Ubuntu

HP Printer MFP M130nw doesn't scan in 20.04.1

Asked by kamyogi on 2020-12-12

I've recently upgraded Ubuntu from 18.04.1 to 20.04 .1 LTS through the Update Manager. Since then, while the 'Document Scanner' is launched, it detects the HP scanner (Laser Jet Pro MFP M130nw, 3-in-1). But, when the Scan is launched, 'Failed to scan, unable to connect to server' message displays. The Printer works, but not the Scanner. What could be wrong? Thanks for your help.

hp-check -t

kam@kam-G41M-Combo:~$ hp-check -t
Saving output in log file: /home/kam/hp-check.log

HP Linux Imaging and Printing System (ver. 3.20.3)
Dependency/Version Check Utility ver. 15.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).

Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION

Status Types:
    OK
    MISSING - Missing Dependency or Permission or Plug-in
    INCOMPAT - Incompatible dependency-version or Plugin-version

warning: ubuntu-20.04 version is not supported. Using ubuntu-19.10 versions dependencies to verify and install...

---------------
| SYSTEM INFO |
---------------

Kernel: 5.4.0-58-generic #64-Ubuntu SMP Wed Dec 9 08:16:25 UTC 2020 GNU/Linux
Host: kam-G41M-Combo
Proc: 5.4.0-58-generic #64-Ubuntu SMP Wed Dec 9 08:16:25 UTC 2020 GNU/Linux
Distribution: ubuntu 20.04
Bitness: 64 bit

-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.20.3
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 20.04 version

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.20.3

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.20.3
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no

Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.17.10

Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/simple-scan %SANE_URI%

[fax]
email_address =
voice_phone =

[installation]
date_time = 12/20/20 17:52:33
version = 3.20.3

[last_used]
device_uri = hpaio:/usb/HP_LaserJet_MFP_M129-M134?serial=VNFYC16682
printer_name = HP-LaserJet-MFP-M129-M134
working_dir = .

[polling]
device_list =
enable = false
interval = 5

[refresh]
enable = false
rate = 30
type = 1

[settings]
systray_messages = 0
systray_visible = 2

[upgrade]
last_upgraded_time = 1580400858
notify_upgrade = true
pending_upgrade_time = 0

<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>

-------------------------
| External Dependencies |
-------------------------

error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK -
error: dbus DBus - Message bus system REQUIRED - 1.12.16 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.20.3 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -

------------------------
| General Dependencies |
------------------------

error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
error: libpthread libpthread - POSIX threads library REQUIRED - b'2.31' MISSING 'libpthread needs to be installed'
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.5 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.9 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.8.5 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 7.0.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.34 OK -

--------------
| COMPILEDEP |
--------------

error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
error: gcc gcc - GNU Project C and C++ Compiler REQUIRED - - MISSING 'gcc needs to be installed'
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK -

---------------------
| Python Extentions |
---------------------

cupsext CUPS-Extension REQUIRED - 3.20.3 OK -
hpmudext IO-Extension REQUIRED - 3.20.3 OK -

----------------------
| Scan Configuration |
----------------------

'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.20.3 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.20.3 OK -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

device `hpaio:/usb/HP_LaserJet_MFP_M129-M134?serial=VNFYC16682' is a Hewlett-Packard HP_LaserJet_MFP_M129-M134 all-in-one

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI Model
  -------------------------------- -------------------------
  hp:/usb/HP_LaserJet_MFP_M129-M13 HP LaserJet MFP M129-M134
  4?serial=VNFYC16682

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

HP-LaserJet-MFP-M129-M134
-------------------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_MFP_M129-M134?serial=VNFYC16682
PPD: /etc/cups/ppd/HP-LaserJet-MFP-M129-M134.ppd
warning: Failed to read /etc/cups/ppd/HP-LaserJet-MFP-M129-M134.ppd ppd file
PPD Description:
Printer status: printer HP-LaserJet-MFP-M129-M134 is idle. enabled since dim. 20 déc. 2020 17:50:50
Communication status: Good

HP-LaserJet-MFP-M129-M134-Fax-2
-------------------------------
Type: Fax
Device URI: hpfax:/usb/HP_LaserJet_MFP_M129-M134?serial=VNFYC16682
PPD: /etc/cups/ppd/HP-LaserJet-MFP-M129-M134-Fax-2.ppd
warning: Failed to read /etc/cups/ppd/HP-LaserJet-MFP-M129-M134-Fax-2.ppd ppd file
PPD Description:
Printer status: printer HP-LaserJet-MFP-M129-M134-Fax-2 is idle. enabled since dim. 20 déc. 2020 17:50:50
Communication status: Good

HP_LaserJet_MFP_M129-M134
-------------------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_MFP_M129-M134?serial=VNFYC16682
PPD: /etc/cups/ppd/HP_LaserJet_MFP_M129-M134.ppd
warning: Failed to read /etc/cups/ppd/HP_LaserJet_MFP_M129-M134.ppd ppd file
PPD Description:
Printer status: printer HP_LaserJet_MFP_M129-M134 is idle. enabled since dim. 20 déc. 2020 17:50:50
Communication status: Good

HP_LaserJet_MFP_M129-M134_fax
-----------------------------
Type: Fax
Device URI: hpfax:/usb/HP_LaserJet_MFP_M129-M134?serial=VNFYC16682
PPD: /etc/cups/ppd/HP_LaserJet_MFP_M129-M134_fax.ppd
warning: Failed to read /etc/cups/ppd/HP_LaserJet_MFP_M129-M134_fax.ppd ppd file
PPD Description:
Printer status: printer HP_LaserJet_MFP_M129-M134_fax is idle. enabled since dim. 20 déc. 2020 17:50:50
Communication status: Good

--------------
| PERMISSION |
--------------

USB HP-LaserJet-MFP-M129-M134 Required - - OK Node:'/dev/bus/usb/001/007' Perm:' root lp rw- rw- rw- rw- r--'

-----------
| SUMMARY |
-----------

Missing Required Dependencies
-----------------------------
error: 'libcups2' package is missing/incompatible
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'build-essential' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libusb-0.1-4' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
error: 'build-essential' package is missing/incompatible

Missing Optional Dependencies
-----------------------------
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'xsane' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible

Total Errors: 16
Total Warnings: 0

Done.
kam@kam-G41M-Combo:~$