Subwoofer not working on Fujitsu Siemens AMILO Xi 3650 in Ubuntu 10.04 alpha release
The subwoofer of my notebook (fujitsu siemens amilo xi3650) doesn't work when using ubuntu 10.04.The subwoofer is located on the back of the notebook. the regular speakers (next to my keabord work fine). my sound card is realtek alc888 high definition.
When I open alsa mixer in the terminal, following bars indicate following values:
- master --> 87
- headphone --> 00
- PCM --> 98 <>98
- front --> 100 <>100
- front Mi --> 0<>0
- Line --> 0<>0
- IEC958 --> no bar, no value
- IEC958 D --> no bar, no value
- speaker --> 100 <>100
I've no clue how to change settings as I am not really an experienced user, I am just a regular pc user who stumbled into ubuntu and liked the idea of open source. So if your able to help me please keep that in mind and be as specific as possible :-).
Many thanks, Cozze
Question information
- Language:
- English Edit question
- Status:
- Solved
- Assignee:
- No assignee Edit question
- Solved by:
- Mark Rijckenberg
- Solved:
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
Please send us the full terminal output from step 3 and step 4 from this procedure:
https:/
|
Revision history for this message
|
#2 |
cozze@cozze-
--2010-03-14 10:23:48-- http://
Connecting to 212.20.107.51:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: http://
--2010-03-14 10:23:48-- http://
Resolving git.alsa-
Reusing existing connection to 212.20.107.51:80.
HTTP request sent, awaiting response... 200 OK
Length: 27026 (26K) [text/plain]
Saving to: `alsa-info.sh'
100%[==
2010-03-14 10:23:48 (145 KB/s) - `alsa-info.sh' saved [27026/27026]
cozze@cozze-
ALSA Information Script v 0.4.59
-------
This script visits the following commands/files to collect diagnostic
information about your ALSA installation and sound related hardware.
dmesg
lspci
lsmod
aplay
amixer
alsactl
/proc/asound/
/sys/class/sound/
~/.asoundrc (etc.)
See 'alsa-info.sh --help' for command line options.
Automatically upload ALSA information to pastebin? [y/N] : y
Uploading information to www.pastebin.ca ... Done!
Your ALSA information is located at http://
Please inform the person helping you.
cozze@cozze-
ALSA Information Script v 0.4.59
-------
This script visits the following commands/files to collect diagnostic
information about your ALSA installation and sound related hardware.
dmesg
lspci
lsmod
aplay
amixer
alsactl
/proc/asound/
/sys/class/sound/
~/.asoundrc (etc.)
See 'alsa-info.sh --help' for command line options.
Automatically upload ALSA information to pastebin? [y/N] : y
Uploading information to www.pastebin.ca ... Done!
Your ALSA information is located at http://
Please inform the person helping you.
cozze@cozze-
0 [Intel ]: HDA-Intel - HDA Intel
[sudo] password for cozze:
rm: cannot remove `/etc/asound.conf': No such file or directory
rm: cannot remove `/home/
Reading package lists... Done
Building dependency tree
Reading state information... Done
Initializing package states... Done
Writing extended state information... Done
The following NEW packages will be installed:
libgconfmm-
padevchooser paman paprefs{a} pavucontrol{a} pavumeter{a}
pulseaudio-
The following packages will be REMOVED:
amb-plugins{u} cmt{u} libaudio2{u} libclalsadrv1{u} libgfortran3{u}
libmpich1.0gf{u} libqt3-mt{u} libsdl1.
rev-plugins{u} sfftw2{u} swh-plugins{u} vco-plugins{u}
0 packages upgraded, 9 newly installed, 13 to remove and 0 not upgraded.
Need to get 662kB of archives. After unpacking 11.6MB will be freed.
Do you want to continue? [Y/n/?] y
Writing extended state information... Done
Get:1 http://
Get:2 http://
Get:3 http://
Get:4 http://
Get:5 http://
Get:6 http://
Get:7 http://
Get:8 http://
Get:9 http://
Fetched 662kB in 1s (352kB/s)
(Reading database ... 210869 files and directories currently installed.)
Removing amb-plugins ...
Removing cmt ...
Removing libqt3-mt ...
Removing libaudio2 ...
Removing libclalsadrv1 ...
Removing sfftw2 ...
Removing libmpich1.0gf ...
Removing libgfortran3 ...
Removing mcp-plugins ...
Removing rev-plugins ...
Removing swh-plugins ...
Removing vco-plugins ...
dpkg: libsdl1.
libsdl1.2debian depends on libsdl1.
Package libsdl1.
Package libsdl1.2debian-all is not installed.
Package libsdl1.2debian-esd is not installed.
Package libsdl1.2debian-oss is not installed.
Package libsdl1.2debian-nas is not installed.
Package libsdl1.
Removing libsdl1.
Processing triggers for menu ...
Processing triggers for doc-base ...
Processing 2 removed doc-base file(s)...
Registering documents with scrollkeeper...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Selecting previously deselected package libgconfmm-2.6-1c2.
(Reading database ... 210623 files and directories currently installed.)
Unpacking libgconfmm-2.6-1c2 (from .../libgconfmm-
Selecting previously deselected package libglademm-
Unpacking libglademm-2.4-1c2a (from .../libglademm-
Selecting previously deselected package pavumeter.
Unpacking pavumeter (from .../pavumeter_
Selecting previously deselected package pavucontrol.
