Ubuntu

sata disk not found in intel D975XBX2 Motherboard

Asked by setelsis

I have an INTEL D975XBX2 motherboard, I have 3 Disk SATA2 (2 disk HITACHI of 250 GB With Windows XP in RAID1 and 1 disk of 80 GB with Linux)connect in the SATA connector of the intel and another Disk SATA1 (Maxtor 6y160M0 of 160 GB) connect in the SECONDARY SATA controller of the motherboard (MARVELL SATA).

Both SATA controllers are integrated in the motherboard.

The bios see the 4 disks, and Windows XP too, but UBUNTU don see the disk Maxtor connect in the MARVELL SATA.

The lspci is:

00:00.0 Host bridge: Intel Corporation 82975X Memory Controller Hub
00:01.0 PCI bridge: Intel Corporation 82975X PCI Express Root Port
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GH (ICH7DH) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 RAID bus controller: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA Storage Controller RAID (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 7280 (rev 9a)
01:00.1 Display controller: ATI Technologies Inc Unknown device 72a0 (rev 9a)
03:00.0 SATA controller: Marvell Technology Group Ltd. Unknown device 6145 (rev a1)
04:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
05:00.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
05:02.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
05:02.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
05:02.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
05:04.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

can see all 4 drives in my BIOS and when I type sudo fdisk -l

Disco /dev/sda: 250.0 GB, 250059350016 bytes
255 cabezas, 63 sectores/pista, 30401 cilindros
Unidades = cilindros de 16065 * 512 = 8225280 bytes

Disposit. Inicio Comienzo Fin Bloques Id Sistema
/dev/sda1 * 1 30401 244196001 7 HPFS/NTFS

Disco /dev/sdb: 250.0 GB, 250059350016 bytes
255 cabezas, 63 sectores/pista, 30401 cilindros
Unidades = cilindros de 16065 * 512 = 8225280 bytes

Disposit. Inicio Comienzo Fin Bloques Id Sistema
/dev/sdb1 * 1 30401 244196001 7 HPFS/NTFS

Disco /dev/sdc: 82.3 GB, 82348277760 bytes
255 cabezas, 63 sectores/pista, 10011 cilindros
Unidades = cilindros de 16065 * 512 = 8225280 bytes

Disposit. Inicio Comienzo Fin Bloques Id Sistema
/dev/sdc1 * 1 9598 77095903+ 83 Linux
/dev/sdc2 9599 10011 3317422+ 5 Extendida
/dev/sdc5 9599 10011 3317391 82 Linux swap / Solaris

Question information

Language:
English Edit question
Status:
Answered
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
Felipe Lerena (lipe) said : 		#1

You might have to install dmraid to see that disk.

Revision history for this message
setelsis (imartin) said : 		#2

The dmraid is install.
dmraid -r
/dev/sda: isw, "isw_dfiacdajbb", GROUP, ok, 488397166 sectors, data@ 0
/dev/sdb: isw, "isw_dfiacdajbb", GROUP, ok, 488397166 sectors, data@ 0

dmraid -b
/dev/sda: 488397168 total, "VFA100R10XVJDK"
/dev/sdb: 488397168 total, "VFA100R10KUWEK"
/dev/sdc: 160836480 total, "PFDHW3EJUWUM4H"

Don't see the four disk.

Revision history for this message
Alan Pope 🍺🐧🐱 🦄 (popey) said : 		#3

Can you take the output of the "dmesg" command and pastebin it? http://pastebin.ubuntu-uk.org/

Also pastebin the result of "sudo lshw".

