Codec + Mixer: IDT 92HD75B3X5 - STAC92xx Analog [STAC92xx Analog] Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) - sound not working on HP Pavilion dv6-1205ee Entertainment Notebook PC in Ubuntu 9.04
Hello,
i have just installed ubuntu 9.04 on my new laptop but i can't hear sound
HP Pavilion dv6-1205ee Entertainment Notebook PC
http://
uname -a
Linux 2.6.28-15-generic #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 i686 GNU/Linux
lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series]
01:00.1 Audio device: ATI Technologies Inc R700 Audio Device [Radeon HD 4000 Series]
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
06:00.0 FireWire (IEEE 1394): JMicron Technologies, Inc. IEEE 1394 Host Controller
06:00.1 System peripheral: JMicron Technologies, Inc. SD/MMC Host Controller
06:00.2 SD Host controller: JMicron Technologies, Inc. Standard SD Host Controller
06:00.3 System peripheral: JMicron Technologies, Inc. MS Host Controller
06:00.4 System peripheral: JMicron Technologies, Inc. xD Host Controller
lsb_release -d
Description: Ubuntu 9.04
i found the sound icon in the panel but i can't hear any voice
when i enter preferences and choose sound i found those devices
Playback : HDA intel - STAC92xx Analf\og (pulse Audio
IDR 92HD75B3X5(Oss Mixer)
HDA intel (alsa mixer
HDA ATI HDMI (Alsa mixer)
Capture : Monitor of HDA Intel -STAC92XX Analog ( Pulse Audio
Capture : HDA Intel -STAC92XX Analog ( Pulse Audio
could you please help me
thanks
Question information
- Language:
- English Edit question
- Status:
- Solved
- Assignee:
- No assignee Edit question
- Solved by:
- Mark Rijckenberg
- Solved:
- Last query:
- Last reply:
Revision history for this message
![]() |
#1 |
sudo /etc/init.
If this doesn't change anything you could go to
http://
Revision history for this message
![]() |
#2 |
For the beginning you may try:
HDA intel (alsa mixer)
##this should give lots of options to (de)activate modules.
Options should be consistent, hence try setting everything to ALSA in
system preferences -> audio
This will use PulseAudio:
Capture : HDA Intel -STAC92XX Analog ( Pulse Audio)
Unmute at least master, pci, external amplifier
Details can be viewed not only via panel applet, this will open ALSA options in a terminal:
alsamixer
The GUI can be installed via Synaptic, package name:
gnome-alsamixer
##universe repository needs to be enabled
Reference:
http://
https:/
https:/
https:/
Revision history for this message
![]() |
#3 |
https:/
Please send us the output from step 3 and step 4
Revision history for this message
![]() |
#4 |
Hello Ernst Zlo ;
:~$ sudo /etc/init.
:
* Resetting ALSA... amixer: Invalid command!
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
Invalid card number.
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
i will try the link you typed but is there defined step to follow .?
Thanks
Revision history for this message
![]() |
#5 |
https:/
Please send us the output from step 3 and step 4
Revision history for this message
![]() |
#6 |
Hello
Ernst Zlo ,
lspci -v
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Hewlett-Packard Company Device 3628
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at da100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
01:00.1 Audio device: ATI Technologies Inc R700 Audio Device [Radeon HD 4000 Series]
Subsystem: Hewlett-Packard Company Device 3628
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at da010000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [100] Vendor Specific Information <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
i stopped here
(3) Check to see if the ALSA driver for your sound card exists. Go to http://
i can't understand
Revision history for this message
![]() |
#7 |
Hi Mark Rijckenberg
i run the steps and it is loading now while it finished i will give u the output
Revision history for this message
![]() |
#8 |
hello
this is the output
romio@Ramy-LP:~$ wget -O alsa-info.sh http://
--2009-09-28 20:13:49-- http://
Connecting to 212.20.107.51:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: http://
--2009-09-28 20:13:51-- http://
Resolving git.alsa-
Reusing existing connection to 212.20.107.51:80.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/plain]
Saving to: `alsa-info.sh'
[ <=> ] 26,584 27.9K/s in 0.9s
2009-09-28 20:13:57 (27.9 KB/s) - `alsa-info.sh' saved [26584]
romio@Ramy-LP:~$ bash alsa-info.sh --pastebin
WARNING: All config files need .conf: /etc/modprobe.
