Ubuntu

Hp TX2500 Card Reader not working after upgrading to 9.04

Asked by Jay

Card Reader was working fine with 8.10, After upgrading to 9.04 it stops working....
nothing happening after inserting the card

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Solved by:
actionparsnip
Solved:
Last query:
Last reply:
Revision history for this message
actionparsnip (andrew-woodhead666) said : 		#1

If you have a card in the reader does the partition show up in the output of:

sudo fdisk -l

Can you please provide the output of the above command as well as:

lsusb

Thanks

Revision history for this message
Jay (jay-djsoftwares) said : 		#2

Hi... find the output of the respective commands

sudo fdisk -l

Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xb83472de

   Device Boot Start End Blocks Id System
/dev/sda1 * 1 29362 235850233+ 83 Linux
/dev/sda2 29363 30401 8345767+ 5 Extended
/dev/sda5 29363 30401 8345736 82 Linux swap / Solaris

lsusb

Bus 007 Device 003: ID 056a:0093 Wacom Co., Ltd
Bus 007 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 064e:a104 Suyin Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

i tried booting from 8.10 CD, Card reader was working.... mount autmatically.....

Revision history for this message
actionparsnip (andrew-woodhead666) said : 		#3

Ok can you get the output of lsusb and sudo fdisk -l in the live environment and we'll see what we have. You can mount your internal drive in the live cd and output the commands to file using redirection (or you can use an internet pastebin to hold it, then paste it properly here)

lsusb > ~/output.txt
sudo fdisk -l >> ~/output.txt

You can then copy the file to the internal drive if you mount it etc.

Revision history for this message
Jay (jay-djsoftwares) said : 		#4

Hi... Find the output of Live enivronmnet

ubuntu@ubuntu:~$ lsusb
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 003: ID 056a:0093 Wacom Co., Ltd
Bus 007 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 064e:a104 Suyin Corp.
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
ubuntu@ubuntu:~$ sudo fdisk -l

Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xb83472de

   Device Boot Start End Blocks Id System
/dev/sda1 * 1 29362 235850233+ 83 Linux
/dev/sda2 29363 30401 8345767+ 5 Extended
/dev/sda5 29363 30401 8345736 82 Linux swap / Solaris

Disk /dev/sdb: 2016 MB, 2016411648 bytes
128 heads, 32 sectors/track, 961 cylinders
Units = cylinders of 4096 * 512 = 2097152 bytes
Disk identifier: 0x00000000

   Device Boot Start End Blocks Id System
/dev/sdb1 * 1 961 1967840 6 FAT16
Partition 1 has different physical/logical endings:
     phys=(962, 127, 32) logical=(960, 111, 29)
ubuntu@ubuntu:~$

Revision history for this message
Jay (jay-djsoftwares) said : 		#5

Hi... Find the output of Live enivronmnet

ubuntu@ubuntu:~$ lsusb
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 003: ID 056a:0093 Wacom Co., Ltd
Bus 007 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 064e:a104 Suyin Corp.
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
ubuntu@ubuntu:~$ sudo fdisk -l

Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xb83472de

   Device Boot Start End Blocks Id System
/dev/sda1 * 1 29362 235850233+ 83 Linux
/dev/sda2 29363 30401 8345767+ 5 Extended
/dev/sda5 29363 30401 8345736 82 Linux swap / Solaris

Disk /dev/sdb: 2016 MB, 2016411648 bytes
128 heads, 32 sectors/track, 961 cylinders
Units = cylinders of 4096 * 512 = 2097152 bytes
Disk identifier: 0x00000000

   Device Boot Start End Blocks Id System
/dev/sdb1 * 1 961 1967840 6 FAT16
Partition 1 has different physical/logical endings:
     phys=(962, 127, 32) logical=(960, 111, 29)
ubuntu@ubuntu:~$

Revision history for this message
Best actionparsnip (andrew-woodhead666) said : 		#6

Ok the lsusb are identical

What I can suggest is reboot to the installed system WITHOUT the FAT16 card in. Once its all booted, insert the card and wait 20 seconds or so, then run:

clear; dmesg | tail

which will show you whats going on when the card is inserted.

If you have the card plugged in, you could try restarting the USB service with:

sudo rmmod usb_storage ; sudo modprobe usb_storage

This may help too

Revision history for this message
Jay (jay-djsoftwares) said : 		#7

Thanks for your Support.....
Its Working

Revision history for this message
Jay (jay-djsoftwares) said : 		#8

Thanks actionparsnip, that solved my question.

Revision history for this message
actionparsnip (andrew-woodhead666) said : 		#9

cool, as long as you get a goal its awesome :D