Unpacking pavucontrol (from .../pavucontrol
Selecting previously deselected package paman.
Unpacking paman (from .../paman_
Selecting previously deselected package pulseaudio-
Unpacking pulseaudio-
Selecting previously deselected package paprefs.
Unpacking paprefs (from .../paprefs_
Selecting previously deselected package padevchooser.
Unpacking padevchooser (from .../padevchoose
Selecting previously deselected package libsdl1.
Unpacking libsdl1.
Processing triggers for desktop-file-utils ...
Processing triggers for man-db ...
Processing triggers for menu ...
Setting up libgconfmm-2.6-1c2 (2.24.0-2) ...
Setting up libglademm-2.4-1c2a (2.6.7-2) ...
Setting up pavumeter (0.9.3-1ubuntu1) ...
Setting up pavucontrol (0.9.8+
Setting up paman (0.9.4-1ubuntu2) ...
Setting up pulseaudio-
Setting up paprefs (0.9.8+
Setting up padevchooser (0.9.3-2ubuntu4) ...
Setting up libsdl1.
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Processing triggers for menu ...
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
Writing extended state information... Done
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
*-multimedia
description: Audio device
product: 82801I (ICH9 Family) HD Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 03
width: 64 bits
clock: 33MHz
resources: irq:31 memory:
H/W path Device Class Description
=======
/0 bus XY680
/0/0 memory 105KiB BIOS
/0/4 processor Intel(R) Core(TM)2 Duo CPU T6400
/0/4/5 memory 64KiB L1 cache
/0/4/6 memory 2MiB L2 cache
/0/4/1.1 processor Logical CPU
/0/4/1.2 processor Logical CPU
/0/15 memory 4GiB System Memory
/0/15/0 memory 2GiB SODIMM DDR2 Synchronous 667 MHz
/0/15/1 memory 2GiB SODIMM DDR2 Synchronous 667 MHz
/0/1 processor
/0/1/1.1 processor Logical CPU
/0/1/1.2 processor Logical CPU
/0/100 bridge Mobile 4 Series Chipset Memory Contro
/0/100/1 bridge Mobile 4 Series Chipset PCI Express G
/0/100/1/0 display G96 [GeForce 9600M GT]
/0/100/2 display Mobile 4 Series Chipset Integrated Gr
/0/100/19 eth0 network 82567LF Gigabit Network Connection
/0/100/1a bus 82801I (ICH9 Family) USB UHCI Control
/0/100/1a.1 bus 82801I (ICH9 Family) USB UHCI Control
/0/100/1a.2 bus 82801I (ICH9 Family) USB UHCI Control
/0/100/1a.7 bus 82801I (ICH9 Family) USB2 EHCI Contro
/0/100/1b multimedia 82801I (ICH9 Family) HD Audio Control
/0/100/1c bridge 82801I (ICH9 Family) PCI Express Port
/0/100/1c.1 bridge 82801I (ICH9 Family) PCI Express Port
/0/100/1c.1/0 wmaster0 network Wireless WiFi Link 5100
/0/100/1d bus 82801I (ICH9 Family) USB UHCI Control
/0/100/1d.1 bus 82801I (ICH9 Family) USB UHCI Control
/0/100/1d.2 bus 82801I (ICH9 Family) USB UHCI Control
/0/100/1d.7 bus 82801I (ICH9 Family) USB2 EHCI Contro
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1e/4 bus FW322/323
/0/100/1f bridge ICH9M-E LPC Interface Controller
/0/100/1f.2 scsi0 storage Mobile 82801 SATA RAID Controller
/0/100/1f.2/0 /dev/sda disk 320GB WDC WD3200BEVT-2
/0/100/1f.2/0/1 /dev/sda1 volume 50GiB Windows NTFS volume
/0/100/1f.2/0/2 /dev/sda2 volume 222GiB Windows NTFS volume
/0/100/1f.2/0/3 /dev/sda3 volume 25GiB Extended partition
/0/100/1f.2/0/3/5 /dev/sda5 volume 24GiB Linux filesystem partition
/0/100/1f.2/0/3/6 /dev/sda6 volume 1106MiB Linux swap / Solaris partitio
/0/100/1f.2/1 /dev/cdrom disk DVDRAM GSA-T50N
/0/100/1f.3 bus 82801I (ICH9 Family) SMBus Controller
/0/2 scsi6 storage
/0/2/0.0.0 /dev/sdb disk SCSI Disk
/1 power Lithium Ion Battery
/2 system
/3 power To Be Defined By O.E.M
total 0
crw-rw----+ 1 root audio 116, 33 2010-03-14 10:17 timer
crw-rw----+ 1 root audio 116, 1 2010-03-14 10:17 seq
crw-rw----+ 1 root audio 116, 4 2010-03-14 10:17 hwC0D0
crw-rw----+ 1 root audio 116, 0 2010-03-14 10:17 controlC0
drwxr-xr-x 2 root root 60 2010-03-14 10:17 by-path
drwxr-xr-x 3 root root 200 2010-03-14 10:17 .
crw-rw----+ 1 root audio 116, 17 2010-03-14 10:17 pcmC0D1p
crw-rw----+ 1 root audio 116, 24 2010-03-14 10:17 pcmC0D0c
crw-rw----+ 1 root audio 116, 16 2010-03-14 10:21 pcmC0D0p
drwxr-xr-x 17 root root 3940 2010-03-14 10:38 ..
