Logitech, quick cam zoom 8.04

Asked by Jan Tijssen on 2009-08-07

My Logitec Web cam (LTS 8.04) does not work, however:
lsusb gives:
Bus 005 Device 005: ID 0baf:0121 U.S. Robotics
Bus 005 Device 003: ID 03f0:2605 Hewlett-Packard
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard Receiver
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 003: ID 046d:08b4 Logitech, Inc. QuickCam Zoom
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

When I disconnect and reconnect this Webcam, it works like a charm, Skype, Camorama (can adjust settings) etc.

But why does it not work when booted/ from boot and starts working when I disconnect en reconnect the WEBCAM.
FYI, Build in (in WEB-cam) Microphone works fine

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu cheese Edit question
Assignee:
No assignee Edit question
Solved by:
Jan Tijssen
Solved:
2009-08-15
Last query:
2009-08-15
Last reply:
2009-08-08

try restarting hal when you first boot, if that makes it work then add the command or a script with the command in when you log on.

sudo /etc/init.d/hal restart

Logitech do not support linux to well so you will have to work around what has been developed to make them work.

Jan Tijssen (tijssen-jan) said : #2

This does not solve the problem. Same same thing.
Only disconnect en reconnect does do the job.

I must say, -maybe this helps- the problem started after installing cheese (which did not work, so I uninstalled it-.
Before the camera worked for months.....

possibly, try installing cheese again. See if its nice.

You could also read through

dmesg | less

to see your system wake up and it may give clues as to why it is dropping the camera. If you also read through:

sudo lshw | less

you may see a module associated with the camera which you can them rmmod then immediately modprobe to maybe get the device working.

Jan Tijssen (tijssen-jan) said : #4

Hello actionparsnip,

thank you for the response.
I have installed cheese, no change. I got a colofull display with in the right down corner en "noise" screen.
When I diconnect and reconnect the camera, cheese works also great.
(Did not test the connect/ disconnect thing before)

