9.04 Speedstep not working, P III laptop overheating

Hi,

I have an old laptop here (Twinhead Pentium III 1133Mhz) which regularly overheats on Jaunty/9.04. While looking into the issue, it turns out that CPU throttling is not working. I realize that this in itself should not cause overheating, but it sure doesn't help things...

I compiled a kernel without the CPU frequency setting modules, making them externally loadable .ko modules. When trying to load the modules using modprobe, none of them will load.
'modprobe acpi-cpufreq' yields 'No such device', as do the older deprecated speedstep-<x> modules.

There's nothing in the Kernel ring buffer (dmesg) other than a reassuring "ACPI: Processor [CPU0] (supports 8 throttling states)", no errors. I did spot "weird, boot CPU (#0) not listedby the BIOS", but that shouldn't really impact things, should it?

I'm really lost! Anyone have any ideas?

Thanks!

Ivo

$ uname -a
Linux stray 2.6.28-13-generic #45-Ubuntu SMP Tue Jun 30 19:49:51 UTC 2009 i686 GNU/Linux

$cat /proc/ioports | grep CPU
1010-1015 : ACPI CPU throttle

$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 11
model name : Intel(R) Pentium(R) III CPU 1133MHz
stepping : 1
cpu MHz : 1133.437
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 2266.87
clflush size : 32
power management:

$ cat /proc/acpi/processor/CPU0/throttling
state count: 8
active state: T1
state available: T0 to T7
states:
T0: 100%
*T1: 87%
T2: 75%
T3: 62%
T4: 50%
T5: 37%
T6: 25%
T7: 12%

$ lsmod
Module Size Used by
binfmt_misc 8200 1
input_polldev 3976 0
video 17040 0
output 3072 1 video
lp 9124 0
arc4 2048 2
ecb 2944 2
ath5k 98176 0
snd_ali5451 17804 3
mac80211 203256 1 ath5k
snd_ac97_codec 103844 1 snd_ali5451
joydev 9792 0
led_class 4228 1 ath5k
ac97_bus 1920 1 snd_ac97_codec
cfg80211 29968 2 ath5k,mac80211
snd_pcm_oss 37760 0
snd_mixer_oss 14592 1 snd_pcm_oss
snd_pcm 71304 3 snd_ali5451,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 2948 0
snd_seq_oss 28800 0
snd_seq_midi 6400 0
snd_rawmidi 20608 1 snd_seq_midi
snd_seq_midi_event 7040 2 snd_seq_oss,snd_seq_midi
snd_seq 45296 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
pcmcia 34156 0
snd_timer 19588 2 snd_pcm,snd_seq
snd_seq_device 7180 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
ppdev 7556 0
psmouse 53396 0
parport_pc 31652 1
snd 53028 16 snd_ali5451,snd_ac97_codec,snd_pcm_oss,snd_mixer_o ss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_tim er,snd_seq_device
yenta_socket 24332 2
rsrc_nonstatic 11264 1 yenta_socket
i2c_ali15x3 6660 0
ali_agp 5760 1
pcspkr 2560 0
serio_raw 5380 0
parport 33224 3 lp,ppdev,parport_pc
snd_page_alloc 8968 1 snd_pcm
pcmcia_core 35088 3 pcmcia,yenta_socket,rsrc_nonstatic
i2c_ali1535 6148 0
agpgart 33584 1 ali_agp
shpchp 32276 0
ohci1394 29616 0
ieee1394 83900 1 ohci1394
floppy 53220 0

$ lspci -v
00:00.0 Host bridge: ALi Corporation M1644/M1644T Northbridge+Trident (rev 01)
Subsystem: Device 168f:0002
Flags: bus master, medium devsel, latency 0
Memory at f0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-ali
Kernel modules: ali-agp

00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller
Flags: bus master, slow devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: ea100000-efffffff
Prefetchable memory behind bridge: 28000000-280fffff
Kernel modules: shpchp

00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10)
Subsystem: Device 168f:0002
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at ea000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd

00:03.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller
Subsystem: Device 168f:0002
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 28100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 24000000-27fff000
I/O window 0: 00001400-000014ff
I/O window 1: 00001800-000018ff
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket

00:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AA22 IEEE-1394 Controller (PHY/Link Integrated) (rev 02) (prog-if 10)
Subsystem: Device 168f:0002
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at ea001000 (32-bit, non-prefetchable) [size=2K]
Memory at ea004000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394

