b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 8, Type 4, Revision 4) -> Wireless Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) not working on MacBook Pro 5,5 (mid 2009 model) using Ubuntu 10.10
I'm not really good with technical stuff, but I can't get my wireless to work on Ubuntu 10.10 on a mid 2009 macbook pro dual boot.
Question information
- Language:
- English Edit question
- Status:
- Solved
- For:
- Ubuntu bcmwl Edit question
- Assignee:
- No assignee Edit question
- Solved by:
- Mark Rijckenberg
- Solved:
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
Hi,
Please first connect your network card to the wireless router using an ethernet cable (also known as a LAN cable).
In order to gather essential troubleshooting information about your wireless card, please follow this procedure:
Step 1: Open Terminal from "Applications-
Step 2: Please copy-paste the following command from the https:/
Tip: If you have a wheel mouse or 3 button mouse you do not need to type commands into the Terminal. Highlight the command written on the page. Move your cursor anywhere in the Terminal and press the wheel or middle button. Automatic Copy and paste! No spelling mistakes! No Typos! No other errors!
sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/
Step 3: Please post results (copy/paste terminal output) on this thread. The troubleshooters here need to see the full Terminal output from running the above command.
Regards,
Mark
|
Revision history for this message
|
#2 |
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Fetched 2,697B in 1s (2,658B/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
The following packages were automatically installed and are no longer required:
fakeroot dkms patch
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
libhal1 libhd16
The following NEW packages will be installed:
hwinfo libhal1 libhd16
0 upgraded, 3 newly installed, 0 to remove and 233 not upgraded.
Need to get 849kB of archives.
After this operation, 2,286kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://
Get:2 http://
Get:3 http://
Fetched 849kB in 1s (550kB/s)
Selecting previously deselected package libhal1.
(Reading database ... 118657 files and directories currently installed.)
Unpacking libhal1 (from .../libhal1_
Selecting previously deselected package libhd16.
Unpacking libhd16 (from .../libhd16_
Selecting previously deselected package hwinfo.
Unpacking hwinfo (from .../hwinfo_
Processing triggers for man-db ...
Setting up libhal1 (0.5.14-0ubuntu6) ...
Setting up libhd16 (16.0-2) ...
Setting up hwinfo (16.0-2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
*-network
description: Ethernet interface
product: MCP79 Ethernet
vendor: nVidia Corporation
physical id: a
bus info: pci@0000:00:0a.0
logical name: eth0
version: b1
serial: 64:b9:e8:ba:1a:48
size: 100MB/s
capacity: 1GB/s
width: 32 bits
clock: 66MHz
resources: irq:43 memory:
*-network
description: Network controller
product: BCM4322 802.11a/b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:03:00.0
version: 01
width: 64 bits
clock: 33MHz
resources: irq:23 memory:
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 Host bridge [0600]: nVidia Corporation MCP79 Host Bridge [10de:0a82] (rev b1)
00:00.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0a88] (rev b1)
00:03.0 ISA bridge [0601]: nVidia Corporation MCP79 LPC Bridge [10de:0aae] (rev b3)
00:03.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0aa4] (rev b1)
00:03.2 SMBus [0c05]: nVidia Corporation MCP79 SMBus [10de:0aa2] (rev b1)
00:03.3 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0a89] (rev b1)
00:03.4 RAM memory [0500]: nVidia Corporation Device [10de:0a98] (rev b1)
00:03.5 Co-processor [0b40]: nVidia Corporation MCP79 Co-processor [10de:0aa3] (rev b1)
00:04.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa5] (rev b1)
00:04.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa6] (rev b1)
00:06.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa7] (rev b1)
00:06.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa9] (rev b1)
00:08.0 Audio device [0403]: nVidia Corporation MCP79 High Definition Audio [10de:0ac0] (rev b1)
00:09.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Bridge [10de:0aab] (rev b1)
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP79 Ethernet [10de:0ab0] (rev b1)
00:0b.0 IDE interface [0101]: nVidia Corporation MCP79 SATA Controller [10de:0ab5] (rev b1)
00:10.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0aa0] (rev b1)
00:15.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac6] (rev b1)
00:16.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac7] (rev b1)
02:00.0 VGA compatible controller [0300]: nVidia Corporation C79 [GeForce 9400M] [10de:0863] (rev b1)
03:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01)
04:00.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW643 PCI Express1394b Controller (PHY/Link) [11c1:5901] (rev 07)
Bus 004 Device 003: ID 05ac:8213 Apple, Inc.