ALSA Information Script v 0.4.58
-------
This script visits the following commands/files to collect diagnostic
information about your ALSA installation and sound related hardware.
dmesg
lspci
lsmod
aplay
amixer
alsactl
/proc/asound/
/sys/class/sound/
~/.asoundrc (etc.)
See 'alsa-info.sh --help' for command line options.
WARNING: All config files need .conf: /etc/modprobe.
Automatically upload ALSA information to pastebin? [y/N] : y
Uploading information to www.pastebin.ca ... Done!
Your ALSA information is located at http://
Please inform the person helping you.
romio@Ramy-LP:~$ bash alsa-info.sh --pastebin
WARNING: All config files need .conf: /etc/modprobe.
ALSA Information Script v 0.4.58
-------
This script visits the following commands/files to collect diagnostic
information about your ALSA installation and sound related hardware.
dmesg
lspci
lsmod
aplay
amixer
alsactl
/proc/asound/
/sys/class/sound/
~/.asoundrc (etc.)
See 'alsa-info.sh --help' for command line options.
WARNING: All config files need .conf: /etc/modprobe.
Automatically upload ALSA information to pastebin? [y/N] : y
Uploading information to www.pastebin.ca ... Done!
Your ALSA information is located at http://
Please inform the person helping you.
romio@Ramy-LP:~$ cat /proc/asound/cards; sudo aptitude install gnome-alsamixer asoundconf-gtk alsa-utils flashplugin-
0 [Intel ]: HDA-Intel - HDA Intel
1 [HDMI ]: HDA-Intel - HDA ATI HDMI
Reading package lists... Done
Building dependency tree
Reading state information... Done
Initializing package states... Done
Writing extended state information... Done
The following NEW packages will be installed:
asoundconf-gtk flashplugin-
libpulse-
The following packages will be REMOVED:
linux-
0 packages upgraded, 14 newly installed, 2 to remove and 0 not upgraded.
Need to get 434kB of archives. After unpacking 71.7MB will be freed.
Do you want to continue? [Y/n/?] y
Writing extended state information... Done
Get:1 http://
Get:2 http://
Get:3 http://
Get:4 http://
Get:5 http://
Get:6 http://
Get:7 http://
Get:8 http://
Get:9 http://
Get:10 http://
Get:11 http://
Get:12 http://
Get:13 http://
Get:14 http://
Fetched 434kB in 15s (28.4kB/s)
Preconfiguring packages ...
(Reading database ... 123621 files and directories currently installed.)
Removing linux-headers-
Removing linux-headers-
^[[6~^[
(Reading database ... 107320 files and directories currently installed.)
Unpacking asoundconf-gtk (from .../asoundconf-
Selecting previously deselected package flashplugin-
Unpacking flashplugin-
Selecting previously deselected package flashplugin-
Unpacking flashplugin-nonfree (from .../flashplugin
Selecting previously deselected package flashplugin-
Unpacking flashplugin-
Selecting previously deselected package gnome-alsamixer.
Unpacking gnome-alsamixer (from .../gnome-
Selecting previously deselected package libgconfmm-2.6-1c2.
Unpacking libgconfmm-2.6-1c2 (from .../libgconfmm-
Selecting previously deselected package libglademm-
Unpacking libglademm-2.4-1c2a (from .../libglademm-
Selecting previously deselected package libpulse-
Unpacking libpulse-
Selecting previously deselected package pavumeter.
Unpacking pavumeter (from .../pavumeter_
Selecting previously deselected package pavucontrol.
Unpacking pavucontrol (from .../pavucontrol
Selecting previously deselected package paman.
Unpacking paman (from .../paman_
Selecting previously deselected package pulseaudio-
Unpacking pulseaudio-
Selecting previously deselected package paprefs.
Unpacking paprefs (from .../paprefs_
Selecting previously deselected package padevchooser.
Unpacking padevchooser (from .../padevchoose
Processing triggers for man-db ...
Setting up asoundconf-gtk (1.6-0ubuntu1) ...
Setting up flashplugin-
Downloading...
