sound muted at start, no sound in Rthythmbox/vlc/real player - is obvious or bug?

I thought I had Alsa working but now I have no sound on my Novatech-680 . After some updates in Ubuntu 8.10 about 14 days ago, having before got it to play CDs on vlc and record/extract in Rhythmbox, using Alsa rather than Pulseaudio, my sound died. I have checked many posts and followed their instructions to no successful end.

I updated to Jaunty from 8.10. in the hope that it would clear any false settings. No.

I then read through and did everything here http://ubuntuforums.org/showthread.php?t=843012

Why I had to revert to Pulseaudio when I thought Alsa was the better/successor to Pa, which never worked in 8.10 is beyond me... (Having installed pavdevchooser.) Volume control is muted on boot or restart.

After following all the steps in http://ubuntuforums.org/showthread.php?t=843012 I put in these requests singly on terminal. (Having installed pavdevchooser.) Volume control is muted on boot or restart.I have to override an "Open Rhythmbox" panel if I try to play discs etc. in vlc. Rthythmbox has to be forced to quit and comes up when I go to Systems>Home folder, instead of the folder.

lsusb

cat /proc/asound/cards

cat /proc/asound/modules

aplay -l

arecord -l

  From the post above, I understand that SIS966 is a card that is not “liked” by pulseaudio. It seems also there is something like a conflict between alsa and pulseaudio when they load at boot. But haven't I got rid of Alsa? I got this list of sound hardware, cards etc.

lsusb

Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device

Bus 001 Device 003: ID 090c:1000 Feiya Technology Corp. Memory Bar

Bus 001 Device 002: ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

cat /proc/asound/cards

 0 [SIS966 ]: HDA-Intel - HDA SIS966

                      HDA SIS966 at 0xb0100000 irq 4

cat /proc/asound/modules

 0 snd_hda_intel

aplay -l

**** List of PLAYBACK Hardware Devices ****

card 0: SIS966 [HDA SIS966], device 0: ALC662 Analog [ALC662 Analog]

  Subdevices: 1/1

  Subdevice #0: subdevice #0

arecord -l

**** List of CAPTURE Hardware Devices ****

card 0: SIS966 [HDA SIS966], device 0: ALC662 Analog [ALC662 Analog]

  Subdevices: 1/1

  Subdevice #0: subdevice #0

Does anyone have any ideas? I have been up one wall, across the ceiling, down again about six times a day. Two weeks and no music!

While waiting I did this in terminal:

martinc@martinc-laptop:~$ killall pulseaudio

martinc@martinc-laptop:~$ pulseaudio -vvv
This gave the lot below at *, I read through it, spotted the mention of pulse-rt and ?fault of no alsa mixer or no front. I did adduser in terminal for pulse etc. I tried to install alsamixer – although Synaptic says it's installed and got this -martinc@martinc-laptop:~$ sudo apt-get install alsamixer

Reading package lists... Done

Building dependency tree

Reading state information... Done

E: Couldn't find package alsamixer

martinc@martinc-laptop:~$ sudo apt-get install alsa-mixer

Reading package lists... Done

Building dependency tree

Reading state information... Done

E: Couldn't find package alsa-mixer .

*I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.

I: caps.c: Dropping root privileges.

I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.

D: main.c: Started as real root: no, suid root: yes

I: main.c: PolicyKit refuses acquire-high-priority privilege.

N: main.c: Called SUID root and real-time and/or high-priority scheduling was requested in the configuration. However, we lack the necessary privileges:

N: main.c: We are not in group 'pulse-rt', PolicyKit refuse to grant us the requested privileges and we have no increase RLIMIT_NICE/RLIMIT_RTPRIO resource limits.

N: main.c: For enabling real-time/high-priority scheduling please acquire the appropriate PolicyKit privileges, or become a member of 'pulse-rt', or increase the RLIMIT_NICE/RLIMIT_RTPRIO resource limits for this user.

