Ubuntu
compiz package

Poor Graphics and Firefox Performance with Intrepid

Asked by RichPicker

I kept Feisty as long as I could. It was working very well. After upgrading to Intrepid I have had poor Firefox performance, and distorted graphics.

Firefox is sometimes very slow to load a page. While it is loading, the screen turns grey color as if the laptop is going to sleep. When Firfox first opens, it is scratchy, scrambled, and distorted.

Regardless of which program I am running, when the laptop is waked up from sleeping, the screen is very distorted, scratchy, and scrambled for a few seconds.

Totem is extremely slow to start. While it is starting, the screen flashes and flickers and is distorted.

Here is what I've done to try to fix it so far, but none of them have solved it:
------------------------------
Here is the results of compiz --replace

rich@rich-laptop:~$ compiz --replace
Checking for Xgl: not present.
Detected PCI ID for VGA:
Checking for texture_from_pixmap: not present.
Trying again with indirect rendering:
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1280x800) to maximum 3D texture size (204: Passed.
Checking for Software Rasterizer: Not present.
Checking for nVidia: not present.
Checking for FBConfig: present.
Checking for Xgl: not present.
/usr/bin/compiz.real (video) - Warn: No 8 bit GLX pixmap format, disabling YV12 image format

-------------------------------
Followed the instructions here to try to help Firefox to be faster.
http://www.ubuntugeek.com/speed-up-firefox-web-browser.html

-------------------------------
System -> Preferences -> Appearance ->Visual Effects -> Normal and Extra

------------------------------
Pressed Esc at Grubb, entered Recovery Mode, selected Try to Fix X Server, then resumed Normal Boot

I am using a Dell Inspiron 1300 laptop. Have run Dapper, Edgy, Feisty, and now Intrepid. I will appreciate any suggestions.
Thank you.

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu compiz Edit question
Assignee:
No assignee Edit question
Solved by:
RichPicker
Solved:
Last query:
Last reply:
Revision history for this message
Guillermo Belli (glock24) said : 		#1

Can you please post the output of these commands:

lspci

dmesg

cat /var/log/Xorg.0.log

cat /etc/X11/xorg.conf

With these we'll be ale to help you in a more efficient way.

Revision history for this message
RichPicker (rich-braden) said : 		#2

rich@rich-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
02:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)

-------------------------------------------------------------------------------------------------------------------------------------

dmesg (the first few lines are missing?)

