Mic not work - Feisty on Packard Bell
Hi,
I have a Packard Bell Desktop with Intel® High Definition Audio subsystem using the Realtek ALC880 audio codec on a Sunshine DDR 2 (GA-8I915PMD) Ver 0.1 Mother board.
I have recently changed to Ubuntu Linux and am discovering its possibilities. This mic input at front of machine worked with Win XP, no problem. There is no mic input at the back of the machine.
I can hear my own voice coming out through the speakers as I talk. However Skype will not pick it up, or even record a message through Skype Test Call. Audacity, or my other audio packages not allow recording through it.
This is incredibly frustrating,
Ive attached the following text files of my config as per https:/
Hope this is of use and am looking forward to hearing from you,
tail -2 /proc/asound/
0: Realtek ALC880
1: SAA7134 Mixer
amixer <RET>
Simple mixer control 'Headphone',0
Capabilities: pswitch
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 40 [62%] [-24.00dB] [on]
Front Right: Playback 40 [62%] [-24.00dB] [on]
Simple mixer control 'Front Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 65
Mono:
Front Left: Playback 58 [89%] [23.00dB] [on]
Front Right: Playback 58 [89%] [23.00dB] [on]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 0 [0%] [-64.00dB] [off]
Front Right: Playback 0 [0%] [-64.00dB] [off]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 0 [0%] [-64.00dB] [off]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 0 [0%] [-64.00dB] [off]
Simple mixer control 'Side',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 0 [0%] [-64.00dB] [off]
Front Right: Playback 0 [0%] [-64.00dB] [off]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 65
Mono:
Front Left: Playback 55 [85%] [20.00dB] [on]
Front Right: Playback 55 [85%] [20.00dB] [on]
Simple mixer control 'CD',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 65
Mono:
Front Left: Playback 52 [80%] [17.00dB] [on]
Front Right: Playback 52 [80%] [17.00dB] [on]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 65
Mono:
Front Left: Playback 0 [0%] [-35.00dB] [off]
Front Right: Playback 0 [0%] [-35.00dB] [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined cswitch cswitch-joined
Playback channels: Mono
Capture channels: Mono
Mono: Playback [off] Capture [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 35
Front Left: Capture 18 [51%] [18.00dB] [on]
Front Right: Capture 18 [51%] [18.00dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 35
Front Left: Capture 0 [0%] [0.00dB] [on]
Front Right: Capture 0 [0%] [0.00dB] [on]
Simple mixer control 'Capture',2
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 35
Front Left: Capture 3 [9%] [3.00dB] [on]
Front Right: Capture 3 [9%] [3.00dB] [on]
Simple mixer control 'Input Source',0
Capabilities: enum
Items: 'Mic' 'Front Mic' 'Line' 'CD'
Item0: 'Mic'
Simple mixer control 'Input Source',1
Capabilities: enum
Items: 'Mic' 'Front Mic' 'Line' 'CD'
Item0: 'Mic'
Simple mixer control 'Input Source',2
Capabilities: enum
Items: 'Mic' 'Front Mic' 'Line' 'CD'
Item0: 'Mic'
lspci -nv <RET>
00:00.0 0600: 8086:2580 (rev 0e)
Subsystem: 1631:2580
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:01.0 0604: 8086:2581 (rev 0e) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d0000000-efffffff
Prefetchable memory behind bridge: f0200000-f02fffff
Capabilities: [88] Subsystem: 8086:0000
Capabilities: [80] Power Management version 2
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
00:1b.0 0403: 8086:2668 (rev 03)
Subsystem: 1631:e011
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f0100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [70] Express Unknown type IRQ 0
00:1d.0 0c03: 8086:2658 (rev 03) (prog-if 00 [UHCI])
Subsystem: 1631:e011
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at bc00 [size=32]
00:1d.1 0c03: 8086:2659 (rev 03) (prog-if 00 [UHCI])
Subsystem: 1631:e011
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at b000 [size=32]
00:1d.2 0c03: 8086:265a (rev 03) (prog-if 00 [UHCI])
Subsystem: 1631:e011
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at b400 [size=32]
00:1d.3 0c03: 8086:265b (rev 03) (prog-if 00 [UHCI])
Subsystem: 1631:e011
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at b800 [size=32]
00:1d.7 0c03: 8086:265c (rev 03) (prog-if 20 [EHCI])
Subsystem: 1631:e011
Flags: bus master, medium devsel, latency 0, IRQ 18
Memory at f0104000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 0604: 8086:244e (rev d3) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f0000000-f00fffff
Capabilities: [50] Subsystem: 0000:0000
00:1f.0 0601: 8086:2640 (rev 03)
Flags: bus master, medium devsel, latency 0
00:1f.2 0101: 8086:2651 (rev 03) (prog-if 80 [Master])
Subsystem: 1631:e011
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at f000 [size=16]
Capabilities: [70] Power Management version 2
00:1f.3 0c05: 8086:266a (rev 03)
Subsystem: 1631:e011
Flags: medium devsel, IRQ 11
I/O ports at 0500 [size=32]
01:00.0 0300: 10de:0163 (rev a1) (prog-if 00 [VGA])
Subsystem: 1458:3400
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at e1000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at f0200000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [78] Express Endpoint IRQ 0
02:00.0 0703: 163c:3052 (rev 04) (prog-if 00 [Generic])
Subsystem: 122d:3052
Flags: bus master, stepping, medium devsel, latency 32, IRQ 17
Memory at f0007000 (32-bit, non-prefetchable) [size=4K]
I/O ports at a000 [size=256]
Capabilities: [80] Power Management version 2
02:01.0 0480: 1131:7133 (rev d0)
Subsystem: 1043:4857
Flags: bus master, medium devsel, latency 32, IRQ 19
Memory at f0004000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
02:05.0 0200: 10ec:8139 (rev 10)
Subsystem: 1631:e011
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at a400 [size=256]
Memory at f0005000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
02:07.0 0c00: 104c:8024 (prog-if 10 [OHCI])
Subsystem: 1631:e011
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at f0006000 (32-bit, non-prefetchable) [size=2K]
Memory at f0000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
asoundconf list <RET>
Names of available sound cards:
Intel
SAA7134
cat /etc/asound.conf ~/.asoundrc* <RET>
cat: /etc/asound.conf: No such file or directory
cat: /root/.asoundrc*: No such file or directory
dmesg <RET>
eo capture interface: v2.00
[ 11.551306] agpgart: Detected an Intel 915G Chipset.
[ 11.586361] agpgart: AGP aperture is 256M @ 0x0
[ 11.587456] nvidia: module license 'NVIDIA' taints kernel.
[ 11.850684] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 11.850698] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 11.850895] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007
[ 11.922798] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 11.922868] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 11.922879] saa7133[0]: found at 0000:02:01.0, rev: 208, irq: 19, latency: 32, mmio: 0xf0004000
[ 11.922886] saa7133[0]: subsystem: 1043:4857, board: UNKNOWN/GENERIC [card=0,
[ 11.922894] saa7133[0]: board init: gpio is 0
[ 12.064394] saa7133[0]: i2c eeprom 00: 43 10 57 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 12.064412] saa7133[0]: i2c eeprom 10: 00 01 20 00 ff 20 ff ff ff ff ff ff ff ff ff ff
[ 12.064427] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 cb ff ff ff ff
[ 12.064442] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.064457] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 00 ff ff ff ff ff ff
[ 12.064473] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.064489] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.064503] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.064733] saa7133[0]: registered device video0 [v4l2]
[ 12.064762] saa7133[0]: registered device vbi0
[ 12.164162] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 12.164184] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 12.177747] saa7134 ALSA driver for DMA sound loaded
[ 12.177787] saa7133[0]/alsa: saa7133[0] at 0xf0004000 irq 19 registered as card -2
[ 12.353230] hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
[ 12.379868] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[ 12.382745] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0460)
[ 12.382784] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.405173] intel_rng: FWH not detected
[ 12.628014] fuse init (API version 7.8)
[ 12.649726] lp0: using parport0 (interrupt-driven).
[ 12.742993] Adding 979924k swap on /dev/disk/
[ 12.909031] EXT3 FS on sda1, internal journal
[ 13.135419] kjournald starting. Commit interval 5 seconds
[ 13.135651] EXT3 FS on sda6, internal journal
[ 13.135657] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.876323] NET: Registered protocol family 10
[ 14.876460] lo: Disabled Privacy Extensions
[ 19.800029] Using specific hotkey driver
[ 19.882016] ibm_acpi: ec object not found
[ 19.973734] No dock devices found.
[ 19.990951] input: Power Button (FF) as /class/input/input4
[ 19.990992] ACPI: Power Button (FF) [PWRF]
[ 19.991045] input: Power Button (CM) as /class/input/input5
[ 19.991070] ACPI: Power Button (CM) [PWRB]
[ 20.079099] pcc_acpi: loading...
[ 22.392195] ppdev: user-space parallel port driver
[ 24.501248] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 24.501255] apm: disabled - APM is not SMP safe.
[ 24.671585] Installing knfsd (copyright (C) 1996 <email address hidden>).
[ 24.767554] NFSD: Using /var/lib/
[ 24.767845] NFSD: starting 90-second grace period
[ 25.606552] Bluetooth: Core ver 2.11
[ 25.606621] NET: Registered protocol family 31
[ 25.606625] Bluetooth: HCI device and connection manager initialized
[ 25.606630] Bluetooth: HCI socket layer initialized
[ 25.624906] Bluetooth: L2CAP ver 2.8
[ 25.624912] Bluetooth: L2CAP socket layer initialized
[ 25.796116] Bluetooth: RFCOMM socket layer initialized
[ 25.796134] Bluetooth: RFCOMM TTY layer initialized
[ 25.796137] Bluetooth: RFCOMM ver 1.8
[ 27.497704] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 36.276218] eth0: no IPv6 routers present
[ 293.555753] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 294.117908] ACPI: PCI interrupt for device 0000:02:05.0 disabled
[ 295.751804] PM: Preparing system for mem sleep
[ 295.751811] Disabling non-boot CPUs ...
[ 295.775627] CPU 1 is now offline
[ 295.775634] SMP alternatives: switching to UP code
[ 295.776817] CPU1 is down
[ 295.776822] Stopping tasks ... done.
[ 295.867539] Suspending console(s)
[ 295.867546] platform bluetooth: suspend
[ 295.867556] iTCO_wdt iTCO_wdt: suspend
[ 295.867562] sd 1:0:1:0: suspend
[ 295.868079] sd 1:0:0:0: suspend
[ 296.577368] sr 0:0:0:0: suspend
[ 296.577387] usbdev5.1_ep81: PM: suspend 0->2, parent 5-0:1.0 already 2
[ 296.577389] hub 5-0:1.0: PM: suspend 2-->2
[ 296.577391] hub 5-0:1.0: PM: suspend 2->2, parent usb5 already 2
[ 296.577394] usbdev5.1_ep00: PM: suspend 0->2, parent usb5 already 2
[ 296.577396] usb usb5: PM: suspend 2-->2
[ 296.577398] usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2
[ 296.577400] hub 4-0:1.0: PM: suspend 2-->2
[ 296.577402] hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2
[ 296.577404] usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2
[ 296.577406] usb usb4: PM: suspend 2-->2
[ 296.577408] usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2
[ 296.577410] hub 3-0:1.0: PM: suspend 2-->2
[ 296.577411] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2
[ 296.577413] usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2
[ 296.577415] usb usb3: PM: suspend 2-->2
[ 296.577417] usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2
[ 296.577419] hub 2-0:1.0: PM: suspend 2-->2
[ 296.577421] hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2
[ 296.577423] usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2
[ 296.577425] usb usb2: PM: suspend 2-->2
[ 296.577427] usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2
[ 296.577429] hub 1-0:1.0: PM: suspend 2-->2
[ 296.577431] hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2
[ 296.577433] usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2
[ 296.577435] usb usb1: PM: suspend 2-->2
[ 296.577437] platform vesafb.0: suspend
[ 296.577439] platform eisa.0: suspend
[ 296.577441] i8042 i8042: suspend
[ 297.478311] serial8250 serial8250: suspend
[ 297.478397] pci_express 0000:00:
[ 297.478400] pcspkr pcspkr: suspend
[ 297.478407] pnp 00:0d: suspend
[ 297.478409] system 00:0c: suspend
[ 297.478411] system 00:0b: suspend
[ 297.478412] system 00:0a: suspend
[ 297.478414] i8042 kbd 00:09: suspend
[ 297.478415] i8042 aux 00:08: suspend
[ 297.478417] parport_pc 00:07: suspend
[ 297.478656] pnp: Device 00:07 disabled.
[ 297.478659] serial 00:06: suspend
[ 297.478847] pnp: Device 00:06 disabled.
[ 297.478849] pnp 00:05: suspend
[ 297.478851] pnp 00:04: suspend
[ 297.478852] pnp 00:03: suspend
[ 297.478854] pnp 00:02: suspend
[ 297.478855] system 00:01: suspend
[ 297.478857] pnp 00:00: suspend
[ 297.478859] ohci1394 0000:02:07.0: suspend
[ 297.478861] ohci1394 does not fully support suspend and resume yet
[ 297.493435] pci 0000:02:05.0: suspend
[ 297.493482] saa7134 0000:02:01.0: suspend
[ 297.493529] serial 0000:02:00.0: suspend
[ 297.509463] nvidia 0000:01:00.0: suspend
[ 297.509481] NVRM: RmPowerManagement: 3
[ 297.738102] pci 0000:00:1f.3: suspend
[ 297.738138] ata_piix 0000:00:1f.2: suspend
[ 297.739053] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 297.753000] pci 0000:00:1f.0: suspend
[ 297.753032] pci 0000:00:1e.0: suspend
[ 297.753070] ehci_hcd 0000:00:1d.7: suspend, may wakeup
[ 297.753123] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 297.769040] uhci_hcd 0000:00:1d.3: suspend
[ 297.769072] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 297.769074] uhci_hcd 0000:00:1d.2: suspend
[ 297.769105] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 297.769107] uhci_hcd 0000:00:1d.1: suspend
[ 297.769137] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 297.769139] uhci_hcd 0000:00:1d.0: suspend
[ 297.769170] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 297.769172] HDA Intel 0000:00:1b.0: suspend
[ 297.773060] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 297.789076] pcieport-driver 0000:00:01.0: suspend
[ 297.789123] agpgart-intel 0000:00:00.0: suspend
[ 297.789150] acpi acpi: suspend
[ 297.789159] PM: Entering mem sleep
[ 297.789161] platform bluetooth: LATE suspend
[ 297.789168] iTCO_wdt iTCO_wdt: LATE suspend
[ 297.789175] platform vesafb.0: LATE suspend
[ 297.789177] platform eisa.0: LATE suspend
[ 297.789179] i8042 i8042: LATE suspend
[ 297.789182] serial8250 serial8250: LATE suspend
[ 297.789261] pcspkr pcspkr: LATE suspend
[ 297.789266] ohci1394 0000:02:07.0: LATE suspend
[ 297.789268] pci 0000:02:05.0: LATE suspend
[ 297.789270] saa7134 0000:02:01.0: LATE suspend
[ 297.789271] serial 0000:02:00.0: LATE suspend
[ 297.789273] nvidia 0000:01:00.0: LATE suspend
[ 297.789275] pci 0000:00:1f.3: LATE suspend
[ 297.789276] pci 0000:00:1f.0: LATE suspend
[ 297.789278] pci 0000:00:1e.0: LATE suspend
[ 297.789279] HDA Intel 0000:00:1b.0: LATE suspend
[ 297.789281] pcieport-driver 0000:00:01.0: LATE suspend
[ 297.789282] agpgart-intel 0000:00:00.0: LATE suspend
[ 0.399166] Back to C!