I: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted

I: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted

D: main.c: Can realtime: no, can high-priority: no

D: main.c: Can realtime: no, can high-priority: no

I: main.c: This is PulseAudio 0.9.14

D: main.c: Compilation host: x86_64-pc-linux-gnu

D: main.c: Compilation CFLAGS: -g -O2 -g -Wall -O3 -Wall -W -Wextra -pedantic -pipe -Wno-long-long -Wvla -Wno-overlength-strings -Wconversion -Wundef -Wformat -Wlogical-op -Wpacked -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wold-style-definition -Wdeclaration-after-statement -Wfloat-equal -Wmissing-declarations -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-noreturn -Wshadow -Wendif-labels -Wpointer-arith -Wcast-align -Wwrite-strings -Wno-unused-parameter -ffast-math

D: main.c: Running on host: Linux x86_64 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:58:03 UTC 2009

I: main.c: Page size is 4096 bytes

D: main.c: Compiled with Valgrind support: no

D: main.c: Running in valgrind mode: no

D: main.c: Optimized build: yes

I: main.c: Machine ID is 6800bd1e08f362d200a79d334943fdc7.

I: main.c: Using runtime directory /home/martinc/.pulse/6800bd1e08f362d200a79d334943fdc7:runtime.

I: main.c: Using state directory /home/martinc/.pulse.

I: main.c: Running in system mode: no

I: main.c: Fresh high-resolution timers available! Bon appetit!

D: memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472

D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9/modules/module-gconf.so': success

D: module-gconf.c: Loading module 'module-combine' with args '' due to GConf configuration.

I: sink.c: Created sink 0 "combined" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right

I: source.c: Created source 0 "combined.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right

D: module-combine.c: Thread starting up

D: rtpoll.c: Acquired POSIX realtime signal SIGRTMIN+29

I: module.c: Loaded "module-combine" (index: #0; argument: "").

D: module-gconf.c: Loading module 'module-rtp-recv' with args '' due to GConf configuration.

E: module.c: Failed to open module "module-rtp-recv": file not found

E: module-gconf.c: pa_module_load() failed

D: module-gconf.c: Loading module 'module-rtp-send' with args 'source=@DEFAULT_MONITOR@ loop=0' due to GConf configuration.

I: resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.

I: resampler.c: Using resampler 'copy'

I: resampler.c: Using s16le as working format.

D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0

D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0

I: source-output.c: Created output 0 "RTP Monitor Stream" on combined.monitor with sample spec s16be 2ch 44100Hz and channel map front-left,front-right

D: memblockq.c: memblockq requested: maxlength=174080, tlength=174080, base=4, prebuf=1, minreq=0 maxrewind=0

D: memblockq.c: memblockq sanitized: maxlength=174080, tlength=174080, base=4, prebuf=4, minreq=4 maxrewind=0

I: module-rtp-send.c: RTP stream initialized with mtu 1280 on 224.0.0.56:46174 ttl=1, SSRC=0xab45fda8, payload=10, initial sequence #23022

I: module-rtp-send.c: SDP-Data:

I: module-rtp-send.c: v=0

I: module-rtp-send.c: o=martinc 3450023210 0 IN IP4 192.168.1.100

I: module-rtp-send.c: s=PulseAudio RTP Stream on martinc-laptop

I: module-rtp-send.c: c=IN IP4 224.0.0.56

I: module-rtp-send.c: t=3450023210 0

I: module-rtp-send.c: a=recvonly

I: module-rtp-send.c: m=audio 46174 RTP/AVP 10

I: module-rtp-send.c: a=rtpmap:10 L16/44100/2

I: module-rtp-send.c: a=type:broadcast

I: module-rtp-send.c: EOF

I: module.c: Loaded "module-rtp-send" (index: #1; argument: "source=@DEFAULT_MONITOR@ loop=0").

