Codec + Mixer: SigmaTel STAC9200 - card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) - sound output not working via headphones on Dell Inspiron E1705 in Ubuntu 10.10
Hello,
I have a Dell Inspiron E1705, and just intalled Ubuntu 10.10 -- I am new to linux.
When the computer reboots, I get a "Fatal error" saying that it cannot find a module - I can write down the entire error message and post it - but I'm assuming it cannot find my sound driver.
Is there a way for me to install the sound drivers for this dell on Ubuntu?
Thanks for your help, really appreciate it (because I am lost and have no idea!)
Question information
- Language:
- English Edit question
- Status:
- Solved
- Assignee:
- No assignee Edit question
- Solved by:
- Mark Rijckenberg
- Solved:
- Last query:
- Last reply:
Revision history for this message
|
#1 |
Please execute step 2 and then send us the full terminal output from step 3 and step 4 from this procedure:
https:/
Revision history for this message
|
#2 |
I did steps 2,3,4 -- see below.
But, please note this is the error message that I see when I reboot my computer:
"modprobe: FATAL ERROR - could not load lib/modules/
sami@sami-MP061:~$ wget -O alsa-info.sh http://
--2010-10-26 20:17:16-- http://
Resolving www.alsa-
Connecting to www.alsa-
HTTP request sent, awaiting response... 302 Found
Location: http://
--2010-10-26 20:17:18-- http://
Resolving git.alsa-
Reusing existing connection to www.alsa-
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/plain]
Saving to: `alsa-info.sh'
[ <=> ] 27,026 66.4K/s in 0.4s
2010-10-26 20:17:20 (66.4 KB/s) - `alsa-info.sh' saved [27026]
sami@sami-MP061:~$ bash alsa-info.sh --stdout
upload=
!!#####
!!ALSA Information Script v 0.4.59
!!#####
!!Script ran on: Wed Oct 27 03:17:33 UTC 2010
!!Linux Distribution
!!-----
Ubuntu 10.10 \n \l DISTRIB_ID=Ubuntu DISTRIB_
!!DMI Information
!!---------------
Manufacturer: Dell Inc.
Product Name: MP061
!!Kernel Information
!!-----
Kernel release: 2.6.35-22-generic
Operating System: GNU/Linux
Architecture: i686
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.23
Library version: 1.0.23
Utilities version: 1.0.23
!!Loaded ALSA modules
!!-----
snd_hda_intel
!!Sound Servers on this system
!!-----
Pulseaudio:
Installed - Yes (/usr/bin/
Running - Yes
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
!!Soundcards recognised by ALSA
!!-----
0 [Intel ]: HDA-Intel - HDA Intel
!!PCI Soundcards installed in the system
!!-----
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
!!Advanced information - PCI Vendor/
!!-----
00:1b.0 0403: 8086:27d8 (rev 01)
Subsystem: 1028:01cd
--
Prefetchable memory behind bridge: 000000004020000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
!!Modprobe options (Sound related)
!!-----
snd-atiixp-modem: index=-2
snd-intel8x0m: index=-2
snd-via82xx-modem: index=-2
snd-usb-audio: index=-2
snd-usb-caiaq: index=-2
snd-usb-ua101: index=-2
snd-usb-us122l: index=-2
snd-usb-usx2y: index=-2
snd-cmipci: mpu_port=0x330 fm_port=0x388
snd-pcsp: index=-2
snd-usb-audio: index=-2
!!Loaded sound module options
!!-----
!!Module: snd_hda_intel
bdl_pos_adj : 1,-1,-1,
beep_mode : 0,0,0,0,
enable : Y,Y,Y,Y,
enable_msi : -1
id : (null),
index : -1,-1,-
model : (null),
patch : (null),
position_fix : 0,0,0,0,
power_save : 0
power_
probe_mask : -1,-1,-
probe_only : 0,0,0,0,
single_cmd : N
!!HDA-Intel Codec information
!!-----
--startcollapse--
Codec: SigmaTel STAC9200
Address: 0
Function Id: 0x1
Vendor Id: 0x83847690
Subsystem Id: 0x102801cd
Revision Id: 0x102201
No Modem Function Group found
Default PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
GPIO: io=4, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0xd0401: Stereo
Device: name="STAC92xx Analog", type="Audio", device=0
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x03 [Audio Input] wcaps 0x1d0541: Stereo
Device: name="STAC92xx Analog", type="Audio", device=0
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x0a
Processing caps: benign=0, ncoeff=0
Node 0x04 [Audio Input] wcaps 0x140311: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Connection: 1
0x08
Node 0x05 [Audio Output] wcaps 0x40211: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="STAC92xx Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
PCM:
rates [0x1e0]: 44100 48000 88200 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Node 0x06 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Delay: 3 samples
Node 0x07 [Audio Selector] wcaps 0x300901: Stereo R/L
