Ubuntu

Macbook Pro 5,2 Express Card Slot IRQ 0 Error

Asked by SlickT10

I cannot load Express cards without getting irq errors such as this one for the Ubiquiti SRX Wireless card:

[ 12.429860] ath5k_pci 0000:06:00.0: PCI INT A -> GSI 0 (level, low) -> IRQ 0
[ 12.429868] ath5k_pci 0000:06:00.0: setting latency timer to 64
[ 12.429969] ath5k_pci 0000:06:00.0: registered as 'phy0'
[ 12.429972] ath5k phy0: request_irq failed
[ 12.429980] ath5k_pci 0000:06:00.0: PCI INT A disabled
[ 12.429984] ath5k_pci: probe of 0000:06:00.0 failed with error -16

Ive tried multiple cards, all with similar results. I am dual booting a Macbook Pro 5,2. Ive also had extensive troubleshooting sessions with other experts, and the fault seems not to be in the Modules. I know my express card slot works in OSX, and the cards work in other circumstances. Just to make sure I tried the ubuntu live cd on another comupter and had the express card inserted. It worked fine. I also tried BackTrack, a security suite built on ubuntu, and had injection working without further todo. The problem is tied to this slot in linux. None of the hardware seem to be defective.

Any help would be supremely appreciated. I will attach dmesg's for other cards as I am able.

Thanks

Question information

Language:
English Edit question
Status:
Expired
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
SlickT10 (nick4jesus) said : 		#1

Heres the response from SIIG FireWire 800 ExpressCard:

[ 4.012024] ohci1394 0000:0e:00.0: PCI INT A -> GSI 0 (level, low) -> IRQ 0
[ 4.061725] ohci1394: Failed to allocate interrupt 0
[ 4.063134] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:25:4b:bb:e7:6c
[ 4.063136] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 4.064006] ohci1394: probe of 0000:0e:00.0 failed with error -12

Revision history for this message
SlickT10 (nick4jesus) said : 		#2

Trying a third card, a card reader, which appears to load, ( I have not mounted any drive though). The key here, seems that cards that enumerated as USB work. So Express Cards in USB Mode work, but Express Cards in PCIE Mode error out on trying to set the device to IRQ 0.

There must be someone with enough knowlege to get this working. I know this slot works in other OS's.

Thanks in advance to anyone willing to take the time to help me on this.

Ive exausted all other resources.

Revision history for this message
SlickT10 (nick4jesus) said : 		#3

Heres the complete dmesg output:

