://
Get: 33 http://
Get: 34 http://
Fetched 12.5MB in 15s (792kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
The following extra packages will be installed:
libhd16
The following NEW packages will be installed
hwinfo libhd16
0 upgraded, 2 newly installed, 0 to remove and 390 not upgraded.
Need to get 744kB of archives.
After this operation, 2,060kB of additional disk space will be used.
Do you want to continue [Y/n]? Y
Get: 1 http://
Get: 2 http://
Fetched 744kB in 1s (566kB/s)
Selecting previously deselected package libhd16.
(Reading database ... 122714 files and directories currently installed.)
Unpacking libhd16 (from .../libhd16_
Selecting previously deselected package hwinfo.
Unpacking hwinfo (from .../hwinfo_
Processing triggers for man-db ...
Setting up libhd16 (16.0-2) ...
Setting up hwinfo (16.0-2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
*-network
description: Wireless interface
product: Realtek Semiconductor Co., Ltd.
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:0e:00.0
logical name: wlan0
version: 10
serial: 70:1a:04:76:f4:47
width: 32 bits
clock: 33MHz
resources: irq:18 ioport:
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:14:00.0
logical name: eth0
version: 02
serial: 00:26:22:4b:ab:4b
size: 100MB/s
capacity: 100MB/s
width: 64 bits
clock: 33MHz
resources: irq:27 ioport:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Scan completed :
Cell 01 - Address: 00:17:3F:A9:3B:2B
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600]
00:01.0 PCI bridge [0604]: Toshiba America Info Systems Device [1179:9602]
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606]
00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) [1022:9607]
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391]
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398]
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398]
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3a)
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c]
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] HyperTransport Configuration [1022:1300] (rev 40)
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h [Turion X2, Athlon X2, Sempron] Address Map [1022:1301]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] DRAM Controller [1022:1302]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] Miscellaneous Control [1022:1303]
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] Link Control [1022:1304]
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612]
01:05.1 Audio device [0403]: ATI Technologies Inc RS780 Azalia controller [1002:960f]
0e:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. Device [10ec:8172] (rev 10)
14:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04f2:b070 Chicony Electronics Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
H/W path Device Class Description
=======
/0 bus NBWAE
/0/0 memory 109KiB BIOS
/0/4 processor AMD Turion(tm) X2 Dual-Core Mobile RM-7
/0/4/5 memory 128KiB L1 cache
/0/4/6 memory 512KiB L2 cache
/0/d memory 4GiB System Memory
/0/d/0 memory 2GiB DIMM DDR2 Synchronous 800 MHz (1.2
/0/d/1 memory 2GiB DIMM DDR2 Synchronous 800 MHz (1.2
/0/1 processor
/0/1/0 memory 128KiB L1 cache
/0/1/1 memory 512KiB L2 cache
/0/100 bridge RS780 Host Bridge
/0/100/1 bridge Toshiba America Info Systems
/0/100/1/5 display RS780M/RS780MN [Radeon HD 3200 Graphics
/0/100/1/5.1 multimedia RS780 Azalia controller
/0/100/6 bridge RS780 PCI to PCI bridge (PCIE port 2)
/0/100/6/0 wlan0 network Realtek Semiconductor Co., Ltd.
/0/100/7 bridge RS780 PCI to PCI bridge (PCIE port 3)
/0/100/7/0 eth0 network RTL8101E/RTL8102E PCI Express Fast Ethe
/0/100/11 scsi3 storage SB700/SB800 SATA Controller [AHCI mode]
/0/100/11/0 /dev/sda disk 500GB TOSHIBA MK5055GS
/0/100/11/0/1 /dev/sda1 volume 457GiB EXT4 volume
/0/100/11/0/2 /dev/sda2 volume 8486MiB Extended partition
/0/100/11/0/2/5 /dev/sda5 volume 8486MiB Linux swap / Solaris partition
/0/100/11/1 /dev/cdrom disk CDDVDW TS-L633C
/0/100/12 bus SB700/SB800 USB OHCI0 Controller
/0/100/12.1 bus SB700 USB OHCI1 Controller
/0/100/12.2 bus SB700/SB800 USB EHCI Controller
/0/100/13 bus SB700/SB800 USB OHCI0 Controller
/0/100/13.1 bus SB700 USB OHCI1 Controller
/0/100/13.2 bus SB700/SB800 USB EHCI Controller
/0/100/14 bus SBx00 SMBus Controller
/0/100/14.1 storage SB700/SB800 IDE Controller
/0/100/14.2 multimedia SBx00 Azalia (Intel HDA)
/0/100/14.3 bridge SB700/SB800 LPC host controller
/0/100/14.4 bridge SBx00 PCI to PCI Bridge
/0/101 bridge Mobile K10 [Turion X2, Athlon X2, Sempr
/0/102 bridge Family 11h [Turion X2, Athlon X2, Sempr
/0/103 bridge Mobile K10 [Turion X2, Athlon X2, Sempr
/0/104 bridge Mobile K10 [Turion X2, Athlon X2, Sempr
/0/105 bridge Mobile K10 [Turion X2, Athlon X2, Sempr
/1 power TOSHIBA
Linux davidgreen-laptop 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 i686 GNU/Linux
[ 0.000000] found SMP MP-table at [c00f7de0] f7de0
[ 0.200756] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 0.256221] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 0.257110] ACPI: No dock devices found.
