Wireless, Wimax on Dell inspiron mini

Asked by Satyam Kaneria

Hi,

I am having trouble getting my Wireless and Wimax/4g (Clear) to work on my Dell Inspiron mini netbook. I have installed Ubuntu netbook edition and have done the package update and checked for any available proprietory drivers for wireless via ethernet.

And i tried searching for drivers or a way to get wimax/ 4g to work. But i dont know if it is even possible at this point of time.

Thanks

Question information

Language:
English Edit question
Status:
Answered
For:
Ubuntu gnome-nettool Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
marcobra (Marco Braida) (marcobra) said :
#1

Please first connect your network card to the wireless router using an ethernet cable (also known as a LAN cable).

In order to gather essential troubleshooting information about your wireless card, please follow this procedure:

Step 1: Open Terminal from "Applications->Accessories->Terminal"

Step 2: Please copy-paste the following command from the https://answers.launchpad.net/ubuntu website in Firefox into the Linux Terminal. Do NOT copy-paste from the Email message into the Terminal, as that will only copy PART of the command. The command STARTS with the word sudo and ENDS with the word restart. So please copy-paste the ENTIRE command below from Firefox into a Terminal, press <enter>, then enter password when sudo asks for password, then press enter again.

Tip: If you have a wheel mouse or 3 button mouse you do not need to type commands into the Terminal. Highlight the command written on the page. Move your cursor anywhere in the Terminal and press the wheel or middle button. Automatic Copy and paste! No spelling mistakes! No Typos! No other errors!

sudo aptitude update; sudo aptitude install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; sudo lshw -short; uname -a; dmesg | egrep 'ound|irmware|eth|ath|wl|ipw|b43|witch|ndiswrapper'; iwconfig; grep b43 /etc/modprobe.d/*; grep wl /etc/modprobe.d/*; sudo hwinfo --netcard ; sudo /etc/init.d/networking restart

Step 3: Please post results (copy/paste terminal output) on this thread. The troubleshooters here need to see the full Terminal output from running the above command.

Revision history for this message
Satyam Kaneria (satyamkaneria) said :
#2

Hi there,

Alright, so below are the results of executing the command.

[sudo] password for satyam:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Initializing package states... Done
Writing extended state information... Done
The following NEW packages will be installed:
  hwinfo libhd16{a}
0 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 744kB of archives. After unpacking 2,060kB will be used.
Do you want to continue? [Y/n/?] y
Writing extended state information... Done
Get:1 http://us.archive.ubuntu.com/ubuntu/ lucid/universe libhd16 16.0-2
[698kB]
Get:2 http://us.archive.ubuntu.com/ubuntu/ lucid/universe hwinfo 16.0-2
[46.1kB]
Fetched 744kB in 1s (492kB/s)
Selecting previously deselected package libhd16.
(Reading database ... 143826 files and directories currently installed.)
Unpacking libhd16 (from .../libhd16_16.0-2_i386.deb) ...
Selecting previously deselected package hwinfo.
Unpacking hwinfo (from .../hwinfo_16.0-2_i386.deb) ...
Processing triggers for man-db ...
Setting up libhd16 (16.0-2) ...

Setting up hwinfo (16.0-2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
Writing extended state information... Done

Hardware Lister (lshw) - B.02.14
usage: lshw [-format] [-options ...]
       lshw -version

    -version print program version (B.02.14)

format can be
    -html output hardware tree as HTML
    -xml output hardware tree as XML
    -short output hardware paths
    -businfo output bus information

options can be
    -class CLASS only show a certain class of hardware
    -C CLASS same as '-class CLASS'
    -c CLASS same as '-class CLASS'
    -disable TEST disable a test (like pci, isapnp, cpuid, etc. )
    -enable TEST enable a test (like pci, isapnp, cpuid, etc. )
    -quiet don't display status
    -sanitize sanitize output (remove sensitive information like
serial numbers, etc.)
    -numeric output numeric IDs (for PCI, USB, etc.)