00:06.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
Subsystem: Device 168f:0002
Flags: medium devsel
Capabilities: <access denied>
Kernel driver in use: ali1535_smbus
Kernel modules: alim7101_wdt, i2c-ali15x3, i2c-ali1535

00:07.0 ISA bridge: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+]
Subsystem: Device 168f:0002
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel modules: alim7101_wdt, alim1535_wdt

00:08.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 01)
Subsystem: Device 168f:0002
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at 2000 [size=256]
Memory at ea002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ALI 5451
Kernel modules: snd-ali5451

00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev c3) (prog-if fa)
Subsystem: Device 168f:0002
Flags: bus master, medium devsel, latency 64, IRQ 255
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 1000 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_ali

01:00.0 VGA compatible controller: Trident Microsystems CyberBlade XPAi1 (rev 82)
Subsystem: Device 168f:0002
Flags: 66MHz, medium devsel, IRQ 9
Memory at ee000000 (32-bit, non-prefetchable) [size=32M]
Memory at ea400000 (32-bit, non-prefetchable) [size=4M]
Memory at ec000000 (32-bit, non-prefetchable) [size=32M]
Memory at ea100000 (32-bit, non-prefetchable) [size=32K]
[virtual] Expansion ROM at 28000000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel modules: tridentfb

02:00.0 Ethernet controller: Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01)
Subsystem: D-Link System Inc Device 3a12
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 24000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath5k_pci
Kernel modules: ath5k

