Ubuntu

SD Card not found in Karmic

Asked by gvnmcknz

LG X110 (MSI Wind clone), Upgraded from 9.04 to 9.10.

SD card not recognised when put in reader slot, worked fine in 9.04.

Any ideas?

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Solved by:
gvnmcknz
Solved:
Last query:
Last reply:
Revision history for this message
actionparsnip (andrew-woodhead666) said : 		#1

OK then you need to first work out if the card is at fault or the new release:

remove the card and wait 10 seconds
pust the card into the syste and wait 10 seconds

run:

dmesg | tail

post the output here. Has the card ben in a Windows Machine? If so did you use the safetly remove hardware feature or did you just wrench the card out of the system like most users do. The safetly remove hardware step is NECESSARY to getting things working.

Revision history for this message
gvnmcknz (gvnmcknz) said : 		#2

Last time working was in 9.04 earlier today.
Result of dmesg below.
It also fails to shut down properly, which it did before upgrade.
Thanks for your help

[ 2866.302103] PM: Entering mem sleep
[ 2866.302125] Suspending console(s) (use no_console_suspend to debug)
[ 2866.302358] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2866.781210] sd 0:0:0:0: [sda] Stopping disk
[ 2867.760731] uvcvideo: Failed to set UVC commit control : -108 (exp. 26).
[ 2867.760746] uvcvideo 1-5:1.1: resume error -5
[ 2867.760770] pm_op(): usb_dev_suspend+0x0/0x10 returns -108
[ 2867.760781] PM: Device 1-5 failed to suspend: error -108
[ 2867.760789] PM: Some devices failed to suspend
[ 2867.760870] sd 0:0:0:0: [sda] Starting disk
[ 2868.318443] uvcvideo: Failed to set UVC commit control : -108 (exp. 26).
[ 2868.318457] uvcvideo 1-5:1.1: resume error -5
[ 2868.476341] PM: resume devices took 0.716 seconds
[ 2868.476379] PM: Finishing wakeup.
[ 2868.476388] Restarting tasks ... done.
[ 2868.603526] r8169: eth0: link down
[ 2868.604112] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2868.606272] r8180: Bringing up iface
[ 2868.804861] r8180: Card successfully reset
[ 2869.546324] r8180: WIRELESS_MODE_G
[ 2869.546330]
[ 2869.560736] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2869.831900] CPU0 attaching NULL sched-domain.
[ 2869.831911] CPU1 attaching NULL sched-domain.

e.
[ 2866.302103] PM: Entering mem sleep
[ 2866.302125] Suspending console(s) (use no_console_suspend to debug)
[ 2866.302358] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2866.781210] sd 0:0:0:0: [sda] Stopping disk
[ 2867.760731] uvcvideo: Failed to set UVC commit control : -108 (exp. 26).
[ 2867.760746] uvcvideo 1-5:1.1: resume error -5
[ 2867.760770] pm_op(): usb_dev_suspend+0x0/0x10 returns -108
[ 2867.760781] PM: Device 1-5 failed to suspend: error -108
[ 2867.760789] PM: Some devices failed to suspend
[ 2867.760870] sd 0:0:0:0: [sda] Starting disk
[ 2868.318443] uvcvideo: Failed to set UVC commit control : -108 (exp. 26).
[ 2868.318457] uvcvideo 1-5:1.1: resume error -5
[ 2868.476341] PM: resume devices took 0.716 seconds
[ 2868.476379] PM: Finishing wakeup.
[ 2868.476388] Restarting tasks ... done.
[ 2868.603526] r8169: eth0: link down
[ 2868.604112] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2868.606272] r8180: Bringing up iface
[ 2868.804861] r8180: Card successfully reset
[ 2869.546324] r8180: WIRELESS_MODE_G
[ 2869.546330]
[ 2869.560736] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2869.831900] CPU0 attaching NULL sched-domain.
[ 2869.831911] CPU1 attaching NULL sched-domain.

Revision history for this message
gvnmcknz (gvnmcknz) said : 		#3

Reverted to 9.04
Problems resolved.
Will maybe try again with a clean install.
Thank you for your help.
gvnmcknz