rtl819xU:FirmwareRequest92S(): failed with TCR-Status: a -> rtl819xU:ERR!!! _rtl8192_up(): initialization is failed! -> Bus 005 Device 002: ID 050d:815f Belkin Components F5D8053 N Wireless USB Adapter v6000 [Realtek RTL8192SU] -> Belkin f5d8053 wireless usb adapter not working on Ubuntu 10.10 using the r8192s_usb driver due to missing firmware
I have a Belkin f5d8053 N wireless USB adapter that will not work.
I typed in lsusb into terminal and it shows that it IS bieng recognized it is just not working.
I have tried using WineHQ to run the .exe file from the installation disk but it ultimately did not work. It would install the files necessary for it to work and then prompt me to insert the device. when it was it still did not register it was there.
I have also tried using ndiswrapper ndisgtk and such with the .inf file and it again did not work.
I have also tried the rt2870 method wihich also did not work due to some errors along the way. it would not recognize that I had extracted that file and would not extract it from terminal.
i've also installed the driver from the belkin website but that doesn't work either.
I've tried wrestling with the make file but they would not work.
i've installed the apt-get install builld header thingy. I don't know what to do I'm losing my mind the light is supossed to blink blue and it's not :(
I do not know what further information might be needed ..but please help.
Question information
- Language:
- English Edit question
- Status:
- Open
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Related bugs
Related FAQ:
None Link to a FAQ
|
Revision history for this message
|
#1 |
wait i did not type full name its a fd58053v6 n wireless internet adapter
|
Revision history for this message
|
#2 |
The EXE is a Windows file, Ubuntu is not Windows, it is a distribution of Linux.
Can you give the output of:
lsusb; sudo lshw -C network
We need to know the CHIP in the device which is currently not known. Belkin do not make chips, they buy them from Atheros and Broadcom and make adapters so telling us the make and model isn't as useful as you think
|
Revision history for this message
|
#3 |
Hi,
Please first connect your wired network adapter to the wireless router using an ethernet cable (also known as a LAN cable).
In order to gather essential troubleshooting information about your wireless card, please follow this procedure:
Step 1: Open Terminal from "Applications-
Step 2: Please copy-paste the following command from the https:/
Tip: If you have a wheel mouse or 3 button mouse you do not need to type commands into the Terminal. Highlight the command written on the page. Move your cursor anywhere in the Terminal and press the wheel or middle button. Automatic Copy and paste! No spelling mistakes! No Typos! No other errors!
sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/
Step 3: Please post results (copy/paste terminal output) on this thread. The troubleshooters here need to see the full Terminal output from running the above command.
Regards,
Mark
|
Revision history for this message
|
#4 |
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 05e3:0710 Genesys Logic, Inc. USB 2.0 33-in-1 Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
sudo: the argument to -C must be at least 3
usage: sudo -h | -K | -k | -L | -V
usage: sudo -v [-AknS] [-p prompt]
usage: sudo -l[l] [-AknS] [-g groupname|#gid] [-p prompt] [-U username] [-u
usage: sudo [-AbEHknPS] [-C fd] [-g groupname|#gid] [-p prompt] [-u
usage: sudo -e [-AknS] [-C fd] [-g groupname|#gid] [-p prompt] [-u
|
Revision history for this message
|
#5 |
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 050d:815f Belkin Components F5D8053 N Wireless USB Adapter v6000 [Realtek RTL8192SU]
Bus 001 Device 002: ID 05e3:0710 Genesys Logic, Inc. USB 2.0 33-in-1 Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
sudo: the argument to -C must be at least 3
usage: sudo -h | -K | -k | -L | -V
usage: sudo -v [-AknS] [-p prompt]
usage: sudo -l[l] [-AknS] [-g groupname|#gid] [-p prompt] [-U username] [-u
usage: sudo [-AbEHknPS] [-C fd] [-g groupname|#gid] [-p prompt] [-u
usage: sudo -e [-AknS] [-C fd] [-g groupname|#gid] [-p prompt] [-u
mica@Steve-
oops forgot to plug the adapter in, in the one above it
|
Revision history for this message
|
#6 |
here is the full terminal output of the command given above :
Get:1 http://
Ign http://
Ign http://
Hit http://
Ign http://
Get:2 http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Get:3 http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Get:4 http://
Ign http://
Ign http://
Ign http://
Get:5 http://
Ign http://
Ign http://
Ign http://
Hit http://
Get:6 http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Get:7 http://
Get:8 http://
Hit http://
Get:9 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:10 http://
Get:11 http://
Get:12 http://
Get:13 http://
Get:14 http://
Hit http://
Get:15 http://
Get:16 http://
Get:17 http://
Get:18 http://
Get:19 http://
Get:20 http://
Get:21 http://
Get:22 http://
Get:23 http://
Get:24 http://
Get:25 http://
Fetched 720kB in 4s (175kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
The following packages were automatically installed and are no longer required:
libdpkg-perl fakeroot libalgorithm-
dpkg-dev patch libalgorithm-
Use 'apt-get autoremove' to remove them.