[ 0.399449] agpgart-intel 0000:00:00.0: EARLY resume
[ 0.399453] pcieport-driver 0000:00:01.0: EARLY resume
[ 0.399455] HDA Intel 0000:00:1b.0: EARLY resume
[ 0.399457] uhci_hcd 0000:00:1d.0: EARLY resume
[ 0.399459] uhci_hcd 0000:00:1d.1: EARLY resume
[ 0.399461] uhci_hcd 0000:00:1d.2: EARLY resume
[ 0.399462] uhci_hcd 0000:00:1d.3: EARLY resume
[ 0.399464] ehci_hcd 0000:00:1d.7: EARLY resume
[ 0.399466] pci 0000:00:1e.0: EARLY resume
[ 0.399468] pci 0000:00:1f.0: EARLY resume
[ 0.399469] ata_piix 0000:00:1f.2: EARLY resume
[ 0.399471] pci 0000:00:1f.3: EARLY resume
[ 0.399473] nvidia 0000:01:00.0: EARLY resume
[ 0.399475] serial 0000:02:00.0: EARLY resume
[ 0.399477] saa7134 0000:02:01.0: EARLY resume
[ 0.399478] pci 0000:02:05.0: EARLY resume
[ 0.399480] ohci1394 0000:02:07.0: EARLY resume
[ 0.399485] pcspkr pcspkr: EARLY resume
[ 0.399552] serial8250 serial8250: EARLY resume
[ 0.399554] i8042 i8042: EARLY resume
[ 0.399556] platform eisa.0: EARLY resume
[ 0.399557] platform vesafb.0: EARLY resume
[ 0.399565] iTCO_wdt iTCO_wdt: EARLY resume
[ 0.399570] platform bluetooth: EARLY resume
[ 0.399572] PM: Finishing wakeup.
[ 0.399575] acpi acpi: resuming
[ 0.399584] agpgart-intel 0000:00:00.0: resuming
[ 0.399616] pcieport-driver 0000:00:01.0: resuming
[ 0.399633] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 200000f0)
[ 0.399656] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.399660] HDA Intel 0000:00:1b.0: resuming
[ 0.443385] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 105)
[ 0.443401] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing f0100004)
[ 0.443406] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 8)
[ 0.443411] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[ 0.443434] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.443441] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 0.500309] uhci_hcd 0000:00:1d.0: resuming
[ 0.500314] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 0.500321] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 0.500366] usb usb1: root hub lost power or was reset
[ 0.500380] uhci_hcd 0000:00:1d.1: resuming
[ 0.500384] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.500390] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 0.500432] usb usb2: root hub lost power or was reset
[ 0.500445] uhci_hcd 0000:00:1d.2: resuming
[ 0.500448] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 0.500455] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 0.500497] usb usb3: root hub lost power or was reset
[ 0.500510] uhci_hcd 0000:00:1d.3: resuming
[ 0.500513] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 0.500519] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 0.500561] usb usb4: root hub lost power or was reset
[ 0.500575] ehci_hcd 0000:00:1d.7: resuming
[ 0.516339] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 0.516346] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 0.516397] pci 0000:00:1e.0: resuming
[ 0.516438] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.516441] pci 0000:00:1f.0: resuming
[ 0.516471] ata_piix 0000:00:1f.2: resuming
[ 0.532386] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005)
[ 0.532403] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.532409] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 0.533572] pci 0000:00:1f.3: resuming
[ 0.533603] nvidia 0000:01:00.0: resuming
[ 0.533612] NVRM: RmPowerManagement: 4
[ 0.678522] serial 0000:02:00.0: resuming
[ 0.692218] PM: Writing back config space on device 0000:02:00.0 at offset f (was 3e010100, writing 3e010103)
[ 0.692237] PM: Writing back config space on device 0000:02:00.0 at offset 5 (was 1, writing a001)
[ 0.692242] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 0, writing f0007000)
[ 0.692248] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 0.692254] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2900080, writing 2900087)
[ 0.692275] saa7134 0000:02:01.0: resuming
[ 0.692286] PM: Writing back config space on device 0000:02:01.0 at offset f (was 20540100, writing 2054010b)
[ 0.692305] PM: Writing back config space on device 0000:02:01.0 at offset 4 (was 0, writing f0004000)
[ 0.692310] PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 2000)
[ 0.692316] PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2900000, writing 2900006)
[ 0.692345] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 0.692352] pci 0000:02:05.0: resuming
[ 0.692375] PM: Writing back config space on device 0000:02:05.0 at offset 5 (was 0, writing f0005000)
[ 0.692380] PM: Writing back config space on device 0000:02:05.0 at offset 4 (was 1, writing a401)
[ 0.692385] PM: Writing back config space on device 0000:02:05.0 at offset 3 (was 0, writing 2000)
[ 0.692392] PM: Writing back config space on device 0000:02:05.0 at offset 1 (was 2900000, writing 2900003)
[ 0.692408] ohci1394 0000:02:07.0: resuming
[ 0.708243] PM: Writing back config space on device 0000:02:07.0 at offset f (was 4020100, writing 4020109)
[ 0.708262] PM: Writing back config space on device 0000:02:07.0 at offset 5 (was 0, writing f0000000)
[ 0.708267] PM: Writing back config space on device 0000:02:07.0 at offset 4 (was 0, writing f0006000)
[ 0.708272] PM: Writing back config space on device 0000:02:07.0 at offset 3 (was 0, writing 2008)
[ 0.708279] PM: Writing back config space on device 0000:02:07.0 at offset 1 (was 2100000, writing 2100006)
[ 0.757857] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f0006000-
[ 0.757878] pnp 00:00: resuming
[ 0.757880] system 00:01: resuming
[ 0.757881] pnp 00:02: resuming
[ 0.757883] pnp 00:03: resuming
[ 0.757884] pnp 00:04: resuming
[ 0.757885] pnp 00:05: resuming
[ 0.757887] serial 00:06: resuming
[ 0.758720] pnp: Device 00:06 activated.
[ 0.758724] parport_pc 00:07: resuming
[ 0.759773] pnp: Device 00:07 activated.
[ 0.759775] i8042 aux 00:08: resuming
[ 0.759895] pnp: Failed to activate device 00:08.
[ 0.759898] i8042 kbd 00:09: resuming
[ 0.759906] pnp: Failed to activate device 00:09.
[ 0.759908] system 00:0a: resuming
[ 0.759909] system 00:0b: resuming
[ 0.759911] system 00:0c: resuming
[ 0.759912] pnp 00:0d: resuming
[ 0.759915] pcspkr pcspkr: resuming
[ 0.759918] pci_express 0000:00:
[ 0.760010] serial8250 serial8250: resuming
[ 0.760014] i8042 i8042: resuming
[ 0.760444] atkbd serio0: resuming
[ 0.799760] platform eisa.0: resuming
[ 0.799762] psmouse serio1: resuming
[ 1.535380] platform vesafb.0: resuming
[ 1.535382] usb usb1: resuming
[ 1.574604] usb usb2: resuming
[ 1.614675] usb usb3: resuming
[ 1.654747] usb usb4: resuming
[ 1.694820] usbdev5.1_ep00: PM: resume from 0, parent usb5 still 2
[ 1.694823] usbdev5.1_ep81: PM: resume from 0, parent 5-0:1.0 still 2
[ 1.694826] sr 0:0:0:0: resuming
[ 1.694833] sd 1:0:0:0: resuming
[ 1.697882] sd 1:0:1:0: resuming
[ 1.697889] iTCO_wdt iTCO_wdt: resuming
[ 1.697897] platform bluetooth: resuming
[ 1.698068] Restarting tasks ... <6>ata1: EH pending after completion, repeating EH (cnt=4)
[ 1.782764] ata1: soft resetting port
[ 1.831142] done.
[ 1.831189] Enabling non-boot CPUs ...
[ 1.854558] SMP alternatives: switching to SMP code
[ 1.854760] Booting processor 1/1 eip 3000
[ 1.865044] Initializing CPU#1
[ 1.943783] Calibrating delay using timer specific routine.. 6134.52 BogoMIPS (lpj=12269042)
[ 1.943793] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
[ 1.943800] monitor/mwait feature present.
[ 1.943806] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 1.943809] CPU: L2 cache: 1024K
[ 1.943811] CPU: Physical Processor ID: 0
[ 1.943813] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000651d 00000000 00000001
[ 1.944083] CPU1: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09
[ 1.948162] CPU1 is up
[ 2.275283] ata1.00: configured for UDMA/33
[ 2.275294] ata1: EH complete
[ 8.001763] ata2: soft resetting port
[ 8.275061] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.406198] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.406207] ata2.00: configured for UDMA/133
[ 8.406213] ata2: EH pending after completion, repeating EH (cnt=4)
[ 8.406239] ata2: soft resetting port
[ 8.683291] ata2.01: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
[ 8.691259] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.711354] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.711361] ata2.00: configured for UDMA/133
[ 8.719461] ata2.01: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
[ 8.719468] ata2.01: configured for UDMA/133
[ 8.719473] ata2: EH complete
[ 8.740229] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 8.740648] sda: Write Protect is off
[ 8.740654] sda: Mode Sense: 00 3a 00 00
[ 8.741240] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.741529] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
[ 8.741713] sdb: Write Protect is off
[ 8.741718] sdb: Mode Sense: 00 3a 00 00
[ 8.742054] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.742411] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 8.742837] sda: Write Protect is off
[ 8.742842] sda: Mode Sense: 00 3a 00 00
[ 8.743509] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.751780] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
[ 8.755713] sdb: Write Protect is off
[ 8.755717] sdb: Mode Sense: 00 3a 00 00
[ 8.771980] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.827643] 8139too Fast Ethernet driver 0.9.28
[ 9.827841] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 9.828871] eth0: RealTek RTL8139 at 0xf8b48000, 00:14:85:72:6e:62, IRQ 21
[ 9.828877] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 9.854884] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 9.989704] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 10.718480] input: Power Button (FF) as /class/input/input6
[ 10.718683] ACPI: Power Button (FF) [PWRF]
[ 10.719106] input: Power Button (CM) as /class/input/input7
[ 10.719295] ACPI: Power Button (CM) [PWRB]
[ 11.868160] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 11.868509] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 68.939533] eth0: no IPv6 routers present
[ 5907.386009] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 5907.695938] ACPI: PCI interrupt for device 0000:02:05.0 disabled
[ 5909.530723] PM: Preparing system for mem sleep
[ 5909.530730] Disabling non-boot CPUs ...
[ 5909.556647] CPU 1 is now offline
[ 5909.556653] SMP alternatives: switching to UP code
[ 5909.557828] CPU1 is down
[ 5909.557832] Stopping tasks ... done.
[ 5909.585800] Suspending console(s)
[ 5909.585807] platform bluetooth: suspend
[ 5909.585817] iTCO_wdt iTCO_wdt: suspend
[ 5909.585823] sd 1:0:1:0: suspend
[ 5909.586327] sd 1:0:0:0: suspend
[ 5910.253705] sr 0:0:0:0: suspend
[ 5910.253722] usbdev5.1_ep81: PM: suspend 0->2, parent 5-0:1.0 already 2
[ 5910.253725] hub 5-0:1.0: PM: suspend 2-->2
[ 5910.253727] hub 5-0:1.0: PM: suspend 2->2, parent usb5 already 2
[ 5910.253730] usbdev5.1_ep00: PM: suspend 0->2, parent usb5 already 2
[ 5910.253732] usb usb5: PM: suspend 2-->2
[ 5910.253734] usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2
[ 5910.253736] hub 4-0:1.0: PM: suspend 2-->2
[ 5910.253738] hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2
[ 5910.253740] usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2
[ 5910.253742] usb usb4: PM: suspend 2-->2
[ 5910.253744] usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2
[ 5910.253746] hub 3-0:1.0: PM: suspend 2-->2
[ 5910.253748] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2
[ 5910.253750] usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2
[ 5910.253752] usb usb3: PM: suspend 2-->2
[ 5910.253754] usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2
[ 5910.253756] hub 2-0:1.0: PM: suspend 2-->2
[ 5910.253758] hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2
[ 5910.253760] usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2
[ 5910.253762] usb usb2: PM: suspend 2-->2
[ 5910.253765] usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2
[ 5910.253766] hub 1-0:1.0: PM: suspend 2-->2
[ 5910.253768] hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2
[ 5910.253770] usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2
[ 5910.253772] usb usb1: PM: suspend 2-->2
[ 5910.253774] platform vesafb.0: suspend
[ 5910.253776] platform eisa.0: suspend
[ 5910.253778] i8042 i8042: suspend
[ 5911.155581] serial8250 serial8250: suspend
[ 5911.155670] pci_express 0000:00:
[ 5911.155673] pcspkr pcspkr: suspend
[ 5911.155680] pnp 00:0d: suspend
[ 5911.155682] system 00:0c: suspend
[ 5911.155683] system 00:0b: suspend
[ 5911.155685] system 00:0a: suspend
[ 5911.155686] i8042 kbd 00:09: suspend
[ 5911.155688] i8042 aux 00:08: suspend
[ 5911.155690] parport_pc 00:07: suspend
[ 5911.155926] pnp: Device 00:07 disabled.
[ 5911.155928] serial 00:06: suspend
[ 5911.156119] pnp: Device 00:06 disabled.
[ 5911.156121] pnp 00:05: suspend
[ 5911.156123] pnp 00:04: suspend
[ 5911.156124] pnp 00:03: suspend
[ 5911.156126] pnp 00:02: suspend
[ 5911.156127] system 00:01: suspend
[ 5911.156129] pnp 00:00: suspend
[ 5911.156131] ohci1394 0000:02:07.0: suspend
[ 5911.156133] ohci1394 does not fully support suspend and resume yet
[ 5911.156135] ieee1394: hpsb_bus_reset called while bus reset already in progress
[ 5911.169633] pci 0000:02:05.0: suspend
[ 5911.169681] saa7134 0000:02:01.0: suspend
[ 5911.169727] serial 0000:02:00.0: suspend
[ 5911.185662] nvidia 0000:01:00.0: suspend
[ 5911.185680] NVRM: RmPowerManagement: 3
[ 5911.412930] pci 0000:00:1f.3: suspend
[ 5911.412967] ata_piix 0000:00:1f.2: suspend
[ 5911.413856] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 5911.433194] pci 0000:00:1f.0: suspend
[ 5911.433227] pci 0000:00:1e.0: suspend
[ 5911.433264] ehci_hcd 0000:00:1d.7: suspend, may wakeup
[ 5911.433327] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 5911.449239] uhci_hcd 0000:00:1d.3: suspend
[ 5911.449271] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 5911.449273] uhci_hcd 0000:00:1d.2: suspend
[ 5911.449304] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 5911.449305] uhci_hcd 0000:00:1d.1: suspend
[ 5911.449336] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 5911.449338] uhci_hcd 0000:00:1d.0: suspend
[ 5911.449368] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 5911.449371] HDA Intel 0000:00:1b.0: suspend
[ 5911.453258] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 5911.469274] pcieport-driver 0000:00:01.0: suspend
[ 5911.469322] agpgart-intel 0000:00:00.0: suspend
[ 5911.469348] acpi acpi: suspend
[ 5911.469358] PM: Entering mem sleep
[ 5911.469360] platform bluetooth: LATE suspend
[ 5911.469367] iTCO_wdt iTCO_wdt: LATE suspend
[ 5911.469374] platform vesafb.0: LATE suspend
[ 5911.469376] platform eisa.0: LATE suspend
[ 5911.469378] i8042 i8042: LATE suspend
[ 5911.469381] serial8250 serial8250: LATE suspend
[ 5911.469460] pcspkr pcspkr: LATE suspend
[ 5911.469465] ohci1394 0000:02:07.0: LATE suspend
[ 5911.469467] pci 0000:02:05.0: LATE suspend
[ 5911.469469] saa7134 0000:02:01.0: LATE suspend
[ 5911.469471] serial 0000:02:00.0: LATE suspend
[ 5911.469473] nvidia 0000:01:00.0: LATE suspend
[ 5911.469474] pci 0000:00:1f.3: LATE suspend
[ 5911.469476] pci 0000:00:1f.0: LATE suspend
[ 5911.469477] pci 0000:00:1e.0: LATE suspend
[ 5911.469479] HDA Intel 0000:00:1b.0: LATE suspend
[ 5911.469481] pcieport-driver 0000:00:01.0: LATE suspend
[ 5911.469482] agpgart-intel 0000:00:00.0: LATE suspend
[ 0.399031] Back to C!