The rest of the message is somthing beyond my "know-how" and experience. I need a more detailed instruction..... sorry, I just switched over to Ubuntu completely and uses Windows only for "word" and "Excel".
This is my dmesg output after connect/ disconnect:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-24-generic (buildd@rothera) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Fri Jul 24 22:46:06 UTC 2009 (Ubuntu 2.6.24-24.57-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f686c00 (usable)
[ 0.000000] BIOS-e820: 000000007f686c00 - 000000007f688c00 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f688c00 - 000000007f68ac00 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f68ac00 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 1142MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fe710
[ 0.000000] Entering add_active_range(0, 0, 521862) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 521862
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 521862
[ 0.000000] On node 0 totalpages: 521862
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2285 pages used for memmap
[ 0.000000] HighMem zone: 290201 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FEB00 checksum 0
[ 0.000000] ACPI: RSDP 000FEB00, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 000FD24F, 005C (r1 DELL GX620 6 ASL 61)
[ 0.000000] ACPI: FACP 000FD347, 00F4 (r3 DELL GX620 6 ASL 61)
[ 0.000000] ACPI: DSDT FFFD6336, 3D4F (r1 DELL dt_ex 1000 INTL 20050211)
[ 0.000000] ACPI: FACS 7F686C00, 0040
[ 0.000000] ACPI: SSDT FFFDA199, 00A4 (r1 DELL st_ex 1000 INTL 20050211)
[ 0.000000] ACPI: APIC 000FD43B, 0072 (r1 DELL GX620 6 ASL 61)
[ 0.000000] ACPI: BOOT 000FD4AD, 0028 (r1 DELL GX620 6 ASL 61)
[ 0.000000] ACPI: ASF! 000FD4D5, 0067 (r16 DELL GX620 6 ASL 61)
[ 0.000000] ACPI: MCFG 000FD53C, 003E (r1 DELL GX620 6 ASL 61)
[ 0.000000] ACPI: HPET 000FD57A, 0038 (r1 DELL GX620 6 ASL 61)
[ 0.000000] ACPI: DMI detected: Dell
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517785
[ 0.000000] Kernel command line: root=UUID=942a4a1d-65b8-430d-9c6a-ac4a1abb8099 ro
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2793.189 MHz processor.
[ 10.708442] Console: colour VGA+ 80x25
[ 10.708447] console [tty0] enabled
[ 10.711299] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 10.711722] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 10.835058] Memory: 2057252k/2087448k available (2181k kernel code, 29048k reserved, 1006k data, 368k init, 1169944k highmem)
[ 10.835128] virtual kernel memory layout:
[ 10.835129] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 10.835130] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 10.835131] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 10.835132] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 10.835133] .init : 0xc0423000 - 0xc047f000 ( 368 kB)
[ 10.835134] .data : 0xc0321538 - 0xc041cdc4 (1006 kB)
[ 10.835135] .text : 0xc0100000 - 0xc0321538 (2181 kB)
[ 10.835447] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 10.835568] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 10.835717] hpet clockevent registered
[ 10.915586] Calibrating delay using timer specific routine.. 5591.46 BogoMIPS (lpj=11182922)
[ 10.915685] Security Framework initialized
[ 10.915728] SELinux: Disabled at boot.
[ 10.915781] AppArmor: AppArmor initialized
[ 10.915822] Failure registering capabilities with primary security module.
[ 10.915872] Mount-cache hash table entries: 512
[ 10.916048] Initializing cgroup subsys ns
[ 10.916092] Initializing cgroup subsys cpuacct
[ 10.916144] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000000 00000000
[ 10.916153] monitor/mwait feature present.
[ 10.916193] using mwait in idle threads.
[ 10.916234] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 10.916298] CPU: L2 cache: 1024K
[ 10.916336] CPU: Physical Processor ID: 0
[ 10.916377] CPU: After all inits, caps: bfebfbff 20000000 00000000 00043180 0000641d 00000000 00000000 00000000
[ 10.916388] Compat vDSO mapped to ffffe000.
[ 10.916443] Checking 'hlt' instruction... OK.
[ 10.932053] SMP alternatives: switching to UP code
[ 10.934074] Early unpacking initramfs... done
[ 11.263573] ACPI: Core revision 20070126
[ 11.320884] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 11.407786] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
[ 11.407890] SMP alternatives: switching to SMP code
[ 11.408776] Booting processor 1/1 eip 3000
[ 11.418919] Initializing CPU#1
[ 11.498587] Calibrating delay using timer specific routine.. 5586.29 BogoMIPS (lpj=11172582)
[ 11.498598] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000000 00000000
[ 11.498606] monitor/mwait feature present.
[ 11.498612] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 11.498614] CPU: L2 cache: 1024K
[ 11.498617] CPU: Physical Processor ID: 0
[ 11.498620] CPU: After all inits, caps: bfebfbff 20000000 00000000 00043180 0000641d 00000000 00000000 00000000
[ 11.499010] CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
[ 11.499378] Total of 2 processors activated (11177.75 BogoMIPS).
[ 11.499571] ENABLING IO-APIC IRQs
[ 11.499790] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 11.646483] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 11.666529] Brought up 2 CPUs
[ 11.666594] CPU0 attaching sched-domain:
[ 11.666598] domain 0: span 03
[ 11.666600] groups: 01 02
[ 11.666605] domain 1: span 03
[ 11.666607] groups: 03
[ 11.666610] CPU1 attaching sched-domain:
[ 11.666611] domain 0: span 03
[ 11.666613] groups: 02 01
[ 11.666617] domain 1: span 03
[ 11.666619] groups: 03
[ 11.666918] net_namespace: 64 bytes
[ 11.666970] Booting paravirtualized kernel on bare hardware
[ 11.667659] Time: 18:09:41 Date: 08/07/09
[ 11.667724] NET: Registered protocol family 16
[ 11.668048] EISA bus registered
[ 11.668091] ACPI: bus type pci registered
[ 11.693234] PCI: PCI BIOS revision 2.10 entry at 0xfb894, last bus=4
[ 11.693276] PCI: Using configuration type 1
[ 11.693337] Setting up standard PCI resources
[ 11.702558] ACPI: EC: Look up EC in DSDT
[ 11.735064] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 11.735107] ACPI: If "acpi_osi=Linux" works better, please notify <email address hidden>
[ 11.746432] ACPI: Interpreter enabled
[ 11.746472] ACPI: (supports S0 S1 S3 S4 S5)
[ 11.746639] ACPI: Using IOAPIC for interrupt routing
[ 11.814284] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 11.815076] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 11.815120] PCI quirk: region 0880-08bf claimed by ICH6 GPIO
[ 11.815779] PCI: Transparent bridge - 0000:00:1e.0
[ 11.815853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 11.816615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 11.817220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 11.817514] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
[ 11.817814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 12.882998] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 12.883752] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 12.884478] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 12.885227] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 12.886013] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 12.886742] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 12.887507] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 12.888227] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 12.888870] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 12.888955] pnp: PnP ACPI init
[ 12.888999] ACPI: bus type pnp registered
[ 12.933211] pnpacpi: exceeded the max number of IO resources: 40
[ 12.933340] pnp: PnP ACPI: found 10 devices
[ 12.933378] ACPI: ACPI bus type pnp unregistered
[ 12.933420] PnPBIOS: Disabled by ACPI PNP
[ 12.933792] PCI: Using ACPI for IRQ routing
[ 12.933833] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 12.960302] NET: Registered protocol family 8
[ 12.960341] NET: Registered protocol family 20
[ 12.960426] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 12.960557] hpet0: 3 64-bit timers, 14318180 Hz
[ 12.961634] AppArmor: AppArmor Filesystem Enabled
[ 12.964072] Time: tsc clocksource has been installed.
[ 12.964128] Switched to high resolution mode on CPU 0
[ 12.964289] Switched to high resolution mode on CPU 1
[ 12.973000] system 00:01: ioport range 0x800-0x85f has been reserved
[ 12.973045] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 12.973088] system 00:01: ioport range 0x860-0x8ff could not be reserved
[ 12.973139] system 00:08: iomem range 0x0-0x9ffff could not be reserved
[ 12.973182] system 00:08: iomem range 0x100000-0xffffff could not be reserved
[ 12.973224] system 00:08: iomem range 0x1000000-0x7f686bff could not be reserved
[ 12.973276] system 00:08: iomem range 0xf0000-0xfffff could not be reserved
[ 12.973318] system 00:08: iomem range 0xc0000-0xcffff could not be reserved
[ 12.973361] system 00:08: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 12.973413] system 00:08: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 12.973465] system 00:08: iomem range 0xfed20000-0xfed9ffff could not be reserved
[ 12.973518] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 12.973570] system 00:08: iomem range 0xffc00000-0xffffffff could not be reserved
[ 12.973626] system 00:09: ioport range 0x100-0x1fe could not be reserved
[ 12.973667] system 00:09: ioport range 0x200-0x277 has been reserved
[ 12.973709] system 00:09: ioport range 0x280-0x2e7 has been reserved
[ 12.973751] system 00:09: ioport range 0x2f0-0x2f7 has been reserved
[ 12.973792] system 00:09: ioport range 0x300-0x377 could not be reserved
[ 12.974490] system 00:09: ioport range 0x380-0x3bb has been reserved
[ 12.974533] system 00:09: ioport range 0x3c0-0x3e7 could not be reserved
[ 12.974575] system 00:09: ioport range 0x3f6-0x3f7 could not be reserved
[ 12.974616] system 00:09: ioport range 0x400-0x4cf has been reserved
[ 12.974658] system 00:09: ioport range 0x4d2-0x57f has been reserved
