Ekiga does not detect Logitech Quickcam Pro 5000

Ekiga does not detect my webcam - can't get a picture on my Feisty 64AMD setup.
Looking at previous posts, thought I would send the outputs below for a start. Can anyone help?

richard@main-pc:~$ cd //dev
richard@main-pc://dev$ ls -la /dev/video*
crw-rw---- 1 root video 81, 0 2007-09-18 15:28 /dev/video0
crw-rw---- 1 root video 81, 1 2007-09-18 15:28 /dev/video1
richard@main-pc://dev$ id
uid=1000(richard) gid=1000(richard) groups=4(adm),20(dialout),24(cdrom),25(floppy),29(audio),30(dip),44(video),46(plugdev),104(scanner),112(netdev),113(lpadmin),115(powerdev),117(admin),1000(richard)
richard@main-pc://dev$

dmesg output:

[ 23.906058] IO window: e000-efff
[ 23.906060] MEM window: feb00000-febfffff
[ 23.906063] PREFETCH window: c0000000-cfffffff
[ 23.906070] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 23.906076] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 23.906081] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 23.906086] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 23.906091] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 23.906096] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 23.906174] NET: Registered protocol family 2
[ 23.942241] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 23.942675] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 23.944245] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 23.944634] TCP: Hash tables configured (established 262144 bind 65536)
[ 23.944636] TCP reno registered
[ 23.954292] checking if image is initramfs... it is
[ 24.553152] Freeing initrd memory: 6827k freed
[ 24.556565] audit: initializing netlink socket (disabled)
[ 24.556577] audit(1190129333.316:1): initialized
[ 24.556733] VFS: Disk quotas dquot_6.5.1
[ 24.556750] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 24.556788] io scheduler noop registered
[ 24.556790] io scheduler anticipatory registered
[ 24.556792] io scheduler deadline registered
[ 24.556804] io scheduler cfq registered (default)
[ 25.082236] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 25.082255] assign_interrupt_mode Found MSI capability
[ 25.082257] Allocate Port Service[0000:00:0b.0:pcie00]
[ 25.082314] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 25.082331] assign_interrupt_mode Found MSI capability
[ 25.082333] Allocate Port Service[0000:00:0c.0:pcie00]
[ 25.082386] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 25.082403] assign_interrupt_mode Found MSI capability
[ 25.082405] Allocate Port Service[0000:00:0d.0:pcie00]
[ 25.082455] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 25.082472] assign_interrupt_mode Found MSI capability
[ 25.082474] Allocate Port Service[0000:00:0e.0:pcie00]
[ 25.082524] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 25.082541] assign_interrupt_mode Found MSI capability
[ 25.082543] Allocate Port Service[0000:00:0f.0:pcie00]
[ 25.103876] Real Time Clock Driver v1.12ac
[ 25.103916] Linux agpgart interface v0.102 (c) Dave Jones
[ 25.103918] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 25.104027] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 25.104153] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 25.104533] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 25.104725] mice: PS/2 mouse device common for all mice
[ 25.105217] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 25.105346] input: Macintosh mouse button emulation as /class/input/input0
[ 25.105378] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 25.105381] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 25.105532] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 25.107882] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 25.107888] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 25.107970] TCP cubic registered
[ 25.107979] NET: Registered protocol family 1
[ 25.108081] ACPI: (supports S0 S1 S3 S4 S5)
[ 25.108121] Magic number: 7:886:487
[ 25.108218] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 25.108276] Freeing unused kernel memory: 304k freed
[ 26.263443] Capability LSM initialized
[ 26.651841] usbcore: registered new interface driver usbfs
[ 26.651860] usbcore: registered new interface driver hub
[ 26.651881] usbcore: registered new device driver usb
[ 26.652555] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 26.652946] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 26.652954] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 26.652967] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 26.652970] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 26.653064] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 26.653079] ohci_hcd 0000:00:02.0: irq 23, io mem 0xf9ffb000
[ 26.662822] SCSI subsystem initialized
[ 26.692134] libata version 2.20 loaded.
