no audio ubuntu amd 64 config

I am unable to hear any sound.

Just after installing ubuntu I was able to hear login sounds.

Then I installed some stuff like nvidia graphics driver and some codecs.

Then I realized that there was no sound when I tried to play a mp4 file.

I have no sound. Not even basic system sounds/beeps.

Here is the output of commands mentioned here
 https://help.ubuntu.com/community/DebuggingSoundProblems

/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

 0 [NVidia ]: HDA-Intel - HDA NVidia
                      HDA NVidia at 0xb0000000 irq 22
           CPU0
  0: 1798517 IO-APIC-edge timer
  1: 12405 IO-APIC-edge i8042
  8: 0 IO-APIC-edge rtc
  9: 31005 IO-APIC-fasteoi acpi
 12: 1302744 IO-APIC-edge i8042
 15: 64584 IO-APIC-edge ide1
 16: 38905 IO-APIC-fasteoi sata_nv
 17: 2 IO-APIC-fasteoi ohci1394
 18: 721143 IO-APIC-fasteoi eth1
 19: 841508 IO-APIC-fasteoi ndiswrapper
 21: 368144 IO-APIC-fasteoi nvidia
 22: 239831 IO-APIC-fasteoi ehci_hcd:usb2, HDA Intel
 23: 0 IO-APIC-fasteoi ohci_hcd:usb1, sdhci:slot0
NMI: 0
LOC: 1798405
ERR: 0
[ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] Command line: root=UUID=be9d46c0-6cfb-47b9-ba48-e7126823e837 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bf10000 (usable)
[ 0.000000] BIOS-e820: 000000003bf10000 - 000000003bf17000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003bf17000 - 000000003bf80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 245520) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F87A0 checksum 0
[ 0.000000] ACPI: RSDP 000F87A0, 0024 (r3 HPQOEM)
[ 0.000000] ACPI: XSDT 3BF100AC, 005C (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3BF16B21, 00F4 (r3 HPQOEM SLIC-MPC 6040000 PTL F4240)
[ 0.000000] ACPI: DSDT 3BF10108, 6A19 (r1 HPQOEM SLIC-MPC 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3BF17FC0, 0040
[ 0.000000] ACPI: SLIC 3BF16C89, 0176 (r1 HPQOEM SLIC-MPC 6040000 HPQ 1)
[ 0.000000] ACPI: MCFG 3BF16DFF, 003C (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
[ 0.000000] ACPI: HPET 3BF16E3B, 0038 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
[ 0.000000] ACPI: APIC 3BF16E73, 0050 (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 3BF16EC3, 0028 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 3BF16EEB, 0115 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003bf10000
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 245520) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003bf10000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 157
[ 0.000000] 0: 256 -> 245520
[ 0.000000] On node 0 totalpages: 245421
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1125 pages reserved
[ 0.000000] DMA zone: 2816 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3300 pages used for memmap
[ 0.000000] DMA32 zone: 238124 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
[ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 240940
[ 0.000000] Kernel command line: root=UUID=be9d46c0-6cfb-47b9-ba48-e7126823e837 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 12.055127] time.c: Detected 2009.143 MHz processor.
[ 12.058182] Console: colour VGA+ 80x25
[ 12.058198] Checking aperture...
[ 12.058201] CPU 0: aperture @ 400000000 size 32 MB
[ 12.058203] Aperture too small (32 MB)
[ 12.064964] No AGP bridge found
[ 12.076035] Memory: 956428k/982080k available (2274k kernel code, 25256k reserved, 1181k data, 296k init)
[ 12.076077] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 12.153224] Calibrating delay using timer specific routine.. 4021.65 BogoMIPS (lpj=8043315)
[ 12.153255] Security Framework v1.0.0 initialized
[ 12.153260] SELinux: Disabled at boot.
[ 12.153352] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 12.154148] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 12.154495] Mount-cache hash table entries: 256
[ 12.154626] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 12.154629] CPU: L2 Cache: 512K (64 bytes/line)
[ 12.154631] CPU 0/0 -> Node 0
[ 12.154652] SMP alternatives: switching to UP code
[ 12.154813] Freeing SMP alternatives: 24k freed
[ 12.155199] Early unpacking initramfs... done
[ 12.443197] ACPI: Core revision 20070126
[ 12.443258] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 12.494055] Using local APIC timer interrupts.
[ 12.543765] result 12557143
[ 12.543767] Detected 12.557 MHz APIC timer.
[ 12.544736] Brought up 1 CPUs
[ 12.544962] NET: Registered protocol family 16
[ 12.545033] ACPI: bus type pci registered
[ 12.545038] PCI: Using configuration type 1
