Ubuntu Boot Screen loads very slow from bottom to top-Tri Boot

Asked by Al

I just installed Ubuntu for a tri-boot system. I had Windows 10 x64, then installed Windows 7 x64, then I installed Ubuntu. I've done this in the past successfully, however, this time I had issues installing Ubuntu. I had to hit F5 or F6 when installing and then I had to choose nomodeset (See link below). Now when Linux Boot Screen loads, it loads very slowly (like not enough ram) and from bottom of monitor to the top. This can take up to 30 seconds or so. I never noticed this on other installs, only this one.
My system specs are as follows:
Asus Rampage II Extreme MOBO
Intel i7 920
12 GB of RAM
Nvidia 970GTX Video card
Samsung Evo 840 Pro 1TB (Roughly Partitioned+ 600gb windows 10, 350gb Windows 7 and 50GB Ubuntu. give or take a few.)

I followed this link to install, as I had this exact issue when installing Ubuntu: https://askubuntu.com/questions/9478...-from-live-usb

Thanks in advance!

PS: I'm kinda new to Ubuntu so be gentile when asking specific questions...(give directions)

Question information

Language:
English Edit question
Status:
Expired
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
actionparsnip (andrew-woodhead666) said :
#1

Once you get logged in. Run:

dmesg > /tmp/output.txt; gedit /tmp/output.txt

What is the output please?

Revision history for this message
Al (homeuser66) said :
#2

Thanks for trying to help me here. I tried another video card (a lower end model and it booted normal and quick)

Here is the output:

[ 0.000000] Linux version 4.10.0-28-generic (buildd@lgw01-12) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #32~16.04.2-Ubuntu SMP Thu Jul 20 10:19:48 UTC 2017 (Ubuntu 4.10.0-28.32~16.04.2-generic 4.10.17)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-28-generic root=UUID=905173ac-7224-402e-b483-402c57ef90ad ro nomodeset quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7dbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7dc000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000033fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/Rampage II Extreme, BIOS 2101 09/19/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F00000000 write-back
[ 0.000000] 2 base 300000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] total RAM covered: 12280M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 6 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff9f30000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff9f3000098000] 98000 size 24576
[ 0.000000] BRK [0x27e828000, 0x27e828fff] PGTABLE
[ 0.000000] BRK [0x27e829000, 0x27e829fff] PGTABLE
[ 0.000000] BRK [0x27e82a000, 0x27e82afff] PGTABLE
[ 0.000000] BRK [0x27e82b000, 0x27e82bfff] PGTABLE
[ 0.000000] BRK [0x27e82c000, 0x27e82cfff] PGTABLE
[ 0.000000] BRK [0x27e82d000, 0x27e82dfff] PGTABLE
[ 0.000000] BRK [0x27e82e000, 0x27e82efff] PGTABLE
[ 0.000000] BRK [0x27e82f000, 0x27e82ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x321ac000-0x350cdfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FB240 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x00000000BF780100 00005C (v01 091911 XSDT1447 20110919 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000BF780290 0000F4 (v03 091911 FACP1447 20110919 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000BF7804B0 00D43A (v01 A1088 A1088000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 0x00000000BF798000 000040
[ 0.000000] ACPI: FACS 0x00000000BF798000 000040
[ 0.000000] ACPI: APIC 0x00000000BF780390 0000D8 (v01 091911 APIC1447 20110919 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000BF780470 00003C (v01 091911 OEMMCFG 20110919 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000BF798040 000072 (v01 091911 OEMB1447 20110919 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BF78F4B0 000038 (v01 091911 OEMHPET 20110919 MSFT 00000097)
[ 0.000000] ACPI: OSFR 0x00000000BF78F4F0 0000B0 (v01 091911 OEMOSFR 20110919 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000BF799CD0 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000033fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x33ffcd000-0x33fff7fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000033fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf77ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000033fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000033fffffff]
[ 0.000000] On node 0 totalpages: 3143453
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12190 pages used for memmap
[ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
[ 0.000000] Normal zone: 36864 pages used for memmap
[ 0.000000] Normal zone: 2359296 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf798000-0xbf7dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7dc000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff9f3333200000 s107992 r8192 d31272 u262144
[ 0.000000] pcpu-alloc: s107992 r8192 d31272 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3094314
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-28-generic root=UUID=905173ac-7224-402e-b483-402c57ef90ad ro nomodeset quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 12239648K/12573812K available (9060K kernel code, 1666K rwdata, 3824K rodata, 2228K init, 2364K bss, 334164K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16
[ 0.000000] NR_IRQS:524544 nr_irqs:960 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 2670.089 MHz processor
[ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 5340.17 BogoMIPS (lpj=10680356)
[ 0.000031] pid_max: default: 32768 minimum: 301
[ 0.000050] ACPI: Core revision 20160930
[ 0.008843] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.008881] Security Framework initialized
[ 0.008882] Yama: becoming mindful.
