DEll latitude D600 wireless not working in 11.10

Asked by John Bosch on 2011-10-26

Can anyone tell me why my wireless is not working and how to fix it from the output below?



john@john-Latitude-D600:~$ sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; sudo lshw -short; uname -a; dmesg | egrep 'acx|at76|ath|b43|bcm|brcm|CX|eth|ipw|ireless|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|ound|p54|prism|rtl|rt2|rt3|rt5|rt6|rt7|usb|witch|wl';sudo dmidecode|egrep 'anufact|roduct|erial|elease'; iwconfig; cat /etc/modprobe.d/* | egrep 'acx|at76|ath|b43|bcm|brcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|wmi|witch|wl'; cat /var/lib/NetworkManager/NetworkManager.state; sudo hwinfo --netcard ; ps -aux|egrep 'icd|etwork'; sudo lsmod
Ign oneiric InRelease
Ign oneiric InRelease
Ign oneiric-updates InRelease
Get:1 oneiric Release.gpg [72 B]
Ign oneiric-security InRelease
Hit oneiric Release
Hit oneiric Release.gpg
Get:2 oneiric-updates Release.gpg [198 B]
Hit oneiric/main Sources
Get:3 oneiric-security Release.gpg [198 B]
Hit oneiric Release
Hit oneiric/main i386 Packages
Get:4 oneiric-updates Release [32.4 kB]
Ign oneiric/main TranslationIndex
Get:5 oneiric-security Release [28.2 kB]
Hit oneiric/main Sources
Hit oneiric/restricted Sources
Hit oneiric/universe Sources
Hit oneiric/multiverse Sources
Hit oneiric/main i386 Packages
Ign oneiric/main Translation-en_CA
Hit oneiric/restricted i386 Packages
Ign oneiric/main Translation-en
Hit oneiric/universe i386 Packages
Hit oneiric/multiverse i386 Packages
Hit oneiric/main TranslationIndex
Hit oneiric/multiverse TranslationIndex
Hit oneiric/restricted TranslationIndex
Hit oneiric/universe TranslationIndex
Get:6 oneiric-updates/main Sources [56.8 kB]
Get:7 oneiric-updates/restricted Sources [14 B]
Get:8 oneiric-updates/universe Sources [4,319 B]
Get:9 oneiric-updates/multiverse Sources [1,032 B]
Get:10 oneiric-updates/main i386 Packages [106 kB]
Get:11 oneiric-updates/restricted i386 Packages [14 B]
Get:12 oneiric-updates/universe i386 Packages [21.2 kB]
Get:13 oneiric-updates/multiverse i386 Packages [2,703 B]
Get:14 oneiric-updates/main TranslationIndex [73 B]
Get:15 oneiric-updates/multiverse TranslationIndex [72 B]
Get:16 oneiric-updates/restricted TranslationIndex [70 B]
Get:17 oneiric-updates/universe TranslationIndex [73 B]
Get:18 oneiric-security/main Sources [4,957 B]
Get:19 oneiric-security/restricted Sources [14 B]
Get:20 oneiric-security/universe Sources [14 B]
Get:21 oneiric-security/multiverse Sources [14 B]
Get:22 oneiric-security/main i386 Packages [12.7 kB]
Get:23 oneiric-security/restricted i386 Packages [14 B]
Get:24 oneiric-security/universe i386 Packages [5,250 B]
Get:25 oneiric-security/multiverse i386 Packages [14 B]
Get:26 oneiric-security/main TranslationIndex [72 B]
Get:27 oneiric-security/multiverse TranslationIndex [70 B]
Get:28 oneiric-security/restricted TranslationIndex [70 B]
Get:29 oneiric-security/universe TranslationIndex [72 B]
Hit oneiric/main Translation-en_CA
Hit oneiric/main Translation-en
Hit oneiric/multiverse Translation-en
Hit oneiric/restricted Translation-en
Hit oneiric/universe Translation-en
Get:30 oneiric-updates/main Translation-en [55.3 kB]
Hit oneiric-updates/multiverse Translation-en
Hit oneiric-updates/restricted Translation-en
Get:31 oneiric-updates/universe Translation-en [14.4 kB]
Get:32 oneiric-security/main Translation-en [8,207 B]
Hit oneiric-security/multiverse Translation-en
Hit oneiric-security/restricted Translation-en
Get:33 oneiric-security/universe Translation-en [4,303 B]
Fetched 359 kB in 18s (19.5 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
The following extra packages will be installed:
  libhal1 libhd16
The following NEW packages will be installed:
  hwinfo libhal1 libhd16
0 upgraded, 3 newly installed, 0 to remove and 193 not upgraded.
Need to get 776 kB of archives.
After this operation, 2,314 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 oneiric/universe libhal1 i386 0.5.14-6 [77.1 kB]
Get:2 oneiric/universe libhd16 i386 16.0-2ubuntu1 [681 kB]
Get:3 oneiric/universe hwinfo i386 16.0-2ubuntu1 [18.2 kB]
Fetched 776 kB in 5s (137 kB/s)
Selecting previously deselected package libhal1.
(Reading database ... 243453 files and directories currently installed.)
Unpacking libhal1 (from .../libhal1_0.5.14-6_i386.deb) ...
Selecting previously deselected package libhd16.
Unpacking libhd16 (from .../libhd16_16.0-2ubuntu1_i386.deb) ...
Selecting previously deselected package hwinfo.
Unpacking hwinfo (from .../hwinfo_16.0-2ubuntu1_i386.deb) ...
Processing triggers for man-db ...
Setting up libhal1 (0.5.14-6) ...
Setting up libhd16 (16.0-2ubuntu1) ...
Setting up hwinfo (16.0-2ubuntu1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
       description: Ethernet interface
       product: NetXtreme BCM5705M Gigabit Ethernet
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:02:00.0
       logical name: eth0
       version: 01
       serial: 00:0f:1f:d2:0e:9d
       size: 100Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 66MHz
       capabilities: pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 duplex=full firmware=5705-v3.16 ip= latency=32 link=yes mingnt=64 multicast=yes port=twisted pair speed=100Mbit/s
       resources: irq:11 memory:faff0000-faffffff
  *-network:1 UNCLAIMED
       description: Network controller
       product: BCM4306 802.11a/b/g
       vendor: Broadcom Corporation
       physical id: 3
       bus info: pci@0000:02:03.0
       version: 03
       width: 32 bits
       clock: 33MHz
       capabilities: bus_master
       configuration: latency=32
       resources: memory:fafee000-fafeffff
lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