Sound Driver:
Kernel: Linux cozze-laptop 2.6.31-20-generic #57-Ubuntu SMP Mon Feb 8 09:05:19 UTC 2010 i686
Config options: 0
Installed drivers:
Type 10: ALSA emulation
Card config:
HDA Intel at 0xf3820000 irq 31
Audio devices:
0: ALC888 Analog (DUPLEX)
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Timers:
7: system timer
Mixers:
0: Realtek ALC888
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LF Gigabit Network Connection [8086:10bf] (rev 03)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03)
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93)
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
00:1f.2 RAID bus controller [0104]: Intel Corporation Mobile 82801 SATA RAID Controller [8086:282a] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
01:00.0 VGA compatible controller [0300]: nVidia Corporation G96 [GeForce 9600M GT] [10de:0649] (rev a1)
04:00.0 Network controller [0280]: Intel Corporation Wireless WiFi Link 5100 [8086:4232]
05:04.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev 70)
/sbin/alsactl
/dev/snd/controlC0: cozze 2029 F.... pulseaudio
dpkg: *bin/slmodemd* not found.
[ 0.680754] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 4.058275] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 15.330062] iwlagn 0000:04:00.0: firmware: requesting iwlwifi-
[ 15.359943] iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12
sudo: /etc/init.
snd_hda_
snd_hda_intel 25728 2
snd_hda_codec 84384 2 snd_hda_
snd_hwdep 7392 1 snd_hda_codec
snd_pcm_oss 37472 0
snd_mixer_oss 16220 1 snd_pcm_oss
snd_pcm 76480 3 snd_hda_
snd_seq_dummy 2752 0
snd_seq_oss 29216 0
snd_seq_midi 6656 0
snd_rawmidi 22336 1 snd_seq_midi
snd_seq_midi_event 7036 2 snd_seq_
snd_seq 50896 6 snd_seq_
snd_timer 21540 2 snd_pcm,snd_seq
snd_seq_device 7208 5 snd_seq_
snd 61156 18 snd_hda_
soundcore 7264 1 snd
snd_page_alloc 9124 2 snd_hda_
#!/bin/bash
SCRIPT_
CHANGELOG="http://
#######
#Copyright (C) 2007 Free Software Foundation.
#This program is free software; you can redistribute it and/or modify
#it under the terms of the GNU General Public License as published by
#the Free Software Foundation; either version 2 of the License, or
#(at your option) any later version.
#This program is distributed in the hope that it will be useful,
#but WITHOUT ANY WARRANTY; without even the implied warranty of
#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#GNU General Public License for more details.
#You should have received a copy of the GNU General Public License
#along with this program; if not, write to the Free Software
#Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#######
#The script was written for 2 main reasons:
# 1. Remove the need for the devs/helpers to ask several questions before we can easily help the user.
# 2. Allow newer/inexperienced ALSA users to give us all the info we need to help them.
#Set the locale (this may or may not be a good idea.. let me know)
export LC_ALL=C
#Change the PATH variable, so we can run lspci (needed for some distros)
PATH=$PATH:
BGTITLE="ALSA-Info v $SCRIPT_VERSION"
PASTEBINKEY=
#Define some simple functions
pbcheck(){
[[ $UPLOAD = "no" ]] && return
if [[ -z $PASTEBIN ]]; then
[[ $(ping -c1 www.alsa-
else
[[ $(ping -c1 www.pastebin.ca) ]] || KEEP_FILES="yes" UPLOAD="no" PBERROR="yes"
fi
}
update() {
SHFILE=`mktemp -t alsa-info.
wget -O $SHFILE "http://
REMOTE_
if [ "$REMOTE_VERSION" != "$SCRIPT_VERSION" ]; then
if [[ -n $DIALOG ]]
then
OVERWRITE=
if [ -w $0 ]; then
dialog --yesno "Newer version of ALSA-Info has been found\n\nDo you wish to install it?\nNOTICE: The original file $0 will be overwritten!" 0 0
DIALOG_
if [[ $DIALOG_EXIT_CODE = 0 ]]; then
OVERWRITE=yes
fi
fi
if [ -z "$OVERWRITE" ]; then
dialog --yesno "Newer version of ALSA-Info has been found\n\nDo you wish to download it?" 0 0
DIALOG_
fi
if [[ $DIALOG_EXIT_CODE = 0 ]]
then
echo "Newer version detected: $REMOTE_VERSION"
echo "To view the ChangeLog, please visit $CHANGELOG"
if [ "$OVERWRITE" = "yes" ]; then
cp $SHFILE $0
echo "ALSA-Info script has been updated to v $REMOTE_VERSION"
echo "Please re-run the script"
rm $SHFILE 2>/dev/null
else
echo "ALSA-Info script has been downloaded as $SHFILE."
echo "Please re-run the script from new location."
fi
exit
else
rm $SHFILE 2>/dev/null
fi
else
echo "Newer version detected: $REMOTE_VERSION"
echo "To view the ChangeLog, please visit $CHANGELOG"
if [ -w $0 ]; then
echo "The original file $0 will be overwritten!"
echo -n "If you do not like to proceed, press Ctrl-C now.." ; read inp
cp $SHFILE $0
echo "ALSA-Info script has been updated. Please re-run it."
rm $SHFILE 2>/dev/null
else
echo "ALSA-Info script has been downloaded $SHFILE."