[ 0.008907] AppArmor: AppArmor initialized
[ 0.009969] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.013867] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.015280] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.015298] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.015638] CPU: Physical Processor ID: 0
[ 0.015639] CPU: Processor Core ID: 0
[ 0.015643] mce: CPU supports 9 MCE banks
[ 0.015650] CPU0: Thermal monitoring enabled (TM1)
[ 0.015662] process: using mwait in idle threads
[ 0.015666] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.015666] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.015816] Freeing SMP alternatives memory: 32K
[ 0.042861] ftrace: allocating 34206 entries in 134 pages
[ 0.061998] smpboot: Max logical packages: 4
[ 0.062004] DMAR-IR: This system BIOS has enabled interrupt remapping
               on a chipset that contains an erratum making that
               feature unstable. To maintain system stability
               interrupt remapping is being disabled. Please
               contact your BIOS vendor for an update
[ 0.062006] Switched APIC routing to physical flat.
[ 0.062554] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.209742] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (family: 0x6, model: 0x1a, stepping: 0x4)
[ 0.209805] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver.
[ 0.209822] core: CPU erratum AAJ80 worked around
[ 0.209825] ... version: 3
[ 0.209825] ... bit width: 48
[ 0.209826] ... generic registers: 4
[ 0.209826] ... value mask: 0000ffffffffffff
[ 0.209827] ... max period: 000000007fffffff
[ 0.209827] ... fixed-purpose events: 3
[ 0.209828] ... event mask: 000000070000000f
[ 0.210964] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.210988] smp: Bringing up secondary CPUs ...
[ 0.211085] x86: Booting SMP configuration:
[ 0.211085] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.228325] smp: Brought up 1 node, 8 CPUs
[ 0.228327] smpboot: Total of 8 processors activated (42721.42 BogoMIPS)
[ 0.234785] devtmpfs: initialized
[ 0.234840] x86/mm: Memory block size: 128MB
[ 0.237837] evm: security.selinux
[ 0.237837] evm: security.SMACK64
[ 0.237838] evm: security.SMACK64EXEC
[ 0.237838] evm: security.SMACK64TRANSMUTE
[ 0.237838] evm: security.SMACK64MMAP
[ 0.237839] evm: security.ima
[ 0.237839] evm: security.capability
[ 0.237913] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7dbfff] (278528 bytes)
[ 0.237978] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.237998] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.238064] pinctrl core: initialized pinctrl subsystem
[ 0.238169] RTC time: 13:21:37, date: 02/26/18
[ 0.238257] NET: Registered protocol family 16
[ 0.253752] cpuidle: using governor ladder
[ 0.269746] cpuidle: using governor menu
[ 0.269748] PCCT header not found.