Bus 004 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 05ac:0236 Apple, Inc. Internal Keyboard/Trackpad (ANSI)
Bus 003 Device 002: ID 05ac:8242 Apple, Inc. IR Receiver [built-in]
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 05ac:8403 Apple, Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 05ac:8507 Apple, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
H/W path Device Class Description
=======
/0 bus Mac-F2268AC8
/0/0 processor Intel(R) Core(TM)2 Duo CPU P7550 @ 2.
/0/0/2 memory 32KiB L1 cache
/0/0/0.1 processor Logical CPU
/0/0/0.2 processor Logical CPU
/0/1 memory 32KiB L1 cache
/0/3 processor CPU
/0/3/5 memory 32KiB L1 cache
/0/3/0.1 processor Logical CPU
/0/3/0.2 processor Logical CPU
/0/4 memory 32KiB L1 cache
/0/6 memory 2GiB System Memory
/0/6/0 memory 1GiB SODIMM Synchronous 1067 MHz (0.9 ns)
/0/6/1 memory 1GiB SODIMM Synchronous 1067 MHz (0.9 ns)
/0/e memory 1MiB BIOS
/0/100 bridge MCP79 Host Bridge
/0/100/0.1 memory RAM memory
/0/100/3 bridge MCP79 LPC Bridge
/0/100/3.1 memory RAM memory
/0/100/3.2 bus MCP79 SMBus
/0/100/3.3 memory RAM memory
/0/100/3.4 memory RAM memory
/0/100/3.5 processor MCP79 Co-processor
/0/100/4 bus MCP79 OHCI USB 1.1 Controller
/0/100/4.1 bus MCP79 EHCI USB 2.0 Controller
/0/100/6 bus MCP79 OHCI USB 1.1 Controller
/0/100/6.1 bus MCP79 EHCI USB 2.0 Controller
/0/100/8 multimedia MCP79 High Definition Audio
/0/100/9 bridge MCP79 PCI Bridge
/0/100/a eth0 network MCP79 Ethernet
/0/100/b scsi0 storage MCP79 SATA Controller
/0/100/b/0 /dev/sda disk 160GB ST9160314ASG
/0/100/b/0/1 volume 200MiB EFI GPT partition
/0/100/b/0/2 /dev/sda2 volume 128GiB Darwin/OS X HFS+ partition
/0/100/b/0/3 /dev/sda3 volume 11GiB Windows FAT volume
/0/100/b/0/4 volume 139GiB EFI GPT partition
/0/100/b/1 /dev/cdrom disk DVDRW GS23N
/0/100/10 bridge MCP79 PCI Express Bridge
/0/100/10/0 display C79 [GeForce 9400M]
/0/100/15 bridge MCP79 PCI Express Bridge
/0/100/15/0 network BCM4322 802.11a/b/g/n Wireless LAN Control
/0/100/16 bridge MCP79 PCI Express Bridge
/0/100/16/0 bus FW643 PCI Express1394b Controller (PHY/Lin
/0/2 scsi6 storage
/0/2/0.0.0 /dev/sdb disk SD Card Reader
/0/2/0.0.0/0 /dev/sdb disk
/1 power Unknown
Linux myessail-MacBookPro 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:34:50 UTC 2010 i686 GNU/Linux
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.152686] Apple MacBookPro5 series board detected. Selecting PCI-method for reboots.
[ 0.161998] ACPI: EC: EC description table is found, configuring boot EC
[ 0.188699] ACPI: No dock devices found.
[ 0.278021] HEST: Table is not found!
[ 0.278396] usbcore: registered new interface driver usbfs
[ 0.278408] usbcore: registered new interface driver hub
[ 0.278429] usbcore: registered new device driver usb
[ 0.288026] Switching to clocksource tsc
[ 0.306116] pnp: PnP ACPI: found 8 devices
[ 0.376229] input: Lid Switch as /devices/
[ 0.376279] ACPI: Lid Switch [LID0]
[ 0.388695] Switching to clocksource hpet
[ 0.391401] ERST: Table is not found!
