Have Ubuntu 10.04 LTs and can't connect to wireless router
I have ubuntu 10.04 LTS on a mini laptop Dell Inspiron mini 10 I tried to connect to my wireless at home and it just wont connect it keeps asking me for my Password on my wireless I know Im putting in the correct password because my other laptop, ipad, and iphone r connecting to the wireless router. I am new to the ubuntu software so i did all of the trouble shootings. I can connect by using the wired connection with the ethernet cord and it's working fine. Ii have a comcast netgear router. Please help
Question information
- Language:
- English Edit question
- Status:
- Answered
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
In order to gather essential troubleshooting information about your wireless card, please follow this procedure:
Step 1: Open Terminal from "Applications-
Step 2: Please copy-paste the following command from this page in browser Firefox into the Linux Terminal.
Do NOT copy-paste from the Email message into the Terminal, as that will only copy PART of the command.
The command STARTS with the word sudo and ENDS with the word dist-upgrade;
So please copy-paste the ENTIRE command below from Firefox into a Terminal, press <enter>,
then enter password when sudo asks for password, then press enter again.
sudo dpkg --configure -a; sudo apt-get -f install; sudo apt-get update; sudo apt-get dist-upgrade;
Then reboot your pc and test if your wireless card is detected, if not continue from the step 3 below
Step 3: Please copy-paste the following command from this page in Firefox into the Linux Terminal.
Do NOT copy-paste from the Email message into the Terminal, as that will only copy PART of the command.
The command STARTS with the word sudo and ENDS with the word restart.
So please copy-paste the ENTIRE command below from Firefox into a Terminal, press <enter>,
then enter password when sudo asks for password, then press enter again.
Tip: If you have a wheel mouse or 3 button mouse you do not need to type commands into the Terminal. Highlight the command written on the page. Move your cursor anywhere in the Terminal and press the wheel or middle button. Automatic Copy and paste! No spelling mistakes! No Typos! No other errors!
sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/
Step 4: Please post results (copy/paste terminal output) on this thread. The troubleshooters here need to see the full Terminal output from running the above command.
Step 5: Step 4: Please also specify the exact model and make of your PC (if known).
-------
New to Ubuntu: read the Ubuntu Manual, it's very informative: http://
Click on the "download Button" to download the latest PDF version.
The online help https:/
Relax and fun:
http://
|
Revision history for this message
|
#2 |
Hello I did everything u told me to do and its still not connecting to my wireless
|
Revision history for this message
|
#3 |
pls copy and paste here the output of following commands (run them in a terminal)
sudo ifconfig
sudo iwconfig
|
Revision history for this message
|
#4 |
eth0 Link encap:Ethernet HWaddr 00:24:e8:cd:98:6d
inet addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::224:
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:45465 errors:0 dropped:0 overruns:0 frame:0
TX packets:25158 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:66747823 (66.7 MB) TX bytes:2069264 (2.0 MB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:312 errors:0 dropped:0 overruns:0 frame:0
TX packets:312 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:61156 (61.1 KB) TX bytes:61156 (61.1 KB)
wlan0 Link encap:Ethernet HWaddr 00:26:5e:54:db:77
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
therese@
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:off/any
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
pan0 no wireless extensions.
|
Revision history for this message
|
#5 |
pls run in a terminal and copy/paste here output of
sudo iwlist wlan0 scan
|
Revision history for this message
|
#6 |
wlan0 Scan completed :
Cell 01 - Address: 00:26:F2:06:30:CC
Cell 02 - Address: 3C:EA:4F:7D:4B:51
Cell 03 - Address: 00:26:F2:03:07:8A
|
Revision history for this message
|
#7 |
ok Therese, there is nothing wrong with the driver and the wlan0 interface.
wlan0 interface 'sees' 2 cells (Access Points) as follows
SSID Arie PC
SSID 2WIRE233
both cells have keys set. which one of the two above do you have access (are manager of) please ?
on the desktop upper panel on the right hand side of it, somewhere close to the sound applet there should be the networking applet. if you left click on it you should see the two SSID's above listed if wireless networks is enabled (see below).
if you right click on it you can enable wireless networks and can Edit Connections.... so, pls enable wireless if not done yet and open Edit Connections.....