[ 0.000000] bootmap 00002000 - 00005efc
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001f7d3000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[ 0.000000] #4 [001eff2000 - 001f7c351d] RAMDISK ==> [001eff2000 - 001f7c351d]
[ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[ 0.000000] #6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001f7d3
[ 0.000000] HighMem 0x0001f7d3 -> 0x0001f7d3
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001f7d3
[ 0.000000] On node 0 totalpages: 128882
[ 0.000000] free_area_init_node: node 0, pgdat c048a580, node_mem_map c1000000
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 123785 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127748
[ 0.000000] Kernel command line: root=UUID=32a67470-cab2-4e0a-ba12-160ce13e40bd ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 1695.789 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Memory: 497348k/515916k available (2572k kernel code, 17956k reserved, 1160k data, 424k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xe0000000 - 0xff3fe000 ( 499 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdf7d3000 ( 503 MB)
[ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB)
[ 0.004000] .data : 0xc038335a - 0xc04a5680 (1160 kB)
[ 0.004000] .text : 0xc0100000 - 0xc038335a (2572 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004015] Calibrating delay loop (skipped), value calculated using timer frequency.. 3391.57 BogoMIPS (lpj=6783156)
[ 0.004037] Security Framework initialized
[ 0.004049] SELinux: Disabled at boot.
[ 0.004073] AppArmor: AppArmor initialized
[ 0.004083] Mount-cache hash table entries: 512
[ 0.004282] Initializing cgroup subsys ns
[ 0.004290] Initializing cgroup subsys cpuacct
[ 0.004293] Initializing cgroup subsys memory
[ 0.004310] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004314] CPU: L2 cache: 2048K
[ 0.004328] Checking 'hlt' instruction... OK.
[ 0.020579] SMP alternatives: switching to UP code
[ 0.026823] ACPI: Core revision 20080609
[ 0.028538] ACPI: Checking initramfs for custom DSDT
[ 0.425660] ENABLING IO-APIC IRQs
[ 0.425863] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.466094] CPU0: Intel(R) Pentium(R) M processor 1.70GHz stepping 08
[ 0.468029] Brought up 1 CPUs
[ 0.468029] Total of 1 processors activated (3391.57 BogoMIPS).
[ 0.468029] CPU0 attaching sched-domain:
[ 0.468029] domain 0: span 0 level CPU
[ 0.468029] groups: 0
[ 0.468029] net_namespace: 840 bytes
[ 0.468029] Booting paravirtualized kernel on bare hardware
[ 0.468029] Time: 0:02:02 Date: 01/24/09
[ 0.468029] NET: Registered protocol family 16
[ 0.468029] EISA bus registered
[ 0.468029] ACPI: bus type pci registered
[ 0.468029] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.468029] PCI: MCFG area at e0000000 reserved in E820
[ 0.468029] PCI: Using MMCONFIG for extended config space
[ 0.468029] PCI: Using configuration type 1 for base access
[ 0.468029] ACPI: EC: Look up EC in DSDT
[ 0.483334] ACPI: Interpreter enabled
[ 0.483338] ACPI: (supports S0 S3 S4 S5)
[ 0.483354] ACPI: Using IOAPIC for interrupt routing
[ 0.514818] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.514931] PCI: 0000:00:02.0 reg 10 32bit mmio: [dff00000, dff7ffff]
[ 0.514938] PCI: 0000:00:02.0 reg 14 io port: [eff8, efff]
[ 0.514944] PCI: 0000:00:02.0 reg 18 32bit mmio: [c0000000, cfffffff]
[ 0.514949] PCI: 0000:00:02.0 reg 1c 32bit mmio: [dfec0000, dfefffff]
[ 0.514981] PCI: 0000:00:02.1 reg 10 32bit mmio: [dff80000, dfffffff]
[ 0.515095] PCI: 0000:00:1b.0 reg 10 64bit mmio: [dfebc000, dfebffff]
[ 0.515148] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.515154] pci 0000:00:1b.0: PME# disabled
[ 0.515224] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.515229] pci 0000:00:1c.0: PME# disabled
[ 0.515300] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.515306] pci 0000:00:1c.3: PME# disabled
[ 0.515356] PCI: 0000:00:1d.0 reg 20 io port: [bf80, bf9f]
[ 0.515419] PCI: 0000:00:1d.1 reg 20 io port: [bf60, bf7f]
[ 0.515482] PCI: 0000:00:1d.2 reg 20 io port: [bf40, bf5f]
[ 0.515544] PCI: 0000:00:1d.3 reg 20 io port: [bf20, bf3f]
[ 0.515609] PCI: 0000:00:1d.7 reg 10 32bit mmio: [b0000000, b00003ff]
[ 0.515667] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.515673] pci 0000:00:1d.7: PME# disabled
[ 0.515809] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.515817] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.515823] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
[ 0.515847] PCI: 0000:00:1f.1 reg 10 io port: [1f0, 1f7]
[ 0.515855] PCI: 0000:00:1f.1 reg 14 io port: [3f4, 3f7]
[ 0.515863] PCI: 0000:00:1f.1 reg 18 io port: [170, 177]
[ 0.515872] PCI: 0000:00:1f.1 reg 1c io port: [374, 377]
[ 0.515880] PCI: 0000:00:1f.1 reg 20 io port: [bfa0, bfaf]
[ 0.516041] PCI: bridge 0000:00:1c.3 io port: [d000, dfff]
[ 0.516047] PCI: bridge 0000:00:1c.3 32bit mmio: [dfc00000, dfdfffff]
[ 0.516056] PCI: bridge 0000:00:1c.3 64bit mmio pref: [d0000000, d01fffff]
[ 0.516097] PCI: 0000:02:00.0 reg 10 32bit mmio: [dfbfe000, dfbfffff]
[ 0.516152] pci 0000:02:00.0: supports D1
[ 0.516154] pci 0000:02:00.0: supports D2
[ 0.516157] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.516162] pci 0000:02:00.0: PME# disabled
[ 0.516207] PCI: 0000:02:03.0 reg 10 32bit mmio: [dfbfd000, dfbfdfff]
[ 0.516274] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
[ 0.516280] pci 0000:02:03.0: PME# disabled
[ 0.516332] pci 0000:00:1e.0: transparent bridge
[ 0.516340] PCI: bridge 0000:00:1e.0 32bit mmio: [dfb00000, dfbfffff]
[ 0.516368] bus 00 -> node 0
[ 0.516375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.516977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.517209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.517380] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.526895] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.527057] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.527217] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[ 0.527376] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11)
[ 0.527514] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.527657] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.527802] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.528125] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.528166] pnp: PnP ACPI init
[ 0.528174] ACPI: bus type pnp registered
[ 0.568591] pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.568596] pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.568711] pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.568716] pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.568720] pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.570037] pnp: PnP ACPI: found 11 devices