[ 26.693067] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[ 26.716209] usb usb1: configuration #1 chosen from 1 choice
[ 26.716232] hub 1-0:1.0: USB hub found
[ 26.716241] hub 1-0:1.0: 10 ports detected
[ 26.767067] ieee1394: Initialized config rom entry `ip1394'
[ 26.822402] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 26.822413] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 26.822426] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 26.822429] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 26.822453] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 26.822476] ehci_hcd 0000:00:02.1: debug port 1
[ 26.822479] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 26.822490] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9ffac00
[ 26.822496] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 26.822555] usb usb2: configuration #1 chosen from 1 choice
[ 26.822575] hub 2-0:1.0: USB hub found
[ 26.822581] hub 2-0:1.0: 10 ports detected
[ 26.930336] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[ 26.930346] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 21
[ 26.930351] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 26.930359] forcedeth: using HIGHDMA
[ 27.453977] eth0: forcedeth.c: subsystem: 01462:7250 bound to 0000:00:08.0
[ 27.454364] ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 20
[ 27.454372] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 20 (level, low) -> IRQ 20
[ 27.454377] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 27.454384] forcedeth: using HIGHDMA
[ 27.977892] eth1: forcedeth.c: subsystem: 01462:7250 bound to 0000:00:09.0
[ 27.978010] sata_nv 0000:00:05.0: version 3.3
[ 27.978406] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 27.978409] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 27.978428] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 27.978783] ata1: SATA max UDMA/133 cmd 0x000000000001c480 ctl 0x000000000001c402 bmdma 0x000000000001bc00 irq 23
[ 27.979063] ata2: SATA max UDMA/133 cmd 0x000000000001c080 ctl 0x000000000001c002 bmdma 0x000000000001bc08 irq 23
[ 27.979070] scsi0 : sata_nv
[ 28.161603] usb 2-8: new high speed USB device using ehci_hcd and address 5
[ 28.433704] usb 2-8: configuration #1 chosen from 1 choice
[ 28.449621] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 28.457764] ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 28.457770] ata1.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
[ 28.457773] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 28.481738] ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 28.481741] ata1.00: configured for UDMA/133
[ 28.481750] scsi1 : sata_nv
[ 28.741527] usb 1-2: new low speed USB device using ohci_hcd and address 2
[ 28.946831] usb 1-2: configuration #1 chosen from 1 choice
[ 28.953553] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 28.961761] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 28.961767] ata2.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
[ 28.961770] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 28.989674] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 28.989679] ata2.00: configured for UDMA/133
[ 28.989773] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
[ 28.990086] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
[ 28.990712] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[ 28.990714] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSA1] -> GSI 22 (level, low) -> IRQ 22
[ 28.990735] PCI: Setting latency timer of device 0000:00:05.1 to 64
[ 28.990774] ata3: SATA max UDMA/133 cmd 0x000000000001b880 ctl 0x000000000001b802 bmdma 0x000000000001b080 irq 22
[ 28.990801] ata4: SATA max UDMA/133 cmd 0x000000000001b480 ctl 0x000000000001b402 bmdma 0x000000000001b088 irq 22
[ 28.990809] scsi2 : sata_nv
[ 29.257462] usb 1-3: new low speed USB device using ohci_hcd and address 3
[ 29.305477] ata3: SATA link down (SStatus 0 SControl 300)
[ 29.315736] ATA: abnormal status 0x7F on port 0x000000000001b887
[ 29.315723] scsi3 : sata_nv
[ 29.629433] ata4: SATA link down (SStatus 0 SControl 300)
[ 29.639693] ATA: abnormal status 0x7F on port 0x000000000001b487