[ 12.974700] system 00:09: ioport range 0x580-0x677 has been reserved
[ 12.974741] system 00:09: ioport range 0x680-0x777 has been reserved
[ 12.974782] system 00:09: ioport range 0x780-0x7bb has been reserved
[ 12.974823] system 00:09: ioport range 0x7c0-0x7ff has been reserved
[ 12.974864] system 00:09: ioport range 0x8e0-0x8ff has been reserved
[ 12.974904] system 00:09: ioport range 0x900-0x9fe has been reserved
[ 12.974946] system 00:09: ioport range 0xa00-0xafe has been reserved
[ 12.974988] system 00:09: ioport range 0xb00-0xbfe has been reserved
[ 12.975028] system 00:09: ioport range 0xc80-0xcaf has been reserved
[ 12.975071] system 00:09: ioport range 0xcb0-0xcbf has been reserved
[ 12.975113] system 00:09: ioport range 0xcc0-0xcf7 has been reserved
[ 12.975153] system 00:09: ioport range 0xd00-0xdfe has been reserved
[ 12.975194] system 00:09: ioport range 0xe00-0xefe has been reserved
[ 12.975236] system 00:09: ioport range 0xf00-0xffe has been reserved
[ 12.975276] system 00:09: ioport range 0x2000-0x20fe has been reserved
[ 12.975317] system 00:09: ioport range 0x2100-0x21fe has been reserved
[ 12.975359] system 00:09: ioport range 0x2200-0x22fe has been reserved
[ 12.975401] system 00:09: ioport range 0x2300-0x23fe has been reserved
[ 12.975442] system 00:09: ioport range 0x2400-0x24fe has been reserved
[ 12.975484] system 00:09: ioport range 0x2500-0x25fe has been reserved
[ 12.975526] system 00:09: ioport range 0x2600-0x26fe has been reserved
[ 12.975567] system 00:09: ioport range 0x2700-0x27fe has been reserved
[ 12.975608] system 00:09: ioport range 0x2800-0x28fe has been reserved
[ 12.975650] system 00:09: ioport range 0x2900-0x29fe has been reserved
[ 12.975691] system 00:09: ioport range 0x2a00-0x2afe has been reserved
[ 12.975732] system 00:09: ioport range 0x2b00-0x2bfe has been reserved
[ 12.975774] system 00:09: ioport range 0x2c00-0x2cfe has been reserved
[ 12.975816] system 00:09: ioport range 0x2d00-0x2dfe has been reserved
[ 12.975857] system 00:09: ioport range 0x2e00-0x2efe has been reserved
[ 12.975899] system 00:09: ioport range 0x2f00-0x2ffe has been reserved
[ 12.975943] system 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 12.975998] system 00:09: iomem range 0xfeda0000-0xfedacfff has been reserved
[ 13.006600] PCI: Bridge: 0000:00:01.0
[ 13.006640] IO window: disabled.
[ 13.006680] MEM window: fe900000-fe9fffff
[ 13.006719] PREFETCH window: disabled.
[ 13.006759] PCI: Bridge: 0000:00:1c.0
[ 13.006797] IO window: disabled.
[ 13.006838] MEM window: fe800000-fe8fffff
[ 13.006877] PREFETCH window: disabled.
[ 13.006917] PCI: Bridge: 0000:00:1c.1
[ 13.006954] IO window: disabled.
[ 13.006995] MEM window: fe700000-fe7fffff
[ 13.007034] PREFETCH window: disabled.
[ 13.007075] PCI: Bridge: 0000:00:1e.0
[ 13.007111] IO window: disabled.
[ 13.007152] MEM window: disabled.
[ 13.007191] PREFETCH window: disabled.
[ 13.007247] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 13.007326] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 13.007347] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 13.007424] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 13.007445] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 13.007521] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 13.007533] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 13.007546] NET: Registered protocol family 2
[ 13.044907] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 13.045281] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 13.045973] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 13.046340] TCP: Hash tables configured (established 131072 bind 65536)
[ 13.046381] TCP reno registered
[ 13.057003] checking if image is initramfs... it is
[ 13.706091] Freeing initrd memory: 7719k freed
[ 13.706315] Simple Boot Flag at 0x7a set to 0x1
[ 13.706913] audit: initializing netlink socket (disabled)
[ 13.706965] audit(1249668582.752:1): initialized
[ 13.707262] highmem bounce pool size: 64 pages
[ 13.709932] VFS: Disk quotas dquot_6.5.1
[ 13.710068] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 13.710269] io scheduler noop registered
[ 13.710308] io scheduler anticipatory registered
[ 13.710346] io scheduler deadline registered
[ 13.710395] io scheduler cfq registered (default)
[ 13.710446] Boot video device is 0000:00:02.0
[ 13.710655] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 13.710701] assign_interrupt_mode Found MSI capability
[ 13.710777] Allocate Port Service[0000:00:01.0:pcie00]
[ 13.710879] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 13.710926] assign_interrupt_mode Found MSI capability
[ 13.711000] Allocate Port Service[0000:00:1c.0:pcie00]
[ 13.711053] Allocate Port Service[0000:00:1c.0:pcie02]
[ 13.711157] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 13.711205] assign_interrupt_mode Found MSI capability
[ 13.711280] Allocate Port Service[0000:00:1c.1:pcie00]
[ 13.711329] Allocate Port Service[0000:00:1c.1:pcie02]
[ 13.711662] isapnp: Scanning for PnP cards...
[ 14.062801] isapnp: No Plug & Play device found
[ 14.102721] Real Time Clock Driver v1.12ac
[ 14.102885] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 14.103078] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 14.103963] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 14.105053] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 14.105189] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 14.105445] PNP: No PS/2 controller found. Probing ports directly.
[ 14.108026] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 14.108072] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 14.126104] mice: PS/2 mouse device common for all mice
[ 14.126310] EISA: Probing bus 0 at eisa.0
[ 14.126350] EISA: Cannot allocate resource for mainboard
[ 14.126395] Cannot allocate resource for EISA slot 2
[ 14.126456] EISA: Detected 0 cards.
[ 14.126494] cpuidle: using governor ladder
[ 14.126533] cpuidle: using governor menu
[ 14.126658] NET: Registered protocol family 1
[ 14.126729] Using IPI No-Shortcut mode
[ 14.126798] registered taskstats version 1
[ 14.126942] Magic number: 5:64:190
[ 14.127015] hash matches device ttys2
[ 14.127127] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 14.127168] EDD information not available.
[ 14.127434] Freeing unused kernel memory: 368k freed
[ 14.127499] Write protecting the kernel read-only data: 802k
[ 14.366032] fuse init (API version 7.9)
[ 14.389393] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 14.389511] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 14.811945] tg3.c:v3.86 (November 9, 2007)
[ 14.812024] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 14.812142] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 14.846167] usbcore: registered new interface driver usbfs
[ 14.846247] usbcore: registered new interface driver hub
[ 14.849170] eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:12:3f:96:53:a3
[ 14.849381] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 14.849435] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 14.857824] usbcore: registered new device driver usb
[ 14.873058] USB Universal Host Controller Interface driver v3.0
[ 14.873189] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 18
[ 14.873281] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 14.873287] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 14.873581] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 14.873668] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000ff80
[ 14.873965] usb usb1: configuration #1 chosen from 1 choice
[ 14.874045] hub 1-0:1.0: USB hub found
[ 14.874093] hub 1-0:1.0: 2 ports detected
[ 14.977704] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 19
[ 14.977809] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 14.977816] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 14.977903] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 14.977990] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
[ 14.978224] usb usb2: configuration #1 chosen from 1 choice
[ 14.978312] hub 2-0:1.0: USB hub found
[ 14.978367] hub 2-0:1.0: 2 ports detected
[ 15.006561] SCSI subsystem initialized
[ 15.055524] libata version 3.00 loaded.
[ 15.081591] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 15.081698] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 15.081706] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 15.081792] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 15.081882] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000ff40
[ 15.082136] usb usb3: configuration #1 chosen from 1 choice
[ 15.082221] hub 3-0:1.0: USB hub found
[ 15.082274] hub 3-0:1.0: 2 ports detected
[ 15.185388] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 21
[ 15.185482] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 15.185486] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 15.185551] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 15.185631] uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000ff20
[ 15.185802] usb usb4: configuration #1 chosen from 1 choice
[ 15.185871] hub 4-0:1.0: USB hub found
[ 15.185914] hub 4-0:1.0: 2 ports detected
[ 15.289342] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 18
[ 15.289441] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 15.289448] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 15.289540] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 15.294252] ehci_hcd 0000:00:1d.7: debug port 1
[ 15.294307] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 15.294319] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xffa80800
[ 15.319987] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 15.333068] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 15.333286] usb usb5: configuration #1 chosen from 1 choice
[ 15.333355] hub 5-0:1.0: USB hub found
[ 15.333399] hub 5-0:1.0: 8 ports detected
[ 15.441077] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 15.441226] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 15.441250] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 15.441338] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 22