D: module-gconf.c: Loading module 'module-native-protocol-tcp' with args '' due to GConf configuration.

I: module.c: Loaded "module-native-protocol-tcp" (index: #2; argument: "").

D: module-gconf.c: Loading module 'module-esound-protocol-tcp' with args '' due to GConf configuration.

I: module.c: Loaded "module-esound-protocol-tcp" (index: #3; argument: "").

D: module-gconf.c: Loading module 'module-zeroconf-discover' with args '' due to GConf configuration.

I: module.c: Loaded "module-zeroconf-discover" (index: #4; argument: "").

I: module.c: Loaded "module-gconf" (index: #5; argument: "").

D: module-suspend-on-idle.c: Sink combined becomes idle.

I: module.c: Loaded "module-suspend-on-idle" (index: #6; argument: "").

I: module-device-restore.c: Sucessfully opened database file '/home/martinc/.pulse/6800bd1e08f362d200a79d334943fdc7:device-volumes.x86_64-pc-linux-gnu.gdbm'.

I: module.c: Loaded "module-device-restore" (index: #7; argument: "").

I: module-stream-restore.c: Sucessfully opened database file '/home/martinc/.pulse/6800bd1e08f362d200a79d334943fdc7:stream-volumes.x86_64-pc-linux-gnu.gdbm'.

I: module-stream-restore.c: Storing volume/mute/device for stream source-output-by-media-name:RTP Monitor Stream.

I: module.c: Loaded "module-stream-restore" (index: #8; argument: "").

D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9/modules/module-hal-detect.so': success

I: module-hal-detect.c: Trying capability alsa

D: module-hal-detect.c: Not loaded device /org/freedesktop/Hal/devices/computer_alsa_timer

D: module-hal-detect.c: Not loaded device /org/freedesktop/Hal/devices/computer_alsa_sequencer

D: module-hal-detect.c: Loading module-alsa-sink with arguments 'device_id=0 sink_name=alsa_output.pci_1039_7502_sound_card_0_alsa_playback_0 tsched=0'

D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...

I: module-alsa-sink.c: Successfully opened device front:0.

I: module-alsa-sink.c: Successfully enabled mmap() mode.

I: (alsa-lib)control.c: Invalid CTL front:0

I: alsa-util.c: Unable to attach to mixer front:0: No such file or directory

I: alsa-util.c: Successfully attached to mixer 'hw:0'

I: alsa-util.c: Using mixer control "Master".

I: module-device-restore.c: Restoring volume for sink alsa_output.pci_1039_7502_sound_card_0_alsa_playback_0.

I: module-device-restore.c: Restoring mute state for sink alsa_output.pci_1039_7502_sound_card_0_alsa_playback_0.

I: sink.c: Created sink 1 "alsa_output.pci_1039_7502_sound_card_0_alsa_playback_0" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right

I: module-device-restore.c: Restoring volume for source alsa_output.pci_1039_7502_sound_card_0_alsa_playback_0.monitor.

I: module-device-restore.c: Restoring mute state for source alsa_output.pci_1039_7502_sound_card_0_alsa_playback_0.monitor.

I: source.c: Created source 1 "alsa_output.pci_1039_7502_sound_card_0_alsa_playback_0.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right

I: module-alsa-sink.c: Using 8 fragments of size 1792 bytes, buffer time is 81.27ms

D: module-alsa-sink.c: hwbuf_unused=0

D: module-alsa-sink.c: setting avail_min=1

I: module-alsa-sink.c: Volume ranges from 0 to 64.

I: module-alsa-sink.c: Volume ranges from -64.00 dB to 0.00 dB.

I: alsa-util.c: ALSA device lacks independant volume controls for each channel.

I: module-alsa-sink.c: Using hardware volume control. Hardware dB scale supported.