[ 12.545826] ACPI: EC: Look up EC in DSDT
[ 12.547859] ACPI: EC: GPE=0x01, ports=0x66, 0x62
[ 12.558192] ACPI: System BIOS is requesting _OSI(Linux)
[ 12.558194] ACPI: Please test with "acpi_osi=!Linux"
[ 12.558196] Please send dmidecode to <email address hidden>
[ 12.558456] ACPI: Interpreter enabled
[ 12.558458] ACPI: (supports S0 S3 S4 S5)
[ 12.558471] ACPI: Using IOAPIC for interrupt routing
[ 12.568813] ACPI: EC: GPE=0x01, ports=0x66, 0x62
[ 12.568872] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 12.568878] PCI: Probing PCI hardware (bus 00)
[ 12.569963] PCI: Transparent bridge - 0000:00:10.0
[ 12.569990] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 12.570084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 12.570120] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 12.570146] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 12.658910] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 22 23) *0, disabled.
[ 12.659085] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 22 23) *10
[ 12.659257] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 *10 11 14 15)
[ 12.659428] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 12.659600] ACPI: PCI Interrupt Link [LK1E] (IRQs 20) *0, disabled.
[ 12.659770] ACPI: PCI Interrupt Link [LK2E] (IRQs 19) *11
[ 12.659941] ACPI: PCI Interrupt Link [LK3E] (IRQs 21) *10
[ 12.660110] ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 22 23) *0, disabled.
[ 12.660281] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 22 23) *10
[ 12.660458] ACPI: PCI Interrupt Link [LSMU] (IRQs 16 17 18 22 23) *11
[ 12.660638] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 22 23) *11
[ 12.660809] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 22 23) *7
[ 12.660981] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 22 23) *11
[ 12.661157] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 22 23) *0, disabled.
[ 12.661329] ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 22 23) *0, disabled.
[ 12.661501] ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 22 23) *0, disabled.
[ 12.661673] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 22 23) *0, disabled.
[ 12.661850] ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 22 23) *5
[ 12.662026] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 22 23) *0
[ 12.662107] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 12.662117] pnp: PnP ACPI init
[ 12.662125] ACPI: bus type pnp registered
[ 12.665003] pnp: PnP ACPI: found 11 devices
[ 12.665006] ACPI: ACPI bus type pnp unregistered
[ 12.665052] PCI: Using ACPI for IRQ routing
[ 12.665055] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 12.665147] NET: Registered protocol family 8
[ 12.665149] NET: Registered protocol family 20
[ 12.665226] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 12.665230] hpet0: 3 32-bit timers, 25000000 Hz
[ 12.666281] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 12.666286] pnp: 00:02: ioport range 0x1000-0x107f has been reserved
[ 12.666289] pnp: 00:02: ioport range 0x1080-0x10ff has been reserved
[ 12.666292] pnp: 00:02: ioport range 0x1400-0x147f has been reserved
[ 12.666295] pnp: 00:02: ioport range 0x1480-0x14ff has been reserved
[ 12.666298] pnp: 00:02: ioport range 0x1800-0x187f has been reserved
[ 12.666300] pnp: 00:02: ioport range 0x1880-0x18ff has been reserved
[ 12.666303] pnp: 00:02: ioport range 0x2000-0x203f has been reserved
[ 12.666559] PCI: Bridge: 0000:00:02.0
[ 12.666561] IO window: disabled.
[ 12.666564] MEM window: b3000000-b30fffff
[ 12.666566] PREFETCH window: disabled.
[ 12.666568] PCI: Bridge: 0000:00:03.0
[ 12.666570] IO window: 4000-4fff
[ 12.666573] MEM window: b4000000-b7ffffff
[ 12.666576] PREFETCH window: d0000000-d01fffff
[ 12.666579] PCI: Bridge: 0000:00:10.0
[ 12.666580] IO window: disabled.
[ 12.666584] MEM window: b8000000-b80fffff
[ 12.666586] PREFETCH window: disabled.
[ 12.666596] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 12.666602] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 12.666609] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 12.666653] NET: Registered protocol family 2
[ 12.668542] Time: tsc clocksource has been installed.
[ 12.704549] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 12.704902] TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
[ 12.707300] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 12.708070] TCP: Hash tables configured (established 131072 bind 65536)
[ 12.708073] TCP reno registered
[ 12.716588] checking if image is initramfs... it is