[ 0.399314] agpgart-intel 0000:00:00.0: EARLY resume
[ 0.399317] pcieport-driver 0000:00:01.0: EARLY resume
[ 0.399320] HDA Intel 0000:00:1b.0: EARLY resume
[ 0.399322] uhci_hcd 0000:00:1d.0: EARLY resume
[ 0.399323] uhci_hcd 0000:00:1d.1: EARLY resume
[ 0.399325] uhci_hcd 0000:00:1d.2: EARLY resume
[ 0.399326] uhci_hcd 0000:00:1d.3: EARLY resume
[ 0.399328] ehci_hcd 0000:00:1d.7: EARLY resume
[ 0.399330] pci 0000:00:1e.0: EARLY resume
[ 0.399332] pci 0000:00:1f.0: EARLY resume
[ 0.399334] ata_piix 0000:00:1f.2: EARLY resume
[ 0.399335] pci 0000:00:1f.3: EARLY resume
[ 0.399337] nvidia 0000:01:00.0: EARLY resume
[ 0.399339] serial 0000:02:00.0: EARLY resume
[ 0.399341] saa7134 0000:02:01.0: EARLY resume
[ 0.399343] pci 0000:02:05.0: EARLY resume
[ 0.399344] ohci1394 0000:02:07.0: EARLY resume
[ 0.399349] pcspkr pcspkr: EARLY resume
[ 0.399416] serial8250 serial8250: EARLY resume
[ 0.399418] i8042 i8042: EARLY resume
[ 0.399420] platform eisa.0: EARLY resume
[ 0.399421] platform vesafb.0: EARLY resume
[ 0.399428] iTCO_wdt iTCO_wdt: EARLY resume
[ 0.399434] platform bluetooth: EARLY resume
[ 0.399435] PM: Finishing wakeup.
[ 0.399439] acpi acpi: resuming
[ 0.399447] agpgart-intel 0000:00:00.0: resuming
[ 0.399480] pcieport-driver 0000:00:01.0: resuming
[ 0.399496] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 200000f0)
[ 0.399520] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.399524] HDA Intel 0000:00:1b.0: resuming
[ 0.439245] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 105)
[ 0.439262] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing f0100004)
[ 0.439266] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 8)
[ 0.439272] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[ 0.439295] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.439302] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 0.496153] uhci_hcd 0000:00:1d.0: resuming
[ 0.496158] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 0.496164] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 0.496209] usb usb1: root hub lost power or was reset
[ 0.496225] uhci_hcd 0000:00:1d.1: resuming
[ 0.496228] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.496234] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 0.496277] usb usb2: root hub lost power or was reset
[ 0.496290] uhci_hcd 0000:00:1d.2: resuming
[ 0.496293] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 0.496299] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 0.496341] usb usb3: root hub lost power or was reset
[ 0.496355] uhci_hcd 0000:00:1d.3: resuming
[ 0.496358] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 0.496363] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 0.496406] usb usb4: root hub lost power or was reset
[ 0.496419] ehci_hcd 0000:00:1d.7: resuming
[ 0.512180] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 0.512187] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 0.512237] pci 0000:00:1e.0: resuming
[ 0.512278] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.512281] pci 0000:00:1f.0: resuming
[ 0.512310] ata_piix 0000:00:1f.2: resuming
[ 0.528228] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005)
[ 0.528245] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.528250] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 0.529393] pci 0000:00:1f.3: resuming
[ 0.529424] nvidia 0000:01:00.0: resuming
[ 0.529433] NVRM: RmPowerManagement: 4
[ 0.673381] serial 0000:02:00.0: resuming
[ 0.688073] PM: Writing back config space on device 0000:02:00.0 at offset f (was 3e010100, writing 3e010103)
[ 0.688093] PM: Writing back config space on device 0000:02:00.0 at offset 5 (was 1, writing a001)
[ 0.688098] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 0, writing f0007000)
[ 0.688103] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 0.688110] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2900080, writing 2900087)
[ 0.688131] saa7134 0000:02:01.0: resuming
[ 0.688140] PM: Writing back config space on device 0000:02:01.0 at offset f (was 20540100, writing 2054010b)
[ 0.688159] PM: Writing back config space on device 0000:02:01.0 at offset 4 (was 0, writing f0004000)
[ 0.688164] PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 2000)
[ 0.688171] PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2900000, writing 2900006)
[ 0.688199] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 0.688206] pci 0000:02:05.0: resuming
[ 0.688229] PM: Writing back config space on device 0000:02:05.0 at offset 5 (was 0, writing f0005000)
[ 0.688234] PM: Writing back config space on device 0000:02:05.0 at offset 4 (was 1, writing a401)
[ 0.688239] PM: Writing back config space on device 0000:02:05.0 at offset 3 (was 0, writing 2000)
[ 0.688246] PM: Writing back config space on device 0000:02:05.0 at offset 1 (was 2900000, writing 2900003)
[ 0.688262] ohci1394 0000:02:07.0: resuming
[ 0.704101] PM: Writing back config space on device 0000:02:07.0 at offset f (was 4020100, writing 4020109)
[ 0.704119] PM: Writing back config space on device 0000:02:07.0 at offset 5 (was 0, writing f0000000)
[ 0.704124] PM: Writing back config space on device 0000:02:07.0 at offset 4 (was 0, writing f0006000)
[ 0.704129] PM: Writing back config space on device 0000:02:07.0 at offset 3 (was 0, writing 2008)
[ 0.704136] PM: Writing back config space on device 0000:02:07.0 at offset 1 (was 2100000, writing 2100006)
[ 0.753714] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f0006000-
[ 0.753736] pnp 00:00: resuming
[ 0.753738] system 00:01: resuming
[ 0.753739] pnp 00:02: resuming
[ 0.753741] pnp 00:03: resuming
[ 0.753742] pnp 00:04: resuming
[ 0.753744] pnp 00:05: resuming
[ 0.753745] serial 00:06: resuming
[ 0.754570] pnp: Device 00:06 activated.
[ 0.754574] parport_pc 00:07: resuming
[ 0.755615] pnp: Device 00:07 activated.
[ 0.755617] i8042 aux 00:08: resuming
[ 0.755739] pnp: Failed to activate device 00:08.
[ 0.755742] i8042 kbd 00:09: resuming
[ 0.755752] pnp: Failed to activate device 00:09.
[ 0.755755] system 00:0a: resuming
[ 0.755756] system 00:0b: resuming
[ 0.755757] system 00:0c: resuming
[ 0.755758] pnp 00:0d: resuming
[ 0.755762] pcspkr pcspkr: resuming
[ 0.755764] pci_express 0000:00:
[ 0.755855] serial8250 serial8250: resuming
[ 0.755860] i8042 i8042: resuming
[ 0.756389] atkbd serio0: resuming
[ 0.794313] platform eisa.0: resuming
[ 0.794315] psmouse serio1: resuming
[ 1.529897] platform vesafb.0: resuming
[ 1.529899] usb usb1: resuming
[ 1.570406] usb usb2: resuming
[ 1.610477] usb usb3: resuming
[ 1.650549] usb usb4: resuming
[ 1.690622] usbdev5.1_ep00: PM: resume from 0, parent usb5 still 2
[ 1.690625] usbdev5.1_ep81: PM: resume from 0, parent 5-0:1.0 still 2
[ 1.690629] sr 0:0:0:0: resuming
[ 1.690635] sd 1:0:0:0: resuming
[ 1.693684] sd 1:0:1:0: resuming
[ 1.693692] iTCO_wdt iTCO_wdt: resuming
[ 1.693700] platform bluetooth: resuming
[ 1.693955] Restarting tasks ... <6>ata1: EH pending after completion, repeating EH (cnt=4)
[ 1.694726] ata1: soft resetting port
[ 1.734738] done.
[ 1.734785] Enabling non-boot CPUs ...
[ 1.750671] SMP alternatives: switching to SMP code
[ 1.750866] Booting processor 1/1 eip 3000
[ 1.761150] Initializing CPU#1
[ 1.839611] Calibrating delay using timer specific routine.. 6134.77 BogoMIPS (lpj=12269550)
[ 1.839621] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
[ 1.839628] monitor/mwait feature present.
[ 1.839630] using mwait in idle threads.
[ 1.839636] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 1.839639] CPU: L2 cache: 1024K
[ 1.839641] CPU: Physical Processor ID: 0
[ 1.839643] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000651d 00000000 00000001
[ 1.839914] CPU1: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09
[ 1.868204] CPU1 is up
[ 2.179254] ata1.00: configured for UDMA/33
[ 2.179265] ata1: EH complete
[ 2.508006] 8139too Fast Ethernet driver 0.9.28
[ 2.508489] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 2.510276] eth0: RealTek RTL8139 at 0xf8836000, 00:14:85:72:6e:62, IRQ 21
[ 2.510285] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 2.525295] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 2.716019] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 2.849805] input: Power Button (FF) as /class/input/input8
[ 2.850149] ACPI: Power Button (FF) [PWRF]
[ 2.850399] input: Power Button (CM) as /class/input/input9
[ 2.850654] ACPI: Power Button (CM) [PWRB]
[ 3.885731] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 3.885915] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 8.004451] ata2: soft resetting port
[ 8.285928] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.409140] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.409150] ata2.00: configured for UDMA/133
[ 8.409157] ata2: EH pending after completion, repeating EH (cnt=4)
[ 8.409182] ata2: soft resetting port
[ 8.686471] ata2.01: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
[ 8.694441] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.710540] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.710548] ata2.00: configured for UDMA/133
[ 8.718650] ata2.01: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
[ 8.718655] ata2.01: configured for UDMA/133
[ 8.718662] ata2: EH complete
[ 8.718877] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 8.719037] sda: Write Protect is off
[ 8.719042] sda: Mode Sense: 00 3a 00 00
[ 8.719344] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.719753] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
[ 8.719885] sdb: Write Protect is off
[ 8.719889] sdb: Mode Sense: 00 3a 00 00
[ 8.720204] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.720661] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 8.721787] sda: Write Protect is off
[ 8.721792] sda: Mode Sense: 00 3a 00 00
[ 8.722202] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.722463] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
[ 8.722649] sdb: Write Protect is off
[ 8.722653] sdb: Mode Sense: 00 3a 00 00
[ 8.722901] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 61.475777] eth0: no IPv6 routers present
[ 914.891483] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 915.188877] ACPI: PCI interrupt for device 0000:02:05.0 disabled
[ 916.737885] PM: Preparing system for mem sleep
[ 916.737893] Disabling non-boot CPUs ...
[ 916.756657] CPU 1 is now offline
[ 916.756664] SMP alternatives: switching to UP code
[ 916.757872] CPU1 is down
[ 916.757876] Stopping tasks ... done.
[ 916.790445] Suspending console(s)
[ 916.790452] platform bluetooth: suspend
[ 916.790462] iTCO_wdt iTCO_wdt: suspend
[ 916.790468] sd 1:0:1:0: suspend
[ 916.790984] sd 1:0:0:0: suspend
[ 917.567008] sr 0:0:0:0: suspend
[ 917.567025] usbdev5.1_ep81: PM: suspend 0->2, parent 5-0:1.0 already 2
[ 917.567028] hub 5-0:1.0: PM: suspend 2-->2
[ 917.567030] hub 5-0:1.0: PM: suspend 2->2, parent usb5 already 2
[ 917.567032] usbdev5.1_ep00: PM: suspend 0->2, parent usb5 already 2
[ 917.567034] usb usb5: PM: suspend 2-->2
[ 917.567037] usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2
[ 917.567038] hub 4-0:1.0: PM: suspend 2-->2
[ 917.567040] hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2
[ 917.567042] usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2
[ 917.567044] usb usb4: PM: suspend 2-->2
[ 917.567046] usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2
[ 917.567048] hub 3-0:1.0: PM: suspend 2-->2
[ 917.567050] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2
[ 917.567052] usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2
[ 917.567054] usb usb3: PM: suspend 2-->2
[ 917.567056] usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2
[ 917.567058] hub 2-0:1.0: PM: suspend 2-->2
[ 917.567059] hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2
[ 917.567062] usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2
[ 917.567063] usb usb2: PM: suspend 2-->2
[ 917.567066] usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2
[ 917.567067] hub 1-0:1.0: PM: suspend 2-->2
[ 917.567069] hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2
[ 917.567071] usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2
[ 917.567073] usb usb1: PM: suspend 2-->2
[ 917.567075] platform vesafb.0: suspend
[ 917.567077] platform eisa.0: suspend
[ 917.567079] i8042 i8042: suspend
[ 918.468087] serial8250 serial8250: suspend
[ 918.468174] pci_express 0000:00:
[ 918.468176] pcspkr pcspkr: suspend
[ 918.468183] pnp 00:0d: suspend
[ 918.468185] system 00:0c: suspend
[ 918.468187] system 00:0b: suspend
[ 918.468188] system 00:0a: suspend
[ 918.468190] i8042 kbd 00:09: suspend
[ 918.468191] i8042 aux 00:08: suspend
[ 918.468193] parport_pc 00:07: suspend
[ 918.468427] pnp: Device 00:07 disabled.
[ 918.468429] serial 00:06: suspend
[ 918.468620] pnp: Device 00:06 disabled.
[ 918.468622] pnp 00:05: suspend
[ 918.468623] pnp 00:04: suspend
[ 918.468625] pnp 00:03: suspend
[ 918.468626] pnp 00:02: suspend
[ 918.468628] system 00:01: suspend
[ 918.468629] pnp 00:00: suspend
[ 918.468631] ohci1394 0000:02:07.0: suspend
[ 918.468633] ohci1394 does not fully support suspend and resume yet
[ 918.468636] ieee1394: hpsb_bus_reset called while bus reset already in progress
[ 918.486171] pci 0000:02:05.0: suspend
[ 918.486219] saa7134 0000:02:01.0: suspend
[ 918.486265] serial 0000:02:00.0: suspend
[ 918.502200] nvidia 0000:01:00.0: suspend
[ 918.502219] NVRM: RmPowerManagement: 3
[ 918.730017] pci 0000:00:1f.3: suspend
[ 918.730054] ata_piix 0000:00:1f.2: suspend
[ 918.730932] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 918.745733] pci 0000:00:1f.0: suspend
[ 918.745766] pci 0000:00:1e.0: suspend
[ 918.745803] ehci_hcd 0000:00:1d.7: suspend, may wakeup
[ 918.745866] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 918.761778] uhci_hcd 0000:00:1d.3: suspend
[ 918.761811] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 918.761813] uhci_hcd 0000:00:1d.2: suspend
[ 918.761844] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 918.761846] uhci_hcd 0000:00:1d.1: suspend
[ 918.761876] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 918.761878] uhci_hcd 0000:00:1d.0: suspend
[ 918.761908] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 918.761911] HDA Intel 0000:00:1b.0: suspend
[ 918.765796] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 918.781813] pcieport-driver 0000:00:01.0: suspend
[ 918.781861] agpgart-intel 0000:00:00.0: suspend
[ 918.781887] acpi acpi: suspend
[ 918.781897] PM: Entering mem sleep
[ 918.781899] platform bluetooth: LATE suspend
[ 918.781906] iTCO_wdt iTCO_wdt: LATE suspend
[ 918.781913] platform vesafb.0: LATE suspend
[ 918.781915] platform eisa.0: LATE suspend
[ 918.781917] i8042 i8042: LATE suspend
[ 918.781920] serial8250 serial8250: LATE suspend
[ 918.782001] pcspkr pcspkr: LATE suspend
[ 918.782006] ohci1394 0000:02:07.0: LATE suspend
[ 918.782008] pci 0000:02:05.0: LATE suspend
[ 918.782010] saa7134 0000:02:01.0: LATE suspend
[ 918.782012] serial 0000:02:00.0: LATE suspend
[ 918.782014] nvidia 0000:01:00.0: LATE suspend
[ 918.782015] pci 0000:00:1f.3: LATE suspend
[ 918.782017] pci 0000:00:1f.0: LATE suspend
[ 918.782018] pci 0000:00:1e.0: LATE suspend
[ 918.782020] HDA Intel 0000:00:1b.0: LATE suspend
[ 918.782021] pcieport-driver 0000:00:01.0: LATE suspend
[ 918.782023] agpgart-intel 0000:00:00.0: LATE suspend
[ 0.399004] Back to C!