D: alsa-util.c: snd_pcm_dump():

D: alsa-util.c: Soft volume PCM

D: alsa-util.c: Control: PCM Playback Volume

D: alsa-util.c: min_dB: -51

D: alsa-util.c: max_dB: 0

D: alsa-util.c: resolution: 256

D: alsa-util.c: Its setup is:

D: alsa-util.c: stream : PLAYBACK

D: alsa-util.c: access : MMAP_INTERLEAVED

D: alsa-util.c: format : S16_LE

D: alsa-util.c: subformat : STD

D: alsa-util.c: channels : 2

D: alsa-util.c: rate : 44100

D: alsa-util.c: exact rate : 44100 (44100/1)

D: alsa-util.c: msbits : 16

D: alsa-util.c: buffer_size : 3584

D: alsa-util.c: period_size : 448

D: alsa-util.c: period_time : 10158

D: alsa-util.c: tstamp_mode : ENABLE

D: alsa-util.c: period_step : 1

D: alsa-util.c: avail_min : 448

D: alsa-util.c: period_event : 0

D: alsa-util.c: start_threshold : -1

D: alsa-util.c: stop_threshold : 8070450532247928832

D: alsa-util.c: silence_threshold: 0

D: alsa-util.c: silence_size : 0

D: alsa-util.c: boundary : 8070450532247928832

D: alsa-util.c: Slave: Hardware PCM card 0 'HDA SIS966' device 0 subdevice 0

D: alsa-util.c: Its setup is:

D: alsa-util.c: stream : PLAYBACK

D: alsa-util.c: access : MMAP_INTERLEAVED

D: alsa-util.c: format : S16_LE

D: alsa-util.c: subformat : STD

D: alsa-util.c: channels : 2

D: alsa-util.c: rate : 44100

D: alsa-util.c: exact rate : 44100 (44100/1)

D: alsa-util.c: msbits : 16

D: alsa-util.c: buffer_size : 3584

D: alsa-util.c: period_size : 448

D: alsa-util.c: period_time : 10158

D: alsa-util.c: tstamp_mode : ENABLE

D: alsa-util.c: period_step : 1

D: alsa-util.c: avail_min : 448

D: alsa-util.c: period_eve

D: module-alsa-sink.c: Thread starting up

D: rtpoll.c: Acquired POSIX realtime signal SIGRTMIN+28

D: module-alsa-sink.c: Requested volume: 0: 100% 1: 100%

D: module-alsa-sink.c: Got hardware volume: 0: 100% 1: 100%

D: module-alsa-sink.c: Calculated software volume: 0: 100% 1: 100%

I: module-alsa-sink.c: Starting playback.

D: module-suspend-on-idle.c: Source alsa_output.pci_1039_7502_sound_card_0_alsa_playback_0.monitor becomes idle.

D: module-suspend-on-idle.c: Sink alsa_output.pci_1039_7502_sound_card_0_alsa_playback_0 becomes idle.

I: module-combine.c: Configuring new sink: alsa_output.pci_1039_7502_sound_card_0_alsa_playback_0

D: memblockq.c: memblockq requested: maxlength=16777216, tlength=16777216, base=4, prebuf=1, minreq=0 maxrewind=0

D: memblockq.c: memblockq sanitized: maxlength=16777216, tlength=16777216, base=4, prebuf=4, minreq=4 maxrewind=0

I: module-stream-restore.c: Not restore device for stream sink-input-by-media-role:filter, because already set.

I: module-stream-restore.c: Restoring volume for sink input sink-input-by-media-role:filter.

I: module-stream-restore.c: Restoring mute state for sink input sink-input-by-media-role:filter.

D: module-suspend-on-idle.c: Sink alsa_output.pci_1039_7502_sound_card_0_alsa_playback_0 becomes busy.

I: resampler.c: Using resampler 'trivial'

I: resampler.c: Using s16le as working format.

