I cannot get my usb ports to work

Asked by jordyboy08

My usb ports will not work whatsoever and I really need them for my usb stick and wireless desktop. I am on Gutsy Gibbon 7.10 if this helps.

Question information

Language:
English Edit question
Status:
Answered
For:
Ubuntu gdm Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
Vojtěch Trefný (vojtech.trefny) said :
#1

Some information about your hardware would be very helpful...

Revision history for this message
naufal (musp-student) said :
#2

hello,
Please connect your usb stick drive and type in terminal 'dmesg'...
Please post the 'dmesg' result...

Revision history for this message
jordyboy08 (jordansyer) said :
#3

my mobo is a via kvm800 and works fine with my wireless keyboard + mouse. My processor is an intel celeron d 1.6 ghz.

Revision history for this message
jordyboy08 (jordansyer) said :
#4

Here's the result:[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:02:57 UTC 2007 (Ubuntu 2.6.22-14.47-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bfef000 (usable)
[ 0.000000] BIOS-e820: 000000001bff0000 - 000000001bffffc0 (ACPI data)
[ 0.000000] BIOS-e820: 000000001bffffc0 - 000000001c000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 447MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 114671) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114671
[ 0.000000] HighMem 114671 -> 114671
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114671
[ 0.000000] On node 0 totalpages: 114671
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 863 pages used for memmap
[ 0.000000] Normal zone: 109712 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00E6010 checksum 0
[ 0.000000] ACPI: RSDP 000E6010, 0014 (r0 OID_00)
[ 0.000000] ACPI: RSDT 1BFFC3C0, 002C (r1 INSYDE FACP_000 100 0000 10200)
[ 0.000000] ACPI: FACP 1BFFFB10, 0074 (r1 INSYDE FACP_000 100 0000 10200)
[ 0.000000] ACPI: DSDT 1BFFC400, 3709 (r1 MTC___ 8650____ 1000 INTL 2002036)
[ 0.000000] ACPI: FACS 1BFFFFC0, 0040
[ 0.000000] ACPI: APIC 1BFFFBA0, 005A (r1 INSYDE APIC_000 30303030 0000 10200)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e3f80000)
[ 0.000000] Built 1 zonelists. Total pages: 113776
[ 0.000000] Kernel command line: root=UUID=96197108-b236-4ce5-8314-7a91133ae3af ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1492.821 MHz processor.
[ 10.227123] Console: colour VGA+ 80x25
[ 10.227382] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 10.227683] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 10.244013] Memory: 443148k/458684k available (2015k kernel code, 14912k reserved, 916k data, 364k init, 0k highmem)
[ 10.244025] virtual kernel memory layout:
[ 10.244026] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 10.244028] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 10.244029] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 10.244031] lowmem : 0xc0000000 - 0xdbfef000 ( 447 MB)
[ 10.244032] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 10.244034] .data : 0xc02f7de6 - 0xc03dce84 ( 916 kB)
[ 10.244035] .text : 0xc0100000 - 0xc02f7de6 (2015 kB)
[ 10.244039] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 10.244088] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 10.324006] Calibrating delay using timer specific routine.. 2988.98 BogoMIPS (lpj=5977965)
[ 10.324040] Security Framework v1.0.0 initialized
[ 10.324051] SELinux: Disabled at boot.
[ 10.324067] Mount-cache hash table entries: 512
[ 10.324231] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 10.324246] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 10.324249] CPU: L2 cache: 1024K
[ 10.324254] CPU: After all inits, caps: afe9fbff 00000000 00000000 00002040 00000000 00000000 00000000
[ 10.324264] Compat vDSO mapped to ffffe000.
[ 10.324279] Checking 'hlt' instruction... OK.
[ 10.340102] SMP alternatives: switching to UP code
[ 10.340328] Freeing SMP alternatives: 11k freed
[ 10.340641] Early unpacking initramfs... done
[ 10.729770] ACPI: Core revision 20070126
[ 10.729849] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 10.768370] CPU0: Intel(R) Celeron(R) M processor 1.50GHz stepping 08
[ 10.768402] Total of 1 processors activated (2988.98 BogoMIPS).
[ 10.769146] ENABLING IO-APIC IRQs
[ 10.769471] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 10.915224] Brought up 1 CPUs
[ 10.915395] Booting paravirtualized kernel on bare hardware
[ 10.915494] Time: 16:33:36 Date: 00/21/108
[ 10.915524] NET: Registered protocol family 16
[ 10.915630] EISA bus registered
[ 10.915649] ACPI: bus type pci registered
[ 10.915727] PCI: PCI BIOS revision 2.10 entry at 0xe9c04, last bus=1
[ 10.915730] PCI: Using configuration type 1
[ 10.915732] Setting up standard PCI resources
[ 10.918079] ACPI: EC: Look up EC in DSDT
[ 10.918721] ACPI: EC: GPE=0x01, ports=0x66, 0x62
[ 10.921071] ACPI: Interpreter enabled
[ 10.921075] ACPI: (supports S0 S1 S3 S4 S5)
[ 10.921098] ACPI: Using IOAPIC for interrupt routing
[ 10.931431] ACPI: EC: GPE=0x01, ports=0x66, 0x62
[ 10.931499] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 10.931514] PCI: Probing PCI hardware (bus 00)
[ 10.932258] PCI quirk: region 1000-107f claimed by vt8235 PM
[ 10.932263] PCI quirk: region 1400-140f claimed by vt8235 SMB
[ 10.932722] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 10.946030] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[ 10.946129] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15)
[ 10.946224] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[ 10.946318] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15)
