Ekiga does not detect my webcam - can't get a picture on my Feisty 64AMD setup. Looking at previous posts, thought I would send the outputs below for a start. Can anyone help? richard@main-pc:~$ cd //dev richard@main-pc://dev$ ls -la /dev/video* crw-rw---- 1 root video 81, 0 2007-09-18 15:28 /dev/video0 crw-rw---- 1 root video 81, 1 2007-09-18 15:28 /dev/video1 richard@main-pc://dev$ id uid=1000(richard) gid=1000(richard) groups=4(adm),20(dialout),24(cdrom),25(floppy),29(audio),30(dip),44(video),46(plugdev),104(scanner),112(netdev),113(lpadmin),115(powerdev),117(admin),1000(richard) richard@main-pc://dev$ dmesg output: [ 23.906058] IO window: e000-efff [ 23.906060] MEM window: feb00000-febfffff [ 23.906063] PREFETCH window: c0000000-cfffffff [ 23.906070] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 23.906076] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 23.906081] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 23.906086] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 23.906091] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 23.906096] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 23.906174] NET: Registered protocol family 2 [ 23.942241] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 23.942675] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 23.944245] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 23.944634] TCP: Hash tables configured (established 262144 bind 65536) [ 23.944636] TCP reno registered [ 23.954292] checking if image is initramfs... it is [ 24.553152] Freeing initrd memory: 6827k freed [ 24.556565] audit: initializing netlink socket (disabled) [ 24.556577] audit(1190129333.316:1): initialized [ 24.556733] VFS: Disk quotas dquot_6.5.1 [ 24.556750] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 24.556788] io scheduler noop registered [ 24.556790] io scheduler anticipatory registered [ 24.556792] io scheduler deadline registered [ 24.556804] io scheduler cfq registered (default) [ 25.082236] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 25.082255] assign_interrupt_mode Found MSI capability [ 25.082257] Allocate Port Service[0000:00:0b.0:pcie00] [ 25.082314] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 25.082331] assign_interrupt_mode Found MSI capability [ 25.082333] Allocate Port Service[0000:00:0c.0:pcie00] [ 25.082386] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 25.082403] assign_interrupt_mode Found MSI capability [ 25.082405] Allocate Port Service[0000:00:0d.0:pcie00] [ 25.082455] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 25.082472] assign_interrupt_mode Found MSI capability [ 25.082474] Allocate Port Service[0000:00:0e.0:pcie00] [ 25.082524] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 25.082541] assign_interrupt_mode Found MSI capability [ 25.082543] Allocate Port Service[0000:00:0f.0:pcie00] [ 25.103876] Real Time Clock Driver v1.12ac [ 25.103916] Linux agpgart interface v0.102 (c) Dave Jones [ 25.103918] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 25.104027] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 25.104153] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 25.104533] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 25.104725] mice: PS/2 mouse device common for all mice [ 25.105217] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 25.105346] input: Macintosh mouse button emulation as /class/input/input0 [ 25.105378] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 25.105381] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 25.105532] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 25.107882] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 25.107888] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 25.107970] TCP cubic registered [ 25.107979] NET: Registered protocol family 1 [ 25.108081] ACPI: (supports S0 S1 S3 S4 S5) [ 25.108121] Magic number: 7:886:487 [ 25.108218] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 25.108276] Freeing unused kernel memory: 304k freed [ 26.263443] Capability LSM initialized [ 26.651841] usbcore: registered new interface driver usbfs [ 26.651860] usbcore: registered new interface driver hub [ 26.651881] usbcore: registered new device driver usb [ 26.652555] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 26.652946] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 26.652954] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 26.652967] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 26.652970] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 