would compiz fuison work with my vga
> lspci | grep VGA"
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter
Please help i have a presentation at our school for Ubuntu and ow it is better then windows so i need those effects
I did try to follow this sight http://
Question information
- Language:
- English Edit question
- Status:
- Solved
- For:
- Ubuntu compiz Edit question
- Assignee:
- No assignee Edit question
- Solved by:
- Wrwrwr
- Solved:
- Last query:
- Last reply:
Revision history for this message
|
#1 |
also one more thins is that some of my screen savers run in a jerky motion but when i had windows i use to play games like cs day of defet and watch high def movies
Revision history for this message
|
#2 |
Dear o.k,
I am unsure as to what you are asking; however, I believe that it can be one of two things:
1. Does the Compiz Fusion software support my particular architecture?
2. Does my video card have the right "specs" to run Compiz Fusion nicely?
To clarify, please tell me if you are asking Question 1 or Question 2. Also, can you please provide some more information about the video card in your computer? For instance: the amount of on-board memory.
Revision history for this message
|
#3 |
well i am asking both question the amount of memory i have is 70gb when i go to applications and click disk usage analyzer how can i provide you more info
Revision history for this message
|
#4 |
When he means memory, hes talking about RAM, or the video card memory.
Revision history for this message
|
#5 |
if i was at windows i would tell you that but i am new to linex so can u gide me sorry for my dumbness
Revision history for this message
|
#6 |
help please you dont know how much i need this
Revision history for this message
|
#7 |
Dear o.k,
To get the amount of memory that your video card has, please run the command "lspci -v -s 01:00.0" (without the quotation marks) in the terminal of your choice.
If you are still stuck, follow the guide given here: http://
Revision history for this message
|
#8 |
can u please stay with here
it say bad commadnd
Revision history for this message
|
#9 |
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter (prog-if 00 [VGA])
Subsystem: Acer Incorporated [ALI] Unknown device 0083
Flags: 66MHz, medium devsel, IRQ 7
BIST result: 00
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Memory at e2100000 (32-bit, non-prefetchable) [size=128K]
I/O ports at a000 [size=128]
Revision history for this message
|
#10 |
Dear o.k,
So you have a 128MB video card. With respect to performance, this is more than sufficient to run Compiz Fusion.
Now, have you installed Ubuntu on the computer that you are referring to?
Revision history for this message
|
#11 |
please stay with me here i have 7.10 running i dont know if it is kbuntu or gutty gibbson mind my spelling i WANT to CRY
Revision history for this message
|
#12 |
I dont think it would matter. You probably have ubuntu if the theme is orange. Kubuntu if the theme is blue.
Have you enabled the proprietary drivers? Have you tried enabling advanced desktop effects?
Revision history for this message
|
#13 |
can you stay with me i am right here sitting on here yes i go go to visual effects
Revision history for this message
|
#14 |
how do i enable the proprietary drivers
Revision history for this message
|
#15 |
Hello to have compiz fusion enabled on your system:
you need to have extra repositories enabled..
To enable all the software repositories do
Go to system --> Preferences --> Software sources
Under the Ubuntu software sources check all the available boxes (Note: just in case if you want 3rd party softwares check everything)
Now all the software repositories enabled, in ubuntu 7.10..
and execute sudo apt-get update command in a terminal (applications -> accessories -> terminal)
that should load all the repositories..
For more info on enabling the repositories ref:
http://
Then to install Compiz fusion refer the link you had earlier referred
i.e
http://
and install compiz fusion (its a nice site with some great screenshots)
and below are the most used short cuts:
SUPER+SHIFT+DRAG LEFT MOUSE = draw fire
SUPER+SHIFT+C = clear fire
CTRL+ALT+DRAG LEFT MOUSE = rotate cube
CTRL+ALT+LEFT ARROW = rotate cube
CTRL+ALT+DOWN ARROW = flat desktop
SHIFT+ALT+
CTRL+ALT+
ALT+TAB=window switch
SUPER+TAB=flip switcher or ring switcher depending on which is enabled.