- left click on the Wireless tab; click on Add button --> a new window opens; here on SSID box enter ONE of the two SSID above listed that you have access to/are manager of
- place check mark on Connect automatically
- select and make sure that Infrastructure is selected on Mode; MTU should be automatic; the other boxes leave empty
- left click Wireless security tab - if you press the down arrow of Security box a whole list of options will be listed; you MUST SELECT THE ONE that matches your router security (that was set on the ROUTER) - please make sure of this
- left click IPv4 Settings tab - Method box must show Automatic (DHCP) - make sure of this
- click Apply then OK/close
if the router is configured ok you should be able to connect. let me know how it goes. pls utmost care in Network conf above.
|
Revision history for this message
|
#8 |
Hi I tried everything u have asked me to check and everything is correct but its still not connecting to the internet via wireless I just receive an AT&T laptopconnect card (broadband) and it's working fine also. Below is the wireless security settings for my router I got when I login to my wireless router account.
Wireless Settings
Wireless Network
Name (SSID): AriePC
Region: United States
Channel: Auto
Mode: b and g
Security Options
None
WEP
WPA-PSK [TKIP]
WPA2-PSK [AES]
WPA-PSK [TKIP] + WPA2-PSK [AES] (This is check)
Security Options (WPA-PSK + WPA2-PSK)
Passphrase: Block
|
Revision history for this message
|
#9 |
Therese, when the pc interface scanned for AP's it detected - see above
Arie PC
while the router is
AriePC
they are different - see it ? white spaces vs no white spaces; this thing MUST be corrected, doesn't matter which one is changed BUT they must be the same - on the router and on the the config file otherwise there is no connection possible.
secondly, it appears that you're quite conversant with the router (you can log in etc) , so just to recap, your ISP for sure gave you a user and password for the ROUTER conn'n to his network which should not be touched. then there is the router that MAY or MAY NOT have a password/encryption key set - this the key that must be entered into the interface config file exactly in terms of TYPE and VALUE.
so, what I would suggest, for the purpose of debugging (where is the conn'n problem on the router or on the pc side) is to temporarily remove any encryption keys on the router first as well as on the pc config file and see whther you're able to connect. needless to say that after these resettings done the they must be saved in the router config as well as in the pc interface file. in addition, after the save on the config file please reboot the pc and see whether a connection is obtained.
if yes then just reverse the procedure - set the encryption key on the router first then on the interface file and reboot.
btw, please verify the router configuration and check whether DHCP is enabled - it must be, and whether the MAC filter is set or not. if it set then please enter your wifi interface MAC (in your case it is 00:26:5e:54:db:77) on the MAC allowed list. both last 2 items v imp.
|
Revision history for this message
|
#10 |
sorry, I forgot, would you please run in a terminal
lsmod
command and copy/paste here its output ? TU.