echo "Please, re-run it from new location."
fi
exit
fi
else
rm $SHFILE 2>/dev/null
fi
}
cleanup() {
if [ -n "$TEMPDIR" -a "$KEEP_FILES" != "yes" ]; then
rm -rf "$TEMPDIR" 2>/dev/null
fi
test -n "$KEEP_OUTPUT" || rm -f "$NFILE"
}
withaplay() {
echo "!!Aplay/Arecord output" >> $FILE
echo "!!------------" >> $FILE
echo "" >> $FILE
echo "APLAY" >> $FILE
echo "" >> $FILE
aplay -l >> $FILE 2>&1
echo "" >> $FILE
echo "ARECORD" >> $FILE
echo "" >> $FILE
arecord -l >> $FILE 2>&1
echo "" >> $FILE
}
withlsmod() {
echo "!!All Loaded Modules" >> $FILE
echo "!!----
echo "" >> $FILE
lsmod |awk {'print $1'} >> $FILE
echo "" >> $FILE
echo "" >> $FILE
}
withamixer() {
echo "!!Amixer output" >> $FILE
echo "!!-------------" >> $FILE
echo "" >> $FILE
for i in `grep "]: " /proc/asound/cards | awk -F ' ' '{ print $1} '` ; do
CARD_NAME=`grep "^ *$i " $TEMPDIR/
echo "!!-------Mixer controls for card $i $CARD_NAME]" >> $FILE
echo "" >>$FILE
amixer -c$i info>> $FILE 2>&1
amixer -c$i>> $FILE 2>&1
echo "" >> $FILE
done
echo "" >> $FILE
}
withalsactl() {
echo "!!Alsactl output" >> $FILE
echo "!!-------------" >> $FILE
echo "" >> $FILE
exe=""
if [ -x /usr/sbin/alsactl ]; then
fi
if [ -x /usr/local/
fi
if [ -z "$exe" ]; then
fi
$exe -f $TEMPDIR/
echo "--startcollapse--" >> $FILE
cat $TEMPDIR/
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
}
withdevices() {
echo "!!ALSA Device nodes" >> $FILE
echo "!!----
echo "" >> $FILE
ls -la /dev/snd/* >> $FILE
echo "" >> $FILE
echo "" >> $FILE
}
withconfigs() {
if [[ -e $HOME/.asoundrc ]] || [[ -e /etc/asound.conf ]] || [[ -e $HOME/.
then
echo "!!ALSA configuration files" >> $FILE
echo "!!----
echo "" >> $FILE
#Check for ~/.asoundrc
if [[ -e $HOME/.asoundrc ]]
then
cat $HOME/.asoundrc >> $FILE
fi
#Check for .asoundrc.
if [[ -e $HOME/.
then
echo "!!asoundconf-
echo "" >> $FILE
cat $HOME/.
echo "" >> $FILE
echo "" >> $FILE
fi
#Check for /etc/asound.conf
if [[ -e /etc/asound.conf ]]
then
cat /etc/asound.conf >> $FILE
fi
fi
}
withsysfs() {
local i f
local printed=""
for i in /sys/class/sound/*; do
case "$i" in
*/hwC?D?)
if [ -f $i/init_pin_configs ]; then
if [ -z "$printed" ]; then
echo "!!Sysfs Files" >> $FILE
echo "!!-----------" >> $FILE
echo "" >> $FILE
fi
for f in init_pin_configs driver_pin_configs user_pin_configs init_verbs; do
echo "$i/$f:" >> $FILE
cat $i/$f >> $FILE
echo >> $FILE
done
printed=yes
fi
;;
esac
done
if [ -n "$printed" ]; then
echo "" >> $FILE
fi
}
withdmesg() {
echo "!!ALSA/HDA dmesg" >> $FILE
echo "!!----
echo "" >> $FILE
dmesg | grep -C1 -E 'ALSA|HDA|
echo "" >> $FILE
echo "" >> $FILE
}
withall() {
withdevices
withconfigs
withaplay
withamixer
withalsactl
withlsmod
withsysfs
withdmesg
}
get_alsa_
ALSA_LIB_
if [ -z "$ALSA_LIB_VERSION" ]; then
if [ -f /etc/lsb-release ]; then
. /etc/lsb-release
case "$DISTRIB_ID" in
Ubuntu)
if which dpkg > /dev/null ; then
ALSA_
fi
if [ "$ALSA_LIB_VERSION" = "<none>" ]; then
ALSA_
fi
return
;;
*)
return
;;
esac
elif [ -f /etc/debian_version ]; then
if which dpkg > /dev/null ; then
ALSA_
fi
if [ "$ALSA_LIB_VERSION" = "<none>" ]; then
ALSA_
fi
return
fi
fi
}
#Run checks to make sure the programs we need are installed.