./tmp: line 2: network: command not found
0: dell-wifi: Wireless LAN
    Soft blocked: no
    Hard blocked: no
1: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

wlan0 Interface doesn't support scanning : Network is down

auto lo
iface lo inet loopback

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=10.04
DISTRIB_CODENAME=lucid
DISTRIB_DESCRIPTION="Ubuntu 10.04 LTS"
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge
[8086:a010]
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family
Integrated Graphics Controller [8086:a011]
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated
Graphics Controller [8086:a012]
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High
Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express
Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express
Port 2 [8086:27d2] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH7 Family USB UHCI
Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller
[8086:27bc] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI
Controller [8086:27c1] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
[8086:27da] (rev 02)
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
07:00.0 Network controller [0280]: Intel Corporation WiMAX/WiFi Link 6050
Series [8086:0087] (rev 35)
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. Mass Storage
Device
Bus 001 Device 003: ID 8086:0188 Intel Corp.
Bus 001 Device 002: ID 064e:8101 Suyin Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
H/W path Device Class Description
=========================================================
                                  system Inspiron 1012
/0 bus Motherboard
/0/1 memory 103KiB BIOS
/0/3 bus 0P9MDV
/0/5 processor Intel(R) Atom(TM) CPU N450 @
1.66GHz
/0/5/6 memory 16KiB L1 cache
/0/5/7 memory 512KiB L2 cache
/0/5/1.1 processor Logical CPU
/0/5/1.2 processor Logical CPU
/0/12 memory 1GiB System Memory
/0/12/0 memory 1GiB SODIMM DDR2 Synchronous
667 MHz (1.5 ns)
/0/100 bridge N10 Family DMI Bridge
/0/100/2 display N10 Family Integrated Graphics
Controller
/0/100/2.1 display N10 Family Integrated Graphics
Controller
/0/100/1b multimedia N10/ICH 7 Family High
Definition Audio Controller
/0/100/1c bridge N10/ICH 7 Family PCI Express
Port 1
/0/100/1c/0 eth0 network RTL8101E/RTL8102E PCI Express
Fast Ethernet controller
/0/100/1c.1 bridge N10/ICH 7 Family PCI Express
Port 2
/0/100/1c.1/0 wlan0 network WiMAX/WiFi Link 6050 Series
/0/100/1d bus N10/ICH7 Family USB UHCI
Controller #1
/0/100/1d.1 bus N10/ICH 7 Family USB UHCI
Controller #2
/0/100/1d.2 bus N10/ICH 7 Family USB UHCI
Controller #3
/0/100/1d.3 bus N10/ICH 7 Family USB UHCI
Controller #4
/0/100/1d.7 bus N10/ICH 7 Family USB2 EHCI
Controller
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1f bridge NM10 Family LPC Controller
/0/100/1f.2 scsi0 storage N10/ICH7 Family SATA AHCI
Controller
/0/100/1f.2/0.0.0 /dev/sda disk 250GB ST9250315AS
/0/100/1f.2/0.0.0/1 /dev/sda1 volume 39MiB Windows FAT volume
/0/100/1f.2/0.0.0/2 /dev/sda2 volume 14GiB Windows NTFS volume
/0/100/1f.2/0.0.0/3 /dev/sda3 volume 161GiB Windows NTFS volume
/0/100/1f.2/0.0.0/4 /dev/sda4 volume 56GiB Extended partition
/0/100/1f.2/0.0.0/4/5 /dev/sda5 volume 54GiB Linux filesystem
partition
/0/100/1f.2/0.0.0/4/6 /dev/sda6 volume 2402MiB Linux swap / Solaris
partition
/0/100/1f.3 bus N10/ICH 7 Family SMBus
Controller
/0/0 scsi4 storage
/0/0/0.0.0 /dev/sdb disk SCSI Disk
/1 power SmartBattery
/2 system
Linux satyam-laptop 2.6.32-23-generic #37-Ubuntu SMP Fri Jun 11 07:54:58 UTC
2010 i686 GNU/Linux
[ 0.000000] found SMP MP-table at [c00f7bf0] f7bf0
[ 0.251692] ACPI: No dock devices found.
[ 0.254564] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0._OSC] (Node f7010e88), AE_ALREADY_EXISTS
[ 0.254584] ACPI: Marking method _OSC as Serialized because of