[ 10.946404] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 10.946490] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 10.946577] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 10.946663] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 10.946771] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[ 10.946889] ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11
[ 10.947046] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled.
[ 10.947129] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node da74e678), AE_TYPE
[ 10.947164] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126]
[ 10.947171] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126]
[ 10.947175] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0
[ 10.947258] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 10.947274] pnp: PnP ACPI init
[ 10.947283] ACPI: bus type pnp registered
[ 10.951666] pnp: PnP ACPI: found 9 devices
[ 10.951669] ACPI: ACPI bus type pnp unregistered
[ 10.951676] PnPBIOS: Disabled by ACPI PNP
[ 10.951729] PCI: Using ACPI for IRQ routing
[ 10.951733] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 10.954380] NET: Registered protocol family 8
[ 10.954383] NET: Registered protocol family 20
[ 10.954463] pnp: 00:05: iomem range 0xe0000-0xfffff could not be reserved
[ 10.954467] pnp: 00:05: iomem range 0xfff80000-0xffffffff could not be reserved
[ 10.954471] pnp: 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
[ 10.954475] pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
[ 10.954481] pnp: 00:07: ioport range 0x330-0x331 has been reserved
[ 10.954484] pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 10.954488] pnp: 00:07: ioport range 0x1000-0x107f has been reserved
[ 10.954491] pnp: 00:07: ioport range 0x1400-0x140f has been reserved
[ 10.955128] Time: tsc clocksource has been installed.
[ 10.984785] PCI: Bridge: 0000:00:01.0
[ 10.984789] IO window: c000-dfff
[ 10.984795] MEM window: c0000000-cfffffff
[ 10.984800] PREFETCH window: 90000000-9fffffff
[ 10.984806] PCI: Bus 2, cardbus bridge: 0000:00:09.0
[ 10.984809] IO window: 00001800-000018ff
[ 10.984813] IO window: 00001c00-00001cff
[ 10.984818] PREFETCH window: 20000000-23ffffff
[ 10.984823] MEM window: 24000000-27ffffff
[ 10.984845] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 10.984864] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 10.984886] NET: Registered protocol family 2
[ 11.023067] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 11.023117] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[ 11.023332] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 11.023511] TCP: Hash tables configured (established 16384 bind 16384)
[ 11.023515] TCP reno registered
[ 11.035176] checking if image is initramfs... it is
[ 11.486387] Switched to high resolution mode on CPU 0
[ 11.795856] Freeing initrd memory: 7048k freed
[ 11.796394] audit: initializing netlink socket (disabled)
[ 11.796418] audit(1200933216.076:1): initialized
[ 11.798629] VFS: Disk quotas dquot_6.5.1
[ 11.798692] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 11.798815] io scheduler noop registered
[ 11.798818] io scheduler anticipatory registered
[ 11.798821] io scheduler deadline registered
[ 11.798839] io scheduler cfq registered (default)
[ 11.798861] PCI: VIA PCI bridge detected. Disabling DAC.
[ 11.798922] Boot video device is 0000:01:00.0
[ 11.799122] isapnp: Scanning for PnP cards...
[ 12.153066] isapnp: No Plug & Play device found
[ 12.191898] Real Time Clock Driver v1.12ac
[ 12.192062] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 12.193703] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 12.193985] input: Macintosh mouse button emulation as /class/input/input0
[ 12.194086] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 12.206419] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 12.212054] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 12.212061] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 12.212064] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 12.212067] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 12.212070] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 12.212294] mice: PS/2 mouse device common for all mice
[ 12.213073] EISA: Probing bus 0 at eisa.0
[ 12.213083] Cannot allocate resource for EISA slot 1
[ 12.213117] EISA: Detected 0 cards.
[ 12.213252] TCP cubic registered
[ 12.213278] NET: Registered protocol family 1
[ 12.213324] Using IPI No-Shortcut mode
[ 12.213549] Magic number: 8:273:591
[ 12.213678] hash matches device ptyc9
[ 12.214088] Freeing unused kernel memory: 364k freed
[ 12.265189] input: AT Translated Set 2 keyboard as /class/input/input1
[ 13.432256] AppArmor: AppArmor initialized<5>audit(1200933217.576:2): type=1505 info="AppArmor initialized" pid=1188
[ 13.441561] fuse init (API version 7.8)
[ 13.446344] Failure registering capabilities with primary security module.
[ 13.463243] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 13.463251] ACPI: Processor [CPU0] (supports 16 throttling states)
[ 14.015736] usbcore: registered new interface driver usbfs
[ 14.015768] usbcore: registered new interface driver hub
[ 14.015792] usbcore: registered new device driver usb
[ 14.016770] USB Universal Host Controller Interface driver v3.0
[ 14.017024] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node da74e678), AE_TYPE
[ 14.017035] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126]
[ 14.017042] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126]
[ 14.017047] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 14.017052] ACPI: Invalid IRQ link routing entry
[ 14.017054] ACPI: Unable to derive IRQ for device 0000:00:10.0