ALT+F7=initiate 'move windows'
SHIFT+F9=water effect
SHIFT+F10=slow animations
CTRL+ALT+D=show desktop
For Grouping and Tabbing:
SUPER+S=Select Single Window
SUPER+T=Tab Group
SUPER+Left=Change Left Tab
SUPER+Right=Change Right Tab
SUPER+G=Group Windows
SUPER+U=Ungroup Windows
SUPER+R=Remove Group Window
SUPER+C=Close Group
SUPER+X=Ignore Group
hold the super button then select the windows you want to group and then hit super+g
also You can add new shortcuts.. all that you have to do is just you can select one of the plugin(double click on it) and in actions tab of the plugin, under bindings you can change the shortcuts. You can even add a screen edge as a binding so that when you move your mouse cursor to screen edge(say top left) compiz will execute the particular action. It goes really nice with expo plugin. have a great time with compiz fusion!
(the one with windows logo on it (in some keyboards along with windows logo "start" is printed)
This is the super key..
And dont worry the community is there to help you out in crisis...:)
Enjoy!
Bhavani Shankar.
Revision history for this message
|
#16 |
thanks when i go in soft ware sources when i check all of them it should i revet it
Revision history for this message
|
#17 |
in the terminal it says apt 0.7.6ubuntu14 for i386 compiled on Oct 15 2007 20:39:10
Usage: apt-get [options] command
apt-get [options] install|remove pkg1 [pkg2 ...]
apt-get [options] source pkg1 [pkg2 ...]
apt-get is a simple command line interface for downloading and
installing packages. The most frequently used commands are update
and install.
Commands:
update - Retrieve new lists of packages
upgrade - Perform an upgrade
install - Install new packages (pkg is libc6 not libc6.deb)
remove - Remove packages
purge - Remove and purge packages
source - Download source archives
build-dep - Configure build-dependencies for source packages
dist-upgrade - Distribution upgrade, see apt-get(8)
dselect-upgrade - Follow dselect selections
clean - Erase downloaded archive files
autoclean - Erase old downloaded archive files
check - Verify that there are no broken dependencies
Options:
-h This help text.
-q Loggable output - no progress indicator
-qq No output except for errors
-d Download only - do NOT install or unpack archives
-s No-act. Perform ordering simulation
-y Assume Yes to all queries and do not prompt
-f Attempt to continue if the integrity check fails
-m Attempt to continue if archives are unlocatable
-u Show a list of upgraded packages as well
-b Build the source package after fetching it
-V Show verbose version numbers
-c=? Read this configuration file
-o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp
See the apt-get(8), sources.list(5) and apt.conf(5) manual
pages for more information and options.
omar@omar-laptop:~$
Revision history for this message
|
#18 |
i am real nerves see the thing is why do my screen savers specially the 3d onces work in a jerky motion if that is the case i dont think compez would do so well or wont work any way i will give it a try any tips
Revision history for this message
|
#19 |
plus the sight supports the ati mobilty radon i have the lspci | grep VGA"
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapte
ANy help their
Revision history for this message
|
#20 |
Did you try executing the sudo apt-get update command in a terminal? (applications -> accessories -> terminal) Like this:
bhavi@gutsy:~$ sudo apt-get update
after checking everything in the software sources?
and please dont get nervous and go through my previous answer carefully and give it a try..
Bhavani Shankar.
Revision history for this message
|
#21 |
i am a bit confused about the terminal i posed what i got what should i chek for
Revision history for this message
|
#23 |
what should i look for in the terminal
Revision history for this message
|
#24 |
that message comes when you have entered a command wrongly mate, just right click copy and paste this in the terminal..
sudo apt-get update
Dont get nervous, relax and cooldown...
Bhavani Shankar.
