Burner fails to burn media on 7.04

I always get the following error message no matter what I try to burn at which speed:

Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error (see details below)

Optical drive in an ACER 4002WLMI laptop (more hardware details at the end of this post):

root@4002WLMI:/# wodim -v --checkdrive dev=/dev/scd0
TOC Type: 1 = CD-ROM
scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.2
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'QSI '
Identification : 'DVD+-RW SDW-082 '
Revision : 'LX51'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0000 (Reserved/Unknown)
Profile: 0x0000 (Reserved/Unknown)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
Drive buf size : 1073152 = 1048 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.

I tried K3b, GnomeBaker, Brasero, Nero, and xcdroast with well chosen brand name media.I can't burn anything independent of media used and speed applied. Same burner works fine under openSUSE 10.2 where it is handled as IDE device (/dev/hdc). Related to this: there are no burning problems with Feisty on a 5 year old laptop where the burner (Toshiba ... - no detailed information right now) is handled as IDE device (/dev/hdc) as well. Another error message related to this might be:

root@4002WLMI:~# dmesg | tail
[ 2673.876000] TKIP: ICV error detected: STA=00:15:e9:1d:3c:22
[ 2705.576000] TKIP: ICV error detected: STA=00:15:e9:1d:3c:22
[ 2748.300000] TKIP: ICV error detected: STA=00:15:e9:1d:3c:22
[ 2803.352000] TKIP: ICV error detected: STA=00:15:e9:1d:3c:22
[ 2923.116000] TKIP: ICV error detected: STA=00:15:e9:1d:3c:22
[ 2984.520000] TKIP: ICV error detected: STA=00:15:e9:1d:3c:22
[ 3044.420000] TKIP: ICV error detected: STA=00:15:e9:1d:3c:22
[ 3163.124000] TKIP: ICV error detected: STA=00:15:e9:1d:3c:22
[ 3166.492000] TKIP: ICV error detected: STA=00:15:e9:1d:3c:22
[ 3209.036000] TKIP: ICV error detected: STA=00:15:e9:1d:3c:22

______________________________________________________________________________

Summary of the error messages created by K3b, GnomeBaker, Brasero, Nero, and xcdroast:

K3b 1.0: CD-R

System
-----------------------
K3b Version: 1.0

KDE Version: 3.5.6
QT Version: 3.3.7
Kernel: 2.6.20-15-generic
Devices
-----------------------
QSI DVD+-RW SDW-082 LX51 (/dev/scd0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96R, RAW/R16, RAW/R96R, Restricted Overwrite]

K3bIsoImager
-----------------------
mkisofs print size result: 357483 (732125184 bytes)
Pipe throughput: 276400896 bytes read, 276396544 bytes written.

Used versions
-----------------------
mkisofs: 1.1.2
cdrecord: 1.1.2

cdrecord
-----------------------
scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.2
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'QSI '
Identification : 'DVD+-RW SDW-082 '
Revision : 'LX51'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0000 (Reserved/Unknown)
Profile: 0x0000 (Reserved/Unknown)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
Drive buf size : 1073152 = 1048 KB
FIFO size : 12582912 = 12288 KB
Speed set to 2822 KB/s
Track 01: data 698 MB
Total size: 801 MB (79:26.44) = 357483 sectors
Lout start: 802 MB (79:28/33) = 357483 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in: -11634 (97:26/66)
  ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 2363
Starting to write CD/DVD at speed 16.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 5 (Input/output error), read track info scsi sendcmd: no error
CDB: 52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 28
cmd finished after 0.002s timeout 240s
/usr/bin/wodim: Cannot get next writable address for 'invisible' track.
/usr/bin/wodim: This means that we are checking recorded media.
/usr/bin/wodim: This media cannot be written in streaming mode anymore.
/usr/bin/wodim: If you like to write to 'preformatted' RW media, try to blank the media first.
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 0 of 698 MB written.
Track 01: 1 of 698 MB written (fifo 100%) [buf 87%] 3.7x.

[...]