[ 0.269829] ACPI: bus type PCI registered
[ 0.269831] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.269909] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.269911] PCI: not using MMCONFIG
[ 0.269912] PCI: Using configuration type 1 for base access
[ 0.285953] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.286213] ACPI: Added _OSI(Module Device)
[ 0.286214] ACPI: Added _OSI(Processor Device)
[ 0.286215] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.286215] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.286412] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.355133] ACPI: Dynamic OEM Table Load:
[ 0.355143] ACPI: SSDT 0xFFFF9F3330DBC000 001C0C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.355751] ACPI: Interpreter enabled
[ 0.355771] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.355772] ACPI: Using IOAPIC for interrupt routing
[ 0.355800] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.356730] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.356748] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.362637] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.362641] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.362645] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.362903] PCI host bridge to bus 0000:00
[ 0.362905] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.362906] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.362907] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.362908] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.362909] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 0.362910] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
[ 0.362911] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.362922] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 0.362977] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.363065] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.363115] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.363170] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.363207] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.363259] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.363316] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.363354] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.363404] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.363457] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.363500] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.363612] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.363722] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.363830] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 0.363935] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.363973] pci 0000:00:1a.0: reg 0x20: [io 0x9800-0x981f]
[ 0.364067] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.364104] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.364141] pci 0000:00:1a.1: reg 0x20: [io 0x9880-0x989f]
[ 0.364231] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.364267] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.364304] pci 0000:00:1a.2: reg 0x20: [io 0x9c00-0x9c1f]
[ 0.364395] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.364437] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.364453] pci 0000:00:1a.7: reg 0x10: [mem 0xf9fff000-0xf9fff3ff]
[ 0.364531] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.364580] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.364619] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.364634] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
[ 0.364700] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.364781] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.364846] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.364900] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.364935] pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
[ 0.365000] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.365052] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.365088] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.365152] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.365205] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.365241] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
[ 0.365306] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.365359] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.365395] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.365432] pci 0000:00:1d.0: reg 0x20: [io 0x9080-0x909f]
[ 0.365522] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.365557] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.365594] pci 0000:00:1d.1: reg 0x20: [io 0x9400-0x941f]
[ 0.365685] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.365722] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.365760] pci 0000:00:1d.2: reg 0x20: [io 0x9480-0x949f]
[ 0.365850] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.365894] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.365911] pci 0000:00:1d.7: reg 0x10: [mem 0xf9ffe000-0xf9ffe3ff]
[ 0.365989] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.366040] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.366074] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.366161] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.366198] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.366270] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.366274] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.366276] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.366378] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[ 0.366391] pci 0000:00:1f.2: reg 0x10: [io 0x8c00-0x8c07]
[ 0.366397] pci 0000:00:1f.2: reg 0x14: [io 0x8880-0x8883]
[ 0.366404] pci 0000:00:1f.2: reg 0x18: [io 0x8800-0x8807]
[ 0.366410] pci 0000:00:1f.2: reg 0x1c: [io 0x8480-0x8483]
[ 0.366417] pci 0000:00:1f.2: reg 0x20: [io 0x8400-0x841f]
[ 0.366423] pci 0000:00:1f.2: reg 0x24: [mem 0xf9ffc000-0xf9ffc7ff]
[ 0.366461] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.366538] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.366552] pci 0000:00:1f.3: reg 0x10: [mem 0xf9ffd000-0xf9ffd0ff 64bit]
[ 0.366570] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.366688] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.366737] pci 0000:02:00.0: [10de:13c2] type 00 class 0x030000
[ 0.366748] pci 0000:02:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.366759] pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.366769] pci 0000:02:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.366775] pci 0000:02:00.0: reg 0x24: [io 0xac00-0xac7f]
[ 0.366782] pci 0000:02:00.0: reg 0x30: [mem 0xfba00000-0xfba7ffff pref]
[ 0.366885] pci 0000:02:00.1: [10de:0fbb] type 00 class 0x040300
[ 0.366896] pci 0000:02:00.1: reg 0x10: [mem 0xfbafc000-0xfbafffff]
[ 0.380009] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 0.380013] pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
[ 0.380016] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbafffff]
[ 0.380021] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.380075] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.380120] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.380128] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.380181] pci 0000:06:00.0: [11ab:4364] type 00 class 0x020000
[ 0.380205] pci 0000:06:00.0: reg 0x10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[ 0.380216] pci 0000:06:00.0: reg 0x18: [io 0xd800-0xd8ff]
[ 0.380255] pci 0000:06:00.0: reg 0x30: [mem 0xfbdc0000-0xfbddffff pref]
[ 0.380318] pci 0000:06:00.0: supports D1 D2
[ 0.380319] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.392008] pci 0000:00:1c.2: PCI bridge to [bus 06]
[ 0.392012] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.392016] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.392112] pci 0000:05:00.0: [197b:2363] type 00 class 0x010185
[ 0.392198] pci 0000:05:00.0: reg 0x24: [mem 0xfbcfe000-0xfbcfffff]