Connection: 3
0x02* 0x08 0x0a
Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x00010024: IN EAPD Detect
EAPD 0x0:
Pin Default 0x40c003fa: [N/A] SPDIF In at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0xa
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Delay: 3 samples
Node 0x09 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x01441340: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Black
DefAssociation = 0x4, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 2
0x05* 0x0a
Node 0x0a [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x0c
Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
Control: name="Master Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Master Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: N/A
Amp-Out vals: [0x02 0x02]
Connection: 1
0x07
Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Mux Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 5
0x10* 0x0f 0x0e 0x0d 0x12
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
Pin Default 0x0421121f: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0x00:
Unsolicited: tag=01, enabled=1
Connection: 1
0x0b
Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense
Pin Default 0x90170310: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0b
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00000037: IN OUT Detect Trigger ImpSense
Pin Default 0x90170310: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0b
Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x04a11020: [Jack] Mic at Ext Right
Conn = 1/8, Color = Black
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Connection: 1
0x0b
Node 0x11 [Pin Complex] wcaps 0x400104: Mono Amp-Out
Control: name="LFE Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="LFE Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Amp-Out caps: N/A
Amp-Out vals: [0x00]
Pincap 0x00000010: OUT
Pin Default 0x90170310: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x13
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x40f003fc: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0xc
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x13 [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x07
Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
Amp-Out vals: [0x00]
Codec: Conexant ID 2bfa
Address: 1
Function Id: 0x2
Vendor Id: 0x14f12bfa
Subsystem Id: 0x14f100c3
Revision Id: 0x90000
Modem Function Group: 0x2
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 9 Oct 26 20:14 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 8 Oct 26 20:14 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 7 Oct 26 20:14 /dev/snd/hwC0D1
crw-rw----+ 1 root audio 116, 6 Oct 26 20:14 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 5 Oct 26 20:14 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 4 Oct 26 20:14 /dev/snd/pcmC0D1p
crw-rw----+ 1 root audio 116, 3 Oct 26 20:14 /dev/snd/seq
crw-rw----+ 1 root audio 116, 2 Oct 26 20:14 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Oct 26 20:14 .
drwxr-xr-x 3 root root 220 Oct 26 20:14 ..
lrwxrwxrwx 1 root root 12 Oct 26 20:14 pci-0000:00:1b.0 -> ../controlC0
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xefffc000 irq 44'
Mixer name : 'SigmaTel STAC9200'
Components : 'HDA:83847690,
Controls : 13
Simple ctrls : 7
Simple mixer control 'Master',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 2 [6%] [-43.50dB] [on]
Front Right: Playback 2 [6%] [-43.50dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 250 [98%] [-1.00dB]
Front Right: Playback 250 [98%] [-1.00dB]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 0 [0%] [0.00dB] [off]
Front Right: Capture 0 [0%] [0.00dB] [off]
Simple mixer control 'Mux',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 0 [0%] [0.00dB]
Front Right: Capture 0 [0%] [0.00dB]
!!Alsactl output
!!-------------
--startcollapse--
state.Intel {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -4650
comment.dbmax 0
iface MIXER
name 'Master Playback Volume'
value.0 2
value.1 2
}
control.2 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Master Playback Switch'
value.0 true
value.1 true
}
control.3 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 15'
comment.dbmin 0
comment.dbmax 2250
iface MIXER
name 'Capture Volume'
value.0 0
value.1 0
}
control.4 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
value.0 false
value.1 false
}
control.5 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 31'
comment.dbmin -4650