[ 0.570040] ACPI: ACPI bus type pnp unregistered
[ 0.570044] PnPBIOS: Disabled by ACPI PNP
[ 0.570431] PCI: Using ACPI for IRQ routing
[ 0.570556] NET: Registered protocol family 8
[ 0.570556] NET: Registered protocol family 20
[ 0.570556] NetLabel: Initializing
[ 0.570556] NetLabel: domain hash size = 128
[ 0.570556] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.570556] NetLabel: unlabeled traffic allowed by default
[ 0.570556] hpet clockevent registered
[ 0.570556] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.570556] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.572394] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.572397] actual entries 65620
[ 0.572502] AppArmor: AppArmor Filesystem Enabled
[ 0.572529] ACPI: RTC can wake from S4
[ 0.572572] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 0.572575] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 0.572579] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
[ 0.572583] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.572586] system 00:00: iomem range 0x100000-0x1f7d37ff could not be reserved
[ 0.572590] system 00:00: iomem range 0x1f7d3800-0x1f7fffff could not be reserved
[ 0.572593] system 00:00: iomem range 0x1f800000-0x1fffffff could not be reserved
[ 0.572597] system 00:00: iomem range 0xfeda0000-0xfedfffff could not be reserved
[ 0.572601] system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved
[ 0.572605] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 0.572608] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 0.572612] system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved
[ 0.572616] system 00:00: iomem range 0xf0000000-0xf0003fff could not be reserved
[ 0.572620] system 00:00: iomem range 0xf0004000-0xf0004fff could not be reserved
[ 0.572623] system 00:00: iomem range 0xf0005000-0xf0005fff could not be reserved
[ 0.572627] system 00:00: iomem range 0xf0006000-0xf0006fff could not be reserved
[ 0.572631] system 00:00: iomem range 0xf0008000-0xf000bfff could not be reserved
[ 0.572635] system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.572643] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.572650] system 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 0.572653] system 00:03: ioport range 0x1080-0x10bf has been reserved
[ 0.572657] system 00:03: ioport range 0x10c0-0x10df has been reserved
[ 0.572660] system 00:03: ioport range 0x10e0-0x10ff has been reserved
[ 0.572669] system 00:08: ioport range 0x900-0x90f has been reserved
[ 0.572673] system 00:08: ioport range 0x910-0x91f has been reserved
[ 0.572676] system 00:08: ioport range 0x920-0x92f has been reserved
[ 0.572679] system 00:08: ioport range 0x930-0x93f has been reserved
[ 0.572682] system 00:08: ioport range 0x940-0x97f has been reserved
[ 0.607791] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[ 0.607794] pci 0000:00:1c.0: IO window: disabled
[ 0.607801] pci 0000:00:1c.0: MEM window: disabled
[ 0.607806] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.607815] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c
[ 0.607819] pci 0000:00:1c.3: IO window: 0xd000-0xdfff
[ 0.607826] pci 0000:00:1c.3: MEM window: 0xdfc00000-0xdfdfffff
[ 0.607832] pci 0000:00:1c.3: PREFETCH window: 0x000000d0000000-0x000000d01fffff
[ 0.607841] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.607844] pci 0000:00:1e.0: IO window: disabled
[ 0.607851] pci 0000:00:1e.0: MEM window: 0xdfb00000-0xdfbfffff
[ 0.607856] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.607877] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.607884] pci 0000:00:1c.0: setting latency timer to 64
[ 0.607894] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.607900] pci 0000:00:1c.3: setting latency timer to 64
[ 0.607909] pci 0000:00:1e.0: setting latency timer to 64
[ 0.607914] bus: 00 index 0 io port: [0, ffff]
[ 0.607916] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.607919] bus: 0b index 0 mmio: [0, 0]
[ 0.607921] bus: 0b index 1 mmio: [0, 0]
[ 0.607923] bus: 0b index 2 mmio: [0, 0]
[ 0.607925] bus: 0b index 3 mmio: [0, 0]
[ 0.607928] bus: 0c index 0 io port: [d000, dfff]
[ 0.607930] bus: 0c index 1 mmio: [dfc00000, dfdfffff]
[ 0.607933] bus: 0c index 2 mmio: [d0000000, d01fffff]
[ 0.607935] bus: 0c index 3 mmio: [0, 0]
[ 0.607938] bus: 02 index 0 mmio: [0, 0]
[ 0.607940] bus: 02 index 1 mmio: [dfb00000, dfbfffff]
[ 0.607943] bus: 02 index 2 mmio: [0, 0]
[ 0.607945] bus: 02 index 3 io port: [0, ffff]
[ 0.607947] bus: 02 index 4 mmio: [0, ffffffff]
[ 0.607957] NET: Registered protocol family 2
[ 0.608107] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.608328] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.608433] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.608525] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.608529] TCP reno registered
[ 0.608607] NET: Registered protocol family 1
[ 0.608733] checking if image is initramfs... it is
[ 1.072066] Switched to high resolution mode on CPU 0
[ 1.422068] Freeing initrd memory: 8005k freed
[ 1.422990] audit: initializing netlink socket (disabled)
[ 1.423017] type=2000 audit(1232755322.420:1): initialized
[ 1.430330] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.433096] VFS: Disk quotas dquot_6.5.1
[ 1.433205] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.433340] msgmni has been set to 987
[ 1.433494] io scheduler noop registered
[ 1.433497] io scheduler anticipatory registered
[ 1.433500] io scheduler deadline registered
[ 1.433514] io scheduler cfq registered (default)
[ 1.433537] pci 0000:00:02.0: Boot video device
[ 1.433754] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.433806] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.433858] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.433912] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.433959] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.434074] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.434121] pcieport-driver 0000:00:1c.3: found MSI capability
[ 1.434167] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 1.434217] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 1.434266] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 1.434647] isapnp: Scanning for PnP cards...
[ 1.788631] isapnp: No Plug & Play device found
[ 1.828603] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.831103] brd: module loaded