The following NEW packages will be installed:
hwinfo libhd16
0 upgraded, 2 newly installed, 0 to remove and 262 not upgraded.
Need to get 749kB of archives.
After this operation, 2,114kB of additional disk space will be used.
Get:1 http://
Get:2 http://
Fetched 749kB in 3s (189kB/s)
Selecting previously deselected package libhd16.
(Reading database ... 139575 files and directories currently installed.)
Unpacking libhd16 (from .../libhd16_
Selecting previously deselected package hwinfo.
Unpacking hwinfo (from .../hwinfo_
Processing triggers for man-db ...
Setting up libhd16 (16.0-2) ...
Setting up hwinfo (16.0-2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
PCI (sysfs)
*-network
description: Ethernet interface
product: VT6102 [Rhine-II]
vendor: VIA Technologies, Inc.
physical id: 12
bus info: pci@0000:00:12.0
logical name: eth0
version: 78
serial: 00:15:f2:61:74:21
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
resources: irq:23 ioport:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:0204]
00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:1204]
00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:2204]
00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:3204]
00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:4204]
00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:7204]
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] [1106:b188]
00:07.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 80)
00:0c.0 Communication controller [0780]: Conexant Systems, Inc. SoftV92 SpeakerPhone SoftRing Modem with SmartSP [14f1:2f30] (rev 01)
00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80)
00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86)
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 80)
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 78)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AS [Radeon 9550] [1002:4153]
01:00.1 Display controller [0380]: ATI Technologies Inc RV350 AS [Radeon 9550] (Secondary) [1002:4173]
Bus 005 Device 002: ID 050d:815f Belkin Components F5D8053 N Wireless USB Adapter v6000 [Realtek RTL8192SU]
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 1307:0165 Transcend Information, Inc. 2GB/4GB Flash Drive
Bus 001 Device 002: ID 05e3:0710 Genesys Logic, Inc. USB 2.0 33-in-1 Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
H/W path Device Class Description
=======
/0 bus K8V-MX
/0/0 memory 64KiB BIOS
/0/4 processor AMD Sempron(tm) Processor 3100+
/0/4/5 memory 64KiB L1 cache
/0/4/6 memory 256KiB L2 cache
/0/2f memory 1GiB System Memory
/0/2f/0 memory 512MiB DIMM DDR Synchronous 400 MHz
/0/2f/1 memory 512MiB DIMM DDR Synchronous 400 MHz
/0/100 bridge K8M800 Host Bridge
/0/100/1 bridge VT8237 PCI bridge [K8T800/K8T890 So
/0/100/1/0 display RV350 AS [Radeon 9550]
/0/100/1/0.1 display RV350 AS [Radeon 9550] (Secondary)
/0/100/7 bus VT6306/7/8 [Fire II(M)] IEEE 1394 O
/0/100/c communication SoftV92 SpeakerPhone SoftRing Modem
/0/100/f storage VIA VT6420 SATA RAID Controller
/0/100/f.1 scsi2 storage VT82C586A/
/0/100/f.1/0 /dev/sda disk 160GB ST3160812A
/0/100/f.1/0/1 /dev/sda1 volume 146GiB EXT4 volume
/0/100/f.1/0/2 /dev/sda2 volume 2923MiB Extended partition
/0/100/f.1/0/2/5 /dev/sda5 volume 2923MiB Linux swap / Solaris partit
/0/100/f.1/1 /dev/cdrom disk DVD DC DQ60
/0/100/f.1/1/0 /dev/cdrom disk
/0/100/10 bus VT82xxxxx UHCI USB 1.1 Controller
/0/100/10.1 bus VT82xxxxx UHCI USB 1.1 Controller
/0/100/10.2 bus VT82xxxxx UHCI USB 1.1 Controller