comment.dbmax 0
iface MIXER
name 'LFE Playback Volume'
value 31
}
control.6 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'LFE Playback Switch'
value true
}
control.7 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 4'
comment.dbmin 0
comment.dbmax 4000
iface MIXER
name 'Mux Capture Volume'
value.0 0
value.1 0
}
control.8 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff0000000000
}
control.9 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f000000000000
}
control.10 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
value '04000000000000
}
control.11 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value true
}
control.12 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
}
control.13 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 255'
comment.tlv '00000001000000
comment.dbmin -5100
comment.dbmax 0
iface MIXER
name 'PCM Playback Volume'
value.0 250
value.1 250
}
}
--endcollapse--
!!All Loaded Modules
!!-----
Module
parport_pc
ppdev
binfmt_misc
nvidia
snd_hda_codec_idt
joydev
arc4
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm
iwl3945
snd_seq_midi
snd_rawmidi
snd_seq_midi_event
iwlcore
snd_seq
mac80211
snd_timer
snd_seq_device
dell_wmi
r852
cfg80211
sm_common
nand
dell_laptop
snd
nand_ids
nand_ecc
intel_agp
video
dcdbas
mtd
psmouse
output
soundcore
serio_raw
agpgart
snd_page_alloc
lp
parport
b44
firewire_ohci
sdhci_pci
ssb
sdhci
firewire_core
led_class
crc_itu_t
mii
!!Sysfs Files
!!-----------
/sys/class/
0x08 0x40f000f0
0x09 0x40f000f1
0x0d 0x0421101f
0x0e 0x90170110
0x0f 0x40f000f2
0x10 0x04a11020
0x11 0x40f000f3
0x12 0x40f000f4
/sys/class/
0x08 0x40c003fa
0x09 0x01441340
0x0d 0x0421121f
0x0e 0x90170310
0x0f 0x90170310
0x10 0x04a11020
0x11 0x90170310
0x12 0x40f003fc
/sys/class/
/sys/class/
/sys/class/
0x73 0x016a0000
/sys/class/
/sys/class/
/sys/class/
!!ALSA/HDA dmesg
!!-----
[ 15.329562] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/
[ 15.368508] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 15.368565] alloc irq_desc for 44 on node -1
[ 15.368568] alloc kstat_irqs on node -1
[ 15.368584] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 15.368625] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.368688] iwl3945 0000:0c:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
--
[ 15.378655] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 15.453889] input: HDA Intel Mic at Ext Right Jack as /devices/
[ 15.454159] input: HDA Intel HP Out at Ext Right Jack as /devices/
[ 15.894854] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sami@sami-MP061:~$
sami@sami-MP061:~$ cat /proc/asound/
Advanced Linux Sound Architecture Driver Version 1.0.23.
0 [Intel ]: HDA-Intel - HDA Intel
2: : timer
3: : sequencer
4: [ 0- 1]: digital audio playback
5: [ 0- 0]: digital audio playback
6: [ 0- 0]: digital audio capture
7: [ 0- 1]: hardware dependent
8: [ 0- 0]: hardware dependent
9: [ 0] : control
00-01: HDA Codec 1
00-00: HDA Codec 0
00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 1
00-01: STAC92xx Digital : STAC92xx Digital : playback 1
Client info
cur clients : 1
peak clients : 1
max clients : 192
Client 0 : "System" [Kernel]
Port 0 : "Timer" (Rwe-)
Port 1 : "Announce" (R-e-)
Client 14 : "Midi Through" [Kernel]
Port 0 : "Midi Through Port-0" (RWe-)
[sudo] password for sami:
rm: cannot remove `/etc/asound.conf': No such file or directory
rm: cannot remove `/home/
Get:1 http://
Ign http://
Ign http://
Get:2 http://
Hit http://
Ign http://
Get:3 http://
Ign http://
Hit http://
Ign http://
Hit http://
Ign http://
Ign http://
Hit http://
Get:4 http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Get:5 http://
Ign http://
Ign http://
Get:6 http://
Ign http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Hit http://
Get:7 http://
Get:8 http://
Hit http://
Get:9 http://
Get:10 http://
Get:11 http://
Get:12 http://
Hit http://
Get:13 http://
Get:14 http://
Get:15 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:16 http://
Get:17 http://
Get:18 http://
Get:19 http://
Get:20 http://
Get:21 http://
Get:22 http://
Get:23 http://
Hit http://
Hit http://
Hit http://
Hit http://
Fetched 216kB in 4s (52.6kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libboost-
libio-string-perl libparse-
Suggested packages:
aptitude-doc-en aptitude-doc tasksel debtags libcwidget-dev
libhtml-
The following NEW packages will be installed:
aptitude libboost-
libio-string-perl libparse-
0 upgraded, 7 newly installed, 0 to remove and 0 not upgraded.
