Ubuntu
gnome-nettool package

RT61 Drivers with Ubuntu 10.10 (Maverick) 64bit

Asked by Extendon

I am trying to get rt61 drivers working for my 64bit installation. (uname -r .6.35-22-generic)

the card is RaLink RT2561/RT61 802.11g PCI

I have removed the legacy rt61pci and replaced with the Ralink 1.1.2.6 drivers from the website

compilation and loading the driver worked. updated the rt61sta.dat

however when i try to scan the network i get

# iwlist ra0 scan
ra0 Failed to read scan data : Argument list too long
the other strange thing is that sometime iwlist works and shows me an available network.

and

# iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

ra0 RT61 Wireless ESSID:""
          Mode:Auto Frequency:2.412 GHz Bit Rate=54 Mb/s
          RTS thr:off Fragment thr:off
          Encryption key:off
          Link Quality=0/100 Signal level:-121 dBm Noise level:-79 dBm
          Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
          Tx excessive retries:0 Invalid misc:0 Missed beacon:0

Have read through the forums and found nothing relevant to this situation.

Can anyone advise on best option for this card and distro?

Question information

Language:
English Edit question
Status:
Needs information
For:
Ubuntu gnome-nettool Edit question
Assignee:
Mark Rijckenberg Edit question
Last query:
Last reply:
Revision history for this message
Mark Rijckenberg (markrijckenberg) said : 		#1

Hi,

Please first connect your network card to the wireless router using an ethernet cable (also known as a LAN cable).

In order to gather essential troubleshooting information about your wireless card, please follow this procedure:

Step 1: Open Terminal from "Applications->Accessories->Terminal"

Step 2: Please copy-paste the following command from the https://answers.launchpad.net/ubuntu website in Firefox into the Linux Terminal. Do NOT copy-paste from the Email message into the Terminal, as that will only copy PART of the command. The command STARTS with the word sudo and ENDS with the word lsmod. So please copy-paste the ENTIRE command below from Firefox into a Terminal, press <enter>, then enter password when sudo asks for password, then press enter again.

Tip: If you have a wheel mouse or 3 button mouse you do not need to type commands into the Terminal. Highlight the command written on the page. Move your cursor anywhere in the Terminal and press the wheel or middle button. Automatic Copy and paste! No spelling mistakes! No Typos! No other errors!

sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; sudo lshw -short; uname -a; dmesg | egrep 'acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|ndiswrapper|NPE|ound|p54|prism|rtl|rt2|rt3|usb|witch|wl'; iwconfig; cat /etc/modprobe.d/* | egrep 'acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|witch|wl'; sudo hwinfo --netcard ; cat /var/lib/NetworkManager/NetworkManager.state; sudo lsmod

Step 3: Please post results (copy/paste terminal output) on this thread. The troubleshooters here need to see the full Terminal output from running the above command.

Step 4: Please also specify the exact model and make of your PC (if known) on this thread

Regards,

Mark

Revision history for this message
Extendon (extendon) said : 		#2

Hi
I went and reinstalled it just to make sure that the legacy drivers wont work. I have now run the commands in a fresh install with no changes made. The results of the command areas below. from this can you possibly advice what the driver options would be. I am on a amd64 Phenom x4 processor with a Gigabyte UGH890 motherboard, self built.:

 *-network
       description: Ethernet interface
       product: RTL8111/8168B PCI Express Gigabit Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: eth0
       version: 03
       serial: 6c:f0:49:e7:d0:55
       size: 100MB/s
       capacity: 1GB/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.0.3 latency=0 link=yes multicast=yes port=MII speed=100MB/s
       resources: irq:43 ioport:ce00(size=256) memory:fdfff000-fdffffff memory:fdff8000-fdffbfff memory:fdf00000-fdf1ffff
  *-network DISABLED
       description: Wireless interface
       product: RT2561/RT61 802.11g PCI
       vendor: RaLink
       physical id: 7
       bus info: pci@0000:04:07.0
       logical name: wlan0
       version: 00
       serial: 00:a1:b0:30:0d:4d
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=rt61pci driverversion=2.6.35-23-generic firmware=N/A latency=32 link=yes multicast=yes wireless=IEEE 802.11bg
       resources: irq:21 memory:fdcf0000-fdcf7fff
0: phy0: Wireless LAN
 Soft blocked: no
 Hard blocked: no
lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