[ 0.399287] agpgart-intel 0000:00:00.0: EARLY resume
[ 0.399291] pcieport-driver 0000:00:01.0: EARLY resume
[ 0.399293] HDA Intel 0000:00:1b.0: EARLY resume
[ 0.399295] uhci_hcd 0000:00:1d.0: EARLY resume
[ 0.399297] uhci_hcd 0000:00:1d.1: EARLY resume
[ 0.399299] uhci_hcd 0000:00:1d.2: EARLY resume
[ 0.399300] uhci_hcd 0000:00:1d.3: EARLY resume
[ 0.399302] ehci_hcd 0000:00:1d.7: EARLY resume
[ 0.399304] pci 0000:00:1e.0: EARLY resume
[ 0.399305] pci 0000:00:1f.0: EARLY resume
[ 0.399307] ata_piix 0000:00:1f.2: EARLY resume
[ 0.399309] pci 0000:00:1f.3: EARLY resume
[ 0.399311] nvidia 0000:01:00.0: EARLY resume
[ 0.399313] serial 0000:02:00.0: EARLY resume
[ 0.399315] saa7134 0000:02:01.0: EARLY resume
[ 0.399316] pci 0000:02:05.0: EARLY resume
[ 0.399318] ohci1394 0000:02:07.0: EARLY resume
[ 0.399323] pcspkr pcspkr: EARLY resume
[ 0.399389] serial8250 serial8250: EARLY resume
[ 0.399391] i8042 i8042: EARLY resume
[ 0.399393] platform eisa.0: EARLY resume
[ 0.399395] platform vesafb.0: EARLY resume
[ 0.399402] iTCO_wdt iTCO_wdt: EARLY resume
[ 0.399407] platform bluetooth: EARLY resume
[ 0.399409] PM: Finishing wakeup.
[ 0.399412] acpi acpi: resuming
[ 0.399421] agpgart-intel 0000:00:00.0: resuming
[ 0.399453] pcieport-driver 0000:00:01.0: resuming
[ 0.399470] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 200000f0)
[ 0.399493] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.399497] HDA Intel 0000:00:1b.0: resuming
[ 0.479145] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 105)
[ 0.479162] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing f0100004)
[ 0.479166] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 8)
[ 0.479172] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[ 0.479195] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.479202] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 0.536068] uhci_hcd 0000:00:1d.0: resuming
[ 0.536073] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 0.536080] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 0.536124] usb usb1: root hub lost power or was reset
[ 0.536139] uhci_hcd 0000:00:1d.1: resuming
[ 0.536143] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.536150] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 0.536192] usb usb2: root hub lost power or was reset
[ 0.536205] uhci_hcd 0000:00:1d.2: resuming
[ 0.536208] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 0.536214] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 0.536257] usb usb3: root hub lost power or was reset
[ 0.536270] uhci_hcd 0000:00:1d.3: resuming
[ 0.536273] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 0.536279] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 0.536321] usb usb4: root hub lost power or was reset
[ 0.536334] ehci_hcd 0000:00:1d.7: resuming
[ 0.552101] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 0.552109] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 0.552159] pci 0000:00:1e.0: resuming
[ 0.552200] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.552203] pci 0000:00:1f.0: resuming
[ 0.552233] ata_piix 0000:00:1f.2: resuming
[ 0.568146] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005)
[ 0.568162] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.568168] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 0.569312] pci 0000:00:1f.3: resuming
[ 0.569343] nvidia 0000:01:00.0: resuming
[ 0.569353] NVRM: RmPowerManagement: 4
[ 0.713649] serial 0000:02:00.0: resuming
[ 0.727991] PM: Writing back config space on device 0000:02:00.0 at offset f (was 3e010100, writing 3e010103)
[ 0.728011] PM: Writing back config space on device 0000:02:00.0 at offset 5 (was 1, writing a001)
[ 0.728016] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 0, writing f0007000)
[ 0.728022] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 0.728028] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2900080, writing 2900087)
[ 0.728049] saa7134 0000:02:01.0: resuming
[ 0.728058] PM: Writing back config space on device 0000:02:01.0 at offset f (was 20540100, writing 2054010b)
[ 0.728077] PM: Writing back config space on device 0000:02:01.0 at offset 4 (was 0, writing f0004000)
[ 0.728082] PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 2000)
[ 0.728089] PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2900000, writing 2900006)
[ 0.728118] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 0.728125] pci 0000:02:05.0: resuming
[ 0.728147] PM: Writing back config space on device 0000:02:05.0 at offset 5 (was 0, writing f0005000)
[ 0.728152] PM: Writing back config space on device 0000:02:05.0 at offset 4 (was 1, writing a401)
[ 0.728157] PM: Writing back config space on device 0000:02:05.0 at offset 3 (was 0, writing 2000)
[ 0.728164] PM: Writing back config space on device 0000:02:05.0 at offset 1 (was 2900000, writing 2900003)
[ 0.728180] ohci1394 0000:02:07.0: resuming
[ 0.744019] PM: Writing back config space on device 0000:02:07.0 at offset f (was 4020100, writing 4020109)
[ 0.744037] PM: Writing back config space on device 0000:02:07.0 at offset 5 (was 0, writing f0000000)
[ 0.744043] PM: Writing back config space on device 0000:02:07.0 at offset 4 (was 0, writing f0006000)
[ 0.744048] PM: Writing back config space on device 0000:02:07.0 at offset 3 (was 0, writing 2008)
[ 0.744054] PM: Writing back config space on device 0000:02:07.0 at offset 1 (was 2100000, writing 2100006)
[ 0.793632] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f0006000-
[ 0.793654] pnp 00:00: resuming
[ 0.793656] system 00:01: resuming
[ 0.793658] pnp 00:02: resuming
[ 0.793659] pnp 00:03: resuming
[ 0.793661] pnp 00:04: resuming
[ 0.793662] pnp 00:05: resuming
[ 0.793663] serial 00:06: resuming
[ 0.794494] pnp: Device 00:06 activated.
[ 0.794498] parport_pc 00:07: resuming
[ 0.795549] pnp: Device 00:07 activated.
[ 0.795552] i8042 aux 00:08: resuming
[ 0.795673] pnp: Failed to activate device 00:08.
[ 0.795675] i8042 kbd 00:09: resuming
[ 0.795684] pnp: Failed to activate device 00:09.
[ 0.795685] system 00:0a: resuming
[ 0.795687] system 00:0b: resuming
[ 0.795688] system 00:0c: resuming
[ 0.795689] pnp 00:0d: resuming
[ 0.795693] pcspkr pcspkr: resuming
[ 0.795696] pci_express 0000:00:
[ 0.795788] serial8250 serial8250: resuming
[ 0.795792] i8042 i8042: resuming
[ 0.796321] atkbd serio0: resuming
[ 0.835395] platform eisa.0: resuming
[ 0.835397] psmouse serio1: resuming
[ 1.571042] platform vesafb.0: resuming
[ 1.571044] usb usb1: resuming
[ 1.610388] usb usb2: resuming
[ 1.650459] usb usb3: resuming
[ 1.690531] usb usb4: resuming
[ 1.730604] usbdev5.1_ep00: PM: resume from 0, parent usb5 still 2
[ 1.730607] usbdev5.1_ep81: PM: resume from 0, parent 5-0:1.0 still 2
[ 1.730610] sr 0:0:0:0: resuming
[ 1.730617] sd 1:0:0:0: resuming
[ 1.733666] sd 1:0:1:0: resuming
[ 1.733674] iTCO_wdt iTCO_wdt: resuming
[ 1.733682] platform bluetooth: resuming
[ 1.733967] Restarting tasks ... <6>ata1: EH pending after completion, repeating EH (cnt=4)
[ 1.734709] ata1: soft resetting port
[ 1.995008] done.
[ 1.995057] Enabling non-boot CPUs ...
[ 2.055054] SMP alternatives: switching to SMP code
[ 2.055242] Booting processor 1/1 eip 3000
[ 2.065525] Initializing CPU#1
[ 2.143691] Calibrating delay using timer specific routine.. 6134.74 BogoMIPS (lpj=12269486)
[ 2.143702] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
[ 2.143709] monitor/mwait feature present.
[ 2.143711] using mwait in idle threads.
[ 2.143717] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 2.143719] CPU: L2 cache: 1024K
[ 2.143722] CPU: Physical Processor ID: 0
[ 2.143724] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000651d 00000000 00000001
[ 2.143995] CPU1: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09
[ 2.152123] CPU1 is up
[ 2.351652] ata1.00: configured for UDMA/33
[ 2.351665] ata1: EH complete
[ 2.774599] 8139too Fast Ethernet driver 0.9.28
[ 2.774997] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 2.776525] eth0: RealTek RTL8139 at 0xf8830000, 00:14:85:72:6e:62, IRQ 21
[ 2.776532] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 2.800304] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 3.647729] input: Power Button (FF) as /class/
[ 3.648308] ACPI: Power Button (FF) [PWRF]
[ 3.655715] input: Power Button (CM) as /class/
[ 3.656287] ACPI: Power Button (CM) [PWRB]
[ 4.700047] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 4.700226] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 8.102323] ata2: soft resetting port
[ 8.383916] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.508484] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.508495] ata2.00: configured for UDMA/133
[ 8.508503] ata2: EH pending after completion, repeating EH (cnt=4)
[ 8.508530] ata2: soft resetting port
[ 8.789808] ata2.01: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
[ 8.797788] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.821903] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.821911] ata2.00: configured for UDMA/133
[ 8.832046] ata2.01: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
[ 8.832051] ata2.01: configured for UDMA/133
[ 8.832058] ata2: EH complete
[ 8.832278] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 8.832439] sda: Write Protect is off
[ 8.832443] sda: Mode Sense: 00 3a 00 00
[ 8.832744] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.833063] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
[ 8.833242] sdb: Write Protect is off
[ 8.833247] sdb: Mode Sense: 00 3a 00 00
[ 8.833552] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.833842] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 8.834910] sda: Write Protect is off
[ 8.834915] sda: Mode Sense: 00 3a 00 00
[ 8.835268] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.835552] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
[ 8.835820] sdb: Write Protect is off
[ 8.835825] sdb: Mode Sense: 00 3a 00 00
[ 8.836832] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 47.605527] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 47.899710] ACPI: PCI interrupt for device 0000:02:05.0 disabled
[ 49.707806] PM: Preparing system for mem sleep
[ 49.707813] Disabling non-boot CPUs ...
[ 49.727615] CPU 1 is now offline
[ 49.727622] SMP alternatives: switching to UP code
[ 49.728743] CPU1 is down
[ 49.728748] Stopping tasks ... done.
[ 49.755509] Suspending console(s)
[ 49.755516] platform bluetooth: suspend
[ 49.755527] iTCO_wdt iTCO_wdt: suspend
[ 49.755533] sd 1:0:1:0: suspend
[ 49.756056] sd 1:0:0:0: suspend
[ 50.394757] sr 0:0:0:0: suspend
[ 50.394775] usbdev5.1_ep81: PM: suspend 0->2, parent 5-0:1.0 already 2
[ 50.394777] hub 5-0:1.0: PM: suspend 2-->2
[ 50.394779] hub 5-0:1.0: PM: suspend 2->2, parent usb5 already 2
[ 50.394782] usbdev5.1_ep00: PM: suspend 0->2, parent usb5 already 2
[ 50.394784] usb usb5: PM: suspend 2-->2
[ 50.394786] usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2
[ 50.394788] hub 4-0:1.0: PM: suspend 2-->2
[ 50.394789] hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2
[ 50.394792] usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2
[ 50.394793] usb usb4: PM: suspend 2-->2
[ 50.394796] usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2
[ 50.394797] hub 3-0:1.0: PM: suspend 2-->2
[ 50.394799] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2
[ 50.394801] usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2
[ 50.394803] usb usb3: PM: suspend 2-->2
[ 50.394805] usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2
[ 50.394807] hub 2-0:1.0: PM: suspend 2-->2
[ 50.394809] hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2
[ 50.394811] usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2
[ 50.394813] usb usb2: PM: suspend 2-->2
[ 50.394815] usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2
[ 50.394816] hub 1-0:1.0: PM: suspend 2-->2
[ 50.394818] hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2
[ 50.394820] usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2
[ 50.394822] usb usb1: PM: suspend 2-->2
[ 50.394824] platform vesafb.0: suspend
[ 50.394826] platform eisa.0: suspend
[ 50.394828] i8042 i8042: suspend
[ 51.292341] serial8250 serial8250: suspend
[ 51.292431] pci_express 0000:00:
[ 51.292434] pcspkr pcspkr: suspend
[ 51.292441] pnp 00:0d: suspend
[ 51.292443] system 00:0c: suspend
[ 51.292444] system 00:0b: suspend
[ 51.292446] system 00:0a: suspend
[ 51.292447] i8042 kbd 00:09: suspend
[ 51.292449] i8042 aux 00:08: suspend
[ 51.292451] parport_pc 00:07: suspend
[ 51.292692] pnp: Device 00:07 disabled.
[ 51.292695] serial 00:06: suspend
[ 51.292887] pnp: Device 00:06 disabled.
[ 51.292889] pnp 00:05: suspend
[ 51.292891] pnp 00:04: suspend
[ 51.292892] pnp 00:03: suspend
[ 51.292893] pnp 00:02: suspend
[ 51.292895] system 00:01: suspend
[ 51.292896] pnp 00:00: suspend
[ 51.292898] ohci1394 0000:02:07.0: suspend
[ 51.292900] ohci1394 does not fully support suspend and resume yet
[ 51.292903] ieee1394: hpsb_bus_reset called while bus reset already in progress
[ 51.306418] pci 0000:02:05.0: suspend
[ 51.306465] saa7134 0000:02:01.0: suspend
[ 51.306512] serial 0000:02:00.0: suspend
[ 51.322447] nvidia 0000:01:00.0: suspend
[ 51.322465] NVRM: RmPowerManagement: 3
[ 51.553588] pci 0000:00:1f.3: suspend
[ 51.553625] ata_piix 0000:00:1f.2: suspend
[ 51.554508] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 51.569971] pci 0000:00:1f.0: suspend
[ 51.570003] pci 0000:00:1e.0: suspend
[ 51.570041] ehci_hcd 0000:00:1d.7: suspend, may wakeup
[ 51.570104] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 51.586015] uhci_hcd 0000:00:1d.3: suspend
[ 51.586047] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 51.586049] uhci_hcd 0000:00:1d.2: suspend
[ 51.586080] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 51.586081] uhci_hcd 0000:00:1d.1: suspend
[ 51.586112] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 51.586114] uhci_hcd 0000:00:1d.0: suspend
[ 51.586144] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 51.586147] HDA Intel 0000:00:1b.0: suspend
[ 51.590034] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 51.606051] pcieport-driver 0000:00:01.0: suspend
[ 51.606098] agpgart-intel 0000:00:00.0: suspend
[ 51.606124] acpi acpi: suspend
[ 51.606134] PM: Entering mem sleep
[ 51.606136] platform bluetooth: LATE suspend
[ 51.606143] iTCO_wdt iTCO_wdt: LATE suspend
[ 51.606150] platform vesafb.0: LATE suspend
[ 51.606152] platform eisa.0: LATE suspend
[ 51.606154] i8042 i8042: LATE suspend
[ 51.606156] serial8250 serial8250: LATE suspend
[ 51.606236] pcspkr pcspkr: LATE suspend
[ 51.606241] ohci1394 0000:02:07.0: LATE suspend
[ 51.606243] pci 0000:02:05.0: LATE suspend
[ 51.606245] saa7134 0000:02:01.0: LATE suspend
[ 51.606246] serial 0000:02:00.0: LATE suspend
[ 51.606248] nvidia 0000:01:00.0: LATE suspend
[ 51.606250] pci 0000:00:1f.3: LATE suspend
[ 51.606251] pci 0000:00:1f.0: LATE suspend
[ 51.606253] pci 0000:00:1e.0: LATE suspend
[ 51.606254] HDA Intel 0000:00:1b.0: LATE suspend
[ 51.606256] pcieport-driver 0000:00:01.0: LATE suspend
[ 51.606257] agpgart-intel 0000:00:00.0: LATE suspend
[ 0.398991] Back to C!