auto lo
iface lo inet loopback

00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 81)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 01)
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 01)
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01)
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV250 [Mobility FireGL 9000] [1002:4c66] (rev 02)
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet [14e4:165d] (rev 01)
02:01.0 CardBus bridge [0607]: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller [1217:7113] (rev 20)
02:01.1 CardBus bridge [0607]: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller [1217:7113] (rev 20)
02:03.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11a/b/g [14e4:4324] (rev 03)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 003: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse
H/W path Device Class Description
                               system Portable Computer
/0 bus 0D2125
/0/0 memory 64KiB BIOS
/0/400 processor Intel(R) Pentium(R) M processor 1.
/0/400/700 memory 8KiB L1 cache
/0/400/701 memory 2MiB L2 cache
/0/1000 memory 2GiB System Memory
/0/1000/0 memory 1GiB DIMM DDR Synchronous 266 MHz
/0/1000/1 memory 1GiB DIMM DDR Synchronous 266 MHz
/0/100 bridge 82855PM Processor to I/O Controlle
/0/100/1 bridge 82855PM Processor to AGP Controlle
/0/100/1/0 display Radeon RV250 [Mobility FireGL 9000
/0/100/1d bus 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-
/0/100/1d.1 bus 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-
/0/100/1d.2 bus 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-
/0/100/1d.7 bus 82801DB/DBM (ICH4/ICH4-M) USB2 EHC
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1e/0 eth0 network NetXtreme BCM5705M Gigabit Etherne
/0/100/1e/1 bridge OZ711EC1 SmartCardBus Controller
/0/100/1e/1.1 bridge OZ711EC1 SmartCardBus Controller
/0/100/1e/3 network BCM4306 802.11a/b/g
/0/100/1f bridge 82801DBM (ICH4-M) LPC Interface Br
/0/100/1f.1 scsi0 storage 82801DBM (ICH4-M) IDE Controller
/0/100/1f.1/0 /dev/sda disk 160GB WDC WD1600BEVE-0
/0/100/1f.1/0/1 /dev/sda1 volume 127GiB EXT4 volume
/0/100/1f.1/0/2 /dev/sda2 volume 20GiB Windows NTFS volume
/0/100/1f.1/0/3 /dev/sda3 volume 1495MiB Extended partition
/0/100/1f.1/0/3/5 /dev/sda5 volume 1495MiB Linux swap / Solaris parti
/0/100/1f.1/1 /dev/cdrom disk DVD-ROM GDR8082N
/0/100/1f.1/1/0 /dev/cdrom disk
/0/100/1f.5 multimedia 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-
/0/100/1f.6 communication 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-
/1 power DELL 00
Linux john-Latitude-D600 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 i686 i686 i386 GNU/Linux
[ 0.000000] APIC: switched to apic NOOP
[ 0.008829] SMP alternatives: switching to UP code
[ 0.086518] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.086522] HEST: Table not found.
[ 0.111394] usbcore: registered new interface driver usbfs
[ 0.111411] usbcore: registered new interface driver hub
[ 0.111444] usbcore: registered new device driver usb
[ 0.111866] Switching to clocksource pit
[ 0.139064] pnp: PnP ACPI: found 13 devices
[ 0.175881] Switching to clocksource acpi_pm
[ 0.176076] Switched to NOHz mode on CPU #0
[ 0.326053] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.326424] ACPI: Lid Switch [LID]
[ 0.344108] ERST: Table is not found!
[ 0.584330] hub 1-0:1.0: USB hub found
[ 0.584845] hub 2-0:1.0: USB hub found
[ 0.585164] hub 3-0:1.0: USB hub found
[ 0.585693] hub 4-0:1.0: USB hub found
[ 0.947875] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.007681] isapnp: No Plug & Play device found
[ 1.159737] hub 1-1:1.0: USB hub found