[ 0.405122] hub 1-0:1.0: USB hub found
[ 0.417583] hub 2-0:1.0: USB hub found
[ 0.475092] hub 3-0:1.0: USB hub found
[ 0.595819] hub 4-0:1.0: USB hub found
[ 0.595981] PNP: No PS/2 controller found. Probing ports directly.
[ 0.596862] i8042.c: No controller found.
[ 0.616281] device-mapper: multipath: version 1.1.1 loaded
[ 0.616284] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.619193] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.755820] isapnp: No Plug & Play device found
[ 0.780044] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 0.843127] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.861114] b43-pci-bridge 0000:03:00.0: power state changed by ACPI to D0
[ 0.861362] b43-pci-bridge 0000:03:00.0: power state changed by ACPI to D0
[ 0.861548] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 16 (level, low) -> IRQ 16
[ 0.861554] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 0.861621] b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[Z00F] -> GSI 23 (level, low) -> IRQ 23
[ 0.861627] b43-pci-bridge 0000:03:00.0: setting latency timer to 64
[ 0.881226] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x17, vendor 0x4243)
[ 0.881233] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x10, vendor 0x4243)
[ 0.881240] ssb: Core 2 found: PCI-E (cc 0x820, rev 0x0B, vendor 0x4243)
[ 0.881246] ssb: Core 3 found: PCI (cc 0x804, rev 0x0E, vendor 0x4243)
[ 0.881253] ssb: Core 4 found: USB 2.0 Device (cc 0x81A, rev 0x05, vendor 0x4243)
[ 0.881259] ssb: Core 5 found: UNKNOWN (cc 0x8FF, rev 0x00, vendor 0x4243)
[ 0.881265] ssb: Core 6 found: Internal Memory (cc 0x80E, rev 0x03, vendor 0x4243)
[ 0.926326] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 64:b9:e8:ba:1a:48
[ 0.926330] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
[ 0.929316] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 1.308182] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 1.452538] scsi6 : usb-storage 2-5:1.0
[ 1.452614] usbcore: registered new interface driver usb-storage
[ 1.748106] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 1.972806] hub 4-1:1.0: USB hub found
[ 2.300093] usb 3-5: new low speed USB device using ohci_hcd and address 2
[ 2.812093] usb 3-6: new full speed USB device using ohci_hcd and address 3
[ 3.125768] usb 4-1.1: new full speed USB device using ohci_hcd and address 3
[ 3.325770] usb 4-1.2: new full speed USB device using ohci_hcd and address 4
[ 3.513771] usb 4-1.3: new full speed USB device using ohci_hcd and address 5
[ 11.690923] lp: driver loaded but no devices found
[ 11.937055] applesmc: 1 fans found.
[ 11.974353] input: bcm5974 as /devices/
[ 11.974526] usbcore: registered new interface driver bcm5974
[ 12.025606] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8507)
[ 12.038933] input: Built-in iSight as /devices/
[ 12.039017] usbcore: registered new interface driver uvcvideo
[ 12.082575] usbcore: registered new interface driver btusb
[ 12.082878] usbcore: registered new interface driver hiddev
[ 12.088268] input: HID 05ac:820a as /devices/
[ 12.088353] generic-usb 0003:05AC:
[ 12.093220] input: HID 05ac:820b as /devices/
[ 12.093323] generic-usb 0003:05AC:
[ 12.093347] usbcore: registered new interface driver usbhid
[ 12.093349] usbhid: USB HID core driver
[ 12.114315] b43-phy0: Broadcom 4322 WLAN found (core revision 16)
[ 12.114657] apple 0003:05AC:
[ 12.122245] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/
[ 12.122333] apple 0003:05AC:
[ 12.131093] apple 0003:05AC:
[ 12.157177] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 8, Type 4, Revision 4)
[ 12.157294] b43: probe of ssb0:0 failed with error -95