wlan0 Interface doesn't support scanning : Network is down

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet dhcp
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=10.10
DISTRIB_CODENAME=maverick
DISTRIB_DESCRIPTION="Ubuntu 10.10"
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate [1022:9601]
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) [1022:9602]
00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) [1022:9605]
00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5) [1022:9609]
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] [1002:4390] (rev 40)
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 41)
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (rev 40)
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] (rev 40)
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40)
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399]
00:15.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a0]
00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS880 [Radeon HD 4290] [1002:9714]
01:05.1 Audio device [0403]: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] [1002:970f]
02:00.0 USB Controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03)
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
04:07.0 Network controller [0280]: RaLink RT2561/RT61 802.11g PCI [1814:0301]
04:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024]
05:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02)
05:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02)
Bus 008 Device 002: ID 1043:8012 iCreate Technologies Corp.
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 413c:2003 Dell Computer Corp. Keyboard
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0461:4d22 Primax Electronics, Ltd
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 005: ID 0951:1624 Kingston Technology
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 15e4:0074
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
H/W path Device Class Description
==========================================================
                                   system GA-890GPA-UD3H
/0 bus GA-890GPA-UD3H
/0/0 memory 128KiB BIOS
/0/4 processor AMD Phenom(tm) II X4 965 Processor
/0/4/a memory 128KiB L1 cache
/0/4/c memory 512KiB L3 cache
/0/b memory 128KiB L1 cache
/0/2a memory 4GiB System Memory
/0/2a/0 memory 2GiB DIMM 1333 MHz (0.8 ns)
/0/2a/1 memory DIMM 400 MHz (2.5 ns) [empty]
/0/2a/2 memory 2GiB DIMM 1333 MHz (0.8 ns)
/0/2a/3 memory DIMM 400 MHz (2.5 ns) [empty]
/0/100 bridge RS780 Host Bridge Alternate
/0/100/1 bridge RS780 PCI to PCI bridge (int gfx)
/0/100/1/5 display RS880 [Radeon HD 4290]
/0/100/1/5.1 multimedia RS880 Audio Device [Radeon HD 4200]
/0/100/5 bridge RS780 PCI to PCI bridge (PCIE port 1)
/0/100/5/0 bus uPD720200 USB 3.0 Host Controller
/0/100/a bridge RS780 PCI to PCI bridge (PCIE port 5)
/0/100/a/0 eth0 network RTL8111/8168B PCI Express Gigabit Ethernet controller
/0/100/11 scsi4 storage SB700/SB800 SATA Controller [IDE mode]
/0/100/11/0.0.0 /dev/sda disk 640GB WDC WD6402AAEX-0
/0/100/11/0.0.0/1 /dev/sda1 volume 29GiB EXT4 volume
/0/100/11/0.0.0/2 /dev/sda2 volume 8189MiB Linux filesystem partition
/0/100/11/0.0.0/3 /dev/sda3 volume 149GiB Linux LVM Physical Volume partition
/0/100/11/0.0.0/4 /dev/sda4 volume 408GiB Extended partition
/0/100/11/0.0.0/4/5 /dev/sda5 volume 8369MiB Linux swap / Solaris partition
/0/100/11/0.0.0/4/6 /dev/sda6 volume 399GiB Linux LVM Physical Volume partition
/0/100/12 bus SB700/SB800 USB OHCI0 Controller
/0/100/12.2 bus SB700/SB800 USB EHCI Controller
/0/100/13 bus SB700/SB800 USB OHCI0 Controller
/0/100/13.2 bus SB700/SB800 USB EHCI Controller
/0/100/14 bus SBx00 SMBus Controller
/0/100/14.1 storage SB700/SB800 IDE Controller
/0/100/14.2 multimedia SBx00 Azalia (Intel HDA)
/0/100/14.3 bridge SB700/SB800 LPC host controller
/0/100/14.4 bridge SBx00 PCI to PCI Bridge
/0/100/14.4/7 wlan0 network RT2561/RT61 802.11g PCI
/0/100/14.4/e bus TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
/0/100/14.5 bus SB700/SB800 USB OHCI2 Controller
/0/100/15 bridge ATI Technologies Inc
/0/100/15/0 storage JMB362/JMB363 Serial ATA Controller
/0/100/15/0.1 scsi0 storage JMB362/JMB363 Serial ATA Controller
/0/100/15/0.1/0.0.0 /dev/cdrom disk DVD-ROM GDR8163B
/0/100/15/0.1/0.0.0/0 /dev/cdrom disk
/0/100/16 bus SB700/SB800 USB OHCI0 Controller
/0/100/16.2 bus SB700/SB800 USB EHCI Controller
/0/101 bridge Family 10h Processor HyperTransport Configuration
/0/102 bridge Family 10h Processor Address Map
/0/103 bridge Family 10h Processor DRAM Controller
/0/104 bridge Family 10h Processor Miscellaneous Control
/0/105 bridge Family 10h Processor Link Control
/0/1 scsi13 storage
/0/1/0.0.0 /dev/sdb disk 1055MB SCSI Disk
/0/1/0.0.0/1 /dev/sdb1 volume 1004MiB Windows FAT volume
/0/2 scsi14 storage
/0/2/0.0.0 /dev/sdc disk 4016MB SCSI Disk
/0/2/0.0.0/1 /dev/sdc1 volume 3828MiB Windows FAT volume
Linux ubuntu-DAW 2.6.35-23-generic #41-Ubuntu SMP Wed Nov 24 11:55:36 UTC 2010 x86_64 GNU/Linux
[ 0.000000] No AGP bridge found
[ 0.000000] found SMP MP-table at [ffff8800000f4440] f4440
[ 0.000000] No NUMA configuration found
[ 0.000000] No AGP bridge found
[ 0.310028] Switch to broadcast mode on CPU1
[ 0.480019] Switch to broadcast mode on CPU2