Need to get 2,701kB/2,737kB of archives.
After this operation, 8,327kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://
Get:2 http://
Get:3 http://
Get:4 http://
Get:5 http://
Fetched 2,701kB in 20s (133kB/s)
Selecting previously deselected package libboost-
(Reading database ... 123014 files and directories currently installed.)
Unpacking libboost-
Selecting previously deselected package libcwidget3.
Unpacking libcwidget3 (from .../libcwidget3
Selecting previously deselected package aptitude.
Unpacking aptitude (from .../aptitude_
Selecting previously deselected package libsub-name-perl.
Unpacking libsub-name-perl (from .../libsub-
Selecting previously deselected package libclass-
Unpacking libclass-
Selecting previously deselected package libio-string-perl.
Unpacking libio-string-perl (from .../libio-
Selecting previously deselected package libparse-
Unpacking libparse-
Processing triggers for man-db ...
Setting up libboost-
Setting up libcwidget3 (0.5.16-3ubuntu1) ...
Setting up aptitude (0.6.3-2ubuntu4) ...
update-
Setting up libsub-name-perl (0.04-1build1) ...
Setting up libclass-
Setting up libio-string-perl (1.08-2) ...
Setting up libparse-
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
The following NEW packages will be installed:
libgconfmm-
paprefs{a} pavucontrol{a} pavumeter{a} pulseaudio-
0 packages upgraded, 8 newly installed, 0 to remove and 0 not upgraded.
Need to get 347kB/400kB of archives. After unpacking 2,892kB will be used.
Do you want to continue? [Y/n/?] y
Get:1 http://
Get:2 http://
Get:3 http://
Get:4 http://
Get:5 http://
Get:6 http://
Fetched 347kB in 1s (174kB/s)
Selecting previously deselected package libgconfmm-2.6-1c2.
(Reading database ... 123203 files and directories currently installed.)
Unpacking libgconfmm-2.6-1c2 (from .../libgconfmm-
Selecting previously deselected package libglademm-
Unpacking libglademm-2.4-1c2a (from .../libglademm-
Selecting previously deselected package pavumeter.
Unpacking pavumeter (from .../pavumeter_
Selecting previously deselected package pavucontrol.
Unpacking pavucontrol (from .../pavucontrol
Selecting previously deselected package paman.
Unpacking paman (from .../paman_
Selecting previously deselected package pulseaudio-
Unpacking pulseaudio-
Selecting previously deselected package paprefs.
Unpacking paprefs (from .../paprefs_
Selecting previously deselected package padevchooser.
Unpacking padevchooser (from .../padevchoose
Processing triggers for desktop-file-utils ...
Processing triggers for python-gmenu ...
Rebuilding /usr/share/
Processing triggers for man-db ...
Processing triggers for python-support ...
Setting up libgconfmm-2.6-1c2 (2.28.0-1) ...
Setting up libglademm-2.4-1c2a (2.6.7-2build1) ...
Setting up pavumeter (0.9.3-1ubuntu1) ...
Setting up pavucontrol (0.9.9-1) ...
Setting up paman (0.9.4-1ubuntu2) ...
Setting up pulseaudio-
Setting up paprefs (0.9.9-2ubuntu1) ...