--2009-09-28 20:17:10-- http://
Resolving archive.
Connecting to archive.
HTTP request sent, awaiting response... 200 OK
Length: 4023856 (3.8M) [application/
Saving to: `./adobe-
0K .......... .......... .......... .......... .......... 1% 14.8K 4m22s
50K .......... .......... .......... .......... .......... 2% 29.1K 3m15s
100K .......... .......... .......... .......... .......... 3% 33.0K 2m46s
150K .......... .......... .......... .......... .......... 5% 13.4K 3m13s
200K .......... .......... .......... .......... .......... 6% 99.1M 2m32s
250K .......... .......... .......... .......... .......... 7% 27.0K 2m27s
300K .......... .......... .......... .......... .......... 8% 45.0K 2m16s
350K .......... .......... .......... .......... .......... 10% 42.9K 2m8s
400K .......... .......... .......... .......... .......... 11% 32.1K 2m4s
450K .......... .......... .......... .......... .......... 12% 51.6K 1m57s
500K .......... .......... .......... .......... .......... 13% 48.3K 1m51s
550K .......... .......... .......... .......... .......... 15% 48.1K 1m46s
600K .......... .......... .......... .......... .......... 16% 48.2K 1m41s
650K .......... .......... .......... .......... .......... 17% 49.5K 97s
700K .......... .......... .......... .......... .......... 19% 40.7K 95s
750K .......... .......... .......... .......... .......... 20% 47.9K 91s
800K .......... .......... .......... .......... .......... 21% 45.0K 89s
850K .......... .......... .......... .......... .......... 22% 50.3K 86s
900K .......... .......... .......... .......... .......... 24% 38.6K 84s
950K .......... .......... .......... .......... .......... 25% 33.8K 83s
1000K .......... .......... .......... .......... .......... 26% 49.5K 80s
1050K .......... .......... .......... .......... .......... 27% 50.6K 78s
1100K .......... .......... .......... .......... .......... 29% 52.3K 75s
1150K .......... .......... .......... .......... .......... 30% 52.0K 73s
1200K .......... .......... .......... .......... .......... 31% 51.5K 71s
1250K .......... .......... .......... .......... .......... 33% 51.0K 69s
1300K .......... .......... .......... .......... .......... 34% 52.3K 67s
1350K .......... .......... .......... .......... .......... 35% 51.0K 65s
1400K .......... .......... .......... .......... .......... 36% 52.4K 63s
1450K .......... .......... .......... .......... .......... 38% 52.4K 62s
1500K .......... .......... .......... .......... .......... 39% 52.4K 60s
1550K .......... .......... .......... .......... .......... 40% 52.3K 58s
1600K .......... .......... .......... .......... .......... 41% 52.4K 56s
1650K .......... .......... .......... .......... .......... 43% 52.4K 55s
1700K .......... .......... .......... .......... .......... 44% 52.3K 53s
1750K .......... .......... .......... .......... .......... 45% 52.3K 52s
1800K .......... .......... .......... .......... .......... 47% 52.3K 50s
1850K .......... .......... .......... .......... .......... 48% 52.4K 49s
1900K .......... .......... .......... .......... .......... 49% 52.4K 47s
1950K .......... .......... .......... .......... .......... 50% 51.0K 46s
2000K .......... .......... .......... .......... .......... 52% 52.4K 44s
2050K .......... .......... .......... .......... .......... 53% 52.4K 43s
2100K .......... .......... .......... .......... .......... 54% 51.8K 42s
2150K .......... .......... .......... .......... .......... 55% 52.2K 40s
2200K .......... .......... .......... .......... .......... 57% 52.3K 39s
2250K .......... .......... .......... .......... .......... 58% 50.3K 38s
2300K .......... .......... .......... .......... .......... 59% 52.2K 36s
2350K .......... .......... .......... .......... .......... 61% 52.3K 35s
2400K .......... .......... .......... .......... .......... 62% 52.3K 34s
2450K .......... .......... .......... .......... .......... 63% 48.3K 33s