[ 1.831193] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.831327] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.831498] i8042.c: Warning: Keylock active.
[ 1.833108] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.833116] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.833449] mice: PS/2 mouse device common for all mice
[ 1.833603] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.833634] rtc0: alarms up to one month, y3k, hpet irqs
[ 1.833800] EISA: Probing bus 0 at eisa.0
[ 1.833809] Cannot allocate resource for EISA slot 1
[ 1.833838] EISA: Detected 0 cards.
[ 1.833843] cpuidle: using governor ladder
[ 1.833846] cpuidle: using governor menu
[ 1.834442] TCP cubic registered
[ 1.834484] Using IPI No-Shortcut mode
[ 1.834727] registered taskstats version 1
[ 1.834859] Magic number: 9:728:1
[ 1.834869] tty ttye9: hash matches
[ 1.834875] tty ttybc: hash matches
[ 1.835041] rtc_cmos 00:06: setting system clock to 2009-01-24 00:02:03 UTC (1232755323)
[ 1.835045] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.835048] EDD information not available.
[ 1.835355] Freeing unused kernel memory: 424k freed
[ 1.835410] Write protecting the kernel text: 2576k
[ 1.835443] Write protecting the kernel read-only data: 936k
[ 1.837091] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.094152] fuse init (API version 7.9)
[ 2.350275] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 2.350340] processor ACPI0007:00: registered as cooling_device0
[ 2.350345] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.356178] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.359399] ACPI: Thermal Zone [THM] (31 C)
[ 3.023971] usbcore: registered new interface driver usbfs
[ 3.024023] usbcore: registered new interface driver hub
[ 3.024079] usbcore: registered new device driver usb
[ 3.029800] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.029817] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.029821] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.029874] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.033778] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.033786] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.033803] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xb0000000
[ 3.037893] USB Universal Host Controller Interface driver v3.0
[ 3.061549] No dock devices found.
[ 3.079185] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.079415] usb usb1: configuration #1 chosen from 1 choice
[ 3.079448] hub 1-0:1.0: USB hub found
[ 3.079459] hub 1-0:1.0: 8 ports detected
[ 3.092784] SCSI subsystem initialized
[ 3.172070] libata version 3.00 loaded.
[ 3.284402] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.284416] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.284421] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.284449] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.284485] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
[ 3.284600] usb usb2: configuration #1 chosen from 1 choice
[ 3.284632] hub 2-0:1.0: USB hub found
[ 3.284640] hub 2-0:1.0: 2 ports detected
[ 3.388315] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.388328] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.388333] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.388363] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.388402] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
[ 3.388508] usb usb3: configuration #1 chosen from 1 choice
[ 3.388539] hub 3-0:1.0: USB hub found
[ 3.388546] hub 3-0:1.0: 2 ports detected
[ 3.396025] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 3.529430] usb 1-3: configuration #1 chosen from 1 choice
[ 3.545337] usbcore: registered new interface driver libusual
[ 3.551885] Initializing USB Mass Storage driver...
[ 3.552986] scsi0 : SCSI emulation for USB Mass Storage devices
[ 3.553138] usbcore: registered new interface driver usb-storage
[ 3.553142] USB Mass Storage support registered.
[ 3.553232] usb-storage: device found at 2
[ 3.553234] usb-storage: waiting for device to settle before scanning
[ 3.567179] Marking TSC unstable due to TSC halts in idle
[ 3.596459] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.596471] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.596476] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.596515] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.596553] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
[ 3.596664] usb usb4: configuration #1 chosen from 1 choice
[ 3.596704] hub 4-0:1.0: USB hub found
[ 3.596712] hub 4-0:1.0: 2 ports detected
[ 3.700335] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.700344] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.700348] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.700372] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.700405] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
[ 3.700499] usb usb5: configuration #1 chosen from 1 choice
[ 3.700531] hub 5-0:1.0: USB hub found
[ 3.700537] hub 5-0:1.0: 2 ports detected
[ 3.809454] b44 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.868221] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
[ 3.868260] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.868300] pata_acpi 0000:00:1f.1: setting latency timer to 64
[ 3.868316] pata_acpi 0000:00:1f.1: PCI INT A disabled
[ 3.872840] ata_piix 0000:00:1f.1: version 2.12
[ 3.872848] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.872880] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.873051] b44.c:v2.0
[ 3.873499] scsi1 : ata_piix
[ 3.873587] scsi2 : ata_piix
[ 3.874470] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 3.874474] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 3.892558] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:14:22:ab:33:17
[ 4.068147] Clocksource tsc unstable (delta = -388055464 ns)
[ 4.157158] ata1.00: ATA-6: ST960822A, 8.03, max UDMA/100
[ 4.157161] ata1.00: 117210240 sectors, multi 8: LBA48
[ 4.157184] ata1.01: ATAPI: SONY DVD+/-RW DW-Q58A, UDS1, max UDMA/33
[ 4.173082] ata1.00: configured for UDMA/100
[ 4.188601] ata1.01: configured for UDMA/33
[ 4.188649] ata2: port disabled. ignoring.
[ 4.188793] scsi 1:0:0:0: Direct-Access ATA ST960822A 8.03 PQ: 0 ANSI: 5
[ 4.189029] scsi 1:0:0:0: Attached scsi generic sg0 type 0
[ 4.189960] scsi 1:0:1:0: CD-ROM SONY DVD+-RW DW-Q58A UDS1 PQ: 0 ANSI: 5
[ 4.190069] scsi 1:0:1:0: Attached scsi generic sg1 type 5
[ 4.219412] Driver 'sd' needs updating - please use bus_type methods