AE_ALREADY_EXISTS error
[ 0.259135] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0._OSC] (Node f7010e88), AE_ALREADY_EXISTS
[ 0.284532] Switching to clocksource tsc
[ 0.311813] pnp: PnP ACPI: found 8 devices
[ 0.382287] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0._OSC] (Node f7010e88), AE_ALREADY_EXISTS
[ 0.382657] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0._OSC] (Node f7010e88), AE_ALREADY_EXISTS
[ 0.383047] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0._OSC] (Node f7010e88), AE_ALREADY_EXISTS
[ 0.383379] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0._OSC] (Node f7010e88), AE_ALREADY_EXISTS
[ 0.384272] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input0
[ 0.384371] ACPI: Lid Switch [LID0]
[ 0.397387] Switching to clocksource hpet
[ 0.435252] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.453731] hub 1-0:1.0: USB hub found
[ 0.454548] hub 2-0:1.0: USB hub found
[ 0.455194] hub 3-0:1.0: USB hub found
[ 0.455831] hub 4-0:1.0: USB hub found
[ 0.456428] hub 5-0:1.0: USB hub found
[ 0.517083] device-mapper: multipath: version 1.1.0 loaded
[ 0.517099] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.531783] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.794832] isapnp: No Plug & Play device found
[ 1.122959] eth0: RTL8102e at 0xf805e000, 00:26:b9:c6:68:60, XID 04e00000
IRQ 26
[ 1.474457] usb-storage: device found at 4
[ 9.550325] lp: driver loaded but no devices found
[ 10.604492] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M
(064e:8101)
[ 10.610345] dell-wmi: No known WMI GUID found
[ 10.806824] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux,
1.3.27k
[ 10.806834] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 10.806996] iwlagn 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ
17
[ 10.807043] iwlagn 0000:07:00.0: setting latency timer to 64
[ 10.807143] iwlagn 0000:07:00.0: Detected Intel Wireless WiFi Link 6050
Series 2x2 AGN REV=0x84
[ 10.829747] iwlagn 0000:07:00.0: Tunable channels: 13 802.11bg, 24
802.11a channels
[ 10.829905] iwlagn 0000:07:00.0: irq 29 for MSI/MSI-X
[ 11.120063] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 11.310461] r8169: eth0: link up
[ 11.310474] r8169: eth0: link up
[ 11.346284] iwlagn 0000:07:00.0: firmware: requesting
iwlwifi-6050-4.ucode
[ 11.427847] iwlagn 0000:07:00.0: iwlwifi-6050-4.ucode firmware file req
failed: -2
[ 11.427859] iwlagn 0000:07:00.0: firmware: requesting
iwlwifi-6050-3.ucode
[ 11.455267] iwlagn 0000:07:00.0: iwlwifi-6050-3.ucode firmware file req
failed: -2
[ 11.455278] iwlagn 0000:07:00.0: firmware: requesting
iwlwifi-6050-2.ucode
[ 11.472316] iwlagn 0000:07:00.0: iwlwifi-6050-2.ucode firmware file req
failed: -2
[ 11.472326] iwlagn 0000:07:00.0: firmware: requesting
iwlwifi-6050-1.ucode
[ 11.509247] iwlagn 0000:07:00.0: iwlwifi-6050-1.ucode firmware file req
failed: -2
[ 11.509255] iwlagn 0000:07:00.0: Could not read microcode: -2
[ 11.692518] Console: switching to colour frame buffer device 128x37
[ 11.707350] iwlagn 0000:07:00.0: firmware: requesting
iwlwifi-6050-4.ucode
[ 11.721711] iwlagn 0000:07:00.0: iwlwifi-6050-4.ucode firmware file req
failed: -2
[ 11.721914] iwlagn 0000:07:00.0: firmware: requesting
iwlwifi-6050-3.ucode
[ 11.738299] iwlagn 0000:07:00.0: iwlwifi-6050-3.ucode firmware file req
failed: -2
[ 11.738490] iwlagn 0000:07:00.0: firmware: requesting
iwlwifi-6050-2.ucode
[ 11.750038] iwlagn 0000:07:00.0: iwlwifi-6050-2.ucode firmware file req
failed: -2
[ 11.750230] iwlagn 0000:07:00.0: firmware: requesting
iwlwifi-6050-1.ucode
[ 11.871933] iwlagn 0000:07:00.0: iwlwifi-6050-1.ucode firmware file req
failed: -2
[ 11.871942] iwlagn 0000:07:00.0: Could not read microcode: -2
[ 21.412054] eth0: no IPv6 routers present
lo no wireless extensions.