Track 01: 251 of 698 MB written (fifo 99%) [buf 84%] 11.3x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 01 F7 DF 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 37.540s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 264173568 bytes
Writing time: 215.654s
Average write speed 22.1x.
Min drive buffer fill was 63%
Fixating...
Fixating time: 0.007s

GnomeBaker 0.6: CD-R

wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.34
Wodim version: 1.1.2
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'QSI '
Identification : 'DVD+-RW SDW-082 '
Revision : 'LX51'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
Drive buf size : 1073152 = 1048 KB
FIFO size : 12582912 = 12288 KB
Speed set to 2822 KB/s
 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 01 77 83 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 47 00 00 00 00 0E 09 0C 00 00 00 01 00 00
Sense Key: 0x7 Data Protect, Segment 11
Sense Code: 0x00 Qual 0x01 (filemark detected) Fru 0x0
Sense flags: Blk 0 (not valid) end of medium
resid: 63488
cmd finished after 0.639s timeout 40s
wodim: A write error occured.
wodim: Please properly read the error message above.

write track data: error after 196876288 bytes
Writing time: 149.320s
Average write speed 31.9x.
Min drive buffer fill was 87%
Fixating...
Fixating time: 37.929s

Brassero Brasero 0.5.2: DVD-R

imager (BraseroLocalImage) set_output
job (BraseroLocalImage) set_task
imager (BraseroLocalImage) get_track
job (BraseroLocalImage) set_task
Session starting:
 flags = 16727
 media type = 0
 speed = 3
 track type = 8
 track format = 2
 output = none
job (BraseroGrowisofs) set_rate
recorder (BraseroGrowisofs) set_drive
recorder (BraseroGrowisofs) set_flags
job (BraseroGrowisofs) set_source
job (BraseroGrowisofs) set_task
recorder (BraseroGrowisofs) record
process (BraseroGrowisofs) getting varg
growisofs (BraseroGrowisofs) set_action
process (BraseroGrowisofs) got varg:
 growisofs
 -use-the-force-luke=notray
 -use-the-force-luke=dao
 -speed=3
 -dvd-compat
 -use-the-force-luke=tty
 -Z
 /dev/scd0=/*/*.iso
process (BraseroGrowisofs) launching command
process (BraseroGrowisofs) stdout: Executing 'builtin_dd if=/*/*.iso of=/dev/scd0 obs=32k seek=0'
process (BraseroGrowisofs) stderr: /dev/scd0: engaging DVD-R DAO upon user request...
process (BraseroGrowisofs) stderr: /dev/scd0: reserving 1135069 blocks
process (BraseroGrowisofs) stderr: /dev/scd0: "Current Write Speed" is 4.1x1352KBps.
process (BraseroGrowisofs) stdout: 0/2324621312 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
process (BraseroGrowisofs) stdout: 0/2324621312 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
process (BraseroGrowisofs) stdout: 0/2324621312 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
process (BraseroGrowisofs) stdout: 0/2324621312 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
process (BraseroGrowisofs) stdout: 0/2324621312 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
process (BraseroGrowisofs) stdout: 0/2324621312 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
process (BraseroGrowisofs) stdout: 0/2324621312 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
process (BraseroGrowisofs) stdout: 0/2324621312 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0%
process (BraseroGrowisofs) stdout: 655360/2324621312 ( 0.0%) @0.1x, remaining 1950:20 RBU 100.0% UBU 4.8%
growisofs (BraseroGrowisofs) set_written
growisofs (BraseroGrowisofs) set_total
growisofs (BraseroGrowisofs) set_rate
growisofs (BraseroGrowisofs) set_action
growisofs (BraseroGrowisofs) start_progress
process (BraseroGrowisofs) stdout: 655360/2324621312 ( 0.0%) @0.0x, remaining 2127:39 RBU 100.0% UBU 100.0%
growisofs (BraseroGrowisofs) set_written
growisofs (BraseroGrowisofs) set_total
growisofs (BraseroGrowisofs) set_rate
growisofs (BraseroGrowisofs) set_action
growisofs (BraseroGrowisofs) start_progress

[...]

process (BraseroGrowisofs) stdout: 638844928/2324621312 (27.5%) @0.0x, remaining 12:03 RBU 100.0% UBU 100.0%
growisofs (BraseroGrowisofs) set_written
growisofs (BraseroGrowisofs) set_total
growisofs (BraseroGrowisofs) set_rate
growisofs (BraseroGrowisofs) set_action
growisofs (BraseroGrowisofs) start_progress
process (BraseroGrowisofs) stderr: :-[ WRITE@LBA=4cca0h failed with SK=7h/ASC=00h/ACQ=01h]: Input/output error
process (BraseroGrowisofs) stderr: :-( write failed: Input/output error
job (BraseroGrowisofs) asked to stop
 status = 1
 error = 1
 message = "Unhandled error, aborting"
iter (BraseroGrowisofs) stopping
process (BraseroGrowisofs) got killed
iter (BraseroGrowisofs) stopped
job (BraseroGrowisofs) got out of loop
job (BraseroGrowisofs) set_task
Session error : Unhandled error, aborting

[...]