[ 14.017057] ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI - using IRQ 11
[ 14.017086] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 14.017382] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 14.017420] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200
[ 14.017560] usb usb1: configuration #1 chosen from 1 choice
[ 14.017598] hub 1-0:1.0: USB hub found
[ 14.017605] hub 1-0:1.0: 2 ports detected
[ 14.113159] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 14.118896] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node da74e678), AE_TYPE
[ 14.118909] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126]
[ 14.118917] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126]
[ 14.118921] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 14.118926] ACPI: Invalid IRQ link routing entry
[ 14.118928] ACPI: Unable to derive IRQ for device 0000:00:10.1
[ 14.118931] ACPI: PCI Interrupt 0000:00:10.1[B]: no GSI - using IRQ 7
[ 14.118961] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 14.118993] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 14.119032] uhci_hcd 0000:00:10.1: irq 7, io base 0x00001220
[ 14.119154] usb usb2: configuration #1 chosen from 1 choice
[ 14.119186] hub 2-0:1.0: USB hub found
[ 14.119194] hub 2-0:1.0: 2 ports detected
[ 14.213456] SCSI subsystem initialized
[ 14.219546] libata version 2.21 loaded.
[ 14.222732] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node da74e678), AE_TYPE
[ 14.222744] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126]
[ 14.222752] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126]
[ 14.222757] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 14.222761] ACPI: Invalid IRQ link routing entry
[ 14.222764] ACPI: Unable to derive IRQ for device 0000:00:10.2
[ 14.222766] ACPI: PCI Interrupt 0000:00:10.2[C]: no GSI - using IRQ 5
[ 14.222797] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 14.222833] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 14.222872] uhci_hcd 0000:00:10.2: irq 5, io base 0x00001240
[ 14.222990] usb usb3: configuration #1 chosen from 1 choice
[ 14.223031] hub 3-0:1.0: USB hub found
[ 14.223040] hub 3-0:1.0: 2 ports detected
[ 14.327460] PCI: Enabling device 0000:00:10.3 (0000 -> 0002)
[ 14.327605] ACPI Error (uteval-0293): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node da74e678), AE_TYPE
[ 14.327616] ACPI Error (uteval-0299): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20070126]
[ 14.327624] ACPI Exception (pci_link-0277): AE_TYPE, Evaluating _CRS [20070126]
[ 14.327629] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[ 14.327634] ACPI: Invalid IRQ link routing entry
[ 14.327636] ACPI: Unable to derive IRQ for device 0000:00:10.3
[ 14.327639] ACPI: PCI Interrupt 0000:00:10.3[D]: no GSI - using IRQ 10
[ 14.327673] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 14.327720] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 14.327778] ehci_hcd 0000:00:10.3: irq 10, io mem 0x28011000
[ 14.362234] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 14.362257] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 14.362408] usb usb4: configuration #1 chosen from 1 choice
[ 14.362445] hub 4-0:1.0: USB hub found
[ 14.362455] hub 4-0:1.0: 6 ports detected
[ 4.016000] Marking TSC unstable due to: possible TSC halt in C2.
[ 4.020000] Time: acpi_pm clocksource has been installed.
[ 4.092000] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 11, using IRQ 23
[ 4.092000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 23
[ 4.092000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKB] -> GSI 23 (level, low) -> IRQ 17
[ 4.096000] eth0: VIA Rhine II at 0x1e200, 00:40:d0:8b:c7:da, IRQ 17.
[ 4.096000] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[ 4.104000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 4.104000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 4.104000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[ 4.104000] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
[ 4.104000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 4.104000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 4.104000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 18
[ 4.104000] VP_IDE: chipset revision 6
[ 4.104000] VP_IDE: not 100% native mode: will probe irqs later
[ 4.104000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[ 4.104000] ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
[ 4.104000] ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
[ 4.104000] Probing IDE interface ide0...
[ 4.520000] hda: WDC WD400UE-07HCT0, ATA DISK drive
[ 5.192000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.232000] Probing IDE interface ide1...
[ 6.000000] usb 1-1: new low speed USB device using uhci_hcd and address 3
[ 6.096000] hdc: PHILIPS DVD+/-RW SDVD8820, ATAPI CD/DVD-ROM drive
[ 6.772000] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.780000] hda: max request size: 128KiB
[ 6.788000] hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[ 6.788000] hda: cache flushes supported
[ 6.788000] hda: hda1 hda2 < hda5 >
[ 6.904000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 6.904000] Uniform CD-ROM driver Revision: 3.20
[ 7.208000] Attempting manual resume
[ 7.208000] swsusp: Resume From Partition 3:5
[ 7.208000] PM: Checking swsusp image.
[ 7.208000] PM: Resume from disk failed.
[ 7.260000] kjournald starting. Commit interval 5 seconds
[ 7.260000] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.036000] usb 1-1: configuration #1 chosen from 1 choice
[ 9.528000] usb 1-2: new low speed USB device using uhci_hcd and address 4
[ 11.052000] usb 1-2: configuration #1 chosen from 1 choice