|
Revision history for this message
|
#11 |
more Therese pls, it just occurred to me - KEEP the SSID with NO WHITE SPACES pls ie AriePC
|
Revision history for this message
|
#12 |
Module Size Used by
rfcomm 33421 4
sco 7885 2
binfmt_misc 6587 1
ppdev 5259 0
bridge 45582 0
stp 1655 1 bridge
bnep 9436 2
l2cap 30624 16 rfcomm,bnep
snd_hda_
snd_hda_intel 21941 2
joydev 8708 0
snd_hda_codec 74201 2 snd_hda_
snd_hwdep 5412 1 snd_hda_codec
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
fbcon 35102 71
tileblit 2031 1 fbcon
snd_pcm 70662 3 snd_hda_
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
vga16fb 11385 0
vgastate 8961 1 vga16fb
snd_seq_dummy 1338 0
snd_seq_oss 26726 0
snd_seq_midi 4557 0
arc4 1153 2
snd_rawmidi 19056 1 snd_seq_midi
dell_wmi 1793 0
snd_seq_midi_event 6003 2 snd_seq_
snd_seq 47263 6 snd_seq_
snd_timer 19098 2 snd_pcm,snd_seq
snd_seq_device 5700 5 snd_seq_
compal_laptop 2034 0
b43 163523 0
usbhid 36110 0
i915 285586 3
drm_kms_helper 29297 1 i915
mac80211 205146 1 b43
snd 54148 16 snd_hda_
intel_agp 24119 2 i915
uvcvideo 56990 0
dcdbas 5422 0
btusb 10925 2
bluetooth 49892 9 rfcomm,
drm 162409 4 i915,drm_kms_helper
hid 67032 1 usbhid
cfg80211 126517 2 b43,mac80211
soundcore 6620 1 snd
usb_storage 39425 0
videodev 34361 1 uvcvideo
v4l1_compat 13251 2 uvcvideo,videodev
psmouse 63245 0
serio_raw 3978 0
i2c_algo_bit 5028 1 i915
led_class 2864 1 b43
snd_page_alloc 7076 2 snd_hda_
agpgart 31724 2 intel_agp,drm
video 17375 1 i915
output 1871 1 video
lp 7028 0
parport 32635 2 ppdev,lp
r8169 34076 0
mii 4381 1 r8169
ssb 38671 1 b43
|
Revision history for this message
|
#13 |
browsing for AT&T laptopconnect card that you mentioned above I found this
would you please indicate which one of the devices listed is the one you're using ?
first please in the terminal under Edit-->Profile preferences-
lsusb -v
lspci
sudo dmidecode
commands and copy/paste output here ? TU.
I suspect that this card acts as a modem and it mounts as a CD. but first let me see the output
|
Revision history for this message
|
#14 |
# dmidecode 2.9
SMBIOS 2.5 present.
33 structures occupying 1164 bytes.
Table at 0x000F1FC0.
Handle 0xDA00, DMI type 218, 131 bytes
OEM-specific Type
Header and Data:
DA 83 00 DA B2 00 D2 0B 0E 32 00 7D 00 00 00 00
00 80 01 16 00 01 00 7F 01 16 00 00 00 2E 00 25
00 00 00 6E 00 25 00 01 00 2D 00 25 00 02 00 8A
01 48 00 01 00 89 01 48 00 00 00 9B 00 23 00 01
00 9C 00 23 00 00 00 14 01 46 00 00 00 15 01 46
00 01 00 16 01 46 00 02 00 94 01 47 00 01 00 93
01 47 00 00 00 EA 00 67 00 01 00 EB 00 67 00 00
00 00 FE 00 00 00 00 01 FE 00 00 01 00 FF FF 00
00 00 00
Handle 0x0001, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: A06
Release Date: 07/29/2009
Address: 0xE6690
Runtime Size: 104816 bytes
ROM Size: 2048 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
ACPI is supported
USB legacy is supported
Smart battery is supported
BIOS boot specification is supported
Targeted content distribution is supported
Handle 0x0002, DMI type 1, 27 bytes
System Information
Manufacturer: Dell Inc.
Product Name: Inspiron 1011
Version: A06
Serial Number: 4FYJPK1
UUID: 44454C4C-
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0003, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: CN0Y53
Version: A06
Serial Number: .4FYJPK1.
Handle 0x0004, DMI type 3, 17 bytes
Chassis Information
Manufacturer: Dell Inc.