[ 1.227935] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.432419] usb 1-1.2: new low speed USB device number 3 using ehci_hcd
[ 1.534462] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95705A50) rev 3001] (PCI:33MHz:32-bit) MAC address 00:0f:1f:d2:0e:9d
[ 1.534470] tg3 0000:02:00.0: eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 1.534476] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.534480] tg3 0000:02:00.0: eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 1.583322] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[ 1.583804] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-1.2/input0
[ 1.584114] usbcore: registered new interface driver usbhid
[ 1.584117] usbhid: USB HID core driver
[ 19.264064] lp: driver loaded but no devices found
[ 19.902178] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:011d]
[ 20.266336] yenta_cardbus 0000:02:01.1: CardBus bridge found [1028:011d]
[ 21.285883] Console: switching to colour frame buffer device 128x48
[ 21.443967] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.675859] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 22.675865] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
[ 22.676141] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 389.279941] tg3 0000:02:00.0: eth0: Link is down
[ 881.609975] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 881.609989] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
[ 7603.655337] tg3 0000:02:00.0: eth0: Link is down
[ 7605.272465] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 7605.272479] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
 Release Date: 06/29/2005
  Serial services are supported (int 14h)
 Manufacturer: Dell Computer Corporation
 Product Name: Latitude D600
 Serial Number: 28SP661
 Manufacturer: Dell Computer Corporation
 Product Name: 0D2125
 Serial Number: .28SP661.CN486434BC5245.
 Manufacturer: Dell Computer Corporation
 Serial Number: 28SP661
 Manufacturer: Intel
 Port Type: Serial Port 16550A Compatible
 Manufacturer: Not Specified
 Serial Number: Not Specified
 Manufacturer: Not Specified
 Serial Number: Not Specified
 Manufacturer: Sony
 SBDS Serial Number: 0001
 SBDS Manufacture Date: 2004-04-18
lo no wireless extensions.

eth0 no wireless extensions.

install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
# Warning: This file is autogenerated by bcmwl. All changes to this file will be lost.
blacklist b43
blacklist b43legacy
blacklist bcm43xx
blacklist brcm80211
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
# wl module from Broadcom conflicts with ssb
blacklist b43legacy
blacklist b43
blacklist brcm80211
blacklist brcmsmac
install wl /sbin/modprobe --ignore-install wl $CMDLINE_OPTS

> hal.1: read hal dataprocess 2867: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
21: PCI 200.0: 0200 Ethernet controller
  [Created at pci.318]
  Unique ID: rBUF.jGtOSOS7XzF
  Parent ID: 6NW+.+ISWpD3pbdC
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:00.0
  SysFS BusID: 0000:02:00.0
  Hardware Class: network
  Model: "Dell Latitude D400"
  Vendor: pci 0x14e4 "Broadcom"
  Device: pci 0x165d "NetXtreme BCM5705M Gigabit Ethernet"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x865d "Latitude D400"
  Revision: 0x01
  Driver: "tg3"
  Driver Modules: "tg3"
  Device File: eth0
  Memory Range: 0xfaff0000-0xfaffffff (rw,non-prefetchable)
  IRQ: 11 (94076 events)
  HW Address: 00:0f:1f:d2:0e:9d
  Link detected: yes
  Module Alias: "pci:v000014E4d0000165Dsv00001028sd0000865Dbc02sc00i00"
  Driver Info #0:
    Driver Status: tg3 is active
    Driver Activation Cmd: "modprobe tg3"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #15 (PCI bridge)

