Ubuntu

/Home failed to mount at boot, but not really..

Asked by Seth Hikari

I have two 3 partitions on my drive; "/", "/Home", and Windows 7

While booting, at the Ubuntu splash screen, it shows me the message that my /Home partition failed to mount, but after a second or two the message goes away and everything boots fine.

Should this be considered a bug? Or maybe we need to change how long before the error message is shown. Or maybe it is not mounting as quickly as possible?

It is not at all effecting anything really and is just only slightly annoying. Just want to know what should be done.

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Solved by:
actionparsnip
Solved:
Last query:
Last reply:
Revision history for this message
actionparsnip (andrew-woodhead666) said : 		#1

reboot and run:

dmesg

provide all the output here as an update

Revision history for this message
Seth Hikari (sethhikari) said : 		#2

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-generic (buildd@yellow) (gcc version 4.4.2 (Ubuntu 4.4.2-2ubuntu1) ) #6-Ubuntu SMP Mon Nov 23 12:25:24 UTC 2009 (Ubuntu 2.6.32-5.6-generic)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-generic root=UUID=988e859a-dc77-4a20-804d-6e6b27ea173e ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 000100000000 mask FFFFC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfee0 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009e000 (usable)
[ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bfee0000 (usable)
[ 0.000000] modified: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] modified: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
[ 0.000000] modified: 00000000bfef0000 - 00000000bff00000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfee0000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfee0000 @ 10000-13000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0100000000 - 0140000000 page 1G
[ 0.000000] kernel direct mapping tables up to 140000000 @ 12000-13000
[ 0.000000] RAMDISK: 377c8000 - 37fefa25
[ 0.000000] ACPI: RSDP 00000000000f79a0 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 00000000bfee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000bfeed7c0 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-557)
[ 0.000000] ACPI: DSDT 00000000bfee3280 0A4DB (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bfee0a80 00040
[ 0.000000] ACPI: SSDT 00000000bfeeda00 00544 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000bfeedfc0 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 00000000bfeee040 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000bfeed900 0008E (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff]
[ 0.000000] bootmap [0000000000017000 - 000000000003efff] pages 28
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a31284] TEXT DATA BSS ==> [0001000000 - 0001a31284]
[ 0.000000] #3 [00377c8000 - 0037fefa25] RAMDISK ==> [00377c8000 - 0037fefa25]
[ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
[ 0.000000] #5 [0001a32000 - 0001a32155] BRK ==> [0001a32000 - 0001a32155]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000f5e10] f5e10
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bfee0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1048174
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 103 pages reserved
[ 0.000000] DMA zone: 3823 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767768 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee3000
[ 0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000bfef0000
[ 0.000000] PM: Registered nosave memory: 00000000bfef0000 - 00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:30100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91288 r8192 d23400 u524288
[ 0.000000] pcpu-alloc: s91288 r8192 d23400 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030151
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-generic root=UUID=988e859a-dc77-4a20-804d-6e6b27ea173e ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 2d42000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000000] Memory: 4050300k/5242880k available (5465k kernel code, 1050184k absent, 142396k reserved, 3137k data, 692k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 41943040 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2210.139 MHz processor.
[ 0.020005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4420.27 BogoMIPS (lpj=22101360)
[ 0.020026] Security Framework initialized
[ 0.020046] AppArmor: AppArmor initialized
[ 0.020361] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.030852] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.031503] Mount-cache hash table entries: 256
[ 0.031620] Initializing cgroup subsys ns
[ 0.031624] Initializing cgroup subsys cpuacct
[ 0.031628] Initializing cgroup subsys memory
[ 0.031635] Initializing cgroup subsys devices
[ 0.031637] Initializing cgroup subsys freezer
[ 0.031639] Initializing cgroup subsys net_cls
[ 0.031655] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.031657] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.031659] CPU 0/0x0 -> Node 0
[ 0.031662] tseg: 00bff00000
[ 0.031664] CPU: Physical Processor ID: 0
[ 0.031665] CPU: Processor Core ID: 0
[ 0.031668] mce: CPU supports 6 MCE banks
[ 0.031676] using C1E aware idle routine
[ 0.031678] Performance Events: AMD PMU driver.
[ 0.031682] ... version: 0
[ 0.031684] ... bit width: 48
[ 0.031685] ... generic registers: 4
[ 0.031686] ... value mask: 0000ffffffffffff
[ 0.031688] ... max period: 00007fffffffffff
[ 0.031690] ... fixed-purpose events: 0
[ 0.031691] ... event mask: 000000000000000f
[ 0.033258] ACPI: Core revision 20090903
[ 0.050081] Setting APIC routing to flat
[ 0.050548] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.150661] CPU0: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
[ 0.160000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.030000] Initializing CPU#1
[ 0.030000] Calibrating delay using timer specific routine.. 4420.06 BogoMIPS (lpj=22100338)
[ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.030000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.030000] CPU 1/0x1 -> Node 0
[ 0.030000] CPU: Physical Processor ID: 0
[ 0.030000] CPU: Processor Core ID: 1
[ 0.310103] CPU1: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
[ 0.310114] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.320060] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.030000] Initializing CPU#2