[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-15-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 (Ubuntu 2.6.28-15.49-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000ae837000 (usable)
[ 0.000000] BIOS-e820: 00000000ae837000 - 00000000ae839000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ae839000 - 00000000ae83a000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ae83a000 - 00000000ae83c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ae83c000 - 00000000ae855000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ae855000 - 00000000aea56000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000aea56000 - 00000000afebb000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000afebb000 - 00000000afec7000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000afec7000 - 00000000afec8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000afec8000 - 00000000afeca000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000afeca000 - 00000000afecd000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000afecd000 - 00000000afed6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000afed6000 - 00000000afed7000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000afed7000 - 00000000afedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000afedf000 - 00000000afef9000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000afef9000 - 00000000afeff000 (reserved)
[ 0.000000] BIOS-e820: 00000000afeff000 - 00000000aff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000df500000 - 00000000df501000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000150000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xae837 max_arch_pfn = 0x100000
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000ae837000 (usable)
[ 0.000000] modified: 00000000ae837000 - 00000000ae839000 (ACPI NVS)
[ 0.000000] modified: 00000000ae839000 - 00000000ae83a000 (ACPI data)
[ 0.000000] modified: 00000000ae83a000 - 00000000ae83c000 (ACPI NVS)
[ 0.000000] modified: 00000000ae83c000 - 00000000ae855000 (ACPI data)
[ 0.000000] modified: 00000000ae855000 - 00000000aea56000 (ACPI NVS)
[ 0.000000] modified: 00000000aea56000 - 00000000afebb000 (ACPI data)
[ 0.000000] modified: 00000000afebb000 - 00000000afec7000 (ACPI NVS)
[ 0.000000] modified: 00000000afec7000 - 00000000afec8000 (ACPI data)
[ 0.000000] modified: 00000000afec8000 - 00000000afeca000 (ACPI NVS)
[ 0.000000] modified: 00000000afeca000 - 00000000afecd000 (ACPI data)
[ 0.000000] modified: 00000000afecd000 - 00000000afed6000 (ACPI NVS)
[ 0.000000] modified: 00000000afed6000 - 00000000afed7000 (ACPI data)
[ 0.000000] modified: 00000000afed7000 - 00000000afedf000 (ACPI NVS)
[ 0.000000] modified: 00000000afedf000 - 00000000afef9000 (ACPI data)
[ 0.000000] modified: 00000000afef9000 - 00000000afeff000 (reserved)
[ 0.000000] modified: 00000000afeff000 - 00000000aff00000 (ACPI data)
[ 0.000000] modified: 00000000df500000 - 00000000df501000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000150000000 (usable)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378be000 - 37fefcf4
[ 0.000000] Allocated new RAMDISK: 0087d000 - 00faecf4
[ 0.000000] Move RAMDISK from 00000000378be000 - 0000000037fefcf3 to 0087d000 - 00faecf3
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
[ 0.000000] ACPI: XSDT AFEEE1C0, 0074 (r1 APPLE Apple00 8E 1000013)
[ 0.000000] ACPI: FACP AFEEC000, 00F4 (r3 APPLE Apple00 8E Loki 5F)
[ 0.000000] ACPI: DSDT AFEDF000, 6473 (r1 APPLE MacBookP 50002 INTL 20061109)
[ 0.000000] ACPI: FACS AFECD000, 0040
[ 0.000000] ACPI: HPET AFEEB000, 0038 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: APIC AFEEA000, 0068 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: MCFG AFEE9000, 003C (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ASF! AFEE8000, 00A5 (r32 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SBST AFEE7000, 0030 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ECDT AFEE6000, 0053 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SSDT AFEC7000, 04DC (r1 APPLE CpuPm 3000 INTL 20061109)
[ 0.000000] ACPI: SSDT AFECC000, 00A5 (r1 SataRe SataPri 1000 INTL 20061109)
[ 0.000000] ACPI: SSDT AFECB000, 009F (r1 SataRe SataSec 1000 INTL 20061109)
[ 0.000000] ACPI: DMI BIOS year==0, assuming ACPI-capable machine
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1908MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac]
[ 0.000000] #4 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [000087d000 - 0000faecf4] NEW RAMDISK ==> [000087d000 - 0000faecf4]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x000ae837
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x00000007
[ 0.000000] 0: 0x00000010 -> 0x00000092
[ 0.000000] 0: 0x00000100 -> 0x000ae837
[ 0.000000] On node 0 totalpages: 714684
[ 0.000000] free_area_init_node: node 0, pgdat c06cb500, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3941 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 3817 pages used for memmap
[ 0.000000] HighMem zone: 484688 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at b0000000 (gap: aff00000:2f600000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 709099
[ 0.000000] Kernel command line: root=UUID=ec8e2e94-1441-4a2e-9d81-1a138ee21498 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2653.591 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 14296140 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 2805516k/2859228k available (4115k kernel code, 52328k reserved, 2199k data, 532k init, 1954020k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB)
[ 0.004000] .data : 0xc0504f5f - 0xc072ae60 (2199 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0504f5f (4115 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5307.18 BogoMIPS (lpj=10614364)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.019109] ACPI: Core revision 20080926
[ 0.021846] ACPI: Checking initramfs for custom DSDT