Revision history for this message
setelsis (imartin) said : 		#4

sudo dmesg
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000008f000 end: 000000000008f000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000008f000 size: 0000000000011000 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000007ecf8000 end: 000000007edf8000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000007edf8000 size: 000000000009a000 end: 000000007ee92000 type: 4
[ 0.000000] copy_e820_map() start: 000000007ee92000 size: 0000000000ef3000 end: 000000007fd85000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000007fd85000 size: 0000000000008000 end: 000000007fd8d000 type: 2
[ 0.000000] copy_e820_map() start: 000000007fd8d000 size: 000000000009f000 end: 000000007fe2c000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000007fe2c000 size: 0000000000004000 end: 000000007fe30000 type: 2
[ 0.000000] copy_e820_map() start: 000000007fe30000 size: 0000000000079000 end: 000000007fea9000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000007fea9000 size: 0000000000005000 end: 000000007feae000 type: 3
[ 0.000000] copy_e820_map() start: 000000007feae000 size: 0000000000044000 end: 000000007fef2000 type: 4
[ 0.000000] copy_e820_map() start: 000000007fef2000 size: 0000000000001000 end: 000000007fef3000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000007fef3000 size: 000000000000c000 end: 000000007feff000 type: 3
[ 0.000000] copy_e820_map() start: 000000007feff000 size: 0000000000001000 end: 000000007ff00000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000007ff00000 size: 0000000000100000 end: 0000000080000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007edf8000 (usable)
[ 0.000000] BIOS-e820: 000000007edf8000 - 000000007ee92000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ee92000 - 000000007fd85000 (usable)
[ 0.000000] BIOS-e820: 000000007fd85000 - 000000007fd8d000 (reserved)
[ 0.000000] BIOS-e820: 000000007fd8d000 - 000000007fe2c000 (usable)
[ 0.000000] BIOS-e820: 000000007fe2c000 - 000000007fe30000 (reserved)
[ 0.000000] BIOS-e820: 000000007fe30000 - 000000007fea9000 (usable)
[ 0.000000] BIOS-e820: 000000007fea9000 - 000000007feae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007feae000 - 000000007fef2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fef2000 - 000000007fef3000 (usable)
[ 0.000000] BIOS-e820: 000000007fef3000 - 000000007feff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007feff000 - 000000007ff00000 (usable)
[ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fe200
[ 0.000000] Entering add_active_range(0, 0, 524032) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524032
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524032
[ 0.000000] On node 0 totalpages: 524032
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2302 pages used for memmap
[ 0.000000] HighMem zone: 292354 pages, LIFO batch:31
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP (v000 INTEL ) @ 0x000fe020
[ 0.000000] ACPI: RSDT (v001 INTEL D975XBX2 0x00000a84 0x01000013) @ 0x7fefd038
[ 0.000000] ACPI: FADT (v001 INTEL D975XBX2 0x00000a84 MSFT 0x01000013) @ 0x7fefc000
[ 0.000000] ACPI: MADT (v001 INTEL D975XBX2 0x00000a84 MSFT 0x01000013) @ 0x7fef7000
[ 0.000000] ACPI: WDDT (v001 INTEL D975XBX2 0x00000a84 MSFT 0x01000013) @ 0x7fef6000
[ 0.000000] ACPI: MCFG (v001 INTEL D975XBX2 0x00000a84 MSFT 0x01000013) @ 0x7fef5000
[ 0.000000] ACPI: ASF! (v032 INTEL D975XBX2 0x00000a84 MSFT 0x01000013) @ 0x7fef4000
[ 0.000000] ACPI: HPET (v001 INTEL D975XBX2 0x00000a84 MSFT 0x01000013) @ 0x7fef3000
[ 0.000000] ACPI: SSDT (v001 INTEL CpuPm 0x00000a84 MSFT 0x01000013) @ 0x7fead000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu0Ist 0x00000a84 MSFT 0x01000013) @ 0x7feac000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu1Ist 0x00000a84 MSFT 0x01000013) @ 0x7feab000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu2Ist 0x00000a84 MSFT 0x01000013) @ 0x7feaa000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu3Ist 0x00000a84 MSFT 0x01000013) @ 0x7fea9000
[ 0.000000] ACPI: DSDT (v001 INTEL D975XBX2 0x00000a84 MSFT 0x01000013) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ff00000)
[ 0.000000] Detected 2666.823 MHz processor.
[ 40.249393] Built 1 zonelists. Total pages: 519938
[ 40.249396] Kernel command line: root=UUID=d2a18fa6-b529-4981-a255-46c521faea64 ro quiet splash locale=es_ES
[ 40.249496] mapped APIC to ffffd000 (fee00000)
[ 40.249497] mapped IOAPIC to ffffc000 (fec00000)
[ 40.249499] Enabling fast FPU save and restore... done.
[ 40.249500] Enabling unmasked SIMD FPU exception support... done.
[ 40.249506] Initializing CPU#0
[ 40.249548] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 40.250343] Console: colour VGA+ 80x25
[ 40.250524] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 40.250712] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 40.299018] Memory: 2065844k/2096128k available (1992k kernel code, 27832k reserved, 893k data, 328k init, 1177620k highmem)
[ 40.299024] virtual kernel memory layout:
[ 40.299025] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 40.299025] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 40.299026] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 40.299027] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 40.299027] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 40.299028] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 40.299029] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 40.299031] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 40.299134] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 40.299138] hpet0: 3 64-bit timers, 14318180 Hz
[ 40.300138] Using HPET for base-timer
[ 40.378931] Calibrating delay using timer specific routine.. 5337.22 BogoMIPS (lpj=10674457)
[ 40.378958] Security Framework v1.0.0 initialized
[ 40.378963] SELinux: Disabled at boot.
[ 40.378973] Mount-cache hash table entries: 512
[ 40.379069] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 40.379074] monitor/mwait feature present.
[ 40.379075] using mwait in idle threads.
[ 40.379078] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 40.379079] CPU: L2 cache: 4096K
[ 40.379081] CPU: Physical Processor ID: 0
[ 40.379082] CPU: Processor Core ID: 0
[ 40.379083] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 40.379090] Compat vDSO mapped to ffffe000.
[ 40.379093] Remapping vsyscall page to ffffe000
[ 40.379101] Checking 'hlt' instruction... OK.
[ 40.394982] SMP alternatives: switching to UP code
[ 40.395261] Early unpacking initramfs... done
[ 40.597831] ACPI: Core revision 20060707
[ 40.598593] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 40.600681] CPU0: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz stepping 06
[ 40.600694] SMP alternatives: switching to SMP code
[ 40.600747] Booting processor 1/1 eip 3000
[ 40.611199] Initializing CPU#1
[ 40.690129] Calibrating delay using timer specific routine.. 5333.62 BogoMIPS (lpj=10667250)
[ 40.690134] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 40.690137] monitor/mwait feature present.
[ 40.690139] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 40.690140] CPU: L2 cache: 4096K
[ 40.690141] CPU: Physical Processor ID: 0
[ 40.690142] CPU: Processor Core ID: 1
[ 40.690143] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 40.690608] CPU1: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz stepping 06