Revision history for this message
|
#25 |
no message comes up in the terminal so is all well till now
Revision history for this message
|
#26 |
Ign cdrom://Ubuntu 7.10 _Gutsy Gibbon_ - Release i386 (20071016) gutsy/main Translation-en_CA
Ign cdrom://Ubuntu 7.10 _Gutsy Gibbon_ - Release i386 (20071016) gutsy/restricted Translation-en_CA
Get:1 http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Fetched 1B in 0s (1B/s)
Reading package lists... Done
omar@omar-laptop:~$
This is what i got thiS TIME
Revision history for this message
|
#27 |
thats good.. Now please carefully read the rest of my answer above..
Revision history for this message
|
#28 |
can you post it again just for insurance
Revision history for this message
|
#29 |
Sure:
o enable all the software repositories do
Go to system --> Preferences --> Software sources
Under the Ubuntu software sources check all the available boxes (Note: just in case if you want 3rd party softwares check everything)
Now all the software repositories enabled, in ubuntu 7.10..
and execute sudo apt-get update command in a terminal (applications -> accessories -> terminal)
that should load all the repositories..
For more info on enabling the repositories ref:
http://
Then to install Compiz fusion refer the link you had earlier referred
i.e
http://
and install compiz fusion (its a nice site with some great screenshots)
and below are the most used short cuts:
SUPER+SHIFT+DRAG LEFT MOUSE = draw fire
SUPER+SHIFT+C = clear fire
CTRL+ALT+DRAG LEFT MOUSE = rotate cube
CTRL+ALT+LEFT ARROW = rotate cube
CTRL+ALT+DOWN ARROW = flat desktop
SHIFT+ALT+
CTRL+ALT+
ALT+TAB=window switch
SUPER+TAB=flip switcher or ring switcher depending on which is enabled.
ALT+F7=initiate 'move windows'
SHIFT+F9=water effect
SHIFT+F10=slow animations
CTRL+ALT+D=show desktop
For Grouping and Tabbing:
SUPER+S=Select Single Window
SUPER+T=Tab Group
SUPER+Left=Change Left Tab
SUPER+Right=Change Right Tab
SUPER+G=Group Windows
SUPER+U=Ungroup Windows
SUPER+R=Remove Group Window
SUPER+C=Close Group
SUPER+X=Ignore Group
hold the super button then select the windows you want to group and then hit super+g
also You can add new shortcuts.. all that you have to do is just you can select one of the plugin(double click on it) and in actions tab of the plugin, under bindings you can change the shortcuts. You can even add a screen edge as a binding so that when you move your mouse cursor to screen edge(say top left) compiz will execute the particular action. It goes really nice with expo plugin. have a great time with compiz fusion!
(the one with windows logo on it (in some keyboards along with windows logo "start" is printed)
This is the super key..
And dont worry the community is there to help you out in crisis...:)
Enjoy!
Bhavani Shankar.
Revision history for this message
|
#30 |
I hate to be the bringer of bad news, and my information is outdated by six months, but as far as I know you cannot get 3d desktop effects running on SiS chips. I hope I am wrong (and I will be monitoring this thread in case I am), but a quick google turns up this:
http://
I have exactly the same video chip as you in my laptop. Sadly compiz/beryl have never worked for me, due to the lack of decent drivers from SiS.
Revision history for this message
|
#31 |
I was very afraid of that does your screen savers move in a jerky motion to
Revision history for this message
|
#32 |
Call me boring, but my screen saver is a black screen which doesn't move (by choice).
Yes anything to do with 3d graphics on my laptop is slow and skips. This includes games like planet penguin racer; nifty space simulation things like celestia and anything else that uses 3d rendering.
This may all change one day, if SiS decides to release some drivers for Linux (ATI and nVidia both do), or if developers are able to reverse engineer the SiS chip.