[ 0.397176] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.436876] CPU0: Intel(R) Core(TM)2 Duo CPU T9550 @ 2.66GHz stepping 0a
[ 0.440001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5306.70 BogoMIPS (lpj=10613418)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.525291] CPU1: Intel(R) Core(TM)2 Duo CPU T9550 @ 2.66GHz stepping 0a
[ 0.525313] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.528037] Brought up 2 CPUs
[ 0.528040] Total of 2 processors activated (10613.89 BogoMIPS).
[ 0.528109] CPU0 attaching sched-domain:
[ 0.528112] domain 0: span 0-1 level MC
[ 0.528115] groups: 0 1
[ 0.528122] CPU1 attaching sched-domain:
[ 0.528125] domain 0: span 0-1 level MC
[ 0.528127] groups: 1 0
[ 0.528204] net_namespace: 776 bytes
[ 0.528204] Booting paravirtualized kernel on bare hardware
[ 0.528370] Time: 4:21:51 Date: 09/03/09
[ 0.528370] regulator: core version 0.5
[ 0.528370] NET: Registered protocol family 16
[ 0.528370] EISA bus registered
[ 0.528370] ACPI: bus type pci registered
[ 0.528553] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
[ 0.528557] PCI: MCFG area at f0000000 reserved in E820
[ 0.528560] PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.528563] PCI: Using MMCONFIG for extended config space
[ 0.528565] PCI: Using configuration type 1 for base access
[ 0.533232] ACPI: EC: EC description table is found, configuring boot EC
[ 0.533399] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.538071] ACPI: BIOS _OSI(Linux) query ignored
[ 0.538959] ACPI: Interpreter enabled
[ 0.538964] ACPI: (supports S0 S3 S4 S5)
[ 0.538986] ACPI: Using IOAPIC for interrupt routing
[ 0.564445] ACPI: EC: GPE = 0x3f, I/O: command/status = 0x66, data = 0x62
[ 0.564448] ACPI: EC: driver started in interrupt mode
[ 0.568245] ACPI: No dock devices found.
[ 0.568262] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.568504] pci 0000:00:03.0: reg 10 io port: [0x4000-0x40ff]
[ 0.568613] pci 0000:00:03.2: reg 10 io port: [0x4180-0x41bf]
[ 0.568629] pci 0000:00:03.2: reg 20 io port: [0x4140-0x417f]
[ 0.568635] pci 0000:00:03.2: reg 24 io port: [0x4100-0x413f]
[ 0.568650] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.568656] pci 0000:00:03.2: PME# disabled
[ 0.568826] pci 0000:00:03.5: reg 10 32bit mmio: [0xdf500000-0xdf57ffff]
[ 0.568919] pci 0000:00:04.0: reg 10 32bit mmio: [0xdf588000-0xdf588fff]
[ 0.568948] pci 0000:00:04.0: supports D1 D2
[ 0.568950] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.568955] pci 0000:00:04.0: PME# disabled
[ 0.568987] pci 0000:00:04.1: reg 10 32bit mmio: [0xdf589200-0xdf5892ff]
[ 0.569018] pci 0000:00:04.1: supports D1 D2
[ 0.569020] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.569025] pci 0000:00:04.1: PME# disabled
[ 0.569061] pci 0000:00:06.0: reg 10 32bit mmio: [0xdf587000-0xdf587fff]
[ 0.569090] pci 0000:00:06.0: supports D1 D2
[ 0.569092] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.569096] pci 0000:00:06.0: PME# disabled
[ 0.569128] pci 0000:00:06.1: reg 10 32bit mmio: [0xdf589100-0xdf5891ff]
[ 0.569160] pci 0000:00:06.1: supports D1 D2
[ 0.569162] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.569166] pci 0000:00:06.1: PME# disabled
[ 0.569203] pci 0000:00:08.0: reg 10 32bit mmio: [0xdf580000-0xdf583fff]
[ 0.569232] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.569236] pci 0000:00:08.0: PME# disabled
[ 0.569298] pci 0000:00:0a.0: reg 10 32bit mmio: [0xdf586000-0xdf586fff]
[ 0.569304] pci 0000:00:0a.0: reg 14 io port: [0x41e0-0x41e7]
[ 0.569309] pci 0000:00:0a.0: reg 18 32bit mmio: [0xdf589000-0xdf5890ff]
[ 0.569315] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xdf589300-0xdf58930f]
[ 0.569333] pci 0000:00:0a.0: supports D1 D2
[ 0.569335] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.569340] pci 0000:00:0a.0: PME# disabled
[ 0.569373] pci 0000:00:0b.0: reg 10 io port: [0x41d8-0x41df]
[ 0.569379] pci 0000:00:0b.0: reg 14 io port: [0x41ec-0x41ef]
[ 0.569384] pci 0000:00:0b.0: reg 18 io port: [0x41d0-0x41d7]
[ 0.569390] pci 0000:00:0b.0: reg 1c io port: [0x41e8-0x41eb]
[ 0.569395] pci 0000:00:0b.0: reg 20 io port: [0x41c0-0x41cf]
[ 0.569401] pci 0000:00:0b.0: reg 24 32bit mmio: [0xdf584000-0xdf585fff]
[ 0.569554] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.569563] pci 0000:00:0c.0: PME# disabled
[ 0.569747] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.569755] pci 0000:00:15.0: PME# disabled
[ 0.569924] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.569932] pci 0000:00:16.0: PME# disabled
[ 0.570101] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.570109] pci 0000:00:17.0: PME# disabled
[ 0.570198] pci 0000:00:09.0: transparent bridge
[ 0.570203] pci 0000:00:09.0: bridge 32bit mmio: [0xdf400000-0xdf4fffff]
[ 0.570265] pci 0000:02:00.0: reg 10 32bit mmio: [0xd4000000-0xd4ffffff]
[ 0.570282] pci 0000:02:00.0: reg 14 64bit mmio: [0xb0000000-0xbfffffff]
[ 0.570301] pci 0000:02:00.0: reg 1c 64bit mmio: [0xd2000000-0xd3ffffff]
[ 0.570314] pci 0000:02:00.0: reg 24 io port: [0x3000-0x307f]
[ 0.570327] pci 0000:02:00.0: reg 30 32bit mmio: [0xd5000000-0xd507ffff]
[ 0.570411] pci 0000:00:0c.0: bridge io port: [0x3000-0x3fff]
[ 0.570420] pci 0000:00:0c.0: bridge 32bit mmio: [0xd2000000-0xd50fffff]
[ 0.570436] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xb0000000-0xbfffffff]
[ 0.570656] pci 0000:04:00.0: reg 10 64bit mmio: [0xdf300000-0xdf303fff]
[ 0.570695] pci 0000:04:00.0: supports D1 D2
[ 0.570698] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.570703] pci 0000:04:00.0: PME# disabled
[ 0.570782] pci 0000:00:15.0: bridge 32bit mmio: [0xdf300000-0xdf3fffff]
[ 0.570871] pci 0000:05:00.0: reg 10 64bit mmio: [0xdf200000-0xdf200fff]
[ 0.570913] pci 0000:05:00.0: supports D1 D2
[ 0.570915] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.570920] pci 0000:05:00.0: PME# disabled
[ 0.570996] pci 0000:00:16.0: bridge 32bit mmio: [0xdf200000-0xdf2fffff]
[ 0.571065] pci 0000:06:00.0: reg 10 64bit mmio: [0xdb100000-0xdb10ffff]
[ 0.571170] pci 0000:00:17.0: bridge io port: [0x1000-0x1fff]