[ 4.219543] sd 1:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 4.219568] sd 1:0:0:0: [sda] Write Protect is off
[ 4.219571] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.219611] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.219696] sd 1:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 4.219719] sd 1:0:0:0: [sda] Write Protect is off
[ 4.219722] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.219761] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.219766] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 4.246236] sda1 sda2 < sda5 >
[ 4.274267] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.281109] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.281114] Uniform CD-ROM driver Revision: 3.20
[ 4.281206] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 4.573961] PM: Starting manual resume from disk
[ 4.573966] PM: Resume from partition 8:5
[ 4.573968] PM: Checking hibernation image.
[ 4.574163] PM: Resume from disk failed.
[ 4.647583] kjournald starting. Commit interval 5 seconds
[ 4.647598] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.552192] usb-storage: device scan complete
[ 8.552671] scsi 0:0:0:0: Direct-Access WD 3200AAJ External 1.65 PQ: 0 ANSI: 4
[ 8.553644] sd 0:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 8.554519] sd 0:0:0:0: [sdb] Write Protect is off
[ 8.554522] sd 0:0:0:0: [sdb] Mode Sense: 21 00 00 00
[ 8.554525] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[ 8.555267] sd 0:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 8.556018] sd 0:0:0:0: [sdb] Write Protect is off
[ 8.556021] sd 0:0:0:0: [sdb] Mode Sense: 21 00 00 00
[ 8.556024] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[ 8.556028] sdb: sdb1
[ 8.568146] sd 0:0:0:0: [sdb] Attached SCSI disk
[ 8.568319] sd 0:0:0:0: Attached scsi generic sg2 type 0
[ 12.110036] udevd version 124 started
[ 12.874893] Linux agpgart interface v0.103
[ 12.934017] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 12.934440] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 13.015357] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.149539] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 13.149764] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.245483] ACPI: AC Adapter [AC] (on-line)
[ 13.757508] ACPI: Battery Slot [BAT0] (battery present)
[ 13.757655] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 13.757999] ACPI: Lid Switch [LID]
[ 13.758070] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 13.768026] ACPI: Power Button (CM) [PBTN]
[ 13.768230] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 13.780038] ACPI: Sleep Button (CM) [SBTN]
[ 14.788770] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/input/input5
[ 14.800035] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 14.800229] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:26/input/input6
[ 14.816037] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 15.435363] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.435391] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.550211] iTCO_vendor_support: vendor-support=0
[ 15.576505] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 15.576650] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 15.576832] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.668940] intel_rng: FWH not detected
[ 15.774394] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 15.962040] ieee80211_crypt: registered algorithm 'NULL'
[ 15.999059] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 15.999065] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 16.086602] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 16.086607] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 16.086691] ipw2200 0000:02:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 16.091454] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 16.091502] firmware: requesting ipw2200-bss.fw
[ 16.705972] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x200000
[ 16.741852] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 16.762806] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 17.830889] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 18.176542] lp: driver loaded but no devices found
[ 18.411708] Adding 1485972k swap on /dev/sda5. Priority:-1 extents:1 across:1485972k
[ 18.943904] EXT3 FS on sda1, internal journal
[ 19.999264] type=1505 audit(1232755341.985:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3938
[ 20.223748] type=1505 audit(1232755342.209:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3943
[ 20.224117] type=1505 audit(1232755342.213:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3943
[ 20.394727] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.048444] ACPI: WMI: Mapper loaded
[ 22.057632] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 22.135769] apm: BIOS not found.
[ 22.324834] ppdev: user-space parallel port driver
[ 24.589759] Bluetooth: Core ver 2.13
[ 24.591558] NET: Registered protocol family 31
[ 24.591564] Bluetooth: HCI device and connection manager initialized
[ 24.591568] Bluetooth: HCI socket layer initialized
[ 24.925342] Bluetooth: L2CAP ver 2.11
[ 24.925357] Bluetooth: L2CAP socket layer initialized
[ 24.973678] Bluetooth: RFCOMM socket layer initialized
[ 24.974201] Bluetooth: RFCOMM TTY layer initialized
[ 24.974217] Bluetooth: RFCOMM ver 1.10
[ 24.999199] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.999207] Bluetooth: BNEP filters: protocol multicast
[ 25.117638] Bridge firewalling registered
[ 25.118938] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 25.197555] Bluetooth: SCO (Voice Link) ver 0.6
[ 25.197565] Bluetooth: SCO socket layer initialized
[ 29.262925] NET: Registered protocol family 17
[ 30.564898] [drm] Initialized drm 1.1.0 20060810
[ 30.571264] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 30.571278] pci 0000:00:02.0: setting latency timer to 64
[ 30.573461] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 48.920791] NET: Registered protocol family 10
[ 48.922771] lo: Disabled Privacy Extensions
[ 48.925033] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 59.552037] eth1: no IPv6 routers present
[ 61.366854] kjournald starting. Commit interval 5 seconds
[ 61.367165] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 61.369396] EXT3 FS on sdb1, internal journal
[ 61.369408] EXT3-fs: mounted filesystem with ordered data mode.
[ 72.816312] ieee80211_crypt: registered algorithm 'WEP'
[ 194.947807] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
rich@rich-laptop:~$