[ 29.640504] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21
[ 29.640508] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 21 (level, low) -> IRQ 21
[ 29.640528] PCI: Setting latency timer of device 0000:00:05.2 to 64
[ 29.640564] ata5: SATA max UDMA/133 cmd 0x000000000001b000 ctl 0x000000000001ac02 bmdma 0x000000000001a480 irq 21
[ 29.640591] ata6: SATA max UDMA/133 cmd 0x000000000001a880 ctl 0x000000000001a802 bmdma 0x000000000001a488 irq 21
[ 29.640603] scsi4 : sata_nv
[ 29.953390] ata5: SATA link down (SStatus 0 SControl 300)
[ 29.963649] ATA: abnormal status 0x7F on port 0x000000000001b007
[ 29.963635] scsi5 : sata_nv
[ 30.277349] ata6: SATA link down (SStatus 0 SControl 300)
[ 30.287607] ATA: abnormal status 0x7F on port 0x000000000001a887
[ 30.288530] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19
[ 30.288538] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKD] -> GSI 19 (level, low) -> IRQ 19
[ 30.342880] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 30.349944] NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0
[ 30.349960] NFORCE-MCP55: chipset revision 161
[ 30.349962] NFORCE-MCP55: not 100% native mode: will probe irqs later
[ 30.349967] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
[ 30.349974] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
[ 30.349983] Probing IDE interface ide0...
[ 30.366126] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 30.366145] sda: Write Protect is off
[ 30.366147] sda: Mode Sense: 00 3a 00 00
[ 30.366161] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.366213] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 30.366220] sda: Write Protect is off
[ 30.366222] sda: Mode Sense: 00 3a 00 00
[ 30.366234] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.366237] sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[ 30.404042] sd 0:0:0:0: Attached scsi disk sda
[ 30.404910] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
[ 30.404920] sdb: Write Protect is off
[ 30.404922] sdb: Mode Sense: 00 3a 00 00
[ 30.404934] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.404969] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
[ 30.404976] sdb: Write Protect is off
[ 30.404978] sdb: Mode Sense: 00 3a 00 00
[ 30.404990] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.404992] sdb: sdb1 sdb2 < sdb5 sdb6 >
[ 30.451321] sd 1:0:0:0: Attached scsi disk sdb
[ 30.454676] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 30.454694] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 30.619334] Attempting manual resume
[ 30.619338] swsusp: Resume From Partition 8:22
[ 30.619339] PM: Checking swsusp image.
[ 30.619521] PM: Resume from disk failed.
[ 30.632295] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 30.632298] EXT3-fs: write access will be enabled during recovery.
[ 30.818583] usb 1-3: configuration #1 chosen from 1 choice
[ 31.089290] hda: HL-DT-ST DVDRAM GSA-H10N, ATAPI CD/DVD-ROM drive
[ 31.129217] usb 1-4: new full speed USB device using ohci_hcd and address 4
[ 31.321425] usb 1-4: not running at top speed; connect to a high speed hub
[ 31.336499] usb 1-4: configuration #1 chosen from 1 choice
[ 31.351554] usbcore: registered new interface driver hiddev
[ 31.412510] input: Logitech USB Receiver as /class/input/input1
[ 31.412521] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-2
[ 31.422531] input: Logitech USB Receiver as /class/input/input2
[ 31.422567] input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2
[ 31.422590] usbcore: registered new interface driver usbhid
[ 31.422592] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 31.425965] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 31.438463] hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 31.438471] Uniform CD-ROM driver Revision: 3.20
[ 31.625288] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000cf8177]
[ 32.299307] kjournald starting. Commit interval 5 seconds
[ 32.299321] EXT3-fs: sdb1: orphan cleanup on readonly fs
[ 32.309661] ext3_orphan_cleanup: deleting unreferenced inode 2016188
[ 32.319690] EXT3-fs: sdb1: 1 orphan inode deleted
[ 32.319692] EXT3-fs: recovery complete.
[ 32.330376] EXT3-fs: mounted filesystem with ordered data mode.