[ 0.030000] Calibrating delay using timer specific routine.. 4420.07 BogoMIPS (lpj=22100368)
[ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.030000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.030000] CPU 2/0x2 -> Node 0
[ 0.030000] CPU: Physical Processor ID: 0
[ 0.030000] CPU: Processor Core ID: 2
[ 0.480048] CPU2: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
[ 0.480058] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.490058] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.030000] Initializing CPU#3
[ 0.030000] Calibrating delay using timer specific routine.. 4420.06 BogoMIPS (lpj=22100328)
[ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.030000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.030000] CPU 3/0x3 -> Node 0
[ 0.030000] CPU: Physical Processor ID: 0
[ 0.030000] CPU: Processor Core ID: 3
[ 0.650098] CPU3: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
[ 0.650108] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.660010] Brought up 4 CPUs
[ 0.660012] Total of 4 processors activated (17680.47 BogoMIPS).
[ 0.660990] CPU0 attaching sched-domain:
[ 0.660993] domain 0: span 0-3 level MC
[ 0.660995] groups: 0 1 2 3
[ 0.661000] CPU1 attaching sched-domain:
[ 0.661002] domain 0: span 0-3 level MC
[ 0.661004] groups: 1 2 3 0
[ 0.661008] CPU2 attaching sched-domain:
[ 0.661009] domain 0: span 0-3 level MC
[ 0.661011] groups: 2 3 0 1
[ 0.661015] CPU3 attaching sched-domain:
[ 0.661016] domain 0: span 0-3 level MC
[ 0.661018] groups: 3 0 1 2
[ 0.661100] regulator: core version 0.5
[ 0.661100] Time: 16:06:56 Date: 11/29/09
[ 0.661100] NET: Registered protocol family 16
[ 0.661100] node 0 link 0: io port [9000, ffff]
[ 0.661100] TOM: 00000000c0000000 aka 3072M
[ 0.661100] Fam 10h mmconf [f0000000, f00fffff]
[ 0.661100] node 0 link 0: mmio [a0000, bffff]
[ 0.661100] node 0 link 0: mmio [c0000000, efffffff]
[ 0.661100] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.661100] node 0 link 0: mmio [f0000000, f07fffff] ==> [f0100000, f07fffff]
[ 0.661100] TOM2: 0000000140000000 aka 5120M
[ 0.661100] bus: [00,07] on node 0 link 0
[ 0.661100] bus: 00 index 0 io port: [0, ffff]
[ 0.661100] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.661100] bus: 00 index 2 mmio: [c0000000, efffffff]
[ 0.661100] bus: 00 index 3 mmio: [f0800000, ffffffff]
[ 0.661100] bus: 00 index 4 mmio: [f0100000, f07fffff]
[ 0.661100] bus: 00 index 5 mmio: [140000000, fcffffffff]
[ 0.661100] ACPI: bus type pci registered
[ 0.661100] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.661100] PCI: MCFG area at f0000000 reserved in E820
[ 0.662113] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.662115] PCI: Using configuration type 1 for base access
[ 0.662704] bio: create slab <bio-0> at 0
[ 0.662704] ACPI: EC: Look up EC in DSDT
[ 0.680955] ACPI: Interpreter enabled
[ 0.680961] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.680988] ACPI: Using IOAPIC for interrupt routing
[ 0.702060] ACPI: No dock devices found.
[ 0.702437] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.702736] pci 0000:00:01.1: reg 10 io port: [0xff00-0xff3f]
[ 0.702746] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.702751] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
[ 0.702770] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.702775] pci 0000:00:01.1: PME# disabled
[ 0.702832] pci 0000:00:01.3: reg 10 32bit mmio: [0xfdf80000-0xfdffffff]
[ 0.702958] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
[ 0.702981] pci 0000:00:02.0: supports D1 D2
[ 0.702982] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.702985] pci 0000:00:02.0: PME# disabled
[ 0.703007] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
[ 0.703034] pci 0000:00:02.1: supports D1 D2
[ 0.703036] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.703039] pci 0000:00:02.1: PME# disabled
[ 0.703065] pci 0000:00:04.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.703087] pci 0000:00:04.0: supports D1 D2
[ 0.703089] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.703091] pci 0000:00:04.0: PME# disabled
[ 0.703115] pci 0000:00:04.1: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff]
[ 0.703141] pci 0000:00:04.1: supports D1 D2
[ 0.703143] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.703146] pci 0000:00:04.1: PME# disabled
[ 0.703180] pci 0000:00:06.0: reg 20 io port: [0xfc00-0xfc0f]
[ 0.703216] pci 0000:00:07.0: reg 10 32bit mmio: [0xfe020000-0xfe023fff]
[ 0.703243] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.703246] pci 0000:00:07.0: PME# disabled
[ 0.703301] pci 0000:00:09.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.703304] pci 0000:00:09.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.703308] pci 0000:00:09.0: reg 18 io port: [0x970-0x977]
[ 0.703311] pci 0000:00:09.0: reg 1c io port: [0xb70-0xb73]
[ 0.703314] pci 0000:00:09.0: reg 20 io port: [0xf700-0xf70f]
[ 0.703318] pci 0000:00:09.0: reg 24 32bit mmio: [0xfe026000-0xfe027fff]
[ 0.703354] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.703358] pci 0000:00:0a.0: reg 14 io port: [0xf600-0xf607]
[ 0.703361] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfe02a000-0xfe02a0ff]
[ 0.703365] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfe029000-0xfe02900f]
[ 0.703384] pci 0000:00:0a.0: supports D1 D2
[ 0.703386] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.703390] pci 0000:00:0a.0: PME# disabled
[ 0.703636] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.703643] pci 0000:00:10.0: PME# disabled
[ 0.703917] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.703924] pci 0000:00:13.0: PME# disabled
[ 0.704197] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.704204] pci 0000:00:14.0: PME# disabled
[ 0.704347] pci 0000:01:09.0: reg 10 32bit mmio: [0xfdee0000-0xfdeeffff]
[ 0.704404] pci 0000:01:0a.0: reg 10 32bit mmio: [0xfdeff000-0xfdefffff]
[ 0.704436] pci 0000:01:0a.0: supports D1 D2
[ 0.704438] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot
[ 0.704441] pci 0000:01:0a.0: PME# disabled
[ 0.704466] pci 0000:00:08.0: transparent bridge
[ 0.704469] pci 0000:00:08.0: bridge io port: [0xe000-0xefff]
[ 0.704471] pci 0000:00:08.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.704474] pci 0000:00:08.0: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff]
[ 0.704519] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.704522] pci 0000:02:00.0: PME# disabled
[ 0.704570] pci 0000:00:10.0: bridge io port: [0xc000-0xdfff]