[ 40.690622] Total of 2 processors activated (10670.85 BogoMIPS).
[ 40.690752] ENABLING IO-APIC IRQs
[ 40.690910] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 40.837751] checking TSC synchronization across 2 CPUs: passed.
[ 0.003990] Brought up 2 CPUs
[ 0.081773] migration_cost=27
[ 0.081946] Booting paravirtualized kernel on bare hardware
[ 0.081999] Time: 14:27:48 Date: 04/17/107
[ 0.082016] NET: Registered protocol family 16
[ 0.082071] EISA bus registered
[ 0.082075] ACPI: bus type pci registered
[ 0.083590] PCI: Using configuration type 1
[ 0.083591] Setting up standard PCI resources
[ 0.096059] ACPI: Interpreter enabled
[ 0.096060] ACPI: Using IOAPIC for interrupt routing
[ 0.096328] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.096334] PCI: Probing PCI hardware (bus 00)
[ 0.096344] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 0.097523] Boot video device is 0000:01:00.0
[ 0.098169] PCI: Transparent bridge - 0000:00:1e.0
[ 0.098217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.100517] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.100823] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.100961] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.101097] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.101231] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.101369] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.101506] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.101641] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.101775] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.102574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.102842] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.102979] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.103731] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.103737] pnp: PnP ACPI init
[ 0.105405] pnp: PnP ACPI: found 12 devices
[ 0.105408] PnPBIOS: Disabled by ACPI PNP
[ 0.105434] PCI: Using ACPI for IRQ routing
[ 0.105436] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.105507] NET: Registered protocol family 8
[ 0.105509] NET: Registered protocol family 20
[ 0.105558] pnp: 00:06: ioport range 0x500-0x53f has been reserved
[ 0.105560] pnp: 00:06: ioport range 0x400-0x47f could not be reserved
[ 0.105562] pnp: 00:06: ioport range 0x680-0x6ff has been reserved
[ 0.105755] PCI: Bridge: 0000:00:01.0
[ 0.105757] IO window: 3000-3fff
[ 0.105759] MEM window: 93300000-933fffff
[ 0.105762] PREFETCH window: 80000000-8fffffff
[ 0.105764] PCI: Bridge: 0000:00:1c.0
[ 0.105765] IO window: disabled.
[ 0.105768] MEM window: 93500000-935fffff
[ 0.105771] PREFETCH window: disabled.
[ 0.105774] PCI: Bridge: 0000:00:1c.4
[ 0.105776] IO window: 2000-2fff
[ 0.105779] MEM window: 93200000-932fffff
[ 0.105782] PREFETCH window: 93600000-936fffff
[ 0.105786] PCI: Bridge: 0000:00:1c.5
[ 0.105787] IO window: 1000-1fff
[ 0.105791] MEM window: 93100000-931fffff
[ 0.105793] PREFETCH window: disabled.
[ 0.105797] PCI: Bridge: 0000:00:1e.0
[ 0.105798] IO window: disabled.
[ 0.105801] MEM window: 90000000-930fffff
[ 0.105804] PREFETCH window: disabled.
[ 0.105813] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.105817] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.105830] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.105833] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.105846] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.105849] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.105862] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.105865] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.105873] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.105889] NET: Registered protocol family 2
[ 0.155882] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.155939] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.156222] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.156367] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.156368] TCP reno registered
[ 0.172012] checking if image is initramfs... it is
[ 0.569130] Freeing initrd memory: 6901k freed
[ 0.569567] audit: initializing netlink socket (disabled)
[ 0.569579] audit(1179412068.192:1): initialized
[ 0.569642] highmem bounce pool size: 64 pages
[ 0.569698] VFS: Disk quotas dquot_6.5.1
[ 0.569711] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.569745] io scheduler noop registered
[ 0.569747] io scheduler anticipatory registered
[ 0.569748] io scheduler deadline registered
[ 0.569755] io scheduler cfq registered (default)
[ 0.570036] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.570061] assign_interrupt_mode Found MSI capability
[ 0.570062] Allocate Port Service[0000:00:01.0:pcie00]
[ 0.570119] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.570150] assign_interrupt_mode Found MSI capability
[ 0.570152] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.570175] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.570244] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.570275] assign_interrupt_mode Found MSI capability
[ 0.570276] Allocate Port Service[0000:00:1c.4:pcie00]
[ 0.570297] Allocate Port Service[0000:00:1c.4:pcie02]
[ 0.570366] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.570397] assign_interrupt_mode Found MSI capability
[ 0.570398] Allocate Port Service[0000:00:1c.5:pcie00]
[ 0.570419] Allocate Port Service[0000:00:1c.5:pcie02]
[ 0.570533] isapnp: Scanning for PnP cards...
[ 0.922473] isapnp: No Plug & Play device found
[ 0.935531] Real Time Clock Driver v1.12ac
[ 0.935576] hpet_resources: 0xfed00000 is busy
[ 0.935584] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.935684] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.936083] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.936206] mice: PS/2 mouse device common for all mice
[ 0.936560] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 0.936658] input: Macintosh mouse button emulation as /class/input/input0
[ 0.936682] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 0.936685] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 0.936825] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.936827] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 0.939684] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.939687] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.939767] EISA: Probing bus 0 at eisa.0
[ 0.939771] Cannot allocate resource for EISA slot 1
[ 0.939773] Cannot allocate resource for EISA slot 2
[ 0.939774] Cannot allocate resource for EISA slot 3
[ 0.939775] Cannot allocate resource for EISA slot 4
[ 0.939787] EISA: Detected 0 cards.
[ 0.965914] input: AT Translated Set 2 keyboard as /class/input/input1
[ 0.969768] TCP cubic registered
[ 0.969773] NET: Registered protocol family 1
[ 0.969788] Starting balanced_irq
[ 0.969792] Using IPI No-Shortcut mode
[ 0.969858] ACPI: (supports S0 S1 S4 S5)
[ 0.969887] Magic number: 7:680:485
[ 0.970033] Freeing unused kernel memory: 328k freed
[ 0.973495] Time: tsc clocksource has been installed.
[ 2.097005] Capability LSM initialized
[ 2.119852] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 2.119857] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 2.339158] usbcore: registered new interface driver usbfs
[ 2.339173] usbcore: registered new interface driver hub
[ 2.356340] SCSI subsystem initialized
[ 2.359266] libata version 2.20 loaded.
[ 2.360051] ata_piix 0000:00:1f.1: version 2.10ac1