Type: Portable
Lock: Not Present
Version: A06
Serial Number: 4FYJPK1
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Handle 0x0005, DMI type 4, 40 bytes
Processor Information
Socket Designation: U1
Type: Central Processor
Family: Other
Manufacturer: Intel
ID: C2 06 01 00 FF FB E9 BF
Version: C0
Voltage: 1.2 V
External Clock: 533 MHz
Max Speed: 2048 MHz
Current Speed: 1600 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: 0x0006
L2 Cache Handle: 0x0007
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 1
Core Enabled: 1
Thread Count: 2
Characteristics: None
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 KB
Maximum Size: 32 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0007, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 512 KB
Maximum Size: 4096 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: MONITOR
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Ethernet
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x000B, DMI type 9, 13 bytes
System Slot Information
Designation: MiniPCIe Slot J7
Type: 32-bit PCI Express
Current Usage: In Use
Length: Long
ID: 8
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x000C, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Disabled
Description: Realtek HDA-00
Handle 0x000D, DMI type 11, 5 bytes
OEM Strings
String 1: Dell System
String 2: 5[0003]
String 3: 13[PP39S]
Handle 0x000E, DMI type 12, 5 bytes
System Configuration Options
Option 1: Jumper settings can be described here.
Handle 0x000F, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 2 GB
Error Information Handle: Not Provided
Number Of Devices: 1
Handle 0x0010, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000F
Error Information Handle: No Error
Total Width: 32 bits
Data Width: 32 bits
Size: 1024 MB
Form Factor: SODIMM
Set: 1
Locator: M1
Bank Locator: Bank 0
Type: DDR2
Type Detail: Synchronous
Speed: 533 MHz (1.9 ns)
Manufacturer:
Serial Number:
Asset Tag:
Part Number:
Handle 0x0011, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Array Handle: 0x000F
Partition Width: 0
Handle 0x0012, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0010
Memory Array Mapped Address Handle: 0x0011
Partition Row Position: 1
Handle 0x0013, DMI type 22, 26 bytes
Portable Battery
Location: Rear
Manufacturer: Dell
Name: Dell
Design Capacity: 24420 mWh
Design Voltage: 11100 mV
SBDS Version: Bat123
Maximum Error: Unknown
SBDS Serial Number: 0000
SBDS Manufacture Date: 1980-00-00
SBDS Chemistry: LION
OEM-specific Information: 0x00000000
Handle 0x0014, DMI type 32, 20 bytes
System Boot Information
Status: <OUT OF SPEC>
Handle 0x8100, DMI type 129, 10 bytes
OEM-specific Type
Header and Data:
81 0A 00 81 01 01 02 01 01 02
Strings:
Intel_ASF
Intel_ASF_001
Handle 0x8800, DMI type 136, 6 bytes
OEM-specific Type
Header and Data:
88 06 00 88 FF FF
Handle 0xB000, DMI type 176, 5 bytes
OEM-specific Type
Header and Data:
B0 05 00 B0 00
Handle 0xB100, DMI type 177, 12 bytes
OEM-specific Type
Header and Data:
B1 0C 00 B1 1A 06 00 00 00 00 00 00
Handle 0xD000, DMI type 208, 12 bytes
OEM-specific Type
Header and Data:
D0 0C 00 D0 01 05 FE 00 F4 02 01 02
Strings:
20080101
20080101
Handle 0xD300, DMI type 211, 13 bytes
OEM-specific Type
Header and Data:
D3 0D 00 D3 01 03 02 01 00 02 03 04 04
Strings:
Front
1
3
5
Handle 0xD400, DMI type 212, 17 bytes
OEM-specific Type
Header and Data:
D4 11 00 D4 70 00 71 00 00 10 2D 2E FF FF 00 00
00
Handle 0xD800, DMI type 216, 9 bytes
OEM-specific Type
Header and Data:
D8 09 00 D8 01 02 01 F0 03
Strings:
Intel
00
Handle 0xDC00, DMI type 220, 20 bytes
OEM-specific Type
Header and Data:
DC 14 00 DC 01 F0 00 00 02 F0 00 00 03 F0 04 F0
00 00 00 00
Handle 0xDD00, DMI type 221, 19 bytes
OEM-specific Type
Header and Data:
DD 13 00 DD 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
Handle 0xDE00, DMI type 222, 20 bytes
OEM-specific Type
Header and Data:
DE 14 00 DE 01 02 FF FF 00 00 00 00 00 00 00 00
00 00 7F 04
Strings:
Handle 0x0020, DMI type 127, 4 bytes
End Of Table
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigura
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurat
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 1
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Interrupt
Synch Type None
Usage Type Data
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 004 Device 002: ID 413c:02b0 Dell Computer Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x413c Dell Computer Corp.