-------------------------------------------------------------------------------------------------------------------------------------

cat /var/log/Xorg.0.log (first few lines are missing?)

(II) The server relies on HAL to provide the list of input devices.
 If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d9a40
(II) Module ABI versions:
 X.Org ANSI C Emulation: 0.4
 X.Org Video Driver: 4.1
 X.Org XInput driver : 2.1
 X.Org Server Extension : 1.1
 X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xdff00000/0, 0xc0000000/0, 0xdfec0000/0, I/O @ 0x0000eff8/0
(--) PCI: (0@0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 3, Mem @ 0xdff80000/0
(II) System resource ranges:
 [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
 [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
 compiled for 1.5.2, module version = 1.0.0
 Module class: X.Org Server Extension
 ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
 compiled for 1.5.2, module version = 1.0.0
 Module class: X.Org Server Extension
 ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
 compiled for 1.5.2, module version = 1.0.0
 ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
 compiled for 1.5.2, module version = 2.1.0
 Module class: X.Org Font Renderer
 ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"

(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
 compiled for 1.5.2, module version = 1.13.0
 Module class: X.Org Server Extension
 ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
 compiled for 1.5.2, module version = 1.0.0
 ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(II) Matched intel from file name intel.ids
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"

(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
 compiled for 1.5.2, module version = 2.4.1
 Module class: X.Org Video Driver
 ABI class: X.Org Video Driver, version 4.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
 i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
 E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
 965GM, 965GME/GLE, G33, Q35, Q33,
 Mobile Intel® GM45 Express Chipset,
 Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
 [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
 [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
 [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
 [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
 [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
 [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
 [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
 [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
 [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
 compiled for 1.5.2, module version = 1.0.0
 ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"

(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
 compiled for 1.5.2, module version = 1.1.0
 ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
 compiled for 1.5.2, module version = 0.1.0
 ABI class: X.Org Video Driver, version 4.1
(II) intel(0): Creating default Display subsection in Screen section
 "Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xDFF00000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LPL", prod id 43264
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "LPL", prod id 43264
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
 compiled for 1.5.2, module version = 1.0.0
 ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"

(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
 compiled for 1.5.2, module version = 2.4.0
 ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x80000203 to 0x00000000
(WW) intel(0): PIPEASTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): PIPEASTAT after: status:
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x80000202 to 0x00000202
(WW) intel(0): PIPEBSTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x30000000 to 0x000c0c00
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
 [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
 [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
 [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
 [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
 [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
 [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
 [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 110336 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 441340 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xdff00000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc1000000, handle = 0xc1000000
(II) intel(0): [drm] mapped back buffer at 0xc4000000, handle = 0xc4000000
(II) intel(0): [drm] mapped depth buffer at 0xc5000000, handle = 0xc5000000
(II) intel(0): [drm] mapped classic textures at 0xc6000000, handle = 0xc6000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 31457280 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x06000000 (pgoffset 24576)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000001f820000 physical
)
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000001fe20000 physical
)
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000001fe21000 physical
)
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000001fe33000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled
(II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB)
(II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled
(II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled
(II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"

(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
 compiled for 1.5.2, module version = 2.0.99
 Module class: X.Org XInput Driver
 ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"

(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
 compiled for 1.5.2, module version = 0.15.2
 Module class: X.Org XInput Driver
 ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 0.15.2
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(**) Option "Device" "/dev/input/event8"
(**) Option "SHMConfig" "True"
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Video Bus: xkb_model: "pc105"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Video Bus: xkb_model: "pc105"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) intel(0): EDID vendor "LPL", prod id 43264
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 72.25 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (50.2 kHz)
(II) intel(0): Modeline "1280x800"x0.0 72.25 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (50.2 kHz)
(II) intel(0): EDID vendor "LPL", prod id 43264
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(EE) intel(0): underrun on pipe B!
AUDIT: Fri Jan 23 17:02:43 2009: 4906 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5125 )
AUDIT: Fri Jan 23 17:02:43 2009: 4906 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5126 )
AUDIT: Fri Jan 23 17:02:43 2009: 4906 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5127 )
(II) intel(0): EDID vendor "LPL", prod id 43264
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 72.25 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (50.2 kHz)
(II) intel(0): Modeline "1280x800"x0.0 72.25 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (50.2 kHz)
(II) intel(0): EDID vendor "LPL", prod id 43264
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(EE) intel(0): underrun on pipe B!
(II) intel(0): EDID vendor "LPL", prod id 43264
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 72.25 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (50.2 kHz)
(II) intel(0): Modeline "1280x800"x0.0 72.25 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (50.2 kHz)
(II) intel(0): EDID vendor "LPL", prod id 43264
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(EE) intel(0): underrun on pipe B!
(II) intel(0): EDID vendor "LPL", prod id 43264
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 72.25 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (50.2 kHz)
(II) intel(0): Modeline "1280x800"x0.0 72.25 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (50.2 kHz)
(II) intel(0): EDID vendor "LPL", prod id 43264
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(EE) intel(0): underrun on pipe B!
(II) intel(0): EDID vendor "LPL", prod id 43264
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 72.25 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (50.2 kHz)
(II) intel(0): Modeline "1280x800"x0.0 72.25 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (50.2 kHz)
(II) intel(0): EDID vendor "LPL", prod id 43264
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(EE) intel(0): underrun on pipe B!
(II) intel(0): EDID vendor "LPL", prod id 43264
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 72.25 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (50.2 kHz)
(II) intel(0): Modeline "1280x800"x0.0 72.25 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (50.2 kHz)
(II) intel(0): EDID vendor "LPL", prod id 43264
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(II) intel(0): EDID vendor "LPL", prod id 43264
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 72.25 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (50.2 kHz)
(II) intel(0): Modeline "1280x800"x0.0 72.25 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (50.2 kHz)
(II) intel(0): EDID vendor "LPL", prod id 43264
(II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle seperate sync.
rich@rich-laptop:~$

02:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
rich@rich-laptop:~$

-------------------------------------------------------------------------------------------------------------------------------------

rich@rich-laptop:~$ cat /etc/X11/xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Device"
 Identifier "Configured Video Device"
EndSection

Section "Monitor"
 Identifier "Configured Monitor"
EndSection

Section "Screen"
 Identifier "Default Screen"
 Monitor "Configured Monitor"
 Device "Configured Video Device"
EndSection
rich@rich-laptop:~$

Revision history for this message
Guillermo Belli (glock24) said : 		#3

Everything seems in order, don't know what may be causing these issues.

