Codec + Mixer: Realtek ALC887 -amixer: Mixer load hw:0 error: Invalid argument -> /sbin/alsactl: get_control:250: Cannot read control info '2,0,0,Front Playback Volume,0': Invalid argument -> Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 1002:4383 not working on Gigabyte GA-78LMT-USB3 in Ubuntu 10.04.4 LTS
Was using Asus M2N68-CM mbb. Changed to Gigabyte GA-78LMT-USB3 (rev. 4.1). Now there is no sound from the speakers. What can I do?
I did a hwinfo --sound and got this:
23: PCI 14.2: 0403 Audio device
[Created at pci.318]
UDI: /org/freedeskto
Unique ID: 5Dex.9zCmC9gVD38
SysFS ID: /devices/
SysFS BusID: 0000:00:14.2
Hardware Class: sound
Model: "ATI SBx00 Azalia (Intel HDA)"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4383 "SBx00 Azalia (Intel HDA)"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0xa002
Driver: "HDA Intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xfe024000-
IRQ: 16 (40633 events)
Module Alias: "pci:v00001002d
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=new, avail=yes, need=no, active=unknown
33: PCI 105.1: 0403 Audio device
[Created at pci.318]
UDI: /org/freedeskto
Unique ID: l4dC.vfAxXUx5zd4
Parent ID: vSkL.6mrh5CJscD0
SysFS ID: /devices/
SysFS BusID: 0000:01:05.1
Hardware Class: sound
Model: "ATI RS780 Azalia controller"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x960f "RS780 Azalia controller"
SubVendor: pci 0x1002 "ATI Technologies Inc"
SubDevice: pci 0x960f
Driver: "HDA Intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xfdafc000-
IRQ: 19 (116476 events)
Module Alias: "pci:v00001002d
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #10 (PCI bridge)
Do not know what to do now. Help!
Question information
- Language:
- English Edit question
- Status:
- Solved
- Assignee:
- No assignee Edit question
- Solved by:
- Mark Rijckenberg
- Solved:
- Last query:
- Last reply:
Related bugs
Related FAQ:
None Link to a FAQ
Revision history for this message
|
#1 |
killall pulseaudio; rm -r ~/.pulse*
Wait 10 seconds and reboot
Revision history for this message
|
#2 |
Did the killall thingie... Still no sound
Revision history for this message
|
#3 |
Please execute step 2, then send us the full terminal output from step 3
and step 4 from this procedure:
https:/
Revision history for this message
|
#4 |
Did the wget... step. Result is:-
--2013-01-04 19:27:48-- http://
Resolving www.alsa-
Connecting to www.alsa-
HTTP request sent, awaiting response... 302 Found
Location: http://
--2013-01-04 19:27:48-- http://
Resolving git.alsa-
Connecting to git.alsa-
HTTP request sent, awaiting response... 200 OK
Length: unspecified [application/x-sh]
Saving to: `alsa-info.sh'
[ <=> ] 27,785 --.-K/s in 0.1s
2013-01-04 19:27:48 (225 KB/s) - `alsa-info.sh' saved [27785]
ALSA Information Script v 0.4.61
-------
This script visits the following commands/files to collect diagnostic
information about your ALSA installation and sound related hardware.
dmesg
lspci
lsmod
aplay
amixer
alsactl
/proc/asound/
/sys/class/sound/
~/.asoundrc (etc.)
See './alsa-info.sh --help' for command line options.
/sbin/alsactl: get_control:250: Cannot read control info '2,0,0,Front Playback Volume,0': Invalid argument
cat: /tmp/alsa-
Automatically upload ALSA information to www.alsa-
Uploading information to www.alsa-
Your ALSA information is located at http://
Please inform the person helping you.
Revision history for this message
|
#5 |
Not sure whether I am supposed to proceed with the next step but I did with results below. I made a mistake in step 1 when I copied the commands for ver 12. I then did it again with the commands for ver 10.04. Does that affect the results?
So, after [bash alsa-info.sh --stdout] ...