eth0 no wireless extensions.

wlan0 IEEE 802.11abgn ESSID:off/any
          Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm
          Retry long limit:7 RTS thr:off Fragment thr:off
          Power Management:off

/etc/modprobe.d/blacklist-bcm43.conf:blacklist b43
/etc/modprobe.d/blacklist-bcm43.conf:blacklist b43legacy
/etc/modprobe.d/blacklist.conf:# replaced by b43 and ssb.
/etc/modprobe.d/blacklist-bcm43.conf:# Warning: This file is autogenerated
by bcmwl. All changes to this file will be lost.
/etc/modprobe.d/blacklist-watchdog.conf:blacklist twl4030_wdt
usage: sudo -h | -K | -k | -L | -V
usage: sudo -v [-AknS] [-p prompt]
usage: sudo -l[l] [-AknS] [-g groupname|#gid] [-p prompt] [-U username] [-u
username|#uid] [-g groupname|#gid] [command]
usage: sudo [-AbEHknPS] [-C fd] [-g groupname|#gid] [-p prompt] [-u
username|#uid] [-g groupname|#gid] [VAR=value] [-i|-s]
            [<command>]
usage: sudo -e [-AknS] [-C fd] [-g groupname|#gid] [-p prompt] [-u
username|#uid] file ...
> hal.1: read hal dataprocess 1716: arguments to dbus_move_error() were
incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed
in file dbus-errors.c line 278.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name
org.freedesktop.Hal was not provided by any .service files
22: PCI 500.0: 0200 Ethernet controller
  [Created at pci.318]
  Unique ID: rBUF.PUSqd7FTkGD
  Parent ID: z8Q3.ZbAWgKMCoE3
  SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:05:00.0
  SysFS BusID: 0000:05:00.0
  Hardware Class: network
  Model: "Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0x8136 "RTL8101E/RTL8102E PCI Express Fast Ethernet
controller"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x041a
  Revision: 0x02
  Driver: "r8169"
  Driver Modules: "r8169"
  Device File: eth0
  I/O Ports: 0x2000-0x2fff (rw)
  Memory Range: 0xf0f20000-0xf0f20fff (rw,prefetchable)
  Memory Range: 0xf0f10000-0xf0f1ffff (rw,prefetchable)
  Memory Range: 0xf0f40000-0xf0f5ffff (ro,prefetchable,disabled)
  IRQ: 26 (11172 events)
  HW Address: 00:26:b9:c6:68:60
  Link detected: yes
  Module Alias: "pci:v000010ECd00008136sv00001028sd0000041Abc02sc00i00"
  Driver Info #0:
    Driver Status: r8169 is active
    Driver Activation Cmd: "modprobe r8169"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #11 (PCI bridge)

23: PCI 700.0: 0282 WLAN controller
  [Created at pci.318]
  Unique ID: y9sn.SvWCYSLpal0
  Parent ID: qTvu.bQ30eTbcr+3
  SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:07:00.0
  SysFS BusID: 0000:07:00.0
  Hardware Class: network
  Model: "Intel WLAN controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x0087
  SubVendor: pci 0x8086 "Intel Corporation"
  SubDevice: pci 0x1321
  Revision: 0x35
  Driver: "iwlagn"
  Driver Modules: "iwlagn"
  Device File: wlan0
  Features: WLAN
  Memory Range: 0xf0100000-0xf0101fff (rw,non-prefetchable)
  IRQ: 29 (no events)
  HW Address: 00:23:15:29:02:30
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100
104 108 112 116 120 124 128 132 136 140
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452
2.457 2.462 2.467 2.472 5.18 5.2 5.22 5.24 5.26 5.28 5.3 5.32 5.5 5.52 5.54
5.56 5.58 5.6 5.62 5.64 5.66 5.68 5.7
  WLAN encryption modes: WEP40 WEP104 TKIP CCMP
  WLAN authentication modes: open sharedkey wpa-psk wpa-eap
  Module Alias: "pci:v00008086d00000087sv00008086sd00001321bc02sc80i00"
  Driver Info #0:
    Driver Status: iwlagn is active
    Driver Activation Cmd: "modprobe iwlagn"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #12 (PCI bridge)
 * Reconfiguring network
interfaces...
Ignoring unknown interface eth0=eth0.