[ 0.704577] pci 0000:00:10.0: bridge 32bit mmio: [0xf6000000-0xfbffffff]
[ 0.704590] pci 0000:00:10.0: bridge 64bit mmio pref: [0xd0000000-0xefffffff]
[ 0.704626] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.704629] pci 0000:03:00.0: PME# disabled
[ 0.704666] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
[ 0.704669] pci 0000:03:02.0: PME# disabled
[ 0.704694] pci 0000:02:00.0: bridge io port: [0xc000-0xdfff]
[ 0.704696] pci 0000:02:00.0: bridge 32bit mmio: [0xf6000000-0xfbffffff]
[ 0.704701] pci 0000:02:00.0: bridge 64bit mmio pref: [0xd0000000-0xefffffff]
[ 0.704739] pci 0000:04:00.0: reg 10 32bit mmio: [0xf8000000-0xf8ffffff]
[ 0.704751] pci 0000:04:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.704762] pci 0000:04:00.0: reg 1c 64bit mmio: [0xf6000000-0xf7ffffff]
[ 0.704769] pci 0000:04:00.0: reg 24 io port: [0xdc00-0xdc7f]
[ 0.704776] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xf9fe0000-0xf9ffffff]
[ 0.704842] pci 0000:03:00.0: bridge io port: [0xd000-0xdfff]
[ 0.704845] pci 0000:03:00.0: bridge 32bit mmio: [0xf6000000-0xf9ffffff]
[ 0.704849] pci 0000:03:00.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.704876] pci 0000:03:02.0: bridge io port: [0xc000-0xcfff]
[ 0.704879] pci 0000:03:02.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[ 0.704883] pci 0000:03:02.0: bridge 64bit mmio pref: [0xeff00000-0xefffffff]
[ 0.704947] pci 0000:00:13.0: bridge io port: [0xb000-0xbfff]
[ 0.704954] pci 0000:00:13.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.704967] pci 0000:00:13.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.705007] pci 0000:07:00.0: reg 10 io port: [0xac00-0xac07]
[ 0.705013] pci 0000:07:00.0: reg 14 io port: [0xa800-0xa803]
[ 0.705019] pci 0000:07:00.0: reg 18 io port: [0xa400-0xa407]
[ 0.705024] pci 0000:07:00.0: reg 1c io port: [0xa000-0xa003]
[ 0.705030] pci 0000:07:00.0: reg 20 io port: [0x9c00-0x9c0f]
[ 0.705036] pci 0000:07:00.0: reg 24 32bit mmio: [0xfdaff000-0xfdaff3ff]
[ 0.705063] pci 0000:07:00.0: supports D1
[ 0.705065] pci 0000:07:00.0: PME# supported from D0 D1 D3hot
[ 0.705068] pci 0000:07:00.0: PME# disabled
[ 0.705120] pci 0000:00:14.0: bridge io port: [0x9000-0xafff]
[ 0.705127] pci 0000:00:14.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
[ 0.705140] pci 0000:00:14.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff]
[ 0.705182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.705537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.889568] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.889815] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 *7 9 10 11 14 15)
[ 0.890065] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
[ 0.890303] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.890542] ACPI: PCI Interrupt Link [LE0A] (IRQs 5 7 9 10 *11 14 15)
[ 0.890779] ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.891017] ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.891254] ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.891493] ACPI: PCI Interrupt Link [LE1A] (IRQs *5 7 9 10 11 14 15)
[ 0.891731] ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.891968] ACPI: PCI Interrupt Link [LE1C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.892207] ACPI: PCI Interrupt Link [LE1D] (IRQs 5 *7 9 10 11 14 15)
[ 0.892446] ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.892684] ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.892922] ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.893161] ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.893399] ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.893637] ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.893875] ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.894113] ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.894352] ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 10 *11 14 15)
[ 0.894589] ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.894827] ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.895067] ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.895305] ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.895543] ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.895781] ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.896019] ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.896257] ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.896495] ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.896733] ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.896972] ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.897210] ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.897449] ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.897688] ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.897927] ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.898166] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.898405] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.898646] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.898884] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.899122] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.899360] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.899598] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[ 0.899836] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 0.900085] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15)
[ 0.900322] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.900559] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.900798] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[ 0.901075] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.901345] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.901612] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.901879] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.902146] ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0
[ 0.902415] ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0, disabled.
[ 0.902682] ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled.
[ 0.902950] ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled.
[ 0.903216] ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0
[ 0.903483] ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled.
[ 0.903750] ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0, disabled.
[ 0.904017] ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0
[ 0.904285] ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled.
[ 0.904553] ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled.