In the last few days there were 2 updates to the xserver-xorg-video-intel package, which contain the video driver for your card. I recommend you make a "sudo apt-get update && sudo apt-get install xserver-xorg-video-intel" so you have the latest updates, maybe that solves your problem.

If not, you can try using the old "i810" driver, which for some people works better. To do so, edit /etc/X11/xorg.conf like this:

Section "Device"
 Driver "i810"
 Identifier "Configured Video Device"
EndSection

Section "Monitor"
 Identifier "Configured Monitor"
EndSection

Section "Screen"
 Identifier "Default Screen"
 Monitor "Configured Monitor"
 Device "Configured Video Device"
EndSection

After this, restart X and let's hope you get your video fixed.

Revision history for this message
RichPicker (rich-braden) said : 		#4

Not good.

I issued this command: sudo apt-get update && sudo apt-get install xserver-xorg-video-intel

All seemed okay, until I shutdown and restarted the laptop. Then, all I got was a TEXT login screen. Entered login and password, and got this only rich@rich-laptop:~$

I tried booting different ways - recovery mode, etc. But nothing helped.

I did a clean install from the Intrepid iso CD. I haven't backed up for a few days, so of course I lost data. It will now be several days to get the laptop set up again with synaptics, alsa, etc.

And the graphics are still bad. I'll contact you again next week after I get the laptop running fully again.

Revision history for this message
RichPicker (rich-braden) said : 		#5

I have Intrepid re-installed.

1. Please know that I am a common computer user. I am nothing close to a UNIX administrator, and I know nothing of the inner workings of a computer. I am using Ubuntu as a way to support open source. I need quite a bit of help to get my laptop set up and running each time I upgrade.

2. What did I do wrong when I entered that command? Why did it kill my machine the way it did? How can I prevent that in the future? It cost me a lot of time and data.

3. I would say that the touchpad performs terribly. But after closer observation, I think it is because the laptop, and especially Firefox, is running very slowly with Intrepid. I must click several times, repeatedly. And sometimes I click a link and nothing happens. I have adjusted the touchpad several times, but the laptop continues to be very slow to respond to the clicks.

4. The graphics are still troubling. Something is wrong. Is it a problem with Firefox 3?

5. Totem still loads very slowly. Once it is running, I press Ctrl+O to open a file. Then when I double-click the file to open it, nothing happens. It is very very slow to open and respond to the touchpad. I have to select the file and then press enter to open it.

6. Something new has developed. When I start the laptop and Ubuntu loads and the 'song' plays, I hear the song being played twice - the second one jumbled on top of the first. The sound/song is scrambled.

7. Are laptops loosing their support in Ubuntu?

Lots of questions. I do appreciate your help. Without your help I would not be able to use Ubuntu.

--- On Sat, 1/24/09, RichPicker <email address hidden> wrote:

> From: RichPicker <email address hidden>
> Subject: Re: [Question #58502]: Poor Graphics and Firefox Performance with Intrepid
> To: <email address hidden>
> Date: Saturday, January 24, 2009, 11:23 AM
> Your question #58502 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/58502
>
> Status: Answered => Open
>
> You are still having a problem:
> Not good.
>
> I issued this command: sudo apt-get update && sudo
> apt-get install
> xserver-xorg-video-intel
>
> All seemed okay, until I shutdown and restarted the laptop.
> Then, all I
> got was a TEXT login screen. Entered login and password,
> and got this
> only rich@rich-laptop:~$
>
> I tried booting different ways - recovery mode, etc. But
> nothing helped.
>
> I did a clean install from the Intrepid iso CD. I
> haven't backed up for
> a few days, so of course I lost data. It will now be
> several days to get
> the laptop set up again with synaptics, alsa, etc.
>
> And the graphics are still bad. I'll contact you again
> next week after I
> get the laptop running fully again.
>
> --
> You received this question notification because you are a
> direct
> subscriber of the question.

Revision history for this message
Guillermo Belli (glock24) said : 		#6

Well, sorry you had to reinstall everything, but even though you had no graphical interface, it was fixable. You usually don't have to reinstall with Linux, unless you really, really mess up.

With "sudo apt-get update && sudo apt-get install xserver-xorg-video-intel" you updated your video driver, I don't think you did something wrong. It must be something related to your video BIOS or a driver bug. If the updated driver did not work, you can try updating your BIOS if an update is available.

As for the sound, did it work correctly before?

In general, as a new user, this could come in handy:

http://ubuntuguide.org/wiki/Ubuntu:Intrepid

Revision history for this message
RichPicker (rich-braden) said : 		#7

Thank you for the Ubuntu:Intrepid link.

None of these problems existed with Feisty. I ran Feisty as long as I could. Intrepid is the problem. All these problems arrived with Intrepid. Too much to get a Dell laptop running with Ubuntu, in my opinion. I've been using Ubuntu since 2007, Dapper, and every time I upgrade I go through this long list of problems.