[ 0.399273] agpgart-intel 0000:00:00.0: EARLY resume
[ 0.399277] pcieport-driver 0000:00:01.0: EARLY resume
[ 0.399279] HDA Intel 0000:00:1b.0: EARLY resume
[ 0.399282] uhci_hcd 0000:00:1d.0: EARLY resume
[ 0.399283] uhci_hcd 0000:00:1d.1: EARLY resume
[ 0.399285] uhci_hcd 0000:00:1d.2: EARLY resume
[ 0.399286] uhci_hcd 0000:00:1d.3: EARLY resume
[ 0.399288] ehci_hcd 0000:00:1d.7: EARLY resume
[ 0.399290] pci 0000:00:1e.0: EARLY resume
[ 0.399292] pci 0000:00:1f.0: EARLY resume
[ 0.399294] ata_piix 0000:00:1f.2: EARLY resume
[ 0.399295] pci 0000:00:1f.3: EARLY resume
[ 0.399297] nvidia 0000:01:00.0: EARLY resume
[ 0.399299] serial 0000:02:00.0: EARLY resume
[ 0.399301] saa7134 0000:02:01.0: EARLY resume
[ 0.399302] pci 0000:02:05.0: EARLY resume
[ 0.399304] ohci1394 0000:02:07.0: EARLY resume
[ 0.399309] pcspkr pcspkr: EARLY resume
[ 0.399375] serial8250 serial8250: EARLY resume
[ 0.399378] i8042 i8042: EARLY resume
[ 0.399379] platform eisa.0: EARLY resume
[ 0.399381] platform vesafb.0: EARLY resume
[ 0.399388] iTCO_wdt iTCO_wdt: EARLY resume
[ 0.399393] platform bluetooth: EARLY resume
[ 0.399395] PM: Finishing wakeup.
[ 0.399399] acpi acpi: resuming
[ 0.399407] agpgart-intel 0000:00:00.0: resuming
[ 0.399439] pcieport-driver 0000:00:01.0: resuming
[ 0.399456] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 200000f0)
[ 0.399480] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.399484] HDA Intel 0000:00:1b.0: resuming
[ 0.415287] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 105)
[ 0.415304] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing f0100004)
[ 0.415308] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 8)
[ 0.415314] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[ 0.415337] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.415344] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 0.472210] uhci_hcd 0000:00:1d.0: resuming
[ 0.472215] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 0.472221] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 0.472266] usb usb1: root hub lost power or was reset
[ 0.472281] uhci_hcd 0000:00:1d.1: resuming
[ 0.472285] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.472291] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 0.472334] usb usb2: root hub lost power or was reset
[ 0.472347] uhci_hcd 0000:00:1d.2: resuming
[ 0.472350] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 0.472356] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 0.472398] usb usb3: root hub lost power or was reset
[ 0.472411] uhci_hcd 0000:00:1d.3: resuming
[ 0.472414] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 0.472420] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 0.472462] usb usb4: root hub lost power or was reset
[ 0.472475] ehci_hcd 0000:00:1d.7: resuming
[ 0.488239] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 0.488247] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 0.488297] pci 0000:00:1e.0: resuming
[ 0.488337] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.488340] pci 0000:00:1f.0: resuming
[ 0.488370] ata_piix 0000:00:1f.2: resuming
[ 0.504288] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005)
[ 0.504304] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.504309] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 0.505459] pci 0000:00:1f.3: resuming
[ 0.505490] nvidia 0000:01:00.0: resuming
[ 0.505499] NVRM: RmPowerManagement: 4
[ 0.649267] serial 0000:02:00.0: resuming
[ 0.664117] PM: Writing back config space on device 0000:02:00.0 at offset f (was 3e010100, writing 3e010103)
[ 0.664137] PM: Writing back config space on device 0000:02:00.0 at offset 5 (was 1, writing a001)
[ 0.664142] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 0, writing f0007000)
[ 0.664147] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 0.664154] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2900080, writing 2900087)
[ 0.664175] saa7134 0000:02:01.0: resuming
[ 0.664184] PM: Writing back config space on device 0000:02:01.0 at offset f (was 20540100, writing 2054010b)
[ 0.664203] PM: Writing back config space on device 0000:02:01.0 at offset 4 (was 0, writing f0004000)
[ 0.664208] PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 2000)
[ 0.664215] PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2900000, writing 2900006)
[ 0.664244] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 0.664251] pci 0000:02:05.0: resuming
[ 0.664274] PM: Writing back config space on device 0000:02:05.0 at offset 5 (was 0, writing f0005000)
[ 0.664279] PM: Writing back config space on device 0000:02:05.0 at offset 4 (was 1, writing a401)
[ 0.664283] PM: Writing back config space on device 0000:02:05.0 at offset 3 (was 0, writing 2000)
[ 0.664290] PM: Writing back config space on device 0000:02:05.0 at offset 1 (was 2900000, writing 2900003)
[ 0.664307] ohci1394 0000:02:07.0: resuming
[ 0.680145] PM: Writing back config space on device 0000:02:07.0 at offset f (was 4020100, writing 4020109)
[ 0.680163] PM: Writing back config space on device 0000:02:07.0 at offset 5 (was 0, writing f0000000)
[ 0.680168] PM: Writing back config space on device 0000:02:07.0 at offset 4 (was 0, writing f0006000)
[ 0.680173] PM: Writing back config space on device 0000:02:07.0 at offset 3 (was 0, writing 2008)
[ 0.680180] PM: Writing back config space on device 0000:02:07.0 at offset 1 (was 2100000, writing 2100006)
[ 0.729758] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f0006000-
[ 0.729781] pnp 00:00: resuming
[ 0.729783] system 00:01: resuming
[ 0.729785] pnp 00:02: resuming
[ 0.729786] pnp 00:03: resuming
[ 0.729788] pnp 00:04: resuming
[ 0.729789] pnp 00:05: resuming
[ 0.729791] serial 00:06: resuming
[ 0.730617] pnp: Device 00:06 activated.
[ 0.730620] parport_pc 00:07: resuming
[ 0.731665] pnp: Device 00:07 activated.
[ 0.731667] i8042 aux 00:08: resuming
[ 0.731788] pnp: Failed to activate device 00:08.
[ 0.731790] i8042 kbd 00:09: resuming
[ 0.731799] pnp: Failed to activate device 00:09.
[ 0.731801] system 00:0a: resuming
[ 0.731802] system 00:0b: resuming
[ 0.731803] system 00:0c: resuming
[ 0.731805] pnp 00:0d: resuming
[ 0.731808] pcspkr pcspkr: resuming
[ 0.731810] pci_express 0000:00:
[ 0.731901] serial8250 serial8250: resuming
[ 0.731906] i8042 i8042: resuming
[ 0.732436] atkbd serio0: resuming
[ 0.770882] platform eisa.0: resuming
[ 0.770885] psmouse serio1: resuming
[ 1.506443] platform vesafb.0: resuming
[ 1.506446] usb usb1: resuming
[ 1.546450] usb usb2: resuming
[ 1.586521] usb usb3: resuming
[ 1.626593] usb usb4: resuming
[ 1.666666] usbdev5.1_ep00: PM: resume from 0, parent usb5 still 2
[ 1.666669] usbdev5.1_ep81: PM: resume from 0, parent 5-0:1.0 still 2
[ 1.666672] sr 0:0:0:0: resuming
[ 1.666678] sd 1:0:0:0: resuming
[ 1.669728] sd 1:0:1:0: resuming
[ 1.669736] iTCO_wdt iTCO_wdt: resuming
[ 1.669743] platform bluetooth: resuming
[ 1.670503] Restarting tasks ... <6>ata1: EH pending after completion, repeating EH (cnt=4)
[ 1.670770] ata1: soft resetting port
[ 1.709866] done.
[ 1.709914] Enabling non-boot CPUs ...
[ 1.778541] SMP alternatives: switching to SMP code
[ 1.778758] Booting processor 1/1 eip 3000
[ 1.789044] Initializing CPU#1
[ 1.867580] Calibrating delay using timer specific routine.. 6134.73 BogoMIPS (lpj=12269476)
[ 1.867590] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
[ 1.867598] monitor/mwait feature present.
[ 1.867600] using mwait in idle threads.
[ 1.867605] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 1.867608] CPU: L2 cache: 1024K
[ 1.867610] CPU: Physical Processor ID: 0
[ 1.867613] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000651d 00000000 00000001
[ 1.867883] CPU1: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09
[ 1.871961] CPU1 is up
[ 2.203199] ata1.00: configured for UDMA/33
[ 2.203212] ata1: EH complete
[ 2.478302] 8139too Fast Ethernet driver 0.9.28
[ 2.478706] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 2.480217] eth0: RealTek RTL8139 at 0xf88f0000, 00:14:85:72:6e:62, IRQ 21
[ 2.480224] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 2.501457] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 3.007560] input: Power Button (FF) as /class/
[ 3.007909] ACPI: Power Button (FF) [PWRF]
[ 3.008198] input: Power Button (CM) as /class/
[ 3.008464] ACPI: Power Button (CM) [PWRB]
[ 4.113914] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 4.114353] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 4.354604] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 8.047991] ata2: soft resetting port
[ 8.329707] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.468943] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.468953] ata2.00: configured for UDMA/133
[ 8.468960] ata2: EH pending after completion, repeating EH (cnt=4)
[ 8.468984] ata2: soft resetting port
[ 8.754239] ata2.01: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
[ 8.766224] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.794362] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.794373] ata2.00: configured for UDMA/133
[ 8.803874] ata2.01: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
[ 8.803880] ata2.01: configured for UDMA/133
[ 8.803888] ata2: EH complete
[ 8.804151] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 8.804262] sda: Write Protect is off
[ 8.804266] sda: Mode Sense: 00 3a 00 00
[ 8.804537] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.804829] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
[ 8.804993] sdb: Write Protect is off
[ 8.804999] sdb: Mode Sense: 00 3a 00 00
[ 8.805344] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.805729] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 8.806882] sda: Write Protect is off
[ 8.806887] sda: Mode Sense: 00 3a 00 00
[ 8.807196] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.821328] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
[ 8.822404] sdb: Write Protect is off
[ 8.822409] sdb: Mode Sense: 00 3a 00 00
[ 8.827075] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.606998] eth0: no IPv6 routers present
[10146.410872] saa7133[0]: dsp access wait timeout [bit=WRR]
[10146.411409] saa7133[0]: dsp access wait timeout [bit=WRR]
[10146.414553] saa7133[0]: dsp access wait timeout [bit=WRR]
[10146.415082] saa7133[0]: dsp access wait timeout [bit=WRR]
[10218.443666] NTFS driver 2.1.28 [Flags: R/O MODULE].
[10218.446774] NTFS-fs warning (device sdb3): parse_options(): Option utf8 is no longer supported, using option nls=utf8. Please use option nls=utf8 in the future and make sure utf8 is compiled either as a module or into the kernel.
[10218.519444] NTFS volume version 3.1.
[16644.114827] ppdev0: registered pardevice
[16644.162104] ppdev0: unregistered pardevice
[16644.625282] ppdev0: registered pardevice
[16644.676961] ppdev0: unregistered pardevice
[16664.829200] ppdev0: registered pardevice
[16664.880527] ppdev0: unregistered pardevice
[16665.470648] ppdev0: registered pardevice
[16665.519135] ppdev0: unregistered pardevice
[17064.692050] ppdev0: registered pardevice
[17064.738482] ppdev0: unregistered pardevice
[17094.678506] ppdev0: registered pardevice
[17094.727972] ppdev0: unregistered pardevice
[17124.670392] ppdev0: registered pardevice
[17124.717310] ppdev0: unregistered pardevice
[17154.662445] ppdev0: registered pardevice
[17154.705736] ppdev0: unregistered pardevice
[17184.646189] ppdev0: registered pardevice
[17184.695925] ppdev0: unregistered pardevice
[17214.639221] ppdev0: registered pardevice
[17214.688670] ppdev0: unregistered pardevice
[22439.706414] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[22440.143103] ACPI: PCI interrupt for device 0000:02:05.0 disabled
[22441.961696] PM: Preparing system for mem sleep
[22441.961704] Disabling non-boot CPUs ...
[22441.983833] CPU 1 is now offline
[22441.983839] SMP alternatives: switching to UP code
[22441.985032] CPU1 is down
[22441.985037] Stopping tasks ... done.
[22442.017444] Suspending console(s)
[22442.017450] platform bluetooth: suspend
[22442.017460] iTCO_wdt iTCO_wdt: suspend
[22442.017466] sd 1:0:1:0: suspend
[22442.017965] sd 1:0:0:0: suspend
[22442.765790] sr 0:0:0:0: suspend
[22442.765809] usbdev5.1_ep81: PM: suspend 0->2, parent 5-0:1.0 already 2
[22442.765812] hub 5-0:1.0: PM: suspend 2-->2
[22442.765814] hub 5-0:1.0: PM: suspend 2->2, parent usb5 already 2
[22442.765816] usbdev5.1_ep00: PM: suspend 0->2, parent usb5 already 2
[22442.765818] usb usb5: PM: suspend 2-->2
[22442.765821] usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2
[22442.765823] hub 4-0:1.0: PM: suspend 2-->2
[22442.765824] hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2
[22442.765826] usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2
[22442.765828] usb usb4: PM: suspend 2-->2
[22442.765831] usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2
[22442.765833] hub 3-0:1.0: PM: suspend 2-->2
[22442.765834] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2
[22442.765836] usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2
[22442.765838] usb usb3: PM: suspend 2-->2
[22442.765841] usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2
[22442.765842] hub 2-0:1.0: PM: suspend 2-->2
[22442.765844] hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2
[22442.765846] usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2
[22442.765848] usb usb2: PM: suspend 2-->2
[22442.765851] usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2
[22442.765852] hub 1-0:1.0: PM: suspend 2-->2
[22442.765854] hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2
[22442.765856] usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2
[22442.765858] usb usb1: PM: suspend 2-->2
[22442.765860] platform vesafb.0: suspend
[22442.765862] platform eisa.0: suspend
[22442.765864] i8042 i8042: suspend
[22443.666459] serial8250 serial8250: suspend
[22443.666551] pci_express 0000:00:
[22443.666553] pcspkr pcspkr: suspend
[22443.666560] pnp 00:0d: suspend
[22443.666563] system 00:0c: suspend
[22443.666564] system 00:0b: suspend
[22443.666566] system 00:0a: suspend
[22443.666567] i8042 kbd 00:09: suspend
[22443.666569] i8042 aux 00:08: suspend
[22443.666571] parport_pc 00:07: suspend
[22443.666812] pnp: Device 00:07 disabled.