[ 0.904820] ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled.
[ 0.905090] ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled.
[ 0.905357] ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled.
[ 0.905624] ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled.
[ 0.905891] ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled.
[ 0.906158] ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled.
[ 0.906425] ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0
[ 0.906692] ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled.
[ 0.906959] ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled.
[ 0.907227] ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled.
[ 0.907494] ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled.
[ 0.907762] ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled.
[ 0.908029] ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled.
[ 0.908296] ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled.
[ 0.908563] ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled.
[ 0.908831] ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled.
[ 0.909098] ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled.
[ 0.909366] ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled.
[ 0.909633] ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled.
[ 0.909901] ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled.
[ 0.910180] ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled.
[ 0.910448] ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled.
[ 0.910716] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled.
[ 0.910984] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0, disabled.
[ 0.911253] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0, disabled.
[ 0.911523] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0, disabled.
[ 0.911795] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0, disabled.
[ 0.912064] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.912332] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
[ 0.912601] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.912868] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 0.913137] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.913405] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.913673] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.913795] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.913798] vgaarb: loaded
[ 0.913882] SCSI subsystem initialized
[ 0.913920] libata version 3.00 loaded.
[ 0.913920] usbcore: registered new interface driver usbfs
[ 0.913920] usbcore: registered new interface driver hub
[ 0.913920] usbcore: registered new device driver usb
[ 0.913920] ACPI: WMI: Mapper loaded
[ 0.913920] PCI: Using ACPI for IRQ routing
[ 0.913920] Bluetooth: Core ver 2.15
[ 0.913920] NET: Registered protocol family 31
[ 0.913920] Bluetooth: HCI device and connection manager initialized
[ 0.913920] Bluetooth: HCI socket layer initialized
[ 0.913920] NetLabel: Initializing
[ 0.913920] NetLabel: domain hash size = 128
[ 0.913920] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.913920] NetLabel: unlabeled traffic allowed by default
[ 0.913920] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.913920] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.930008] Switching to clocksource tsc
[ 0.931274] pnp: PnP ACPI init
[ 0.931290] ACPI: bus type pnp registered
[ 0.940267] pnp: PnP ACPI: found 11 devices
[ 0.940269] ACPI: ACPI bus type pnp unregistered
[ 0.940279] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.940282] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.940284] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.940287] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.940289] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.940292] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.940295] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
[ 0.940300] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.940303] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.940305] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.940311] system 00:09: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.940315] system 00:0a: iomem range 0xd2a00-0xd3fff has been reserved
[ 0.940318] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.940320] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.940323] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
[ 0.940325] system 00:0a: iomem range 0xfeff0000-0xfeff00ff has been reserved
[ 0.940328] system 00:0a: iomem range 0xbfee0000-0xbfefffff could not be reserved
[ 0.940331] system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.940333] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.940336] system 00:0a: iomem range 0x100000-0xbfedffff could not be reserved
[ 0.940339] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.940341] system 00:0a: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.940344] system 00:0a: iomem range 0xfefff000-0xfeffffff has been reserved
[ 0.940347] system 00:0a: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.940349] system 00:0a: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.940352] system 00:0a: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.944997] AppArmor: AppArmor Filesystem Enabled
[ 0.945083] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[ 0.945086] pci 0000:00:08.0: IO window: 0xe000-0xefff
[ 0.945090] pci 0000:00:08.0: MEM window: 0xfde00000-0xfdefffff
[ 0.945093] pci 0000:00:08.0: PREFETCH window: 0xfdd00000-0xfddfffff
[ 0.945098] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
[ 0.945101] pci 0000:03:00.0: IO window: 0xd000-0xdfff
[ 0.945104] pci 0000:03:00.0: MEM window: 0xf6000000-0xf9ffffff
[ 0.945108] pci 0000:03:00.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.945113] pci 0000:03:02.0: PCI bridge, secondary bus 0000:05
[ 0.945115] pci 0000:03:02.0: IO window: 0xc000-0xcfff
[ 0.945119] pci 0000:03:02.0: MEM window: 0xfbf00000-0xfbffffff
[ 0.945122] pci 0000:03:02.0: PREFETCH window: 0x000000eff00000-0x000000efffffff
[ 0.945126] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[ 0.945129] pci 0000:02:00.0: IO window: 0xc000-0xdfff
[ 0.945132] pci 0000:02:00.0: MEM window: 0xf6000000-0xfbffffff
[ 0.945136] pci 0000:02:00.0: PREFETCH window: 0x000000d0000000-0x000000efffffff
[ 0.945140] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02
[ 0.945145] pci 0000:00:10.0: IO window: 0xc000-0xdfff