[ 13.278789] Freeing initrd memory: 7197k freed
[ 13.284163] Simple Boot Flag at 0x36 set to 0x1
[ 13.284519] audit: initializing netlink socket (disabled)
[ 13.284529] audit(1194292991.184:1): initialized
[ 13.286209] VFS: Disk quotas dquot_6.5.1
[ 13.286260] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 13.286342] io scheduler noop registered
[ 13.286344] io scheduler anticipatory registered
[ 13.286346] io scheduler deadline registered
[ 13.286425] io scheduler cfq registered (default)
[ 13.286441] Boot video device is 0000:00:05.0
[ 13.507777] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 13.507797] assign_interrupt_mode Found MSI capability
[ 13.507800] Allocate Port Service[0000:00:02.0:pcie00]
[ 13.507851] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 13.507870] assign_interrupt_mode Found MSI capability
[ 13.507872] Allocate Port Service[0000:00:03.0:pcie00]
[ 13.528768] Real Time Clock Driver v1.12ac
[ 13.528941] hpet_resources: 0xfed00000 is busy
[ 13.528983] Linux agpgart interface v0.102 (c) Dave Jones
[ 13.528986] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 13.529906] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 13.530089] input: Macintosh mouse button emulation as /class/input/input0
[ 13.530146] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 13.530956] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 13.531031] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 13.531035] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 13.531038] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 13.531040] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 13.531043] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 13.531272] mice: PS/2 mouse device common for all mice
[ 13.531385] TCP cubic registered
[ 13.531450] NET: Registered protocol family 1
[ 13.531673] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 13.531680] Freeing unused kernel memory: 296k freed
[ 13.599381] input: AT Translated Set 2 keyboard as /class/input/input1
[ 14.695485] AppArmor: AppArmor initialized<5>audit(1194292992.600:2): type=1505 info="AppArmor initialized" pid=1249
[ 14.700503] fuse init (API version 7.8)
[ 14.704443] Failure registering capabilities with primary security module.
[ 14.717167] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 14.717173] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 14.717183] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 14.722341] Marking TSC unstable due to possible TSC halt in C2
[ 14.725848] Time: hpet clocksource has been installed.
[ 14.729525] ACPI: Thermal Zone [TZS0] (72 C)
[ 14.734385] ACPI: Thermal Zone [TZS1] (75 C)
[ 15.354790] usbcore: registered new interface driver usbfs
[ 15.354814] usbcore: registered new interface driver hub
[ 15.354835] usbcore: registered new device driver usb
[ 15.355482] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 15.355818] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
[ 15.355827] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 23 (level, high) -> IRQ 23
[ 15.355940] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 15.355946] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 15.356081] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 15.356104] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xb0004000
[ 15.380405] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 15.380410] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 15.399334] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[ 15.415271] usb usb1: configuration #1 chosen from 1 choice
[ 15.415298] hub 1-0:1.0: USB hub found
[ 15.415309] hub 1-0:1.0: 8 ports detected
[ 15.471073] SCSI subsystem initialized
[ 15.476066] libata version 2.21 loaded.
[ 15.517377] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 15.517389] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 22 (level, high) -> IRQ 22
[ 15.517513] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 15.517519] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 15.517571] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[ 15.517600] ehci_hcd 0000:00:0b.1: debug port 1
[ 15.517604] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[ 15.517616] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xb0005000
[ 15.517623] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 15.517695] usb usb2: configuration #1 chosen from 1 choice
[ 15.517722] hub 2-0:1.0: USB hub found
[ 15.517728] hub 2-0:1.0: 8 ports detected