[ 0.571179] pci 0000:00:17.0: bridge 32bit mmio: [0xdb100000-0xdf1fffff]
[ 0.571194] pci 0000:00:17.0: bridge 64bit mmio pref: [0xd7100000-0xdb0fffff]
[ 0.571252] bus 00 -> node 0
[ 0.571261] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.572333] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.661421] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.661794] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.662165] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.662535] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.662905] ACPI: PCI Interrupt Link [Z003] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.663279] ACPI: PCI Interrupt Link [Z004] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.663650] ACPI: PCI Interrupt Link [Z005] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.664034] ACPI: PCI Interrupt Link [Z006] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.664406] ACPI: PCI Interrupt Link [Z007] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.664777] ACPI: PCI Interrupt Link [Z008] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.665147] ACPI: PCI Interrupt Link [Z009] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.665517] ACPI: PCI Interrupt Link [Z00A] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.665887] ACPI: PCI Interrupt Link [Z00B] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.666258] ACPI: PCI Interrupt Link [Z00C] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.666628] ACPI: PCI Interrupt Link [Z00D] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.666998] ACPI: PCI Interrupt Link [Z00E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.667369] ACPI: PCI Interrupt Link [Z00F] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.667738] ACPI: PCI Interrupt Link [Z00G] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.668123] ACPI: PCI Interrupt Link [Z00H] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.668495] ACPI: PCI Interrupt Link [Z00I] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.668866] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *7
[ 0.669237] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.669607] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.669978] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.670348] ACPI: PCI Interrupt Link [Z00N] (IRQs 16 17 18 19 20 21 22 23) *5
[ 0.670719] ACPI: PCI Interrupt Link [Z00O] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.671090] ACPI: PCI Interrupt Link [Z00P] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.671461] ACPI: PCI Interrupt Link [Z00Q] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.671831] ACPI: PCI Interrupt Link [Z00R] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.672217] ACPI: PCI Interrupt Link [Z00S] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.672587] ACPI: PCI Interrupt Link [Z00T] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.672958] ACPI: PCI Interrupt Link [Z00U] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.673328] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15
[ 0.673696] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.674063] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.674435] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *14
[ 0.674803] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15
[ 0.675176] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.675546] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.675917] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.676304] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.676674] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7
[ 0.677047] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5
[ 0.677420] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14
[ 0.677721] ACPI: WMI: Mapper loaded
[ 0.677761] SCSI subsystem initialized
[ 0.677761] libata version 3.00 loaded.
[ 0.677761] usbcore: registered new interface driver usbfs
[ 0.677761] usbcore: registered new interface driver hub
[ 0.677761] usbcore: registered new device driver usb
[ 0.677761] PCI: Using ACPI for IRQ routing
[ 0.684010] Bluetooth: Core ver 2.13
[ 0.684024] NET: Registered protocol family 31
[ 0.684024] Bluetooth: HCI device and connection manager initialized
[ 0.684024] Bluetooth: HCI socket layer initialized
[ 0.684024] NET: Registered protocol family 8
[ 0.684026] NET: Registered protocol family 20
[ 0.684038] NetLabel: Initializing
[ 0.684040] NetLabel: domain hash size = 128
[ 0.684042] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.684056] NetLabel: unlabeled traffic allowed by default
[ 0.684076] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.684082] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.688062] AppArmor: AppArmor Filesystem Enabled
[ 0.692010] Switched to high resolution mode on CPU 0
[ 0.693352] Switched to high resolution mode on CPU 1
[ 0.696005] pnp: PnP ACPI init
[ 0.696014] ACPI: bus type pnp registered
[ 0.708954] pnp: PnP ACPI: found 9 devices
[ 0.708957] ACPI: ACPI bus type pnp unregistered
[ 0.708960] PnPBIOS: Disabled by ACPI PNP
[ 0.708972] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.708981] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.708988] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.708991] system 00:06: ioport range 0x480-0x4ff has been reserved
[ 0.708994] system 00:06: ioport range 0x500-0x57f has been reserved
[ 0.708997] system 00:06: ioport range 0x580-0x5ff has been reserved
[ 0.709000] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.709003] system 00:06: ioport range 0x880-0x8ff has been reserved
[ 0.709006] system 00:06: ioport range 0x4140-0x417f has been reserved
[ 0.709009] system 00:06: ioport range 0x4100-0x413f has been reserved
[ 0.709013] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.709016] system 00:06: ioport range 0x295-0x296 has been reserved
[ 0.743757] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.743760] pci 0000:00:09.0: IO window: disabled