[ 0.267912] usbcore: registered new interface driver usbfs
[ 0.267924] usbcore: registered new interface driver hub
[ 0.267952] usbcore: registered new device driver usb
[ 0.270423] Switching to clocksource hpet
[ 0.296149] pnp: PnP ACPI: found 11 devices
[ 0.346423] input: Lid Switch as /devices/
[ 0.346507] ACPI: Lid Switch [LID]
[ 0.376767] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.431283] usb usb1: configuration #1 chosen from 1 choice
[ 0.431314] hub 1-0:1.0: USB hub found
[ 0.431484] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.481715] usb usb2: configuration #1 chosen from 1 choice
[ 0.481738] hub 2-0:1.0: USB hub found
[ 0.541184] usb usb3: configuration #1 chosen from 1 choice
[ 0.541214] hub 3-0:1.0: USB hub found
[ 0.601145] usb usb4: configuration #1 chosen from 1 choice
[ 0.601168] hub 4-0:1.0: USB hub found
[ 0.664118] usb usb5: configuration #1 chosen from 1 choice
[ 0.664142] hub 5-0:1.0: USB hub found
[ 0.724120] usb usb6: configuration #1 chosen from 1 choice
[ 0.724143] hub 6-0:1.0: USB hub found
[ 0.741678] device-mapper: multipath: version 1.1.0 loaded
[ 0.741681] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.743302] powernow-k8: Found 1 AMD Turion(tm) X2 Dual-Core Mobile RM-74 processors (2 cpu cores) (version 2.20.00)
[ 0.761064] isapnp: No Plug & Play device found
[ 0.762121] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.848058] usb 2-4: new high speed USB device using ehci_hcd and address 2
[ 1.020885] usb 2-4: configuration #1 chosen from 1 choice
[ 1.061687] eth0: RTL8102e at 0xf80b2000, 00:26:22:4b:ab:4b, XID 04c00000 IRQ 27
[ 1.552050] ata6: applying SB600 PMP SRST workaround and retrying
[ 1.556054] ata4: applying SB600 PMP SRST workaround and retrying
[ 11.177977] lp: driver loaded but no devices found
[ 11.262060] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 11.452488] rtllib_crypt: registered algorithm 'NULL'
[ 11.452492] rtllib_crypt: registered algorithm 'TKIP'
[ 11.452494] rtllib_crypt: registered algorithm 'CCMP'
[ 11.452496] rtllib_crypt: registered algorithm 'WEP'
[ 11.452546] rtl819xSE 0000:0e:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 11.452553] rtl819xSE 0000:0e:00.0: setting latency timer to 64
[ 11.475930] Adapter(8192SE) is found - DeviceID=8172
[ 11.496929] uvcvideo: Found UVC 1.00 device CNF7051 (04f2:b070)
[ 11.514423] input: CNF7051 as /devices/
[ 11.514490] usbcore: registered new interface driver uvcvideo
[ 11.631380] platform radeon_cp.0: firmware: requesting radeon/
[ 11.636245] platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin
[ 11.642629] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
[ 12.285519] rtl819xSE 0000:0e:00.0: firmware: requesting RTL8192SE/
[ 12.397093] rtl8192_
[ 12.406831] ===>rtllib_
[ 12.408439] ADDRCONF(
[ 12.410043] r8169: eth0: link down
[ 12.410303] ADDRCONF(
[ 12.905741] Console: switching to colour frame buffer device 170x48
[ 19.405050] -------
[ 19.406052] <------
[ 20.584193] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 26.436062] -------
[ 26.437067] <------
[ 39.382276] rtl8192_
[ 46.392021] -------
[ 46.393026] <------
[ 56.581119] rtl8192_
[ 56.844049] rtl8192_
[ 56.844053] rtllib_
[ 63.852058] -------
[ 63.853065] <------
[ 792.672109] ata4: applying SB600 PMP SRST workaround and retrying
[ 795.364772] rtl819xSE 0000:0e:00.0: PCI INT A disabled
[ 796.236052] SMP alternatives: switching to UP code
[ 796.244042] SMP alternatives: switching to SMP code