Nero 3.0.0.0 beta: DVD-R

Linux 2.6.20-15-generic
Nero API version: 7.5.14.2
Using interface version: 7.5.0.2
Installed in: /usr/lib/nero/
Application: Nero AG\Nero Linux
Internal Version: 7, 5, 14, 2

Recorder: <QSI DVD+-RW SDW-082> Version: LX51 - HA 1 TA 0 - 0.0.0.0
 Adapter driver: <ata_piix> HA 1
 Drive buffer : 2048kB
 Bus Type : default (0) -> SCSI, detected: ?
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1248MB (1278524kB)
Free physical memory: 104MB (107404kB)
Memory in use : 91 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

22.5.2007
NeroAPI
08:23:51 PM #1 Text 0 File Burncd.cpp, Line 3490
 Turn on Disc-At-Once, using DVD media

08:23:52 PM #2 Text 0 File DlgWaitCD.cpp, Line 307
 Last possible write address on media: 2298495 (510:46.45, 4489MB)
 Last address to be written: 1135068 (252:14.18, 2216MB)

08:23:52 PM #3 Text 0 File DlgWaitCD.cpp, Line 319
 Write in overburning mode: NO

08:23:52 PM #4 Text 0 File DlgWaitCD.cpp, Line 2951
 Recorder: QSI DVD+-RW SDW-082, Media type: DVD-R
  Disc Manufacturer: RITEKF - 1
  Disc Application Code: 64, Disc Physical Code: 193

08:23:52 PM #5 Text 0 File DlgWaitCD.cpp, Line 493
 >>> Protocol of DlgWaitCD activities: <<<
 =========================================

08:23:52 PM #6 Text 0 File ThreadedTransferInterface.cpp, Line 792
 Setup items (after recorder preparation)
  0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
     2 indices, index0 (150) not provided
     original disc pos #0 + 1135069 (1135069) = #1135069/252:14.19
     not relocatable, disc pos for caching/writing not required/not required
     -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1135069 blocks [QSI DVD+-RW SDW-082 (H:1 T:0)]
 --------------------------------------------------------------

08:23:52 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 995
 Prepare [QSI DVD+-RW SDW-082 (H:1 T:0)] for write in CUE-sheet-DAO
 DAO infos:
 ==========
  MCN: ""
  TOCType: 0x00; Session Closed, disc fixated
  Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2324621312, ISRC ""
 DAO layout:
 ===========
  ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
         0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
         0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
         0 | 1 | 1 | 0x41 | 1135069 | 1135069 | 0x00
   1135069 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

08:23:52 PM #8 Text 0 File Burncd.cpp, Line 4263
 Caching options: cache CDRom or Network-No, small files-Yes (<32KB)

08:23:52 PM #9 Phase 24 File ExtendedProgress.cpp, Line 537
 Caching of files started

08:23:52 PM #10 Text 0 File Burncd.cpp, Line 4382
 Cache writing successful.

08:23:52 PM #11 Phase 25 File ExtendedProgress.cpp, Line 537
 Caching of files completed

08:23:52 PM #12 Phase 36 File ExtendedProgress.cpp, Line 537
 Burn process started at 4x (5540 KB/s)

08:23:52 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2712
 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

08:23:52 PM #14 Text 0 File DVDR.cpp, Line 3151
 Recording mode: Sequential Recording Mode

08:23:52 PM #15 Text 0 File DVDR.cpp, Line 3307
 Start write address at LBA 0
 DVD high compatibility mode: Yes

08:23:52 PM #16 Text 0 File Cdrdrv.cpp, Line 9885
 ---- Disc Structure: Physical Format Information (00h) ----
 Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
  Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
  Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
  Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
  Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
  Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
  End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
  Data in Burst Cutting Area (BCA) does not exist
   Revision number of maximum recording speed: 6.0
   Revision number of minimum recording speed: -
   Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
   Class: 0
   Start sector number of the current Border-Out: 2FE10 h
   Start sector number of the next Border-In: 2FFA0 h
  Media Specific [16..63]:
     00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
     00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
     00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

08:23:52 PM #17 Text 0 File ThreadedTransfer.cpp, Line 269
 Pipe memory size 83836800

08:23:53 PM #18 Text 0 File Cdrdrv.cpp, Line 1347
 20:23:53 - QSI DVD+-RW SDW-082 (H:1 T:0) : Queue again later