[ 17.116000] ath_hal: module license 'Proprietary' taints kernel.
[ 17.120000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 17.316000] Linux agpgart interface v0.102 (c) Dave Jones
[ 17.548000] wlan: 0.8.4.2 (0.9.3.2)
[ 17.560000] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
[ 17.572000] agpgart: AGP aperture is 128M @ 0xa0000000
[ 17.580000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.584000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.648000] Yenta: CardBus bridge found at 0000:00:09.0 [1734:10ab]
[ 17.648000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 17.648000] Yenta: Routing CardBus interrupts to PCI
[ 17.648000] Yenta TI: socket 0000:00:09.0, mfunc 0x01001002, devctl 0x44
[ 17.684000] ath_pci: 0.9.4.5 (0.9.3.2)
[ 17.880000] Yenta: ISA IRQ mask 0x0058, PCI irq 16
[ 17.880000] Socket status: 30000006
[ 17.880000] PCI: Enabling device 0000:00:06.0 (0000 -> 0002)
[ 17.880000] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 18.716000] ath_rate_sample: 1.2 (0.9.3.2)
[ 18.716000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 18.716000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 18.716000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 18.716000] wifi0: mac 7.8 phy 4.5 radio 5.6
[ 18.716000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 18.716000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 18.716000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 18.716000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 18.716000] wifi0: Use hw queue 8 for CAB traffic
[ 18.716000] wifi0: Use hw queue 9 for beacons
[ 18.740000] wifi0: Atheros 5212: mem=0x28000000, irq=19
[ 19.112000] input: PC Speaker as /class/input/input2
[ 19.360000] irda_init()
[ 19.360000] NET: Registered protocol family 23
[ 19.380000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0
[ 19.432000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 19.632000] usbcore: registered new interface driver hiddev
[ 19.800000] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
[ 19.800000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 5, using IRQ 22
[ 19.800000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 19.800000] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20
[ 19.804000] PCI: Setting latency timer of device 0000:00:11.6 to 64
[ 20.044000] cs: IO port probe 0x100-0x3af: clean.
[ 20.048000] cs: IO port probe 0x3e0-0x4ff: clean.
[ 20.048000] cs: IO port probe 0x820-0x8ff: clean.
[ 20.048000] cs: IO port probe 0xc00-0xcf7: clean.
[ 20.048000] cs: IO port probe 0xa00-0xaff: clean.
[ 20.124000] input: Device USB Device as /class/input/input4
[ 20.124000] input: USB HID v1.00 Keyboard [Device USB Device] on usb-0000:00:10.0-1
[ 20.312000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20
[ 20.312000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 20.628000] input: Device USB Device as /class/input/input5
[ 20.628000] input: USB HID v1.00 Mouse [Device USB Device] on usb-0000:00:10.0-1
[ 21.132000] input: HID 062a:0000 as /class/input/input6
[ 21.132000] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:10.0-2
[ 21.132000] usbcore: registered new interface driver usbhid
[ 21.132000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 22.276000] lp: driver loaded but no devices found
[ 22.332000] Adding 1317288k swap on /dev/hda5. Priority:-1 extents:1 across:1317288k
[ 22.824000] EXT3 FS on hda1, internal journal
[ 25.536000] No dock devices found.
[ 25.628000] input: Power Button (FF) as /class/input/input7
[ 25.632000] ACPI: Power Button (FF) [PWRF]
[ 25.680000] input: Lid Switch as /class/input/input8
[ 25.684000] ACPI: Lid Switch [LID]
[ 25.728000] input: Sleep Button (CM) as /class/input/input9
[ 25.736000] ACPI: Sleep Button (CM) [SBTN]
[ 25.776000] input: Power Button (CM) as /class/input/input10
[ 25.776000] ACPI: Power Button (CM) [PBTN]
[ 25.872000] ACPI: AC Adapter [AC] (on-line)
[ 25.920000] ACPI: Battery Slot [BAT0] (battery present)
[ 25.968000] ACPI: Video Device [VGA0] (multi-head: yes rom: no post: no)
[ 27.980000] eth0: link down
[ 31.416000] ppdev: user-space parallel port driver
[ 31.596000] audit(1200933247.433:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4726 profile="/usr/sbin/cupsd"
[ 31.668000] apm: BIOS not found.
[ 33.116000] Failure registering capabilities with primary security module.
[ 33.388000] Bluetooth: Core ver 2.11
[ 33.388000] NET: Registered protocol family 31
[ 33.388000] Bluetooth: HCI device and connection manager initialized
[ 33.388000] Bluetooth: HCI socket layer initialized
[ 33.412000] Bluetooth: L2CAP ver 2.8
[ 33.412000] Bluetooth: L2CAP socket layer initialized
[ 33.508000] Bluetooth: RFCOMM socket layer initialized
[ 33.508000] Bluetooth: RFCOMM TTY layer initialized
[ 33.508000] Bluetooth: RFCOMM ver 1.8
[ 35.584000] [drm] Initialized drm 1.1.0 20060810
[ 36.136000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
[ 36.136000] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 36.388000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 36.388000] agpgart: Device is in legacy mode, falling back to 2.x
[ 36.388000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode
[ 36.388000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode
[ 36.852000] uhci_hcd 0000:00:10.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
[ 157.396000] NET: Registered protocol family 17
[ 170.632000] NET: Registered protocol family 10
[ 170.632000] lo: Disabled Privacy Extensions
[ 170.632000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 181.276000] ath0: no IPv6 routers present
jordan@Jordan-Syer-0801:~$