/sbin/alsactl: get_control:250: Cannot read control info '2,0,0,Front Playback Volume,0': Invalid argument
cat: /tmp/alsa-
upload=
!!#####
!!ALSA Information Script v 0.4.61
!!#####
!!Script ran on: Fri Jan 4 19:42:01 UTC 2013
!!Linux Distribution
!!-----
Ubuntu 10.04.4 LTS \n \l DISTRIB_ID=Ubuntu DISTRIB_
!!DMI Information
!!---------------
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: GA-78LMT-USB3
Product Version:
Firmware Version: F2
!!Kernel Information
!!-----
Kernel release: 2.6.32-45-generic
Operating System: GNU/Linux
Architecture: i686
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.21
Library version: 1.0.24.1
Utilities version: 1.0.24.2
!!Loaded ALSA modules
!!-----
snd_hda_intel
snd_hda_intel
!!Sound Servers on this system
!!-----
Pulseaudio:
Installed - Yes (/usr/bin/
Running - Yes
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
!!Soundcards recognised by ALSA
!!-----
0 [SB ]: HDA-Intel - HDA ATI SB
1 [HDMI ]: HDA-Intel - HDA ATI HDMI
!!PCI Soundcards installed in the system
!!-----
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller
!!Advanced information - PCI Vendor/
!!-----
00:14.2 0403: 1002:4383
Subsystem: 1458:a002
--
01:05.1 0403: 1002:960f
Subsystem: 1002:960f
!!Modprobe options (Sound related)
!!-----
snd-atiixp-modem: index=-2
snd-intel8x0m: index=-2
snd-via82xx-modem: index=-2
snd-usb-audio: index=-2
snd-usb-caiaq: index=-2
snd-usb-ua101: index=-2
snd-usb-us122l: index=-2
snd-usb-usx2y: index=-2
snd-cmipci: mpu_port=0x330 fm_port=0x388
snd-pcsp: index=-2
snd-usb-audio: index=-2
!!Loaded sound module options
!!-----
!!Module: snd_hda_intel
bdl_pos_adj : 32,32,-
enable : Y,Y,Y,Y,
enable_msi : 0
id : <NULL>,
index : -1,-1,-
model : <NULL>,
patch : <NULL>,
position_fix : 0,0,0,0,
power_save : 0
power_
probe_mask : -1,-1,-
probe_only : N,N,N,N,
single_cmd : N
!!Module: snd_hda_intel
bdl_pos_adj : 32,32,-
enable : Y,Y,Y,Y,
enable_msi : 0
id : <NULL>,
index : -1,-1,-
model : <NULL>,
patch : <NULL>,
position_fix : 0,0,0,0,
power_save : 0
power_
probe_mask : -1,-1,-
probe_only : N,N,N,N,
single_cmd : N
!!HDA-Intel Codec information
!!-----
--startcollapse--
Codec: Realtek ALC887
Address: 0
Function Id: 0x1
Vendor Id: 0x10ec0887
Subsystem Id: 0x1458a002
Revision Id: 0x100302
No Modem Function Group found
Default PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x05 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 1
0x22
Node 0x0a [Audio Input] wcaps 0x100711: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 1
0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 10
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Connection: 2
0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Connection: 2
0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Connection: 2
0x05 0x0b
Node 0x10 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x11 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x99430130: [Fixed] SPDIF Out at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x10
Node 0x12 [Pin Complex] wcaps 0x400401: Stereo
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power: setting=D0, actual=D0
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001003e: IN OUT HP EAPD Detect Trigger
EAPD 0x0:
Pin Default 0x01014410: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x0c
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00000036: IN OUT Detect Trigger
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x0d
Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00000036: IN OUT Detect Trigger
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x0e
Node 0x17 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00000036: IN OUT Detect Trigger
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x0f
Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00003736: IN OUT Detect Trigger
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x01a19c40: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x19 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000373e: IN OUT HP Detect Trigger
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x02a19c50: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x5, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00003736: IN OUT Detect Trigger
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x0181344f: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0x4, Sequence = 0xf
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001373e: IN OUT HP EAPD Detect Trigger
Vref caps: HIZ 50 GRD 80 100
EAPD 0x0:
Pin Default 0x02214c20: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1c [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
Pincap 0x00000020: IN
Pin Default 0x4004c601: [N/A] Line Out at Ext N/A
Conn = RCA, Color = UNKNOWN
DefAssociation = 0x0, Sequence = 0x1
Pin-ctls: 0x20: IN
Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x06
Node 0x1f [Pin Complex] wcaps 0x400681: Stereo Digital
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=24
Processing Coefficient: 0x3f02
Coefficient Index: 0x0d
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 12
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b 0x12
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x26 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Connection: 2
0x25 0x0b
Codec: ATI RS690/780 HDMI
Address: 0
Function Id: 0x1
Vendor Id: 0x1002791a
Subsystem Id: 0x00791a00
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x60]: 44100 48000
bits [0x2]: 16
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x201: Stereo Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000094: OUT Detect HDMI
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 10 Jan 4 19:23 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 13 Jan 4 19:23 /dev/snd/controlC1
crw-rw----+ 1 root audio 116, 9 Jan 4 19:23 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 12 Jan 4 19:23 /dev/snd/hwC1D0
crw-rw----+ 1 root audio 116, 8 Jan 4 19:24 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 7 Jan 4 19:24 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 6 Jan 4 19:24 /dev/snd/pcmC0D1c
crw-rw----+ 1 root audio 116, 5 Jan 4 19:23 /dev/snd/pcmC0D1p
crw-rw----+ 1 root audio 116, 4 Jan 4 19:23 /dev/snd/pcmC0D2c
crw-rw----+ 1 root audio 116, 11 Jan 4 19:23 /dev/snd/pcmC1D3p
crw-rw----+ 1 root audio 116, 3 Jan 4 19:23 /dev/snd/seq
crw-rw----+ 1 root audio 116, 2 Jan 4 19:23 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 Jan 4 19:23 .