[ 0.392263] pci 0000:05:00.0: PME# supported from D3hot
[ 0.392326] pci 0000:05:00.1: [197b:2363] type 00 class 0x010185
[ 0.392344] pci 0000:05:00.1: reg 0x10: [io 0xcc00-0xcc07]
[ 0.392353] pci 0000:05:00.1: reg 0x14: [io 0xc880-0xc883]
[ 0.392362] pci 0000:05:00.1: reg 0x18: [io 0xc800-0xc807]
[ 0.392371] pci 0000:05:00.1: reg 0x1c: [io 0xc480-0xc483]
[ 0.392380] pci 0000:05:00.1: reg 0x20: [io 0xc400-0xc40f]
[ 0.392482] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.392490] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.392493] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.392495] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.392553] pci 0000:04:00.0: [11ab:4364] type 00 class 0x020000
[ 0.392576] pci 0000:04:00.0: reg 0x10: [mem 0xfbbfc000-0xfbbfffff 64bit]
[ 0.392587] pci 0000:04:00.0: reg 0x18: [io 0xb800-0xb8ff]
[ 0.392627] pci 0000:04:00.0: reg 0x30: [mem 0xfbbc0000-0xfbbdffff pref]
[ 0.392690] pci 0000:04:00.0: supports D1 D2
[ 0.392691] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.404011] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.404015] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 0.404019] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.404076] pci 0000:08:00.0: [1106:3038] type 00 class 0x0c0300
[ 0.404123] pci 0000:08:00.0: reg 0x20: [io 0xe880-0xe89f]
[ 0.404165] pci 0000:08:00.0: supports D1 D2
[ 0.404166] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.404209] pci 0000:08:00.1: [1106:3038] type 00 class 0x0c0300
[ 0.404251] pci 0000:08:00.1: reg 0x20: [io 0xec00-0xec1f]
[ 0.404292] pci 0000:08:00.1: supports D1 D2
[ 0.404293] pci 0000:08:00.1: PME# supported from D0 D1 D2 D3hot
[ 0.404333] pci 0000:08:00.2: [1106:3104] type 00 class 0x0c0320
[ 0.404347] pci 0000:08:00.2: reg 0x10: [mem 0xfbeff000-0xfbeff0ff]
[ 0.404416] pci 0000:08:00.2: supports D1 D2
[ 0.404417] pci 0000:08:00.2: PME# supported from D0 D1 D2 D3hot
[ 0.404466] pci 0000:08:02.0: [1106:3044] type 00 class 0x0c0010
[ 0.404480] pci 0000:08:02.0: reg 0x10: [mem 0xfbefe000-0xfbefe7ff]
[ 0.404489] pci 0000:08:02.0: reg 0x14: [io 0xe800-0xe87f]
[ 0.404554] pci 0000:08:02.0: supports D2
[ 0.404555] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
[ 0.404622] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
[ 0.404625] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.404627] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.404632] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.404633] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.404634] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.404635] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.404636] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[ 0.404637] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
[ 0.405216] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.405262] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.405305] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.405350] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.405395] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.405440] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.405484] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.405529] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 0.405579] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.405879] SCSI subsystem initialized
[ 0.405929] libata version 3.00 loaded.
[ 0.405974] pci 0000:02:00.0: vgaarb: setting as boot VGA device
[ 0.405976] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.405978] pci 0000:02:00.0: vgaarb: bridge control possible
[ 0.405978] vgaarb: loaded
[ 0.405999] ACPI: bus type USB registered
[ 0.406013] usbcore: registered new interface driver usbfs
[ 0.406020] usbcore: registered new interface driver hub
[ 0.406041] usbcore: registered new device driver usb
[ 0.406154] PCI: Using ACPI for IRQ routing
[ 0.411737] PCI: Discovered peer bus ff
[ 0.411737] PCI: root bus ff: using default resources
[ 0.411738] PCI: Probing PCI hardware (bus ff)
[ 0.411764] ACPI: \: failed to evaluate _DSM (0x1001)
[ 0.411765] PCI host bridge to bus 0000:ff
[ 0.411767] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.411768] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.411769] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.411771] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.411775] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[ 0.411816] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[ 0.411857] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[ 0.411894] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[ 0.411933] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[ 0.411970] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[ 0.412011] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.412050] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[ 0.412090] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[ 0.412128] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[ 0.412166] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[ 0.412205] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[ 0.412243] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[ 0.412279] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.412315] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.412354] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[ 0.412392] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[ 0.412429] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[ 0.412466] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[ 0.412513] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.412514] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.412519] PCI: pci_cache_line_size set to 64 bytes
[ 0.412608] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.412609] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[ 0.412698] NetLabel: Initializing
[ 0.412699] NetLabel: domain hash size = 128
[ 0.412699] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.412715] NetLabel: unlabeled traffic allowed by default
[ 0.412810] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.412814] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.412817] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.415079] clocksource: Switched to clocksource hpet
[ 0.422574] VFS: Disk quotas dquot_6.6.0
[ 0.422597] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.422690] AppArmor: AppArmor Filesystem Enabled
[ 0.422737] pnp: PnP ACPI init
[ 0.422826] system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 0.422827] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.422829] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.422830] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.422832] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 0.422833] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[ 0.422837] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.422904] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.423090] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.423092] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423260] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.423262] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.423263] system 00:03: [io 0x0500-0x057f] could not be reserved
[ 0.423265] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.423267] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.423268] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.423270] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423375] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.423378] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423476] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.423478] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.423480] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423556] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.423619] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.423621] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423776] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.423778] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.423779] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.423780] system 00:08: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.423782] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.423784] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.423890] pnp: PnP ACPI: found 9 devices