2500K .......... .......... .......... .......... .......... 64% 52.4K 31s
2550K .......... .......... .......... .......... .......... 66% 44.6K 30s
2600K .......... .......... .......... .......... .......... 67% 52.3K 29s
2650K .......... .......... .......... .......... .......... 68% 40.3K 28s
2700K .......... .......... .......... .......... .......... 69% 11.0K 28s
2750K .......... .......... .......... .......... .......... 71% 55.0M 27s
2800K .......... .......... .......... .......... .......... 72% 39.7K 25s
2850K .......... .......... .......... .......... .......... 73% 46.2K 24s
2900K .......... .......... .......... .......... .......... 75% 51.9K 23s
2950K .......... .......... .......... .......... .......... 76% 52.1K 22s
3000K .......... .......... .......... .......... .......... 77% 52.1K 21s
3050K .......... .......... .......... .......... .......... 78% 51.7K 19s
3100K .......... .......... .......... .......... .......... 80% 52.0K 18s
3150K .......... .......... .......... .......... .......... 81% 51.4K 17s
3200K .......... .......... .......... .......... .......... 82% 50.4K 16s
3250K .......... .......... .......... .......... .......... 83% 50.8K 15s
3300K .......... .......... .......... .......... .......... 85% 51.4K 13s
3350K .......... .......... .......... .......... .......... 86% 52.4K 12s
3400K .......... .......... .......... .......... .......... 87% 52.4K 11s
3450K .......... .......... .......... .......... .......... 89% 52.3K 10s
3500K .......... .......... .......... .......... .......... 90% 52.2K 9s
3550K .......... .......... .......... .......... .......... 91% 51.9K 7s
3600K .......... .......... .......... .......... .......... 92% 52.4K 6s
3650K .......... .......... .......... .......... .......... 94% 52.4K 5s
3700K .......... .......... .......... .......... .......... 95% 50.9K 4s
3750K .......... .......... .......... .......... .......... 96% 52.3K 3s
3800K .......... .......... .......... .......... .......... 97% 49.6K 2s
3850K .......... .......... .......... .......... .......... 99% 50.0K 1s
3900K .......... .......... ......... 100% 53.8K=88s
2009-09-28 20:18:40 (44.5 KB/s) - `./adobe-
Download done.
Flash Plugin installed.
Setting up flashplugin-nonfree (10.0.32.
Setting up flashplugin-
Setting up gnome-alsamixer (0.9.7~
Setting up libgconfmm-2.6-1c2 (2.24.0-0ubuntu1) ...
Setting up libglademm-2.4-1c2a (2.6.7-1) ...
Setting up libpulse-
Setting up pavumeter (0.9.3-1ubuntu1) ...
Setting up pavucontrol (0.9.7-1ubuntu3) ...
Setting up paman (0.9.4-1ubuntu2) ...
Setting up pulseaudio-
Setting up paprefs (0.9.7-0ubuntu1) ...
Setting up padevchooser (0.9.3-2ubuntu4) ...
Processing triggers for libc6 ...
ldconfig deferred processing now taking place
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
Writing extended state information... Done
Names of available sound cards:
Intel
HDMI
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
*-multimedia
description: Audio device
product: R700 Audio Device [Radeon HD 4000 Series]
vendor: ATI Technologies Inc
physical id: 0.1
bus info: pci@0000:01:00.1
version: 00
width: 32 bits
clock: 33MHz
*-multimedia
description: Audio device
product: 82801I (ICH9 Family) HD Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 03
width: 64 bits
clock: 33MHz
total 0
crw-rw----+ 1 root audio 116, 33 2009-09-28 19:54 timer
crw-rw----+ 1 root audio 116, 1 2009-09-28 19:54 seq
crw-rw----+ 1 root audio 116, 17 2009-09-28 19:54 pcmC0D1p
crw-rw----+ 1 root audio 116, 4 2009-09-28 19:54 hwC0D0
crw-rw----+ 1 root audio 116, 0 2009-09-28 19:54 controlC0
crw-rw----+ 1 root audio 116, 51 2009-09-28 19:54 pcmC1D3p
crw-rw----+ 1 root audio 116, 36 2009-09-28 19:54 hwC1D0
crw-rw----+ 1 root audio 116, 32 2009-09-28 19:54 controlC1
drwxr-xr-x 2 root root 240 2009-09-28 19:54 .
crw-rw----+ 1 root audio 116, 24 2009-09-28 19:55 pcmC0D0c
crw-rw----+ 1 root audio 116, 16 2009-09-28 19:57 pcmC0D0p
drwxr-xr-x 17 root root 4400 2009-09-28 20:18 ..