[22443.666815] serial 00:06: suspend
[22443.667004] pnp: Device 00:06 disabled.
[22443.667007] pnp 00:05: suspend
[22443.667008] pnp 00:04: suspend
[22443.667009] pnp 00:03: suspend
[22443.667011] pnp 00:02: suspend
[22443.667012] system 00:01: suspend
[22443.667014] pnp 00:00: suspend
[22443.667016] ohci1394 0000:02:07.0: suspend
[22443.667018] ohci1394 does not fully support suspend and resume yet
[22443.667020] ieee1394: hpsb_bus_reset called while bus reset already in progress
[22443.684609] pci 0000:02:05.0: suspend
[22443.684657] saa7134 0000:02:01.0: suspend
[22443.684703] serial 0000:02:00.0: suspend
[22443.700646] nvidia 0000:01:00.0: suspend
[22443.700659] NVRM: RmPowerManagement: 3
[22443.930203] pci 0000:00:1f.3: suspend
[22443.930239] ata_piix 0000:00:1f.2: suspend
[22443.931137] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[22443.948179] pci 0000:00:1f.0: suspend
[22443.948211] pci 0000:00:1e.0: suspend
[22443.948248] ehci_hcd 0000:00:1d.7: suspend, may wakeup
[22443.948311] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[22443.964231] uhci_hcd 0000:00:1d.3: suspend
[22443.964263] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[22443.964265] uhci_hcd 0000:00:1d.2: suspend
[22443.964296] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[22443.964298] uhci_hcd 0000:00:1d.1: suspend
[22443.964328] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[22443.964330] uhci_hcd 0000:00:1d.0: suspend
[22443.964361] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[22443.964363] HDA Intel 0000:00:1b.0: suspend
[22443.968250] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[22443.984266] pcieport-driver 0000:00:01.0: suspend
[22443.984313] agpgart-intel 0000:00:00.0: suspend
[22443.984340] acpi acpi: suspend
[22443.984349] PM: Entering mem sleep
[22443.984352] platform bluetooth: LATE suspend
[22443.984358] iTCO_wdt iTCO_wdt: LATE suspend
[22443.984366] platform vesafb.0: LATE suspend
[22443.984368] platform eisa.0: LATE suspend
[22443.984370] i8042 i8042: LATE suspend
[22443.984373] serial8250 serial8250: LATE suspend
[22443.984452] pcspkr pcspkr: LATE suspend
[22443.984457] ohci1394 0000:02:07.0: LATE suspend
[22443.984459] pci 0000:02:05.0: LATE suspend
[22443.984461] saa7134 0000:02:01.0: LATE suspend
[22443.984463] serial 0000:02:00.0: LATE suspend
[22443.984465] nvidia 0000:01:00.0: LATE suspend
[22443.984466] pci 0000:00:1f.3: LATE suspend
[22443.984468] pci 0000:00:1f.0: LATE suspend
[22443.984470] pci 0000:00:1e.0: LATE suspend
[22443.984471] HDA Intel 0000:00:1b.0: LATE suspend
[22443.984473] pcieport-driver 0000:00:01.0: LATE suspend
[22443.984474] agpgart-intel 0000:00:00.0: LATE suspend
[ 0.399065] Back to C!
[ 0.399348] agpgart-intel 0000:00:00.0: EARLY resume
[ 0.399351] pcieport-driver 0000:00:01.0: EARLY resume
[ 0.399354] HDA Intel 0000:00:1b.0: EARLY resume
[ 0.399356] uhci_hcd 0000:00:1d.0: EARLY resume
[ 0.399357] uhci_hcd 0000:00:1d.1: EARLY resume
[ 0.399359] uhci_hcd 0000:00:1d.2: EARLY resume
[ 0.399361] uhci_hcd 0000:00:1d.3: EARLY resume
[ 0.399362] ehci_hcd 0000:00:1d.7: EARLY resume
[ 0.399364] pci 0000:00:1e.0: EARLY resume
[ 0.399366] pci 0000:00:1f.0: EARLY resume
[ 0.399368] ata_piix 0000:00:1f.2: EARLY resume
[ 0.399369] pci 0000:00:1f.3: EARLY resume
[ 0.399371] nvidia 0000:01:00.0: EARLY resume
[ 0.399373] serial 0000:02:00.0: EARLY resume
[ 0.399375] saa7134 0000:02:01.0: EARLY resume
[ 0.399376] pci 0000:02:05.0: EARLY resume
[ 0.399378] ohci1394 0000:02:07.0: EARLY resume
[ 0.399383] pcspkr pcspkr: EARLY resume
[ 0.399449] serial8250 serial8250: EARLY resume
[ 0.399452] i8042 i8042: EARLY resume
[ 0.399453] platform eisa.0: EARLY resume
[ 0.399455] platform vesafb.0: EARLY resume
[ 0.399462] iTCO_wdt iTCO_wdt: EARLY resume
[ 0.399468] platform bluetooth: EARLY resume
[ 0.399469] PM: Finishing wakeup.
[ 0.399473] acpi acpi: resuming
[ 0.399481] agpgart-intel 0000:00:00.0: resuming
[ 0.399514] pcieport-driver 0000:00:01.0: resuming
[ 0.399531] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 200000f0)
[ 0.399554] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.399558] HDA Intel 0000:00:1b.0: resuming
[ 0.419338] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 105)
[ 0.419355] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing f0100004)
[ 0.419360] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 8)
[ 0.419366] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[ 0.419389] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.419395] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 0.476260] uhci_hcd 0000:00:1d.0: resuming
[ 0.476264] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 0.476271] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 0.476316] usb usb1: root hub lost power or was reset
[ 0.476331] uhci_hcd 0000:00:1d.1: resuming
[ 0.476335] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.476341] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 0.476384] usb usb2: root hub lost power or was reset
[ 0.476397] uhci_hcd 0000:00:1d.2: resuming
[ 0.476400] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 0.476406] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 0.476448] usb usb3: root hub lost power or was reset
[ 0.476462] uhci_hcd 0000:00:1d.3: resuming
[ 0.476465] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 0.476471] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 0.476513] usb usb4: root hub lost power or was reset
[ 0.476526] ehci_hcd 0000:00:1d.7: resuming
[ 0.492292] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 0.492299] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 0.492350] pci 0000:00:1e.0: resuming
[ 0.492391] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.492394] pci 0000:00:1f.0: resuming
[ 0.492424] ata_piix 0000:00:1f.2: resuming
[ 0.508337] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005)
[ 0.508354] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.508359] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 0.509510] pci 0000:00:1f.3: resuming
[ 0.509541] nvidia 0000:01:00.0: resuming
[ 0.509550] NVRM: RmPowerManagement: 4
[ 0.653584] serial 0000:02:00.0: resuming
[ 0.668183] PM: Writing back config space on device 0000:02:00.0 at offset f (was 3e010100, writing 3e010103)
[ 0.668202] PM: Writing back config space on device 0000:02:00.0 at offset 5 (was 1, writing a001)
[ 0.668208] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 0, writing f0007000)
[ 0.668213] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 0.668220] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2900080, writing 2900087)
[ 0.668241] saa7134 0000:02:01.0: resuming
[ 0.668250] PM: Writing back config space on device 0000:02:01.0 at offset f (was 20540100, writing 2054010b)
[ 0.668269] PM: Writing back config space on device 0000:02:01.0 at offset 4 (was 0, writing f0004000)
[ 0.668274] PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 2000)
[ 0.668281] PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2900000, writing 2900006)
[ 0.668310] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 0.668316] pci 0000:02:05.0: resuming
[ 0.668339] PM: Writing back config space on device 0000:02:05.0 at offset 5 (was 0, writing f0005000)
[ 0.668344] PM: Writing back config space on device 0000:02:05.0 at offset 4 (was 1, writing a401)
[ 0.668349] PM: Writing back config space on device 0000:02:05.0 at offset 3 (was 0, writing 2000)
[ 0.668356] PM: Writing back config space on device 0000:02:05.0 at offset 1 (was 2900000, writing 2900003)
[ 0.668372] ohci1394 0000:02:07.0: resuming
[ 0.684210] PM: Writing back config space on device 0000:02:07.0 at offset f (was 4020100, writing 4020109)
[ 0.684229] PM: Writing back config space on device 0000:02:07.0 at offset 5 (was 0, writing f0000000)
[ 0.684234] PM: Writing back config space on device 0000:02:07.0 at offset 4 (was 0, writing f0006000)
[ 0.684239] PM: Writing back config space on device 0000:02:07.0 at offset 3 (was 0, writing 2008)
[ 0.684246] PM: Writing back config space on device 0000:02:07.0 at offset 1 (was 2100000, writing 2100006)
[ 0.733825] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f0006000-
[ 0.733848] pnp 00:00: resuming
[ 0.733850] system 00:01: resuming
[ 0.733851] pnp 00:02: resuming
[ 0.733853] pnp 00:03: resuming
[ 0.733854] pnp 00:04: resuming
[ 0.733855] pnp 00:05: resuming
[ 0.733857] serial 00:06: resuming
[ 0.734688] pnp: Device 00:06 activated.
[ 0.734692] parport_pc 00:07: resuming
[ 0.735734] pnp: Device 00:07 activated.
[ 0.735736] i8042 aux 00:08: resuming
[ 0.735858] pnp: Failed to activate device 00:08.
[ 0.735860] i8042 kbd 00:09: resuming
[ 0.735869] pnp: Failed to activate device 00:09.
[ 0.735871] system 00:0a: resuming
[ 0.735872] system 00:0b: resuming
[ 0.735874] system 00:0c: resuming
[ 0.735875] pnp 00:0d: resuming
[ 0.735878] pcspkr pcspkr: resuming
[ 0.735881] pci_express 0000:00:
[ 0.735973] serial8250 serial8250: resuming
[ 0.735977] i8042 i8042: resuming
[ 0.736507] atkbd serio0: resuming
[ 0.774513] platform eisa.0: resuming
[ 0.774515] psmouse serio1: resuming
[ 1.510209] platform vesafb.0: resuming
[ 1.510211] usb usb1: resuming
[ 1.550531] usb usb2: resuming
[ 1.590602] usb usb3: resuming
[ 1.630675] usb usb4: resuming
[ 1.670747] usbdev5.1_ep00: PM: resume from 0, parent usb5 still 2
[ 1.670750] usbdev5.1_ep81: PM: resume from 0, parent 5-0:1.0 still 2
[ 1.670754] sr 0:0:0:0: resuming
[ 1.670760] sd 1:0:0:0: resuming
[ 1.673811] sd 1:0:1:0: resuming
[ 1.673819] iTCO_wdt iTCO_wdt: resuming
[ 1.673827] platform bluetooth: resuming
[ 1.674112] Restarting tasks ... <6>ata1: EH pending after completion, repeating EH (cnt=4)
[ 1.674856] ata1: soft resetting port
[ 1.726713] done.
[ 1.726753] Enabling non-boot CPUs ...
[ 1.746685] SMP alternatives: switching to SMP code
[ 1.746883] Booting processor 1/1 eip 3000
[ 1.757167] Initializing CPU#1
[ 1.835643] Calibrating delay using timer specific routine.. 6134.65 BogoMIPS (lpj=12269308)
[ 1.835653] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
[ 1.835660] monitor/mwait feature present.
[ 1.835662] using mwait in idle threads.
[ 1.835668] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 1.835670] CPU: L2 cache: 1024K
[ 1.835673] CPU: Physical Processor ID: 0
[ 1.835675] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000651d 00000000 00000001
[ 1.835946] CPU1: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09
[ 1.844021] CPU1 is up
[ 2.167275] ata1.00: configured for UDMA/33
[ 2.167289] ata1: EH complete
[ 2.512945] 8139too Fast Ethernet driver 0.9.28
[ 2.513151] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 2.513922] eth0: RealTek RTL8139 at 0xf88f0000, 00:14:85:72:6e:62, IRQ 21
[ 2.513928] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 2.528433] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 2.868391] input: Power Button (FF) as /class/
[ 2.868813] ACPI: Power Button (FF) [PWRF]
[ 2.869104] input: Power Button (CM) as /class/
[ 2.869475] ACPI: Power Button (CM) [PWRB]
[ 3.958140] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 3.958472] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 7.908940] ata2: soft resetting port
[ 8.190424] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.317830] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.317840] ata2.00: configured for UDMA/133
[ 8.317847] ata2: EH pending after completion, repeating EH (cnt=4)
[ 8.317872] ata2: soft resetting port
[ 8.595174] ata2.01: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
[ 8.602846] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.622977] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.622994] ata2.00: configured for UDMA/133
[ 8.632218] ata2.01: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
[ 8.632230] ata2.01: configured for UDMA/133
[ 8.632239] ata2: EH complete
[ 8.642678] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 8.651806] sda: Write Protect is off
[ 8.651814] sda: Mode Sense: 00 3a 00 00
[ 8.671313] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.677812] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
[ 8.689362] sdb: Write Protect is off
[ 8.689369] sdb: Mode Sense: 00 3a 00 00
[ 8.689648] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.690144] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 8.690385] sda: Write Protect is off
[ 8.690391] sda: Mode Sense: 00 3a 00 00
[ 8.690706] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.691081] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
[ 8.691217] sdb: Write Protect is off
[ 8.691221] sdb: Mode Sense: 00 3a 00 00
[ 8.691549] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.086179] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 27.904837] eth0: no IPv6 routers present
[ 6267.354873] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 6267.691779] ACPI: PCI interrupt for device 0000:02:05.0 disabled
[ 6269.526179] PM: Preparing system for mem sleep
[ 6269.526186] Disabling non-boot CPUs ...
[ 6269.559790] CPU 1 is now offline
[ 6269.559797] SMP alternatives: switching to UP code
[ 6269.561122] CPU1 is down
[ 6269.561127] Stopping tasks ... done.
[ 6269.591384] Suspending console(s)
[ 6269.591391] platform bluetooth: suspend
[ 6269.591401] iTCO_wdt iTCO_wdt: suspend
[ 6269.591408] sd 1:0:1:0: suspend
[ 6269.591913] sd 1:0:0:0: suspend
[ 6270.301729] sr 0:0:0:0: suspend
[ 6270.301747] usbdev5.1_ep81: PM: suspend 0->2, parent 5-0:1.0 already 2
[ 6270.301749] hub 5-0:1.0: PM: suspend 2-->2
[ 6270.301751] hub 5-0:1.0: PM: suspend 2->2, parent usb5 already 2
[ 6270.301754] usbdev5.1_ep00: PM: suspend 0->2, parent usb5 already 2
[ 6270.301756] usb usb5: PM: suspend 2-->2
[ 6270.301758] usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2
[ 6270.301760] hub 4-0:1.0: PM: suspend 2-->2
[ 6270.301762] hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2
[ 6270.301764] usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2
[ 6270.301766] usb usb4: PM: suspend 2-->2
[ 6270.301768] usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2
[ 6270.301770] hub 3-0:1.0: PM: suspend 2-->2
[ 6270.301772] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2
[ 6270.301774] usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2
[ 6270.301776] usb usb3: PM: suspend 2-->2
[ 6270.301778] usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2
[ 6270.301780] hub 2-0:1.0: PM: suspend 2-->2
[ 6270.301782] hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2
[ 6270.301784] usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2
[ 6270.301786] usb usb2: PM: suspend 2-->2
[ 6270.301788] usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2
[ 6270.301790] hub 1-0:1.0: PM: suspend 2-->2
[ 6270.301792] hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2
[ 6270.301794] usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2
[ 6270.301796] usb usb1: PM: suspend 2-->2
[ 6270.301798] platform vesafb.0: suspend
[ 6270.301800] platform eisa.0: suspend
[ 6270.301802] i8042 i8042: suspend
[ 6271.202244] serial8250 serial8250: suspend
[ 6271.202335] pci_express 0000:00:
[ 6271.202337] pcspkr pcspkr: suspend
[ 6271.202344] pnp 00:0d: suspend
[ 6271.202346] system 00:0c: suspend
[ 6271.202348] system 00:0b: suspend
[ 6271.202349] system 00:0a: suspend
[ 6271.202351] i8042 kbd 00:09: suspend
[ 6271.202353] i8042 aux 00:08: suspend
[ 6271.202354] parport_pc 00:07: suspend
[ 6271.202594] pnp: Device 00:07 disabled.