26.653064] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 26.653079] ohci_hcd 0000:00:02.0: irq 23, io mem 0xf9ffb000 [ 26.662822] SCSI subsystem initialized [ 26.692134] libata version 2.20 loaded. [ 26.693067] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. [ 26.716209] usb usb1: configuration #1 chosen from 1 choice [ 26.716232] hub 1-0:1.0: USB hub found [ 26.716241] hub 1-0:1.0: 10 ports detected [ 26.767067] ieee1394: Initialized config rom entry `ip1394' [ 26.822402] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 26.822413] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 26.822426] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 26.822429] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 26.822453] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 26.822476] ehci_hcd 0000:00:02.1: debug port 1 [ 26.822479] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 26.822490] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9ffac00 [ 26.822496] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 26.822555] usb usb2: configuration #1 chosen from 1 choice [ 26.822575] hub 2-0:1.0: USB hub found [ 26.822581] hub 2-0:1.0: 10 ports detected [ 26.930336] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 [ 26.930346] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 21 [ 26.930351] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 26.930359] forcedeth: using HIGHDMA [ 27.453977] eth0: forcedeth.c: subsystem: 01462:7250 bound to 0000:00:08.0 [ 27.454364] ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 20 [ 27.454372] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 20 (level, low) -> IRQ 20 [ 27.454377] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 27.454384] forcedeth: using HIGHDMA [ 27.977892] eth1: forcedeth.c: subsystem: 01462:7250 bound to 0000:00:09.0 [ 27.978010] sata_nv 0000:00:05.0: version 3.3 [ 27.978406] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 27.978409] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 27.978428] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 27.978783] ata1: SATA max UDMA/133 cmd 0x000000000001c480 ctl 0x000000000001c402 bmdma 0x000000000001bc00 irq 23 [ 27.979063] ata2: SATA max UDMA/133 cmd 0x000000000001c080 ctl 0x000000000001c002 bmdma 0x000000000001bc08 irq 23 [ 27.979070] scsi0 : sata_nv [ 28.161603] usb 2-8: new high speed USB device using ehci_hcd and address 5 [ 28.433704] usb 2-8: configuration #1 chosen from 1 choice [ 28.449621] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 28.457764] ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168 [ 28.457770] ata1.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7 [ 28.457773] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 28.481738] ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168 [ 28.481741] ata1.00: configured for UDMA/133 [ 28.481750] scsi1 : sata_nv [ 28.741527] usb 1-2: new low speed USB device using ohci_hcd and address 2 [ 28.946831] usb 1-2: configuration #1 chosen from 1 choice [ 28.953553] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 28.961761] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168 [ 28.961767] ata2.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7 [ 28.961770] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 28.989674] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168 [ 28.989679] ata2.00: configured for UDMA/133 [ 28.989773] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 [ 28.990086] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 [ 28.990712] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22 [ 28.990714] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSA1] -> GSI 22 (level, low) -> IRQ 22 [ 28.990735] PCI: Setting latency timer of device 0000:00:05.1 to 64 [ 28.990774] ata3: SATA max UDMA/133 cmd 0x000000000001b880 ctl 0x000000000001b802 bmdma 0x000000000001b080 irq 22 [ 28.990801] ata4: SATA max UDMA/133 cmd 0x000000000001b480 ctl 0x000000000001b402 bmdma 0x000000000001b088 irq 22 [ 28.990809] scsi2 : sata_nv [ 29.257462] usb 1-3: new low speed USB device using ohci_hcd and address 3 [ 29.305477] ata3: SATA link down (SStatus 0 SControl 300) [ 29.315736] ATA: abnormal status 0x7F on port 0x000000000001b887 [ 29.315723] scsi3 : sata_nv [ 29.629433] ata4: SATA link down (SStatus 0 SControl 300) [ 29.639693] ATA: abnormal status 0x7F on port 0x000000000001b487 [ 29.640504] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21 [ 29.640508] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 21 (level, low) -> IRQ 21 [ 