[ 0.945154] pci 0000:00:10.0: MEM window: 0xf6000000-0xfbffffff
[ 0.945162] pci 0000:00:10.0: PREFETCH window: 0x000000d0000000-0x000000efffffff
[ 0.945174] pci 0000:00:13.0: PCI bridge, secondary bus 0000:06
[ 0.945179] pci 0000:00:13.0: IO window: 0xb000-0xbfff
[ 0.945188] pci 0000:00:13.0: MEM window: 0xfdc00000-0xfdcfffff
[ 0.945196] pci 0000:00:13.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[ 0.945208] pci 0000:00:14.0: PCI bridge, secondary bus 0000:07
[ 0.945213] pci 0000:00:14.0: IO window: 0x9000-0xafff
[ 0.945223] pci 0000:00:14.0: MEM window: 0xfda00000-0xfdafffff
[ 0.945230] pci 0000:00:14.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff
[ 0.945247] pci 0000:00:08.0: setting latency timer to 64
[ 0.945639] ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16
[ 0.945643] alloc irq_desc for 16 on node 0
[ 0.945645] alloc kstat_irqs on node 0
[ 0.945652] pci 0000:00:10.0: PCI INT A -> Link[AE0A] -> GSI 16 (level, low) -> IRQ 16
[ 0.945660] pci 0000:00:10.0: setting latency timer to 64
[ 0.945669] pci 0000:02:00.0: setting latency timer to 64
[ 0.945675] pci 0000:03:00.0: setting latency timer to 64
[ 0.945682] pci 0000:03:02.0: setting latency timer to 64
[ 0.946062] ACPI: PCI Interrupt Link [AE3A] enabled at IRQ 16
[ 0.946065] pci 0000:00:13.0: PCI INT A -> Link[AE3A] -> GSI 16 (level, low) -> IRQ 16
[ 0.946073] pci 0000:00:13.0: setting latency timer to 64
[ 0.946452] ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16
[ 0.946455] pci 0000:00:14.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16
[ 0.946463] pci 0000:00:14.0: setting latency timer to 64
[ 0.946469] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.946471] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.946474] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.946476] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.946478] pci_bus 0000:01: resource 2 pref mem [0xfdd00000-0xfddfffff]
[ 0.946480] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.946483] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.946485] pci_bus 0000:02: resource 0 io: [0xc000-0xdfff]
[ 0.946487] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xfbffffff]
[ 0.946490] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xefffffff]
[ 0.946492] pci_bus 0000:03: resource 0 io: [0xc000-0xdfff]
[ 0.946494] pci_bus 0000:03: resource 1 mem: [0xf6000000-0xfbffffff]
[ 0.946496] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xefffffff]
[ 0.946499] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.946501] pci_bus 0000:04: resource 1 mem: [0xf6000000-0xf9ffffff]
[ 0.946503] pci_bus 0000:04: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.946506] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff]
[ 0.946508] pci_bus 0000:05: resource 1 mem: [0xfbf00000-0xfbffffff]
[ 0.946510] pci_bus 0000:05: resource 2 pref mem [0xeff00000-0xefffffff]
[ 0.946512] pci_bus 0000:06: resource 0 io: [0xb000-0xbfff]
[ 0.946514] pci_bus 0000:06: resource 1 mem: [0xfdc00000-0xfdcfffff]
[ 0.946517] pci_bus 0000:06: resource 2 pref mem [0xfdb00000-0xfdbfffff]
[ 0.946519] pci_bus 0000:07: resource 0 io: [0x9000-0xafff]
[ 0.946521] pci_bus 0000:07: resource 1 mem: [0xfda00000-0xfdafffff]
[ 0.946524] pci_bus 0000:07: resource 2 pref mem [0xfd900000-0xfd9fffff]
[ 0.946557] NET: Registered protocol family 2
[ 0.946706] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.947761] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.950545] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.950890] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.950892] TCP reno registered
[ 0.950983] NET: Registered protocol family 1
[ 1.000010] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 1.000109] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.000214] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.000324] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 1.000529] pci 0000:04:00.0: Boot video device
[ 1.000576] Trying to unpack rootfs image as initramfs...
[ 1.177986] Freeing initrd memory: 8350k freed
[ 1.180948] PCI-DMA: Disabling AGP.
[ 1.181038] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 1.181040] PCI-DMA: using GART IOMMU.
[ 1.181043] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.182750] Scanning for low memory corruption every 60 seconds
[ 1.182861] audit: initializing netlink socket (disabled)
[ 1.182872] type=2000 audit(1259510816.180:1): initialized
[ 1.191122] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.192240] VFS: Disk quotas dquot_6.5.2
[ 1.192285] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.192794] fuse init (API version 7.13)
[ 1.192859] msgmni has been set to 7927
[ 1.193089] alg: No test for stdrng (krng)
[ 1.193099] io scheduler noop registered
[ 1.193101] io scheduler anticipatory registered
[ 1.193103] io scheduler deadline registered
[ 1.193135] io scheduler cfq registered (default)
[ 1.193470] alloc irq_desc for 24 on node 0
[ 1.193474] alloc kstat_irqs on node 0
[ 1.193494] pcieport 0000:00:10.0: irq 24 for MSI/MSI-X
[ 1.193513] pcieport 0000:00:10.0: setting latency timer to 64
[ 1.193923] alloc irq_desc for 25 on node 0
[ 1.193925] alloc kstat_irqs on node 0
[ 1.193941] pcieport 0000:00:13.0: irq 25 for MSI/MSI-X
[ 1.193960] pcieport 0000:00:13.0: setting latency timer to 64
[ 1.194342] alloc irq_desc for 26 on node 0
[ 1.194343] alloc kstat_irqs on node 0
[ 1.194359] pcieport 0000:00:14.0: irq 26 for MSI/MSI-X
[ 1.194377] pcieport 0000:00:14.0: setting latency timer to 64
[ 1.194680] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.194698] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.194819] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.194822] ACPI: Power Button [PWRB]
[ 1.194881] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.194883] ACPI: Power Button [PWRF]
[ 1.194932] fan PNP0C0B:00: registered as cooling_device0
[ 1.194937] ACPI: Fan [FAN] (on)
[ 1.195566] processor LNXCPU:00: registered as cooling_device1
[ 1.195592] processor LNXCPU:01: registered as cooling_device2
[ 1.195617] processor LNXCPU:02: registered as cooling_device3
[ 1.195643] processor LNXCPU:03: registered as cooling_device4
[ 1.205467] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20090903/nspredef-1012)
[ 1.205474] ACPI: Expecting a [Reference] package element, found type 0
[ 1.205476] ACPI: Invalid passive threshold
[ 1.205935] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.205941] ACPI: Thermal Zone [THRM] (40 C)