Revision history for this message
naufal (musp-student) said :
#5

hello my dear friend,
try connect any devices to usb port and type in terminal
'lsusb'
please post the result...

Revision history for this message
jordyboy08 (jordansyer) said :
#6

is that an I or an L????

Revision history for this message
Vojtěch Trefný (vojtech.trefny) said :
#7

it's L (small letter)

Revision history for this message
Kaja (kajamohaideen-2003) said :
#8

Hi I am not able to connect my sonyericsion mobile on uubuntu. how to connect my mobile to ubuntu Via USPB port through data cable .
Plz help me

Revision history for this message
Kaja (kajamohaideen-2003) said :
#9

Hi everybody

I am not able to connect my sonyericsion mobile on uubuntu. how to connect my mobile to ubuntu Via USB port through data cable.
I am using smslib, RXTX,jre 1.5 for SMS server. I am not able to connect . how can i connect . i want steps.

Plz help me

Thanks and regards
Kaja Mohaideen.A

Revision history for this message
Kaja (kajamohaideen-2003) said :
#10

Hi to all
please tell me how can i send and receive message the mobile through USB cable
By
Kaja

Revision history for this message
naufal (musp-student) said :
#11

hello,
connect the phone cable to usb port and type in terminal:
lsusb
please post the result here.

Revision history for this message
Meltedfusion (emmanuelvlz) said :
#12

I am having the same issue. I just installed 8.04 and my usb ports wont work as well as my wireless card.
Any assistance will be greatly appreciated.
My specs are:
Toshiba A215 laptop with dual core 3 Gbs of ram
I put the usb stick in and opened up terminal and entered lsusb
the results was this.
Bus 006 Device 002: ID 04f2:b008 Chicony Electronics Co., Ltd
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

any replies pls post here.

Revision history for this message
Vikum (priyashakthi-vs-gmail) said :
#13

Im having a problem with USB.USB does not work. I have type "dmesg" in the terminal. This is what I got,