Setting up padevchooser (0.9.3-2ubuntu4) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
H/W path Device Class Description
=======
/0 bus 0YD479
/0/0 memory 64KiB BIOS
/0/400 processor Genuine Intel(R) CPU T2300
/0/400/700 memory 32KiB L1 cache
/0/400/701 memory 2MiB L2 cache
/0/400/0.1 processor Logical CPU
/0/400/0.2 processor Logical CPU
/0/1000 memory 1GiB System Memory
/0/1000/0 memory 512MiB DIMM DDR Synchronous 533 MHz (
/0/1000/1 memory 512MiB DIMM DDR Synchronous 533 MHz (
/0/100 bridge Mobile 945GM/PM/GMS, 943/940GML and 9
/0/100/1 bridge Mobile 945GM/PM/GMS, 943/940GML and 9
/0/100/1/0 display G70 [GeForce Go 7800]
/0/100/1b multimedia N10/ICH 7 Family High Definition Audi
/0/100/1c bridge N10/ICH 7 Family PCI Express Port 1
/0/100/1c.1 bridge N10/ICH 7 Family PCI Express Port 2
/0/100/1c.1/0 wlan0 network PRO/Wireless 3945ABG [Golan] Network
/0/100/1c.3 bridge N10/ICH 7 Family PCI Express Port 4
/0/100/1d bus N10/ICH 7 Family USB UHCI Controller
/0/100/1d.1 bus N10/ICH 7 Family USB UHCI Controller
/0/100/1d.2 bus N10/ICH 7 Family USB UHCI Controller
/0/100/1d.3 bus N10/ICH 7 Family USB UHCI Controller
/0/100/1d.7 bus N10/ICH 7 Family USB2 EHCI Controller
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1e/0 eth0 network BCM4401-B0 100Base-TX
/0/100/1e/1 bus R5C832 IEEE 1394 Controller
/0/100/1e/1.1 generic R5C822 SD/SDIO/
/0/100/1e/1.2 generic R5C592 Memory Stick Bus Host Adapter
/0/100/1e/1.3 generic xD-Picture Card Controller
/0/100/1f bridge 82801GBM (ICH7-M) LPC Interface Bridg
/0/100/1f.2 scsi0 storage 82801GBM/GHM (ICH7 Family) SATA IDE C
/0/100/1f.2/0 /dev/sda disk 58GB ST96023AS
/0/100/1f.2/0/1 /dev/sda1 volume 52GiB EXT4 volume
/0/100/1f.2/0/2 /dev/sda2 volume 2322MiB Extended partition
/0/100/1f.2/0/2/5 /dev/sda5 volume 2322MiB Linux swap / Solaris partitio
/0/100/1f.2/1 /dev/cdrom disk DVD+-RW SDVD8820
/0/100/1f.3 bus N10/ICH 7 Family SMBus Controller
/1 power DELL D555164
total 0
crw-rw----+ 1 root audio 116, 2 2010-10-26 20:14 timer
crw-rw----+ 1 root audio 116, 3 2010-10-26 20:14 seq
crw-rw----+ 1 root audio 116, 7 2010-10-26 20:14 hwC0D1
crw-rw----+ 1 root audio 116, 8 2010-10-26 20:14 hwC0D0
crw-rw----+ 1 root audio 116, 9 2010-10-26 20:14 controlC0
drwxr-xr-x 2 root root 60 2010-10-26 20:14 by-path
drwxr-xr-x 3 root root 220 2010-10-26 20:14 .
crw-rw----+ 1 root audio 116, 4 2010-10-26 20:14 pcmC0D1p
crw-rw----+ 1 root audio 116, 5 2010-10-26 20:14 pcmC0D0p
crw-rw----+ 1 root audio 116, 6 2010-10-26 20:14 pcmC0D0c
drwxr-xr-x 17 root root 3660 2010-10-26 20:22 ..
cat: /dev/sndstat: No such file or directory
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01)
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01)
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 01)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01)
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01)
01:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce Go 7800] [10de:0098] (rev a1)
03:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832]
03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/
03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 0a)
03:01.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 05)
0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
/sbin/alsactl
Specified filename /dev/dsp does not exist.
/dev/snd/controlC0: sami 1475 F.... pulseaudio
dpkg: *bin/slmodemd* not found.
[ 0.216935] ACPI: No dock devices found.
[ 0.278601] HEST: Table is not found!
[ 0.334978] pnp: PnP ACPI: found 12 devices
[ 0.374572] audit: initializing netlink socket (disabled)
[ 0.374586] type=2000 audit(128812406
[ 0.406281] ERST: Table is not found!
[ 0.411254] Fixed MDIO Bus: probed
[ 0.411593] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.429197] hub 1-0:1.0: USB hub found
[ 0.429644] hub 2-0:1.0: USB hub found
[ 0.429988] hub 3-0:1.0: USB hub found
[ 0.430326] hub 4-0:1.0: USB hub found
[ 0.430669] hub 5-0:1.0: USB hub found
[ 0.453999] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.457421] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.778103] isapnp: No Plug & Play device found
[ 0.872740] hub 1-1:1.0: USB hub found
[ 1.106742] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 19)
[ 1.233067] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[ 1.233077] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[ 1.233085] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[ 1.277124] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 14.298500] lp: driver loaded but no devices found
[ 14.358685] leds_ss4200: no LED devices found
[ 15.085401] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.