[ OK ]
satyam@satyam-laptop:~$

On Fri, Jul 16, 2010 at 11:05 AM, marcobra (Marco Braida) <
<email address hidden>> wrote:

> Your question #117963 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/117963
>
> Status: Open => Needs information
>
> marcobra (Marco Braida) requested for more information:
> Please first connect your network card to the wireless router using an
> ethernet cable (also known as a LAN cable).
>
> In order to gather essential troubleshooting information about your
> wireless card, please follow this procedure:
>
> Step 1: Open Terminal from "Applications->Accessories->Terminal"
>
> Step 2: Please copy-paste the following command from the
> https://answers.launchpad.net/ubuntu website in Firefox into the Linux
> Terminal. Do NOT copy-paste from the Email message into the Terminal, as
> that will only copy PART of the command. The command STARTS with the
> word sudo and ENDS with the word restart. So please copy-paste the
> ENTIRE command below from Firefox into a Terminal, press <enter>, then
> enter password when sudo asks for password, then press enter again.
>
> Tip: If you have a wheel mouse or 3 button mouse you do not need to type
> commands into the Terminal. Highlight the command written on the page.
> Move your cursor anywhere in the Terminal and press the wheel or middle
> button. Automatic Copy and paste! No spelling mistakes! No Typos! No
> other errors!
>
> sudo aptitude update; sudo aptitude install hwinfo grep; sudo lshw -C
> network; rfkill list; sudo iwlist scanning; cat /etc/network/interfaces;
> cat /etc/lsb-release; lspci -nn; lsusb; sudo lshw -short; uname -a;
> dmesg | egrep 'ound|irmware|eth|ath|wl|ipw|b43|witch|ndiswrapper';
> iwconfig; grep b43 /etc/modprobe.d/*; grep wl /etc/modprobe.d/*; sudo
> hwinfo --netcard ; sudo /etc/init.d/networking restart
>
> Step 3: Please post results (copy/paste terminal output) on this thread.
> The troubleshooters here need to see the full Terminal output from
> running the above command.
>
> --
> To answer this request for more information, you can either reply to
> this email or enter your reply at the following page:
> https://answers.launchpad.net/ubuntu/+question/117963
>
> You received this question notification because you are a direct
> subscriber of the question.
>

Revision history for this message
Satyam Kaneria (satyamkaneria) said :
#3

Hi,

Below is the result of executing the above command.

[sudo] password for satyam:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Initializing package states... Done
Writing extended state information... Done
The following NEW packages will be installed:
  hwinfo libhd16{a}
0 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 744kB of archives. After unpacking 2,060kB will be used.
Do you want to continue? [Y/n/?] y
Writing extended state information... Done
Get:1 http://us.archive.ubuntu.com/ubuntu/ lucid/universe libhd16 16.0-2 [698kB]
Get:2 http://us.archive.ubuntu.com/ubuntu/ lucid/universe hwinfo 16.0-2 [46.1kB]
Fetched 744kB in 1s (492kB/s)
Selecting previously deselected package libhd16.
(Reading database ... 143826 files and directories currently installed.)
Unpacking libhd16 (from .../libhd16_16.0-2_i386.deb) ...
Selecting previously deselected package hwinfo.
Unpacking hwinfo (from .../hwinfo_16.0-2_i386.deb) ...
Processing triggers for man-db ...
Setting up libhd16 (16.0-2) ...

Setting up hwinfo (16.0-2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
Writing extended state information... Done

Hardware Lister (lshw) - B.02.14
usage: lshw [-format] [-options ...]
       lshw -version

 -version print program version (B.02.14)

format can be
 -html output hardware tree as HTML
 -xml output hardware tree as XML
 -short output hardware paths
 -businfo output bus information

options can be
 -class CLASS only show a certain class of hardware
 -C CLASS same as '-class CLASS'
 -c CLASS same as '-class CLASS'
 -disable TEST disable a test (like pci, isapnp, cpuid, etc. )
 -enable TEST enable a test (like pci, isapnp, cpuid, etc. )
 -quiet don't display status
 -sanitize sanitize output (remove sensitive information like serial numbers, etc.)
 -numeric output numeric IDs (for PCI, USB, etc.)