[ 1.206911] Linux agpgart interface v0.103
[ 1.206915] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.207007] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.207229] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.207945] brd: module loaded
[ 1.208271] loop: module loaded
[ 1.208324] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.208428] ahci 0000:00:09.0: version 3.0
[ 1.208829] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 1.208832] alloc irq_desc for 23 on node 0
[ 1.208834] alloc kstat_irqs on node 0
[ 1.208842] ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 1.208873] alloc irq_desc for 27 on node 0
[ 1.208874] alloc kstat_irqs on node 0
[ 1.208879] ahci 0000:00:09.0: irq 27 for MSI/MSI-X
[ 1.208931] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.208935] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio boh
[ 1.208937] ahci 0000:00:09.0: setting latency timer to 64
[ 1.209236] scsi0 : ahci
[ 1.209326] scsi1 : ahci
[ 1.209371] scsi2 : ahci
[ 1.209414] scsi3 : ahci
[ 1.209463] scsi4 : ahci
[ 1.209509] scsi5 : ahci
[ 1.209651] ata1: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 27
[ 1.209653] ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 27
[ 1.209656] ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 27
[ 1.209658] ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 27
[ 1.209660] ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 27
[ 1.209663] ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 27
[ 1.209914] pata_amd 0000:00:06.0: version 0.4.1
[ 1.209941] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.210011] scsi6 : pata_amd
[ 1.210058] scsi7 : pata_amd
[ 1.210670] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.210673] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.210899] pata_marvell 0000:07:00.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16
[ 1.210920] pata_marvell 0000:07:00.0: setting latency timer to 64
[ 1.210971] scsi8 : pata_marvell
[ 1.211015] scsi9 : pata_marvell
[ 1.211041] ata9: PATA max UDMA/100 cmd 0xac00 ctl 0xa800 bmdma 0x9c00 irq 16
[ 1.211044] ata10: PATA max UDMA/133 cmd 0xa400 ctl 0xa000 bmdma 0x9c08 irq 16
[ 1.211452] Fixed MDIO Bus: probed
[ 1.211479] PPP generic driver version 2.4.2
[ 1.211546] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.211976] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
[ 1.211979] alloc irq_desc for 22 on node 0
[ 1.211981] alloc kstat_irqs on node 0
[ 1.211988] ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
[ 1.212000] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.212002] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.212056] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.212077] ehci_hcd 0000:00:02.1: debug port 1
[ 1.212084] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.212099] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[ 1.230016] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.230073] usb usb1: configuration #1 chosen from 1 choice
[ 1.230096] hub 1-0:1.0: USB hub found
[ 1.230102] hub 1-0:1.0: 6 ports detected
[ 1.230418] ACPI: PCI Interrupt Link [AU2B] disabled and referenced, BIOS bug
[ 1.230578] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 21
[ 1.230581] alloc irq_desc for 21 on node 0
[ 1.230582] alloc kstat_irqs on node 0
[ 1.230589] ehci_hcd 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 21 (level, low) -> IRQ 21
[ 1.230598] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 1.230601] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 1.230629] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 1.230647] ehci_hcd 0000:00:04.1: debug port 1
[ 1.230653] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 1.230668] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfe02c000
[ 1.250006] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 1.250046] usb usb2: configuration #1 chosen from 1 choice
[ 1.250067] hub 2-0:1.0: USB hub found
[ 1.250073] hub 2-0:1.0: 6 ports detected
[ 1.250119] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.250549] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 20
[ 1.250551] alloc irq_desc for 20 on node 0
[ 1.250553] alloc kstat_irqs on node 0
[ 1.250560] ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 20 (level, low) -> IRQ 20
[ 1.250569] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 1.250572] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.250599] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 1.250619] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
[ 1.312049] usb usb3: configuration #1 chosen from 1 choice
[ 1.312068] hub 3-0:1.0: USB hub found
[ 1.312074] hub 3-0:1.0: 6 ports detected
[ 1.312532] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 23
[ 1.312535] ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 23 (level, low) -> IRQ 23
[ 1.312543] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 1.312546] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 1.312577] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 1.312596] ohci_hcd 0000:00:04.0: irq 23, io mem 0xfe02d000
[ 1.372049] usb usb4: configuration #1 chosen from 1 choice
[ 1.372068] hub 4-0:1.0: USB hub found
[ 1.372074] hub 4-0:1.0: 6 ports detected
[ 1.372121] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.372199] PNP: No PS/2 controller found. Probing ports directly.
[ 1.372646] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.372652] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.372695] mice: PS/2 mouse device common for all mice
[ 1.372746] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 1.372771] rtc_cmos 00:05: RTC can wake from S4
[ 1.372796] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.372857] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.372956] device-mapper: uevent: version 1.0.3
[ 1.373056] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: <email address hidden>
[ 1.373158] device-mapper: multipath: version 1.1.0 loaded
[ 1.373161] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.373384] cpuidle: using governor ladder
[ 1.373386] cpuidle: using governor menu
[ 1.373712] TCP cubic registered
[ 1.373817] NET: Registered protocol family 10
[ 1.374220] lo: Disabled Privacy Extensions
[ 1.374472] NET: Registered protocol family 17
[ 1.374488] Bluetooth: L2CAP ver 2.14
[ 1.374490] Bluetooth: L2CAP socket layer initialized