Sound Driver:
Kernel: Linux Ramy-LP 2.6.28-15-generic #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 i686
Config options: 0
Installed drivers:
Type 10: ALSA emulation
Card config:
HDA Intel at 0xda100000 irq 22
HDA ATI HDMI at 0xda010000 irq 17
Audio devices:
0: STAC92xx Analog (DUPLEX)
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Timers:
7: system timer
Mixers:
0: IDT 92HD75B3X5
1: ATI R6xx HDMI
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93)
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series] [1002:9553]
01:00.1 Audio device [0403]: ATI Technologies Inc R700 Audio Device [Radeon HD 4000 Series] [1002:aa38]
02:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
06:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technologies, Inc. IEEE 1394 Host Controller [197b:2380]
06:00.1 System peripheral [0880]: JMicron Technologies, Inc. SD/MMC Host Controller [197b:2382]
06:00.2 SD Host controller [0805]: JMicron Technologies, Inc. Standard SD Host Controller [197b:2381]
06:00.3 System peripheral [0880]: JMicron Technologies, Inc. MS Host Controller [197b:2383]
06:00.4 System peripheral [0880]: JMicron Technologies, Inc. xD Host Controller [197b:2384]
/sbin/alsactl
snd_hda_
snd_hda_codec_idt 65548 1
snd_hda_intel 34120 5
snd_hda_codec 83584 3 snd_hda_
snd_pcm_oss 45984 0
snd_mixer_oss 22912 1 snd_pcm_oss
snd_hwdep 15364 1 snd_hda_codec
snd_pcm 82948 4 snd_hda_
snd_seq_oss 36224 0
snd_seq_midi_event 15232 1 snd_seq_oss
snd_seq 57584 4 snd_seq_
snd_timer 29192 2 snd_pcm,snd_seq
snd_seq_device 15372 2 snd_seq_oss,snd_seq
snd 66852 20 snd_hda_
soundcore 15200 1 snd
snd_page_alloc 17032 2 snd_hda_
romio@Ramy-LP:~$
Revision history for this message
![]() |
#9 |
hello sam
i have tried all those devices and the same problem is
Revision history for this message
![]() |
#10 |
Hi Romionet,
Your ALSA output shows the following problem:
# ALSA Version
# ------------
#
# Driver version: 1.0.20
# Library version: 1.0.20
# Utilities version: 1.0.18
ALSA Utilities version is still on version 1.0.18, but it should be the same version as the ALSA driver and library version.
Please follow step 1 from
https:/
to upgrade all 3 ALSA components to the same new driver version, which is v1.0.21
Step 1
!!! To avoid problems during the ALSA utils compilation and installation procedure, please make sure to stop ALSA with the following command BEFORE starting the ALSA upgrade procedure:
sudo /etc/init.
!!! To avoid problems during the ALSA driver compilation and installation procedure, please make sure to replace the following line
sudo ./configure --with-
with the following line in the ALSA driver compilation procedure:
sudo ./configure
Using these guidelines, please try upgrading the ALSA sound system to the newest version, then reboot and retest sound.
Here is the URL:
http://
If sound still does not work using ALSA v1.0.21, please try this procedure:
a) Open a terminal and edit /etc/modprobe.
sudo gedit /etc/modprobe.
When the file is open, add the following 4 lines to the end of the file after "options snd-pcsp index=-2"
options snd-pcsp index=-2
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
options snd-hda-intel model=hp-m4
b) Save change to file /etc/modprobe.
Regards,
Mark
Revision history for this message
![]() |
#11 |
Hello Mark Rijckenberg ,
it solved my problem .. thank you very much i'm very gratefull to u
Revision history for this message
![]() |
#12 |
Thanks Mark Rijckenberg, that solved my question.
Revision history for this message
![]() |
#14 |
Hi Mark Rijckenberg, I also got sound working on my ubuntu system following your steps. Thanks a lot!
Revision history for this message
![]() |
#15 |
Thanks Mark, it also work for me with sound card with chipset: idt 92HD75B3X5 !