[ 0.650017] Switch to broadcast mode on CPU3
[ 0.651723] Switch to broadcast mode on CPU0
[ 0.678511] ACPI: No dock devices found.
[ 0.724960] HEST: Table is not found!
[ 0.725122] usbcore: registered new interface driver usbfs
[ 0.725122] usbcore: registered new interface driver hub
[ 0.725122] usbcore: registered new device driver usb
[ 0.725122] Switching to clocksource tsc
[ 0.726676] pnp: PnP ACPI: found 11 devices
[ 0.830579] ERST: Table is not found!
[ 0.852391] hub 1-0:1.0: USB hub found
[ 0.872354] hub 2-0:1.0: USB hub found
[ 0.892341] hub 3-0:1.0: USB hub found
[ 0.956357] hub 4-0:1.0: USB hub found
[ 1.016345] hub 5-0:1.0: USB hub found
[ 1.084114] hub 6-0:1.0: USB hub found
[ 1.144113] hub 7-0:1.0: USB hub found
[ 1.144249] PNP: No PS/2 controller found. Probing ports directly.
[ 1.180053] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.420480] device-mapper: multipath: version 1.1.1 loaded
[ 1.420482] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.421262] powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor (4 cpu cores) (version 2.20.00)
[ 1.421825] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.468261] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc9001112a000, 6c:f0:49:e7:d0:55, XID 083000c0 IRQ 43
[ 1.571941] usb 3-3: new high speed USB device using ehci_hcd and address 2
[ 1.735701] scsi10 : usb-storage 3-3:1.0
[ 1.735766] usbcore: registered new interface driver usb-storage
[ 2.060045] usb 4-5: new low speed USB device using ohci_hcd and address 2
[ 2.288153] usbcore: registered new interface driver hiddev
[ 2.292397] input: USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input2
[ 2.292445] generic-usb 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:12.0-5/input0
[ 2.292458] usbcore: registered new interface driver usbhid
[ 2.292460] usbhid: USB HID core driver
[ 2.611918] usb 5-1: new low speed USB device using ohci_hcd and address 2
[ 2.823424] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input3
[ 2.823467] generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:13.0-1/input0
[ 4.952419] lp: driver loaded but no devices found
[ 4.963678] usb usb8: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
[ 4.963758] hub 8-0:1.0: USB hub found
[ 5.430306] r8169 0000:03:00.0: eth0: link up
[ 5.430310] r8169 0000:03:00.0: eth0: link up
[ 5.869373] radeon 0000:01:05.0: Error during ACPI methods call
[ 6.252245] Console: switching to colour frame buffer device 160x45
[ 15.811884] eth0: no IPv6 routers present
[ 16.980914] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 3960.830545] [<ffffffff8100a0f2>] system_call_fastpath+0x16/0x1b
[ 4080.831776] [<ffffffff8100a0f2>] system_call_fastpath+0x16/0x1b
[ 4200.831766] [<ffffffff8100a0f2>] system_call_fastpath+0x16/0x1b
[ 4320.830577] [<ffffffff8100a0f2>] system_call_fastpath+0x16/0x1b
[ 4440.830526] [<ffffffff8100a0f2>] system_call_fastpath+0x16/0x1b
[ 4560.830528] [<ffffffff8100a0f2>] system_call_fastpath+0x16/0x1b
[ 4680.830541] [<ffffffff8100a0f2>] system_call_fastpath+0x16/0x1b
[ 4800.830519] [<ffffffff8100a0f2>] system_call_fastpath+0x16/0x1b
[ 4920.830516] [<ffffffff8100a0f2>] system_call_fastpath+0x16/0x1b
[ 5040.840523] [<ffffffff8100a0f2>] system_call_fastpath+0x16/0x1b
[ 9187.263159] usb 3-3: USB disconnect, address 2
[ 9407.380089] usb 3-4: new high speed USB device using ehci_hcd and address 3
[ 9407.533964] scsi11 : usb-storage 3-4:1.0
[ 9436.825259] usb 3-4: USB disconnect, address 3
[ 9438.960111] usb 3-3: new high speed USB device using ehci_hcd and address 4
[ 9439.122200] scsi12 : usb-storage 3-3:1.0
[ 9471.161328] usb 3-3: reset high speed USB device using ehci_hcd and address 4
[ 9502.201339] usb 3-3: reset high speed USB device using ehci_hcd and address 4
[ 9512.322128] usb 3-3: USB disconnect, address 4
[ 9538.591405] usb 8-3: new high speed USB device using xhci_hcd and address 0
[ 9538.615741] scsi13 : usb-storage 8-3:1.0
[ 9570.201114] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[ 9590.821957] usb 3-3: new high speed USB device using ehci_hcd and address 5
[ 9590.983041] scsi14 : usb-storage 3-3:1.0
[ 9601.241829] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[ 9632.280922] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[ 9663.301736] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[ 9694.201839] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[ 9725.241787] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[ 9756.201149] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[ 9787.161719] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[ 9818.121831] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[ 9849.081771] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[ 9880.121791] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[ 9911.241844] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[ 9942.201193] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[ 