idProduct 0x02b0
bcdDevice 4.67
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigura
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 216
bNumInterfaces 4
bConfigurat
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 3
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Interrupt
Synch Type None
Usage Type Data
bInterval 1
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 1
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 1
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 2
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Isochronous
Synch Type None
Usage Type Data
bInterval 1
Endpoint Descriptor:
bLength 7
Transfer Type Isochronous
Synch Type None
Usage Type Data
bInterval 1
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 2
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Isochronous
Synch Type None
Usage Type Data
bInterval 1
Endpoint Descriptor:
bLength 7
Transfer Type Isochronous
Synch Type None
Usage Type Data
bInterval 1
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 2
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Isochronous
Synch Type None
Usage Type Data
bInterval 1
Endpoint Descriptor:
bLength 7
Transfer Type Isochronous
Synch Type None
Usage Type Data
bInterval 1
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 2
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Isochronous
Synch Type None
Usage Type Data
bInterval 1
Endpoint Descriptor:
bLength 7
Transfer Type Isochronous
Synch Type None
Usage Type Data
bInterval 1
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 2
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Isochronous
Synch Type None
Usage Type Data
bInterval 1
Endpoint Descriptor:
bLength 7
Transfer Type Isochronous
Synch Type None
Usage Type Data
bInterval 1
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 2
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Isochronous
Synch Type None
Usage Type Data
bInterval 1
Endpoint Descriptor:
bLength 7
Transfer Type Isochronous
Synch Type None
Usage Type Data
bInterval 1
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 2
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 1
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 1
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 0
bInterfac
bInterfac
bInterfac
iInterface 0
Device Firmware Upgrade Interface Descriptor:
bLength 7
Will Not Detach
Upload Supported
Download Supported
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigura
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurat
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 1
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Interrupt
Synch Type None
Usage Type Data
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigura
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurat
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 1
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Interrupt
Synch Type None
Usage Type Data
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 002 Device 002: ID 046d:c05a Logitech, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc05a
bcdDevice 54.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigura
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurat
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 1
bInterfac
bInterfac
bInterfac
iInterface 0
HID Device Descriptor:
bLength 9
bcdHID 1.11
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
Transfer Type Interrupt
Synch Type None
Usage Type Data
bInterval 10
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigura
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurat
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 1
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Interrupt
Synch Type None
Usage Type Data
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 001 Device 010: ID 1199:68a3 Sierra Wireless, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1199 Sierra Wireless, Inc.
idProduct 0x68a3
bcdDevice 0.06
iManufacturer 2
iProduct 1
iSerial 3
bNumConfigura
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 133
bNumInterfaces 4
bConfigurat
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 3
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Interrupt
Synch Type None
Usage Type Data
bInterval 5
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 0
bInterfac
bInterfac
bInterfac
iInterface 0
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 2
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 0
bInterfac
bInterfac
bInterfac
iInterface 0
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 2
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 3
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Interrupt
Synch Type None
Usage Type Data
bInterval 5
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. Mass Storage Device
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0bda Realtek Semiconductor Corp.
idProduct 0x0158 Mass Storage Device
bcdDevice 58.88
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigura
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurat
iConfiguration 4
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 2
bInterfac
bInterfac
bInterfac
iInterface 5
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 0
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 0
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 001 Device 003: ID 064e:a129 Suyin Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x064e Suyin Corp.