$ dmesg
[ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-13-generic (buildd@vernadsky) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #45-Ubuntu SMP Tue Jun 30 19:49:51 UTC 2009 (Ubuntu 2.6.28-13.45-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000015ef0000 (usable)
[ 0.000000] BIOS-e820: 0000000015ef0000 - 0000000015eff000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000015eff000 - 0000000015f00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000015f00000 - 0000000016000000 (usable)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x16000 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] modified: 00000000000ec000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000015ef0000 (usable)
[ 0.000000] modified: 0000000015ef0000 - 0000000015eff000 (ACPI data)
[ 0.000000] modified: 0000000015eff000 - 0000000015f00000 (ACPI NVS)
[ 0.000000] modified: 0000000015f00000 - 0000000016000000 (usable)
[ 0.000000] modified: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 16000000 @ 10000-15000
[ 0.000000] RAMDISK: 157aa000 - 15edfacf
[ 0.000000] ACPI: RSDP 000F7150, 0014 (r0 KDSi )
[ 0.000000] ACPI: RSDT 15EFB9E2, 002C (r1 KDSi SUMOPLUS 1 PTL 0)
[ 0.000000] ACPI: FACP 15EFEF64, 0074 (r1 KDSi SUMOPLUS 1 PTL F4240)
[ 0.000000] ACPI: DSDT 15EFBA0E, 3556 (r1 KDSi SUMOPLUS 1 MSFT 100000D)
[ 0.000000] ACPI: FACS 15EFFFC0, 0040
[ 0.000000] ACPI: BOOT 15EFEFD8, 0028 (r1 PTLTD $SBFTBL$ 1 LTP 1)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 352MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 16000000
[ 0.000000] low ram: 00000000 - 16000000
[ 0.000000] bootmap 00011000 - 00013c00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0016000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008760ac] TEXT DATA BSS ==> [0000100000 - 00008760ac]
[ 0.000000] #4 [00157aa000 - 0015edfacf] RAMDISK ==> [00157aa000 - 0015edfacf]
[ 0.000000] #5 [0000877000 - 000087b000] INIT_PG_TABLE ==> [0000877000 - 000087b000]
[ 0.000000] #6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000014000] BOOTMAP ==> [0000011000 - 0000014000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00016000
[ 0.000000] HighMem 0x00016000 -> 0x00016000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00015ef0
[ 0.000000] 0: 0x00015f00 -> 0x00016000
[ 0.000000] On node 0 totalpages: 89983
[ 0.000000] free_area_init_node: node 0, pgdat c06c9500, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 672 pages used for memmap
[ 0.000000] Normal zone: 85328 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- reenabling.
[ 0.000000] Found and enabled local APIC!
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000ec000
[ 0.000000] PM: Registered nosave memory: 00000000000ec000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000015ef0000 - 0000000015eff000
[ 0.000000] PM: Registered nosave memory: 0000000015eff000 - 0000000015f00000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 16000000:e9fc0000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 89279
[ 0.000000] Kernel command line: root=UUID=6aeecd37-1df7-40f0-a8cd-c7cc7a7c845d ro quiet splash lapic
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1133.319 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] allocated 1801920 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 339512k/360448k available (4110k kernel code, 20100k reserved, 2196k data, 532k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xd6800000 - 0xff3fe000 ( 651 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xd6000000 ( 352 MB)
[ 0.004000] .init : 0xc0731000 - 0xc07b6000 ( 532 kB)
[ 0.004000] .data : 0xc0503b9f - 0xc0728e60 (2196 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0503b9f (4110 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004034] Calibrating delay loop (skipped), value calculated using timer frequency.. 2266.63 BogoMIPS (lpj=4533276)
[ 0.004098] Security Framework initialized
[ 0.004134] SELinux: Disabled at boot.
[ 0.004201] AppArmor: AppArmor initialized
[ 0.004229] Mount-cache hash table entries: 512
[ 0.004636] Initializing cgroup subsys ns
[ 0.004646] Initializing cgroup subsys cpuacct
[ 0.004652] Initializing cgroup subsys memory
[ 0.004661] Initializing cgroup subsys freezer
[ 0.004698] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.004704] CPU: L2 cache: 256K
[ 0.004740] Checking 'hlt' instruction... OK.
[ 0.021568] SMP alternatives: switching to UP code
[ 0.241765] Freeing SMP alternatives: 18k freed
[ 0.241780] ACPI: Core revision 20080926
[ 0.247056] ACPI: Checking initramfs for custom DSDT
[ 0.768226] weird, boot CPU (#0) not listedby the BIOS.
[ 0.768236] SMP motherboard not detected.
[ 0.772002] SMP disabled
[ 0.772002] Brought up 1 CPUs
[ 0.772002] Total of 1 processors activated (2266.63 BogoMIPS).
[ 0.772002] CPU0 attaching NULL sched-domain.
[ 0.772002] net_namespace: 776 bytes
[ 0.772002] Booting paravirtualized kernel on bare hardware
[ 0.772002] Time: 23:48:37 Date: 07/19/09