[ 15.621131] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
[ 15.621149] NFORCE-MCP51: chipset revision 241
[ 15.621151] NFORCE-MCP51: not 100% native mode: will probe irqs later
[ 15.621157] NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller
[ 15.621165] ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:pio, hdb:pio
[ 15.621174] ide1: BM-DMA at 0x3088-0x308f, BIOS settings: hdc:pio, hdd:pio
[ 15.621181] Probing IDE interface ide0...
[ 16.187909] Probing IDE interface ide1...
[ 16.923096] hdc: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive
[ 17.259120] ide1 at 0x170-0x177,0x376 on irq 15
[ 17.262368] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 18
[ 17.262379] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 18 (level, high) -> IRQ 18
[ 17.262385] PCI: Setting latency timer of device 0000:00:14.0 to 64
[ 17.262393] forcedeth: using HIGHDMA
[ 17.782195] eth0: forcedeth.c: subsystem: 0103c:30b5 bound to 0000:00:14.0
[ 17.782626] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 17
[ 17.782637] ACPI: PCI Interrupt 0000:05:09.0[A] -> Link [LNK1] -> GSI 17 (level, high) -> IRQ 17
[ 17.835065] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[b8000000-b80007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 17.842848] sata_nv 0000:00:0e.0: version 3.4
[ 17.842863] PCI: Enabling device 0000:00:0e.0 (0005 -> 0007)
[ 17.843163] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 16
[ 17.843172] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 16 (level, high) -> IRQ 16
[ 17.843346] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 17.844252] scsi0 : sata_nv
[ 17.844449] scsi1 : sata_nv
[ 17.844628] ata1: SATA max UDMA/133 cmd 0x00000000000130b0 ctl 0x00000000000130a6 bmdma 0x0000000000013090 irq 16
[ 17.844633] ata2: SATA max UDMA/133 cmd 0x00000000000130a8 ctl 0x00000000000130a2 bmdma 0x0000000000013098 irq 16
[ 17.854752] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, (U)DMA
[ 17.854761] Uniform CD-ROM driver Revision: 3.20
[ 18.309007] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 18.317156] ata1.00: ATA-7: ST980811AS, 3.BHD, max UDMA/100
[ 18.317160] ata1.00: 156301488 sectors, multi 16: LBA48
[ 18.333129] ata1.00: configured for UDMA/100
[ 18.644530] ata2: SATA link down (SStatus 0 SControl 300)
[ 18.655217] scsi 0:0:0:0: Direct-Access ATA ST980811AS 3.BH PQ: 0 ANSI: 5
[ 18.662858] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 18.662870] sd 0:0:0:0: [sda] Write Protect is off
[ 18.662873] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 18.662884] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.662934] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 18.662941] sd 0:0:0:0: [sda] Write Protect is off
[ 18.662943] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 18.662953] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.662958] sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[ 18.853015] sd 0:0:0:0: [sda] Attached SCSI disk
[ 18.856567] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 19.111996] ieee1394: Host added: ID:BUS[0-00:1023] GUID[07e40a00a8d45010]
[ 19.196742] Attempting manual resume
[ 19.196745] swsusp: Resume From Partition 8:7
[ 19.196747] PM: Checking swsusp image.
[ 19.196910] PM: Resume from disk failed.
[ 19.235651] kjournald starting. Commit interval 5 seconds
[ 19.235661] EXT3-fs: mounted filesystem with ordered data mode.
[ 29.457563] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 29.462871] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 29.638128] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
[ 29.638157] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
[ 29.682246] sdhci: Secure Digital Host Controller Interface driver
[ 29.682250] sdhci: Copyright(c) Pierre Ossman
[ 29.682292] sdhci: SDHCI controller found at 0000:05:09.1 [1180:0822] (rev 19)
[ 29.682618] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 23
[ 29.682622] ACPI: PCI Interrupt 0000:05:09.1[B] -> Link [LNK2] -> GSI 23 (level, high) -> IRQ 23
[ 29.682820] mmc0: SDHCI at 0xb8000800 irq 23 DMA
[ 29.805984] nvidia: module license 'NVIDIA' taints kernel.
[ 30.153415] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 21
[ 30.153427] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LK3E] -> GSI 21 (level, high) -> IRQ 21
[ 30.153434] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 30.153616] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007
[ 30.448485] input: PC Speaker as /class/input/input2