LSPCI=$(which lspci 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null);
TPUT=$(which tput 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null);
DIALOG=$(which dialog 2>/dev/null | sed 's|^[^/]*||' 2>/dev/null);
#Check to see if sysfs is enabled in the kernel. We'll need this later on
SYSFS=$(mount |grep sysfs|awk {'print $3'});
#Check modprobe config files for sound related options
SNDOPTIONS=
KEEP_OUTPUT=
NFILE=""
PASTEBIN=""
WWWSERVICE=
WELCOME="yes"
PROCEED="yes"
UPLOAD="ask"
REPEAT=""
while [ -z "$REPEAT" ]; do
REPEAT="no"
case "$1" in
--update|
WELCOME="no"
PROCEED="no"
;;
--upload)
UPLOAD="yes"
WELCOME="no"
;;
--no-upload)
UPLOAD="no"
WELCOME="no"
;;
--pastebin)
PASTEBIN="yes"
WWWSERVICE=
;;
--no-dialog)
DIALOG=""
REPEAT=""
shift
;;
--stdout)
DIALOG=""
UPLOAD="no"
WELCOME="no"
TOSTDOUT="yes"
;;
esac
done
#Script header output.
if [ "$WELCOME" = "yes" ]; then
greeting_message="\
This script visits the following commands/files to collect diagnostic
information about your ALSA installation and sound related hardware.
dmesg
lspci
lsmod
aplay
amixer
alsactl
/proc/asound/
/sys/class/sound/
~/.asoundrc (etc.)
See '$0 --help' for command line options.
"
if [[ -n "$DIALOG" ]]; then
dialog --backtitle "$BGTITLE" \
--title "ALSA-Info script v $SCRIPT_VERSION" \
--msgbox "$greeting_message" 20 80
else
echo "ALSA Information Script v $SCRIPT_VERSION"
echo "------
echo "$greeting_message"
fi # dialog
fi # WELCOME
#Set the output file
TEMPDIR=`mktemp -t -d alsa-info.
FILE="$
if [ -z "$NFILE" ]; then
NFILE=`mktemp -t alsa-info.
fi
trap cleanup 0
if [ "$PROCEED" = "yes" ]; then
if [[ -z "$LSPCI" ]]
then
echo "This script requires lspci. Please install it, and re-run this script."
exit 0
fi
#Fetch the info and store in temp files/variables
DISTRO=`grep -ihs "buntu\
KERNEL_
KERNEL_
KERNEL_
KERNEL_OS=`uname -o`
[[ `uname -v |grep SMP` ]] && KERNEL_SMP="Yes" || KERNEL_SMP="No"
ALSA_DRIVER_
get_alsa_
ALSA_UTILS_
VENDOR_ID=`lspci -vn |grep 040[1-3] | awk -F':' '{print $3}'|awk {'print substr($0, 2);}' >$TEMPDIR/
DEVICE_ID=`lspci -vn |grep 040[1-3] | awk -F':' '{print $4}'|awk {'print $1'} >$TEMPDIR/
LAST_CARD=$((`grep "]: " /proc/asound/cards | wc -l` - 1 ))
ESDINST=$(which esd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
PAINST=$(which pulseaudio 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
ARTSINST=$(which artsd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
JACKINST=$(which jackd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
DMIDECODE=$(which dmidecode 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
#Check for DMI data
if [ -d /sys/class/dmi/id ]; then
# No root privileges are required when using sysfs method
DMI_
DMI_
elif [ -x $DMIDECODE ]; then
DMI_
DMI_
fi
cat /proc/asound/
cat /proc/asound/cards >$TEMPDIR/
lspci |grep -i "multi\
#Check for HDA-Intel cards codec#*
cat /proc/asound/
#Check for AC97 cards codec
cat /proc/asound/
cat /proc/asound/
#Check for USB mixer setup
cat /proc/asound/
#Fetch the info, and put it in $FILE in a nice readable format.
if [[ -z $PASTEBIN ]]; then
echo "upload=
else
echo "name=$
fi
echo "!!####
echo "!!ALSA Information Script v $SCRIPT_VERSION" >> $FILE
echo "!!####
echo "" >> $FILE
echo "!!Script ran on: `LANG=C TZ=UTC date`" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Linux Distribution" >> $FILE
echo "!!----
echo "" >> $FILE
echo $DISTRO >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!DMI Information" >> $FILE
echo "!!---------------" >> $FILE
echo "" >> $FILE
echo "Manufacturer: $DMI_SYSTEM_
echo "Product Name: $DMI_SYSTEM_
echo "" >> $FILE
echo "" >> $FILE
echo "!!Kernel Information" >> $FILE
echo "!!----
echo "" >> $FILE
echo "Kernel release: $KERNEL_VERSION" >> $FILE
echo "Operating System: $KERNEL_OS" >> $FILE
echo "Architecture: $KERNEL_MACHINE" >> $FILE
echo "Processor: $KERNEL_PROCESSOR" >> $FILE
echo "SMP Enabled: $KERNEL_SMP" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!ALSA Version" >> $FILE
echo "!!------------" >> $FILE
echo "" >> $FILE
echo "Driver version: $ALSA_DRIVER_
echo "Library version: $ALSA_LIB_VERSION" >> $FILE
echo "Utilities version: $ALSA_UTILS_
echo "" >> $FILE
echo "" >> $FILE
echo "!!Loaded ALSA modules" >> $FILE
echo "!!----
echo "" >> $FILE
cat $TEMPDIR/
echo "" >> $FILE
echo "" >> $FILE
echo "!!Sound Servers on this system" >> $FILE
echo "!!----
echo "" >> $FILE
if [[ -n $PAINST ]];then