[ 0.772002] regulator: core version 0.5
[ 0.772002] NET: Registered protocol family 16
[ 0.772002] EISA bus registered
[ 0.772002] ACPI: bus type pci registered
[ 0.811318] PCI: PCI BIOS revision 2.10 entry at 0xfd8ae, last bus=1
[ 0.811326] PCI: Using configuration type 1 for base access
[ 0.814804] ACPI: EC: Look up EC in DSDT
[ 0.854171] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1.249543] ACPI: Interpreter enabled
[ 1.249564] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.249608] ACPI: Using PIC for interrupt routing
[ 1.301221] ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
[ 1.301230] ACPI: EC: driver started in interrupt mode
[ 1.301444] ACPI: No dock devices found.
[ 1.301468] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.301574] pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf3ffffff]
[ 1.301675] pci 0000:00:02.0: reg 10 32bit mmio: [0xea000000-0xea000fff]
[ 1.301732] pci 0000:00:03.0: reg 10 32bit mmio: [0x28100000-0x28100fff]
[ 1.301744] pci 0000:00:03.0: supports D1 D2
[ 1.301750] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.301758] pci 0000:00:03.0: PME# disabled
[ 1.301789] pci 0000:00:05.0: reg 10 32bit mmio: [0xea001000-0xea0017ff]
[ 1.301799] pci 0000:00:05.0: reg 14 32bit mmio: [0xea004000-0xea007fff]
[ 1.301830] pci 0000:00:05.0: supports D2
[ 1.301834] pci 0000:00:05.0: PME# supported from D2 D3hot
[ 1.301840] pci 0000:00:05.0: PME# disabled
[ 1.301902] pci 0000:00:06.0: quirk: region 8000-803f claimed by ali7101 ACPI
[ 1.301909] pci 0000:00:06.0: quirk: region 8040-805f claimed by ali7101 SMB
[ 1.301997] pci 0000:00:08.0: reg 10 io port: [0x2000-0x20ff]
[ 1.302006] pci 0000:00:08.0: reg 14 32bit mmio: [0xea002000-0xea002fff]
[ 1.302034] pci 0000:00:08.0: supports D1 D2
[ 1.302039] pci 0000:00:08.0: PME# supported from D2 D3hot D3cold
[ 1.302045] pci 0000:00:08.0: PME# disabled
[ 1.302092] pci 0000:00:0f.0: reg 20 io port: [0x1000-0x100f]
[ 1.302162] pci 0000:01:00.0: reg 10 32bit mmio: [0xee000000-0xefffffff]
[ 1.302171] pci 0000:01:00.0: reg 14 32bit mmio: [0xea400000-0xea7fffff]
[ 1.302180] pci 0000:01:00.0: reg 18 32bit mmio: [0xec000000-0xedffffff]
[ 1.302188] pci 0000:01:00.0: reg 1c 32bit mmio: [0xea100000-0xea107fff]
[ 1.302203] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 1.302214] pci 0000:01:00.0: supports D1 D2
[ 1.302251] pci 0000:00:01.0: bridge 32bit mmio: [0xea100000-0xefffffff]
[ 1.302282] bus 00 -> node 0
[ 1.302296] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.304502] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 7 *9 10 11 12)
[ 1.304786] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 7 9 10 11 12) *0, disabled.
[ 1.305062] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 7 10 11 12) *0, disabled.
[ 1.305339] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 7 10 11 12) *0, disabled.
[ 1.305614] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 7 9 10 11 12) *0, disabled.
[ 1.305892] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 7 9 10 11 12) *0, disabled.
[ 1.306169] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 7 10 11 12) *0, disabled.
[ 1.306445] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 7 10 11 12) *0, disabled.
[ 1.306722] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 7 *10 11 12)
[ 1.306970] ACPI: WMI: Mapper loaded
[ 1.307513] SCSI subsystem initialized
[ 1.307647] libata version 3.00 loaded.
[ 1.307795] usbcore: registered new interface driver usbfs
[ 1.307844] usbcore: registered new interface driver hub
[ 1.307922] usbcore: registered new device driver usb
[ 1.308249] PCI: Using ACPI for IRQ routing
[ 1.308427] Bluetooth: Core ver 2.13
[ 1.308427] NET: Registered protocol family 31
[ 1.308427] Bluetooth: HCI device and connection manager initialized
[ 1.308427] Bluetooth: HCI socket layer initialized
[ 1.308427] NET: Registered protocol family 8
[ 1.308427] NET: Registered protocol family 20
[ 1.308427] NetLabel: Initializing
[ 1.308427] NetLabel: domain hash size = 128
[ 1.308427] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.308427] NetLabel: unlabeled traffic allowed by default
[ 1.308487] AppArmor: AppArmor Filesystem Enabled
[ 1.308527] pnp: PnP ACPI init
[ 1.308527] ACPI: bus type pnp registered
[ 1.419483] pnp: PnP ACPI: found 12 devices
[ 1.419491] ACPI: ACPI bus type pnp unregistered
[ 1.419501] PnPBIOS: Disabled by ACPI PNP
[ 1.419536] system 00:07: ioport range 0x3810-0x381f has been reserved
[ 1.419542] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 1.419549] system 00:07: ioport range 0x8000-0x805f could not be reserved
[ 1.419555] system 00:07: ioport range 0x10f0-0x116f has been reserved
[ 1.419560] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 1.419566] system 00:07: ioport range 0x480-0x48f has been reserved
[ 1.419571] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 1.419580] system 00:07: iomem range 0xfffc0000-0xffffffff has been reserved
[ 1.454577] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.454583] pci 0000:00:01.0: IO window: disabled
