broadcom 4313 card doesn't work with install on hp 210-1142cl
installed 10-10 netbook on hp 210-1142cl but the wireless connection doesn't work which is a broadcom 4313 card . Unable to figure out how to update driver or re stall it.
Question information
- Language:
- English Edit question
- Status:
- Solved
- Assignee:
- No assignee Edit question
- Solved by:
- marcus aurelius
- Solved:
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
Hi,
Please first connect your network card to the wireless router using an ethernet cable (also known as a LAN cable).
In order to gather essential troubleshooting information about your wireless card, please follow this procedure:
Step 1: Open Terminal from "Applications-
Step 2: Please copy-paste the following command from the https:/
Tip: If you have a wheel mouse or 3 button mouse you do not need to type commands into the Terminal. Highlight the command written on the page. Move your cursor anywhere in the Terminal and press the wheel or middle button. Automatic Copy and paste! No spelling mistakes! No Typos! No other errors!
sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/
Step 3: Please post results (copy/paste terminal output) on this thread. The troubleshooters here need to see the full Terminal output from running the above command.
Regards,
Mark
|
Revision history for this message
|
#2 |
|
Revision history for this message
|
#3 |
esherry@ubuntu:~$ sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/
[sudo] password for esherry:
Hit http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
hwinfo is already the newest version.
The following packages were automatically installed and are no longer required:
linux-
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 36 not upgraded.
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: eth0
version: 02
serial: c8:0a:a9:be:43:a5
size: 100MB/s
capacity: 100MB/s
width: 64 bits
clock: 33MHz
resources: irq:42 ioport:
*-network UNCLAIMED
description: Network controller
product: BCM4313 802.11b/g LP-PHY
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:02:00.0
version: 01
width: 64 bits
clock: 33MHz
resources: memory:
0: hp-wwan: Wireless WAN
Soft blocked: no
Hard blocked: no
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010]
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011]
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012]
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g LP-PHY [14e4:4727] (rev 01)
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0d3d:0001 Tangtop Technology Co., Ltd HID Keyboard
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 5986:0182 Acer, Inc
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
H/W path Device Class Description
=======
/0 bus 3660
/0/0 memory 1MiB BIOS
/0/a memory 2GiB System Memory
/0/a/0 memory 2GiB SODIMM Synchronous 667 MHz (1.5 ns)
/0/e processor Intel(R) Atom(TM) CPU N455 @ 1.66GHz
/0/e/f memory 512KiB L2 cache
/0/e/10 memory 32KiB L1 cache
/0/e/1.1 processor Logical CPU
/0/e/1.2 processor Logical CPU
/0/100 bridge N10 Family DMI Bridge
/0/100/2 display N10 Family Integrated Graphics Controller
/0/100/2.1 display N10 Family Integrated Graphics Controller
/0/100/1b multimedia N10/ICH 7 Family High Definition Audio Controller
/0/100/1c bridge N10/ICH 7 Family PCI Express Port 1
/0/100/1c/0 eth0 network RTL8101E/RTL8102E PCI Express Fast Ethernet controller
/0/100/1c.1 bridge N10/ICH 7 Family PCI Express Port 2
/0/100/1c.1/0 network BCM4313 802.11b/g LP-PHY
/0/100/1d bus N10/ICH 7 Family USB UHCI Controller #1
/0/100/1d.1 bus N10/ICH 7 Family USB UHCI Controller #2
/0/100/1d.2 bus N10/ICH 7 Family USB UHCI Controller #3
/0/100/1d.3 bus N10/ICH 7 Family USB UHCI Controller #4
/0/100/1d.7 bus N10/ICH 7 Family USB2 EHCI Controller
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1f bridge NM10 Family LPC Controller
/0/100/1f.2 scsi0 storage N10/ICH7 Family SATA AHCI Controller
/0/100/1f.2/0.0.0 /dev/sda disk 250GB ST9250410AS
/0/100/1f.2/0.0.0/1 /dev/sda1 volume 199MiB Windows NTFS volume
/0/100/1f.2/0.0.0/2 /dev/sda2 volume 218GiB Windows NTFS volume
/0/100/1f.2/0.0.0/3 /dev/sda3 volume 14GiB Windows NTFS volume
/0/100/1f.2/0.0.0/4 /dev/sda4 volume 103MiB Windows FAT volume
/0/100/1f.3 bus N10/ICH 7 Family SMBus Controller
/1 power AN06066
Linux ubuntu 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010 i686 GNU/Linux
[ 0.235049] ACPI: No dock devices found.
[ 0.272468] HEST: Table is not found!
[ 0.273791] usbcore: registered new interface driver usbfs
[ 0.273843] usbcore: registered new interface driver hub
[ 0.273939] usbcore: registered new device driver usb
[ 0.280294] Switching to clocksource tsc
[ 0.314124] pnp: PnP ACPI: found 9 devices
[ 0.408232] Switching to clocksource hpet
[ 0.409289] input: Lid Switch as /devices/
[ 0.409753] ACPI: Lid Switch [LID0]
[ 0.429497] ERST: Table is not found!