[ 39.300585] NET: Registered protocol family 10
[ 39.300681] lo: Disabled Privacy Extensions
[ 40.501625] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2d00
[ 40.501656] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2e00
[ 40.653051] Linux video capture interface: v2.00
[ 40.780127] input: PC Speaker as /class/input/input3
[ 40.791933] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 40.801289] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 40.827962] cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
[ 40.828034] CORE cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected]
[ 40.828037] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
[ 40.910231] cx2388x v4l2 driver version 0.0.6 loaded
[ 40.975623] tveeprom 2-0050: Hauppauge model 92001, rev C1B1, serial# 800219
[ 40.975627] tveeprom 2-0050: MAC address is 00-0D-FE-0C-35-DB
[ 40.975630] tveeprom 2-0050: tuner model is Conexant_CX24109 (idx 111, type 4)
[ 40.975633] tveeprom 2-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
[ 40.975635] tveeprom 2-0050: audio processor is CX883 (idx 32)
[ 40.975638] tveeprom 2-0050: decoder processor is CX883 (idx 22)
[ 40.975640] tveeprom 2-0050: has no radio, has IR receiver, has no IR transmitter
[ 40.975642] cx88[0]: hauppauge eeprom: model=92001
[ 40.981250] input: cx88 IR (Hauppauge Nova-S-Plus as /class/input/input4
[ 40.981281] cx88[0]/2: cx2388x 8802 Driver Manager
[ 40.981740] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
[ 40.981749] ACPI: PCI Interrupt 0000:01:00.2[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 18
[ 40.981757] cx88[0]/2: found at 0000:01:00.2, rev: 5, irq: 18, latency: 64, mmio: 0xfb000000
[ 40.981791] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 18
[ 40.981799] cx88[0]/0: found at 0000:01:00.0, rev: 5, irq: 18, latency: 64, mmio: 0xfd000000
[ 40.981823] cx88[0]/0: registered device video0 [v4l2]
[ 40.981839] cx88[0]/0: registered device vbi0
[ 41.103952] uvcvideo: Found UVC 1.00 device <unnamed> (046d:08ce)
[ 41.104479] usbcore: registered new interface driver xpad
[ 41.104483] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6
[ 41.105372] parport: PnPBIOS parport detected.
[ 41.105416] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 41.134553] usbcore: registered new interface driver uvcvideo
[ 41.134558] USB Video Class driver (v0.1.0)
[ 41.210226] cx2388x alsa driver version 0.0.6 loaded
[ 41.210268] ACPI: PCI Interrupt 0000:01:00.1[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 18
[ 41.210291] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 41.324862] irda_init()
[ 41.324877] NET: Registered protocol family 23
[ 41.425273] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
[ 41.425277] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 20 (level, low) -> IRQ 20
[ 41.425299] PCI: Setting latency timer of device 0000:00:06.1 to 64
[ 41.580238] usbcore: registered new interface driver snd-usb-audio
[ 41.580410] input: Yealink usb-p1k as /class/input/input5
[ 41.595007] usbcore: registered new interface driver yealink
[ 41.595011] drivers/usb/input/yealink.c: Yealink phone driver:yld-20051230
[ 41.635775] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 41.847703] fuse init (API version 7.8)
[ 41.880421] lp0: using parport0 (interrupt-driven).
[ 42.084982] Adding 8787512k swap on /dev/disk/by-uuid/d7adfb31-ca6c-4c2f-a96b-b1367f6cc888. Priority:-1 extents:1 across:8787512k
[ 42.255983] EXT3 FS on sdb1, internal journal
[ 49.602676] eth0: no IPv6 routers present
[ 49.751580] kjournald starting. Commit interval 5 seconds
[ 49.751715] EXT3 FS on sdb5, internal journal
[ 49.751719] EXT3-fs: mounted filesystem with ordered data mode.
[ 49.789319] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 49.851482] NTFS volume version 3.1.