[ 1.454594] pci 0000:00:01.0: MEM window: 0xea100000-0xefffffff
[ 1.454601] pci 0000:00:01.0: PREFETCH window: 0x00000028000000-0x000000280fffff
[ 1.454613] pci 0000:00:03.0: CardBus bridge, secondary bus 0000:02
[ 1.454618] pci 0000:00:03.0: IO window: 0x001400-0x0014ff
[ 1.454625] pci 0000:00:03.0: IO window: 0x001800-0x0018ff
[ 1.454632] pci 0000:00:03.0: PREFETCH window: 0x20000000-0x23ffffff
[ 1.454639] pci 0000:00:03.0: MEM window: 0x24000000-0x27ffffff
[ 1.454660] pci 0000:00:01.0: setting latency timer to 64
[ 1.455092] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 1.455099] PCI: setting IRQ 11 as level-triggered
[ 1.455108] pci 0000:00:03.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 1.455121] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.455126] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 1.455130] bus: 01 index 0 mmio: [0x0-0x0]
[ 1.455135] bus: 01 index 1 mmio: [0xea100000-0xefffffff]
[ 1.455139] bus: 01 index 2 mmio: [0x28000000-0x280fffff]
[ 1.455144] bus: 01 index 3 mmio: [0x0-0x0]
[ 1.455148] bus: 02 index 0 io port: [0x1400-0x14ff]
[ 1.455153] bus: 02 index 1 io port: [0x1800-0x18ff]
[ 1.455157] bus: 02 index 2 mmio: [0x20000000-0x23ffffff]
[ 1.455162] bus: 02 index 3 mmio: [0x24000000-0x27ffffff]
[ 1.455196] NET: Registered protocol family 2
[ 1.455532] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 1.456147] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.456491] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.456941] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.456951] TCP reno registered
[ 1.457354] NET: Registered protocol family 1
[ 1.457724] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 1.964809] it is
[ 2.711489] Freeing initrd memory: 7382k freed
[ 2.711698] Simple Boot Flag at 0x36 set to 0x1
[ 2.711799] cpufreq: No nForce2 chipset.
[ 2.712594] audit: initializing netlink socket (disabled)
[ 2.712679] type=2000 audit(1248047318.712:1): initialized
[ 2.727329] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.731167] VFS: Disk quotas dquot_6.5.1
[ 2.731407] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.733698] fuse init (API version 7.10)
[ 2.733925] msgmni has been set to 678
[ 2.734478] alg: No test for stdrng (krng)
[ 2.734520] io scheduler noop registered
[ 2.734525] io scheduler anticipatory registered
[ 2.734530] io scheduler deadline registered
[ 2.734602] io scheduler cfq registered (default)
[ 2.734756] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 2.734792] pci 0000:01:00.0: Boot video device
[ 2.821623] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.821647] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.821963] ACPI: AC Adapter [ACAD] (on-line)
[ 2.822728] ACPI: Battery Slot [BAT1] (battery present)
[ 2.822887] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.822893] ACPI: Power Button (FF) [PWRF]
[ 2.822985] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 2.823090] ACPI: Lid Switch [LID]
[ 2.823194] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 2.823200] ACPI: Sleep Button (CM) [SLPB]
[ 2.823600] processor ACPI_CPU:00: registered as cooling_device0
[ 2.823609] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.868643] isapnp: Scanning for PnP cards...
[ 3.222836] isapnp: No Plug & Play device found
[ 3.225960] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 3.226179] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.226359] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.227090] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.229364] brd: module loaded
[ 3.230345] loop: module loaded
[ 3.230747] Fixed MDIO Bus: probed
[ 3.230772] PPP generic driver version 2.4.2
[ 3.230994] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 3.231197] Driver 'sd' needs updating - please use bus_type methods
[ 3.231230] Driver 'sr' needs updating - please use bus_type methods
[ 3.231973] pata_ali 0000:00:0f.0: can't derive routing for PCI INT A
[ 3.232836] scsi0 : pata_ali
[ 3.233405] scsi1 : pata_ali
[ 3.235016] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0x1000 irq 14
[ 3.235025] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0x1008 irq 15
[ 3.396336] ata1.00: ATA-5: FUJITSU MHN2200AT, 7255, max UDMA/100
[ 3.396344] ata1.00: 39070080 sectors, multi 16: LBA
[ 3.396399] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 3.412270] ata1.00: configured for UDMA/33
[ 3.688317] ata2.00: ATAPI: QSI DVD-ROM SDR-081, ETC9, max UDMA/33
[ 3.688362] ata2.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled
[ 3.688368] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[ 3.704296] ata2.00: configured for UDMA/33
[ 3.705444] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHN2200A 7255 PQ: 0 ANSI: 5
[ 3.705727] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB)
[ 3.705772] sd 0:0:0:0: [sda] Write Protect is off