[ 0.429980] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.430008] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
[ 0.430009] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 400000 add_align 100000
[ 0.430016] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[ 0.430023] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[ 0.430030] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.430043] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 400000 min_align 100000
[ 0.430045] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x004fffff] res_to_dev_res add_size 400000 min_align 100000
[ 0.430046] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.430048] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.430049] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.430050] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.430052] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.430053] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.430054] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.430056] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.430060] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[ 0.430064] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.430067] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.430070] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
[ 0.430071] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.430074] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.430081] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 0.430083] pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
[ 0.430086] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbafffff]
[ 0.430088] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.430092] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.430100] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.430102] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.430105] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 0.430108] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.430112] pci 0000:00:1c.2: PCI bridge to [bus 06]
[ 0.430114] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.430117] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.430120] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.430124] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.430126] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.430129] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.430132] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.430136] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.430138] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 0.430141] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.430144] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
[ 0.430149] pci 0000:00:1e.0: PCI bridge to [bus 08]
[ 0.430151] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.430154] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.430161] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.430162] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.430163] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.430164] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.430165] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff window]
[ 0.430166] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 0.430168] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.430169] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfbafffff]
[ 0.430170] pci_bus 0000:02: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.430171] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 0.430172] pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff]
[ 0.430173] pci_bus 0000:07: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.430174] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 0.430175] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.430176] pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.430177] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 0.430178] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 0.430179] pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.430180] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.430181] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 0.430182] pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
[ 0.430184] pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
[ 0.430185] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.430186] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7 window]
[ 0.430187] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff window]
[ 0.430188] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.430189] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.430190] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff window]
[ 0.430191] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 0.430241] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.430242] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.430269] NET: Registered protocol family 2
[ 0.430469] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.430712] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.430851] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.430884] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.430933] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.431019] NET: Registered protocol family 1
[ 0.432677] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.432688] pci 0000:05:00.0: async suspend disabled to avoid multi-function power-on ordering issue
[ 0.432691] pci 0000:05:00.1: async suspend disabled to avoid multi-function power-on ordering issue
[ 0.432916] PCI: CLS 256 bytes, default 64
[ 0.432958] Unpacking initramfs...
[ 1.153035] Freeing initrd memory: 48264K
[ 1.153038] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.153040] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff9f30bb780000-ffff9f30bf77ffff]
[ 1.153315] Scanning for low memory corruption every 60 seconds
[ 1.153767] audit: initializing netlink subsys (disabled)
[ 1.153798] audit: type=2000 audit(1519651298.016:1): initialized
[ 1.154103] Initialise system trusted keyrings
[ 1.154177] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 1.155656] zbud: loaded
[ 1.156128] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.156308] fuse init (API version 7.26)
[ 1.157539] Key type asymmetric registered
[ 1.157540] Asymmetric key parser 'x509' registered
[ 1.157580] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.157612] io scheduler noop registered
[ 1.157613] io scheduler deadline registered
[ 1.157619] io scheduler cfq registered (default)
[ 1.157844] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 1.158626] vesafb: mode is 1680x1050x32, linelength=6720, pages=0
[ 1.158626] vesafb: scrolling: redraw
[ 1.158628] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.158638] vesafb: framebuffer at 0xcf000000, mapped to 0xffffacf282800000, using 6912k, total 6912k
[ 1.158732] Console: switching to colour frame buffer device 210x65
[ 1.158774] fb0: VESA VGA frame buffer device
[ 1.158785] intel_idle: MWAIT substates: 0x1120
[ 1.158785] intel_idle: v0.4.1 model 0x1A
[ 1.159072] intel_idle: lapic_timer_reliable_states 0x2
[ 1.159143] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.159146] ACPI: Power Button [PWRB]
[ 1.159179] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.159181] ACPI: Power Button [PWRF]
[ 1.159412] GHES: HEST is not enabled!