Revision history for this message
|
#33 |
is there any way i could change my chip and if i can do that how much am i looking at for a lab top i know for a desk top it is easy
Bhavani Shankar any plans lol
Revision history for this message
|
#34 |
Allen chemist but my screens do move but in a jerky motion like every screen saver works but the ones with 3d are like laging i dont get a black though
Revision history for this message
|
#35 |
If this is in a laptop, it is highly unlikely it is changeable... mine isn't but I have heard some dells are changeable. It would be best to talk to whoever made the laptop and see if you can upgrade the video card.
For your presentation you could focus on the other features of linux, such as the package update system. It is much better than windows update, since it keeps all your software up to date.
If that's too business-ey and not cool enough, try MythTV (www.mythtv.org), that's some nifty software to record tv, like a TiVo does (only on steroids -- I can set recordings and watch them over the internet from my home computer). Note to do this you would need a capture card, but you can still play around with Mythtv because it also rips DVDs, plays music, shows the weather forecast and other stuff. It does require a bit of configuration and tweaking so if your presentation is soon maybe leave myth out to familiarize yourself to it.
Install kstars -- it is a desktop planetarium software which allows you to map the sky where you are. If you have a serial telescope, it can aim the telescope at certain things. Right click and download images from the Hubble telescope and others for particular points in the sky.
Like listening to music? Try installing and playing with Amarok, one of the best music players and organizers. I haven't found anything to equal amarok in ability for organization of music, transferring to devices (like ipods), showing lyrics and statistics on what I listen to.
All of these items can be installed by going to System -> Administration -> Synaptic Package Manager, and searching for the names.
Revision history for this message
|
#36 |
Black screensavers are my choice. I disabled the fancy one in favour of the black, since it uses less power when on battery (no processor required to calculate the pretty pictures). If I do any of the 3d desktops, they do skip.
Revision history for this message
|
#38 |
Anytime, and sorry to be the bringer of bad news.
Also can you mark this question as solved, just so I don't see the "open" in my list of active calls.
Revision history for this message
|
#39 |
Thanks Allen Chemist, that solved my question.
Revision history for this message
|
#40 |
Ok got your problem solved.... Thats great...... but be more clearer in your question and please improve upon your english...
Revision history for this message
|
#41 |
i did not get my problem solved, i still can not run compiz fusion
Revision history for this message
|
#42 |
By the way would this help. Your system does not have the required software to enable 3D mode. Please contact your system administrator and ask them to install the OpenGL Python bindings and the GtkGLExt Python bindings. can i do this.
Revision history for this message
|
#43 |
Dear o.k,
I'm sorry for not being able to stay and help, but we all need to sleep sometime ^_^
Okay, so I see that you are having problems enabling 3D support. Have installed the appropriate drivers for your graphics card?
To see if your graphics card requires restricted drivers, please run the command: "restricted-manager &" from a terminal. The interface for it is fairly straight-forward.
If your graphics card does not require restricted drivers, we will have to find another solution.
Revision history for this message
|
#44 |
i am real sorry lol, hope you had a good sleep, i did exactly what you said. what i got was restricted driver window and in that i got 2 choices driver software modem driver and the status is not to use and beneath that i frimware for broad com 43xx chipset family and the status is not in use can you guide me from here thanks a million
Revision history for this message
|
#46 |
Dear o.k,
It appears that your graphics card does not need restricted drivers; however, I fear that Allen Chemist may be correct when he claimed that the 3D-rendering for your graphics card is largely unsupported at this time. I'm sorry for not delving into this problem further before attempting to help you work through it.
I will continue to look around google for a possible solution.
Revision history for this message
|
#48 |
I guess your card goes into the 315 series, although i'm not an expert when it comes to the SiS chips. There are some drivers for SiS cards in development but not for this series. You can refer to this page to check the status: http://
Unfortunately that means that there is no support for accelerated graphics for your card and it won't change shortly.
Revision history for this message
|
#49 |
Thanks Wrwrwr, that solved my question.