[ 0.743765] pci 0000:00:09.0: MEM window: 0xdf400000-0xdf4fffff
[ 0.743769] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.743775] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02
[ 0.743781] pci 0000:00:0c.0: IO window: 0x3000-0x3fff
[ 0.743792] pci 0000:00:0c.0: MEM window: 0xd2000000-0xd50fffff
[ 0.743801] pci 0000:00:0c.0: PREFETCH window: 0x000000b0000000-0x000000bfffffff
[ 0.743815] pci 0000:00:15.0: PCI bridge, secondary bus 0000:04
[ 0.743817] pci 0000:00:15.0: IO window: disabled
[ 0.743828] pci 0000:00:15.0: MEM window: 0xdf300000-0xdf3fffff
[ 0.743836] pci 0000:00:15.0: PREFETCH window: disabled
[ 0.743850] pci 0000:00:16.0: PCI bridge, secondary bus 0000:05
[ 0.743852] pci 0000:00:16.0: IO window: disabled
[ 0.743863] pci 0000:00:16.0: MEM window: 0xdf200000-0xdf2fffff
[ 0.743871] pci 0000:00:16.0: PREFETCH window: disabled
[ 0.743885] pci 0000:00:17.0: PCI bridge, secondary bus 0000:06
[ 0.743891] pci 0000:00:17.0: IO window: 0x1000-0x1fff
[ 0.743902] pci 0000:00:17.0: MEM window: 0xdb100000-0xdf1fffff
[ 0.743910] pci 0000:00:17.0: PREFETCH window: 0x000000d7100000-0x000000db0fffff
[ 0.743927] pci 0000:00:09.0: enabling device (0000 -> 0002)
[ 0.743934] pci 0000:00:09.0: setting latency timer to 64
[ 0.744478] ACPI: PCI Interrupt Link [Z003] enabled at IRQ 23
[ 0.744485] pci 0000:00:0c.0: PCI INT A -> Link[Z003] -> GSI 23 (level, low) -> IRQ 23
[ 0.744494] pci 0000:00:0c.0: setting latency timer to 64
[ 0.745008] ACPI: PCI Interrupt Link [Z00F] enabled at IRQ 22
[ 0.745014] pci 0000:00:15.0: PCI INT A -> Link[Z00F] -> GSI 22 (level, low) -> IRQ 22
[ 0.745023] pci 0000:00:15.0: setting latency timer to 64
[ 0.745536] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 21
[ 0.745541] pci 0000:00:16.0: PCI INT A -> Link[Z00J] -> GSI 21 (level, low) -> IRQ 21
[ 0.745550] pci 0000:00:16.0: setting latency timer to 64
[ 0.746064] ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 20
[ 0.746070] pci 0000:00:17.0: PCI INT A -> Link[Z00N] -> GSI 20 (level, low) -> IRQ 20
[ 0.746079] pci 0000:00:17.0: setting latency timer to 64
[ 0.746085] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.746088] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.746090] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.746093] bus: 01 index 1 mmio: [0xdf400000-0xdf4fffff]
[ 0.746095] bus: 01 index 2 mmio: [0x0-0x0]
[ 0.746097] bus: 01 index 3 io port: [0x00-0xffff]
[ 0.746100] bus: 01 index 4 mmio: [0x000000-0xffffffff]
[ 0.746102] bus: 02 index 0 io port: [0x3000-0x3fff]
[ 0.746105] bus: 02 index 1 mmio: [0xd2000000-0xd50fffff]
[ 0.746107] bus: 02 index 2 mmio: [0xb0000000-0xbfffffff]
[ 0.746110] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.746112] bus: 04 index 0 mmio: [0x0-0x0]
[ 0.746114] bus: 04 index 1 mmio: [0xdf300000-0xdf3fffff]
[ 0.746117] bus: 04 index 2 mmio: [0x0-0x0]
[ 0.746119] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.746121] bus: 05 index 0 mmio: [0x0-0x0]
[ 0.746123] bus: 05 index 1 mmio: [0xdf200000-0xdf2fffff]
[ 0.746125] bus: 05 index 2 mmio: [0x0-0x0]
[ 0.746127] bus: 05 index 3 mmio: [0x0-0x0]
[ 0.746130] bus: 06 index 0 io port: [0x1000-0x1fff]
[ 0.746132] bus: 06 index 1 mmio: [0xdb100000-0xdf1fffff]
[ 0.746135] bus: 06 index 2 mmio: [0xd7100000-0xdb0fffff]
[ 0.746137] bus: 06 index 3 mmio: [0x0-0x0]
[ 0.746145] NET: Registered protocol family 2
[ 0.760057] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.760312] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.760629] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.760793] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.760795] TCP reno registered
[ 0.764064] NET: Registered protocol family 1
[ 0.764187] checking if image is initramfs... it is
[ 1.518476] Freeing initrd memory: 7367k freed
[ 1.518693] cpufreq: No nForce2 chipset.
[ 1.518850] audit: initializing netlink socket (disabled)
[ 1.518874] type=2000 audit(1251951711.516:1): initialized
[ 1.528039] highmem bounce pool size: 64 pages
[ 1.528044] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.529605] VFS: Disk quotas dquot_6.5.1
[ 1.529673] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.530370] fuse init (API version 7.10)
[ 1.530467] msgmni has been set to 1679
[ 1.530655] alg: No test for stdrng (krng)
[ 1.530668] io scheduler noop registered
[ 1.530671] io scheduler anticipatory registered
[ 1.530673] io scheduler deadline registered
[ 1.530689] io scheduler cfq registered (default)
[ 1.544281] pci 0000:02:00.0: Boot video device
[ 1.565094] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.565259] pcieport-driver 0000:00:0c.0: found MSI capability
[ 1.565351] pcieport-driver 0000:00:0c.0: irq 2303 for MSI/MSI-X
[ 1.565388] pci_express 0000:00:0c.0:pcie00: allocate port service
[ 1.565569] pcieport-driver 0000:00:15.0: setting latency timer to 64
[ 1.565731] pcieport-driver 0000:00:15.0: found MSI capability
[ 1.565819] pcieport-driver 0000:00:15.0: irq 2302 for MSI/MSI-X
[ 1.565856] pci_express 0000:00:15.0:pcie00: allocate port service
[ 1.566035] pcieport-driver 0000:00:16.0: setting latency timer to 64
[ 1.566197] pcieport-driver 0000:00:16.0: found MSI capability
[ 1.566285] pcieport-driver 0000:00:16.0: irq 2301 for MSI/MSI-X
[ 1.566322] pci_express 0000:00:16.0:pcie00: allocate port service
[ 1.566499] pcieport-driver 0000:00:17.0: setting latency timer to 64
[ 1.566661] pcieport-driver 0000:00:17.0: found MSI capability
[ 1.566749] pcieport-driver 0000:00:17.0: irq 2300 for MSI/MSI-X
[ 1.566786] pci_express 0000:00:17.0:pcie00: allocate port service
[ 1.566944] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.566955] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.567110] ACPI: AC Adapter [ADP1] (on-line)
[ 1.717618] ACPI: Battery Slot [BAT0] (battery present)
[ 1.717696] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.717700] ACPI: Power Button (FF) [PWRF]