[ 15.441458] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 15.441475] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 15.447864] ata_piix 0000:00:1f.1: version 2.12
[ 15.447887] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 15.448013] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 15.450509] scsi0 : ata_piix
[ 15.450658] scsi1 : ata_piix
[ 15.454410] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 15.454465] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 15.859382] ata1.00: ATAPI: TSSTcorpCD-ROM TS-L162C, DE00, max UDMA/33
[ 16.118875] ata1.00: configured for UDMA/33
[ 16.118968] ata2: port disabled. ignoring.
[ 16.136165] scsi 0:0:0:0: CD-ROM TSSTcorp CD-ROM TS-L162C DE00 PQ: 0 ANSI: 5
[ 16.136318] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 16.250375] usb 5-4: new high speed USB device using ehci_hcd and address 3
[ 16.290323] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 22
[ 16.290463] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 16.290546] scsi2 : ata_piix
[ 16.290827] scsi3 : ata_piix
[ 16.290904] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 22
[ 16.290947] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 22
[ 16.454374] ata3.00: ATA-6: ST380013AS, 8.12, max UDMA/133
[ 16.454421] ata3.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 16.471326] ata3.00: configured for UDMA/133
[ 16.560515] usb 5-4: configuration #1 chosen from 1 choice
[ 16.985108] usb 5-8: new high speed USB device using ehci_hcd and address 5
[ 17.117823] usb 5-8: configuration #1 chosen from 1 choice
[ 17.296757] scsi 2:0:0:0: Direct-Access ATA ST380013AS 8.12 PQ: 0 ANSI: 5
[ 17.310976] Driver 'sd' needs updating - please use bus_type methods
[ 17.311166] sd 2:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
[ 17.311231] sd 2:0:0:0: [sda] Write Protect is off
[ 17.311285] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 17.311324] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.311463] sd 2:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
[ 17.311523] sd 2:0:0:0: [sda] Write Protect is off
[ 17.311565] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 17.311597] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.311656] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 17.322481] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 17.322529] Uniform CD-ROM driver Revision: 3.20
[ 17.322638] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 17.356475] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 17.379716] sda1 sda2 < sda5 >
[ 17.399773] sd 2:0:0:0: [sda] Attached SCSI disk
[ 17.408601] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 17.408683] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 17.641733] usb 2-1: configuration #1 chosen from 1 choice
[ 17.767274] Attempting manual resume
[ 17.767314] swsusp: Resume From Partition 8:5
[ 17.767316] PM: Checking swsusp image.
[ 17.767486] PM: Resume from disk failed.
[ 17.809884] kjournald starting. Commit interval 5 seconds
[ 17.809899] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.884576] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 18.060032] usb 3-2: configuration #1 chosen from 1 choice
[ 27.360916] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 27.398467] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 28.447848] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 28.494642] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 28.769012] Linux agpgart interface v0.102
[ 28.842152] input: Power Button (FF) as /devices/virtual/input/input1
[ 28.861780] ACPI: Power Button (FF) [PWRF]
[ 28.861983] input: Power Button (CM) as /devices/virtual/input/input2
[ 28.881743] ACPI: Power Button (CM) [VBTN]
[ 28.929957] agpgart: Detected an Intel 945G Chipset.
[ 28.930779] agpgart: Detected 7932K stolen memory.
[ 28.945842] agpgart: AGP aperture is 256M @ 0xe0000000
[ 29.665240] intel_rng: Firmware space is locked read-only. If you can't or
[ 29.665248] intel_rng: don't want to disable this in firmware setup, and if
[ 29.665250] intel_rng: you are certain that your system has a functional
[ 29.665252] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 29.740324] iTCO_vendor_support: vendor-support=0
[ 29.761372] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 29.761553] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 29.761631] iTCO_wdt: No card detected
[ 30.390861] Linux video capture interface: v2.00
[ 30.492861] usbcore: registered new interface driver hiddev
[ 30.507232] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/input/input3
[ 30.534018] input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2
[ 30.564523] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.1/input/input4
[ 30.591030] ieee80211_crypt: registered algorithm 'NULL'
[ 30.601880] input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2
[ 30.602061] usbcore: registered new interface driver usbhid
[ 30.602108] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 30.635999] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 30.636058] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 30.651109] pwc: Philips webcam module version 10.0.13 loaded.
[ 30.651167] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
[ 30.651229] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
[ 30.651287] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
[ 30.651391] pwc: Logitech QuickCam Zoom (new model) USB webcam detected.
[ 30.651486] pwc: Registered as /dev/video0.
[ 30.661513] usbcore: registered new interface driver Philips webcam
[ 30.663182] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 30.901294] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 31.049854] zd1211rw 5-8:1.0: eth1
[ 31.049928] usbcore: registered new interface driver zd1211rw
[ 31.132606] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 31.190063] usbcore: registered new interface driver snd-usb-audio
[ 31.193221] parport_pc 00:06: reported by Plug and Play ACPI
[ 31.193339] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 31.257857] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 23 (level, low) -> IRQ 21
[ 31.257977] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 31.676954] intel8x0_measure_ac97_clock: measured 55006 usecs
[ 31.677002] intel8x0: clocking to 48000
[ 32.297022] udev: renamed network interface eth1 to eth2
[ 32.639834] zd1211rw 5-8:1.0: firmware version 4725
[ 32.679775] zd1211rw 5-8:1.0: zd1211b chip 0baf:0121 v4810 high 00-14-c1 AL2230_RF pa0 g--N-
[ 32.745734] lp0: using parport0 (interrupt-driven).
[ 32.759996] ieee80211_crypt: registered algorithm 'WEP'
[ 32.872046] Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1 across:3004112k
[ 33.266894] SoftMAC: Open Authentication completed with 00:1e:e5:84:ea:a9
[ 33.298835] EXT3 FS on sda1, internal journal
[ 33.556739] device-mapper: uevent: version 1.0.3
[ 33.556788] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: <email address hidden>
[ 36.536946] NET: Registered protocol family 10
[ 36.537351] lo: Disabled Privacy Extensions
[ 45.775359] No dock devices found.
[ 45.777516] ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: found ejectable bay
[ 45.777526] ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: Adding notify handler
[ 45.777580] ACPI: Error installing bay notify handler
[ 45.777585] ACPI: Bay [\_SB_.PCI0.IDE1.PRI1.MAS1] Added
[ 46.858110] eth2: no IPv6 routers present
[ 48.970292] audit(1249668618.990:2): type=1503 operation="capable" name="sys_resource" pid=7531 profile="/usr/sbin/named" namespace="default"
[ 56.631409] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 56.631420] apm: disabled - APM is not SMP safe.
[ 57.241756] ppdev: user-space parallel port driver
[ 57.570982] audit(1249668627.603:3): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=8065 profile="/usr/sbin/cupsd" namespace="default"
[ 58.742164] RPC: Registered udp transport module.
[ 58.742173] RPC: Registered tcp transport module.
[ 58.817328] Installing knfsd (copyright (C) 1996 <email address hidden>).
[ 58.920879] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 58.938414] NFSD: starting 90-second grace period
[ 67.388834] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 67.388844] vboxdrv: Successfully done.
[ 67.388847] vboxdrv: Found 2 processor cores.
[ 67.390022] vboxdrv: fAsync=0 offMin=0x4ad offMax=0x2e98
[ 67.390465] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 67.390475] vboxdrv: Successfully loaded version 2.2.4 (interface 0x000a0009).
[ 69.220830] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 69.254298] Bluetooth: Core ver 2.11
[ 69.254827] NET: Registered protocol family 31
[ 69.254834] Bluetooth: HCI device and connection manager initialized
[ 69.254840] Bluetooth: HCI socket layer initialized
[ 69.269380] Bluetooth: L2CAP ver 2.9
[ 69.269390] Bluetooth: L2CAP socket layer initialized
[ 69.321432] Bluetooth: RFCOMM socket layer initialized
[ 69.321455] Bluetooth: RFCOMM TTY layer initialized
[ 69.321459] Bluetooth: RFCOMM ver 1.8
[ 71.627573] [drm] Initialized drm 1.1.0 20060810
[ 71.631442] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 71.631455] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 71.631541] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 133.364466] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 3096.632863] usb 2-1: USB disconnect, address 3
[ 3096.633589] pwc: Error (-19) re-submitting urb in pwc_isoc_handler.
[ 3096.633598] pwc: Error (-19) re-submitting urb in pwc_isoc_handler.
[ 3096.633891] pwc: Disconnected while webcam is in use!
[ 3099.615927] usb 2-1: new full speed USB device using uhci_hcd and address 4
[ 3099.901624] usb 2-1: configuration #1 chosen from 1 choice
[ 3099.906541] pwc: Logitech QuickCam Zoom (new model) USB webcam detected.
[ 3099.906590] pwc: Registered as /dev/video0.