./tmp: line 2: network: command not found
0: dell-wifi: Wireless LAN
 Soft blocked: no
 Hard blocked: no
1: phy0: Wireless LAN
 Soft blocked: no
 Hard blocked: no
lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

wlan0 Interface doesn't support scanning : Network is down

auto lo
iface lo inet loopback

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=10.04
DISTRIB_CODENAME=lucid
DISTRIB_DESCRIPTION="Ubuntu 10.04 LTS"
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010]
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011]
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012]
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
07:00.0 Network controller [0280]: Intel Corporation WiMAX/WiFi Link 6050 Series [8086:0087] (rev 35)
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. Mass Storage Device
Bus 001 Device 003: ID 8086:0188 Intel Corp.
Bus 001 Device 002: ID 064e:8101 Suyin Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
H/W path Device Class Description
=========================================================
                                  system Inspiron 1012
/0 bus Motherboard
/0/1 memory 103KiB BIOS
/0/3 bus 0P9MDV
/0/5 processor Intel(R) Atom(TM) CPU N450 @ 1.66GHz
/0/5/6 memory 16KiB L1 cache
/0/5/7 memory 512KiB L2 cache
/0/5/1.1 processor Logical CPU
/0/5/1.2 processor Logical CPU
/0/12 memory 1GiB System Memory
/0/12/0 memory 1GiB SODIMM DDR2 Synchronous 667 MHz (1.5 ns)
/0/100 bridge N10 Family DMI Bridge
/0/100/2 display N10 Family Integrated Graphics Controller
/0/100/2.1 display N10 Family Integrated Graphics Controller
/0/100/1b multimedia N10/ICH 7 Family High Definition Audio Controller
/0/100/1c bridge N10/ICH 7 Family PCI Express Port 1
/0/100/1c/0 eth0 network RTL8101E/RTL8102E PCI Express Fast Ethernet controller
/0/100/1c.1 bridge N10/ICH 7 Family PCI Express Port 2
/0/100/1c.1/0 wlan0 network WiMAX/WiFi Link 6050 Series
/0/100/1d bus N10/ICH7 Family USB UHCI Controller #1
/0/100/1d.1 bus N10/ICH 7 Family USB UHCI Controller #2
/0/100/1d.2 bus N10/ICH 7 Family USB UHCI Controller #3
/0/100/1d.3 bus N10/ICH 7 Family USB UHCI Controller #4
/0/100/1d.7 bus N10/ICH 7 Family USB2 EHCI Controller
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1f bridge NM10 Family LPC Controller
/0/100/1f.2 scsi0 storage N10/ICH7 Family SATA AHCI Controller
/0/100/1f.2/0.0.0 /dev/sda disk 250GB ST9250315AS
/0/100/1f.2/0.0.0/1 /dev/sda1 volume 39MiB Windows FAT volume
/0/100/1f.2/0.0.0/2 /dev/sda2 volume 14GiB Windows NTFS volume
/0/100/1f.2/0.0.0/3 /dev/sda3 volume 161GiB Windows NTFS volume
/0/100/1f.2/0.0.0/4 /dev/sda4 volume 56GiB Extended partition
/0/100/1f.2/0.0.0/4/5 /dev/sda5 volume 54GiB Linux filesystem partition
/0/100/1f.2/0.0.0/4/6 /dev/sda6 volume 2402MiB Linux swap / Solaris partition
/0/100/1f.3 bus N10/ICH 7 Family SMBus Controller
/0/0 scsi4 storage
/0/0/0.0.0 /dev/sdb disk SCSI Disk
/1 power SmartBattery
/2 system
Linux satyam-laptop 2.6.32-23-generic #37-Ubuntu SMP Fri Jun 11 07:54:58 UTC 2010 i686 GNU/Linux
[ 0.000000] found SMP MP-table at [c00f7bf0] f7bf0
[ 0.251692] ACPI: No dock devices found.
[ 0.254564] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7010e88), AE_ALREADY_EXISTS
[ 0.254584] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.259135] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7010e88), AE_ALREADY_EXISTS
[ 0.284532] Switching to clocksource tsc
[ 0.311813] pnp: PnP ACPI: found 8 devices