[ 1.374492] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.374493] Bluetooth: SCO socket layer initialized
[ 1.374527] Bluetooth: RFCOMM TTY layer initialized
[ 1.374530] Bluetooth: RFCOMM socket layer initialized
[ 1.374532] Bluetooth: RFCOMM ver 1.11
[ 1.382855] powernow-k8: Found 1 AMD Phenom(tm) 9550 Quad-Core Processor processors (4 cpu cores) (version 2.20.00)
[ 1.382887] powernow-k8: 0 : pstate 0 (2200 MHz)
[ 1.382889] powernow-k8: 1 : pstate 1 (1100 MHz)
[ 1.383210] PM: Resume from disk failed.
[ 1.383220] registered taskstats version 1
[ 1.383783] Magic number: 1:971:136
[ 1.383796] block ram1: hash matches
[ 1.383899] rtc_cmos 00:05: setting system clock to 2009-11-29 16:06:57 UTC (1259510817)
[ 1.383902] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.383904] EDD information not available.
[ 1.551261] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.551286] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.551289] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.551302] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.730009] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.730012] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.730961] ata1.00: ATA-8: Hitachi HDP725032GLA360, GM3OA52A, max UDMA/133
[ 1.730965] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.732084] ata1.00: configured for UDMA/133
[ 1.732171] scsi 0:0:0:0: Direct-Access ATA Hitachi HDP72503 GM3O PQ: 0 ANSI: 5
[ 1.732290] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.732362] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.732393] sd 0:0:0:0: [sda] Write Protect is off
[ 1.732396] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.732412] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.732503] sda:
[ 1.743360] ata3.00: ATAPI: LITE-ON DVDRW LH-20A1L, BL06, max UDMA/100, ATAPI AN
[ 1.756524] sda1 sda2 sda3
[ 1.756694] ata3.00: configured for UDMA/100
[ 1.756756] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.759764] scsi 2:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1L BL06 PQ: 0 ANSI: 5
[ 1.765591] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.765594] Uniform CD-ROM driver Revision: 3.20
[ 1.765647] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.765684] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.765780] ata8: port disabled. ignoring.
[ 1.830008] usb 3-3: new low speed USB device using ohci_hcd and address 2
[ 1.930994] Freeing unused kernel memory: 692k freed
[ 1.931186] Write protecting the kernel read-only data: 7836k
[ 2.061116] usb 3-3: configuration #1 chosen from 1 choice
[ 2.071710] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 2.071716] alloc irq_desc for 18 on node 0
[ 2.071718] alloc kstat_irqs on node 0
[ 2.071728] ohci1394 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[ 2.071951] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 2.072373] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 2.072377] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
[ 2.072381] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 2.077176] usbcore: registered new interface driver hiddev
[ 2.083188] input: Microsoft Comfort Optical Mouse 1000 as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input3
[ 2.083312] generic-usb 0003:045E:00F6.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:02.0-3/input0
[ 2.083338] usbcore: registered new interface driver usbhid
[ 2.083363] usbhid: v2.6:USB HID core driver
[ 2.132079] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 2.463758] usb 4-3: new low speed USB device using ohci_hcd and address 2
[ 2.600732] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:1f:c6:73:c8:bc
[ 2.600736] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[ 2.689000] usb 4-3: configuration #1 chosen from 1 choice
[ 2.700134] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/input/input4
[ 2.700183] generic-usb 0003:062A:0201.0002: input,hidraw1: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:04.0-3/input0
[ 2.710246] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.1/input/input5
[ 2.710334] generic-usb 0003:062A:0201.0003: input,hiddev96,hidraw2: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:04.0-3/input1
[ 3.462647] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c000134f186]
[ 3.773689] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[ 3.773694] EXT4-fs (sda2): write access will be enabled during recovery
[ 7.799161] EXT4-fs (sda2): orphan cleanup on readonly fs
[ 7.799170] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 2005
[ 7.811584] EXT4-fs (sda2): 1 orphan inode deleted
[ 7.811587] EXT4-fs (sda2): recovery complete
[ 7.971484] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 8.410894] type=1505 audit(1259510824.519:2): operation="profile_load" pid=549 name=/usr/share/gdm/guest-session/Xsession
[ 8.412640] type=1505 audit(1259510824.527:3): operation="profile_load" pid=550 name=/sbin/dhclient3
[ 8.412900] type=1505 audit(1259510824.527:4): operation="profile_load" pid=550 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 8.413048] type=1505 audit(1259510824.527:5): operation="profile_load" pid=550 name=/usr/lib/connman/scripts/dhclient-script
[ 8.452473] type=1505 audit(1259510824.559:6): operation="profile_load" pid=551 name=/usr/bin/evince
[ 8.456649] type=1505 audit(1259510824.569:7): operation="profile_load" pid=551 name=/usr/bin/evince-previewer
[ 8.459147] type=1505 audit(1259510824.569:8): operation="profile_load" pid=551 name=/usr/bin/evince-thumbnailer
[ 8.478844] type=1505 audit(1259510824.589:9): operation="profile_load" pid=553 name=/usr/lib/cups/backend/cups-pdf
[ 8.479163] type=1505 audit(1259510824.589:10): operation="profile_load" pid=553 name=/usr/sbin/cupsd
[ 8.481065] type=1505 audit(1259510824.589:11): operation="profile_load" pid=554 name=/usr/sbin/tcpdump
[ 10.480458] udev: starting version 147
[ 11.197745] lp: driver loaded but no devices found
[ 12.448238] EDAC MC: Ver: 2.1.0 Nov 23 2009
[ 12.450583] EDAC amd64_edac: Ver: 3.2.0 Nov 23 2009
[ 12.514000] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 12.514006] ACPI: I/O resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM00 [0x1c40-0x1c7f]
[ 12.514009] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.514011] nForce2_smbus 0000:00:01.1: Error probing SMB2.
[ 12.514082] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 12.514090] EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded.
[ 12.514091] Either Enable ECC in the BIOS, or set 'ecc_enable_override'.