[ 3.705778] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.705843] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.706027] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB)
[ 3.706063] sd 0:0:0:0: [sda] Write Protect is off
[ 3.706069] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.706130] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.706142] sda: sda1 sda2 < sda5 >
[ 3.764091] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.764311] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.765380] scsi 1:0:0:0: CD-ROM QSI DVD-ROM SDR-081 ETC9 PQ: 0 ANSI: 5
[ 3.768203] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 3.768213] Uniform CD-ROM driver Revision: 3.20
[ 3.768501] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.768656] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.769841] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.769890] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.770426] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
[ 3.770434] PCI: setting IRQ 10 as level-triggered
[ 3.770443] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKU] -> GSI 10 (level, low) -> IRQ 10
[ 3.770512] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 3.770692] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 3.770741] ohci_hcd 0000:00:02.0: irq 10, io mem 0xea000000
[ 3.826306] usb usb1: configuration #1 chosen from 1 choice
[ 3.826389] hub 1-0:1.0: USB hub found
[ 3.826436] hub 1-0:1.0: 2 ports detected
[ 3.826790] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.827185] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 3.829783] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.829806] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.830164] mice: PS/2 mouse device common for all mice
[ 3.830745] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.830802] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 3.831104] device-mapper: uevent: version 1.0.3
[ 3.831630] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: <email address hidden>
[ 3.831855] device-mapper: multipath: version 1.0.5 loaded
[ 3.831864] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.832313] EISA: Probing bus 0 at eisa.0
[ 3.832348] Cannot allocate resource for EISA slot 1
[ 3.832356] Cannot allocate resource for EISA slot 2
[ 3.832361] Cannot allocate resource for EISA slot 3
[ 3.832390] Cannot allocate resource for EISA slot 8
[ 3.832396] EISA: Detected 0 cards.
[ 3.832512] cpuidle: using governor ladder
[ 3.832520] cpuidle: using governor menu
[ 3.833974] TCP cubic registered
[ 3.834285] NET: Registered protocol family 10
[ 3.835272] lo: Disabled Privacy Extensions
[ 3.835996] NET: Registered protocol family 17
[ 3.836104] Bluetooth: L2CAP ver 2.11
[ 3.836108] Bluetooth: L2CAP socket layer initialized
[ 3.836115] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.836119] Bluetooth: SCO socket layer initialized
[ 3.836250] Bluetooth: RFCOMM socket layer initialized
[ 3.836280] Bluetooth: RFCOMM TTY layer initialized
[ 3.836285] Bluetooth: RFCOMM ver 1.10
[ 3.836425] IO APIC resources could be not be allocated.
[ 3.836494] Using IPI No-Shortcut mode
[ 3.836750] registered taskstats version 1
[ 3.836950] Magic number: 1:662:858
[ 3.837163] rtc_cmos 00:02: setting system clock to 2009-07-19 23:48:40 UTC (1248047320)
[ 3.837171] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.837175] EDD information not available.
[ 3.839154] Freeing unused kernel memory: 532k freed
[ 3.839428] Write protecting the kernel text: 4112k
[ 3.839508] Write protecting the kernel read-only data: 1524k
[ 3.876497] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 4.786840] Floppy drive(s): fd0 is 1.44M
[ 4.807491] FDC 0 is a post-1991 82077
[ 5.173060] ohci1394 0000:00:05.0: enabling device (0010 -> 0012)
[ 5.173581] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[ 5.173590] PCI: setting IRQ 9 as level-triggered
[ 5.173598] ohci1394 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 5.223753] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[ea001000-ea0017ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.582408] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00012f5b0000125c]
[ 6.670861] PM: Starting manual resume from disk
[ 6.670873] PM: Resume from partition 8:5
[ 6.670877] PM: Checking hibernation image.
[ 6.671406] PM: Resume from disk failed.
[ 6.717198] kjournald starting. Commit interval 5 seconds
[ 6.717249] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.176445] udev: starting version 141
[ 16.469305] Linux agpgart interface v0.103
[ 16.589785] agpgart-ali 0000:00:00.0: ALi M1644 chipset
[ 16.598850] agpgart-ali 0000:00:00.0: AGP aperture is 64M @ 0xf0000000
[ 16.764495] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.116288] yenta_cardbus 0000:00:03.0: CardBus bridge found [168f:0002]
[ 17.116321] yenta_cardbus 0000:00:03.0: Enabling burst memory read transactions
[ 17.116328] yenta_cardbus 0000:00:03.0: Using CSCINT to route CSC interrupts to PCI