[ 30.805662] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 30.805668] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 22 (level, high) -> IRQ 22
[ 30.805822] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 31.022730] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 31.052821] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 31.926520] loop: module loaded
[ 31.993248] lp: driver loaded but no devices found
[ 32.144416] ndiswrapper version 1.45 loaded (smp=yes)
[ 32.244638] ndiswrapper (link_pe_images:577): fixing KI_USER_SHARED_DATA address in the driver
[ 32.245899] ndiswrapper: driver bcmwl5 (Broadcom,03/23/2006, 4.40.19.0) loaded
[ 32.246394] ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 19
[ 32.246404] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LK2E] -> GSI 19 (level, high) -> IRQ 19
[ 32.246431] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 32.252768] ndiswrapper: using IRQ 19
[ 32.607092] wlan0: ethernet device 00:1a:73:34:82:eb using NDIS driver: bcmwl5, version: 0x4281300, NDIS version: 0x501, vendor: '', 14E4:4311.5.conf
[ 32.607131] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 32.618300] usbcore: registered new interface driver ndiswrapper
[ 32.628321] ndiswrapper: changing interface name from 'wlan0' to 'eth0'
[ 32.699140] Adding 273064k swap on /dev/sda7. Priority:-1 extents:1 across:273064k
[ 33.094188] EXT3 FS on sda3, internal journal
[ 34.137792] No dock devices found.
[ 34.162810] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 34.225612] ACPI: Battery Slot [BAT0] (battery present)
[ 34.343549] input: Power Button (FF) as /class/input/input4
[ 34.347486] ACPI: Power Button (FF) [PWRF]
[ 34.373159] input: Lid Switch as /class/input/input5
[ 34.377062] ACPI: Lid Switch [LID0]
[ 34.402461] input: Sleep Button (CM) as /class/input/input6
[ 34.406359] ACPI: Sleep Button (CM) [SLPB]
[ 34.432034] input: Power Button (CM) as /class/input/input7
[ 34.435924] ACPI: Power Button (CM) [PWRB]
[ 34.448312] ACPI: AC Adapter [ADP1] (on-line)
[ 34.598642] powernow-k8: Found 1 AMD Turion(tm) 64 processors (version 2.00.00)
[ 34.598680] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x10
[ 34.598683] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12
[ 34.598685] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14
[ 34.598688] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x18
[ 35.909599] ppdev: user-space parallel port driver
[ 35.989372] eth1: no link during initialization.
[ 36.127462] audit(1194273214.341:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4954 profile="/usr/sbin/cupsd"
[ 36.857258] Netfilter messages via NETLINK v0.30.
[ 36.870121] nf_conntrack version 0.5.0 (3836 buckets, 30688 max)
[ 36.970203] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 37.204083] Failure registering capabilities with primary security module.
[ 38.513623] Bluetooth: Core ver 2.11
[ 38.513718] NET: Registered protocol family 31
[ 38.513721] Bluetooth: HCI device and connection manager initialized
[ 38.513724] Bluetooth: HCI socket layer initialized
[ 38.600921] Bluetooth: L2CAP ver 2.8
[ 38.600926] Bluetooth: L2CAP socket layer initialized
[ 38.605535] Bluetooth: RFCOMM socket layer initialized
[ 38.605606] Bluetooth: RFCOMM TTY layer initialized
[ 38.605609] Bluetooth: RFCOMM ver 1.8
[ 66.125386] NET: Registered protocol family 17
[ 75.999180] NET: Registered protocol family 10
[ 75.999323] lo: Disabled Privacy Extensions
[ 75.999488] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 82.192272] eth0: no IPv6 routers present
00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f0] (rev a2)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Capabilities: [44] HyperTransport: Slave or Primary Interface
  Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
  Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
  Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
  Link Control 1: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
  Link Config 1: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
  Revision ID: 1.03
  Link Frequency 0: 800MHz
  Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
  Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
  Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
  Link Frequency 1: 800MHz
  Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
  Link Frequency Capability 1: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
  Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
  Prefetchable memory behind bridge Upper: 00-00
  Bus Number: 00
 Capabilities: [e0] HyperTransport: MSI Mapping