This is the lshw output:

01-desktop
    description: Space-saving Computer
    product: OptiPlex GX620
    vendor: Dell Inc.
    serial: DX36V1J
    width: 32 bits
    capabilities: smbios-2.3 dmi-2.3 smp-1.4 smp
    configuration: administrator_password=enabled boot=normal chassis=space-saving cpus=1 power-on_password=enabled uuid=44454C4C-5800-1033-8036-C4C04F56314A
  *-core
       description: Motherboard
       product: 0F8101
       vendor: Dell Inc.
       physical id: 0
       serial: ..CN6986156G08B3.
     *-firmware
          description: BIOS
          vendor: Dell Inc.
          physical id: 0
          version: A03 (08/05/2005)
          size: 64KiB
          capacity: 448KiB
          capabilities: pci pnp apm upgrade shadowing cdboot bootselect edd int13floppytoshiba int5printscreen int9keyboard int14serial int17printer acpi usb ls120boot biosbootspecification netboot
     *-cpu
          description: CPU
          product: Intel(R) Pentium(R) 4 CPU 2.80GHz
          vendor: Intel Corp.
          physical id: 400
          bus info: cpu@0
          version: 15.4.1
          serial: 0000-0F41-0000-0000-0000-0000
          slot: Microprocessor
          size: 2800MHz
          capacity: 4GHz
          width: 64 bits
          clock: 800MHz
          capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe x86-64 constant_tsc pebs bts pni monitor ds_cpl cid cx16 xtpr
          configuration: id=0
        *-cache:0
             description: L1 cache
             physical id: 700
             size: 16KiB
             capacity: 16KiB
             capabilities: internal write-back data
        *-cache:1
             description: L2 cache
             physical id: 701
             size: 1MiB
             capacity: 1MiB
             capabilities: internal varies unified
        *-logicalcpu:0
             description: Logical CPU
             physical id: 0.1
             width: 64 bits
             capabilities: logical
        *-logicalcpu:1
             description: Logical CPU
             physical id: 0.2
             width: 64 bits
             capabilities: logical
     *-memory
          description: System Memory
          physical id: 1000
          slot: System board or motherboard
          size: 2GiB
        *-bank:0
             description: DIMM DDR Synchronous 533 MHz (1.9 ns)
             product: HYMP125U64CP8-Y5
             vendor: AD00000000000000
             physical id: 0
             serial: 00002024
             slot: DIMM_1
             size: 2GiB
             width: 64 bits
             clock: 533MHz (1.9ns)
        *-bank:1
             description: DIMM DDR Synchronous 533 MHz (1.9 ns) [empty]
             vendor: FFFFFFFFFFFFFFFF
             physical id: 1
             serial: FFFFFFFF
             slot: DIMM_3
             width: 64 bits
             clock: 533MHz (1.9ns)
        *-bank:2
             description: DIMM DDR Synchronous 533 MHz (1.9 ns) [empty]
             vendor: FFFFFFFFFFFFFFFF
             physical id: 2
             serial: FFFFFFFF
             slot: DIMM_2
             width: 64 bits
             clock: 533MHz (1.9ns)
        *-bank:3
             description: DIMM DDR Synchronous 533 MHz (1.9 ns) [empty]
             vendor: FFFFFFFFFFFFFFFF
             physical id: 3
             serial: FFFFFFFF
             slot: DIMM_4
             width: 64 bits
             clock: 533MHz (1.9ns)
     *-pci
          description: Host bridge
          product: 82945G/GZ/P/PL Memory Controller Hub
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 02
          width: 32 bits
          clock: 33MHz
          configuration: driver=agpgart-intel module=intel_agp
        *-pci:0
             description: PCI bridge
             product: 82945G/GZ/P/PL PCI Express Root Port
             vendor: Intel Corporation
             physical id: 1
             bus info: pci@0000:00:01.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
        *-display:0 UNCLAIMED
             description: VGA compatible controller
             product: 82945G/GZ Integrated Graphics Controller
             vendor: Intel Corporation
             physical id: 2
             bus info: pci@0000:00:02.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: msi pm vga_controller bus_master cap_list
             configuration: latency=0
        *-display:1 UNCLAIMED
             description: Display controller
             product: 82945G/GZ Integrated Graphics Controller
             vendor: Intel Corporation
             physical id: 2.1
             bus info: pci@0000:00:02.1
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: pm bus_master cap_list
             configuration: latency=0
        *-pci:1
             description: PCI bridge
             product: 82801G (ICH7 Family) PCI Express Port 1
             vendor: Intel Corporation
             physical id: 1c
             bus info: pci@0000:00:1c.0
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
           *-network
                description: Ethernet interface
                product: NetXtreme BCM5751 Gigabit Ethernet PCI Express
                vendor: Broadcom Corporation
                physical id: 0
                bus info: pci@0000:02:00.0
                logical name: eth0
                version: 01
                serial: 00:12:3f:96:53:a3
                capacity: 1GB/s
                width: 64 bits
                clock: 33MHz
                capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.86 firmware=5751-v3.44a latency=0 link=no module=tg3 multicast=yes port=twisted pair
        *-pci:2
             description: PCI bridge
             product: 82801G (ICH7 Family) PCI Express Port 2
             vendor: Intel Corporation
             physical id: 1c.1
             bus info: pci@0000:00:1c.1
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
        *-usb:0
             description: USB Controller
             product: 82801G (ICH7 Family) USB UHCI Controller #1
             vendor: Intel Corporation
             physical id: 1d
             bus info: pci@0000:00:1d.0
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:1
             description: USB Controller
             product: 82801G (ICH7 Family) USB UHCI Controller #2
             vendor: Intel Corporation
             physical id: 1d.1
             bus info: pci@0000:00:1d.1
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:2
             description: USB Controller
             product: 82801G (ICH7 Family) USB UHCI Controller #3
             vendor: Intel Corporation
             physical id: 1d.2
             bus info: pci@0000:00:1d.2
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:3
             description: USB Controller
             product: 82801G (ICH7 Family) USB UHCI Controller #4
             vendor: Intel Corporation
             physical id: 1d.3
             bus info: pci@0000:00:1d.3
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:4
             description: USB Controller
             product: 82801G (ICH7 Family) USB2 EHCI Controller
             vendor: Intel Corporation
             physical id: 1d.7
             bus info: pci@0000:00:1d.7
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: pm debug ehci bus_master cap_list
             configuration: driver=ehci_hcd latency=0 module=ehci_hcd
        *-pci:3
             description: PCI bridge
             product: 82801 PCI Bridge
             vendor: Intel Corporation
             physical id: 1e
             bus info: pci@0000:00:1e.0
             version: e1
             width: 32 bits
             clock: 33MHz
             capabilities: pci subtractive_decode bus_master cap_list
        *-multimedia
             description: Multimedia audio controller
             product: 82801G (ICH7 Family) AC'97 Audio Controller
             vendor: Intel Corporation
             physical id: 1e.2
             bus info: pci@0000:00:1e.2
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: pm bus_master cap_list
             configuration: driver=Intel ICH latency=0 module=snd_intel8x0
        *-isa
             description: ISA bridge
             product: 82801GB/GR (ICH7 Family) LPC Interface Bridge
             vendor: Intel Corporation
             physical id: 1f
             bus info: pci@0000:00:1f.0
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master cap_list
             configuration: latency=0
        *-ide:0
             description: IDE interface
             product: 82801G (ICH7 Family) IDE Controller
             vendor: Intel Corporation
             physical id: 1f.1
             bus info: pci@0000:00:1f.1
             logical name: scsi0
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: ide bus_master emulated
             configuration: driver=ata_piix latency=0 module=ata_piix
           *-cdrom
                description: SCSI CD-ROM
                product: CD-ROM TS-L162C
                vendor: TSSTcorp
                physical id: 0.0.0
                bus info: scsi@0:0.0.0
                logical name: /dev/cdrom
                logical name: /dev/scd0
                logical name: /dev/sr0
                version: DE00
                capabilities: removable audio
                configuration: ansiversion=5 status=open
        *-ide:1
             description: IDE interface
             product: 82801GB/GR/GH (ICH7 Family) SATA IDE Controller
             vendor: Intel Corporation
             physical id: 1f.2
             bus info: pci@0000:00:1f.2
             logical name: scsi2
             version: 01
             width: 32 bits
             clock: 66MHz
             capabilities: ide pm bus_master cap_list emulated
             configuration: driver=ata_piix latency=0 module=ata_piix
           *-disk
                description: ATA Disk
                product: ST380013AS
                vendor: Seagate
                physical id: 0.0.0
                bus info: scsi@2:0.0.0
                logical name: /dev/sda
                version: 8.12
                serial: 5MR2VHBM
                size: 74GiB (80GB)
                capabilities: partitioned partitioned:dos
                configuration: ansiversion=5 signature=43a9fdfc
              *-volume:0
                   description: EXT3 volume
                   vendor: Linux
                   physical id: 1
                   bus info: scsi@2:0.0.0,1
                   logical name: /dev/sda1
                   logical name: /
                   logical name: /dev/.static/dev
                   version: 1.0
                   serial: 942a4a1d-65b8-430d-9c6a-ac4a1abb8099
                   size: 71GiB
                   capacity: 71GiB
                   capabilities: primary bootable journaled extended_attributes large_files huge_files recover ext3 ext2 initialized
                   configuration: created=2009-03-24 08:07:32 filesystem=ext3 modified=2009-08-07 15:29:32 mount.fstype=ext3 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2009-08-07 08:43:00 state=mounted
              *-volume:1
                   description: Extended partition
                   physical id: 2
                   bus info: scsi@2:0.0.0,2
                   logical name: /dev/sda2
                   size: 2933MiB
                   capacity: 2933MiB
                   capabilities: primary extended partitioned partitioned:extended
                 *-logicalvolume
                      description: Linux swap / Solaris partition
                      physical id: 5
                      logical name: /dev/sda5
                      capacity: 2933MiB
                      capabilities: nofs
        *-serial UNCLAIMED
             description: SMBus
             product: 82801G (ICH7 Family) SMBus Controller
             vendor: Intel Corporation
             physical id: 1f.3
             bus info: pci@0000:00:1f.3
             version: 01
             width: 32 bits
             clock: 33MHz
             configuration: latency=0
  *-network:0
       description: Wireless interface
       physical id: 1
       logical name: eth2
       serial: 00:14:c1:1c:09:7d
       capabilities: ethernet physical wireless
       configuration: broadcast=yes ip=192.168.1.201 multicast=yes wireless=IEEE 802.11b/g
  *-network:1 DISABLED
       description: Ethernet interface
       physical id: 2
       logical name: vboxnet0
       serial: 00:76:62:6e:65:74
       capabilities: ethernet physical
       configuration: broadcast=yes multicast=yes

I will reboot and sent the outputs before the disconnect/ connect action in 5-minutes....