[ 1.717753] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.717839] ACPI: Lid Switch [LID0]
[ 1.717888] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.717891] ACPI: Power Button (CM) [PWRB]
[ 1.717939] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.717942] ACPI: Sleep Button (CM) [SLPB]
[ 1.718841] ACPI: SSDT AFEC9C18, 027A (r1 APPLE Cpu0Ist 3000 INTL 20061109)
[ 1.719351] ACPI: SSDT AFEC9918, 02AD (r1 APPLE Cpu0Cst 3001 INTL 20061109)
[ 1.719951] Monitor-Mwait will be used to enter C-1 state
[ 1.719955] Monitor-Mwait will be used to enter C-2 state
[ 1.719958] Monitor-Mwait will be used to enter C-3 state
[ 1.719974] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.720014] processor ACPI_CPU:00: registered as cooling_device0
[ 1.720019] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.720405] ACPI: SSDT AFEC9F18, 00C8 (r1 APPLE Cpu1Ist 3000 INTL 20061109)
[ 1.720889] ACPI: SSDT AFEC8F18, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20061109)
[ 1.721640] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.721662] processor ACPI_CPU:01: registered as cooling_device1
[ 1.721667] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.745197] isapnp: Scanning for PnP cards...
[ 2.099583] isapnp: No Plug & Play device found
[ 2.109515] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.110635] brd: module loaded
[ 2.110994] loop: module loaded
[ 2.111064] Fixed MDIO Bus: probed
[ 2.111070] PPP generic driver version 2.4.2
[ 2.111130] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 2.111165] Driver 'sd' needs updating - please use bus_type methods
[ 2.111176] Driver 'sr' needs updating - please use bus_type methods
[ 2.111220] ahci 0000:00:0b.0: version 3.0
[ 2.111745] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 19
[ 2.111753] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 19 (level, low) -> IRQ 19
[ 2.111794] ahci 0000:00:0b.0: irq 2299 for MSI/MSI-X
[ 2.111865] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl IDE mode
[ 2.111869] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pmp pio slum part
[ 2.111873] ahci 0000:00:0b.0: setting latency timer to 64
[ 2.112163] scsi0 : ahci
[ 2.112305] scsi1 : ahci
[ 2.112551] scsi2 : ahci
[ 2.112673] scsi3 : ahci
[ 2.112844] scsi4 : ahci
[ 2.112969] scsi5 : ahci
[ 2.113149] ata1: SATA max UDMA/133 abar m8192@0xdf584000 port 0xdf584100 irq 2299
[ 2.113152] ata2: SATA max UDMA/133 abar m8192@0xdf584000 port 0xdf584180 irq 2299
[ 2.113155] ata3: DUMMY
[ 2.113157] ata4: DUMMY
[ 2.113158] ata5: DUMMY
[ 2.113160] ata6: DUMMY
[ 2.596016] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.596903] ata1.00: ATA-8: Hitachi HTS543232L9SA02, FB4AC52F, max UDMA/133
[ 2.596906] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.598009] ata1.00: configured for UDMA/133
[ 3.500012] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.502282] ata2.00: ATAPI: MATSHITADVD-R UJ-868, KA19, max UDMA/66, ATAPI AN
[ 3.504600] ata2.00: configured for UDMA/66
[ 3.520161] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 FB4A PQ: 0 ANSI: 5
[ 3.520262] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 3.520281] sd 0:0:0:0: [sda] Write Protect is off
[ 3.520284] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.520312] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.520372] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 3.520389] sd 0:0:0:0: [sda] Write Protect is off
[ 3.520392] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.520420] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.520424] sda: sda1 sda2 sda3 sda4
[ 3.565660] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.565705] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.567258] scsi 1:0:0:0: CD-ROM MATSHITA DVD-R UJ-868 KA19 PQ: 0 ANSI: 5
[ 3.570706] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 3.570710] Uniform CD-ROM driver Revision: 3.20
[ 3.570806] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.570846] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.571639] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.572185] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 18
[ 3.572191] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 18 (level, low) -> IRQ 18
[ 3.572203] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 3.572207] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 3.572273] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 3.572297] ehci_hcd 0000:00:04.1: debug port 1
[ 3.572302] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[ 3.572316] ehci_hcd 0000:00:04.1: irq 18, io mem 0xdf589200
[ 3.584010] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 3.584095] usb usb1: configuration #1 chosen from 1 choice
[ 3.584125] hub 1-0:1.0: USB hub found
[ 3.584132] hub 1-0:1.0: 7 ports detected
[ 3.584750] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 17
[ 3.584756] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 17 (level, low) -> IRQ 17
[ 3.584768] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 3.584771] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 3.584818] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 3.584841] ehci_hcd 0000:00:06.1: debug port 1
[ 3.584847] ehci_hcd 0000:00:06.1: cache line size of 32 is not supported
[ 3.584861] ehci_hcd 0000:00:06.1: irq 17, io mem 0xdf589100
[ 3.596010] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 3.596074] usb usb2: configuration #1 chosen from 1 choice
[ 3.596102] hub 2-0:1.0: USB hub found
[ 3.596109] hub 2-0:1.0: 5 ports detected
[ 3.596216] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.596740] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 16
[ 3.596746] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 16 (level, low) -> IRQ 16
[ 3.596758] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 3.596761] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 3.596811] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 3.596831] ohci_hcd 0000:00:04.0: irq 16, io mem 0xdf588000
