cpufreq

Asked by ap0stol

Sorry for my bad English. Ubuntu 9.04 (9.10 a5 up-to-date)

Firstly i've post ma problen in russian and second in English
----------- Russ -------------------
=) Вообщем дело такое: /etc/cpufreqd.conf - половина профилей закомменчены по дефолту

# cpufreq-info
hardware limits: 800 MHz - 2.20 GHz
current policy: frequency should be within 2.20 GHz and 2.20 GHz.
Губернатор performance. Выполняю комманду cpufreq-set -c 0(1) -g ondemand (powersafe). В итоге меняется

только название в выводе, а политика не меняется....
выполняю cpufreq-set -с 0(1) -g ondemand -d 800000 -u 2200000
Меняется и политика и частотные диапазоны. Но после увеличенной нагруки, вместо того чтобы менять

частота в пределах ondemand губрнатор меняется на performance. И ещё постоянно кулер жужжит....в винде

чтобы он зажужжал, надо пол часа в Mass Effect играть.... подскажите, кто знает )
-----------------------------------

In English

/etc/cpufreqd.conf Some Profiles is commented by default after installation. It's normal?

Then, next
# cpufreq-info
hardware limits: 800 MHz - 2.20 GHz
current policy: frequency should be within 2.20 GHz and 2.20 GHz.
The governor "performance" may decide which speed to use

# cpufreq-set -c 0(1) -g ondemand.
# cpufreq-info

hardware limits: 800 MHz - 2.20 GHz
current policy: frequency should be within 2.20 GHz and 2.20 GHz.
The governor "ondemand" may decide which speed to use

# cpufreq-set -с 0(1) -g ondemand -d 800000 -u 2200000
# cpufreq-info

hardware limits: 800 MHz - 2.20 GHz
current policy: frequency should be within 800 MHz and 2.20 GHz.
The governor "ondemand" may decide which speed to use

After that if cpu load to much cpufreq doesn't change CPU frequency it change a governor on performance:
# cpufreq-info
hardware limits: 800 MHz - 2.20 GHz
current policy: frequency should be within 2.20 GHz and 2.20 GHz.
The governor "performance" may decide which speed to use

My notebook (acer 5920g) is too hot in Ubuntu and cooler is loud. But in Windows book is cold and silence...

Question information

Language:
Russian Edit question
Status:
Answered
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
ap0stol (x777ozon) said :
#1

проц Intel T7300 SantaRosa

Revision history for this message
atany (ye-gorshkov) said :
#2

Мне кажется проблема в неправильных настройках cpufreqd.
Если он запущен, то смена режимов при помощи cpufreq-set не будет иметь эффекта, так как cpufreqd установит тот режим, который считает нужным :)

cpufreqd не имеет смысла использовать со стандартными настройками, он нужен в большинстве случаев для "тонкой" настройки (например, в зависимости от запущенных программ, либо для предотвращения сильного перегрева процессора).

Попробуйте удалить cpufreqd, оставить cpufrequtils и установить ondemand по умолчанию (настраивается в /etc/init.d/cpufrequtils).

Как вариант можно еще попробовать powernowd, который должен работать без дополнительных настроек.

Revision history for this message
ap0stol (x777ozon) said :
#3

powernowd + cpufrequtils работают

отдельно cpufreqd - нет. Сдаётся мне это изза lm-sensors (т.к. lm-sensors только частично поддерживают ICH8)

Revision history for this message
ap0stol (x777ozon) said :
#4

Тем более багу поспомтире приаттаченную

Revision history for this message
Vahaber (alphagoblin4) said :
#5

Масс Ефект клевая игруха)) сам сутками задротил в нее))

Can you help with this problem?

Provide an answer of your own, or ask ap0stol for more information if necessary.

To post a message you must log in.