[ 2.360065] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 2.360079] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 2.360102] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000140b0 irq 14
[ 2.360124] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000140b8 irq 15
[ 2.360138] scsi0 : ata_piix
[ 2.360263] usbcore: registered new device driver usb
[ 2.364304] USB Universal Host Controller Interface driver v3.0
[ 2.386442] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
[ 2.386444] Copyright (c) 1999-2006 Intel Corporation.
[ 2.405373] ieee1394: Initialized config rom entry `ip1394'
[ 2.677588] ata1.00: ATAPI, max UDMA/66
[ 2.842551] ata1.00: configured for UDMA/66
[ 2.842570] scsi1 : ata_piix
[ 2.842613] ata2: port disabled. ignoring.
[ 2.843269] scsi 0:0:0:0: CD-ROM PLEXTOR DVDR PX-716A 1.10 PQ: 0 ANSI: 5
[ 2.844863] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 2.844873] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.844875] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.844960] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.844983] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00004080
[ 2.845056] usb usb1: configuration #1 chosen from 1 choice
[ 2.845071] hub 1-0:1.0: USB hub found
[ 2.845075] hub 1-0:1.0: 2 ports detected
[ 2.851818] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 2.851822] Uniform CD-ROM driver Revision: 3.20
[ 2.851863] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.854450] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.951310] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[ 2.951320] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.951323] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.951347] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.951375] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00004060
[ 2.951463] usb usb2: configuration #1 chosen from 1 choice
[ 2.951478] hub 2-0:1.0: USB hub found
[ 2.951482] hub 2-0:1.0: 2 ports detected
[ 3.055869] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.055876] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.055879] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.055901] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.055924] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 3.056000] usb usb3: configuration #1 chosen from 1 choice
[ 3.056023] hub 3-0:1.0: USB hub found
[ 3.056028] hub 3-0:1.0: 2 ports detected
[ 3.156116] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 3.156122] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.156135] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.156150] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.156170] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[ 3.156220] usb usb4: configuration #1 chosen from 1 choice
[ 3.156234] hub 4-0:1.0: USB hub found
[ 3.156237] hub 4-0:1.0: 2 ports detected
[ 3.188160] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 3.260813] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 3.260825] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.260828] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.260850] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.260877] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.260883] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.260887] ehci_hcd 0000:00:1d.7: irq 19, io mem 0x93404400
[ 3.264751] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.264792] usb usb5: configuration #1 chosen from 1 choice
[ 3.264810] hub 5-0:1.0: USB hub found
[ 3.264814] hub 5-0:1.0: 8 ports detected
[ 3.369374] ahci 0000:00:1f.2: version 2.1
[ 3.369403] ACPI: PCI Interrupt 0000:04:00.0[A] -> <6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
[ 3.369411] GSI 17 (level, low) -> IRQ 17
[ 3.369421] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 3.428133] e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:39:a0:49
[ 3.490284] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 3.718920] usb 1-1: device not accepting address 2, error -71
[ 4.370804] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.370810] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
[ 4.370814] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
[ 4.370873] ata3: SATA max UDMA/133 cmd 0xf88fc100 ctl 0x00000000 bmdma 0x00000000 irq 20
[ 4.370927] ata4: SATA max UDMA/133 cmd 0xf88fc180 ctl 0x00000000 bmdma 0x00000000 irq 20
[ 4.370978] ata5: SATA max UDMA/133 cmd 0xf88fc200 ctl 0x00000000 bmdma 0x00000000 irq 20
[ 4.371040] ata6: SATA max UDMA/133 cmd 0xf88fc280 ctl 0x00000000 bmdma 0x00000000 irq 20
[ 4.371044] scsi2 : ahci
[ 4.447360] usb 1-1: new full speed USB device using uhci_hcd and address 4
[ 4.621485] usb 1-1: configuration #1 chosen from 1 choice
[ 4.627439] hub 1-1:1.0: USB hub found
[ 4.629411] hub 1-1:1.0: 2 ports detected
[ 4.858140] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.858994] ata3.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 4.858999] ata3.00: ATA-7: Hitachi HDT725025VLA380, V5DOA52A, max UDMA/133
[ 4.859002] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.860029] ata3.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 4.860032] ata3.00: configured for UDMA/133
[ 4.860038] scsi3 : ahci
[ 4.956570] usb 1-1.1: new low speed USB device using uhci_hcd and address 5
[ 5.107233] usb 1-1.1: configuration #1 chosen from 1 choice
[ 5.116305] usbcore: registered new interface driver hiddev
[ 5.136177] input: Logitech USB Receiver as /class/input/input2
[ 5.136186] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.1
[ 5.168098] input: Logitech USB Receiver as /class/input/input3
[ 5.168148] input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1
[ 5.168158] usbcore: registered new interface driver usbhid
[ 5.168161] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 5.345640] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.346508] ata4.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 5.346511] ata4.00: ATA-7: Hitachi HDT725025VLA380, V5DOA52A, max UDMA/133
[ 5.346512] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 5.347537] ata4.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 5.347541] ata4.00: configured for UDMA/133
[ 5.347547] scsi4 : ahci
[ 5.832333] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.832955] ata5.00: ata_hpa_resize 1: sectors = 160836480, hpa_sectors = 160836480
[ 5.832959] ata5.00: ATA-7: HDS728080PLA380, PF2OA6EA, max UDMA/133
[ 5.832961] ata5.00: 160836480 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 5.833718] ata5.00: ata_hpa_resize 1: sectors = 160836480, hpa_sectors = 160836480
[ 5.833722] ata5.00: configured for UDMA/133
[ 5.833727] scsi5 : ahci
[ 6.145701] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.145790] scsi 2:0:0:0: Direct-Access ATA Hitachi HDT72502 V5DO PQ: 0 ANSI: 5
[ 6.146049] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 6.146138] scsi 3:0:0:0: Direct-Access ATA Hitachi HDT72502 V5DO PQ: 0 ANSI: 5
[ 6.146325] scsi 3:0:0:0: Attached scsi generic sg2 type 0
[ 6.146402] scsi 4:0:0:0: Direct-Access ATA HDS728080PLA380 PF2O PQ: 0 ANSI: 5
[ 6.146589] scsi 4:0:0:0: Attached scsi generic sg3 type 0
[ 6.146737] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 6.196474] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[93004000-930047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.196579] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 6.196593] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 6.196684] ata7: PATA max UDMA/100 cmd 0x00012018 ctl 0x00012026 bmdma 0x00012000 irq 16