9973.241766] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10004.290485] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10035.241836] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10066.201793] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10097.241763] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10128.281728] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10159.241837] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10190.201793] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10221.241761] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10252.200495] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10283.161832] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10314.201809] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10345.250530] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10376.281729] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10407.241839] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10438.200543] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10469.241760] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10550.205261] usb 8-3: Cannot reset HCD device state
[10550.470179] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10581.241768] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10612.201735] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10643.161705] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10674.201795] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10705.243892] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10736.281731] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10767.249841] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10798.201785] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10829.241751] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10860.201717] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10891.161822] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10922.201775] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10953.240490] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[10984.201848] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11015.161795] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11046.201760] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11077.246478] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11108.281829] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11139.171814] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11170.200505] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11201.241234] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11232.281833] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11263.241784] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11294.201748] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11325.241715] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11356.200556] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11387.161767] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11418.201735] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11449.241843] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11480.281789] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11511.161756] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11542.210498] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11573.240818] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11604.200526] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11635.160492] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11666.201841] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11697.240558] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11728.201748] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11759.161848] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11790.201795] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11821.241756] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11852.281857] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11883.241801] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11914.201762] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11945.241724] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[11976.280559] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12057.161352] usb 8-3: Cannot reset HCD device state
[12057.430206] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12088.201788] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12119.161747] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12150.201701] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12181.240549] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12212.281754] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12243.240603] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12274.201051] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12305.241755] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12336.201851] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12367.161796] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12398.200506] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12429.241854] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12460.281820] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12491.241754] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12522.200607] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12553.241795] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12584.281753] usb 8-3: reset high speed USB device using xhci_hcd and address 2
[12615.241707] usb 8-3: reset high speed USB device using xhci_hcd and address 2
lo no wireless extensions.