[ 12.157324] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
[ 12.245702] [drm] nouveau 0000:02:00.0: BIT BIOS found
[ 12.245711] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[ 13.759605] Console: switching to colour frame buffer device 160x50
[ 13.928996] forcedeth 0000:00:0a.0: irq 43 for MSI/MSI-X
[ 14.357774] usb 4-1.2: USB disconnect, address 4
[ 14.524765] usb 4-1.3: USB disconnect, address 5
[ 16.229027] usb 4-2: new full speed USB device using ohci_hcd and address 6
[ 16.447800] hub 4-2:1.0: USB hub found
[ 16.758764] usb 4-2.4: new low speed USB device using ohci_hcd and address 7
[ 16.880438] input: USB Optical Mouse as /devices/
[ 16.880549] generic-usb 0003:15CA:
[ 24.368152] eth0: no IPv6 routers present
[ 86.898188] usb 4-2.4: USB disconnect, address 7
[ 87.097165] usb 4-2: reset full speed USB device using ohci_hcd and address 6
[ 87.276191] usb 4-2: device descriptor read/64, error -62
[ 87.561087] usb 4-2: device descriptor read/64, error -62
[ 87.840208] usb 4-2: reset full speed USB device using ohci_hcd and address 6
[ 88.021185] usb 4-2: device descriptor read/64, error -62
[ 88.305173] usb 4-2: device descriptor read/64, error -62
[ 88.584203] usb 4-2: reset full speed USB device using ohci_hcd and address 6
[ 88.993142] usb 4-2: device not accepting address 6, error -62
[ 89.169195] usb 4-2: reset full speed USB device using ohci_hcd and address 6
[ 89.576453] usb 4-2: device not accepting address 6, error -62
[ 89.681108] usb 4-2: USB disconnect, address 6
[ 89.857086] usb 4-2: new full speed USB device using ohci_hcd and address 8
[ 90.040173] usb 4-2: device descriptor read/64, error -62
[ 90.324194] usb 4-2: device descriptor read/64, error -62
[ 90.604147] usb 4-2: new full speed USB device using ohci_hcd and address 9
[ 90.788082] usb 4-2: device descriptor read/64, error -62
[ 91.076038] usb 4-2: device descriptor read/64, error -62
[ 91.352080] usb 4-2: new full speed USB device using ohci_hcd and address 10
[ 91.761030] usb 4-2: device not accepting address 10, error -62
[ 91.920037] usb 4-2: new full speed USB device using ohci_hcd and address 11
[ 92.329039] usb 4-2: device not accepting address 11, error -62
[ 133.508177] usb 4-2: new full speed USB device using ohci_hcd and address 12
[ 133.688189] usb 4-2: device descriptor read/64, error -62
[ 133.973166] usb 4-2: device descriptor read/64, error -62
[ 134.253189] usb 4-2: new full speed USB device using ohci_hcd and address 13
[ 134.436172] usb 4-2: device descriptor read/64, error -62
[ 134.724183] usb 4-2: device descriptor read/64, error -62
[ 135.005190] usb 4-2: new full speed USB device using ohci_hcd and address 14
[ 135.412155] usb 4-2: device not accepting address 14, error -62
[ 135.589166] usb 4-2: new full speed USB device using ohci_hcd and address 15
[ 135.996174] usb 4-2: device not accepting address 15, error -62
[ 159.972179] usb 4-2: new full speed USB device using ohci_hcd and address 16
[ 160.153187] usb 4-2: device descriptor read/64, error -62
[ 160.440188] usb 4-2: device descriptor read/64, error -62
[ 160.720192] usb 4-2: new full speed USB device using ohci_hcd and address 17
[ 160.905162] usb 4-2: device descriptor read/64, error -62
[ 161.192082] usb 4-2: device descriptor read/64, error -62
[ 161.472179] usb 4-2: new full speed USB device using ohci_hcd and address 18
[ 161.881152] usb 4-2: device not accepting address 18, error -62
[ 162.057131] usb 4-2: new full speed USB device using ohci_hcd and address 19
[ 162.464162] usb 4-2: device not accepting address 19, error -62
lo no wireless extensions.
eth0 no wireless extensions.