[ 3.654054] usb usb3: configuration #1 chosen from 1 choice
[ 3.654083] hub 3-0:1.0: USB hub found
[ 3.654091] hub 3-0:1.0: 7 ports detected
[ 3.654701] ACPI: PCI Interrupt Link [Z000] enabled at IRQ 23
[ 3.654705] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 23 (level, low) -> IRQ 23
[ 3.654717] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 3.654720] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 3.654770] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 3.654790] ohci_hcd 0000:00:06.0: irq 23, io mem 0xdf587000
[ 3.710047] usb usb4: configuration #1 chosen from 1 choice
[ 3.710075] hub 4-0:1.0: USB hub found
[ 3.710084] hub 4-0:1.0: 5 ports detected
[ 3.710181] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.710260] PNP: No PS/2 controller found. Probing ports directly.
[ 3.711132] i8042.c: No controller found.
[ 3.711355] mice: PS/2 mouse device common for all mice
[ 3.711592] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.711642] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 3.711702] device-mapper: uevent: version 1.0.3
[ 3.711793] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: <email address hidden>
[ 3.711868] device-mapper: multipath: version 1.0.5 loaded
[ 3.711871] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.711952] EISA: Probing bus 0 at eisa.0
[ 3.711958] Cannot allocate resource for EISA slot 1
[ 3.711963] Cannot allocate resource for EISA slot 3
[ 3.711966] Cannot allocate resource for EISA slot 4
[ 3.711980] EISA: Detected 0 cards.
[ 3.712112] cpuidle: using governor ladder
[ 3.712247] cpuidle: using governor menu
[ 3.712815] TCP cubic registered
[ 3.712926] NET: Registered protocol family 10
[ 3.713397] lo: Disabled Privacy Extensions
[ 3.713778] NET: Registered protocol family 17
[ 3.713797] Bluetooth: L2CAP ver 2.11
[ 3.713799] Bluetooth: L2CAP socket layer initialized
[ 3.713802] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.713804] Bluetooth: SCO socket layer initialized
[ 3.713841] Bluetooth: RFCOMM socket layer initialized
[ 3.713847] Bluetooth: RFCOMM TTY layer initialized
[ 3.713849] Bluetooth: RFCOMM ver 1.10
[ 3.713854] Marking TSC unstable due to TSC halts in idle
[ 3.714711] Using IPI No-Shortcut mode
[ 3.714756] registered taskstats version 1
[ 3.714833] Magic number: 9:486:362
[ 3.714932] rtc_cmos 00:07: setting system clock to 2009-09-03 04:21:54 UTC (1251951714)
[ 3.714935] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.714936] EDD information not available.
[ 3.715188] Freeing unused kernel memory: 532k freed
[ 3.715308] Write protecting the kernel text: 4116k
[ 3.715357] Write protecting the kernel read-only data: 1528k
[ 3.913014] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 3.933732] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 3.934088] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 3.934092] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[ 3.934098] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 3.982881] ohci1394 0000:05:00.0: PCI INT A -> Link[Z00J] -> GSI 21 (level, low) -> IRQ 21
[ 3.982886] ohci1394 0000:05:00.0: setting latency timer to 64
[ 4.032708] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[df200000-df2007ff] Max Packet=[4096] IR/IT contexts=[8/8]
[ 4.039342] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:25:4b:bb:e7:6c
[ 4.039345] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 4.052869] usb 1-4: configuration #1 chosen from 1 choice
[ 4.419967] PM: Starting manual resume from disk
[ 4.419969] PM: Resume from partition 8:4
[ 4.419970] PM: Checking hibernation image.
[ 4.420257] PM: Resume from disk failed.
[ 4.447385] kjournald starting. Commit interval 5 seconds
[ 4.447392] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.896039] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 5.122092] usb 4-1: configuration #1 chosen from 1 choice
[ 5.125058] hub 4-1:1.0: USB hub found
[ 5.128040] hub 4-1:1.0: 3 ports detected
[ 5.312146] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00254bfffebbe76c]
[ 5.444121] usb 4-4: new full speed USB device using ohci_hcd and address 3
[ 5.500114] Clocksource tsc unstable (delta = -252970893 ns)
[ 5.668178] usb 4-4: configuration #1 chosen from 1 choice
[ 5.972121] usb 3-5: new low speed USB device using ohci_hcd and address 2
[ 6.172138] usb 3-5: configuration #1 chosen from 1 choice
[ 6.480114] usb 3-6: new full speed USB device using ohci_hcd and address 3
[ 6.704166] usb 3-6: configuration #1 chosen from 1 choice
[ 6.798118] usb 4-1.1: new full speed USB device using ohci_hcd and address 4
[ 6.921169] usb 4-1.1: configuration #1 chosen from 1 choice
[ 7.002118] usb 4-1.2: new full speed USB device using ohci_hcd and address 5
[ 7.113114] usb 4-1.2: configuration #1 chosen from 1 choice
[ 7.194118] usb 4-1.3: new full speed USB device using ohci_hcd and address 6
[ 7.305167] usb 4-1.3: configuration #1 chosen from 1 choice
[ 10.336641] udev: starting version 141
[ 10.642066] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 10.642162] usbcore: registered new interface driver btusb
[ 10.684676] usbcore: registered new interface driver hiddev
[ 10.690356] input: Microsoft Microsoft® 2.4GHz Transceiver v4.0 as /devices/pci0000:00/0000:00:06.0/usb4/4-4/4-4:1.0/input/input5
[ 10.693488] generic-usb 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v4.0] on usb-0000:00:06.0-4/input0
[ 10.702498] input: Microsoft Microsoft® 2.4GHz Transceiver v4.0 as /devices/pci0000:00/0000:00:06.0/usb4/4-4/4-4:1.1/input/input6
[ 10.705175] generic-usb 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v4.0] on usb-0000:00:06.0-4/input1
[ 10.716494] Linux agpgart interface v0.103
[ 10.735275] input: Microsoft Microsoft® 2.4GHz Transceiver v4.0 as /devices/pci0000:00/0000:00:06.0/usb4/4-4/4-4:1.2/input/input7
[ 10.736511] generic-usb 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v4.0] on usb-0000:00:06.0-4/input2