29.640528] PCI: Setting latency timer of device 0000:00:05.2 to 64 [ 29.640564] ata5: SATA max UDMA/133 cmd 0x000000000001b000 ctl 0x000000000001ac02 bmdma 0x000000000001a480 irq 21 [ 29.640591] ata6: SATA max UDMA/133 cmd 0x000000000001a880 ctl 0x000000000001a802 bmdma 0x000000000001a488 irq 21 [ 29.640603] scsi4 : sata_nv [ 29.953390] ata5: SATA link down (SStatus 0 SControl 300) [ 29.963649] ATA: abnormal status 0x7F on port 0x000000000001b007 [ 29.963635] scsi5 : sata_nv [ 30.277349] ata6: SATA link down (SStatus 0 SControl 300) [ 30.287607] ATA: abnormal status 0x7F on port 0x000000000001a887 [ 30.288530] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19 [ 30.288538] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKD] -> GSI 19 (level, low) -> IRQ 19 [ 30.342880] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 30.349944] NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0 [ 30.349960] NFORCE-MCP55: chipset revision 161 [ 30.349962] NFORCE-MCP55: not 100% native mode: will probe irqs later [ 30.349967] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller [ 30.349974] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio [ 30.349983] Probing IDE interface ide0... [ 30.366126] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 30.366145] sda: Write Protect is off [ 30.366147] sda: Mode Sense: 00 3a 00 00 [ 30.366161] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.366213] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 30.366220] sda: Write Protect is off [ 30.366222] sda: Mode Sense: 00 3a 00 00 [ 30.366234] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.366237] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 [ 30.404042] sd 0:0:0:0: Attached scsi disk sda [ 30.404910] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) [ 30.404920] sdb: Write Protect is off [ 30.404922] sdb: Mode Sense: 00 3a 00 00 [ 30.404934] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.404969] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) [ 30.404976] sdb: Write Protect is off [ 30.404978] sdb: Mode Sense: 00 3a 00 00 [ 30.404990] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.404992] sdb: sdb1 sdb2 < sdb5 sdb6 > [ 30.451321] sd 1:0:0:0: Attached scsi disk sdb [ 30.454676] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 30.454694] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 30.619334] Attempting manual resume [ 30.619338] swsusp: Resume From Partition 8:22 [ 30.619339] PM: Checking swsusp image. [ 30.619521] PM: Resume from disk failed. [ 30.632295] EXT3-fs: INFO: recovery required on readonly filesystem. [ 30.632298] EXT3-fs: write access will be enabled during recovery. [ 30.818583] usb 1-3: configuration #1 chosen from 1 choice [ 31.089290] hda: HL-DT-ST DVDRAM GSA-H10N, ATAPI CD/DVD-ROM drive [ 31.129217] usb 1-4: new full speed USB device using ohci_hcd and address 4 [ 31.321425] usb 1-4: not running at top speed; connect to a high speed hub [ 31.336499] usb 1-4: configuration #1 chosen from 1 choice [ 31.351554] usbcore: registered new interface driver hiddev [ 31.412510] input: Logitech USB Receiver as /class/input/input1 [ 31.412521] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-2 [ 31.422531] input: Logitech USB Receiver as /class/input/input2 [ 31.422567] input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2 [ 31.422590] usbcore: registered new interface driver usbhid [ 31.422592] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 31.425965] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 31.438463] hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 31.438471] Uniform CD-ROM driver Revision: 3.20 [ 31.625288] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000cf8177] [ 32.299307] kjournald starting. Commit interval 5 seconds [ 32.299321] EXT3-fs: sdb1: orphan cleanup on readonly fs [ 32.309661] ext3_orphan_cleanup: deleting unreferenced inode 2016188 [ 32.319690] EXT3-fs: sdb1: 1 orphan inode deleted [ 32.319692] EXT3-fs: recovery complete. [ 32.330376] EXT3-fs: mounted filesystem with ordered data mode. [ 39.300585] NET: Registered protocol family 10 [ 39.300681] lo: Disabled Privacy Extensions [ 40.501625] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2d00 [ 40.501656] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2e00 [ 40.653051] Linux video capture interface: v2.00 [ 40.780127] input: PC Speaker as /class/input/input3 [ 40.791933] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 40.801289] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 