08:32:13 PM #19 SCSI -400 File SCSIInterface.cpp, Line 622
 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0xaee0bc40
 Status: 0x04 (0x01, SCSI_ERR)
 HA-Status 0x00 (0x00, OK)
 TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
 Sense Key: 0x07 (Unknown)
 Sense Code: 0x00
 Sense Qual: 0x01
 CDB Data: 0x2A 0x00 0x00 0x0E 0xC8 0x40 0x00 0x00 0x20 0x00
 Sense Data: 0x72 0x0B 0x47 0x00 0x00 0x00 0x00 0x0E
             0x09 0x0C 0x00 0x00 0x00 0x01

08:32:13 PM #20 CDR -400 File Writer.cpp, Line 299
 Unspecified target error
 QSI DVD+-RW SDW-082 (H:1 T:0)

08:32:13 PM #21 Text 0 File DVDR.cpp, Line 3709
 EndDAO: Last written address was 968767 (EC83Fh)

08:32:14 PM #22 Phase 38 File ExtendedProgress.cpp, Line 537
 Burn process failed at 4x (5540 KB/s)

xcdroast 0.98alpha15: DVD-R

Calling: /usr/lib/xcdroast/bin/xcdrwrap CDRECORDDVD dev= "1,0,0" gracetime=10 fs=4096k driveropts=burnfree -v -useinfo speed=4 -dao -eject -pad -data "/*/*.iso" ...

scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.34
Wodim version: 1.1.2
SCSI buffer size: 64512
TOC Type: 1 = CD-ROM
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
Driveropts: 'burnfree'
communication breaks or freezes immediately after that.
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'QSI '
Identification : 'DVD+-RW SDW-082 '
Revision : 'LX51'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0000 (Reserved/Unknown)
Profile: 0x0000 (Reserved/Unknown)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 688128 = 672 KB
Speed set to 5540 KB/s
FIFO size : 4194304 = 4096 KB
Track 01: data 2216 MB padsize: 30 KB
Total size: 2546 MB (252:14.45) = 1135084 sectors
Lout start: 2546 MB (252:16/34) = 1135084 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1163412
Starting to write CD/DVD at speed 4.0 in real SAO mode for single session.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 06 1B 52 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 47 00 00 00 00 0E 09 0C 00 00 00 01 00 00
Sense Key: 0x7 Data Protect, Segment 11
Sense Code: 0x00 Qual 0x01 (filemark detected) Fru 0x0
Sense flags: Blk 0 (not valid) end of medium
resid: 63488
cmd finished after 0.638s timeout 200s
wodim: A write error occured.
wodim: Please properly read the error message above.

write track data: error after 819630080 bytes
Writing time: 286.124s
Average write speed 5.9x.
Min drive buffer fill was 47%
Fixating...
Fixating time: 2.485s

____________________________________________________________________

root@4002WLMI:~# hwinfo
============ start debug info ============
libhd version 13.11 (ia32)
using /var/lib/hardware
kernel version is 2.6

[...]

30: udi = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_SDW_082'
  block.minor = 0 (0x0)
  storage.requires_eject = true
  info.capabilities = { 'storage', 'block', 'storage.cdrom' }
  storage.bus = 'scsi'
  storage.cdrom.support_media_changed = true
  storage.cdrom.support_multisession = true
  storage.removable.media_available = true
  storage.cdrom.hddvdr = false
  storage.cdrom.mrw_w = true
  info.category = 'storage'
  info.product = 'DVD+-RW SDW-082'
  storage.drive_type = 'cdrom'
  storage.hotpluggable = false
  storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_0_scsi_device_lun0'
  storage.cdrom.mrw = true
  storage.partitioning_scheme = ''
  storage.vendor = 'QSI'
  storage.media_check_enabled = true
  storage.cdrom.read_speed = 4234 (0x108a)
  org.freedesktop.Hal.Device.Storage.method_names = { 'Eject', 'CloseTray' }
  storage.cdrom.dvd = true
  storage.removable.media_size = 2048ull (0x800ull)
  block.is_volume = false
  storage.firmware_version = 'LX51'
  storage.cdrom.bdre = false
  storage.cdrom.mo = false
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_SDW_082'
  info.addons = { 'hald-addon-storage' }
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_0_scsi_device_lun0'
  storage.cdrom.dvdplusr = true
  storage.size = 0ull (0x0ull)
  storage.cdrom.write_speed = 4234 (0x108a)
  org.freedesktop.Hal.Device.Storage.method_signatures = { 'as', 'as' }
  block.device = '/dev/scd0'
  org.freedesktop.Hal.Device.Storage.method_argnames = { 'extra_options', 'extra_options' }
  storage.cdrom.cdr = true
  linux.fstab.mountpoint = '/media/cdrom0'
  storage.no_partitions_hint = true
  storage.cdrom.bdr = false
  storage.removable = true
  storage.lun = 0 (0x0)
  info.vendor = 'QSI'
  storage.cdrom.dvdram = false
  storage.cdrom.dvdplusrwdl = false
  storage.cdrom.write_speeds = { '4234', '3528', '2822', '2117', '1411' }
  storage.cdrom.dvdr = true
  info.interfaces = { 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage' }
  org.freedesktop.Hal.Device.Storage.method_execpaths = { 'hal-storage-eject', 'hal-storage-closetray' }
  storage.originating_device = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_0_scsi_device_lun0'
  storage.model = 'DVD+-RW SDW-082'
  info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_SDW_082'
  storage.cdrom.dvdplusrdl = true
  storage.cdrom.bd = false
  storage.cdrom.hddvdrw = false
  block.major = 11 (0xb)
  linux.hotplug_type = 3 (0x3)
  storage.cdrom.cdrw = true
  storage.cdrom.dvdplusrw = true
  linux.sysfs_path = '/sys/block/sr0'
  storage.cdrom.dvdrw = true
  linux.fstab.options = 'user,noauto'
  storage.automount_enabled_hint = true
  storage.cdrom.hddvd = false