00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0 [10de:02fa] (rev a2)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1 [10de:02fe] (rev a2)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5 [10de:02f8] (rev a2)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4 [10de:02f9] (rev a2)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0

00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev a2)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Capabilities: [44] #00 [00fe]
 Capabilities: [fc] #00 [0000]

00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3 [10de:027f] (rev a2)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2 [10de:027e] (rev a2)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:02.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fc] (rev a1) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
 Memory behind bridge: b3000000-b30fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
 Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
 Capabilities: [48] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
  Address: 0000000000000000 Data: 0000
 Capabilities: [60] HyperTransport: MSI Mapping
 Capabilities: [80] Express Root Port (Slot+) IRQ 0
  Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
  Device: Latency L0s <512ns, L1 <4us
  Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
  Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
  Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
  Link: Latency L0s <512ns, L1 <4us
  Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
  Link: Speed 2.5Gb/s, Width x1
  Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
  Slot: Number 0, PowerLimit 0.000000
  Slot: Enabled AtnBtn+ PwrFlt+ MRL- PresDet- CmdCplt- HPIrq+
  Slot: AttnInd Off, PwrInd On, Power-
  Root: Correctable- Non-Fatal- Fatal- PME-

00:03.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fd] (rev a1) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
 I/O behind bridge: 00004000-00004fff
 Memory behind bridge: b4000000-b7ffffff
 Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
 Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
 Capabilities: [48] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
  Address: 0000000000000000 Data: 0000
 Capabilities: [60] HyperTransport: MSI Mapping
 Capabilities: [80] Express Root Port (Slot+) IRQ 0
  Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
  Device: Latency L0s <512ns, L1 <4us
  Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
  Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
  Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
  Link: Latency L0s <512ns, L1 <4us
  Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
  Link: Speed 2.5Gb/s, Width x1
  Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
  Slot: Number 0, PowerLimit 0.000000
  Slot: Enabled AtnBtn+ PwrFlt+ MRL- PresDet- CmdCplt- HPIrq+
  Slot: AttnInd Off, PwrInd On, Power-
  Root: Correctable- Non-Fatal- Fatal- PME-

00:05.0 VGA compatible controller [0300]: nVidia Corporation C51 [Geforce 6150 Go] [10de:0244] (rev a2) (prog-if 00 [VGA])
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin A routed to IRQ 21
 Region 0: Memory at b2000000 (32-bit, non-prefetchable) [size=16M]
 Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
 Region 3: Memory at b1000000 (64-bit, non-prefetchable) [size=16M]
 [virtual] Expansion ROM at 50000000 [disabled] [size=128K]
 Capabilities: [48] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
  Address: 0000000000000000 Data: 0000

00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Capabilities: [44] HyperTransport: Slave or Primary Interface
  Command: BaseUnitID=9 UnitCnt=15 MastHost- DefDir- DUL-
  Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
  Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
  Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
  Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
  Revision ID: 1.03
  Link Frequency 0: 800MHz
  Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
  Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
  Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
  Link Frequency 1: 200MHz
  Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
  Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
  Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
  Prefetchable memory behind bridge Upper: 00-00
  Bus Number: 00
 Capabilities: [e0] HyperTransport: MSI Mapping

00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a3)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0

00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a3)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Interrupt: pin A routed to IRQ 10
 Region 4: I/O ports at 3040 [size=64]
 Region 5: I/O ports at 3000 [size=64]
 Capabilities: [44] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.3 Co-processor [0b40]: nVidia Corporation MCP51 PMU [10de:0271] (rev a3)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0 (750ns min, 250ns max)
 Interrupt: pin B routed to IRQ 11
 Region 0: Memory at b0040000 (32-bit, non-prefetchable) [size=256K]

00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a3) (prog-if 10 [OHCI])
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0 (750ns min, 250ns max)
 Interrupt: pin A routed to IRQ 23
 Region 0: Memory at b0004000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: [44] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a3) (prog-if 20 [EHCI])
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0 (750ns min, 250ns max)
 Interrupt: pin B routed to IRQ 22
 Region 0: Memory at b0005000 (32-bit, non-prefetchable) [size=256]
 Capabilities: [44] Debug port
 Capabilities: [80] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev f1) (prog-if 8a [Master SecP PriP])
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0 (750ns min, 250ns max)
 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
 Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
 Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
 Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
 Region 4: I/O ports at 3080 [size=16]
 Capabilities: [44] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266] (rev f1) (prog-if 85 [Master SecO PriO])
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0 (750ns min, 250ns max)
 Interrupt: pin A routed to IRQ 16
 Region 0: I/O ports at 30b0 [size=8]
 Region 1: I/O ports at 30a4 [size=4]
 Region 2: I/O ports at 30a8 [size=8]
 Region 3: I/O ports at 30a0 [size=4]
 Region 4: I/O ports at 3090 [size=16]
 Region 5: Memory at b0006000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: [44] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
  Address: 0000000000000000 Data: 0000
 Capabilities: [cc] HyperTransport: MSI Mapping