[ 0.440074] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.505452] hub 1-0:1.0: USB hub found
[ 0.506340] hub 2-0:1.0: USB hub found
[ 0.507039] hub 3-0:1.0: USB hub found
[ 0.507747] hub 4-0:1.0: USB hub found
[ 0.508480] hub 5-0:1.0: USB hub found
[ 0.597120] device-mapper: multipath: version 1.1.1 loaded
[ 0.597130] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.626929] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.802876] isapnp: No Plug & Play device found
[ 0.816567] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 1.238013] r8169 0000:01:00.0: eth0: RTL8102e at 0xf802c000, c8:0a:a9:be:43:a5, XID 04e00000 IRQ 42
[ 11.311702] lp: driver loaded but no devices found
[ 12.073481] uvcvideo: Found UVC 1.00 device HP Webcam-50 (5986:0182)
[ 12.117106] input: HP Webcam-50 as /devices/
[ 12.117437] usbcore: registered new interface driver uvcvideo
[ 13.746480] Console: switching to colour frame buffer device 128x37
[ 13.888964] input: HDA Intel Mic at Ext Front Jack as /devices/
[ 13.889289] input: HDA Intel HP Out at Ext Front Jack as /devices/
[ 16.481449] r8169 0000:01:00.0: eth0: link down
[ 16.482109] ADDRCONF(
[ 108.604117] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 108.878082] usbcore: registered new interface driver hiddev
[ 108.893434] input: USBPS2 as /devices/
[ 108.893788] generic-usb 0003:0D3D:
[ 108.921657] input: USBPS2 as /devices/
[ 108.922285] generic-usb 0003:0D3D:
[ 108.922391] usbcore: registered new interface driver usbhid
[ 108.922404] usbhid: USB HID core driver
[ 216.327263] r8169 0000:01:00.0: eth0: link up
[ 216.327906] ADDRCONF(
[ 227.256126] eth0: no IPv6 routers present
lo no wireless extensions.
eth0 no wireless extensions.
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
options iwlagn 11n_disable=1
> hal.1: read hal dataprocess 2079: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
23: PCI 100.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.rEkSMo6jgd7
Parent ID: z8Q3.toiunV5DoYF
SysFS ID: /devices/
SysFS BusID: 0000:01:00.0
Hardware Class: network
Model: "Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8136 "RTL8101E/RTL8102E PCI Express Fast Ethernet controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3660
Revision: 0x02
Driver: "r8169"
Driver Modules: "r8169"
Device File: eth0
I/O Ports: 0x5000-0x5fff (rw)
Memory Range: 0x90010000-
Memory Range: 0x90000000-
Memory Range: 0x90020000-
IRQ: 42 (9213 events)
HW Address: c8:0a:a9:be:43:a5
Link detected: yes
Module Alias: "pci:v000010ECd
Driver Info #0:
Driver Status: r8169 is active
Driver Activation Cmd: "modprobe r8169"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #12 (PCI bridge)
24: PCI 200.0: 0280 Network controller
[Created at pci.318]
Unique ID: B35A.1miIYSXbCR6
Parent ID: qTvu.vdbOleKdrJ0
SysFS ID: /devices/
SysFS BusID: 0000:02:00.0
Hardware Class: network
Model: "Broadcom Network controller"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4727
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x145c
Revision: 0x01
Memory Range: 0x96000000-
IRQ: 10 (no events)
Module Alias: "pci:v000014E4d
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #13 (PCI bridge)
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
Module Size Used by
usbhid 36882 0
hid 67742 1 usbhid
binfmt_misc 6599 1
parport_pc 26058 0
ppdev 5556 0
snd_hda_codec_idt 54887 1
joydev 8767 0
snd_hda_intel 22107 2
snd_hda_codec 87552 2 snd_hda_
i915 294989 5
snd_hwdep 5040 1 snd_hda_codec
snd_pcm 71475 2 snd_hda_
drm_kms_helper 30200 1 i915
snd_seq_midi 4588 0
snd_rawmidi 17783 1 snd_seq_midi
snd_seq_midi_event 6047 1 snd_seq_midi
snd_seq 47174 2 snd_seq_
drm 168092 5 i915,drm_kms_helper
snd_timer 19067 2 snd_pcm,snd_seq
snd_seq_device 5744 3 snd_seq_
hp_wmi 5223 0
uvcvideo 55847 0
intel_agp 26694 2 i915
snd 49038 13 snd_hda_
psmouse 59033 0
videodev 43098 1 uvcvideo
i2c_algo_bit 5168 1 i915
video 18712 1 i915
v4l1_compat 13359 2 uvcvideo,videodev
serio_raw 4022 0
agpgart 32011 2 drm,intel_agp
soundcore 880 1 snd
snd_page_alloc 7120 2 snd_hda_
output 1883 1 video
lp 7342 0
parport 31492 3 parport_pc,ppdev,lp
ahci 19198 1
libahci 21664 1 ahci
r8169 36489 0
mii 4425 1 r8169
|
Revision history for this message
|
#4 |
Hi,
You need to install the following Broadcom driver package using apt-get or Synaptic package manager: bcmwl-kernel-source
This will of course require a working wirED Internet connection in Ubuntu. (wired, not wireless)
For example: using the Terminal, you need to run the following commands to install bcmwl-kernel-
sudo apt-get update
sudo apt-get install bcmwl-kernel-source
Then reboot and retest wireless using Network Manager.
A similar explanation can be found at the end of this thread:
https:/
Regards,
Mark
|
Revision history for this message
|
#5 |
Thanks marcus aurelius, that solved my question.
|
Revision history for this message
|
#6 |
Thanks Mark your fix worked