24: PCI 203.0: 0280 Network controller
  [Created at pci.318]
  Unique ID: QOEa.xWvGkIu+9u2
  Parent ID: 6NW+.+ISWpD3pbdC
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:03.0
  SysFS BusID: 0000:02:03.0
  Hardware Class: network
  Model: "Dell Truemobile 1450 MiniPCI"
  Vendor: pci 0x14e4 "Broadcom"
  Device: pci 0x4324 "BCM4309 802.11a/b/g"
  SubVendor: pci 0x1028 "Dell"
  SubDevice: pci 0x0003 "Truemobile 1450 MiniPCI"
  Revision: 0x03
  Memory Range: 0xfafee000-0xfafeffff (rw,non-prefetchable)
  IRQ: 11 (94076 events)
  Module Alias: "pci:v000014E4d00004324sv00001028sd00000003bc02sc80i00"
  Driver Info #0:
    Driver Status: ssb is not active
    Driver Activation Cmd: "modprobe ssb"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #15 (PCI bridge)
Warning: bad ps syntax, perhaps a bogus '-'? See
root 526 0.0 0.2 26664 4688 ? Ssl 19:21 0:00 NetworkManager
root 1740 0.0 0.0 2736 1204 ? S 19:35 0:00 /sbin/dhclient -d -4 -sf /usr/lib/NetworkManager/nm-dhcp-client.action -pf /var/run/ -lf /var/lib/dhcp/ -cf /var/run/nm-dhclient-eth0.conf eth0
john 2879 0.0 0.0 5336 776 pts/0 S+ 21:43 0:00 egrep --color=auto icd|etwork
Module Size Used by
nls_utf8 12493 1
udf 83826 1
crc_itu_t 12627 1 udf
bnep 17923 2
rfcomm 38408 0
bluetooth 148839 10 bnep,rfcomm
joydev 17393 0
ppdev 12849 0
radeon 925020 2
snd_intel8x0 33318 2
snd_ac97_codec 106082 1 snd_intel8x0
ac97_bus 12642 1 snd_ac97_codec
dcdbas 14098 0
snd_pcm 80468 2 snd_intel8x0,snd_ac97_codec
pcmcia 39822 0
snd_seq_midi 13132 0
snd_rawmidi 25241 1 snd_seq_midi
parport_pc 32114 1
video 18908 0
yenta_socket 27428 0
pcmcia_rsrc 18367 1 yenta_socket
pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc
snd_seq_midi_event 14475 1 snd_seq_midi
snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event
binfmt_misc 17292 1
ttm 65224 1 radeon
drm_kms_helper 32889 1 radeon
snd_timer 28932 2 snd_pcm,snd_seq
drm 192226 4 radeon,ttm,drm_kms_helper
snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq
psmouse 73673 0
serio_raw 12990 0
i2c_algo_bit 13199 1 radeon
snd 55902 11 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 12600 1 snd
snd_page_alloc 14115 2 snd_intel8x0,snd_pcm
shpchp 32356 0
lp 17455 0
parport 40930 3 ppdev,parport_pc,lp
usbhid 41905 0
hid 77367 1 usbhid
tg3 132972 0

Question information

English Edit question
Ubuntu b43-fwcutter Edit question
No assignee Edit question
Last query:
Last reply:
Ubfan (ubfan1) said : #1

Your 4306 chip is well supported by the b43legacy driver, all it needs is for you to install the firmware.
The proprietary Broadcom firmware is installed by installing the b43-fwcutter package and accepting the download offer:
In a terminal type:
sudo apt-get install b43-fwcutter

Or you can even use the open source firmware by installing the firmware-b43-installer package
The proprietary Broadcom driver you installed/activated has had problems since 11.04, and may not work, but you will have to get rid of it to make use of the b43legacy driver -- deactivate/purge/remove completely the Broadcom STA driver you installed. Check the files in /etc/modprobe.d for the exact line "blacklist b43legacy" and delete any that still exist after removing the Broadcom STA package. Remove the install wl ... line if it still exists in any file.
Wireless should start working for you.
Check the link for more info:

Can you help with this problem?

Provide an answer of your own, or ask John Bosch for more information if necessary.

To post a message you must log in.