00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2) (prog-if 01 [Subtractive decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
 Memory behind bridge: b8000000-b80fffff
 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
 Capabilities: [b8] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
 Capabilities: [8c] HyperTransport: MSI Mapping

00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0 (500ns min, 1250ns max)
 Interrupt: pin B routed to IRQ 22
 Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=16K]
 Capabilities: [44] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
  Address: 0000000000000000 Data: 0000
  Masking: 00000000 Pending: 00000000
 Capabilities: [6c] HyperTransport: MSI Mapping

00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller [10de:0269] (rev a3)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0 (250ns min, 5000ns max)
 Interrupt: pin A routed to IRQ 18
 Region 0: Memory at b0007000 (32-bit, non-prefetchable) [size=4K]
 Region 1: I/O ports at 30b8 [size=8]
 Capabilities: [44] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable+ DSel=0 DScale=0 PME-

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Capabilities: [80] HyperTransport: Host or Secondary Interface
  !!! Possibly incomplete decoding
  Command: WarmRst+ DblEnd-
  Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=8
  Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
  Revision ID: 1.02

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Capabilities: [f0] #0f [0010]

01:00.0 Network controller [0280]: Broadcom Corporation BCM94311MCG wlan mini-PCI [14e4:4311] (rev 01)
 Subsystem: Hewlett-Packard Company Unknown device [103c:1364]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 19
 Region 0: Memory at b3000000 (32-bit, non-prefetchable) [size=16K]
 Capabilities: [40] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=2 PME-
 Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
  Address: 00000000 Data: 0000
 Capabilities: [d0] Express Legacy Endpoint IRQ 0
  Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
  Device: Latency L0s <4us, L1 unlimited
  Device: AtnBtn- AtnInd- PwrInd-
  Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
  Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
  Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
  Link: Latency L0s <4us, L1 <64us
  Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
  Link: Speed 2.5Gb/s, Width x1

05:09.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (prog-if 10 [OHCI])
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 64 (500ns min, 1000ns max)
 Interrupt: pin A routed to IRQ 17
 Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=2K]
 Capabilities: [dc] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=2 PME+

05:09.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 64
 Interrupt: pin B routed to IRQ 23
 Region 0: Memory at b8000800 (32-bit, non-prefetchable) [size=256]
 Capabilities: [80] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=2 PME-

05:09.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 01)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin B routed to IRQ 10
 Region 0: Memory at b8000c00 (32-bit, non-prefetchable) [size=256]
 Capabilities: [80] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=2 PME-

05:09.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 0a)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Interrupt: pin B routed to IRQ 10
 Region 0: Memory at b8001000 (32-bit, non-prefetchable) [size=256]
 Capabilities: [80] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=2 PME-

05:09.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 05)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30b5]
 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Interrupt: pin B routed to IRQ 10
 Region 0: Memory at b8001400 (32-bit, non-prefetchable) [size=256]
 Capabilities: [80] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=2 PME-

Mixers:
0: Conexant CX20549 (Venice)
Simple mixer control 'Master',0
  Capabilities: pvolume pswitch pswitch-joined
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 43
  Mono:
  Front Left: Playback 43 [100%] [on]
  Front Right: Playback 43 [100%] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'LineIn',0
  Capabilities: cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Mono
  Mono: Capture [on]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Digital',0
  Capabilities: cvolume
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 120
  Front Left: Capture 120 [100%] [30.00dB]
  Front Right: Capture 120 [100%] [30.00dB]
Simple mixer control 'Ext Mic',0
  Capabilities: volume pswitch
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 23
  Front Left: 23 [100%] [34.50dB] Playback [on]
  Front Right: 23 [100%] [34.50dB] Playback [on]
Simple mixer control 'Int Mic',0
  Capabilities: volume pswitch
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 23
  Front Left: 23 [100%] [34.50dB] Playback [on]
  Front Right: 23 [100%] [34.50dB] Playback [on]
Simple mixer control 'IntMic',0
  Capabilities: cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Mono
  Mono: Capture [off]