[ 1.159479] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.160785] Linux agpgart interface v0.103
[ 1.163822] loop: module loaded
[ 1.163989] libphy: Fixed MDIO Bus: probed
[ 1.163990] tun: Universal TUN/TAP device driver, 1.6
[ 1.163990] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 1.164060] PPP generic driver version 2.4.2
[ 1.164100] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.164103] ehci-pci: EHCI PCI platform driver
[ 1.164232] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.164237] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.164247] ehci-pci 0000:00:1a.7: debug port 1
[ 1.168157] ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
[ 1.168168] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9fff000
[ 1.183280] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.183329] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.183333] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.183335] usb usb1: Product: EHCI Host Controller
[ 1.183336] usb usb1: Manufacturer: Linux 4.10.0-28-generic ehci_hcd
[ 1.183337] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.183620] hub 1-0:1.0: USB hub found
[ 1.183631] hub 1-0:1.0: 6 ports detected
[ 1.183906] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.183910] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.183921] ehci-pci 0000:00:1d.7: debug port 1
[ 1.187808] ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
[ 1.187816] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9ffe000
[ 1.203228] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.203278] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.203280] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.203282] usb usb2: Product: EHCI Host Controller
[ 1.203284] usb usb2: Manufacturer: Linux 4.10.0-28-generic ehci_hcd
[ 1.203285] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.203552] hub 2-0:1.0: USB hub found
[ 1.203561] hub 2-0:1.0: 6 ports detected
[ 1.203758] ehci-pci 0000:08:00.2: EHCI Host Controller
[ 1.203762] ehci-pci 0000:08:00.2: new USB bus registered, assigned bus number 3
[ 1.203789] ehci-pci 0000:08:00.2: irq 18, io mem 0xfbeff000
[ 1.219223] ehci-pci 0000:08:00.2: USB 2.0 started, EHCI 1.00
[ 1.219269] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.219271] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.219273] usb usb3: Product: EHCI Host Controller
[ 1.219275] usb usb3: Manufacturer: Linux 4.10.0-28-generic ehci_hcd
[ 1.219277] usb usb3: SerialNumber: 0000:08:00.2
[ 1.219533] hub 3-0:1.0: USB hub found
[ 1.219551] hub 3-0:1.0: 4 ports detected
[ 1.219672] ehci-platform: EHCI generic platform driver
[ 1.219679] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.219682] ohci-pci: OHCI PCI platform driver
[ 1.219691] ohci-platform: OHCI generic platform driver
[ 1.219696] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.219809] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.219813] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 4
[ 1.219818] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.219843] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
[ 1.219878] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.219879] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.219880] usb usb4: Product: UHCI Host Controller
[ 1.219881] usb usb4: Manufacturer: Linux 4.10.0-28-generic uhci_hcd
[ 1.219882] usb usb4: SerialNumber: 0000:00:1a.0
[ 1.220139] hub 4-0:1.0: USB hub found
[ 1.220149] hub 4-0:1.0: 2 ports detected
[ 1.220365] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.220368] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 5
[ 1.220373] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.220394] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 1.220429] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.220430] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.220431] usb usb5: Product: UHCI Host Controller
[ 1.220432] usb usb5: Manufacturer: Linux 4.10.0-28-generic uhci_hcd
[ 1.220433] usb usb5: SerialNumber: 0000:00:1a.1
[ 1.220696] hub 5-0:1.0: USB hub found
[ 1.220705] hub 5-0:1.0: 2 ports detected
[ 1.220924] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.220927] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 6
[ 1.220932] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 1.220953] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
[ 1.220988] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.220989] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.220990] usb usb6: Product: UHCI Host Controller
[ 1.220991] usb usb6: Manufacturer: Linux 4.10.0-28-generic uhci_hcd
[ 1.220992] usb usb6: SerialNumber: 0000:00:1a.2
[ 1.221248] hub 6-0:1.0: USB hub found
[ 1.221257] hub 6-0:1.0: 2 ports detected
[ 1.221463] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.221467] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 7