idProduct 0xa129
bcdDevice 92.20
iManufacturer 2
iProduct 1
iSerial 0
bNumConfigura
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 666
bNumInterfaces 2
bConfigurat
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
** UNRECOGNIZED: 28 ff 42 49 53 54 00 01 06 01 10 00 00 00 00 00 d1 10 f4 01 d2 11 f4 01 d3 12 f4 01 d4 13 f4 01 d5 14 f4 01 d6 15 f4 01
Interface Association:
bLength 8
bDescript
bFirstInt
bInterfac
bFunction
bFunction
bFunction
iFunction 5
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 1
bInterfac
bInterfac
bInterfac
iInterface 5
VideoControl Interface Descriptor:
bLength 13
bcdUVC 1.00
VideoControl Interface Descriptor:
bLength 9
bTerminalID 2
bSourceID 5
iTerminal 0
VideoControl Interface Descriptor:
bLength 26
bUnitID 4
bNumControl 8
bNrPins 1
baSourceID( 0) 3
bmControls( 0) 0x0f
iExtension 0
VideoControl Interface Descriptor:
bLength 27
bUnitID 5
bNumControl 9
bNrPins 1
baSourceID( 0) 4
bmControls( 0) 0xff
bmControls( 1) 0x01
iExtension 0
VideoControl Interface Descriptor:
bLength 18
bTerminalID 1
iTerminal 0
bmControls 0x00040000
Privacy
VideoControl Interface Descriptor:
bLength 11
Warning: Descriptor too short
bUnitID 3
bSourceID 1
bmControls 0x0000157f
Contrast
Hue
Sharpness
Gamma
White Balance Temperature
Backlight Compensation
Power Line Frequency
White Balance Temperature, Auto
iProcessing 0
Endpoint Descriptor:
bLength 7
Transfer Type Interrupt
Synch Type None
Usage Type Data
bInterval 6
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 0
bInterfac
bInterfac
bInterfac
iInterface 0
VideoStre
bLength 14
bNumFormats 1
bmInfo 0
VideoStre
bLength 27
guidFormat {59555932-
Fields per frame: 1 fields
Field 1 first: No
Field pattern: Field 1 only
VideoStre
bLength 46
bFrameIndex 1
Still image unsupported
wWidth 640
wHeight 480
VideoStre
bLength 46
bFrameIndex 2
Still image unsupported
wWidth 352
wHeight 288
VideoStre
bLength 46
bFrameIndex 3
Still image unsupported
wWidth 320
wHeight 240
VideoStre
bLength 46
bFrameIndex 4
Still image unsupported
wWidth 176
wHeight 144
VideoStre
bLength 46
bFrameIndex 5
Still image unsupported
wWidth 160
wHeight 120
VideoStre
bLength 34
bFrameIndex 6
Still image unsupported
wWidth 800
wHeight 600
VideoStre
bLength 34
bFrameIndex 7
Still image unsupported
wWidth 1024
wHeight 768
VideoStre
bLength 34
bFrameIndex 8
Still image unsupported
wWidth 1280
wHeight 1024
VideoStre
bLength 6
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 1
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
bInterval 1
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 1
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
bInterval 1
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 1
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
bInterval 1
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 1
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
bInterval 1
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 1
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
bInterval 1
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 1
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
bInterval 1
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigura
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurat
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 1
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Interrupt
Synch Type None
Usage Type Data
bInterval 12
can't get hub descriptor: Operation not permitted
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
03:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Hi Peter I Am using the AT&T USBConnect Lighting Laptopconnect card
|
Revision history for this message
|
#15 |
got it Therese; it appears that ATT's USBConnect Lighting Laptopconnect card has
ID 1199:68a3 Sierra Wireless, Inc.
first, just to be sure, and better seen also by you, pls run
lsusb
command with the ATT's USBConnect Lighting Laptopconnect card inserted in a usb port and copy/paste output here. for sure it'll be there. this is a 3G modem that in ubuntu is recognized as a storage device. in order to make it work as a modem obviously it must be switched from a storage device to a modem. the 'tools' needed for this are 2 packages that are in lucid's repository that have to be installed first; here below are the commands
sudo apt-get install usb-modeswitch
sudo apt-get install usb-modeswitch-data
you can install them by using GUI synaptic if it is more convenient. after installation of the two packages above pls reboot pc. hopefully an icon will appear on the desktop; pls tell me if that's the case with this modem (for other #G modems it happens).
we'll continue after I see the output of lsusb cmd and answers to the questions.
|
Revision history for this message
|
#16 |
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 413c:02b0 Dell Computer Corp.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c05a Logitech, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. Mass Storage Device
Bus 001 Device 002: ID 064e:a129 Suyin Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
|
Revision history for this message
|
#17 |
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 413c:02b0 Dell Computer Corp.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 1199:68a3 Sierra Wireless, Inc.