[ 0.382287] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7010e88), AE_ALREADY_EXISTS
[ 0.382657] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7010e88), AE_ALREADY_EXISTS
[ 0.383047] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7010e88), AE_ALREADY_EXISTS
[ 0.383379] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7010e88), AE_ALREADY_EXISTS
[ 0.384272] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input0
[ 0.384371] ACPI: Lid Switch [LID0]
[ 0.397387] Switching to clocksource hpet
[ 0.435252] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.453731] hub 1-0:1.0: USB hub found
[ 0.454548] hub 2-0:1.0: USB hub found
[ 0.455194] hub 3-0:1.0: USB hub found
[ 0.455831] hub 4-0:1.0: USB hub found
[ 0.456428] hub 5-0:1.0: USB hub found
[ 0.517083] device-mapper: multipath: version 1.1.0 loaded
[ 0.517099] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.531783] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.794832] isapnp: No Plug & Play device found
[ 1.122959] eth0: RTL8102e at 0xf805e000, 00:26:b9:c6:68:60, XID 04e00000 IRQ 26
[ 1.474457] usb-storage: device found at 4
[ 9.550325] lp: driver loaded but no devices found
[ 10.604492] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (064e:8101)
[ 10.610345] dell-wmi: No known WMI GUID found
[ 10.806824] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[ 10.806834] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 10.806996] iwlagn 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.807043] iwlagn 0000:07:00.0: setting latency timer to 64
[ 10.807143] iwlagn 0000:07:00.0: Detected Intel Wireless WiFi Link 6050 Series 2x2 AGN REV=0x84
[ 10.829747] iwlagn 0000:07:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 10.829905] iwlagn 0000:07:00.0: irq 29 for MSI/MSI-X
[ 11.120063] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 11.310461] r8169: eth0: link up
[ 11.310474] r8169: eth0: link up
[ 11.346284] iwlagn 0000:07:00.0: firmware: requesting iwlwifi-6050-4.ucode
[ 11.427847] iwlagn 0000:07:00.0: iwlwifi-6050-4.ucode firmware file req failed: -2
[ 11.427859] iwlagn 0000:07:00.0: firmware: requesting iwlwifi-6050-3.ucode
[ 11.455267] iwlagn 0000:07:00.0: iwlwifi-6050-3.ucode firmware file req failed: -2
[ 11.455278] iwlagn 0000:07:00.0: firmware: requesting iwlwifi-6050-2.ucode
[ 11.472316] iwlagn 0000:07:00.0: iwlwifi-6050-2.ucode firmware file req failed: -2
[ 11.472326] iwlagn 0000:07:00.0: firmware: requesting iwlwifi-6050-1.ucode
[ 11.509247] iwlagn 0000:07:00.0: iwlwifi-6050-1.ucode firmware file req failed: -2
[ 11.509255] iwlagn 0000:07:00.0: Could not read microcode: -2
[ 11.692518] Console: switching to colour frame buffer device 128x37
[ 11.707350] iwlagn 0000:07:00.0: firmware: requesting iwlwifi-6050-4.ucode
[ 11.721711] iwlagn 0000:07:00.0: iwlwifi-6050-4.ucode firmware file req failed: -2
[ 11.721914] iwlagn 0000:07:00.0: firmware: requesting iwlwifi-6050-3.ucode
[ 11.738299] iwlagn 0000:07:00.0: iwlwifi-6050-3.ucode firmware file req failed: -2
[ 11.738490] iwlagn 0000:07:00.0: firmware: requesting iwlwifi-6050-2.ucode
[ 11.750038] iwlagn 0000:07:00.0: iwlwifi-6050-2.ucode firmware file req failed: -2
[ 11.750230] iwlagn 0000:07:00.0: firmware: requesting iwlwifi-6050-1.ucode
[ 11.871933] iwlagn 0000:07:00.0: iwlwifi-6050-1.ucode firmware file req failed: -2
[ 11.871942] iwlagn 0000:07:00.0: Could not read microcode: -2
[ 21.412054] eth0: no IPv6 routers present
lo no wireless extensions.

eth0 no wireless extensions.