[ 19.298692] ACPI: bus type pnp registered
[ 19.322171] pnp: PnP ACPI: found 10 devices
[ 19.322174] ACPI: ACPI bus type pnp unregistered
[ 19.322177] PnPBIOS: Disabled by ACPI PNP
[ 19.322348] PCI: Using ACPI for IRQ routing
[ 19.322351] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 19.322356] PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
[ 19.322358] PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
[ 19.322361] PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0
[ 19.322363] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
[ 19.322365] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
[ 19.333970] NET: Registered protocol family 8
[ 19.333972] NET: Registered protocol family 20
[ 19.334030] AppArmor: AppArmor Filesystem Enabled
[ 19.337957] Time: tsc clocksource has been installed.
[ 19.345982] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 19.345985] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 19.345987] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 19.345994] system 00:08: ioport range 0x1080-0x1080 has been reserved
[ 19.345997] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 19.345999] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 19.346002] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 19.346004] system 00:08: ioport range 0xc00-0xc01 has been reserved
[ 19.346007] system 00:08: ioport range 0xc14-0xc14 has been reserved
[ 19.346009] system 00:08: ioport range 0xc50-0xc52 has been reserved
[ 19.346011] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[ 19.346014] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[ 19.346016] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[ 19.346019] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[ 19.346021] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[ 19.346023] system 00:08: ioport range 0x8000-0x805f has been reserved
[ 19.346026] system 00:08: ioport range 0xf40-0xf47 has been reserved
[ 19.346028] system 00:08: ioport range 0x280-0x293 has been reserved
[ 19.346031] system 00:08: ioport range 0x87f-0x87f has been reserved
[ 19.346036] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 19.346039] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 19.346041] system 00:09: iomem range 0x0-0xfff could not be reserved
[ 19.376358] PCI: Bridge: 0000:00:01.0
[ 19.376361] IO window: 9000-9fff
[ 19.376364] MEM window: d0100000-d01fffff
[ 19.376366] PREFETCH window: d4000000-d7ffffff
[ 19.376369] PCI: Bridge: 0000:00:04.0
[ 19.376370] IO window: disabled.
[ 19.376372] MEM window: disabled.
[ 19.376374] PREFETCH window: disabled.
[ 19.376376] PCI: Bridge: 0000:00:05.0
[ 19.376378] IO window: disabled.
[ 19.376380] MEM window: disabled.
[ 19.376382] PREFETCH window: disabled.
[ 19.376391] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[ 19.376393] IO window: 0000a400-0000a4ff
[ 19.376399] IO window: 0000a800-0000a8ff
[ 19.376404] PREFETCH window: 30000000-33ffffff
[ 19.376410] MEM window: 34000000-37ffffff
[ 19.376415] PCI: Bridge: 0000:00:14.4
[ 19.376418] IO window: a000-afff
[ 19.376424] MEM window: d0200000-d02fffff
[ 19.376428] PREFETCH window: disabled.
[ 19.376449] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 19.376456] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 19.376482] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 19.376497] NET: Registered protocol family 2
[ 19.413995] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 19.414189] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 19.414295] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 19.414398] TCP: Hash tables configured (established 16384 bind 16384)
[ 19.414401] TCP reno registered
[ 19.426023] checking if image is initramfs... it is
[ 19.877696] Switched to high resolution mode on CPU 0
[ 20.038209] Freeing initrd memory: 7708k freed
[ 20.038740] audit: initializing netlink socket (disabled)
[ 20.038753] audit(1221398471.292:1): initialized
[ 20.040324] VFS: Disk quotas dquot_6.5.1
[ 20.040384] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.040504] io scheduler noop registered
[ 20.040506] io scheduler anticipatory registered
[ 20.040508] io scheduler deadline registered
[ 20.040516] io scheduler cfq registered (default)
[ 20.040524] PCI: MSI quirk detected. MSI deactivated.
[ 20.040568] Boot video device is 0000:01:05.0
[ 20.040670] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 20.040690] assign_interrupt_mode Found MSI capability
[ 20.040692] Allocate Port Service[0000:00:04.0:pcie00]
[ 20.040750] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 20.040768] assign_interrupt_mode Found MSI capability
[ 20.040770] Allocate Port Service[0000:00:05.0:pcie00]
[ 20.040947] isapnp: Scanning for PnP cards...
[ 20.395333] isapnp: No Plug & Play device found
[ 20.419169] Real Time Clock Driver v1.12ac
[ 20.419262] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 20.420212] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 20.420267] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 20.420341] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 20.420662] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 20.420735] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.420739] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 20.420741] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 20.420743] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 20.420745] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 20.433436] mice: PS/2 mouse device common for all mice
[ 20.433534] EISA: Probing bus 0 at eisa.0
[ 20.433542] Cannot allocate resource for EISA slot 1
[ 20.433569] Cannot allocate resource for EISA slot 8
[ 20.433571] EISA: Detected 0 cards.
[ 20.433574] cpuidle: using governor ladder
[ 20.433576] cpuidle: using governor menu
[ 20.433657] NET: Registered protocol family 1
[ 20.433679] Using IPI No-Shortcut mode
[ 20.433709] registered taskstats version 1
[ 20.433808] Magic number: 8:271:382
[ 20.433988] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 20.433990] EDD information not available.
[ 20.434256] Freeing unused kernel memory: 368k freed
[ 20.436451] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 21.631934] fuse init (API version 7.9)
[ 21.650883] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 21.650901] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 21.664261] ACPI Exception (thermal-0471): AE_NOT_FOUND, Invalid active threshold [0] [20070126]
[ 21.672761] ACPI: Thermal Zone [THRM] (43 C)
[ 22.267021] usbcore: registered new interface driver usbfs
[ 22.267047] usbcore: registered new interface driver hub
[ 22.277866] usbcore: registered new device driver usb
[ 22.290205] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 22.290259] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 17
[ 22.290273] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 22.290542] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 22.290563] ohci_hcd 0000:00:13.0: irq 17, io mem 0xd0004000
[ 22.325533] SCSI subsystem initialized
[ 22.344401] usb usb1: configuration #1 chosen from 1 choice
[ 22.344425] hub 1-0:1.0: USB hub found
[ 22.344435] hub 1-0:1.0: 4 ports detected
[ 22.360275] libata version 3.00 loaded.
[ 22.388790] 8139too Fast Ethernet driver 0.9.28
[ 22.448303] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 17
[ 22.448319] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 22.448339] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 22.448356] ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0005000
[ 22.504285] usb usb2: configuration #1 chosen from 1 choice
[ 22.504311] hub 2-0:1.0: USB hub found
[ 22.504321] hub 2-0:1.0: 4 ports detected
[ 22.608327] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 17
[ 22.608343] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 22.608377] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 22.608431] ehci_hcd 0000:00:13.2: irq 17, io mem 0xd0006000
[ 22.620110] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 22.620263] usb usb3: configuration #1 chosen from 1 choice
[ 22.620283] hub 3-0:1.0: USB hub found
[ 22.620290] hub 3-0:1.0: 8 ports detected
[ 22.724207] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
[ 22.724258] PCI: Setting latency timer of device 0000:00:14.1 to 64
[ 22.725239] scsi0 : pata_atiixp
[ 22.725803] scsi1 : pata_atiixp
[ 22.726368] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
[ 22.726371] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
[ 23.007881] usb 3-4: new high speed USB device using ehci_hcd and address 2
[ 23.052655] ata1.00: ATA-5: IC25N030ATCS04-0, CA3OA71A, max UDMA/100
[ 23.052658] ata1.00: 58605120 sectors, multi 16: LBA
[ 23.052675] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PP02, max UDMA/33
[ 23.069117] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 23.069121] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 23.069904] ata1.00: configured for UDMA/100
[ 23.240239] ata1.01: configured for UDMA/33