[ 49.899094] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[ 49.899104] ReiserFS: sda3: using ordered data mode
[ 49.904179] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 49.905039] ReiserFS: sda3: checking transaction log (sda3)
[ 49.923744] ReiserFS: sda3: Using r5 hash to sort names
[ 49.968868] NTFS volume version 3.1.
[ 49.991591] NTFS volume version 3.1.
[ 50.014082] NTFS volume version 3.1.
[ 51.325913] NET: Registered protocol family 17
[ 56.955503] ibm_acpi: ec object not found
[ 56.992926] Using specific hotkey driver
[ 57.019178] No dock devices found.
[ 57.066460] input: Power Button (FF) as /class/input/input6
[ 57.066481] ACPI: Power Button (FF) [PWRF]
[ 57.066525] input: Power Button (CM) as /class/input/input7
[ 57.066539] ACPI: Power Button (CM) [PWRB]
[ 57.123722] pcc_acpi: loading...
[ 57.316979] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (version 2.00.00)
[ 57.316949] powernow-k8: MP systems not supported by PSB BIOS structure
[ 57.317015] powernow-k8: MP systems not supported by PSB BIOS structure
[ 60.878509] cdrom: This disc doesn't have any tracks I recognize!
[ 63.547598] ppdev: user-space parallel port driver
[ 64.316468] Installing knfsd (copyright (C) 1996 <email address hidden>).
[ 64.450306] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 64.450660] NFSD: starting 90-second grace period
[ 65.138290] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 65.402311] Bluetooth: Core ver 2.11
[ 65.402364] NET: Registered protocol family 31
[ 65.402366] Bluetooth: HCI device and connection manager initialized
[ 65.402370] Bluetooth: HCI socket layer initialized
[ 65.429967] Bluetooth: L2CAP ver 2.8
[ 65.429976] Bluetooth: L2CAP socket layer initialized
[ 65.489048] Bluetooth: RFCOMM socket layer initialized
[ 65.489062] Bluetooth: RFCOMM TTY layer initialized
[ 65.489063] Bluetooth: RFCOMM ver 1.8
[ 71.863779] eth1: no IPv6 routers present
[ 1060.972392] hda: DMA timeout retry
[ 1060.972396] hda: timeout waiting for DMA
[ 1065.972669] hda: status timeout: status=0xd0 { Busy }
[ 1065.972673] ide: failed opcode was: unknown
[ 1065.972678] hda: drive not ready for command
[ 1070.443068] BUG: soft lockup detected on CPU#0!
[ 1070.443071]
[ 1070.443072] Call Trace:
[ 1070.443074] <IRQ> [<ffffffff802bc31a>] softlockup_tick+0xfa/0x120
[ 1070.443107] [<ffffffff80299297>] update_process_times+0x57/0x90
[ 1070.443116] [<ffffffff8027a664>] smp_local_timer_interrupt+0x34/0x60
[ 1070.443122] [<ffffffff8027ade9>] smp_apic_timer_interrupt+0x59/0x80
[ 1070.443131] [<ffffffff80261ce6>] apic_timer_interrupt+0x66/0x70
[ 1070.443136] [<ffffffff802076c0>] ide_outb+0x0/0x10
[ 1070.443150] [<ffffffff803b1874>] ide_inb+0x4/0x10
[ 1070.443159] [<ffffffff80227d53>] ide_wait_stat+0xd3/0x160
[ 1070.443170] [<ffffffff8020ec4a>] ide_do_request+0x44a/0xa00
[ 1070.443173] [<ffffffff8027bd93>] __unmask_IO_APIC_irq+0x53/0x90
[ 1070.443179] [<ffffffff8027bdf8>] unmask_IO_APIC_irq+0x28/0x50
[ 1070.443186] [<ffffffff802bd5b8>] default_enable+0x18/0x30
[ 1070.443190] [<ffffffff802bd534>] check_irq_resend+0x24/0x90
[ 1070.443203] [<ffffffff803b1831>] ide_timer_expiry+0x2e1/0x320
[ 1070.443211] [<ffffffff803b1550>] ide_timer_expiry+0x0/0x320
[ 1070.443217] [<ffffffff80298c02>] run_timer_softirq+0x142/0x1c0
[ 1070.443228] [<ffffffff80211c9f>] __do_softirq+0x5f/0xd0
[ 1070.443237] [<ffffffff8026223c>] call_softirq+0x1c/0x28
[ 1070.443244] [<ffffffff8027009c>] do_softirq+0x2c/0x90
[ 1070.443249] [<ffffffff8027adee>] smp_apic_timer_interrupt+0x5e/0x80
[ 1070.443254] [<ffffffff8026e860>] default_idle+0x0/0x50