wlan0 IEEE 802.11abgn ESSID:off/any
          Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm
          Retry long limit:7 RTS thr:off Fragment thr:off
          Power Management:off

/etc/modprobe.d/blacklist-bcm43.conf:blacklist b43
/etc/modprobe.d/blacklist-bcm43.conf:blacklist b43legacy
/etc/modprobe.d/blacklist.conf:# replaced by b43 and ssb.
/etc/modprobe.d/blacklist-bcm43.conf:# Warning: This file is autogenerated by bcmwl. All changes to this file will be lost.
/etc/modprobe.d/blacklist-watchdog.conf:blacklist twl4030_wdt
usage: sudo -h | -K | -k | -L | -V
usage: sudo -v [-AknS] [-p prompt]
usage: sudo -l[l] [-AknS] [-g groupname|#gid] [-p prompt] [-U username] [-u username|#uid] [-g groupname|#gid] [command]
usage: sudo [-AbEHknPS] [-C fd] [-g groupname|#gid] [-p prompt] [-u username|#uid] [-g groupname|#gid] [VAR=value] [-i|-s]
            [<command>]
usage: sudo -e [-AknS] [-C fd] [-g groupname|#gid] [-p prompt] [-u username|#uid] file ...
> hal.1: read hal dataprocess 1716: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 278.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
22: PCI 500.0: 0200 Ethernet controller
  [Created at pci.318]
  Unique ID: rBUF.PUSqd7FTkGD
  Parent ID: z8Q3.ZbAWgKMCoE3
  SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:05:00.0
  SysFS BusID: 0000:05:00.0
  Hardware Class: network
  Model: "Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0x8136 "RTL8101E/RTL8102E PCI Express Fast Ethernet controller"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x041a
  Revision: 0x02
  Driver: "r8169"
  Driver Modules: "r8169"
  Device File: eth0
  I/O Ports: 0x2000-0x2fff (rw)
  Memory Range: 0xf0f20000-0xf0f20fff (rw,prefetchable)
  Memory Range: 0xf0f10000-0xf0f1ffff (rw,prefetchable)
  Memory Range: 0xf0f40000-0xf0f5ffff (ro,prefetchable,disabled)
  IRQ: 26 (11172 events)
  HW Address: 00:26:b9:c6:68:60
  Link detected: yes
  Module Alias: "pci:v000010ECd00008136sv00001028sd0000041Abc02sc00i00"
  Driver Info #0:
    Driver Status: r8169 is active
    Driver Activation Cmd: "modprobe r8169"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #11 (PCI bridge)

23: PCI 700.0: 0282 WLAN controller
  [Created at pci.318]
  Unique ID: y9sn.SvWCYSLpal0
  Parent ID: qTvu.bQ30eTbcr+3
  SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:07:00.0
  SysFS BusID: 0000:07:00.0
  Hardware Class: network
  Model: "Intel WLAN controller"
  Vendor: pci 0x8086 "Intel Corporation"
  Device: pci 0x0087
  SubVendor: pci 0x8086 "Intel Corporation"
  SubDevice: pci 0x1321
  Revision: 0x35
  Driver: "iwlagn"
  Driver Modules: "iwlagn"
  Device File: wlan0
  Features: WLAN
  Memory Range: 0xf0100000-0xf0101fff (rw,non-prefetchable)
  IRQ: 29 (no events)
  HW Address: 00:23:15:29:02:30
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 5.18 5.2 5.22 5.24 5.26 5.28 5.3 5.32 5.5 5.52 5.54 5.56 5.58 5.6 5.62 5.64 5.66 5.68 5.7
  WLAN encryption modes: WEP40 WEP104 TKIP CCMP
  WLAN authentication modes: open sharedkey wpa-psk wpa-eap
  Module Alias: "pci:v00008086d00000087sv00008086sd00001321bc02sc80i00"
  Driver Info #0:
    Driver Status: iwlagn is active
    Driver Activation Cmd: "modprobe iwlagn"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #12 (PCI bridge)
 * Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
                                                                                                                      [ OK ]
satyam@satyam-laptop:~$

Revision history for this message
Mark Rijckenberg (markrijckenberg) said :
#4

Can you help with this problem?

Provide an answer of your own, or ask Satyam Kaneria for more information if necessary.

To post a message you must log in.