/0/100/10.3 bus VT82xxxxx UHCI USB 1.1 Controller
/0/100/10.4 bus USB 2.0
/0/100/11 bridge VT8237 ISA bridge [KT600/K8T800/K8T
/0/100/11.5 multimedia VT8233/A/8235/8237 AC97 Audio Contr
/0/100/11.6 communication AC'97 Modem Controller
/0/100/12 eth0 network VT6102 [Rhine-II]
/0/101 bridge K8M800 Host Bridge
/0/102 bridge K8M800 Host Bridge
/0/103 bridge K8M800 Host Bridge
/0/104 bridge K8M800 Host Bridge
/0/105 bridge K8M800 Host Bridge
/0/106 bridge K8 [Athlon64/Opteron] HyperTranspor
/0/107 bridge K8 [Athlon64/Opteron] Address Map
/0/108 bridge K8 [Athlon64/Opteron] DRAM Controll
/0/109 bridge K8 [Athlon64/Opteron] Miscellaneous
/0/1 scsi4 storage
/0/1/0.0.0 /dev/sdb disk CF USB2.0 Reade
/0/1/0.0.0/0 /dev/sdb disk
/0/1/0.0.1 /dev/sdc disk SM USB2.0 Reade
/0/1/0.0.1/0 /dev/sdc disk
/0/1/0.0.2 /dev/sdd disk SD USB2.0 Reade
/0/1/0.0.2/0 /dev/sdd disk
/0/1/0.0.3 /dev/sde disk MS USB2.0 Reade
/0/1/0.0.3/0 /dev/sde disk
/0/2 scsi5 storage
/0/2/0.0.0 /dev/sdf volume 15EiB Windows FAT volume
Linux Steve-P4NK4K3S 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 x86_64 GNU/Linux
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] No NUMA configuration found
[ 0.012012] SMP alternatives: switching to UP code
[ 0.168246] ACPI: No dock devices found.
[ 0.184051] HEST: Table is not found!
[ 0.184476] usbcore: registered new interface driver usbfs
[ 0.184489] usbcore: registered new interface driver hub
[ 0.184517] usbcore: registered new device driver usb
[ 0.184997] Switching to clocksource tsc
[ 0.196284] pnp: PnP ACPI: found 14 devices
[ 0.278917] ERST: Table is not found!
[ 0.315243] hub 1-0:1.0: USB hub found
[ 0.325679] hub 2-0:1.0: USB hub found
[ 0.326079] hub 3-0:1.0: USB hub found
[ 0.326432] hub 4-0:1.0: USB hub found
[ 0.326798] hub 5-0:1.0: USB hub found
[ 0.335766] device-mapper: multipath: version 1.1.1 loaded
[ 0.335772] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.344886] powernow-k8: Found 1 AMD Sempron(tm) Processor 3100+ (1 cpu cores) (version 2.20.00)
[ 0.345618] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.635005] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 0.966372] eth0: VIA Rhine II at 0xfb800000, 00:15:f2:61:74:21, IRQ 23.
[ 0.967082] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 0.978970] scsi4 : usb-storage 1-5:1.0
[ 0.979160] usbcore: registered new interface driver usb-storage
[ 14.246354] lp: driver loaded but no devices found
[ 15.310089] usb 1-8: new high speed USB device using ehci_hcd and address 3
[ 15.482188] scsi5 : usb-storage 1-8:1.0
[ 15.944889] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 16.298233] Console: switching to colour frame buffer device 160x64
[ 17.710064] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 17.857971] usb 5-1: not running at top speed; connect to a high speed hub
[ 17.913449] ndiswrapper version 1.56 loaded (smp=yes, preempt=no)
[ 17.918318] usbcore: registered new interface driver ndiswrapper
[ 26.250025] eth0: no IPv6 routers present
[ 80.010198] Switching to clocksource acpi_pm
lo no wireless extensions.
eth0 no wireless extensions.
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
options iwlagn 11n_disable=1
alias usb:v050Dp815Fd
alias usb:v0BDAp8171d
alias usb:v0BDAp8172d
alias usb:v0BDAp8173d
alias usb:v0BDAp8174d
29: PCI 12.0: 0200 Ethernet controller
[Created at pci.318]
UDI: /org/freedeskto
Unique ID: rBUF.o6usjnPKuTC
SysFS ID: /devices/
SysFS BusID: 0000:00:12.0
Hardware Class: network
Model: "VIA VT6102 [Rhine-II]"
Vendor: pci 0x1106 "VIA Technologies, Inc."