[ 6.196707] ata8: PATA max UDMA/133 cmd 0x00012010 ctl 0x00012022 bmdma 0x00012008 irq 16
[ 6.196715] scsi6 : pata_marvell
[ 6.196766] BAR5:00:04 01:7F 02:22 03:C8 04:02 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:1F 0D:00 0E:00 0F:00
[ 6.197767] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 6.197774] sda: Write Protect is off
[ 6.197776] sda: Mode Sense: 00 3a 00 00
[ 6.197785] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.197815] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 6.197820] sda: Write Protect is off
[ 6.197821] sda: Mode Sense: 00 3a 00 00
[ 6.197830] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.197832] sda: sda1
[ 6.207029] sd 2:0:0:0: Attached scsi disk sda
[ 6.207071] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
[ 6.207081] sdb: Write Protect is off
[ 6.207083] sdb: Mode Sense: 00 3a 00 00
[ 6.207098] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.207135] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
[ 6.207144] sdb: Write Protect is off
[ 6.207146] sdb: Mode Sense: 00 3a 00 00
[ 6.207161] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.207164] sdb: sdb1
[ 6.219910] sd 3:0:0:0: Attached scsi disk sdb
[ 6.219950] SCSI device sdc: 160836480 512-byte hdwr sectors (82348 MB)
[ 6.219959] sdc: Write Protect is off
[ 6.219961] sdc: Mode Sense: 00 3a 00 00
[ 6.219975] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.220015] SCSI device sdc: 160836480 512-byte hdwr sectors (82348 MB)
[ 6.220024] sdc: Write Protect is off
[ 6.220026] sdc: Mode Sense: 00 3a 00 00
[ 6.220040] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.220043] sdc: sdc1 sdc2 < sdc5 >
[ 6.261925] sd 4:0:0:0: Attached scsi disk sdc
[ 6.366616] ATA: abnormal status 0x8 on port 0x0001201f
[ 6.366628] scsi7 : pata_marvell
[ 6.366682] BAR5:00:04 01:7F 02:22 03:C8 04:02 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:1F 0D:00 0E:00 0F:00
[ 7.464952] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001be7105]
[ 36.058366] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: <email address hidden>
[ 36.204894] Attempting manual resume
[ 36.204896] swsusp: Resume From Partition 8:37
[ 36.204897] PM: Checking swsusp image.
[ 36.205013] PM: Resume from disk failed.
[ 36.244710] kjournald starting. Commit interval 5 seconds
[ 36.244715] EXT3-fs: mounted filesystem with ordered data mode.
[ 41.899219] e1000: eth0: e1000_request_irq: Unable to allocate MSI interrupt Error: -22
[ 41.907680] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
[ 41.907682] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[ 42.491457] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 42.516430] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 42.706721] input: PC Speaker as /class/input/input4
[ 42.711880] parport: PnPBIOS parport detected.
[ 42.711931] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 42.853850] Linux video capture interface: v2.00
[ 42.896124] saa7146: register extension 'dvb'.
[ 42.896157] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 42.896175] saa7146: found saa7146 @ mem f8a3c800 (revision 1, irq 21) (0x13c2,0x0003).
[ 42.937500] cx2388x v4l2 driver version 0.0.6 loaded
[ 42.961966] cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
[ 42.982769] DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
[ 42.989619] cx2388x alsa driver version 0.0.6 loaded
[ 43.021772] adapter has MAC addr = 00:d0:5c:22:8d:3d
[ 43.081276] NET: Registered protocol family 17
[ 43.234820] dvb-ttpci: gpioirq unknown type=0 len=0
[ 43.265475] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
[ 43.265478] dvb-ttpci: firmware @ card 0 supports CI link layer interface
[ 43.297762] dvb-ttpci: Crystal audio DAC @ card 0 detected
[ 43.298792] saa7146_vv: saa7146 (0): registered device video0 [v4l2]
[ 43.298816] saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
[ 43.623825] DVB: registering frontend 0 (ST STV0299 DVB-S)...
[ 43.623933] input: DVB on-card IR receiver as /class/input/input5
[ 43.623961] dvb-ttpci: found av7110-0.
[ 43.624042] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 43.624065] CORE cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected]
[ 43.624067] TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
[ 43.789083] tveeprom 1-0050: Hauppauge model 96019, rev C6A0, serial# 544611
[ 43.789085] tveeprom 1-0050: MAC address is 00-0D-FE-08-4F-63
[ 43.789087] tveeprom 1-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
[ 43.789089] tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 43.789091] tveeprom 1-0050: audio processor is CX882 (idx 33)
[ 43.789092] tveeprom 1-0050: decoder processor is CX882 (idx 25)
[ 43.789094] tveeprom 1-0050: has radio, has IR receiver, has IR transmitter
[ 43.789095] cx88[0]: hauppauge eeprom: model=96019
[ 43.789142] input: cx88 IR (Hauppauge WinTV-HVR130 as /class/input/input6
[ 43.789172] cx88[0]/0: found at 0000:05:02.0, rev: 5, irq: 18, latency: 32, mmio: 0x92000000
[ 43.808221] tuner 1-0061: chip found @ 0xc2 (cx88[0])
[ 43.811250] tuner 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 43.814261] tuner 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 43.815450] tuner 1-0063: chip found @ 0xc6 (cx88[0])
[ 43.836000] wm8775 1-001b: chip found @ 0x36 (cx88[0])
[ 43.844135] cx88[0]/0: registered device video1 [v4l2]
[ 43.844155] cx88[0]/0: registered device vbi1
[ 43.844174] cx88[0]/0: registered device radio0
[ 43.845349] cx88[0]/2: cx2388x 8802 Driver Manager
[ 43.845363] ACPI: PCI Interrupt 0000:05:02.2[A] -> GSI 18 (level, low) -> IRQ 18
[ 43.845370] cx88[0]/2: found at 0000:05:02.2, rev: 5, irq: 18, latency: 32, mmio: 0x90000000
[ 43.845621] ACPI: PCI Interrupt 0000:05:02.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 43.845636] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 43.845854] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 43.845867] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 44.575907] fuse init (API version 7.8)
[ 44.595936] lp0: using parport0 (interrupt-driven).
[ 44.623125] Adding 3317380k swap on /dev/disk/by-uuid/ca044230-333a-4af7-befe-3b309a9ed53c. Priority:-1 extents:1 across:3317380k
[ 44.711253] EXT3 FS on sdc1, internal journal
[ 45.043047] NET: Registered protocol family 10
[ 45.043105] lo: Disabled Privacy Extensions
[ 50.594873] ibm_acpi: ec object not found
[ 50.660414] input: Power Button (FF) as /class/input/input7
[ 50.660431] ACPI: Power Button (FF) [PWRF]
[ 50.660454] input: Sleep Button (CM) as /class/input/input8
[ 50.660467] ACPI: Sleep Button (CM) [SLPB]
[ 50.689323] Using specific hotkey driver
[ 50.744133] No dock devices found.
[ 50.773513] pcc_acpi: loading...
[ 55.171825] eth0: no IPv6 routers present
[ 55.262237] ppdev: user-space parallel port driver
[ 55.738654] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 55.738656] apm: disabled - APM is not SMP safe.
[ 56.149262] Installing knfsd (copyright (C) 1996 <email address hidden>).
[ 56.211023] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 56.211446] NFSD: starting 90-second grace period
[ 73.044341] eth0: no IPv6 routers present
[ 83.935558] Bluetooth: Core ver 2.11
[ 83.935608] NET: Registered protocol family 31
[ 83.935610] Bluetooth: HCI device and connection manager initialized
[ 83.935614] Bluetooth: HCI socket layer initialized