eth0 no wireless extensions.

wlan0 IEEE 802.11bg ESSID:off/any
          Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
          Retry long limit:7 RTS thr:off Fragment thr:off
          Power Management:off

# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist twl4030_wdt
options iwlagn 11n_disable=1
sudo: hwinfo: command not found
cat: /var/lib/NetworkManager/NetworkManager.state: No such file or directory
Module Size Used by
nls_iso8859_1 4657 1
nls_cp437 6375 2
vfat 10954 1
fat 56244 1 vfat
nls_utf8 1453 1
isofs 34218 2
parport_pc 30086 0
ppdev 6804 0
snd_hda_codec_atihdmi 3079 1
snd_hda_codec_realtek 299524 1
radeon 908938 2
snd_hda_intel 26019 2
snd_hda_codec 100919 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
ttm 68212 1 radeon
snd_seq_midi 5932 0
drm_kms_helper 32836 1 radeon
snd_rawmidi 22207 1 snd_seq_midi
snd_hwdep 6660 1 snd_hda_codec
snd_seq_midi_event 7291 1 snd_seq_midi
drm 206161 4 radeon,ttm,drm_kms_helper
snd_pcm 89104 2 snd_hda_intel,snd_hda_codec
snd_seq 57512 2 snd_seq_midi,snd_seq_midi_event
snd_timer 23850 2 snd_pcm,snd_seq
snd_seq_device 6912 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 64117 13 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_device
arc4 1497 2
rt61pci 21534 0
rt2x00pci 6993 1 rt61pci
rt2x00lib 31575 2 rt61pci,rt2x00pci
led_class 3393 1 rt2x00lib
mac80211 266657 2 rt2x00pci,rt2x00lib
soundcore 1240 1 snd
ieee1394 95219 0
cfg80211 170293 2 rt2x00lib,mac80211
i2c_piix4 10047 0
snd_page_alloc 8588 2 snd_hda_intel,snd_pcm
edac_core 46822 0
serio_raw 4910 0
k10temp 3535 0
edac_mce_amd 9387 0
i2c_algo_bit 6208 1 radeon
eeprom_93cx6 1789 1 rt61pci
shpchp 34910 0
xhci_hcd 58578 0
lp 10201 0
parport 37032 3 parport_pc,ppdev,lp
usbhid 42062 0
hid 84678 1 usbhid
usb_storage 50372 1
floppy 65299 0
firewire_ohci 24679 0
firewire_core 54327 81 firewire_ohci
r8169 42222 0
crc_itu_t 1739 2 rt61pci,firewire_core
mii 5261 1 r8169
ahci 21857 0
pata_atiixp 4405 0
pata_jmicron 2771 1
libahci 26199 6 ahci

Revision history for this message
Mark Rijckenberg (markrijckenberg) said : 		#3

Can you also send us the output of this command?

dmesg | grep rt6 ; cat /etc/network/interfaces

Can you help with this problem?

Provide an answer of your own, or ask Extendon for more information if necessary.

To post a message you must log in.