[...]

92: udi = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_0_scsi_device_lun0'
  scsi.vendor = 'QSI'
  scsi.bus = 0 (0x0)
  info.bus = 'scsi'
  scsi.target = 0 (0x0)
  scsi.lun = 0 (0x0)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_0_scsi_device_lun0'
  linux.subsystem = 'scsi'
  info.subsystem = 'scsi'
  info.product = 'SCSI Device'
  scsi.model = 'DVD+-RW SDW-082'
  linux.hotplug_type = 2 (0x2)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host1/target1:0:0/1:0:0:0'
  scsi.host = 1 (0x1)
  scsi.type = 'cdrom'
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24ca_scsi_host_0'
  info.linux.driver = 'sr'

[...]

serial id len: 20
  block: name = sr0, path = /block/sr0
    dev = 11:0
    range = 1
    block device: bus = scsi, bus_id = 1:0:0:0 driver = sr
      path = /devices/pci0000:00/0000:00:1f.1/host1/target1:0:0/1:0:0:0
    vendor = QSI
    model = DVD+-RW SDW-082
    rev = LX51
    type = 5
>> block.5: /dev/sr0
>> block.5.1: /dev/sr0 cache

[...]

P: /block/sr0
  N: scd0
  L: 0
  S: sr0
  S: cdrom
  S: cdrw
  S: dvd
  S: dvdrw
  S: disk/by-path/pci-0000:00:1f.1-scsi-1:0:0:0
  E: ID_CDROM=1
  E: ID_CDROM_CD_R=1
  E: ID_CDROM_CD_RW=1
  E: ID_CDROM_DVD=1
  E: ID_CDROM_DVD_R=1
  E: ID_CDROM_MRW=1
  E: ID_CDROM_MRW_W=1
  E: ID_CDROM_RAM=1
  E: ID_VENDOR=QSI
  E: ID_MODEL=DVD+-RW_SDW-082
  E: ID_REVISION=LX51
  E: ID_SERIAL=
  E: ID_SERIAL_SHORT=����B���i
����@=������

  E: ID_TYPE=cd
  E: ID_BUS=scsi
  E: ID_PATH=pci-0000:00:1f.1-scsi-1:0:0:0

[...]

47: SCSI 100.0: 10602 CD-ROM (DVD)
  [Created at block.222]
  UDI: /org/freedesktop/Hal/devices/storage_model_DVD__RW_SDW_082
  Unique ID: twPO.wqK6Q1DnJK8
  Parent ID: 3p2J.08nKgOlbNd4
  SysFS ID: /block/sr0
  SysFS BusID: 1:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/host1/target1:0:0/1:0:0:0
  Hardware Class: cdrom
  Model: "QSI DVD+-RW SDW-082"
  Vendor: "QSI"
  Device: "DVD+-RW SDW-082"
  Revision: "LX51"
  Driver: "ata_piix", "sr"
  Driver Modules: "ata_piix"
  Device File: /dev/sr0 (/dev/sg1)
  Device Files: /dev/sr0, /dev/scd0, /dev/cdrom, /dev/cdrw, /dev/dvd, /dev/dvdrw, /dev/disk/by-path/pci-0000:00:1f.1-scsi-1:0:0:0
  Device Number: block 11:0 (char 21:1)
  Features: CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+DL
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #23 (IDE interface)
  Drive Speed: 24