[ 1.221472] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.221488] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
[ 1.221524] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.221525] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.221526] usb usb7: Product: UHCI Host Controller
[ 1.221527] usb usb7: Manufacturer: Linux 4.10.0-28-generic uhci_hcd
[ 1.221528] usb usb7: SerialNumber: 0000:00:1d.0
[ 1.221782] hub 7-0:1.0: USB hub found
[ 1.221794] hub 7-0:1.0: 2 ports detected
[ 1.222004] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.222008] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 8
[ 1.222013] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.222030] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 1.222065] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.222066] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.222067] usb usb8: Product: UHCI Host Controller
[ 1.222068] usb usb8: Manufacturer: Linux 4.10.0-28-generic uhci_hcd
[ 1.222069] usb usb8: SerialNumber: 0000:00:1d.1
[ 1.222192] hub 8-0:1.0: USB hub found
[ 1.222197] hub 8-0:1.0: 2 ports detected
[ 1.222371] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.222377] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 9
[ 1.222382] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.222398] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
[ 1.222432] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.222433] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.222434] usb usb9: Product: UHCI Host Controller
[ 1.222435] usb usb9: Manufacturer: Linux 4.10.0-28-generic uhci_hcd
[ 1.222436] usb usb9: SerialNumber: 0000:00:1d.2
[ 1.222563] hub 9-0:1.0: USB hub found
[ 1.222567] hub 9-0:1.0: 2 ports detected
[ 1.222676] uhci_hcd 0000:08:00.0: UHCI Host Controller
[ 1.222680] uhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 10
[ 1.222686] uhci_hcd 0000:08:00.0: detected 2 ports
[ 1.222703] uhci_hcd 0000:08:00.0: irq 16, io base 0x0000e880
[ 1.222736] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.222737] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.222738] usb usb10: Product: UHCI Host Controller
[ 1.222739] usb usb10: Manufacturer: Linux 4.10.0-28-generic uhci_hcd
[ 1.222740] usb usb10: SerialNumber: 0000:08:00.0
[ 1.222860] hub 10-0:1.0: USB hub found
[ 1.222864] hub 10-0:1.0: 2 ports detected
[ 1.222972] uhci_hcd 0000:08:00.1: UHCI Host Controller
[ 1.222975] uhci_hcd 0000:08:00.1: new USB bus registered, assigned bus number 11
[ 1.222980] uhci_hcd 0000:08:00.1: detected 2 ports
[ 1.223002] uhci_hcd 0000:08:00.1: irq 17, io base 0x0000ec00
[ 1.223039] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.223040] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.223041] usb usb11: Product: UHCI Host Controller
[ 1.223042] usb usb11: Manufacturer: Linux 4.10.0-28-generic uhci_hcd
[ 1.223043] usb usb11: SerialNumber: 0000:08:00.1
[ 1.223212] hub 11-0:1.0: USB hub found
[ 1.223216] hub 11-0:1.0: 2 ports detected
[ 1.223330] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[ 1.223331] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 1.225028] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.225032] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.225183] mousedev: PS/2 mouse device common for all mice
[ 1.225371] rtc_cmos 00:01: RTC can wake from S4
[ 1.225522] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.225545] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.225550] i2c /dev entries driver
[ 1.225593] device-mapper: uevent: version 1.0.3
[ 1.225715] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: <email address hidden>
[ 1.226287] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.226747] NET: Registered protocol family 10
[ 1.231004] Segment Routing with IPv6
[ 1.231027] NET: Registered protocol family 17
[ 1.231039] Key type dns_resolver registered
[ 1.232321] microcode: sig=0x106a4, pf=0x2, revision=0x10
[ 1.232630] microcode: Microcode Update Driver: v2.2.
[ 1.232952] registered taskstats version 1
[ 1.232963] Loading compiled-in X.509 certificates
[ 1.235667] Loaded X.509 cert 'Build time autogenerated kernel key: 1dbff672f4e4d459849c8aa71c01089bd04bfcdd'
[ 1.235683] zswap: loaded using pool lzo/zbud
[ 1.250225] Key type big_key registered
[ 1.250230] Key type trusted registered
[ 1.252454] Key type encrypted registered
[ 1.252458] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.252461] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.252492] evm: HMAC attrs: 0x1
[ 1.252887] Magic number: 6:131:383
[ 1.252896] usb usb1: hash matches
[ 1.253276] rtc_cmos 00:01: setting system clock to 2018-02-26 13:21:38 UTC (1519651298)
[ 1.257563] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.257564] EDD information not available.
[ 1.257590] PM: Hibernation image not present or could not be loaded.