[ 12.514092] Also, use of the override can cause unknown side effects.
[ 12.514104] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 12.543230] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.092760] nvidia: module license 'NVIDIA' taints kernel.
[ 13.092764] Disabling lock debugging due to kernel taint
[ 13.552916] rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.562393] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 13.562399] alloc irq_desc for 17 on node 0
[ 13.562401] alloc kstat_irqs on node 0
[ 13.562411] rt2860 0000:01:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 13.562603]
[ 13.562604]
[ 13.562604] === pAd = ffffc90005095000, size = 627064 ===
[ 13.562605]
[ 13.562607] <-- RTMPAllocAdapterBlock, Status=0
[ 13.642316] nvidia 0000:04:00.0: PCI INT A -> Link[AE0A] -> GSI 16 (level, low) -> IRQ 16
[ 13.642326] nvidia 0000:04:00.0: setting latency timer to 64
[ 13.642542] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.42 Tue Oct 20 20:25:42 PDT 2009
[ 14.060475] it87: Found IT8716F chip at 0x290, revision 3
[ 14.060486] it87: in3 is VCC (+5V)
[ 14.060487] it87: in7 is VCCH (+5V Stand-By)
[ 14.060521] ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region HWRE [0x295-0x296]
[ 14.060524] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.322286] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.401276] it87: Found IT8716F chip at 0x290, revision 3
[ 14.401288] it87: in3 is VCC (+5V)
[ 14.401289] it87: in7 is VCCH (+5V Stand-By)
[ 14.401334] ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region HWRE [0x295-0x296]
[ 14.401338] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.445401] it87: Found IT8716F chip at 0x290, revision 3
[ 14.445412] it87: in3 is VCC (+5V)
[ 14.445413] it87: in7 is VCCH (+5V Stand-By)
[ 14.445703] ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region HWRE [0x295-0x296]
[ 14.445706] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.688632] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
[ 15.688639] HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
[ 15.688688] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 17.459767] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 18.104585] hda_codec: AD1988B: BIOS auto-probing.
[ 18.104668] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input6
[ 18.573582] type=1505 audit(1259536034.686:12): operation="profile_replace" pid=1048 name=/usr/share/gdm/guest-session/Xsession
[ 18.574939] type=1505 audit(1259536034.686:13): operation="profile_replace" pid=1049 name=/sbin/dhclient3
[ 18.575202] type=1505 audit(1259536034.686:14): operation="profile_replace" pid=1049 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 18.575349] type=1505 audit(1259536034.686:15): operation="profile_replace" pid=1049 name=/usr/lib/connman/scripts/dhclient-script
[ 18.578258] type=1505 audit(1259536034.686:16): operation="profile_replace" pid=1050 name=/usr/bin/evince
[ 18.582909] type=1505 audit(1259536034.686:17): operation="profile_replace" pid=1050 name=/usr/bin/evince-previewer
[ 18.585409] type=1505 audit(1259536034.699:18): operation="profile_replace" pid=1050 name=/usr/bin/evince-thumbnailer
[ 18.590270] type=1505 audit(1259536034.699:19): operation="profile_replace" pid=1052 name=/usr/lib/cups/backend/cups-pdf
[ 18.590589] type=1505 audit(1259536034.699:20): operation="profile_replace" pid=1052 name=/usr/sbin/cupsd
[ 18.592139] type=1505 audit(1259536034.699:21): operation="profile_replace" pid=1053 name=/usr/sbin/tcpdump
[ 20.071289] usplash:487 freeing invalid memtype fffffffff7000000-fffffffff7e00000
[ 21.142745] RX DESC ffff88003785f000 size = 2048
[ 21.142995] <-- RTMPAllocTxRxRingMemory, Status=0
[ 21.146037] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 21.146040] 1. Phy Mode = 0
[ 21.146041] 2. Phy Mode = 0
[ 21.158532] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 21.162318] 3. Phy Mode = 0
[ 21.184813] MCS Set = 00 00 00 00 00
[ 21.186371] <==== RTMPInitialize, Status=0
[ 21.186433] 0x1300 = 00073200
[ 21.415317] alloc irq_desc for 28 on node 0
[ 21.415321] alloc kstat_irqs on node 0
[ 21.415329] forcedeth 0000:00:0a.0: irq 28 for MSI/MSI-X
[ 21.415522] eth0: no link during initialization.
[ 21.416327] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.264089] kvm: Nested Virtualization enabled
[ 25.264355] kvm: Nested Paging enabled
[ 27.068292] ppdev: user-space parallel port driver
[ 27.999365] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 908
[ 30.243757] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[ 31.583755] wlan0: no IPv6 routers present
[ 47.893785] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 710
[ 62.642972] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 710
[ 62.643116] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=6)
[ 75.543767] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[ 76.551573] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[ 77.338963] evolution-data-[2221]: segfault at 60 ip 00007f60b75e3bc0 sp 00007f60b1fb6b60 error 6 in libecalbackendfile.so[7f60b75d8000+e000]
[ 77.583766] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[ 77.896952] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 991
[ 78.603759] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[ 79.623761] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[ 80.647700] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[ 81.671877] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[ 82.703761] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[ 83.723767] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[ 84.753768] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[ 90.039645] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 480
[ 90.039781] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=6)
[ 111.240027] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[ 117.894244] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 710
[ 141.060056] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 710
[ 141.060293] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=6)
[ 157.903627] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 710

Revision history for this message
Best actionparsnip (andrew-woodhead666) said : 		#3

looks fine kid. Seems all the mounts are ok, although sda3 mounts a little later

Revision history for this message
Seth Hikari (sethhikari) said : 		#4

Thanks actionparsnip, that solved my question.