D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0

D: memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0

I: sink-input.c: Created input 0 "Simultaneous output on HDA SIS966 - ALC662 Analog" on alsa_output.pci_1039_7502_sound_card_0_alsa_playback_0 with sample spec s16le 2ch 44100Hz and channel map front-left,front-right

D: module-alsa-sink.c: hwbuf_unused=0

D: module-alsa-sink.c: setting avail_min=1

I: module.c: Loaded "module-alsa-sink" (index: #9; argument: "device_id=0 sink_name=alsa_output.pci_1039_7502_sound_card_0_alsa_playback_0 tsched=0").

D: module-hal-detect.c: Loading module-alsa-source with arguments 'device_id=0 source_name=alsa_input.pci_1039_7502_sound_card_0_alsa_capture_0 tsched=0'

D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...

I: module-alsa-source.c: Successfully opened device front:0.

I: module-alsa-source.c: Successfully enabled mmap() mode.

I: (alsa-lib)control.c: Invalid CTL front:0

I: alsa-util.c: Unable to attach to mixer front:0: No such file or directory

I: alsa-util.c: Successfully attached to mixer 'hw:0'

I: alsa-util.c: Using mixer control "Capture".

I: module-device-restore.c: Restoring volume for source alsa_input.pci_1039_7502_sound_card_0_alsa_capture_0.

I: module-device-restore.c: Restoring mute state for source alsa_input.pci_1039_7502_sound_card_0_alsa_capture_0.

I: source.c: Created source 2 "alsa_input.pci_1039_7502_sound_card_0_alsa_capture_0" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right

I: module-alsa-source.c: Using 8 fragments of size 1792 bytes, buffer time is 81.27ms

D: module-alsa-source.c: hwbuf_unused=0

D: module-alsa-source.c: setting avail_min=1

I: module-alsa-source.c: Volume ranges from 0 to 31.

I: module-alsa-source.c: Volume ranges from -13.50 dB to 33.00 dB.

I: alsa-util.c: All 2 channels can be mapped to mixer channels.

I: module-alsa-source.c: Using hardware volume control. Hardware dB scale supported.

D: alsa-util.c: snd_pcm_dump():

D: alsa-util.c: Soft volume PCM

D: alsa-util.c: Control: PCM Playback Volume

D: alsa-util.c: min_dB: -51

D: alsa-util.c: max_dB: 0

D: alsa-util.c: resolution: 256

D: alsa-util.c: Its setup is:

D: alsa-util.c: stream : CAPTURE

D: alsa-util.c: access : MMAP_INTERLEAVED

D: alsa-util.c: format : S16_LE

D: alsa-util.c: subformat : STD

D: alsa-util.c: channels : 2

D: alsa-util.c: rate : 44100

D: alsa-util.c: exact rate : 44100 (44100/1)

D: alsa-util.c: msbits : 16

D: alsa-util.c: buffer_size : 3584

D: alsa-util.c: period_size : 448

D: alsa-util.c: period_time : 10158

D: alsa-util.c: tstamp_mode : ENABLE

D: alsa-util.c: period_step : 1

D: alsa-util.c: avail_min : 448

D: alsa-util.c: period_event : 0

D: alsa-util.c: start_threshold : -1

D: alsa-util.c: stop_threshold : 8070450532247928832

D: alsa-util.c: silence_threshold: 0

D: alsa-util.c: silence_size : 0

D: alsa-util.c: boundary : 8070450532247928832

D: alsa-util.c: Slave: Hardware PCM card 0 'HDA SIS966' device 0 subdevice 0

D: alsa-util.c: Its setup is:

D: alsa-util.c: stream : CAPTURE

D: alsa-util.c: access : MMAP_INTERLEAVED

D: alsa-util.c: format : S16_LE

D: alsa-util.c: subformat : STD

D: alsa-util.c: channels : 2

D: alsa-util.c: rate : 44100

D: alsa-util.c: exact rate : 44100 (44100/1)