[[ `pgrep '^(.*/)
echo "Pulseaudio:" >> $FILE
echo " Installed - Yes ($PAINST)" >> $FILE
echo " Running - $PARUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ESDINST ]];then
[[ `pgrep '^(.*/)?esd$'` ]] && ESDRUNNING="Yes" || ESDRUNNING="No"
echo "ESound Daemon:" >> $FILE
echo " Installed - Yes ($ESDINST)" >> $FILE
echo " Running - $ESDRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ARTSINST ]];then
[[ `pgrep '^(.*/)?artsd$'` ]] && ARTSRUNNING="Yes" || ARTSRUNNING="No"
echo "aRts:" >> $FILE
echo " Installed - Yes ($ARTSINST)" >> $FILE
echo " Running - $ARTSRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $JACKINST ]];then
[[ `pgrep '^(.*/)?jackd$'` ]] && JACKRUNNING="Yes" || JACKRUNNING="No"
echo "Jack:" >> $FILE
echo " Installed - Yes ($JACKINST)" >> $FILE
echo " Running - $JACKRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -z "$PAINST" && -z "$ESDINST" && -z "$ARTSINST" && -z "$JACKINST" ]];then
echo "No sound servers found." >> $FILE
echo "" >> $FILE
fi
echo "" >> $FILE
echo "!!Soundcards recognised by ALSA" >> $FILE
echo "!!----
echo "" >> $FILE
cat $TEMPDIR/
echo "" >> $FILE
echo "" >> $FILE
echo "!!PCI Soundcards installed in the system" >> $FILE
echo "!!----
echo "" >> $FILE
cat $TEMPDIR/lspci.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Advanced information - PCI Vendor/
echo "!!----
echo "" >> $FILE
lspci -vvn |grep -A1 040[1-3] >> $FILE
echo "" >> $FILE
echo "" >> $FILE
if [ "$SNDOPTIONS" ]
then
echo "!!Modprobe options (Sound related)" >> $FILE
echo "!!----
echo "" >> $FILE
modprobe -c|sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p' >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
if [ -d "$SYSFS" ]
then
echo "!!Loaded sound module options" >> $FILE
echo "!!----
echo "" >> $FILE
for mod in `cat /proc/asound/
echo "!!Module: $mod" >> $FILE
for params in `echo $SYSFS/
echo -ne "\t";
echo "$params : `cat $params`" | sed 's:.*/::';
done >> $FILE
echo "" >> $FILE
done
echo "" >> $FILE
fi
if [ -s "$TEMPDIR/
then
echo "!!HDA-Intel Codec information" >> $FILE
echo "!!----
echo "--startcollapse--" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
if [ -s "$TEMPDIR/
then
echo "!!AC97 Codec information" >> $FILE
echo "!!----
echo "--startcollapse--" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/
echo "" >> $FILE
cat $TEMPDIR/
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
if [ -s "$TEMPDIR/
then
echo "!!USB Mixer information" >> $FILE
echo "!!----
echo "--startcollapse--" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
#If no command line options are specified, then run as though --with-all was specified
if [[ -z "$1" ]]
then
update
withall
pbcheck
fi
fi # proceed
#loop through command line arguments, until none are left.
if [[ -n "$1" ]]
then
until [ -z "$1" ]
do
case "$1" in
--pastebin)
update
withall
pbcheck
;;
--update)
update
exit
;;
--upload)
UPLOAD="yes"
withall
;;
--no-upload)
UPLOAD="no"
withall
;;
--output)
shift
NFILE="$1"
KEEP_
;;
--debug)
echo "Debugging enabled. $FILE and $TEMPDIR will not be deleted"
KEEP_FILES="yes"
echo ""
withall
;;
--with-all)
withall
;;
--with-aplay)
withaplay
;;
--with-amixer)
withamixer
;;
--with-alsactl)
withalsactl
;;
--with-devices)
withdevices
;;
--with-dmesg)
withdmesg
;;
--with-configs)
if [[ -e $HOME/.asoundrc ]] || [[ -e /etc/asound.conf ]]
then
echo "!!ALSA configuration files" >> $FILE
echo "!!----
echo "" >> $FILE
#Check for ~/.asoundrc
if [[ -e $HOME/.asoundrc ]]
then
echo "!!User specific config file ($HOME/.asoundrc)" >> $FILE
echo "" >> $FILE
cat $HOME/.asoundrc >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
#Check for /etc/asound.conf
if [[ -e /etc/asound.conf ]]
then
echo "!!System wide config file (/etc/asound.conf)" >> $FILE
echo "" >> $FILE
cat /etc/asound.conf >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
fi
;;
--stdout)
UPLOAD="no"
withall
cat $FILE
rm $FILE
;;
--about)
echo "Written/Tested by the following users of #alsa on irc.freenode.net:"
echo ""
echo " wishie - Script author and developer / Testing"
echo " crimsun - Various script ideas / Testing"
echo " gnubien - Various script ideas / Testing"
echo " GrueMaster - HDA Intel specific items / Testing"
echo " olegfink - Script update function"
echo " TheMuso - display to stdout functionality"
exit 0
;;
*)
echo "alsa-info.sh version $SCRIPT_VERSION"
echo ""
echo "Available options:"
echo " --with-aplay (includes the output of aplay -l)"
