USB card errors at boot (sometimes) and working again after disconnect-connect usb

When the problem reproduces, it shows up the next error messages in dmesg at boot:

[ 9.075023] usb 1-10: 4:0: usb_set_interface failed (-110)
[ 9.077334] usb 1-10: 1:1: usb_set_interface failed (-71)
[ 9.078562] usb 1-10: 1:1: usb_set_interface failed (-71)
[ 9.079902] usb 1-10: 1:1: usb_set_interface failed (-71)
[ 9.081335] usb 1-10: 1:1: usb_set_interface failed (-71)
[ 9.082681] usb 1-10: 1:1: usb_set_interface failed (-71)
[ 9.084921] usb 1-10: 1:1: usb_set_interface failed (-71)
[ 9.086072] usb 1-10: 1:1: usb_set_interface failed (-71)
[ 9.087196] usb 1-10: 1:1: usb_set_interface failed (-71)
[ 9.088276] usb 1-10: 1:1: usb_set_interface failed (-71)
[ 15.987510] usb 1-10: 3:1: usb_set_interface failed (-71)
[ 15.988338] usb 1-10: 3:1: usb_set_interface failed (-71)
[ 15.989165] usb 1-10: 3:1: usb_set_interface failed (-71)
[ 15.990017] usb 1-10: 3:1: usb_set_interface failed (-71)
[ 15.990893] usb 1-10: 3:1: usb_set_interface failed (-71)
[ 15.992101] usb 1-10: 3:1: usb_set_interface failed (-71)
[ 15.992925] usb 1-10: 3:1: usb_set_interface failed (-71)
[ 15.993782] usb 1-10: 3:1: usb_set_interface failed (-71)
[ 15.994661] usb 1-10: 3:1: usb_set_interface failed (-71)
[ 15.995530] usb 1-10: 3:1: usb_set_interface failed (-71)
[ 16.202925] usb 1-10: cannot submit urb 0, error -2: endpoint not enabled
[ 17.257407] usb 1-10: cannot submit urb 0, error -2: endpoint not enabled
[ 17.257466] usb 1-10: cannot submit urb 0, error -2: endpoint not enabled
[ 17.257502] usb 1-10: cannot submit urb 0, error -2: endpoint not enabled
[ 17.257517] usb 1-10: cannot submit urb 0, error -2: endpoint not enabled
[ 17.915323] usb 1-10: cannot submit urb 0, error -2: endpoint not enabled
[ 17.915357] usb 1-10: cannot submit urb 0, error -2: endpoint not enabled
[ 17.915384] usb 1-10: cannot submit urb 0, error -2: endpoint not enabled
[ 17.915399] usb 1-10: cannot submit urb 0, error -2: endpoint not enabled
[ 21.204309] usb 1-10: cannot submit urb 0, error -2: endpoint not enabled
[ 21.205375] usb 1-10: 4:0: usb_set_interface failed (-71)

When manually disconnect and connect again USB cable to the same port (USB 2.0) with the system started, It begins working again:

[ 61.829251] usb 1-10: USB disconnect, device number 4
[ 67.997960] usb 1-10: new full-speed USB device number 5 using xhci_hcd
[ 68.149692] usb 1-10: New USB device found, idVendor=041e, idProduct=3232, bcdDevice= 1.00
[ 68.149708] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 68.149714] usb 1-10: Product: USB Sound Blaster HD
[ 68.149719] usb 1-10: Manufacturer: Creative Technology
[ 68.149724] usb 1-10: SerialNumber: 000001DY
[ 68.191617] input: Creative Technology USB Sound Blaster HD as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.5/0003:041E:3232.0007/input/input26
[ 68.250542] hid-generic 0003:041E:3232.0007: input,hidraw3: USB HID v1.11 Device [Creative Technology USB Sound Blaster HD] on usb-0000:00:14.0-10/input5

System is a 22.04 updated and fresh install:
Description: Ubuntu 22.04.4 LTS
Release: 22.04
Kernel: 6.5.0-25-generic x86_64

PC is Dell OptiPlex 3080:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 8087:0029 Intel Corp. AX200 Bluetooth
Bus 001 Device 005: ID 041e:3232 Creative Technology, Ltd Sound Blaster Premium HD [SBX]
Bus 001 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

In Windows, it is always working fine (for discarding USB cable problem).