--- On Thu, 1/29/09, Guillermo Belli <email address hidden> wrote:

> From: Guillermo Belli <email address hidden>
> Subject: Re: [Question #58502]: Poor Graphics and Firefox Performance with Intrepid
> To: <email address hidden>
> Date: Thursday, January 29, 2009, 8:09 AM
> Your question #58502 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/58502
>
> Status: Open => Answered
>
> Guillermo Belli proposed the following answer:
> Well, sorry you had to reinstall everything, but even
> though you had no
> graphical interface, it was fixable. You usually don't
> have to reinstall
> with Linux, unless you really, really mess up.
>
> With "sudo apt-get update && sudo apt-get
> install xserver-xorg-video-
> intel" you updated your video driver, I don't
> think you did something
> wrong. It must be something related to your video BIOS or a
> driver bug.
> If the updated driver did not work, you can try updating
> your BIOS if an
> update is available.
>
> As for the sound, did it work correctly before?
>
> In general, as a new user, this could come in handy:
>
> http://ubuntuguide.org/wiki/Ubuntu:Intrepid
>
> --
> If this answers your question, please go to the following
> page to let us
> know that it is solved:
> https://answers.launchpad.net/ubuntu/+question/58502/+confirm?answer_id=5
>
> If you still need help, you can reply to this email or go
> to the
> following page to enter your feedback:
> https://answers.launchpad.net/ubuntu/+question/58502
>
> You received this question notification because you are a
> direct
> subscriber of the question.

Revision history for this message
RichPicker (rich-braden) said : 		#8

Reading the link you sent me, I realize I have been stupid to switch to Intrepid, because it is not LTS. The person who raved about how wonderful Intrepid is told me it is LTS. I made a mistake. Sorry for bothering you.

--- On Thu, 1/29/09, Guillermo Belli <email address hidden> wrote:

> From: Guillermo Belli <email address hidden>
> Subject: Re: [Question #58502]: Poor Graphics and Firefox Performance with Intrepid
> To: <email address hidden>
> Date: Thursday, January 29, 2009, 8:09 AM
> Your question #58502 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/58502
>
> Status: Open => Answered
>
> Guillermo Belli proposed the following answer:
> Well, sorry you had to reinstall everything, but even
> though you had no
> graphical interface, it was fixable. You usually don't
> have to reinstall
> with Linux, unless you really, really mess up.
>
> With "sudo apt-get update && sudo apt-get
> install xserver-xorg-video-
> intel" you updated your video driver, I don't
> think you did something
> wrong. It must be something related to your video BIOS or a
> driver bug.
> If the updated driver did not work, you can try updating
> your BIOS if an
> update is available.
>
> As for the sound, did it work correctly before?
>
> In general, as a new user, this could come in handy:
>
> http://ubuntuguide.org/wiki/Ubuntu:Intrepid
>
> --
> If this answers your question, please go to the following
> page to let us
> know that it is solved:
> https://answers.launchpad.net/ubuntu/+question/58502/+confirm?answer_id=5
>
> If you still need help, you can reply to this email or go
> to the
> following page to enter your feedback:
> https://answers.launchpad.net/ubuntu/+question/58502
>
> You received this question notification because you are a
> direct
> subscriber of the question.

Revision history for this message
Guillermo Belli (glock24) said : 		#9

Intrepid is not an LTS release; The last LTS was 8.04 (Feisty), and the next LTS will come out around 2010 (they come out about every two years). Every six months there's a "point release", so a few days ago 8.04.2 was released.

There's nothing wrong in using a non-LTS release. Intrepid has been flawless for me, and I've installed it in various computers with very different hardware, but as in your case, sometimes something goes wrong and ugly.

If Feisty works for you and you don't mind not using the latest version, they stick with it. You'll have security updates for 2+ more years.

And it is always a pleasure to help.

Revision history for this message
RichPicker (rich-braden) said : 		#10

I left Feisty because the repositories are gone or moved. I was told by a senior Help Member to switch to Intrepid - that is works better.
It takes up to 65 seconds for a touchpad tap to register. Am I to just go back to Feisty? There is no willingness to identify and solve any problems? Are problems an inconvenience? Confused...

--- On Thu, 1/29/09, Guillermo Belli <email address hidden> wrote:

> From: Guillermo Belli <email address hidden>
> Subject: Re: [Question #58502]: Poor Graphics and Firefox Performance with Intrepid
> To: <email address hidden>
> Date: Thursday, January 29, 2009, 7:54 PM
> Your question #58502 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/58502
>
> Status: Open => Answered
>
> Guillermo Belli proposed the following answer:
> Intrepid is not an LTS release; The last LTS was 8.04
> (Feisty), and the
> next LTS will come out around 2010 (they come out about
> every two
> years). Every six months there's a "point
> release", so a few days ago
> 8.04.2 was released.
>
> There's nothing wrong in using a non-LTS release.
> Intrepid has been
> flawless for me, and I've installed it in various
> computers with very
> different hardware, but as in your case, sometimes
> something goes wrong
> and ugly.
>
> If Feisty works for you and you don't mind not using
> the latest version,
> they stick with it. You'll have security updates for 2+
> more years.
>
> And it is always a pleasure to help.
>
> --
> If this answers your question, please go to the following
> page to let us
> know that it is solved:
> https://answers.launchpad.net/ubuntu/+question/58502/+confirm?answer_id=8
>
> If you still need help, you can reply to this email or go
> to the
> following page to enter your feedback:
> https://answers.launchpad.net/ubuntu/+question/58502
>
> You received this question notification because you are a
> direct
> subscriber of the question.

Revision history for this message
RichPicker (rich-braden) said : 		#11

Solved. Finally.
Compiz was causing the slowness and poor graphics. I removed Compiz and now it works perfectly.