D: alsa-util.c: msbits : 16

D: alsa-util.c: buffer_size : 3584

D: alsa-util.c: period_size : 448

D: alsa-util.c: period_time : 10158

D: alsa-util.c: tstamp_mode : ENABLE

D: alsa-util.c: period_step : 1

D: alsa-util.c: avail_min : 448

D: alsa-util.c: period_event

D: module-alsa-source.c: Thread starting up

D: rtpoll.c: Acquired POSIX realtime signal SIGRTMIN+27

D: module-alsa-source.c: Requested volume: 0: 100% 1: 100%

D: module-alsa-source.c: Got hardware volume: 0: 100% 1: 100%

D: module-alsa-source.c: Calculated software volume: 0: 100% 1: 100%

D: module-suspend-on-idle.c: Source alsa_input.pci_1039_7502_sound_card_0_alsa_capture_0 becomes idle.

I: module.c: Loaded "module-alsa-source" (index: #10; argument: "device_id=0 source_name=alsa_input.pci_1039_7502_sound_card_0_alsa_capture_0 tsched=0").

D: module-hal-detect.c: Not loaded device /org/freedesktop/Hal/devices/pci_1039_7502_sound_card_0_alsa_control__1

I: module-hal-detect.c: Loaded 2 modules.

I: module.c: Loaded "module-hal-detect" (index: #11; argument: "tsched=0").

D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9/modules/module-esound-protocol-unix.so': success

I: module.c: Loaded "module-esound-protocol-unix" (index: #12; argument: "").

I: module.c: Loaded "module-native-protocol-unix" (index: #13; argument: "").

I: module-default-device-restore.c: Manually configured default sink, not overwriting.

I: module-default-device-restore.c: Restored default source 'alsa_input.pci_1039_7502_sound_card_0_alsa_capture_0'.

I: module.c: Loaded "module-default-device-restore" (index: #14; argument: "").

I: module.c: Loaded "module-rescue-streams" (index: #15; argument: "").

I: module.c: Loaded "module-always-sink" (index: #16; argument: "").

I: client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session2"

D: module-console-kit.c: Added new session /org/freedesktop/ConsoleKit/Session2

I: module.c: Loaded "module-console-kit" (index: #17; argument: "").

I: module.c: Loaded "module-position-event-sounds" (index: #18; argument: "").

I: main.c: Daemon startup complete.

D: module-hal-detect.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired

D: module-console-kit.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired

I: module-suspend-on-idle.c: Sink combined idle for too long, suspending ...

D: module-alsa-sink.c: hwbuf_unused=0

D: module-alsa-sink.c: setting avail_min=1

D: module-suspend-on-idle.c: Sink alsa_output.pci_1039_7502_sound_card_0_alsa_playback_0 becomes idle.

D: module-suspend-on-idle.c: Sink alsa_output.pci_1039_7502_sound_card_0_alsa_playback_0 becomes idle.

I: sink-input.c: Freeing input 0 "Simultaneous output on HDA SIS966 - ALC662 Analog"

I: module-combine.c: Device suspended...

I: module-suspend-on-idle.c: Source alsa_output.pci_1039_7502_sound_card_0_alsa_playback_0.monitor idle for too long, suspending ...

I: module-suspend-on-idle.c: Source alsa_input.pci_1039_7502_sound_card_0_alsa_capture_0 idle for too long, suspending ...

I: module-alsa-source.c: Device suspended...

I: module-suspend-on-idle.c: Sink alsa_output.pci_1039_7502_sound_card_0_alsa_playback_0 idle for too long, suspending ...

I: module-alsa-sink.c: Device suspended...

I: module-stream-restore.c: Synced.

D: module-hal-detect.c: dbus: interface=org.freedesktop.Hal.Device, path=/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0, member=PropertyModified

D: module-console-kit.c: dbus: interface=org.freedesktop.Hal.Device, path=/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0, member=PropertyModified

I hope it will be something glaringly obvious.