Bus 001 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. Mass Storage Device
Bus 001 Device 002: ID 064e:a129 Suyin Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
|
Revision history for this message
|
#18 |
Also Pete u told me that I can install the packages by using the GUI synaptic I dont understand how to do that so if u can, can u explain more to me I really do appreaciate it soooo much. Thanks
|
Revision history for this message
|
#19 |
ok, here we go about GUI synaptic
first, System-
second, synaptic opens; go to Search button and left click on it - new window opens
third, enter in our case
usb-modeswitch
let synaptic search its db , when finished on the left panel will be displayed the package that you searched for and on the right panel you'll see the two packages mentioned
usb-modeswitch
usb-modeswitch-data
pls highlight the first one usb-modeswitch and right click on it; select Mark for installation option then press on Apply button
accept the choice presented on the new window opened (in this case both packages are automatically selected for install)
then select OK and the install process begins; let it finish; when finished just close synaptic and reboot with ID 1199:68a3 Sierra Wireless, Inc. device plugged in.
btw, did you already install the 2 packages using CLI ? if yes, do you see an icon on the desktop pls ? if not (you prefer GUI method) pls let me know after the packages were installed. we'll continue after that. TU.
|
Revision history for this message
|
#20 |
Hi Peter can u decribe the icon to me that suppose to me in the panel after I download the packages.
Also I have install the packages and reboot but no packages icon shows up on my desktop
|
Revision history for this message
|
#21 |
ok, that's fine, we'll approach it differently.
please go System-
if yes highlight it, on the right panel you should see an entry under Device:
what is that entry ? copy/paste it here if it is there. TU.
|
Revision history for this message
|
#22 |
Ok under Peripheral Devices:
USB. FireWire an_her peripherals
Generic- Multi-Card
Thats all it have under the Periherals Devices
Don't C anything else. TU
|
Revision history for this message
|
#23 |
Also peter when I restarted my laptop it auto connected to the wireless bout 30 seconds and disconnected on its on and asked me for the password again thats the first time it has done this
|
Revision history for this message
|
#24 |
did you highlight the
USB. FireWire an_her peripherals
as stated under your post and open it ? pls do that and tell me what do you see on the right panel under Device: ?
|
Revision history for this message
|
#25 |
pls do the same for the other entry mentioned in your post
Generic- Multi-Card
highlight it , open it and tell me what you see on the right panel under Device:
TU.
|
Revision history for this message
|
#26 |
also pls copy/paste here output of the following command
lsusb -v -d 1199:68a3
|
Revision history for this message
|
#27 |
Hi Peter I did want u asked and both items r blank under device. There is no info under it.
Bus 001 Device 007: ID 1199:68a3 Sierra Wireless, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1199 Sierra Wireless, Inc.
idProduct 0x68a3
bcdDevice 0.06
iManufacturer 2
iProduct 1
iSerial 3
bNumConfigura
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 133
bNumInterfaces 4
bConfigurat
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 3
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Interrupt
Synch Type None
Usage Type Data
bInterval 5
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 0
bInterfac
bInterfac
bInterfac
iInterface 0
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 2
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 0
bInterfac
bInterfac
bInterfac
iInterface 0
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 2
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 3
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Interrupt
Synch Type None
Usage Type Data
bInterval 5
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
|
Revision history for this message
|
#28 |
Hi Peter for some reason Pete I coundnt copy/paste the info for the Peripheral Devices:
But when I highlighted it the right side panel has this info:
Vendor: -
Model: -
Revision: -
Driver: -
Fabric: -
Number of ports -
Under the Generic - Multi-Card:
Device says: /dev/sdb
Bus 001 Device 007: ID 1199:68a3 Sierra Wireless, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1199 Sierra Wireless, Inc.