sudo lshw
d975xbx2
    description: Computer
    width: 32 bits
    capabilities: smbios-2.4 dmi-2.4
    configuration: boot=normal uuid=E6463404-9FFA-11DB-A630-000EA62CA248
  *-core
       description: Motherboard
       product: D975XBX2
       vendor: Intel Corporation
       physical id: 0
       version: AAD53350-505
       serial: BQB2702000GZ
       slot: Base Board Chassis Location
     *-cpu
          description: CPU
          product: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz
          vendor: Intel Corp.
          physical id: 0
          bus info: cpu@0
          version: 6.15.6
          serial: 0000-06F6-0000-0000-0000-0000
          slot: J3E1
          size: 1596MHz
          capacity: 4GHz
          width: 64 bits
          clock: 266MHz
          capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx x86-64 constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm cpufreq
          configuration: id=0
        *-cache:0
             description: L2 cache
             physical id: 1
             slot: Unknown
             size: 4MB
             capacity: 4MB
             capabilities: asynchronous internal write-back unified
        *-cache:1
             description: L1 cache
             physical id: 3
             slot: Unknown
             size: 32KB
             capacity: 32KB
             capabilities: asynchronous internal write-back data
        *-logicalcpu:0
             description: Logical CPU
             physical id: 0.1
             width: 64 bits
             capabilities: logical
        *-logicalcpu:1
             description: Logical CPU
             physical id: 0.2
             width: 64 bits
             capabilities: logical
     *-cache
          description: L1 cache
          physical id: 2
          slot: Unknown
          size: 32KB
          capacity: 32KB
          capabilities: asynchronous internal write-back instruction
     *-firmware
          description: BIOS
          vendor: Intel Corp.
          physical id: 4
          version: BX97520J.86A.2692.2007.0403.1844 (04/03/2007)
          size: 64KB
          capacity: 960KB
          capabilities: pci upgrade shadowing cdboot bootselect edd int9keyboard int14serial int17printer int10video acpi usb zipboot biosbootspecification netboot
     *-memory
          description: System Memory
          physical id: 17
          slot: System board or motherboard
          size: 2GB
        *-bank:0
             description: DIMM Synchronous 667 MHz (1.5 ns)
             product: 0x000000000000000000000000000000000000
             vendor: 0x7F98000000000000
             physical id: 0
             serial: 0x651ACE4A
             slot: J6H1
             size: 1GB
             width: 64 bits
             clock: 667MHz (1.5ns)
        *-bank:1
             description: DIMM [empty]
             product: NO DIMM
             vendor: NO DIMM
             physical id: 1
             serial: NO DIMM
             slot: J6H2
        *-bank:2
             description: DIMM Synchronous 667 MHz (1.5 ns)
             product: 0x000000000000000000000000000000000000
             vendor: 0x7F98000000000000
             physical id: 2
             serial: 0x681A8354
             slot: J6J1
             size: 1GB
             width: 64 bits
             clock: 667MHz (1.5ns)
        *-bank:3
             description: DIMM [empty]
             product: NO DIMM
             vendor: NO DIMM
             physical id: 3
             serial: NO DIMM
             slot: J6J2
     *-pci
          description: Host bridge
          product: 82975X Memory Controller Hub
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@00:00.0
          version: 00
          width: 32 bits
          clock: 33MHz
        *-pci:0
             description: PCI bridge
             product: 82975X PCI Express Root Port
             vendor: Intel Corporation
             physical id: 1
             bus info: pci@00:01.0
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
           *-display:0
                description: VGA compatible controller
                product: ATI Technologies Inc
                vendor: ATI Technologies Inc
                physical id: 0
                bus info: pci@01:00.0
                version: 9a
                size: 256MB
                width: 64 bits
                clock: 33MHz
                capabilities: vga bus_master cap_list
                configuration: latency=0
                resources: iomemory:80000000-8fffffff iomemory:93300000-9330ffff ioport:3000-30ff irq:11
           *-display:1 UNCLAIMED
                description: Display controller
                product: ATI Technologies Inc
                vendor: ATI Technologies Inc
                physical id: 0.1
                bus info: pci@01:00.1
                version: 9a
                size: 64KB
                width: 64 bits
                clock: 33MHz
                capabilities: bus_master cap_list
                configuration: latency=0
                resources: iomemory:93310000-9331ffff
        *-multimedia
             description: Audio device
             product: 82801G (ICH7 Family) High Definition Audio Controller
             vendor: Intel Corporation
             physical id: 1b
             bus info: pci@00:1b.0
             version: 01
             width: 64 bits
             clock: 33MHz
             capabilities: bus_master cap_list
             configuration: driver=HDA Intel latency=0
             resources: iomemory:93400000-93403fff irq:22
        *-pci:1
             description: PCI bridge
             product: 82801G (ICH7 Family) PCI Express Port 1
             vendor: Intel Corporation
             physical id: 1c
             bus info: pci@00:1c.0
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
        *-pci:2
             description: PCI bridge
             product: 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5
             vendor: Intel Corporation
             physical id: 1c.4
             bus info: pci@00:1c.4
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
           *-storage
                description: SATA controller
                product: Marvell Technology Group Ltd.
                vendor: Marvell Technology Group Ltd.
                physical id: 0
                bus info: pci@03:00.0
                logical name: scsi6
                logical name: scsi7
                version: a1
                width: 32 bits
                clock: 33MHz
                capabilities: storage bus_master cap_list scsi-host
                configuration: driver=pata_marvell latency=0 mingnt=8
                resources: ioport:2018-201f ioport:2024-2027 ioport:2010-2017 ioport:2020-2023 ioport:2000-200f iomemory:93200000-932003ff irq:16
        *-pci:3
             description: PCI bridge
             product: 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6
             vendor: Intel Corporation
             physical id: 1c.5
             bus info: pci@00:1c.5
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master cap_list
             configuration: driver=pcieport-driver
           *-network
                description: Ethernet interface
                product: 82573L Gigabit Ethernet Controller
                vendor: Intel Corporation
                physical id: 0
                bus info: pci@04:00.0
                logical name: eth0
                version: 00
                serial: 00:19:d1:39:a0:49
                size: 100MB/s
                capacity: 1GB/s
                width: 32 bits
                clock: 33MHz
                capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.15-k2-NAPI duplex=full firmware=0.5-7 ip=192.168.0.4 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s
                resources: iomemory:93100000-9311ffff ioport:1000-101f irq:17
        *-usb:0
             description: USB Controller
             product: 82801G (ICH7 Family) USB UHCI #1
             vendor: Intel Corporation
             physical id: 1d
             bus info: pci@00:1d.0
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0
             resources: ioport:4080-409f irq:19
           *-usbhost
                product: UHCI Host Controller
                vendor: Linux 2.6.20-15-generic uhci_hcd
                physical id: 1
                bus info: usb@1
                logical name: usb1
                version: 2.06
                capabilities: usb-1.10
                configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
              *-usb
                   description: USB hub
                   product: General Purpose USB Hub
                   physical id: 1
                   bus info: usb@1:1
                   version: 1.01
                   capabilities: usb-1.10
                   configuration: driver=hub maxpower=100mA slots=2 speed=12.0MB/s
                 *-usb
                      description: Keyboard
                      product: USB Receiver
                      vendor: Logitech
                      physical id: 1
                      bus info: usb@1:1.1
                      version: 24.20
                      serial: 1FAD50
                      capabilities: usb-1.10
                      configuration: driver=usbhid maxpower=98mA speed=1.5MB/s
        *-usb:1
             description: USB Controller
             product: 82801G (ICH7 Family) USB UHCI #2
             vendor: Intel Corporation
             physical id: 1d.1
             bus info: pci@00:1d.1
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0
             resources: ioport:4060-407f irq:20
           *-usbhost
                product: UHCI Host Controller
                vendor: Linux 2.6.20-15-generic uhci_hcd
                physical id: 1
                bus info: usb@2
                logical name: usb2
                version: 2.06
                capabilities: usb-1.10
                configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
        *-usb:2
             description: USB Controller
             product: 82801G (ICH7 Family) USB UHCI #3
             vendor: Intel Corporation
             physical id: 1d.2
             bus info: pci@00:1d.2
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0
             resources: ioport:4040-405f irq:18