[ 23.273000] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 23.273004] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 23.395802] scsi 0:0:0:0: Direct-Access ATA IC25N030ATCS04-0 CA3O PQ: 0 ANSI: 5
[ 23.399484] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PP02 PQ: 0 ANSI: 5
[ 23.400957] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 21 (level, low) -> IRQ 19
[ 23.402082] eth0: RealTek RTL8139 at 0xa000, 00:16:d4:54:d7:8d, IRQ 19
[ 23.402084] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 23.409826] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 23.409833] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 23.413509] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 23.421508] Driver 'sd' needs updating - please use bus_type methods
[ 23.421598] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
[ 23.421609] sd 0:0:0:0: [sda] Write Protect is off
[ 23.421611] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.421624] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.421665] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
[ 23.421672] sd 0:0:0:0: [sda] Write Protect is off
[ 23.421674] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.421685] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.421689] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 23.443891] sda1 sda2 < sda5 >
[ 23.470063] sd 0:0:0:0: [sda] Attached SCSI disk
[ 23.475210] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 23.475228] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 23.476888] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 23.476928] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 23.476942] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 23.476946] Uniform CD-ROM driver Revision: 3.20
[ 23.476984] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 23.680868] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 23.680877] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 23.729720] Attempting manual resume
[ 23.729724] swsusp: Resume From Partition 8:5
[ 23.729726] PM: Checking swsusp image.
[ 23.729935] PM: Resume from disk failed.
[ 23.780595] kjournald starting. Commit interval 5 seconds
[ 23.780608] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.884653] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 23.884660] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 23.884663] hub 3-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 23.940621] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 23.940628] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 24.144505] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 24.144534] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 24.348389] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 24.348395] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 24.552270] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 24.552277] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 24.756154] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 24.756162] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 24.756165] hub 3-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 24.812145] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 24.812151] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 25.016010] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 25.016017] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 25.219889] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 25.219897] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 25.423776] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 25.423789] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 25.627657] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 25.627664] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 25.627667] hub 3-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 25.683613] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 25.683616] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 25.887502] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 25.887525] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 26.091380] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 26.091383] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 26.295263] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 26.295266] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 26.499147] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 26.499149] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 26.499151] hub 3-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 40.042127] Linux agpgart interface v0.102
[ 40.124521] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 40.159881] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 40.445998] input: Power Button (FF) as /devices/virtual/input/input2
[ 40.457871] ACPI: Power Button (FF) [PWRF]
[ 40.457945] input: Lid Switch as /devices/virtual/input/input3
[ 40.458030] ACPI: Lid Switch [LID]
[ 40.458071] input: Power Button (CM) as /devices/virtual/input/input4
[ 40.473859] ACPI: Power Button (CM) [PWRB]
[ 40.473939] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 40.489847] ACPI: Sleep Button (CM) [SLPB]
[ 40.509891] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 40.642025] ACPI: WMI-Acer: Mapper loaded
[ 40.753036] ath_hal: module license 'Proprietary' taints kernel.
[ 40.801692] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 41.006135] Yenta: CardBus bridge found at 0000:06:04.0 [1025:009f]
[ 41.006166] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 41.006168] Yenta: Routing CardBus interrupts to PCI
[ 41.006174] Yenta TI: socket 0000:06:04.0, mfunc 0x90501212, devctl 0x44
[ 41.197471] wlan: 0.9.4
[ 41.240620] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[ 41.240625] Socket status: 30000006
[ 41.240628] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 41.240631] cs: IO port probe 0xa000-0xafff: clean.
[ 41.240822] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
[ 41.289543] ath_pci: 0.9.4
[ 41.333699] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 22 (level, low) -> IRQ 20
[ 42.118951] ACPI: AC Adapter [ACAD] (on-line)
[ 42.328808] sdhci: Secure Digital Host Controller Interface driver
[ 42.328813] sdhci: Copyright(c) Pierre Ossman
[ 42.563017] ACPI: Battery Slot [BAT1] (battery present)
[ 42.563510] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:20/LNXVIDEO:00/input/input6
[ 42.576649] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 42.577068] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:24/LNXVIDEO:01/input/input7
[ 42.592657] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 43.405261] [fglrx] Maximum main memory to use for locked dma buffers: 371 MBytes.
[ 43.405294] [fglrx] ASYNCIO init succeed!
[ 43.405403] [fglrx] PAT is enabled successfully!
[ 43.405878] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 43.480248] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 44.097136] acer_acpi: Acer Laptop ACPI Extras version 0.11.1
[ 44.097143] acer_acpi: Detected Acer WMID interface
[ 44.164152] ath_rate_sample: 1.2 (0.9.4)
[ 44.164555] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 44.164560] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 44.164568] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 44.164571] wifi0: mac 7.8 phy 4.5 radio 5.6
[ 44.164575] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 44.164577] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 44.164579] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 44.164580] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 44.164582] wifi0: Use hw queue 8 for CAB traffic
[ 44.164584] wifi0: Use hw queue 9 for beacons
[ 44.206360] wifi0: Atheros 5212: mem=0xd0200000, irq=20
[ 44.206491] sdhci: SDHCI controller found at 0000:06:04.2 [1524:0550] (rev 1)
[ 44.206520] ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 23 (level, low) -> IRQ 21
[ 44.206575] mmc0: SDHCI at 0xd0210800 irq 21 PIO
[ 44.206583] sdhci: SDHCI controller found at 0000:06:04.4 [1524:0551] (rev 1)
[ 44.206602] PCI: Enabling device 0000:06:04.4 (0000 -> 0002)
[ 44.206606] ACPI: PCI Interrupt 0000:06:04.4[B] -> GSI 23 (level, low) -> IRQ 21
[ 44.206640] mmc1: SDHCI at 0xd0210100 irq 21 PIO
[ 44.210411] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 18
[ 44.236275] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
[ 44.272510] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 44.297978] Registered led device: acer_acpi:mail
[ 45.515327] cs: IO port probe 0x100-0x3af: clean.
[ 45.517631] cs: IO port probe 0x3e0-0x4ff: clean.
[ 45.518584] cs: IO port probe 0x820-0x8ff: clean.
[ 45.519389] cs: IO port probe 0xc00-0xcf7: clean.
[ 45.520212] cs: IO port probe 0xa00-0xaff: clean.
[ 46.093251] lp: driver loaded but no devices found
[ 46.261495] Adding 1253028k swap on /dev/sda5. Priority:-1 extents:1 across:1253028k
[ 46.899993] EXT3 FS on sda1, internal journal
[ 47.065212] device-mapper: uevent: version 1.0.3
[ 47.065240] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: <email address hidden>