echo " --with-amixer (includes the output of amixer)"
echo " --with-alsactl (includes the output of alsactl)"
echo " --with-configs (includes the output of ~/.asoundrc and"
echo " /etc/asound.conf if they exist)"
echo " --with-devices (shows the device nodes in /dev/snd/)"
echo " --with-dmesg (shows the ALSA/HDA kernel messages)"
echo ""
echo " --output FILE (specify the file to output for no-upload mode)"
echo " --update (check server for script updates)"
echo " --upload (upload contents to remote server)"
echo " --no-upload (do not upload contents to remote server)"
echo " --pastebin (use http://
echo " instead www.alsa-
echo " --stdout (print alsa information to standard output"
echo " instead of a file)"
echo " --about (show some information about the script)"
echo " --debug (will run the script as normal, but will not"
echo " delete $FILE)"
exit 0
;;
esac
shift 1
done
fi
if [ "$PROCEED" = "no" ]; then
exit 1
fi
if [ "$UPLOAD" = "ask" ]; then
if [[ -n "$DIALOG" ]]; then
dialog --backtitle "$BGTITLE" --title "Information collected" --yes-label " UPLOAD / SHARE " --no-label " SAVE LOCALLY " --defaultno --yesno "\n\nAutomatically upload ALSA information to $WWWSERVICE?" 10 80
DIALOG_
if [ $DIALOG_EXIT_CODE != 0 ]; then
UPLOAD="no"
else
UPLOAD="yes"
fi
else
echo -n "Automatically upload ALSA information to $WWWSERVICE? [y/N] : "
read -e CONFIRM
if [ "$CONFIRM" != "y" ]; then
UPLOAD="no"
else
UPLOAD="yes"
fi
fi
fi
if [ "$UPLOAD" = "no" ]; then
if [ -z "$TOSTDOUT" ]; then
mv -f $FILE $NFILE || exit 1
KEEP_OUTPUT="yes"
fi
if [[ -n $DIALOG ]]
then
if [[ -n $PBERROR ]]; then
dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "An error occurred while contacting the $WWWSERVICE.\n Your information was NOT automatically uploaded.\n\nYour ALSA information is in $NFILE" 10 100
else
dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "\n\nYour ALSA information is in $NFILE" 10 60
fi
else
echo
if [[ -n $PBERROR ]]; then
echo "An error occurred while contacting the $WWWSERVICE."
echo "Your information was NOT automatically uploaded."
echo ""
echo "Your ALSA information is in $NFILE"
echo ""
else
if [ -z "$TOSTDOUT" ]; then
echo ""
echo "Your ALSA information is in $NFILE"
echo ""
fi
fi
fi
exit
fi # UPLOAD
#Test that wget is installed, and supports --post-file. Upload $FILE if it does, and prompt user to upload file if it doesnt.
if
WGET=$(which wget 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null); [[ -n "${WGET}" ]] && [[ -x "${WGET}" ]] && [[ `wget --help |grep post-file` ]]
then
if [[ -n $DIALOG ]]
then
if [[ -z $PASTEBIN ]]; then
wget -O - --tries=5 --timeout=60 --post-file=$FILE "http://
{ for i in 10 20 30 40 50 60 70 80 90; do
echo $i
sleep 0.2
done
echo; } |dialog --backtitle "$BGTITLE" --guage "Uploading information to www.alsa-
else
wget -O - --tries=5 --timeout=60 --post-file=$FILE "http://
{ for i in 10 20 30 40 50 60 70 80 90; do
echo $i
sleep 0.2
done
echo; } |dialog --backtitle "$BGTITLE" --guage "Uploading information to www.pastebin.ca ..." 6 70 0
fi
dialog --backtitle "$BGTITLE" --title "Information uploaded" --yesno "Would you like to see the uploaded information?" 5 100
DIALOG_EXIT_CODE=$?
if [ $DIALOG_EXIT_CODE = 0 ]; then
grep -v "alsa-info.txt" $FILE >$TEMPDIR/
dialog --backtitle "$BGTITLE" --textbox $TEMPDIR/
fi
clear
# no dialog
else
if [[ -z $PASTEBIN ]]; then
echo -n "Uploading information to www.alsa-
wget -O - --tries=5 --timeout=60 --post-file=$FILE http://
else
echo -n "Uploading information to www.pastebin.ca ... "
wget -O - --tries=5 --timeout=60 --post-file=$FILE http://
fi
#Progess spinner for wget transfer.
i=1
sp="/-\|"
echo -n ' '
while pgrep wget &>/dev/null
do
echo -en "\b${sp:
done
echo -e "\b Done!"
echo ""
fi #dialog
#See if tput is available, and use it if it is.
if [[ -n "$TPUT" ]]
then
if [[ -z $PASTEBIN ]]; then
FINAL_URL=`tput setaf 1; grep "SUCCESS:" $TEMPDIR/wget.tmp | cut -d ' ' -f 2 ; tput sgr0`
else
FINAL_URL=`tput setaf 1; grep "SUCCESS:" $TEMPDIR/wget.tmp |sed -n 's/.*\:
fi
else
if [[ -z $PASTEBIN ]]; then
FINAL_URL=`grep "SUCCESS:" $TEMPDIR/wget.tmp | cut -d ' ' -f 2`
else
FINAL_URL=`grep "SUCCESS:" $TEMPDIR/wget.tmp |sed -n 's/.*\:
fi
fi
#Output the URL of the uploaded file.
echo "Your ALSA information is located at $FINAL_URL"
echo "Please inform the person helping you."
echo ""
#We couldnt find a suitable wget, so tell the user to upload manually.