           *-usbhost
                product: UHCI Host Controller
                vendor: Linux 2.6.20-15-generic uhci_hcd
                physical id: 1
                bus info: usb@3
                logical name: usb3
                version: 2.06
                capabilities: usb-1.10
                configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
        *-usb:3
             description: USB Controller
             product: 82801G (ICH7 Family) USB UHCI #4
             vendor: Intel Corporation
             physical id: 1d.3
             bus info: pci@00:1d.3
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0
             resources: ioport:4020-403f irq:16
           *-usbhost
                product: UHCI Host Controller
                vendor: Linux 2.6.20-15-generic uhci_hcd
                physical id: 1
                bus info: usb@4
                logical name: usb4
                version: 2.06
                capabilities: usb-1.10
                configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
        *-usb:4
             description: USB Controller
             product: 82801G (ICH7 Family) USB2 EHCI Controller
             vendor: Intel Corporation
             physical id: 1d.7
             bus info: pci@00:1d.7
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: ehci bus_master cap_list
             configuration: driver=ehci_hcd latency=0
             resources: iomemory:93404400-934047ff irq:19
           *-usbhost
                product: EHCI Host Controller
                vendor: Linux 2.6.20-15-generic ehci_hcd
                physical id: 1
                bus info: usb@5
                logical name: usb5
                version: 2.06
                capabilities: usb-2.00
                configuration: driver=hub maxpower=0mA slots=8 speed=480.0MB/s
        *-pci:4
             description: PCI bridge
             product: 82801 PCI Bridge
             vendor: Intel Corporation
             physical id: 1e
             bus info: pci@00:1e.0
             version: e1
             width: 32 bits
             clock: 33MHz
             capabilities: pci subtractive_decode bus_master cap_list
           *-multimedia:0
                description: Multimedia controller
                product: SAA7146
                vendor: Philips Semiconductors
                physical id: 0
                bus info: pci@05:00.0
                version: 01
                width: 32 bits
                clock: 33MHz
                capabilities: bus_master
                configuration: driver=dvb latency=32 maxlatency=38 mingnt=15
                resources: iomemory:93004800-930049ff irq:21
           *-multimedia:1
                description: Multimedia video controller
                product: CX23880/1/2/3 PCI Video and Audio Decoder
                vendor: Conexant
                physical id: 2
                bus info: pci@05:02.0
                version: 05
                width: 32 bits
                clock: 33MHz
                capabilities: bus_master cap_list
                configuration: driver=cx8800 latency=32 maxlatency=55 mingnt=20
                resources: iomemory:92000000-92ffffff irq:18
           *-multimedia:2
                description: Multimedia controller
                product: CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port]
                vendor: Conexant
                physical id: 2.1
                bus info: pci@05:02.1
                version: 05
                width: 32 bits
                clock: 33MHz
                capabilities: bus_master cap_list
                configuration: driver=cx88_audio latency=32 maxlatency=255 mingnt=4
                resources: iomemory:91000000-91ffffff irq:18
           *-multimedia:3
                description: Multimedia controller
                product: CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port]
                vendor: Conexant
                physical id: 2.2
                bus info: pci@05:02.2
                version: 05
                width: 32 bits
                clock: 33MHz
                capabilities: bus_master cap_list
                configuration: driver=cx88-mpeg driver manager latency=32 maxlatency=88 mingnt=6
                resources: iomemory:90000000-90ffffff irq:18
           *-firewire
                description: FireWire (IEEE 1394)
                product: TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
                vendor: Texas Instruments
                physical id: 4
                bus info: pci@05:04.0
                version: 00
                width: 32 bits
                clock: 33MHz
                capabilities: ohci bus_master cap_list
                configuration: driver=ohci1394 latency=32 maxlatency=4 mingnt=2
                resources: iomemory:93004000-930047ff iomemory:93000000-93003fff irq:18
        *-isa
             description: ISA bridge
             product: 82801GH (ICH7DH) LPC Interface Bridge
             vendor: Intel Corporation
             physical id: 1f
             bus info: pci@00:1f.0
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master cap_list
             configuration: latency=0
        *-ide
             description: IDE interface
             product: 82801G (ICH7 Family) IDE Controller
             vendor: Intel Corporation
             physical id: 1f.1
             bus info: pci@00:1f.1
             logical name: scsi0
             logical name: scsi1
             version: 01
             width: 32 bits
             clock: 33MHz
             capabilities: ide bus_master emulated scsi-host
             configuration: driver=ata_piix latency=0
             resources: ioport:1f0-1f7 ioport:3f4-3f3 ioport:170-177 ioport:374-373 ioport:40b0-40bf irq:18
           *-cdrom
                description: DVD writer
                product: DVDR PX-716A
                vendor: PLEXTOR
                physical id: 0.0.0
                bus info: scsi@0:0.0.0
                logical name: /dev/cdrom
                logical name: /dev/dvd
                logical name: /dev/scd0
                logical name: /dev/sr0
                version: 1.10
                capabilities: removable audio cd-r cd-rw dvd dvd-r
                configuration: ansiversion=5
              *-disc
                   physical id: 0
                   logical name: /dev/cdrom
        *-storage
             description: RAID bus controller
             product: 82801GR/GH (ICH7 Family) Serial ATA Storage Controller RAID
             vendor: Intel Corporation
             physical id: 1f.2
             bus info: pci@00:1f.2
             logical name: scsi2
             logical name: scsi3
             logical name: scsi4
             logical name: scsi5
             version: 01
             width: 32 bits
             clock: 66MHz
             capabilities: storage bus_master cap_list emulated scsi-host
             configuration: driver=ahci latency=0
             resources: ioport:40c8-40cf ioport:40e4-40e7 ioport:40c0-40c7 ioport:40e0-40e3 ioport:40a0-40af iomemory:93404000-934043ff irq:20
           *-disk:0
                description: SCSI Disk
                product: Hitachi HDT72502
                vendor: ATA
                physical id: 0
                bus info: scsi@2:0.0.0
                logical name: /dev/sda
                version: V5DO
                serial: VFA100R10XVJDK
                size: 232GB
                capabilities: partitioned partitioned:dos
                configuration: ansiversion=5
              *-volume
                   description: HPFS/NTFS partition
                   physical id: 1
                   bus info: scsi@2:0.0.0,1
                   logical name: /dev/sda1
                   capacity: 232GB
                   capabilities: primary bootable
           *-disk:1
                description: SCSI Disk
                product: Hitachi HDT72502
                vendor: ATA
                physical id: 1
                bus info: scsi@3:0.0.0
                logical name: /dev/sdb
                version: V5DO
                serial: VFA100R10KUWEK
                size: 232GB
                capabilities: partitioned partitioned:dos
                configuration: ansiversion=5
              *-volume
                   description: HPFS/NTFS partition
                   physical id: 1
                   bus info: scsi@3:0.0.0,1
                   logical name: /dev/sdb1
                   capacity: 232GB
                   capabilities: primary bootable
           *-disk:2
                description: SCSI Disk
                product: HDS728080PLA380
                vendor: ATA
                physical id: 0.0.0
                bus info: scsi@4:0.0.0
                logical name: /dev/sdc
                version: PF2O
                serial: PFDHW3EJUWUM4H
                size: 76GB
                capabilities: partitioned partitioned:dos
                configuration: ansiversion=5
              *-volume:0
                   description: Linux filesystem partition
                   physical id: 1
                   bus info: scsi@4:0.0.0,1
                   logical name: /dev/sdc1
                   capacity: 73GB
                   capabilities: primary bootable
              *-volume:1
                   description: Extended partition
                   physical id: 2
                   bus info: scsi@4:0.0.0,2
                   logical name: /dev/sdc2
                   size: 3239MB
                   capacity: 3239MB
                   capabilities: primary extended partitioned partitioned:extended
                 *-logicalvolume
                      description: Linux swap / Solaris partition
                      physical id: 5
                      logical name: /dev/sdc5
                      capacity: 3239MB
                      capabilities: nofs
        *-serial UNCLAIMED
             description: SMBus
             product: 82801G (ICH7 Family) SMBus Controller
             vendor: Intel Corporation
             physical id: 1f.3
             bus info: pci@00:1f.3
             version: 01
             width: 32 bits
             clock: 33MHz
             configuration: latency=0
             resources: ioport:4000-401f irq:9