[ 48.641633] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 49.173297] No dock devices found.
[ 49.475718] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MK-36 processors (1 cpu cores) (version 2.20.00)
[ 49.475756] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x10
[ 49.475759] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12
[ 49.475761] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14
[ 49.475763] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x18
[ 50.752896] apm: BIOS not found.
[ 51.054472] ppdev: user-space parallel port driver
[ 51.287658] audit(1221398503.391:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4997 profile="/usr/sbin/cupsd" namespace="default"
[ 130.646556] Marking TSC unstable due to: cpufreq changes.
[ 130.648673] Time: acpi_pm clocksource has been installed.
[ 130.764692] Clocksource tsc unstable (delta = -71015481 ns)
[ 135.268709] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 135.477037] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 135.477056] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 135.528648] Bluetooth: Core ver 2.11
[ 135.529764] NET: Registered protocol family 31
[ 135.529773] Bluetooth: HCI device and connection manager initialized
[ 135.529781] Bluetooth: HCI socket layer initialized
[ 135.563750] Bluetooth: L2CAP ver 2.9
[ 135.563761] Bluetooth: L2CAP socket layer initialized
[ 135.639911] Bluetooth: RFCOMM socket layer initialized
[ 135.639941] Bluetooth: RFCOMM TTY layer initialized
[ 135.639945] Bluetooth: RFCOMM ver 1.8
[ 135.680974] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 135.680992] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 135.961713] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 135.961732] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 136.168705] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 136.168833] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 136.372884] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 136.372952] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 136.373001] hub 3-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 136.428851] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 136.428917] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 136.632817] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 136.632884] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 136.836753] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 136.836805] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 137.040726] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 137.040791] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 137.244680] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 137.244747] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 137.244795] hub 3-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 137.300675] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 137.300743] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 137.504622] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 137.504687] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 137.708585] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 137.708604] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 137.874324] NET: Registered protocol family 17
[ 137.912547] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 137.912563] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 138.116485] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 138.116504] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 138.116512] hub 3-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 138.172478] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 138.172577] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 138.376452] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 138.376474] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 138.580339] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 138.580357] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 138.784389] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 138.784409] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 138.848415] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 22
[ 138.988300] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 138.988319] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 138.988326] hub 3-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 139.833445] NET: Registered protocol family 10
[ 139.834442] lo: Disabled Privacy Extensions
[ 140.310675] QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
[ 140.310777] KQEMU installed, max_locked_mem=224568kB.
[ 56.645785] [fglrx] GART Table is not in FRAME_BUFFER range
[ 56.645796] [fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000
[ 56.645798] [fglrx] Reserve Block - 1 offset = 0X3ff5000 length = 0Xb000
[ 56.801424] Bridge firewalling registered
[ 56.801652] vbinat0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 56.908437] [fglrx] interrupt source 20008000 successfully enabled
[ 56.908445] [fglrx] enable ID = 0x00000004
[ 56.908738] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 71.700596] nf_conntrack version 0.5.0 (7168 buckets, 28672 max)
[ 152.933083] eth0: no IPv6 routers present
[ 153.101051] ath0: no IPv6 routers present
[ 154.776678] vbinat0: no IPv6 routers present
[ 63.653546] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 79.257823] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 198.449013] ISO 9660 Extensions: RRIP_1991A
[ 485.266184] usb 3-1: new high speed USB device using ehci_hcd and address 10
[ 485.327400] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 485.327406] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 485.531207] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 485.531216] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 485.734995] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 485.735108] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 485.938799] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 485.938809] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 972.910373] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 972.910392] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 972.910398] hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 972.966363] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 972.966383] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 973.170330] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 973.170349] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 973.374299] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 973.374318] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 973.578231] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 973.578250] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 973.782224] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 973.782243] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 973.782250] hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 973.838208] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 973.838246] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 974.042171] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 974.042189] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 974.246124] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 974.246142] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 974.450083] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 974.450099] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 974.654022] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 974.654040] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 974.654047] hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 974.710048] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 974.710067] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 974.913975] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 974.913995] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 975.117949] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 975.117968] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 975.324697] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 975.324786] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 390.175046] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 390.175059] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 390.175063] hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 390.176361] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 390.176364] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 528.235175] ehci_hcd 0000:00:13.2: port 1 reset error -110
[ 528.235183] hub 3-0:1.0: hub_port_status failed (err = -32)
[ 528.236473] ehci_hcd 0000:00:13.2: port 4 reset error -110
[ 528.236476] hub 3-0:1.0: hub_port_status failed (err = -32)

Please anyone can tell me, what I can do to solve this problem? Thank You!!!!

Can you help with this problem?

Provide an answer of your own, or ask jordyboy08 for more information if necessary.

To post a message you must log in.