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
options iwlagn 11n_disable=1
> hal.1: read hal dataprocess 2018: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
22: PCI 0a.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.PWmYQHojxY6
SysFS ID: /devices/
SysFS BusID: 0000:00:0a.0
Hardware Class: network
Model: "nVidia MCP79 Ethernet"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0ab0 "MCP79 Ethernet"
SubVendor: pci 0x10de "nVidia Corporation"
SubDevice: pci 0xcb79
Revision: 0xb1
Driver: "forcedeth"
Driver Modules: "forcedeth"
Device File: eth0
Memory Range: 0x93486000-
I/O Ports: 0x21e0-0x21e7 (rw)
Memory Range: 0x93489000-
Memory Range: 0x93489300-
IRQ: 43 (6192 events)
HW Address: 64:b9:e8:ba:1a:48
Link detected: yes
Module Alias: "pci:v000010DEd
Driver Info #0:
Driver Status: forcedeth is active
Driver Activation Cmd: "modprobe forcedeth"
Config Status: cfg=new, avail=yes, need=no, active=unknown
28: PCI 300.0: 0280 Network controller
[Created at pci.318]
Unique ID: svHJ.jnA1zEZx189
Parent ID: Rgik.RRGuB29h369
SysFS ID: /devices/
SysFS BusID: 0000:03:00.0
Hardware Class: network
Model: "Broadcom BCM4322 802.11a/b/g/n Wireless LAN Controller"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x432b "BCM4322 802.11a/b/g/n Wireless LAN Controller"
SubVendor: pci 0x106b "Apple Computer Inc."
SubDevice: pci 0x008d
Revision: 0x01
Driver: "b43-pci-bridge"
Driver Modules: "ssb"
Memory Range: 0x93200000-
IRQ: 23 (7 events)
Module Alias: "pci:v000014E4d
Driver Info #0:
Driver Status: ssb is active
Driver Activation Cmd: "modprobe ssb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #25 (PCI bridge)
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
Module Size Used by
hidp 11664 0
parport_pc 26058 0
ppdev 5556 0
rfcomm 33811 4
binfmt_misc 6599 1
sco 7998 2
bnep 9542 2
l2cap 37008 17 hidp,rfcomm,bnep
snd_hda_
snd_hda_intel 22107 2
snd_hda_codec 87552 2 snd_hda_
snd_hwdep 5040 1 snd_hda_codec
snd_pcm 71475 2 snd_hda_
snd_seq_midi 4588 0
nouveau 516971 2
snd_rawmidi 17783 1 snd_seq_midi
ttm 56633 1 nouveau
snd_seq_midi_event 6047 1 snd_seq_midi
drm_kms_helper 30200 1 nouveau
b43 168681 0
snd_seq 47174 2 snd_seq_
hid_apple 4523 0
snd_timer 19067 2 snd_pcm,snd_seq
mac80211 231541 1 b43
snd_seq_device 5744 3 snd_seq_
drm 168054 4 nouveau,
joydev 8735 0
btusb 10969 2
usbhid 36882 0
bluetooth 50500 10 hidp,rfcomm,
bcm5974 7611 0
uvcvideo 55847 0
hid 67742 3 hidp,hid_
applesmc 24900 0
input_polldev 3491 1 applesmc
videodev 43098 1 uvcvideo
v4l1_compat 13359 2 uvcvideo,videodev
agpgart 32011 2 ttm,drm
i2c_algo_bit 5168 1 nouveau
mbp_nvidia_bl 1943 0
cfg80211 144470 2 b43,mac80211
snd 49006 13 snd_hda_
shpchp 29886 0
led_class 2633 2 b43,applesmc
soundcore 880 1 snd
snd_page_alloc 7120 2 snd_hda_
i2c_nforce2 5179 0
lp 7342 0
parport 31492 3 parport_pc,ppdev,lp
usb_storage 40172 0
ahci 19013 0
libahci 21667 4 ahci
firewire_ohci 21106 0
firewire_core 46643 1 firewire_ohci
ssb 39288 1 b43
forcedeth 49433 0
crc_itu_t 1383 1 firewire_core
|
Revision history for this message
|
#3 |
Hi,
You need to install the following Broadcom driver package using apt-get
or Synaptic package manager: bcmwl-kernel-source
This will of course require a working wirED Internet connection in
Ubuntu. (wired, not wireless)
For example: using the Terminal, you need to run the following commands
to install bcmwl-kernel-
sudo apt-get update
sudo apt-get install bcmwl-kernel-source
Then reboot and retest wireless using Network Manager.
A similar explanation can be found at the end of this thread:
https:/
Sere here for more details about PCI-ID 14e4:432b:
http://
Wireless adapters with PCI-ID 14e4:432b (like your wireless adapter)
require the installation of the wl driver, which means you need to
install the bcmwl-kernel-source package.
Regards,
Mark
|
Revision history for this message
|
#4 |
Thanks Mark Rijckenberg, that solved my question.