[ 1070.443257] [<ffffffff8026e860>] default_idle+0x0/0x50
[ 1070.443262] [<ffffffff80261ce6>] apic_timer_interrupt+0x66/0x70
[ 1070.443265] <EOI> [<ffffffff80231700>] unix_poll+0x0/0xa0
[ 1070.443282] [<ffffffff8026e889>] default_idle+0x29/0x50
[ 1070.443290] [<ffffffff8024b1ab>] cpu_idle+0x9b/0xd0
[ 1070.443298] [<ffffffff805707ca>] start_kernel+0x24a/0x260
[ 1070.443305] [<ffffffff80570163>] _sinittext+0x163/0x170
[ 1070.443312]
[ 1070.976206] hda: status timeout: status=0xd0 { Busy }
[ 1070.976209] ide: failed opcode was: unknown
[ 1070.976213] hda: drive not ready for command
[ 1075.979743] hda: status timeout: status=0xd0 { Busy }
[ 1075.979747] ide: failed opcode was: unknown
[ 1075.979751] hda: drive not ready for command
[ 1080.983281] hda: status timeout: status=0xd0 { Busy }
[ 1080.983284] ide: failed opcode was: unknown
[ 1080.983288] hda: drive not ready for command
[ 1085.986819] hda: status timeout: status=0xd0 { Busy }
[ 1085.986822] ide: failed opcode was: unknown
[ 1085.986826] hda: drive not ready for command
[ 1090.990356] hda: status timeout: status=0xd0 { Busy }
[ 1090.990359] ide: failed opcode was: unknown
[ 1090.990363] hda: drive not ready for command
[ 1095.993893] hda: status timeout: status=0xd0 { Busy }
[ 1095.993896] ide: failed opcode was: unknown
[ 1095.993900] hda: drive not ready for command
[ 1100.997431] hda: status timeout: status=0xd0 { Busy }
[ 1100.997434] ide: failed opcode was: unknown
[ 1100.997438] hda: drive not ready for command
[ 1106.000969] hda: status timeout: status=0xd0 { Busy }
[ 1106.000972] ide: failed opcode was: unknown
[ 1106.000976] hda: drive not ready for command
[ 1111.004506] hda: status timeout: status=0xd0 { Busy }
[ 1111.004509] ide: failed opcode was: unknown
[ 1111.004513] hda: drive not ready for command
[ 1116.008043] hda: status timeout: status=0xd0 { Busy }
[ 1116.008046] ide: failed opcode was: unknown
[ 1116.008050] hda: drive not ready for command
[ 1121.011581] hda: status timeout: status=0xd0 { Busy }
[ 1121.011584] ide: failed opcode was: unknown
[ 1121.011588] hda: drive not ready for command
[ 1126.015118] hda: status timeout: status=0xd0 { Busy }
[ 1126.015122] ide: failed opcode was: unknown
[ 1126.015125] hda: drive not ready for command
[ 1131.018656] hda: status timeout: status=0xd0 { Busy }
[ 1131.018659] ide: failed opcode was: unknown
[ 1131.018663] hda: drive not ready for command
[ 1136.022194] hda: status timeout: status=0xd0 { Busy }
[ 1136.022197] ide: failed opcode was: unknown
[ 1136.022201] hda: drive not ready for command
[ 1141.025731] hda: status timeout: status=0xd0 { Busy }
[ 1141.025734] ide: failed opcode was: unknown
[ 1141.025738] hda: drive not ready for command
[ 1146.029269] hda: status timeout: status=0xd0 { Busy }
[ 1146.029272] ide: failed opcode was: unknown
[ 1146.029275] hda: drive not ready for command
[ 1151.032806] hda: status timeout: status=0xd0 { Busy }
[ 1151.032810] ide: failed opcode was: unknown
[ 1151.032813] hda: drive not ready for command
[ 1156.036344] hda: status timeout: status=0xd0 { Busy }
[ 1156.036347] ide: failed opcode was: unknown
[ 1156.036351] hda: drive not ready for command
[ 1161.039881] hda: status timeout: status=0xd0 { Busy }
[ 1161.039885] ide: failed opcode was: unknown
[ 1161.039888] hda: drive not ready for command
[ 1166.043418] hda: status timeout: status=0xd0 { Busy }
[ 1166.043421] ide: failed opcode was: unknown
[ 1166.043425] hda: drive not ready for command
[ 1171.046956] hda: status timeout: status=0xd0 { Busy }
[ 1171.046960] ide: failed opcode was: unknown