40.827962] cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded [ 40.828034] CORE cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected] [ 40.828037] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe [ 40.910231] cx2388x v4l2 driver version 0.0.6 loaded [ 40.975623] tveeprom 2-0050: Hauppauge model 92001, rev C1B1, serial# 800219 [ 40.975627] tveeprom 2-0050: MAC address is 00-0D-FE-0C-35-DB [ 40.975630] tveeprom 2-0050: tuner model is Conexant_CX24109 (idx 111, type 4) [ 40.975633] tveeprom 2-0050: TV standards ATSC/DVB Digital (eeprom 0x80) [ 40.975635] tveeprom 2-0050: audio processor is CX883 (idx 32) [ 40.975638] tveeprom 2-0050: decoder processor is CX883 (idx 22) [ 40.975640] tveeprom 2-0050: has no radio, has IR receiver, has no IR transmitter [ 40.975642] cx88[0]: hauppauge eeprom: model=92001 [ 40.981250] input: cx88 IR (Hauppauge Nova-S-Plus as /class/input/input4 [ 40.981281] cx88[0]/2: cx2388x 8802 Driver Manager [ 40.981740] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18 [ 40.981749] ACPI: PCI Interrupt 0000:01:00.2[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 18 [ 40.981757] cx88[0]/2: found at 0000:01:00.2, rev: 5, irq: 18, latency: 64, mmio: 0xfb000000 [ 40.981791] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 18 [ 40.981799] cx88[0]/0: found at 0000:01:00.0, rev: 5, irq: 18, latency: 64, mmio: 0xfd000000 [ 40.981823] cx88[0]/0: registered device video0 [v4l2] [ 40.981839] cx88[0]/0: registered device vbi0 [ 41.103952] uvcvideo: Found UVC 1.00 device (046d:08ce) [ 41.104479] usbcore: registered new interface driver xpad [ 41.104483] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6 [ 41.105372] parport: PnPBIOS parport detected. [ 41.105416] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 41.134553] usbcore: registered new interface driver uvcvideo [ 41.134558] USB Video Class driver (v0.1.0) [ 41.210226] cx2388x alsa driver version 0.0.6 loaded [ 41.210268] ACPI: PCI Interrupt 0000:01:00.1[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 18 [ 41.210291] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 41.324862] irda_init() [ 41.324877] NET: Registered protocol family 23 [ 41.425273] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20 [ 41.425277] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 20 (level, low) -> IRQ 20 [ 41.425299] PCI: Setting latency timer of device 0000:00:06.1 to 64 [ 41.580238] usbcore: registered new interface driver snd-usb-audio [ 41.580410] input: Yealink usb-p1k as /class/input/input5 [ 41.595007] usbcore: registered new interface driver yealink [ 41.595011] drivers/usb/input/yealink.c: Yealink phone driver:yld-20051230 [ 41.635775] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 41.847703] fuse init (API version 7.8) [ 41.880421] lp0: using parport0 (interrupt-driven). [ 42.084982] Adding 8787512k swap on /dev/disk/by-uuid/d7adfb31-ca6c-4c2f-a96b-b1367f6cc888. Priority:-1 extents:1 across:8787512k [ 42.255983] EXT3 FS on sdb1, internal journal [ 49.602676] eth0: no IPv6 routers present [ 49.751580] kjournald starting. Commit interval 5 seconds [ 49.751715] EXT3 FS on sdb5, internal journal [ 49.751719] EXT3-fs: mounted filesystem with ordered data mode. [ 49.789319] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 49.851482] NTFS volume version 3.1. [ 49.899094] ReiserFS: sda3: found reiserfs format "3.6" with standard journal [ 49.899104] ReiserFS: sda3: using ordered data mode [ 49.904179] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 49.905039] ReiserFS: sda3: checking transaction log (sda3) [ 49.923744] ReiserFS: sda3: Using r5 hash to sort names [ 49.968868] NTFS volume version 3.1. [ 49.991591] NTFS volume version 3.1. [ 50.014082] NTFS volume version 3.1. [ 51.325913] NET: Registered protocol family 17 [ 56.955503] ibm_acpi: ec object not found [ 56.992926] Using specific hotkey driver [ 57.019178] No dock devices found. [ 57.066460] input: Power Button (FF) as /class/input/input6 [ 57.066481] ACPI: Power Button (FF) [PWRF] [ 57.066525] input: Power Button (CM) as /class/input/input7 [ 57.066539] ACPI: Power Button (CM) [PWRB] [ 57.123722] pcc_acpi: loading... [ 57.316979] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (version 2.00.00) [ 57.316949] powernow-k8: MP systems not supported by PSB BIOS structure [ 57.317015] powernow-k8: MP systems not supported by PSB BIOS structure [ 60.878509] cdrom: This disc doesn't have any tracks I recognize! [ 63.547598] ppdev: user-space parallel port driver [ 64.316468] Installing knfsd (copyright (C) 1996 ). [ 