[ 796.720046] usb usb3: root hub lost power or was reset
[ 796.780044] usb usb4: root hub lost power or was reset
[ 796.780059] usb usb1: root hub lost power or was reset
[ 796.840043] usb usb5: root hub lost power or was reset
[ 796.900056] usb usb6: root hub lost power or was reset
[ 796.900069] usb usb2: root hub lost power or was reset
[ 797.144069] ata4: applying SB600 PMP SRST workaround and retrying
[ 797.144088] ata6: applying SB600 PMP SRST workaround and retrying
[ 797.888171] rtl819xSE 0000:0e:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 798.020072] PM: restore of drv:usb dev:usb1 complete after 129.468 msecs
[ 798.256053] PM: restore of drv:usb dev:usb2 complete after 235.965 msecs
[ 798.372056] usb 2-4: reset high speed USB device using ehci_hcd and address 2
[ 798.553067] PM: restore of drv:usb dev:2-4 complete after 291.909 msecs
[ 798.999077] rtl8192_
[ 799.008825] ===>rtllib_
[ 799.010113] ADDRCONF(
[ 806.005077] -------
[ 806.006112] <------
[ 806.007106] r8169: eth0: link down
[ 806.007951] ADDRCONF(
[ 809.072236] r8169: eth0: link up
[ 813.032087] -------
[ 813.033121] <------
[ 813.034106] ADDRCONF(
[ 820.032101] -------
[ 820.033138] <------
[ 820.196135] rtl8192_
[ 820.196145] rtllib_
[ 823.440064] eth0: no IPv6 routers present
[ 827.204069] -------
[ 827.205102] <------
[ 1139.465071] -------
[ 1139.466109] <------
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 802.11bg ESSID:"SKY27615" Nickname:
Bit Rate=54 Mb/s
Retry:on RTS thr:off Fragment thr:off
Power Management:off
Link Quality=0/100 Signal level=0 dBm Noise level=0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
31: PCI e00.0: 0282 WLAN controller
[Created at pci.318]
UDI: /org/freedeskto
Unique ID: y9sn.rxMLBAixq6B
Parent ID: H0_h.AQdh0Ungjl1
SysFS ID: /devices/
SysFS BusID: 0000:0e:00.0
Hardware Class: network
Model: "Realtek WLAN controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8172
SubVendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
SubDevice: pci 0x8181
Revision: 0x10
Driver: "rtl819xSE"
Driver Modules: "r8192se_pci"
Device File: wlan0
Features: WLAN
I/O Ports: 0xa000-0xafff (rw)
Memory Range: 0xf0200000-
IRQ: 18 (21564 events)
HW Address: 70:1a:04:76:f4:47
Link detected: no
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
WLAN bitrates: 1 2 5.5 11 6 9 12 18 24 36 48 54
WLAN encryption modes: TKIP CCMP
WLAN authentication modes: open wpa-psk wpa-eap
Module Alias: "pci:v000010ECd
Driver Info #0:
Driver Status: r8192se_pci is active
Driver Activation Cmd: "modprobe r8192se_pci"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #10 (PCI bridge)
32: PCI 1400.0: 0200 Ethernet controller
[Created at pci.318]
UDI: /org/freedeskto
Unique ID: rBUF.C2oIbjc4rfC
Parent ID: M71A.hqZRV2vNF82
SysFS ID: /devices/
SysFS BusID: 0000:14:00.0
Hardware Class: network
Model: "Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8136 "RTL8101E/RTL8102E PCI Express Fast Ethernet controller"
SubVendor: pci 0x1179 "Toshiba America Info Systems"
SubDevice: pci 0xff00
Revision: 0x02
Driver: "r8169"
Driver Modules: "r8169"
Device File: eth0
I/O Ports: 0xb000-0xbfff (rw)
Memory Range: 0xf0410000-
Memory Range: 0xf0400000-
Memory Range: 0xf0420000-
IRQ: 27 (17689 events)
HW Address: 00:26:22:4b:ab:4b
Link detected: yes
Module Alias: "pci:v000010ECd
Driver Info #0:
Driver Status: r8169 is active
Driver Activation Cmd: "modprobe r8169"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #11 (PCI bridge)
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