[ 10.742315] input: HID 05ac:820a as /devices/pci0000:00/0000:00:06.0/usb4/4-1/4-1.2/4-1.2:1.0/input/input8
[ 10.744170] generic-usb 0003:05AC:820A.0008: input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:06.0-1.2/input0
[ 10.749209] input: HID 05ac:820b as /devices/pci0000:00/0000:00:06.0/usb4/4-1/4-1.3/4-1.3:1.0/input/input9
[ 10.754227] generic-usb 0003:05AC:820B.0009: input,hidraw4: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:06.0-1.3/input0
[ 10.754241] usbcore: registered new interface driver usbhid
[ 10.754258] usbhid: v2.6:USB HID core driver
[ 10.781113] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 10.788385] ieee80211_crypt: registered algorithm 'NULL'
[ 10.790166] wl: module license 'MIXED/Proprietary' taints kernel.
[ 10.791673] wl 0000:04:00.0: power state changed by ACPI to D0
[ 10.791857] wl 0000:04:00.0: PCI INT A -> Link[Z00F] -> GSI 22 (level, low) -> IRQ 22
[ 10.791862] wl 0000:04:00.0: setting latency timer to 64
[ 10.880146] cfg80211: Calling CRDA to update world regulatory domain
[ 11.147403] cfg80211: World regulatory domain updated:
[ 11.147406] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.147408] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.147409] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.147411] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.147412] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.147414] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.169712] usbcore: registered new interface driver appleir
[ 12.169740] appleir: v1.1:USB Apple MacMini IR Receiver driver
[ 12.194130] apple 0003:05AC:8242.0004: hiddev97,hidraw5: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:04.0-5/input0
[ 12.200411] input: Apple, Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-6/3-6:1.0/input/input11
[ 12.204713] Linux video capture interface: v2.00
[ 12.247533] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8507)
[ 12.248692] input: Built-in iSight as /devices/pci0000:00/0000:00:04.1/usb1/1-4/1-4:1.0/input/input12
[ 12.289499] ieee80211_crypt: registered algorithm 'TKIP'
[ 12.301211] eth1: Broadcom BCM432b 802.11 Wireless Controller 5.10.91.9
[ 12.396373] nvidia 0000:02:00.0: power state changed by ACPI to D0
[ 12.396388] nvidia 0000:02:00.0: PCI INT A -> Link[Z003] -> GSI 23 (level, low) -> IRQ 23
[ 12.396400] nvidia 0000:02:00.0: setting latency timer to 64
[ 12.396683] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 12.401242] apple 0003:05AC:0236.0005: input,hidraw6: USB HID v1.11 Keyboard [Apple, Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6/input0
[ 12.409105] usbcore: registered new interface driver uvcvideo
[ 12.409108] USB Video Class driver (v0.1.0)
[ 12.410053] apple 0003:05AC:0236.0006: hidraw7: USB HID v1.11 Device [Apple, Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6/input1
[ 12.417350] input: Apple, Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-6/3-6:1.2/input/input13
[ 12.418725] apple 0003:05AC:0236.0007: input,hidraw8: USB HID v1.11 Mouse [Apple, Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6/input2
[ 12.426411] ath5k_pci 0000:06:00.0: PCI INT A -> GSI 0 (level, low) -> IRQ 0
[ 12.426419] ath5k_pci 0000:06:00.0: setting latency timer to 64
[ 12.426461] ath5k_pci 0000:06:00.0: registered as 'phy0'
[ 12.426463] ath5k phy0: request_irq failed
[ 12.426472] ath5k_pci 0000:06:00.0: PCI INT A disabled
[ 12.426476] ath5k_pci: probe of 0000:06:00.0 failed with error -16
[ 12.629492] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 12.629501] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 12.629669] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 13.424956] lp: driver loaded but no devices found
[ 13.485333] applesmc: Apple MacBook Pro 5 detected:
[ 13.485340] applesmc: - Model with accelerometer
[ 13.485341] applesmc: - Model with light sensors and backlight
[ 13.485348] applesmc: - Model with 20 temperature sensors
[ 13.540726] applesmc: device successfully initialized (0xe0, 0x00).
[ 13.540733] applesmc: device successfully initialized.
[ 13.541491] applesmc: 2 fans found.
[ 13.543709] input: applesmc as /devices/platform/applesmc.768/input/input14
[ 13.553926] Registered led device: smc::kbd_backlight
[ 13.553946] applesmc: driver successfully loaded.
[ 13.635878] Adding 1389208k swap on /dev/sda4. Priority:-1 extents:1 across:1389208k
[ 14.177589] EXT3 FS on sda3, internal journal
[ 15.409255] type=1505 audit(1251951726.194:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2307
[ 15.442026] type=1505 audit(1251951726.226:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2311
[ 15.442081] type=1505 audit(1251951726.226:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2311
[ 15.442111] type=1505 audit(1251951726.226:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2311
[ 15.442139] type=1505 audit(1251951726.226:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2311
[ 15.532714] type=1505 audit(1251951726.314:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2316
[ 15.532805] type=1505 audit(1251951726.314:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2316
[ 15.553058] type=1505 audit(1251951726.338:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2320
[ 19.390294] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.390297] Bluetooth: BNEP filters: protocol multicast
[ 19.414676] input: Mouseemu virtual keyboard as /devices/virtual/input/input15
[ 19.420171] Bridge firewalling registered
[ 19.613513] input: Mouseemu virtual mouse as /devices/virtual/input/input16
[ 21.018892] ppdev: user-space parallel port driver
[ 25.216496] forcedeth 0000:00:0a.0: irq 2298 for MSI/MSI-X
[ 25.216806] eth0: no link during initialization.
[ 25.217363] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.000011] eth1: no IPv6 routers present

Revision history for this message
Launchpad Janitor (janitor) said : 		#4

This question was expired because it remained in the 'Open' state without activity for the last 15 days.