[ 17.116333] yenta_cardbus 0000:00:03.0: Routing CardBus interrupts to PCI
[ 17.116341] yenta_cardbus 0000:00:03.0: TI: mfunc 0x01221c72, devctl 0x46
[ 17.350975] yenta_cardbus 0000:00:03.0: ISA IRQ mask 0x00b8, PCI irq 11
[ 17.350988] yenta_cardbus 0000:00:03.0: Socket status: 30000020
[ 17.546002] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 17.579798] parport_pc 00:08: reported by Plug and Play ACPI
[ 17.579894] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 17.783708] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 17.992120] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 17.992186] pci 0000:02:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[ 17.992268] yenta_cardbus 0000:00:03.0: EnE: chaning testregister 0xC9, 40 -> 40
[ 18.180670] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 18.180685] ALI 5451 0000:00:08.0: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 18.776497] Synaptics Touchpad, model: 1, fw: 4.1, id: 0x848a1, caps: 0x0/0x0
[ 18.806743] ppdev: user-space parallel port driver
[ 18.826359] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 18.982826] cfg80211: Calling CRDA to update world regulatory domain
[ 19.122879] cfg80211: World regulatory domain updated:
[ 19.122899] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.122906] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.122911] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.122917] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.122922] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.122927] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.184563] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f
[ 19.187101] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 19.188232] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 19.189217] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 19.190531] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 19.408712] ath5k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[ 19.408749] ath5k_pci 0000:02:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 19.409426] ath5k_pci 0000:02:00.0: registered as 'phy0'
[ 19.498691] phy0: Selected rate control algorithm 'pid'
[ 19.577369] ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
[ 20.800467] lp0: using parport0 (interrupt-driven).
[ 21.069033] Adding 859436k swap on /dev/sda5. Priority:-1 extents:1 across:859436k
[ 21.703244] EXT3 FS on sda1, internal journal
[ 23.525610] type=1505 audit(1248047340.186:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1848
[ 23.680754] type=1505 audit(1248047340.342:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1852
[ 23.681412] type=1505 audit(1248047340.342:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1852
[ 23.681744] type=1505 audit(1248047340.342:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1852
[ 23.681974] type=1505 audit(1248047340.342:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1852
[ 24.109556] type=1505 audit(1248047340.770:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1857
[ 24.110996] type=1505 audit(1248047340.770:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1857
[ 24.209136] type=1505 audit(1248047340.870:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1861
[ 34.369264] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 80.822987] wlan0: authenticate with AP 00:1b:11:87:31:d6
[ 80.824548] wlan0: authenticated
[ 80.824693] wlan0: associate with AP 00:1b:11:87:31:d6
[ 80.832609] wlan0: RX AssocResp from 00:1b:11:87:31:d6 (capab=0x431 status=0 aid=2)
[ 80.832626] wlan0: associated
[ 80.833366] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 90.972076] wlan0: no IPv6 routers present
[ 136.608156] usb 1-2: new full speed USB device using ohci_hcd and address 2
[ 136.874017] usb 1-2: configuration #1 chosen from 1 choice
[ 136.985201] Initializing USB Mass Storage driver...
[ 136.992100] scsi2 : SCSI emulation for USB Mass Storage devices
[ 136.993182] usbcore: registered new interface driver usb-storage
[ 136.993195] USB Mass Storage support registered.
[ 137.046757] usb-storage: device found at 2
[ 137.046767] usb-storage: waiting for device to settle before scanning
[ 142.045576] usb-storage: device scan complete
[ 142.052556] scsi 2:0:0:0: Direct-Access Generic USB Flash Disk 0.00 PQ: 0 ANSI: 2
[ 142.117612] sd 2:0:0:0: [sdb] 8060927 512-byte hardware sectors: (4.12 GB/3.84 GiB)
[ 142.124535] sd 2:0:0:0: [sdb] Write Protect is off
[ 142.124552] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 142.124560] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 142.150541] sd 2:0:0:0: [sdb] 8060927 512-byte hardware sectors: (4.12 GB/3.84 GiB)
[ 142.157554] sd 2:0:0:0: [sdb] Write Protect is off
[ 142.157571] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 142.157579] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 142.157606] sdb: sdb1
[ 142.279756] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 142.280072] sd 2:0:0:0: Attached scsi generic sg2 type 0