idProduct 0x68a3
bcdDevice 0.06
iManufacturer 2
iProduct 1
iSerial 3
bNumConfigura
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 133
bNumInterfaces 4
bConfigurat
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 3
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Interrupt
Synch Type None
Usage Type Data
bInterval 5
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 0
bInterfac
bInterfac
bInterfac
iInterface 0
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 2
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 0
bInterfac
bInterfac
bInterfac
iInterface 0
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 2
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 3
bInterfac
bInterfac
bInterfac
iInterface 0
Endpoint Descriptor:
bLength 7
Transfer Type Interrupt
Synch Type None
Usage Type Data
bInterval 5
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
Endpoint Descriptor:
bLength 7
Transfer Type Bulk
Synch Type None
Usage Type Data
bInterval 32
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
|
Revision history for this message
|
#29 |
I couldn't find an answer to my post that reads
.....'did you highlight the
USB. FireWire an_her peripherals
as stated under your post and open it ? pls do that and tell me what do you see on the right panel under Device: ?',,,,
would you pls make sure that I could see it ? what I'm interested on is what entry is in the Device: on the right panel. TU,
ps, I'm not interested AT ALL on any ....'for some reason Pete I coundnt copy/paste the info for the Peripheral Devices:',,, I'm interested on WHAT'S UNDER Peripheral Devices as stated above and previously namely
USB. FireWire an_her peripherals
|
Revision history for this message
|
#30 |
Therese, yes, you're absolutely right, under Peripheral Devices heading and part of it in v small letters there is USB. FireWire an_her peripherals as explanation what the heading contains; I just noticed that today when I opened it; the subheadings contain the devices not the heading. I'm sorry for the rant, pls accept my apologies; it was uncalled for and rude.
it appears that the AT&T USBConnect Lighting Laptopconnect card acts as a modem, it was switched already, your ....'and asked me for the password again thats the first time it has done this'.... or in other words it tried and connected to your ISP 3G network.
however, based on your initial/opening post ....'Ii have a comcast netgear router.'..... up to a certain point in this thread (before I was aware that we're dealing also with a 3G mobile wifi through the AT&T USBConnect Lighting Laptopconnect card) we made an interface config file based on it where connect automatically option was enabled. I'd recommend/pls do it, edit that config file by removing the check mark under that option or outright delete/remove the file; it may interfere with the the 3G mobile connection.
|
Revision history for this message
|
#31 |
Hi Pete I never thought that u were being rude so no apologies r necessary, but I just need for u to b a lil patient with me if I have alot of ?'s cause I'm so new to this so when u tell me to do certain things that I dont know how to do I will asked u so i won't do anything wrong.
Now can u explain more on how to edit the config file by removing the check mark as stated above.
I really appreciate it.
|
Revision history for this message
|
#32 |
ok, thanks. here we go re ...'edit the config file by removing the check mark as stated above.'...
it's basically the reverse of the procedure we used before when it was created. I'll cite below that procedure (you can find it above on past posts) except that this time we'll edit it
....'on the desktop upper panel on the right hand side of it, somewhere close to the sound applet there should be the networking applet. if you left click on it you should see the two SSID's above listed if wireless networks is enabled (see below).
if you right click on it you can enable wireless networks and can Edit Connections.... so, pls enable wireless if not done yet and open Edit Connections.....
- left click on the Wireless tab;'........
AT THIS POINT you should see the connection NAME that we created. HIGHLIGHT it and press Edit button on the right. a new window opens where you'll see one of the 2 SSID that were entered when conn'n created and just above there is a BOX with Connect automatically besides.
AT THIS POINT please UNCHECK Connect automatically box; after check mark removed
........(these are the steps required to create the connection - they were omitted because are not applicable)
.....'- click Apply then OK'.....
btw, what do you see when you left click on the desktop upper panel on the right hand side of it, somewhere close to the sound applet, on the networking applet. ?
Can you help with this problem?
Provide an answer of your own, or ask Therese Dones for more information if necessary.