[ 6271.202597] serial 00:06: suspend
[ 6271.202788] pnp: Device 00:06 disabled.
[ 6271.202790] pnp 00:05: suspend
[ 6271.202792] pnp 00:04: suspend
[ 6271.202793] pnp 00:03: suspend
[ 6271.202795] pnp 00:02: suspend
[ 6271.202796] system 00:01: suspend
[ 6271.202798] pnp 00:00: suspend
[ 6271.202800] ohci1394 0000:02:07.0: suspend
[ 6271.202802] ohci1394 does not fully support suspend and resume yet
[ 6271.202805] ieee1394: hpsb_bus_reset called while bus reset already in progress
[ 6271.220456] pci 0000:02:05.0: suspend
[ 6271.220504] saa7134 0000:02:01.0: suspend
[ 6271.220550] serial 0000:02:00.0: suspend
[ 6271.240492] nvidia 0000:01:00.0: suspend
[ 6271.240505] NVRM: RmPowerManagement: 3
[ 6271.470189] pci 0000:00:1f.3: suspend
[ 6271.470225] ata_piix 0000:00:1f.2: suspend
[ 6271.471097] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 6271.488033] pci 0000:00:1f.0: suspend
[ 6271.488065] pci 0000:00:1e.0: suspend
[ 6271.488103] ehci_hcd 0000:00:1d.7: suspend, may wakeup
[ 6271.488166] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 6271.504077] uhci_hcd 0000:00:1d.3: suspend
[ 6271.504109] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 6271.504111] uhci_hcd 0000:00:1d.2: suspend
[ 6271.504142] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 6271.504144] uhci_hcd 0000:00:1d.1: suspend
[ 6271.504174] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 6271.504176] uhci_hcd 0000:00:1d.0: suspend
[ 6271.504207] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 6271.504209] HDA Intel 0000:00:1b.0: suspend
[ 6271.508096] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 6271.524112] pcieport-driver 0000:00:01.0: suspend
[ 6271.524160] agpgart-intel 0000:00:00.0: suspend
[ 6271.524186] acpi acpi: suspend
[ 6271.524196] PM: Entering mem sleep
[ 6271.524198] platform bluetooth: LATE suspend
[ 6271.524205] iTCO_wdt iTCO_wdt: LATE suspend
[ 6271.524212] platform vesafb.0: LATE suspend
[ 6271.524214] platform eisa.0: LATE suspend
[ 6271.524216] i8042 i8042: LATE suspend
[ 6271.524219] serial8250 serial8250: LATE suspend
[ 6271.524298] pcspkr pcspkr: LATE suspend
[ 6271.524303] ohci1394 0000:02:07.0: LATE suspend
[ 6271.524305] pci 0000:02:05.0: LATE suspend
[ 6271.524307] saa7134 0000:02:01.0: LATE suspend
[ 6271.524309] serial 0000:02:00.0: LATE suspend
[ 6271.524311] nvidia 0000:01:00.0: LATE suspend
[ 6271.524313] pci 0000:00:1f.3: LATE suspend
[ 6271.524314] pci 0000:00:1f.0: LATE suspend
[ 6271.524315] pci 0000:00:1e.0: LATE suspend
[ 6271.524317] HDA Intel 0000:00:1b.0: LATE suspend
[ 6271.524319] pcieport-driver 0000:00:01.0: LATE suspend
[ 6271.524320] agpgart-intel 0000:00:00.0: LATE suspend
[ 0.399034] Back to C!
[ 0.399073] CMOS clock skew detected in timer resume!
[ 0.399318] agpgart-intel 0000:00:00.0: EARLY resume
[ 0.399322] pcieport-driver 0000:00:01.0: EARLY resume
[ 0.399324] HDA Intel 0000:00:1b.0: EARLY resume
[ 0.399326] uhci_hcd 0000:00:1d.0: EARLY resume
[ 0.399328] uhci_hcd 0000:00:1d.1: EARLY resume
[ 0.399329] uhci_hcd 0000:00:1d.2: EARLY resume
[ 0.399331] uhci_hcd 0000:00:1d.3: EARLY resume
[ 0.399333] ehci_hcd 0000:00:1d.7: EARLY resume
[ 0.399335] pci 0000:00:1e.0: EARLY resume
[ 0.399337] pci 0000:00:1f.0: EARLY resume
[ 0.399338] ata_piix 0000:00:1f.2: EARLY resume
[ 0.399340] pci 0000:00:1f.3: EARLY resume
[ 0.399342] nvidia 0000:01:00.0: EARLY resume
[ 0.399344] serial 0000:02:00.0: EARLY resume
[ 0.399346] saa7134 0000:02:01.0: EARLY resume
[ 0.399347] pci 0000:02:05.0: EARLY resume
[ 0.399349] ohci1394 0000:02:07.0: EARLY resume
[ 0.399354] pcspkr pcspkr: EARLY resume
[ 0.399420] serial8250 serial8250: EARLY resume
[ 0.399423] i8042 i8042: EARLY resume
[ 0.399424] platform eisa.0: EARLY resume
[ 0.399426] platform vesafb.0: EARLY resume
[ 0.399433] iTCO_wdt iTCO_wdt: EARLY resume
[ 0.399438] platform bluetooth: EARLY resume
[ 0.399440] PM: Finishing wakeup.
[ 0.399444] acpi acpi: resuming
[ 0.399452] agpgart-intel 0000:00:00.0: resuming
[ 0.399484] pcieport-driver 0000:00:01.0: resuming
[ 0.399502] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 200000f0)
[ 0.399525] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.399529] HDA Intel 0000:00:1b.0: resuming
[ 0.415332] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 105)
[ 0.415348] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing f0100004)
[ 0.415353] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 8)
[ 0.415359] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[ 0.415382] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.415388] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 0.472254] uhci_hcd 0000:00:1d.0: resuming
[ 0.472260] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 0.472266] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 0.472310] usb usb1: root hub lost power or was reset
[ 0.472326] uhci_hcd 0000:00:1d.1: resuming
[ 0.472329] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.472335] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 0.472378] usb usb2: root hub lost power or was reset
[ 0.472391] uhci_hcd 0000:00:1d.2: resuming
[ 0.472394] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 0.472400] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 0.472442] usb usb3: root hub lost power or was reset
[ 0.472455] uhci_hcd 0000:00:1d.3: resuming
[ 0.472458] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 0.472464] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 0.472506] usb usb4: root hub lost power or was reset
[ 0.472519] ehci_hcd 0000:00:1d.7: resuming
[ 0.488284] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 0.488292] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 0.488342] pci 0000:00:1e.0: resuming
[ 0.488383] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.488385] pci 0000:00:1f.0: resuming
[ 0.488415] ata_piix 0000:00:1f.2: resuming
[ 0.504332] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005)
[ 0.504349] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.504354] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 0.505508] pci 0000:00:1f.3: resuming
[ 0.505538] nvidia 0000:01:00.0: resuming
[ 0.505547] NVRM: RmPowerManagement: 4
[ 0.649560] serial 0000:02:00.0: resuming
[ 0.664178] PM: Writing back config space on device 0000:02:00.0 at offset f (was 3e010100, writing 3e010103)
[ 0.664198] PM: Writing back config space on device 0000:02:00.0 at offset 5 (was 1, writing a001)
[ 0.664203] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 0, writing f0007000)
[ 0.664208] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 0.664215] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2900080, writing 2900087)
[ 0.664236] saa7134 0000:02:01.0: resuming
[ 0.664245] PM: Writing back config space on device 0000:02:01.0 at offset f (was 20540100, writing 2054010b)
[ 0.664264] PM: Writing back config space on device 0000:02:01.0 at offset 4 (was 0, writing f0004000)
[ 0.664269] PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 2000)
[ 0.664275] PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2900000, writing 2900006)
[ 0.664304] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 0.664311] pci 0000:02:05.0: resuming
[ 0.664334] PM: Writing back config space on device 0000:02:05.0 at offset 5 (was 0, writing f0005000)
[ 0.664339] PM: Writing back config space on device 0000:02:05.0 at offset 4 (was 1, writing a401)
[ 0.664344] PM: Writing back config space on device 0000:02:05.0 at offset 3 (was 0, writing 2000)
[ 0.664350] PM: Writing back config space on device 0000:02:05.0 at offset 1 (was 2900000, writing 2900003)
[ 0.664367] ohci1394 0000:02:07.0: resuming
[ 0.680205] PM: Writing back config space on device 0000:02:07.0 at offset f (was 4020100, writing 4020109)
[ 0.680224] PM: Writing back config space on device 0000:02:07.0 at offset 5 (was 0, writing f0000000)
[ 0.680229] PM: Writing back config space on device 0000:02:07.0 at offset 4 (was 0, writing f0006000)
[ 0.680234] PM: Writing back config space on device 0000:02:07.0 at offset 3 (was 0, writing 2008)
[ 0.680241] PM: Writing back config space on device 0000:02:07.0 at offset 1 (was 2100000, writing 2100006)
[ 0.729818] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f0006000-
[ 0.729841] pnp 00:00: resuming
[ 0.729842] system 00:01: resuming
[ 0.729844] pnp 00:02: resuming
[ 0.729845] pnp 00:03: resuming
[ 0.729847] pnp 00:04: resuming
[ 0.729848] pnp 00:05: resuming
[ 0.729850] serial 00:06: resuming
[ 0.730676] pnp: Device 00:06 activated.
[ 0.730679] parport_pc 00:07: resuming
[ 0.731718] pnp: Device 00:07 activated.
[ 0.731720] i8042 aux 00:08: resuming
[ 0.731841] pnp: Failed to activate device 00:08.
[ 0.731843] i8042 kbd 00:09: resuming
[ 0.731852] pnp: Failed to activate device 00:09.
[ 0.731853] system 00:0a: resuming
[ 0.731855] system 00:0b: resuming
[ 0.731856] system 00:0c: resuming
[ 0.731857] pnp 00:0d: resuming
[ 0.731861] pcspkr pcspkr: resuming
[ 0.731863] pci_express 0000:00:
[ 0.731954] serial8250 serial8250: resuming
[ 0.731959] i8042 i8042: resuming
[ 0.732390] atkbd serio0: resuming
[ 0.770952] platform eisa.0: resuming
[ 0.770954] psmouse serio1: resuming
[ 1.506615] platform vesafb.0: resuming
[ 1.506617] usb usb1: resuming
[ 1.546567] usb usb2: resuming
[ 1.586638] usb usb3: resuming
[ 1.626710] usb usb4: resuming
[ 1.666783] usbdev5.1_ep00: PM: resume from 0, parent usb5 still 2
[ 1.666785] usbdev5.1_ep81: PM: resume from 0, parent 5-0:1.0 still 2
[ 1.666789] sr 0:0:0:0: resuming
[ 1.666795] sd 1:0:0:0: resuming
[ 1.669844] sd 1:0:1:0: resuming
[ 1.669852] iTCO_wdt iTCO_wdt: resuming
[ 1.669859] platform bluetooth: resuming
[ 1.670617] Restarting tasks ... <6>ata1: EH pending after completion, repeating EH (cnt=4)
[ 1.670886] ata1: soft resetting port
[ 1.707578] done.
[ 1.707626] Enabling non-boot CPUs ...
[ 1.721958] SMP alternatives: switching to SMP code
[ 1.722167] Booting processor 1/1 eip 3000
[ 1.732455] Initializing CPU#1
[ 1.811605] Calibrating delay using timer specific routine.. 6134.70 BogoMIPS (lpj=12269413)
[ 1.811615] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
[ 1.811622] monitor/mwait feature present.
[ 1.811624] using mwait in idle threads.
[ 1.811630] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 1.811632] CPU: L2 cache: 1024K
[ 1.811635] CPU: Physical Processor ID: 0
[ 1.811637] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000651d 00000000 00000001
[ 1.811908] CPU1: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09
[ 1.815981] CPU1 is up
[ 2.159198] ata1.00: configured for UDMA/33
[ 2.159211] ata1: EH complete
[ 2.430799] 8139too Fast Ethernet driver 0.9.28
[ 2.430876] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 2.432893] eth0: RealTek RTL8139 at 0xf884e000, 00:14:85:72:6e:62, IRQ 21
[ 2.432900] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 2.455052] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 3.105620] input: Power Button (FF) as /class/
[ 3.106018] ACPI: Power Button (FF) [PWRF]
[ 3.106308] input: Power Button (CM) as /class/
[ 3.106607] ACPI: Power Button (CM) [PWRB]
[ 4.222208] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 4.222595] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 4.461778] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 8.036328] ata2: soft resetting port
[ 8.317879] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.437235] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.437245] ata2.00: configured for UDMA/133
[ 8.437254] ata2: EH pending after completion, repeating EH (cnt=4)
[ 8.437279] ata2: soft resetting port
[ 8.714464] ata2.01: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
[ 8.722434] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.742534] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.742541] ata2.00: configured for UDMA/133
[ 8.751815] ata2.01: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
[ 8.751820] ata2.01: configured for UDMA/133
[ 8.751827] ata2: EH complete
[ 8.752036] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 8.752188] sda: Write Protect is off
[ 8.752192] sda: Mode Sense: 00 3a 00 00
[ 8.752511] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.752772] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
[ 8.752902] sdb: Write Protect is off
[ 8.752905] sdb: Mode Sense: 00 3a 00 00
[ 8.753167] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.753548] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 8.753680] sda: Write Protect is off
[ 8.753683] sda: Mode Sense: 00 3a 00 00
[ 8.754944] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.755183] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
[ 8.755324] sdb: Write Protect is off
[ 8.755328] sdb: Mode Sense: 00 3a 00 00
[ 8.755675] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 25.553330] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 25.810371] ACPI: PCI interrupt for device 0000:02:05.0 disabled
[ 27.630092] PM: Preparing system for mem sleep
[ 27.630100] Disabling non-boot CPUs ...
[ 27.656433] CPU 1 is now offline
[ 27.656440] SMP alternatives: switching to UP code
[ 27.657654] CPU1 is down
[ 27.657659] Stopping tasks ... done.