[ 15.129916] type=1400 audit(128814928
[ 15.130709] type=1400 audit(128814928
[ 15.131146] type=1400 audit(128814928
[ 15.453889] input: HDA Intel Mic at Ext Right Jack as /devices/
[ 15.454159] input: HDA Intel HP Out at Ext Right Jack as /devices/
[ 15.914884] type=1400 audit(128814928
[ 15.915846] type=1400 audit(128814928
[ 15.916289] type=1400 audit(128814928
[ 15.916790] type=1400 audit(128814928
[ 15.921580] type=1400 audit(128814928
[ 15.924418] type=1400 audit(128814928
[ 15.925462] type=1400 audit(128814928
[ 16.070305] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9
sudo: /etc/init.
Product Name: MP061
Product Name: 0YD479
snd_seq_dummy 1350 0
snd_hda_codec_idt 54887 1
snd_hda_intel 22107 2
snd_hda_codec 87552 2 snd_hda_
snd_hwdep 5040 1 snd_hda_codec
snd_pcm 71475 2 snd_hda_
snd_seq_midi 4588 0
snd_rawmidi 17783 1 snd_seq_midi
snd_seq_midi_event 6047 1 snd_seq_midi
snd_seq 47174 3 snd_seq_
snd_timer 19067 2 snd_pcm,snd_seq
snd_seq_device 5744 4 snd_seq_
snd 49006 13 snd_hda_
soundcore 880 1 snd
snd_page_alloc 7120 2 snd_hda_
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
*-multimedia
description: Audio device
product: N10/ICH 7 Family High Definition Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 01
width: 64 bits
clock: 33MHz
resources: irq:44 memory:
sami@sami-MP061:~$
Revision history for this message
|
#3 |
There are 2 separate issues with your ALSA configuration:
Step A) Your ALSA Terminal output shows the following issue:
The Master channel in gnome-alsamixer is set to 6% volume. Please increase it to 100% volume.
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xefffc000 irq 44'
Mixer name : 'SigmaTel STAC9200'
Components : 'HDA:83847690,
Controls : 13
Simple ctrls : 7
Simple mixer control 'Master',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 2 [6%] [-43.50dB] [on]
Front Right: Playback 2 [6%] [-43.50dB] [on]
Step B) And after setting the Master channel to 100% volume, please follow this procedure:
1. copy-paste the following command into the Terminal:
gksudo gedit /etc/modprobe.
2. Using the gedit editor, add the following lines to the end of the /etc/modprobe.
# Keep snd-pcsp from beeing loaded as first soundcard
options snd-pcsp index=-2
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
options snd-hda-intel model=dell-m27
3. reboot and retest sound using headphones and speakers
4. If the dell-m27 alsa-base.conf option does not work, please try one of the following, reboot your pc and retest sound using headphones and speakers.
Only set ONE model option at a time in the alsa-base.conf file between EACH reboot. Do NOT mix several model options in the /etc/modprobe.
295 STAC9200
296 ========
297 ref Reference board
298 oqo OQO Model 2
299 dell-d21 Dell (unknown)
300 dell-d22 Dell (unknown)
301 dell-d23 Dell (unknown)
302 dell-m21 Dell Inspiron 630m, Dell Inspiron 640m
303 dell-m22 Dell Latitude D620, Dell Latitude D820
304 dell-m23 Dell XPS M1710, Dell Precision M90
305 dell-m24 Dell Latitude 120L
306 dell-m25 Dell Inspiron E1505n
307 dell-m26 Dell Inspiron 1501
308 dell-m27 Dell Inspiron E1705/9400
309 gateway-m4 Gateway laptops with EAPD control
310 gateway-m4-2 Gateway laptops with EAPD control
311 panasonic Panasonic CF-74
312 auto BIOS setup (default)
Make sure all channels are unmuted and set to 100% volume (after every reboot) in the gnome-alsamixer application.
Revision history for this message
|
#4 |
Thank you so much. I truly appreciate your help. Saved me a lot of headache.
I love Ubuntu.