64.450306] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 64.450660] NFSD: starting 90-second grace period [ 65.138290] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining [ 65.402311] Bluetooth: Core ver 2.11 [ 65.402364] NET: Registered protocol family 31 [ 65.402366] Bluetooth: HCI device and connection manager initialized [ 65.402370] Bluetooth: HCI socket layer initialized [ 65.429967] Bluetooth: L2CAP ver 2.8 [ 65.429976] Bluetooth: L2CAP socket layer initialized [ 65.489048] Bluetooth: RFCOMM socket layer initialized [ 65.489062] Bluetooth: RFCOMM TTY layer initialized [ 65.489063] Bluetooth: RFCOMM ver 1.8 [ 71.863779] eth1: no IPv6 routers present [ 1060.972392] hda: DMA timeout retry [ 1060.972396] hda: timeout waiting for DMA [ 1065.972669] hda: status timeout: status=0xd0 { Busy } [ 1065.972673] ide: failed opcode was: unknown [ 1065.972678] hda: drive not ready for command [ 1070.443068] BUG: soft lockup detected on CPU#0! [ 1070.443071] [ 1070.443072] Call Trace: [ 1070.443074] [] softlockup_tick+0xfa/0x120 [ 1070.443107] [] update_process_times+0x57/0x90 [ 1070.443116] [] smp_local_timer_interrupt+0x34/0x60 [ 1070.443122] [] smp_apic_timer_interrupt+0x59/0x80 [ 1070.443131] [] apic_timer_interrupt+0x66/0x70 [ 1070.443136] [] ide_outb+0x0/0x10 [ 1070.443150] [] ide_inb+0x4/0x10 [ 1070.443159] [] ide_wait_stat+0xd3/0x160 [ 1070.443170] [] ide_do_request+0x44a/0xa00 [ 1070.443173] [] __unmask_IO_APIC_irq+0x53/0x90 [ 1070.443179] [] unmask_IO_APIC_irq+0x28/0x50 [ 1070.443186] [] default_enable+0x18/0x30 [ 1070.443190] [] check_irq_resend+0x24/0x90 [ 1070.443203] [] ide_timer_expiry+0x2e1/0x320 [ 1070.443211] [] ide_timer_expiry+0x0/0x320 [ 1070.443217] [] run_timer_softirq+0x142/0x1c0 [ 1070.443228] [] __do_softirq+0x5f/0xd0 [ 1070.443237] [] call_softirq+0x1c/0x28 [ 1070.443244] [] do_softirq+0x2c/0x90 [ 1070.443249] [] smp_apic_timer_interrupt+0x5e/0x80 [ 1070.443254] [] default_idle+0x0/0x50 [ 1070.443257] [] default_idle+0x0/0x50 [ 1070.443262] [] apic_timer_interrupt+0x66/0x70 [ 1070.443265] [] unix_poll+0x0/0xa0 [ 1070.443282] [] default_idle+0x29/0x50 [ 1070.443290] [] cpu_idle+0x9b/0xd0 [ 1070.443298] [] start_kernel+0x24a/0x260 [ 1070.443305] [] _sinittext+0x163/0x170 [ 1070.443312] [ 1070.976206] hda: status timeout: status=0xd0 { Busy } [ 1070.976209] ide: failed opcode was: unknown [ 1070.976213] hda: drive not ready for command [ 1075.979743] hda: status timeout: status=0xd0 { Busy } [ 1075.979747] ide: failed opcode was: unknown [ 1075.979751] hda: drive not ready for command [ 1080.983281] hda: status timeout: status=0xd0 { Busy } [ 1080.983284] ide: failed opcode was: unknown [ 1080.983288] hda: drive not ready for command [ 1085.986819] hda: status timeout: status=0xd0 { Busy } [ 1085.986822] ide: failed opcode was: unknown [ 1085.986826] hda: drive not ready for command [ 1090.990356] hda: status timeout: status=0xd0 { Busy } [ 1090.990359] ide: failed opcode was: unknown [ 1090.990363] hda: drive not ready for command [ 1095.993893] hda: status timeout: status=0xd0 { Busy } [ 1095.993896] ide: failed opcode was: unknown [ 1095.993900] hda: drive not ready for command [ 1100.997431] hda: status timeout: status=0xd0 { Busy } [ 1100.997434] ide: failed opcode was: unknown [ 1100.997438] hda: drive not ready for command [ 1106.000969] hda: status timeout: status=0xd0 { Busy } [ 1106.000972] ide: failed opcode was: unknown [ 1106.000976] hda: drive not ready for command [ 1111.004506] hda: status timeout: status=0xd0 { Busy } [ 1111.004509] ide: failed opcode was: unknown [ 1111.004513] hda: drive not ready for command [ 1116.008043] hda: status timeout: status=0xd0 { Busy } [ 1116.008046] ide: failed opcode was: unknown [ 1116.008050] hda: drive not ready for command [ 1121.011581] hda: status timeout: status=0xd0 { Busy } [ 1121.011584] ide: failed opcode was: unknown [ 1121.011588] hda: drive not ready for command [ 1126.015118] hda: status timeout: status=0xd0 { Busy } [ 1126.015122] ide: failed opcode was: unknown [ 1126.015125] hda: drive not ready for command [ 1131.018656] hda: status timeout: status=0xd0 { Busy } [ 1131.018659] ide: failed opcode was: unknown [ 1131.018663] hda: drive not ready for command [ 1136.022194] hda: status timeout: status=0xd0 { Busy } [ 1136.022197] ide: failed opcode was: unknown [ 1136.022201] hda: drive not ready for command [ 1141.025731] hda: status timeout: status=0xd0 { Busy } [ 1141.025734] ide: failed opcode was: unknown [ 1141.025738] hda: drive not ready for command [ 1146.029269] hda: status timeout: status=0xd0 { Busy } [ 1146.029272] ide: failed opcode was: unknown [ 1146.029275] hda: drive not ready for command [ 1151.032806] hda: status timeout: status=0xd0 { Busy } [ 1151.032810] ide: failed opcode was: unknown [ 1151.032813] hda: drive not ready for command [ 1156.036344] hda: status timeout: status=0xd0 { Busy } [ 1156.036347] ide: failed opcode was: unknown [ 1156.036351] hda: drive not ready for command [ 1161.039881] hda: status timeout: status=0xd0 { Busy } [ 1161.039885] ide: failed opcode was: unknown [ 1161.039888] hda: drive not ready for command [ 1166.043418] hda: status timeout: status=0xd0 { Busy } [ 1166.043421] ide: failed opcode was: unknown [ 1166.043425] hda: drive not ready for command [ 1171.046956] hda: status timeout: status=0xd0 { Busy } [ 1171.046960] ide: failed opcode was: unknown [ 1171.046964] hda: drive not ready for command [ 1176.050493] hda: status timeout: status=0xd0 { Busy } [ 1176.050497] ide: failed opcode was: unknown [ 1176.050500] hda: drive not ready for command [ 1181.054032] hda: status timeout: status=0xd0 { Busy } [ 1181.054035] ide: failed opcode was: unknown [ 1181.054038] hda: drive not ready for command [ 1186.057569] hda: status timeout: status=0xd0 { Busy } [ 1186.057572] ide: failed opcode was: unknown [ 1186.057576] hda: drive not ready for command [ 1191.061106] hda: status timeout: status=0xd0 { Busy } [ 1191.061110] ide: failed opcode was: unknown [ 1191.061113] hda: drive not ready for command [ 1196.064643] hda: status timeout: status=0xd0 { Busy } [ 1196.064647] ide: failed opcode was: unknown [ 1196.064650] hda: drive not ready for command [ 1201.068181] hda: status timeout: status=0xd0 { Busy } [ 1201.068185] ide: failed opcode was: unknown [ 1201.068188] hda: drive not ready for command [ 1206.071719] hda: status timeout: status=0xd0 { Busy } [ 1206.071722] ide: failed opcode was: unknown [ 1206.071725] hda: drive not ready for command [ 1211.075256] hda: status timeout: status=0xd0 { Busy } [ 1211.075259] ide: failed opcode was: unknown [ 1211.075263] hda: drive not ready for command [ 1216.078794] hda: status timeout: status=0xd0 { Busy } [ 1216.078797] ide: failed opcode was: unknown [ 1216.078801] hda: drive not ready for command [ 2805.865027] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -32 (exp. 26). [ 2805.866275] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -32 (exp. 26). [ 2806.867055] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 2811.994339] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 2812.994237] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 2813.994258] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 2821.093078] uvcvideo: Button event (1). [ 2821.333040] uvcvideo: Button event (0). [ 2821.525012] uvcvideo: Button event (1). [ 2822.084931] uvcvideo: Button event (0). [ 2825.264639] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 2826.264660] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 2827.264557] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 2831.304006] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 2832.303902] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 2833.307797] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 2877.925761] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 2878.925662] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 2879.925559] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 3014.775108] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 3015.775006] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 3016.774901] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 3026.189686] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 3028.437400] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 3030.717104] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 3698.157467] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 3699.157365] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 3700.157259] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 3721.766362] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 3734.264694] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 3735.264586] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 3739.352152] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26). [ 3743.571565] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).

When	Who	Action	New State
2007-09-18	Jayotis Diggory	Answer	Answered
2007-09-19	rikmik	Reopen	Open
2007-09-20	Jayotis Diggory	Answer	Answered

Ubuntuekiga package

History of question #13615

Ubuntu
ekiga package