[ 27.716282] Suspending console(s)
[ 27.716289] platform bluetooth: suspend
[ 27.716299] iTCO_wdt iTCO_wdt: suspend
[ 27.716305] sd 1:0:1:0: suspend
[ 27.716787] sd 1:0:0:0: suspend
[ 28.530867] sr 0:0:0:0: suspend
[ 28.530885] usbdev5.1_ep81: PM: suspend 0->2, parent 5-0:1.0 already 2
[ 28.530888] hub 5-0:1.0: PM: suspend 2-->2
[ 28.530889] hub 5-0:1.0: PM: suspend 2->2, parent usb5 already 2
[ 28.530892] usbdev5.1_ep00: PM: suspend 0->2, parent usb5 already 2
[ 28.530894] usb usb5: PM: suspend 2-->2
[ 28.530896] usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2
[ 28.530898] hub 4-0:1.0: PM: suspend 2-->2
[ 28.530900] hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2
[ 28.530902] usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2
[ 28.530904] usb usb4: PM: suspend 2-->2
[ 28.530906] usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2
[ 28.530908] hub 3-0:1.0: PM: suspend 2-->2
[ 28.530910] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2
[ 28.530912] usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2
[ 28.530913] usb usb3: PM: suspend 2-->2
[ 28.530916] usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2
[ 28.530918] hub 2-0:1.0: PM: suspend 2-->2
[ 28.530919] hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2
[ 28.530921] usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2
[ 28.530923] usb usb2: PM: suspend 2-->2
[ 28.530926] usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2
[ 28.530927] hub 1-0:1.0: PM: suspend 2-->2
[ 28.530929] hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2
[ 28.530931] usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2
[ 28.530933] usb usb1: PM: suspend 2-->2
[ 28.530935] platform vesafb.0: suspend
[ 28.530937] platform eisa.0: suspend
[ 28.530939] i8042 i8042: suspend
[ 29.431021] serial8250 serial8250: suspend
[ 29.431108] pci_express 0000:00:
[ 29.431111] pcspkr pcspkr: suspend
[ 29.431118] pnp 00:0d: suspend
[ 29.431120] system 00:0c: suspend
[ 29.431121] system 00:0b: suspend
[ 29.431123] system 00:0a: suspend
[ 29.431124] i8042 kbd 00:09: suspend
[ 29.431126] i8042 aux 00:08: suspend
[ 29.431128] parport_pc 00:07: suspend
[ 29.431362] pnp: Device 00:07 disabled.
[ 29.431365] serial 00:06: suspend
[ 29.431556] pnp: Device 00:06 disabled.
[ 29.431559] pnp 00:05: suspend
[ 29.431560] pnp 00:04: suspend
[ 29.431561] pnp 00:03: suspend
[ 29.431563] pnp 00:02: suspend
[ 29.431564] system 00:01: suspend
[ 29.431566] pnp 00:00: suspend
[ 29.431568] ohci1394 0000:02:07.0: suspend
[ 29.431570] ohci1394 does not fully support suspend and resume yet
[ 29.431572] ieee1394: hpsb_bus_reset called while bus reset already in progress
[ 29.449086] pci 0000:02:05.0: suspend
[ 29.449134] saa7134 0000:02:01.0: suspend
[ 29.449180] serial 0000:02:00.0: suspend
[ 29.465115] nvidia 0000:01:00.0: suspend
[ 29.465133] NVRM: RmPowerManagement: 3
[ 29.693574] pci 0000:00:1f.3: suspend
[ 29.693610] ata_piix 0000:00:1f.2: suspend
[ 29.694488] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 29.712647] pci 0000:00:1f.0: suspend
[ 29.712680] pci 0000:00:1e.0: suspend
[ 29.712717] ehci_hcd 0000:00:1d.7: suspend, may wakeup
[ 29.712780] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 29.728693] uhci_hcd 0000:00:1d.3: suspend
[ 29.728726] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 29.728728] uhci_hcd 0000:00:1d.2: suspend
[ 29.728758] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 29.728760] uhci_hcd 0000:00:1d.1: suspend
[ 29.728791] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 29.728792] uhci_hcd 0000:00:1d.0: suspend
[ 29.728823] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 29.728825] HDA Intel 0000:00:1b.0: suspend
[ 29.732710] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 29.748727] pcieport-driver 0000:00:01.0: suspend
[ 29.748775] agpgart-intel 0000:00:00.0: suspend
[ 29.748801] acpi acpi: suspend
[ 29.748811] PM: Entering mem sleep
[ 29.748814] platform bluetooth: LATE suspend
[ 29.748820] iTCO_wdt iTCO_wdt: LATE suspend
[ 29.748828] platform vesafb.0: LATE suspend
[ 29.748829] platform eisa.0: LATE suspend
[ 29.748831] i8042 i8042: LATE suspend
[ 29.748834] serial8250 serial8250: LATE suspend
[ 29.748917] pcspkr pcspkr: LATE suspend
[ 29.748922] ohci1394 0000:02:07.0: LATE suspend
[ 29.748924] pci 0000:02:05.0: LATE suspend
[ 29.748926] saa7134 0000:02:01.0: LATE suspend
[ 29.748928] serial 0000:02:00.0: LATE suspend
[ 29.748929] nvidia 0000:01:00.0: LATE suspend
[ 29.748931] pci 0000:00:1f.3: LATE suspend
[ 29.748932] pci 0000:00:1f.0: LATE suspend
[ 29.748934] pci 0000:00:1e.0: LATE suspend
[ 29.748935] HDA Intel 0000:00:1b.0: LATE suspend
[ 29.748937] pcieport-driver 0000:00:01.0: LATE suspend
[ 29.748939] agpgart-intel 0000:00:00.0: LATE suspend
[ 0.399261] Back to C!
[ 0.399544] agpgart-intel 0000:00:00.0: EARLY resume
[ 0.399548] pcieport-driver 0000:00:01.0: EARLY resume
[ 0.399550] HDA Intel 0000:00:1b.0: EARLY resume
[ 0.399552] uhci_hcd 0000:00:1d.0: EARLY resume
[ 0.399554] uhci_hcd 0000:00:1d.1: EARLY resume
[ 0.399556] uhci_hcd 0000:00:1d.2: EARLY resume
[ 0.399557] uhci_hcd 0000:00:1d.3: EARLY resume
[ 0.399559] ehci_hcd 0000:00:1d.7: EARLY resume
[ 0.399561] pci 0000:00:1e.0: EARLY resume
[ 0.399563] pci 0000:00:1f.0: EARLY resume
[ 0.399565] ata_piix 0000:00:1f.2: EARLY resume
[ 0.399566] pci 0000:00:1f.3: EARLY resume
[ 0.399568] nvidia 0000:01:00.0: EARLY resume
[ 0.399570] serial 0000:02:00.0: EARLY resume
[ 0.399572] saa7134 0000:02:01.0: EARLY resume
[ 0.399573] pci 0000:02:05.0: EARLY resume
[ 0.399575] ohci1394 0000:02:07.0: EARLY resume
[ 0.399580] pcspkr pcspkr: EARLY resume
[ 0.399646] serial8250 serial8250: EARLY resume
[ 0.399649] i8042 i8042: EARLY resume
[ 0.399650] platform eisa.0: EARLY resume
[ 0.399652] platform vesafb.0: EARLY resume
[ 0.399659] iTCO_wdt iTCO_wdt: EARLY resume
[ 0.399664] platform bluetooth: EARLY resume
[ 0.399666] PM: Finishing wakeup.
[ 0.399670] acpi acpi: resuming
[ 0.399678] agpgart-intel 0000:00:00.0: resuming
[ 0.399711] pcieport-driver 0000:00:01.0: resuming
[ 0.399728] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 200000f0)
[ 0.399751] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.399755] HDA Intel 0000:00:1b.0: resuming
[ 0.415557] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 105)
[ 0.415574] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing f0100004)
[ 0.415578] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 8)
[ 0.415584] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[ 0.415607] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.415614] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 0.472481] uhci_hcd 0000:00:1d.0: resuming
[ 0.472485] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 0.472492] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 0.472537] usb usb1: root hub lost power or was reset
[ 0.472552] uhci_hcd 0000:00:1d.1: resuming
[ 0.472556] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.472562] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 0.472605] usb usb2: root hub lost power or was reset
[ 0.472618] uhci_hcd 0000:00:1d.2: resuming
[ 0.472621] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 0.472627] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 0.472669] usb usb3: root hub lost power or was reset
[ 0.472683] uhci_hcd 0000:00:1d.3: resuming
[ 0.472685] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 0.472691] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 0.472734] usb usb4: root hub lost power or was reset
[ 0.472747] ehci_hcd 0000:00:1d.7: resuming
[ 0.488510] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 0.488518] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 0.488568] pci 0000:00:1e.0: resuming
[ 0.488608] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.488611] pci 0000:00:1f.0: resuming
[ 0.488641] ata_piix 0000:00:1f.2: resuming
[ 0.504560] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005)
[ 0.504577] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 0.504582] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 0.505728] pci 0000:00:1f.3: resuming
[ 0.505759] nvidia 0000:01:00.0: resuming
[ 0.505768] NVRM: RmPowerManagement: 4
[ 0.649707] serial 0000:02:00.0: resuming
[ 0.664404] PM: Writing back config space on device 0000:02:00.0 at offset f (was 3e010100, writing 3e010103)
[ 0.664423] PM: Writing back config space on device 0000:02:00.0 at offset 5 (was 1, writing a001)
[ 0.664429] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 0, writing f0007000)
[ 0.664434] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 2008)
[ 0.664441] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2900080, writing 2900087)
[ 0.664462] saa7134 0000:02:01.0: resuming
[ 0.664471] PM: Writing back config space on device 0000:02:01.0 at offset f (was 20540100, writing 2054010b)
[ 0.664490] PM: Writing back config space on device 0000:02:01.0 at offset 4 (was 0, writing f0004000)
[ 0.664495] PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 2000)
[ 0.664501] PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2900000, writing 2900006)
[ 0.664530] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 0.664537] pci 0000:02:05.0: resuming
[ 0.664560] PM: Writing back config space on device 0000:02:05.0 at offset 5 (was 0, writing f0005000)
[ 0.664565] PM: Writing back config space on device 0000:02:05.0 at offset 4 (was 1, writing a401)
[ 0.664570] PM: Writing back config space on device 0000:02:05.0 at offset 3 (was 0, writing 2000)
[ 0.664577] PM: Writing back config space on device 0000:02:05.0 at offset 1 (was 2900000, writing 2900003)
[ 0.664593] ohci1394 0000:02:07.0: resuming
[ 0.680431] PM: Writing back config space on device 0000:02:07.0 at offset f (was 4020100, writing 4020109)
[ 0.680450] PM: Writing back config space on device 0000:02:07.0 at offset 5 (was 0, writing f0000000)
[ 0.680455] PM: Writing back config space on device 0000:02:07.0 at offset 4 (was 0, writing f0006000)
[ 0.680460] PM: Writing back config space on device 0000:02:07.0 at offset 3 (was 0, writing 2008)
[ 0.680467] PM: Writing back config space on device 0000:02:07.0 at offset 1 (was 2100000, writing 2100006)
[ 0.730045] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f0006000-
[ 0.730067] pnp 00:00: resuming
[ 0.730069] system 00:01: resuming
[ 0.730070] pnp 00:02: resuming
[ 0.730072] pnp 00:03: resuming
[ 0.730073] pnp 00:04: resuming
[ 0.730074] pnp 00:05: resuming
[ 0.730076] serial 00:06: resuming
[ 0.730905] pnp: Device 00:06 activated.
[ 0.730908] parport_pc 00:07: resuming
[ 0.731960] pnp: Device 00:07 activated.
[ 0.731963] i8042 aux 00:08: resuming
[ 0.732083] pnp: Failed to activate device 00:08.
[ 0.732085] i8042 kbd 00:09: resuming
[ 0.732094] pnp: Failed to activate device 00:09.
[ 0.732096] system 00:0a: resuming
[ 0.732097] system 00:0b: resuming
[ 0.732099] system 00:0c: resuming
[ 0.732100] pnp 00:0d: resuming
[ 0.732103] pcspkr pcspkr: resuming
[ 0.732106] pci_express 0000:00:
[ 0.732197] serial8250 serial8250: resuming
[ 0.732202] i8042 i8042: resuming
[ 0.732632] atkbd serio0: resuming
[ 0.770758] platform eisa.0: resuming
[ 0.770761] psmouse serio1: resuming
[ 1.506425] platform vesafb.0: resuming
[ 1.506428] usb usb1: resuming
[ 1.546761] usb usb2: resuming
[ 1.586832] usb usb3: resuming
[ 1.626904] usb usb4: resuming
[ 1.666977] usbdev5.1_ep00: PM: resume from 0, parent usb5 still 2
[ 1.666980] usbdev5.1_ep81: PM: resume from 0, parent 5-0:1.0 still 2
[ 1.666983] sr 0:0:0:0: resuming
[ 1.666989] sd 1:0:0:0: resuming
[ 1.670038] sd 1:0:1:0: resuming
[ 1.670046] iTCO_wdt iTCO_wdt: resuming
[ 1.670054] platform bluetooth: resuming
[ 1.670810] Restarting tasks ... <6>ata1: EH pending after completion, repeating EH (cnt=4)
[ 1.671080] ata1: soft resetting port
[ 1.711672] done.
[ 1.711720] Enabling non-boot CPUs ...
[ 1.735071] SMP alternatives: switching to SMP code
[ 1.735262] Booting processor 1/1 eip 3000
[ 1.745545] Initializing CPU#1
[ 1.823835] Calibrating delay using timer specific routine.. 6134.65 BogoMIPS (lpj=12269319)
[ 1.823845] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
[ 1.823852] monitor/mwait feature present.
[ 1.823854] using mwait in idle threads.
[ 1.823860] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 1.823862] CPU: L2 cache: 1024K
[ 1.823865] CPU: Physical Processor ID: 0
[ 1.823867] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000651d 00000000 00000001
[ 1.824138] CPU1: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09
[ 1.832213] CPU1 is up
[ 2.154304] ata1.00: configured for UDMA/33
[ 2.154315] ata1: EH complete
[ 2.447106] 8139too Fast Ethernet driver 0.9.28
[ 2.447285] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 2.448074] eth0: RealTek RTL8139 at 0xf884e000, 00:14:85:72:6e:62, IRQ 21
[ 2.448080] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 2.478970] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 2.602431] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 3.517379] input: Power Button (FF) as /class/
[ 3.517666] ACPI: Power Button (FF) [PWRF]
[ 3.517897] input: Power Button (CM) as /class/
[ 3.518136] ACPI: Power Button (CM) [PWRB]
[ 4.601913] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 4.602308] ACPI: Processor [CPU1] (supports 2 throttling states)
[ 7.999692] ata2: soft resetting port
[ 8.281335] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.401897] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.401907] ata2.00: configured for UDMA/133
[ 8.401915] ata2: EH pending after completion, repeating EH (cnt=4)
[ 8.401942] ata2: soft resetting port
[ 8.675124] ata2.01: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
[ 8.683095] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.707211] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 8.707221] ata2.00: configured for UDMA/133
[ 8.716533] ata2.01: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
[ 8.716538] ata2.01: configured for UDMA/133
[ 8.716545] ata2: EH complete
[ 8.716813] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 8.716972] sda: Write Protect is off
[ 8.716977] sda: Mode Sense: 00 3a 00 00
[ 8.717238] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.717593] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
[ 8.717954] sdb: Write Protect is off
[ 8.717959] sdb: Mode Sense: 00 3a 00 00
[ 8.718128] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.718425] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 8.719511] sda: Write Protect is off
[ 8.719516] sda: Mode Sense: 00 3a 00 00
[ 8.719754] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.720096] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
[ 8.720263] sdb: Write Protect is off
[ 8.720266] sdb: Mode Sense: 00 3a 00 00
[ 8.720563] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 62.132082] eth0: no IPv6 routers present
cat /proc/interrupts <RET>
CPU0 CPU1
0: 10181345 0 IO-APIC-edge timer
1: 14919 0 IO-APIC-edge i8042
7: 0 0 IO-APIC-edge parport0
8: 10 0 IO-APIC-edge rtc
9: 1 0 IO-APIC-fasteoi acpi
12: 1131050 0 IO-APIC-edge i8042
14: 447070 0 IO-APIC-edge libata
15: 210088 0 IO-APIC-edge libata
16: 3632688 0 IO-APIC-fasteoi uhci_hcd:usb4, nvidia, HDA Intel
18: 3 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5, ohci1394
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb2, saa7133[0], saa7133[0]
20: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
21: 585957 0 IO-APIC-fasteoi eth0
NMI: 0 0
LOC: 10138949 10132896
ERR: 0
MIS: 0
Regards,
Wayne Clendennen.
Question information
- Language:
- English Edit question
- Status:
- Answered
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
Can you help with this problem?
Provide an answer of your own, or ask Clendee for more information if necessary.
