How to install AverTV Ultra 116 (CX23416) in Ubuntu 9.10

The card is also listed under http://ivtvdriver.org/index.php/Supported_hardware

What are the messages which say "unrecognized"? I don't see them in the info you included above. Something like this:

[ 13.865528] ivtv0: Unknown card: vendor/device: [4444:0016]
[ 13.865533] ivtv0: subsystem vendor/device: [1461:c034]
[ 13.865536] ivtv0: cx23416 based

If it is not recognized, you may need to submit this info to the ivtv-devel upstream group. If it is recognized, you may have a defective card (can you check it via windows?).

"unrecognised ivtv" messeges comes in the boot screen... i dont know how to copy that and paste here.

anyway, if the above dmesg and lspci outputs are correct how do i get the tuner to work in Ubuntu 9.10? I tried tv-time but it doesn't work for me.

also what are these type of errors due to?

[ 21.061693] wm8775 0-001b: I2C: cannot write 0c0 to register R21
[ 21.064740] wm8775 0-001b: I2C: cannot write 1d4 to register R14
[ 21.067745] wm8775 0-001b: I2C: cannot write 1d4 to register R15
[ 21.070781] wm8775 0-001b: I2C: cannot write 102 to register R21

Below is the whole dmesg | grep ivtv output:

[ 6.455399] ivtv: Start initialization, version 1.4.1
[ 6.455525] ivtv0: Initializing card 0
[ 6.455535] ivtv0: Unknown card: vendor/device: [4444:0016]
[ 6.455587] ivtv0: subsystem vendor/device: [1461:c01b]
[ 6.455636] ivtv0: cx23416 based
[ 6.455682] ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
[ 6.455730] ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of
[ 6.455782] ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)
[ 6.455833] ivtv0: Prefix your subject line with [UNKNOWN IVTV CARD].
[ 6.455970] ivtv 0000:02:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 6.455981] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[ 6.458086] ivtv0: Invalid EEPROM
[ 6.754089] cx25840 0-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0)
[ 6.864609] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
[ 6.940910] tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0)
[ 6.946294] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
[ 6.989553] IRQ 21/ivtv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 6.990105] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[ 6.990224] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[ 6.990336] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[ 6.990468] ivtv0: Registered device video24 for encoder PCM (320 kB)
[ 6.990578] ivtv0: Registered device radio0 for encoder radio
[ 6.990583] ivtv0: Initialized card: Hauppauge WinTV PVR-150
[ 6.991496] ivtv: End initialization
[ 7.636021] ivtv 0000:02:01.0: firmware: requesting v4l-cx2341x-enc.fw
[ 8.141200] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[ 8.340144] ivtv0: Encoder revision: 0x02060039

When i open tvtime I get the following error:

ivtv: Invalid argument
Cannot open capture device /dev/video0

Here is a picture of the card, it is also known as M113 PCI Analog TV I guess.
http://www.bttv-gallery.de/high/CardFront.jpg_avermedia_1461_c019_a.jpg
Its the same card that I have but having a different name. The chips and features all the same.

I found an interesting link here also... http://www.gossamer-threads.com/lists/ivtv/devel/40113?search_string=cx23416%20%20ubuntu%209.04;#40113

Still no solution, that I can follow up with. :(

Here is a supposed patch but I don't know how to apply it or use it...
http://linuxtv.org/hg/~awalls/ivtv/rev/ebb0ea04b057

This question was expired because it remained in the 'Open' state without activity for the last 15 days.