Module Size Used by
ipt_MASQUERADE 1407 1
xt_state 1098 1
ipt_REJECT 1928 2
xt_tcpudp 2011 4
iptable_filter 2271 1
nf_nat_h323 5077 0
nf_conntrack_h323 46926 1 nf_nat_h323
nf_nat_pptp 1920 0
nf_conntrack_pptp 4413 1 nf_nat_pptp
nf_conntrack_
nf_nat_proto_gre 1259 1 nf_nat_pptp
nf_nat_tftp 716 0
nf_conntrack_tftp 2893 1 nf_nat_tftp
nf_nat_sip 5108 0
nf_conntrack_sip 15389 1 nf_nat_sip
nf_nat_irc 1124 0
nf_conntrack_irc 3332 1 nf_nat_irc
nf_nat_ftp 1836 0
nf_conntrack_ftp 5381 1 nf_nat_ftp
iptable_nat 4414 1
nf_nat 15735 9 ipt_MASQUERADE,
nf_conntrack_ipv4 10672 4 iptable_nat,nf_nat
nf_conntrack 61583 18 ipt_MASQUERADE,
nf_defrag_ipv4 1073 1 nf_conntrack_ipv4
ip_tables 9991 2 iptable_
x_tables 14299 6 ipt_MASQUERADE,
arc4 1153 2
binfmt_misc 6587 1
ppdev 5259 0
joydev 8708 0
snd_hda_
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
vga16fb 11385 0
vgastate 8961 1 vga16fb
snd_hda_
snd_seq_dummy 1338 0
snd_seq_oss 26726 0
snd_seq_midi 4557 0
snd_rawmidi 19056 1 snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_
snd_seq 47263 6 snd_seq_
snd_hda_intel 21877 2
snd_hda_codec 74201 3 snd_hda_
snd_hwdep 5412 1 snd_hda_codec
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
radeon 674135 3
snd_pcm 70662 3 snd_hda_
ttm 49943 1 radeon
drm_kms_helper 29297 1 radeon
snd_seq_device 5700 5 snd_seq_
snd_timer 19098 2 snd_seq,snd_pcm
drm 162471 5 radeon,
agpgart 31724 2 ttm,drm
i2c_algo_bit 5028 1 radeon
snd 54148 16 snd_hda_
uvcvideo 56990 0
videodev 34361 1 uvcvideo
psmouse 63245 0
soundcore 6620 1 snd
serio_raw 3978 0
shpchp 28820 0
v4l1_compat 13251 2 uvcvideo,videodev
snd_page_alloc 7076 2 snd_hda_
r8192se_pci 446468 0
i2c_piix4 8335 0
video 17375 0
output 1871 1 video
lp 7028 0
parport 32635 2 ppdev,lp
r8169 33884 0
mii 4381 1 r8169
pata_atiixp 3148 0
ahci 32008 2
davidgreen@
Sorry again for the mess-up before
|
Revision history for this message
|
#7 |
I assume that the unique identifier for YOUR wireless router is ESSID:"SKY27615"
Your wireless adapter is already working correctly, because the Terminal output shows that your wireless adapter has found 1 wireless access point called "McGregor"
So either your laptop is too far away from YOUR wireless router SKY27615, or you need to change the wireless settings on the Sky router to make it work/visible....
I suggest connecting your laptop to the router using a LAN cable.
Then run the following Terminal command to upgrade the software packages on your laptop:
sudo apt-get update && sudo apt-get dist-upgrade
After the installation of packages is complete, reboot your laptop.
Then access the wireless configuration page using a webbrowser (chromium or firefox) and go to http://
Here is more info on accessing the router:
http://
In the router settings, I suggest enabling SSID broadcasting and temporarily disabling encryption on the router.
Then retest wireless using NetworkManager.
|
Revision history for this message
|
#8 |
Thank you. I have installed the package and my internet now works without the LAN cable but do I still need to access the wireless configuration page?
|
Revision history for this message
|
#9 |
If so, what username and password do I use?
|
Revision history for this message
|
#10 |
If wireless is working now, then there is no need to access the wireless configuration page.
Please set the thread status to "solved", if the issue is still solved.
|
Revision history for this message
|
#11 |
Thanks Mark Rijckenberg, that solved my question.