Device: pci 0x3065 "VT6102 [Rhine-II]"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x80ed "A7V600-X Motherboard"
Revision: 0x78
Driver: "via-rhine"
Driver Modules: "via_rhine"
Device File: eth0
I/O Ports: 0x9400-0x94ff (rw)
Memory Range: 0xfb800000-
IRQ: 23 (1834 events)
HW Address: 00:15:f2:61:74:21
Link detected: yes
Module Alias: "pci:v00001106d
Driver Info #0:
Driver Status: via-rhine is active
Driver Activation Cmd: "modprobe via-rhine"
Config Status: cfg=new, avail=yes, need=no, active=unknown
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
Module Size Used by
joydev 11363 0
nls_iso8859_1 4657 1
nls_cp437 6375 1
vfat 10954 1
fat 56244 1 vfat
nls_utf8 1453 1
isofs 34218 1
ndiswrapper 245044 0
binfmt_misc 7984 1
snd_via82xx 24092 2
gameport 11224 1 snd_via82xx
snd_via82xx_modem 10430 0
radeon 906714 3
snd_mpu401_uart 6849 1 snd_via82xx
snd_ac97_codec 125227 2 snd_via82xx,
ac97_bus 1474 1 snd_ac97_codec
snd_pcm 89104 3 snd_via82xx,
snd_seq_midi 5932 0
snd_rawmidi 22207 2 snd_mpu401_
ttm 68212 1 radeon
drm_kms_helper 32836 1 radeon
snd_seq_midi_event 7291 1 snd_seq_midi
snd_seq 57512 2 snd_seq_
ppdev 6804 0
snd_timer 23850 2 snd_pcm,snd_seq
snd_seq_device 6912 3 snd_seq_
drm 206161 5 radeon,
psmouse 62080 0
i2c_algo_bit 6208 1 radeon
serio_raw 4910 0
parport_pc 30086 1
snd 64117 13 snd_via82xx,
edac_core 46822 0
edac_mce_amd 9387 0
k8temp 4064 0
soundcore 1240 1 snd
i2c_viapro 6817 0
snd_page_alloc 8588 3 snd_via82xx,
shpchp 34910 0
lp 10201 0
parport 37032 3 ppdev,parport_pc,lp
usb_storage 50372 1
firewire_ohci 24679 0
floppy 65299 0
pata_via 9248 3
via_rhine 22488 0
mii 5261 1 via_rhine
sata_via 9840 0
firewire_core 54327 1 firewire_ohci
crc_itu_t 1739 1 firewire_core
|
Revision history for this message
|
#7 |
First you will need to blacklist the ndiswrapper kernel module, as you do not need it.
Please try the following procedure to try to rectify this situation:
Step 1) Open Terminal from "Applications-
Step 2) Please copy-paste the following 3 commands into the Linux Terminal. Press <enter> after each command.
sudo apt-get update
sudo apt-get remove ndiswrapper-common ndisgtk ndiswrapper-
echo -e "blacklist ndiswrapper" | sudo tee -a /etc/modprobe.
=======
After blacklisting ndiswrapper, please follow the procedure from chili555 at the following location:
http://
It is based on the following procedure:
https:/
|
Revision history for this message
|
#8 |
It's still not working but here are the outputs I have gotten from following your commands and the ones from chili555.
mica@Steve-
Hit http://
Ign http://
Hit http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Hit http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Reading package lists... Done
mica@Steve-
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package ndisgtk is not installed, so not removed
Package ndiswrapper-common is not installed, so not removed
Package ndiswrapper-
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies:
ia32-libs : Depends: lib32ncursesw5 but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
mica@Steve-
blacklist ndiswrapper
mica@Steve-
mkdir: cannot create directory `/lib/firmware/
mica@Steve-
--2011-02-20 17:28:54-- http://
Resolving launchpadlibrar
Connecting to launchpadlibrar
HTTP request sent, awaiting response... 200 OK
Length: 31817 (31K) [application/
Saving to: `rtl8192sfw.bin.gz'
100%[==
2011-02-20 17:28:55 (82.5 KB/s) - `rtl8192sfw.bin.gz' saved [31817/31817]
mica@Steve-
mica@Steve-
|
Revision history for this message
|
#9 |
did i do anything wrong? should
I switch to a previous version of ubuntu to see if it works with it? Is there anything else I can do?
Can you help with this problem?
Provide an answer of your own, or ask Mica for more information if necessary.