Revision history for this message
Edwin Fine (efine145-nospam01) said : 		#5

Many people have this exact problem. I believe that the support for the Marvell SATA controller on the 975XBX2 (88SE6145) in libata is highly experimental. I cannot get mine to work either. The Marvell BIOS sees the drives, Linux sees the PCI controller, but the driver doesn't seem to detect it. I compiled the 2.6.22.rc2 kernel to get the latest libata code from Jeff Garzik's git branch, but I am still having no success. In fact, when the kernel loaded, it thought it saw PATA controllers because it loaded the pata_marvell driver and not the sata_mv driver.
I'm not a kernel wizard, though, and I may have fsck'ed something up when I built the kernel. Whatever it is, I am still trying to get it to work. If I do, I will post the solution, but I suspect that we might have to set the BIOS to run all the SATA drives in legacy mode (have not tried that yet). I am not keen on doing that, though, because I will lose the more advanced SATA features that I really want.

Revision history for this message
Ben (ben-j-dover) said : 		#6

Have the identical problem on the 975XBX2 board. The drives were seen in the 9.xx release - I upgraded from there - and the drives disappeared.

I see that this question is listed as answered - and that makes sense - it is not resolved in my opinion. Is there an open bug on this - or does one need to be opened?

Revision history for this message
Ben (ben-j-dover) said : 		#7

As of 2010 09 08 and on 10.04 I have not been able to resolve this problem. It was not a problem with 9.xx. I have done nothing different - and spent far too much time researching the issue with no success. If there is a solution that is doable for a dedicated keyboarder - but not at all technical - I need to see it soon.

Can you help with this problem?

Provide an answer of your own, or ask setelsis for more information if necessary.

To post a message you must log in.