Sorry, hope that with expirience, you can go through these information faster that just reading.....otherwise it is almost a "dayjob....

Jan Tijssen (tijssen-jan) said : #5

dmsg and lshw befor disconnect/ connect:
dmsg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-24-generic (buildd@rothera) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Fri Jul 24 22:46:06 UTC 2009 (Ubuntu 2.6.24-24.57-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f686c00 (usable)
[ 0.000000] BIOS-e820: 000000007f686c00 - 000000007f688c00 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f688c00 - 000000007f68ac00 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f68ac00 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 1142MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fe710
[ 0.000000] Entering add_active_range(0, 0, 521862) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 521862
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 521862
[ 0.000000] On node 0 totalpages: 521862
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2285 pages used for memmap
[ 0.000000] HighMem zone: 290201 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FEB00 checksum 0
[ 0.000000] ACPI: RSDP 000FEB00, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 000FD24F, 005C (r1 DELL GX620 6 ASL 61)
[ 0.000000] ACPI: FACP 000FD347, 00F4 (r3 DELL GX620 6 ASL 61)
[ 0.000000] ACPI: DSDT FFFD6336, 3D4F (r1 DELL dt_ex 1000 INTL 20050211)
[ 0.000000] ACPI: FACS 7F686C00, 0040
[ 0.000000] ACPI: SSDT FFFDA199, 00A4 (r1 DELL st_ex 1000 INTL 20050211)
[ 0.000000] ACPI: APIC 000FD43B, 0072 (r1 DELL GX620 6 ASL 61)
[ 0.000000] ACPI: BOOT 000FD4AD, 0028 (r1 DELL GX620 6 ASL 61)
[ 0.000000] ACPI: ASF! 000FD4D5, 0067 (r16 DELL GX620 6 ASL 61)
[ 0.000000] ACPI: MCFG 000FD53C, 003E (r1 DELL GX620 6 ASL 61)
[ 0.000000] ACPI: HPET 000FD57A, 0038 (r1 DELL GX620 6 ASL 61)
[ 0.000000] ACPI: DMI detected: Dell
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517785
[ 0.000000] Kernel command line: root=UUID=942a4a1d-65b8-430d-9c6a-ac4a1abb8099 ro
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2793.277 MHz processor.
[ 11.480623] Console: colour VGA+ 80x25
[ 11.480626] console [tty0] enabled
[ 11.483478] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 11.483904] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 11.614960] Memory: 2057252k/2087448k available (2181k kernel code, 29048k reserved, 1006k data, 368k init, 1169944k highmem)
[ 11.615030] virtual kernel memory layout:
[ 11.615031] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 11.615032] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 11.615033] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 11.615034] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 11.615035] .init : 0xc0423000 - 0xc047f000 ( 368 kB)
[ 11.615036] .data : 0xc0321538 - 0xc041cdc4 (1006 kB)
[ 11.615037] .text : 0xc0100000 - 0xc0321538 (2181 kB)
[ 11.615346] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 11.615465] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 11.615613] hpet clockevent registered
[ 11.695483] Calibrating delay using timer specific routine.. 5591.48 BogoMIPS (lpj=11182972)
[ 11.695583] Security Framework initialized
[ 11.695626] SELinux: Disabled at boot.
[ 11.695677] AppArmor: AppArmor initialized
[ 11.695718] Failure registering capabilities with primary security module.
[ 11.695768] Mount-cache hash table entries: 512
[ 11.695946] Initializing cgroup subsys ns
[ 11.695988] Initializing cgroup subsys cpuacct
[ 11.696041] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000000 00000000
[ 11.696050] monitor/mwait feature present.
[ 11.696090] using mwait in idle threads.
[ 11.696131] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 11.696194] CPU: L2 cache: 1024K
[ 11.696232] CPU: Physical Processor ID: 0
[ 11.696272] CPU: After all inits, caps: bfebfbff 20000000 00000000 00043180 0000641d 00000000 00000000 00000000
[ 11.696283] Compat vDSO mapped to ffffe000.
[ 11.696336] Checking 'hlt' instruction... OK.
[ 11.711973] SMP alternatives: switching to UP code
[ 11.714050] Early unpacking initramfs... done
[ 12.044126] ACPI: Core revision 20070126
[ 12.101322] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 12.187993] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
[ 12.188099] SMP alternatives: switching to SMP code
[ 12.188954] Booting processor 1/1 eip 3000
[ 12.199095] Initializing CPU#1
[ 12.278484] Calibrating delay using timer specific routine.. 5585.98 BogoMIPS (lpj=11171967)
[ 12.278497] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000000 00000000
[ 12.278505] monitor/mwait feature present.
[ 12.278511] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 12.278514] CPU: L2 cache: 1024K
[ 12.278516] CPU: Physical Processor ID: 0
[ 12.278520] CPU: After all inits, caps: bfebfbff 20000000 00000000 00043180 0000641d 00000000 00000000 00000000
[ 12.278910] CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
[ 12.279277] Total of 2 processors activated (11177.46 BogoMIPS).
[ 12.279470] ENABLING IO-APIC IRQs
[ 12.279688] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 12.426379] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 12.446427] Brought up 2 CPUs
[ 12.446493] CPU0 attaching sched-domain:
[ 12.446497] domain 0: span 03
[ 12.446499] groups: 01 02
[ 12.446504] domain 1: span 03
[ 12.446506] groups: 03
[ 12.446509] CPU1 attaching sched-domain:
[ 12.446510] domain 0: span 03
[ 12.446513] groups: 02 01
[ 12.446516] domain 1: span 03
[ 12.446518] groups: 03
[ 12.446813] net_namespace: 64 bytes
[ 12.446866] Booting paravirtualized kernel on bare hardware
[ 12.447553] Time: 19:14:44 Date: 08/07/09
[ 12.447617] NET: Registered protocol family 16
[ 12.447944] EISA bus registered
[ 12.447987] ACPI: bus type pci registered
[ 12.473247] PCI: PCI BIOS revision 2.10 entry at 0xfb894, last bus=4
[ 12.473288] PCI: Using configuration type 1
[ 12.473349] Setting up standard PCI resources
[ 12.482551] ACPI: EC: Look up EC in DSDT
[ 12.514983] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 12.515026] ACPI: If "acpi_osi=Linux" works better, please notify <email address hidden>
[ 12.526322] ACPI: Interpreter enabled
[ 12.526362] ACPI: (supports S0 S1 S3 S4 S5)
[ 12.526529] ACPI: Using IOAPIC for interrupt routing
[ 12.593991] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 12.594779] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 12.594824] PCI quirk: region 0880-08bf claimed by ICH6 GPIO
[ 12.595489] PCI: Transparent bridge - 0000:00:1e.0
[ 12.595565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 12.596314] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 12.596920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 12.597213] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
[ 12.597510] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 13.334001] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 13.334754] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 13.335471] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 13.336218] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 13.337017] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 13.337747] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 13.338512] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 13.339224] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 13.339861] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 13.339946] pnp: PnP ACPI init
[ 13.339990] ACPI: bus type pnp registered
[ 13.374984] pnpacpi: exceeded the max number of IO resources: 40
[ 13.375109] pnp: PnP ACPI: found 10 devices
[ 13.375148] ACPI: ACPI bus type pnp unregistered
[ 13.375192] PnPBIOS: Disabled by ACPI PNP
[ 13.375557] PCI: Using ACPI for IRQ routing
[ 13.375598] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 13.400551] NET: Registered protocol family 8
[ 13.400590] NET: Registered protocol family 20
[ 13.400671] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 13.400805] hpet0: 3 64-bit timers, 14318180 Hz
[ 13.401886] AppArmor: AppArmor Filesystem Enabled
[ 13.404534] Time: tsc clocksource has been installed.
[ 13.404587] Switched to high resolution mode on CPU 0
[ 13.404753] Switched to high resolution mode on CPU 1
[ 13.416478] system 00:01: ioport range 0x800-0x85f has been reserved
[ 13.416522] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 13.416563] system 00:01: ioport range 0x860-0x8ff could not be reserved
[ 13.416616] system 00:08: iomem range 0x0-0x9ffff could not be reserved
[ 13.416658] system 00:08: iomem range 0x100000-0xffffff could not be reserved
[ 13.416702] system 00:08: iomem range 0x1000000-0x7f686bff could not be reserved
[ 13.416754] system 00:08: iomem range 0xf0000-0xfffff could not be reserved
[ 13.416797] system 00:08: iomem range 0xc0000-0xcffff could not be reserved
[ 13.416840] system 00:08: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 13.416892] system 00:08: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 13.416944] system 00:08: iomem range 0xfed20000-0xfed9ffff could not be reserved
[ 13.416996] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 13.417047] system 00:08: iomem range 0xffc00000-0xffffffff could not be reserved
[ 13.417104] system 00:09: ioport range 0x100-0x1fe could not be reserved
[ 13.417146] system 00:09: ioport range 0x200-0x277 has been reserved
[ 13.417188] system 00:09: ioport range 0x280-0x2e7 has been reserved
[ 13.417228] system 00:09: ioport range 0x2f0-0x2f7 has been reserved
[ 13.417269] system 00:09: ioport range 0x300-0x377 could not be reserved
[ 13.417975] system 00:09: ioport range 0x380-0x3bb has been reserved
[ 13.418018] system 00:09: ioport range 0x3c0-0x3e7 could not be reserved
[ 13.418059] system 00:09: ioport range 0x3f6-0x3f7 could not be reserved
[ 13.418101] system 00:09: ioport range 0x400-0x4cf has been reserved
[ 13.418143] system 00:09: ioport range 0x4d2-0x57f has been reserved
[ 13.418184] system 00:09: ioport range 0x580-0x677 has been reserved
[ 13.418226] system 00:09: ioport range 0x680-0x777 has been reserved
[ 13.418267] system 00:09: ioport range 0x780-0x7bb has been reserved
[ 13.418308] system 00:09: ioport range 0x7c0-0x7ff has been reserved
[ 13.418349] system 00:09: ioport range 0x8e0-0x8ff has been reserved
[ 13.418391] system 00:09: ioport range 0x900-0x9fe has been reserved
[ 13.418432] system 00:09: ioport range 0xa00-0xafe has been reserved
[ 13.418473] system 00:09: ioport range 0xb00-0xbfe has been reserved
[ 13.418515] system 00:09: ioport range 0xc80-0xcaf has been reserved
[ 13.418557] system 00:09: ioport range 0xcb0-0xcbf has been reserved
[ 13.418599] system 00:09: ioport range 0xcc0-0xcf7 has been reserved
[ 13.418641] system 00:09: ioport range 0xd00-0xdfe has been reserved
[ 13.418683] system 00:09: ioport range 0xe00-0xefe has been reserved
[ 13.418724] system 00:09: ioport range 0xf00-0xffe has been reserved
[ 13.418766] system 00:09: ioport range 0x2000-0x20fe has been reserved
[ 13.418808] system 00:09: ioport range 0x2100-0x21fe has been reserved
[ 13.418849] system 00:09: ioport range 0x2200-0x22fe has been reserved
[ 13.418890] system 00:09: ioport range 0x2300-0x23fe has been reserved
[ 13.418933] system 00:09: ioport range 0x2400-0x24fe has been reserved
[ 13.418973] system 00:09: ioport range 0x2500-0x25fe has been reserved
[ 13.419014] system 00:09: ioport range 0x2600-0x26fe has been reserved
[ 13.419057] system 00:09: ioport range 0x2700-0x27fe has been reserved
[ 13.419097] system 00:09: ioport range 0x2800-0x28fe has been reserved
[ 13.419138] system 00:09: ioport range 0x2900-0x29fe has been reserved
[ 13.419181] system 00:09: ioport range 0x2a00-0x2afe has been reserved
[ 13.419223] system 00:09: ioport range 0x2b00-0x2bfe has been reserved
[ 13.419264] system 00:09: ioport range 0x2c00-0x2cfe has been reserved
[ 13.419306] system 00:09: ioport range 0x2d00-0x2dfe has been reserved
[ 13.419349] system 00:09: ioport range 0x2e00-0x2efe has been reserved
[ 13.419390] system 00:09: ioport range 0x2f00-0x2ffe has been reserved
[ 13.419432] system 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 13.419485] system 00:09: iomem range 0xfeda0000-0xfedacfff has been reserved
[ 13.450085] PCI: Bridge: 0000:00:01.0
[ 13.450123] IO window: disabled.
[ 13.450163] MEM window: fe900000-fe9fffff
[ 13.450202] PREFETCH window: disabled.
[ 13.450242] PCI: Bridge: 0000:00:1c.0
[ 13.450279] IO window: disabled.
[ 13.450319] MEM window: fe800000-fe8fffff
[ 13.450358] PREFETCH window: disabled.
[ 13.450399] PCI: Bridge: 0000:00:1c.1
[ 13.450437] IO window: disabled.
[ 13.450477] MEM window: fe700000-fe7fffff
[ 13.450516] PREFETCH window: disabled.
[ 13.450557] PCI: Bridge: 0000:00:1e.0
[ 13.450595] IO window: disabled.
[ 13.450634] MEM window: disabled.
[ 13.450673] PREFETCH window: disabled.
[ 13.450732] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 13.450811] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 13.450831] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 13.450908] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 13.450929] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 13.451007] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 13.451018] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 13.451030] NET: Registered protocol family 2
[ 13.488380] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 13.488766] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 13.489478] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 13.489842] TCP: Hash tables configured (established 131072 bind 65536)
[ 13.489883] TCP reno registered
[ 13.500462] checking if image is initramfs... it is
[ 14.149664] Freeing initrd memory: 7719k freed
[ 14.149882] Simple Boot Flag at 0x7a set to 0x1
[ 14.150476] audit: initializing netlink socket (disabled)
[ 14.150527] audit(1249672485.412:1): initialized
[ 14.150831] highmem bounce pool size: 64 pages
[ 14.153563] VFS: Disk quotas dquot_6.5.1
[ 14.153704] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 14.153918] io scheduler noop registered
[ 14.153958] io scheduler anticipatory registered
[ 14.153996] io scheduler deadline registered
[ 14.154044] io scheduler cfq registered (default)
[ 14.154097] Boot video device is 0000:00:02.0
[ 14.154309] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 14.154354] assign_interrupt_mode Found MSI capability
[ 14.154429] Allocate Port Service[0000:00:01.0:pcie00]
[ 14.154531] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 14.154577] assign_interrupt_mode Found MSI capability
[ 14.154652] Allocate Port Service[0000:00:1c.0:pcie00]
[ 14.154701] Allocate Port Service[0000:00:1c.0:pcie02]