[ 1171.046964] hda: drive not ready for command
[ 1176.050493] hda: status timeout: status=0xd0 { Busy }
[ 1176.050497] ide: failed opcode was: unknown
[ 1176.050500] hda: drive not ready for command
[ 1181.054032] hda: status timeout: status=0xd0 { Busy }
[ 1181.054035] ide: failed opcode was: unknown
[ 1181.054038] hda: drive not ready for command
[ 1186.057569] hda: status timeout: status=0xd0 { Busy }
[ 1186.057572] ide: failed opcode was: unknown
[ 1186.057576] hda: drive not ready for command
[ 1191.061106] hda: status timeout: status=0xd0 { Busy }
[ 1191.061110] ide: failed opcode was: unknown
[ 1191.061113] hda: drive not ready for command
[ 1196.064643] hda: status timeout: status=0xd0 { Busy }
[ 1196.064647] ide: failed opcode was: unknown
[ 1196.064650] hda: drive not ready for command
[ 1201.068181] hda: status timeout: status=0xd0 { Busy }
[ 1201.068185] ide: failed opcode was: unknown
[ 1201.068188] hda: drive not ready for command
[ 1206.071719] hda: status timeout: status=0xd0 { Busy }
[ 1206.071722] ide: failed opcode was: unknown
[ 1206.071725] hda: drive not ready for command
[ 1211.075256] hda: status timeout: status=0xd0 { Busy }
[ 1211.075259] ide: failed opcode was: unknown
[ 1211.075263] hda: drive not ready for command
[ 1216.078794] hda: status timeout: status=0xd0 { Busy }
[ 1216.078797] ide: failed opcode was: unknown
[ 1216.078801] hda: drive not ready for command
[ 2805.865027] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -32 (exp. 26).
[ 2805.866275] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -32 (exp. 26).
[ 2806.867055] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 2811.994339] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 2812.994237] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 2813.994258] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 2821.093078] uvcvideo: Button event (1).
[ 2821.333040] uvcvideo: Button event (0).
[ 2821.525012] uvcvideo: Button event (1).
[ 2822.084931] uvcvideo: Button event (0).
[ 2825.264639] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 2826.264660] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 2827.264557] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 2831.304006] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 2832.303902] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 2833.307797] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 2877.925761] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 2878.925662] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 2879.925559] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 3014.775108] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 3015.775006] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 3016.774901] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 3026.189686] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 3028.437400] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 3030.717104] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 3698.157467] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 3699.157365] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 3700.157259] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 3721.766362] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 3734.264694] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 3735.264586] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 3739.352152] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).
[ 3743.571565] uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110 (exp. 26).