else
mv -f $FILE $NFILE || exit 1
KEEP_OUTPUT="yes"
if [[ -z $DIALOG ]]
then
if [[ -z $PASTEBIN ]]; then
echo ""
echo "Could not automatically upload output to http://
echo "Possible reasons are:"
echo " 1. Couldnt find 'wget' in your PATH"
echo " 2. Your version of wget is less than 1.8.2"
echo ""
echo "Please manually upload $NFILE to http://
echo ""
else
echo ""
echo "Could not automatically upload output to http://
echo "Possible reasons are:"
echo " 1. Couldnt find 'wget' in your PATH"
echo " 2. Your version of wget is less than 1.8.2"
echo ""
echo "Please manually upload $NFILE to http://
echo ""
fi
else
if [[ -z $PASTEBIN ]]; then
dialog --backtitle "$BGTITLE" --msgbox "Could not automatically upload output to http://
else
dialog --backtitle "$BGTITLE" --msgbox "Could not automatically upload output to http://
fi
fi
fi
|
Revision history for this message
|
#3 |
I don't know if you also speak German, but the solution seems to be written here:
http://
I quote the author of the article:
"2.3: Sound
Hier gibt es 2 möglichkeiten. Die einfache, ohne support für die integrierten mikrofone und die kompliziertere mit diesem support. Beide funktionieren soweit. Das einzige Problem das beide haben ist, dass der "Center" kanal - der Subwoofer - nicht aus geht, wenn man ein Headset o.ä. einsteckt. Dies muss man manuell machen.
2.3.1: Einfach, ohne integrierte Mikrofone:
Relativ einfach: Man muss nur in der datei /e
In der aktuellen Alsa-version gibt es meines Wissens nach noch keine perfekte Lösung für alle Probleme. Die meiner meinung nach beste ist jedoch diese: Die datei /etc/modprobe.
options snd-hda-intel model=lenovo-
anschließend den Rechner neu starten. Danach im Mixer unter Einstellungen alle Spuren aktivieren und unter Optionen den Channel Mode auf 6ch umstellen. Nun kann man unter Wiedergabe den Subwoofer mit dem Regler "Center" steuern (Auch der Regler "LFE" hat irgendwas damit zutun - keine ahnung). "
-> So open a Terminal and enter the following command:
gksudo gedit /etc/modprobe.
-> Then, using the gedit editor, add the following line at the end of the alsa-base.conf file:
options snd-hda-intel model=lenovo-
-> Then reboot. Go into gnome-alsamixer and activate all the channels. There should be an option to set the channel mode to "6ch" = "6 channel sound"
After that, you should be able to control a volume channel called "Center". Unmute and increase volume on both the "Center" and "LFE" channels to control the volume of the subwoofer.
Hope it helps,
Regards,
Mark
|
Revision history for this message
|
#4 |
Mark,
You're the best, it works!!! Now I finally can get rid of the Windows dual
boot and have a Ubuntu exclusive notebook.
Thanks very much for your great support!!
Cozze
2010/3/14 Mark Rijckenberg <email address hidden>
> Your question #104192 on gnome-terminal in ubuntu changed:
>
> https:/
>
> Status: Open => Answered
>
> Mark Rijckenberg proposed the following answer:
> I don't know if you also speak German, but the solution seems to be
> written here:
>
> http://
>
> I quote the author of the article:
>
> "2.3: Sound
> Hier gibt es 2 möglichkeiten. Die einfache, ohne support für die
> integrierten mikrofone und die kompliziertere mit diesem support. Beide
> funktionieren soweit. Das einzige Problem das beide haben ist, dass der
> "Center" kanal - der Subwoofer - nicht aus geht, wenn man ein Headset o.ä.
> einsteckt. Dies muss man manuell machen.
> 2.3.1: Einfach, ohne integrierte Mikrofone:
> Relativ einfach: Man muss nur in der datei /e
> In der aktuellen Alsa-version gibt es meines Wissens nach noch keine
> perfekte Lösung für alle Probleme. Die meiner meinung nach beste ist jedoch
> diese: Die datei /etc/modprobe.
> und ganz unten folgende Zeile anhängen:
> options snd-hda-intel model=lenovo-
> anschließend den Rechner neu starten. Danach im Mixer unter Einstellungen
> alle Spuren aktivieren und unter Optionen den Channel Mode auf 6ch
> umstellen. Nun kann man unter Wiedergabe den Subwoofer mit dem Regler
> "Center" steuern (Auch der Regler "LFE" hat irgendwas damit zutun - keine
> ahnung). "
>
>
> -> So open a Terminal and enter the following command:
>
> gksudo gedit /etc/modprobe.
>
>
> -> Then, using the gedit editor, add the following line at the end of the
> alsa-base.conf file:
>
> options snd-hda-intel model=lenovo-
>
> -> Then reboot. Go into gnome-alsamixer and activate all the channels.
> There should be an option to set the channel mode to "6ch" = "6 channel
> sound"
>
> After that, you should be able to control a volume channel called
> "Center". Unmute and increase volume on both the "Center" and "LFE"
> channels to control the volume of the subwoofer.
>
> Hope it helps,
>
> Regards,
>
> Mark
>
> --
> If this answers your question, please go to the following page to let us
> know that it is solved:
>
> https:/
>
> If you still need help, you can reply to this email or go to the
> following page to enter your feedback:
>
> https:/
>
> You received this question notification because you are a direct
> subscriber of the question.
>
|
Revision history for this message
|
#5 |
Thanks Mark Rijckenberg, that solved my question.