[ 14.154804] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 14.154851] assign_interrupt_mode Found MSI capability
[ 14.154925] Allocate Port Service[0000:00:1c.1:pcie00]
[ 14.154974] Allocate Port Service[0000:00:1c.1:pcie02]
[ 14.155313] isapnp: Scanning for PnP cards...
[ 14.506477] isapnp: No Plug & Play device found
[ 14.546216] Real Time Clock Driver v1.12ac
[ 14.546383] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 14.546575] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 14.547462] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 14.548564] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 14.548707] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 14.548960] PNP: No PS/2 controller found. Probing ports directly.
[ 14.551574] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 14.551622] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 14.574609] mice: PS/2 mouse device common for all mice
[ 14.574820] EISA: Probing bus 0 at eisa.0
[ 14.574862] EISA: Cannot allocate resource for mainboard
[ 14.574907] Cannot allocate resource for EISA slot 2
[ 14.574968] EISA: Detected 0 cards.
[ 14.575006] cpuidle: using governor ladder
[ 14.575045] cpuidle: using governor menu
[ 14.575169] NET: Registered protocol family 1
[ 14.575242] Using IPI No-Shortcut mode
[ 14.575308] registered taskstats version 1
[ 14.575452] Magic number: 5:720:242
[ 14.575524] hash matches device ttysf
[ 14.575637] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 14.575678] EDD information not available.
[ 14.575946] Freeing unused kernel memory: 368k freed
[ 14.576010] Write protecting the kernel read-only data: 802k
[ 14.814751] fuse init (API version 7.9)
[ 14.838241] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 14.838359] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 15.045858] tg3.c:v3.86 (November 9, 2007)
[ 15.045928] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 15.046016] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 15.067628] eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:12:3f:96:53:a3
[ 15.067846] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 15.067900] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 15.092410] usbcore: registered new interface driver usbfs
[ 15.092504] usbcore: registered new interface driver hub
[ 15.093161] usbcore: registered new device driver usb
[ 15.095202] USB Universal Host Controller Interface driver v3.0
[ 15.095320] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 18
[ 15.095414] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 15.095420] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 15.095706] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 15.095802] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000ff80
[ 15.096060] usb usb1: configuration #1 chosen from 1 choice
[ 15.096143] hub 1-0:1.0: USB hub found
[ 15.096189] hub 1-0:1.0: 2 ports detected
[ 15.201600] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 19
[ 15.201698] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 15.201704] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 15.201780] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 15.201867] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
[ 15.202092] usb usb2: configuration #1 chosen from 1 choice
[ 15.202174] hub 2-0:1.0: USB hub found
[ 15.202220] hub 2-0:1.0: 2 ports detected
[ 15.305425] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 15.305527] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 15.305533] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 15.305609] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 15.305693] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000ff40
[ 15.305924] usb usb3: configuration #1 chosen from 1 choice
[ 15.306004] hub 3-0:1.0: USB hub found
[ 15.306051] hub 3-0:1.0: 2 ports detected
[ 15.379902] SCSI subsystem initialized
[ 15.409255] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 21
[ 15.409357] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 15.409363] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 15.409447] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 15.409535] uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000ff20
[ 15.409759] usb usb4: configuration #1 chosen from 1 choice
[ 15.409843] hub 4-0:1.0: USB hub found
[ 15.409891] hub 4-0:1.0: 2 ports detected
[ 15.446103] libata version 3.00 loaded.
[ 15.513294] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 18
[ 15.513396] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 15.513402] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 15.513493] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 15.518140] ehci_hcd 0000:00:1d.7: debug port 1
[ 15.518188] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 15.518198] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xffa80800
[ 15.544904] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 15.556866] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 15.557074] usb usb5: configuration #1 chosen from 1 choice
[ 15.557146] hub 5-0:1.0: USB hub found
[ 15.557191] hub 5-0:1.0: 8 ports detected
[ 15.660831] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 15.660976] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 15.660997] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 15.661079] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 22
[ 15.661201] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 15.661216] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 15.667147] ata_piix 0000:00:1f.1: version 2.12
[ 15.667174] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 15.667311] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 15.667640] scsi0 : ata_piix
[ 15.667766] scsi1 : ata_piix
[ 15.672560] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 15.672611] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 16.077326] ata1.00: ATAPI: TSSTcorpCD-ROM TS-L162C, DE00, max UDMA/33
[ 16.336829] ata1.00: configured for UDMA/33
[ 16.336919] ata2: port disabled. ignoring.
[ 16.354305] scsi 0:0:0:0: CD-ROM TSSTcorp CD-ROM TS-L162C DE00 PQ: 0 ANSI: 5
[ 16.354459] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 16.471328] usb 5-4: new high speed USB device using ehci_hcd and address 3
[ 16.507277] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 22
[ 16.507396] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 16.507454] scsi2 : ata_piix
[ 16.507730] scsi3 : ata_piix
[ 16.507814] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 22
[ 16.507862] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 22
[ 16.671333] ata3.00: ATA-6: ST380013AS, 8.12, max UDMA/133
[ 16.671379] ata3.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 16.688313] ata3.00: configured for UDMA/133
[ 16.781412] usb 5-4: configuration #1 chosen from 1 choice
[ 17.206086] usb 5-8: new high speed USB device using ehci_hcd and address 5
[ 17.338843] usb 5-8: configuration #1 chosen from 1 choice
[ 17.513755] scsi 2:0:0:0: Direct-Access ATA ST380013AS 8.12 PQ: 0 ANSI: 5
[ 17.526682] Driver 'sd' needs updating - please use bus_type methods
[ 17.526870] sd 2:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
[ 17.526944] sd 2:0:0:0: [sda] Write Protect is off
[ 17.526995] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 17.527031] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.527163] sd 2:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB)
[ 17.527223] sd 2:0:0:0: [sda] Write Protect is off
[ 17.527266] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 17.527296] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.527355] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 17.538273] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 17.538320] Uniform CD-ROM driver Revision: 3.20
[ 17.538429] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 17.577466] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 17.601729] sda1 sda2 < sda5 >
[ 17.621774] sd 2:0:0:0: [sda] Attached SCSI disk
[ 17.630667] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 17.630753] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 17.866592] usb 2-1: configuration #1 chosen from 1 choice
[ 18.006019] Attempting manual resume
[ 18.006059] swsusp: Resume From Partition 8:5
[ 18.006061] PM: Checking swsusp image.
[ 18.006231] PM: Resume from disk failed.
[ 18.031886] kjournald starting. Commit interval 5 seconds
[ 18.031902] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.108572] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 18.285836] usb 3-2: configuration #1 chosen from 1 choice
[ 27.974613] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 28.012868] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 29.078186] Linux agpgart interface v0.102
[ 29.187111] agpgart: Detected an Intel 945G Chipset.
[ 29.187913] agpgart: Detected 7932K stolen memory.
[ 29.202880] agpgart: AGP aperture is 256M @ 0xe0000000
[ 29.277890] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 29.321019] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 29.863824] input: Power Button (FF) as /devices/virtual/input/input1
[ 29.885817] ACPI: Power Button (FF) [PWRF]
[ 29.885981] input: Power Button (CM) as /devices/virtual/input/input2
[ 29.905758] ACPI: Power Button (CM) [VBTN]
[ 30.253475] intel_rng: Firmware space is locked read-only. If you can't or
[ 30.253481] intel_rng: don't want to disable this in firmware setup, and if
[ 30.253484] intel_rng: you are certain that your system has a functional
[ 30.253486] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 30.452049] iTCO_vendor_support: vendor-support=0
[ 30.472856] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 30.473040] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 30.473108] iTCO_wdt: No card detected
[ 31.226584] Linux video capture interface: v2.00
[ 31.482222] usbcore: registered new interface driver hiddev
[ 31.496704] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0/input/input3
[ 31.518103] input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2
[ 31.521420] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 23 (level, low) -> IRQ 21
[ 31.521532] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 31.549013] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.1/input/input4
[ 31.582016] input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2
[ 31.582202] usbcore: registered new interface driver usbhid
[ 31.582248] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 31.590648] pwc: Philips webcam module version 10.0.13 loaded.
[ 31.590701] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
[ 31.590760] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
[ 31.590818] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
[ 31.590923] pwc: Logitech QuickCam Zoom (new model) USB webcam detected.
[ 31.591011] pwc: Registered as /dev/video0.
[ 31.593171] usbcore: registered new interface driver Philips webcam
[ 31.626048] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 31.686818] ieee80211_crypt: registered algorithm 'NULL'
[ 31.706771] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 31.706833] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 31.856685] parport_pc 00:06: reported by Plug and Play ACPI
[ 31.856807] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 31.868609] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 31.941331] intel8x0_measure_ac97_clock: measured 54825 usecs
[ 31.941393] intel8x0: clocking to 48000
[ 31.986263] usb 5-8: reset high speed USB device using ehci_hcd and address 5
[ 32.121860] zd1211rw 5-8:1.0: eth1
[ 32.122034] usbcore: registered new interface driver zd1211rw
[ 32.168699] usbcore: registered new interface driver snd-usb-audio
[ 33.141974] udev: renamed network interface eth1 to eth2
[ 33.308977] zd1211rw 5-8:1.0: firmware version 4725
[ 33.348907] zd1211rw 5-8:1.0: zd1211b chip 0baf:0121 v4810 high 00-14-c1 AL2230_RF pa0 g--N-
[ 33.440388] ieee80211_crypt: registered algorithm 'WEP'
[ 33.451926] lp0: using parport0 (interrupt-driven).
[ 33.544107] Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1 across:3004112k
[ 33.935155] SoftMAC: Open Authentication completed with 00:1e:e5:84:ea:a9
[ 34.028329] EXT3 FS on sda1, internal journal
[ 34.387515] device-mapper: uevent: version 1.0.3
[ 34.387562] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: <email address hidden>
[ 37.676946] NET: Registered protocol family 10
[ 37.677552] lo: Disabled Privacy Extensions
[ 45.922847] No dock devices found.
[ 45.924965] ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: found ejectable bay
[ 45.924974] ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: Adding notify handler
[ 45.925026] ACPI: Error installing bay notify handler
[ 45.925030] ACPI: Bay [\_SB_.PCI0.IDE1.PRI1.MAS1] Added
[ 47.810954] eth2: no IPv6 routers present
[ 49.534057] audit(1249672521.748:2): type=1503 operation="capable" name="sys_resource" pid=7534 profile="/usr/sbin/named" namespace="default"
[ 56.845264] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 56.845274] apm: disabled - APM is not SMP safe.
[ 57.480691] ppdev: user-space parallel port driver
[ 57.818055] audit(1249672530.044:3): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=8068 profile="/usr/sbin/cupsd" namespace="default"
[ 59.080944] RPC: Registered udp transport module.
[ 59.080954] RPC: Registered tcp transport module.
[ 59.164454] Installing knfsd (copyright (C) 1996 <email address hidden>).
[ 59.284578] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 59.302178] NFSD: starting 90-second grace period
[ 63.227003] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 63.227012] vboxdrv: Successfully done.
[ 63.227015] vboxdrv: Found 2 processor cores.
[ 63.228185] vboxdrv: fAsync=0 offMin=0x4ad offMax=0x2a46
[ 63.228617] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 63.228625] vboxdrv: Successfully loaded version 2.2.4 (interface 0x000a0009).
[ 65.018235] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 65.058604] Bluetooth: Core ver 2.11
[ 65.059111] NET: Registered protocol family 31
[ 65.059117] Bluetooth: HCI device and connection manager initialized
[ 65.059126] Bluetooth: HCI socket layer initialized
[ 65.077602] Bluetooth: L2CAP ver 2.9
[ 65.077610] Bluetooth: L2CAP socket layer initialized
[ 65.125808] Bluetooth: RFCOMM socket layer initialized
[ 65.125829] Bluetooth: RFCOMM TTY layer initialized
[ 65.125833] Bluetooth: RFCOMM ver 1.8
[ 66.723355] [drm] Initialized drm 1.1.0 20060810
[ 66.727188] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 66.727202] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 66.727292] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 118.513644] process `skype' is using obsolete setsockopt SO_BSDCOMPAT