drwxr-xr-x 3 root root 300 Jan 4 19:23 ..
lrwxrwxrwx 1 root root 12 Jan 4 19:23 pci-0000:00:14.2 -> ../controlC0
lrwxrwxrwx 1 root root 12 Jan 4 19:23 pci-0000:01:05.1 -> ../controlC1
!!Aplay/Arecord output
!!-----
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC887 Analog [ALC887 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC887 Digital [ALC887 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC887 Analog [ALC887 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC887 Digital [ALC887 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 2: ALC887 Analog [ALC887 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [SB]
amixer: Mixer load hw:0 error: Invalid argument
Card hw:0 'SB'/'HDA ATI SB at 0xfe024000 irq 16'
Mixer name : 'Realtek ALC887'
Components : 'HDA:10ec0887,
Controls : 40
amixer: Mixer hw:0 load error: Invalid argument
!!-------Mixer controls for card 1 [HDMI]
Card hw:1 'HDMI'/'HDA ATI HDMI at 0xfdafc000 irq 19'
Mixer name : 'ATI RS690/780 HDMI'
Components : 'HDA:1002791a,
Controls : 4
Simple ctrls : 1
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
!!Alsactl output
!!--------------
--startcollapse--
--endcollapse--
!!All Loaded Modules
!!-----
Module
binfmt_misc
snd_hda_
fbcon
tileblit
font
bitblit
softcursor
vga16fb
vgastate
snd_hda_
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_seq_dummy
snd_pcm
snd_seq_oss
snd_seq_midi
snd_rawmidi
radeon
snd_seq_midi_event
ttm
snd_seq
drm_kms_helper
snd_timer
snd_seq_device
drm
agpgart
i2c_algo_bit
ppdev
snd
parport_pc
lp
soundcore
joydev
snd_page_alloc
serio_raw
shpchp
parport
i2c_piix4
xhci
hid_microsoft
usbhid
hid
usb_storage
floppy
r8169
mii
ahci
pata_atiixp
!!Sysfs Files
!!-----------
/sys/class/
0x11 0x99430130
0x12 0x411111f0
0x14 0x01014410
0x15 0x411111f0
0x16 0x411111f0
0x17 0x411111f0
0x18 0x01a19c40
0x19 0x02a19c50
0x1a 0x0181344f
0x1b 0x02214c20
0x1c 0x411111f0
0x1d 0x4004c601
0x1e 0x411111f0
0x1f 0x411111f0
/sys/class/
/sys/class/
/sys/class/
/sys/class/
0x03 0x18560010
/sys/class/
/sys/class/
/sys/class/
!!ALSA/HDA dmesg
!!--------------
[ 7.069987] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
[ 7.104607] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.110546] [drm] ring test succeeded in 1 usecs
--
[ 7.156047] type=1505 audit(135732742
[ 7.192925] input: HDA Digital PCBeep as /devices/
[ 7.201278] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 7.201340] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 7.228214] r8169: eth1: link up
--
[ 7.250510] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
[ 7.250597] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 7.250620] HDA Intel 0000:01:05.1: setting latency timer to 64
[ 7.254529] vga16fb: initializing
--
[ 7.277053] Console: switching to colour frame buffer device 160x64
[ 7.309664] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 7.309742] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 7.309846] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 7.325108] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 7.325160] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 7.325268] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 7.585301] CPU0 attaching NULL sched-domain.
--
[ 8.788071] groups: 1 0
[ 9.094383] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 9.132460] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 9.152440] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 18.096057] eth1: no IPv6 routers present
[ 25.748493] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 25.776510] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 255.835114] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 255.840617] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 255.875461] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 1107.219919] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 1107.221814] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 1107.235788] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
Revision history for this message
|
#6 |
This is a known issue with the ALC887 sound codec.
See the following bugreport for details:
https:/
Please run the following command in a Terminal:
gksudo gedit /etc/modprobe.
Using the gedit editor, ADD the following single configuration line:
options snd-hda-intel model=generic
SAVE the change to /etc/modprobe.
Then REBOOT and retest sound using headphones and speakers and microphone.
After rebooting, make sure all channels are UNMUTED and volume set to 100% in alsamixer.
Source: https:/
Source 2: https:/
Revision history for this message
|
#7 |
Thanks Mark Rijckenberg, that solved my question.
Revision history for this message
|
#8 |
Just great! Sound back to normal. Really appreciate your help. Probably never solve it on my own.
Another problem just noticed but not related to sound - cannot seem to drag windows between desktops. Do you have any idea as to the problem? Maybe I should ask a new question...
Revision history for this message
|
#9 |
Please create a new thread for your new question.