lshw:

01-desktop
    description: Space-saving Computer
    product: OptiPlex GX620
    vendor: Dell Inc.
    serial: DX36V1J
    width: 32 bits
    capabilities: smbios-2.3 dmi-2.3 smp-1.4 smp
    configuration: administrator_password=enabled boot=normal chassis=space-saving cpus=1 power-on_password=enabled uuid=44454C4C-5800-1033-8036-C4C04F56314A
  *-core
       description: Motherboard
       product: 0F8101
       vendor: Dell Inc.
       physical id: 0
       serial: ..CN6986156G08B3.
     *-firmware
          description: BIOS
          vendor: Dell Inc.
          physical id: 0
          version: A03 (08/05/2005)
          size: 64KiB
          capacity: 448KiB
          capabilities: pci pnp apm upgrade shadowing cdboot bootselect edd int13floppytoshiba int5printscreen int9keyboard int14serial int17printer acpi usb ls120boot biosbootspecification netboot
     *-cpu
          description: CPU
          product: Intel(R) Pentium(R) 4 CPU 2.80GHz
          vendor: Intel Corp.
          physical id: 400
          bus info: cpu@0
          version: 15.4.1
          serial: 0000-0F41-0000-0000-0000-0000
          slot: Microprocessor
          size: 2800MHz
          capacity: 4GHz
          width: 64 bits
          clock: 800MHz
          capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe x86-64 constant_tsc pebs bts pni monitor ds_cpl cid cx16 xtpr
          configuration: id=1
        *-cache:0
             description: L1 cache
             physical id: 700
             size: 16KiB
             capacity: 16KiB
             capabilities: internal write-back data
        *-cache:1
             description: L2 cache
             physical id: 701
             size: 1MiB
             capacity: 1MiB
             capabilities: internal varies unified
        *-logicalcpu:0
             description: Logical CPU
             physical id: 1.1
             width: 64 bits
             capabilities: logical
        *-logicalcpu:1
             description: Logical CPU
             physical id: 1.2
             width: 64 bits
             capabilities: logical
     *-memory
          description: System Memory
          physical id: 1000
          slot: System board or motherboard
          size: 2GiB
        *-bank:0
             description: DIMM DDR Synchronous 533 MHz (1.9 ns)
             product: HYMP125U64CP8-Y5
             vendor: AD00000000000000
             physical id: 0
             serial: 00002024
             slot: DIMM_1
             size: 2GiB
             width: 64 bits
             clock: 533MHz (1.9ns)
        *-bank:1
             description: DIMM DDR Synchronous 533 MHz (1.9 ns) [empty]
             vendor: FFFFFFFFFFFFFFFF
             physical id: 1
             serial: FFFFFFFF
             slot: DIMM_3
             width: 64 bits
             clock: 533MHz (1.9ns)
        *-bank:2
             description: DIMM DDR Synchronous 533 MHz (1.9 ns) [empty]
             vendor: FFFFFFFFFFFFFFFF
             physical id: 2
             serial: FFFFFFFF
             slot: DIMM_2
             width: 64 bits
             clock: 533MHz (1.9ns)
        *-bank:3
             description: DIMM DDR Synchronous 533 MHz (1.9 ns) [empty]
             vendor: FFFFFFFFFFFFFFFF
             physical id: 3
             serial: FFFFFFFF
             slot: DIMM_4
             width: 64 bits
             clock: 533MHz (1.9ns)
     *-pci
          description: Host bridge
          product: 82945G/GZ/P/PL Memory Controller Hub
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 02
          width: 32 bits
          clock: 33MHz
          configuration: driver=agpgart-intel module=intel_agp
        *-pci:0
             description: PCI bridge
             product: 82945G/GZ/P/PL PCI Express Root Port
             vendor: Intel Corporation
             physical id: 1
             bus info: pci@0000:00:01.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
        *-display:0 UNCLAIMED
             description: VGA compatible controller
             product: 82945G/GZ Integrated Graphics Controller
             vendor: Intel Corporation
             physical id: 2
             bus info: pci@0000:00:02.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: msi pm vga_controller bus_master cap_list
             configuration: latency=0
        *-display:1 UNCLAIMED
             description: Display controller
             product: 82945G/GZ Integrated Graphics Controller
             vendor: Intel Corporation
             physical id: 2.1
             bus info: pci@0000:00:02.1
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: pm bus_master cap_list
             configuration: latency=0
        *-pci:1
             description: PCI bridge
             product: 82801G (ICH7 Family) PCI Express Port 1
             vendor: Intel Corporation
             physical id: 1c
             bus info: pci@0000:00:1c.0
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
           *-network
                description: Ethernet interface
                product: NetXtreme BCM5751 Gigabit Ethernet PCI Express
                vendor: Broadcom Corporation
                physical id: 0
                bus info: pci@0000:02:00.0
                logical name: eth0
                version: 01
                serial: 00:12:3f:96:53:a3
                capacity: 1GB/s
                width: 64 bits
                clock: 33MHz
                capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.86 firmware=5751-v3.44a latency=0 link=no module=tg3 multicast=yes port=twisted pair
        *-pci:2
             description: PCI bridge
             product: 82801G (ICH7 Family) PCI Express Port 2
             vendor: Intel Corporation
             physical id: 1c.1
             bus info: pci@0000:00:1c.1
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
        *-usb:0
             description: USB Controller
             product: 82801G (ICH7 Family) USB UHCI Controller #1
             vendor: Intel Corporation
             physical id: 1d
             bus info: pci@0000:00:1d.0
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:1
             description: USB Controller
             product: 82801G (ICH7 Family) USB UHCI Controller #2
             vendor: Intel Corporation
             physical id: 1d.1
             bus info: pci@0000:00:1d.1
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:2
             description: USB Controller
             product: 82801G (ICH7 Family) USB UHCI Controller #3
             vendor: Intel Corporation
             physical id: 1d.2
             bus info: pci@0000:00:1d.2
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:3
             description: USB Controller
             product: 82801G (ICH7 Family) USB UHCI Controller #4
             vendor: Intel Corporation
             physical id: 1d.3
             bus info: pci@0000:00:1d.3
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-usb:4
             description: USB Controller
             product: 82801G (ICH7 Family) USB2 EHCI Controller
             vendor: Intel Corporation
             physical id: 1d.7
             bus info: pci@0000:00:1d.7
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: pm debug ehci bus_master cap_list
             configuration: driver=ehci_hcd latency=0 module=ehci_hcd
        *-pci:3
             description: PCI bridge
             product: 82801 PCI Bridge
             vendor: Intel Corporation
             physical id: 1e
             bus info: pci@0000:00:1e.0
             version: e1
             width: 32 bits
             clock: 33MHz
             capabilities: pci subtractive_decode bus_master cap_list
        *-multimedia
             description: Multimedia audio controller
             product: 82801G (ICH7 Family) AC'97 Audio Controller
             vendor: Intel Corporation
             physical id: 1e.2
             bus info: pci@0000:00:1e.2
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: pm bus_master cap_list
             configuration: driver=Intel ICH latency=0 module=snd_intel8x0
        *-isa
             description: ISA bridge
             product: 82801GB/GR (ICH7 Family) LPC Interface Bridge
             vendor: Intel Corporation
             physical id: 1f
             bus info: pci@0000:00:1f.0
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master cap_list
             configuration: latency=0
        *-ide:0
             description: IDE interface
             product: 82801G (ICH7 Family) IDE Controller
             vendor: Intel Corporation
             physical id: 1f.1
             bus info: pci@0000:00:1f.1
             logical name: scsi0
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: ide bus_master emulated
             configuration: driver=ata_piix latency=0 module=ata_piix
           *-cdrom
                description: SCSI CD-ROM
                product: CD-ROM TS-L162C
                vendor: TSSTcorp
                physical id: 0.0.0
                bus info: scsi@0:0.0.0
                logical name: /dev/cdrom
                logical name: /dev/scd0
                logical name: /dev/sr0
                version: DE00
                capabilities: removable audio
                configuration: ansiversion=5 status=open
        *-ide:1
             description: IDE interface
             product: 82801GB/GR/GH (ICH7 Family) SATA IDE Controller
             vendor: Intel Corporation
             physical id: 1f.2
             bus info: pci@0000:00:1f.2
             logical name: scsi2
             version: 01
             width: 32 bits
             clock: 66MHz
             capabilities: ide pm bus_master cap_list emulated
             configuration: driver=ata_piix latency=0 module=ata_piix
           *-disk
                description: ATA Disk
                product: ST380013AS
                vendor: Seagate
                physical id: 0.0.0
                bus info: scsi@2:0.0.0
                logical name: /dev/sda
                version: 8.12
                serial: 5MR2VHBM
                size: 74GiB (80GB)
                capabilities: partitioned partitioned:dos
                configuration: ansiversion=5 signature=43a9fdfc
              *-volume:0
                   description: EXT3 volume
                   vendor: Linux
                   physical id: 1
                   bus info: scsi@2:0.0.0,1
                   logical name: /dev/sda1
                   logical name: /
                   logical name: /dev/.static/dev
                   version: 1.0
                   serial: 942a4a1d-65b8-430d-9c6a-ac4a1abb8099
                   size: 71GiB
                   capacity: 71GiB
                   capabilities: primary bootable journaled extended_attributes large_files huge_files recover ext3 ext2 initialized
                   configuration: created=2009-03-24 08:07:32 filesystem=ext3 modified=2009-08-07 21:14:30 mount.fstype=ext3 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2009-08-07 20:10:02 state=mounted
              *-volume:1
                   description: Extended partition
                   physical id: 2
                   bus info: scsi@2:0.0.0,2
                   logical name: /dev/sda2
                   size: 2933MiB
                   capacity: 2933MiB
                   capabilities: primary extended partitioned partitioned:extended
                 *-logicalvolume
                      description: Linux swap / Solaris partition
                      physical id: 5
                      logical name: /dev/sda5
                      capacity: 2933MiB
                      capabilities: nofs
        *-serial UNCLAIMED
             description: SMBus
             product: 82801G (ICH7 Family) SMBus Controller
             vendor: Intel Corporation
             physical id: 1f.3
             bus info: pci@0000:00:1f.3
             version: 01
             width: 32 bits
             clock: 33MHz
             configuration: latency=0
  *-network:0
       description: Wireless interface
       physical id: 1
       logical name: eth2
       serial: 00:14:c1:1c:09:7d
       capabilities: ethernet physical wireless
       configuration: broadcast=yes ip=192.168.1.201 multicast=yes wireless=IEEE 802.11b/g
  *-network:1 DISABLED
       description: Ethernet interface
       physical id: 2
       logical name: vboxnet0
       serial: 00:76:62:6e:65:74
       capabilities: ethernet physical
       configuration: broadcast=yes multicast=yes

Really hope this is not to much and you can solve my problem.

Again, cheese did something with my settings as before my web-cam worked like a charm.

kind regards,

Jan

try rebooting so the camera doesnt work then run:

sudo rmmod uhci_hcd; sleep 5; sudo modprobe uhci_hcd

Jan Tijssen (tijssen-jan) said : #7

This has effects:

After this "Cheese" works, but Camorama does not (Could not connect to video device (/dev/video0)
Skype does not work neither. However, is show the test button but gives /dev/video2 as video device.
I can press the "test" button, but no test picture.

So, yes, progress but no definite solution yet.

In the mean time, I really appreciate your help!!!

Jan

Jan Tijssen (tijssen-jan) said : #8

Please read video1 in stead of video2

Jan Tijssen (tijssen-jan) said : #9

I have found out the following, relevancy unknown, sorry.... :-(

When command as mentioned 'sudo rmmod uhci_hcd; sleep 5; sudo modprobe uhci_hcd' I can not get the WEB-cam working witch disconnect/ connecting the webcam as before this command.
After a reboot, old situation (see initial question) is valid.

regards,

Jan

(spent some time today, but stil not able to solve this (looking small......) problem which apparently it is not)

Jan Tijssen (tijssen-jan) said : #10

Today I tried to get the Web-Cam going, no success.
However, maybe somebody can help me with the following:

How can I monitor or find out what is happening at the moment when I am disconnecting and reconnecting the WEB-cam......and is starts working?

Jan Tijssen (tijssen-jan) said : #11

Eureka!

Found the solution. I removed the package "Motion".....
Can't remember when I installed is, but I am sure this was around the time the WEB stopped to work spontaneously from boot.

Some how, this package takes the WEB-CAM so no other application can get a hold on it.

Next step is off-course to see how Motion exactly works...

Actionparsnip, although I did not hear from you this week, nevertheless thank you for the support.

Jan