[ 1.259963] Freeing unused kernel memory: 2228K
[ 1.259964] Write protecting the kernel read-only data: 14336k
[ 1.261127] Freeing unused kernel memory: 1164K
[ 1.262061] Freeing unused kernel memory: 272K
[ 1.270202] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.279654] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.279723] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.279733] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.280108] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.280136] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.281490] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.281507] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.281551] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.281857] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.281912] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.309413] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.318720] pata_jmicron 0000:05:00.1: enabling device (0000 -> 0001)
[ 1.319496] sky2: driver version 1.30
[ 1.319580] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
[ 1.319908] sky2 0000:06:00.0 eth0: addr 00:23:54:88:66:da
[ 1.319980] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
[ 1.320273] sky2 0000:04:00.0 eth1: addr 00:23:54:88:6d:4e
[ 1.320989] ahci 0000:00:1f.2: version 3.0
[ 1.321163] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.321200] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.321202] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 1.323558] [drm] Initialized
[ 1.325981] scsi host0: pata_jmicron
[ 1.326121] scsi host1: pata_jmicron
[ 1.326181] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17
[ 1.326183] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17
[ 1.338487] nvidia: loading out-of-tree module taints kernel.
[ 1.338492] nvidia: module license 'NVIDIA' taints kernel.
[ 1.338493] Disabling lock debugging due to kernel taint
[ 1.344602] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 1.346590] sky2 0000:06:00.0 enp6s0: renamed from eth0
[ 1.351611] nvidia-nvlink: Nvlink Core is being initialized, major device number 245
[ 1.351911] nvidia 0000:02:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 1.351999] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 384.111 Tue Dec 19 23:51:45 PST 2017 (using threaded interrupts)
[ 1.353856] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 384.111 Tue Dec 19 22:56:18 PST 2017
[ 1.354592] [drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver
[ 1.375436] sky2 0000:04:00.0 enp4s0: renamed from eth1
[ 1.384085] scsi host2: ahci
[ 1.384284] scsi host3: ahci
[ 1.384648] scsi host4: ahci
[ 1.384848] scsi host5: ahci
[ 1.385203] scsi host6: ahci
[ 1.385398] scsi host7: ahci
[ 1.385469] ata3: SATA max UDMA/133 abar m2048@0xf9ffc000 port 0xf9ffc100 irq 30
[ 1.385471] ata4: SATA max UDMA/133 abar m2048@0xf9ffc000 port 0xf9ffc180 irq 30
[ 1.385473] ata5: SATA max UDMA/133 abar m2048@0xf9ffc000 port 0xf9ffc200 irq 30
[ 1.385475] ata6: SATA max UDMA/133 abar m2048@0xf9ffc000 port 0xf9ffc280 irq 30
[ 1.385477] ata7: SATA max UDMA/133 abar m2048@0xf9ffc000 port 0xf9ffc300 irq 30
[ 1.385478] ata8: SATA max UDMA/133 abar m2048@0xf9ffc000 port 0xf9ffc380 irq 30
[ 1.395271] firewire_ohci 0000:08:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.395687] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.395689] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.395951] scsi host8: ahci
[ 1.396082] scsi host9: ahci
[ 1.396135] ata9: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
[ 1.396138] ata10: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
[ 1.484102] ata1.00: ATAPI: SAMSUNG DVD-ROM SD-616E, F501, max UDMA/33
[ 1.487218] ata1.00: configured for UDMA/33
[ 1.489074] scsi 0:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-616E F501 PQ: 0 ANSI: 5
[ 1.512076] sr 0:0:0:0: [sr0] scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
[ 1.512078] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.512396] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.512499] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.555173] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.691166] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 1.708454] usb 3-1: New USB device found, idVendor=1a40, idProduct=0201
[ 1.708456] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.708458] usb 3-1: Product: USB 2.0 Hub [MTT]
[ 1.708649] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.708685] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.708922] hub 3-1:1.0: USB hub found
[ 1.708977] hub 3-1:1.0: 7 ports detected
[ 1.737673] random: fast init done
[ 1.859128] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.861020] ata3.00: supports DRM functions and may not be fully accessible
[ 1.861417] ata3.00: disabling queued TRIM support
[ 1.861419] ata3.00: ATA-9: Samsung SSD 840 EVO 1TB, EXT0DB6Q, max UDMA/133
[ 1.861421] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.861583] ata3.00: supports DRM functions and may not be fully accessible
[ 1.861963] ata3.00: disabling queued TRIM support
[ 1.861965] ata3.00: configured for UDMA/133
[ 1.862345] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5
[ 1.876271] usb 5-1: New USB device found, idVendor=187c, idProduct=0517
[ 1.876273] usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.876275] usb 5-1: Product: Alienware TactX ™ Keyboard
[ 1.883073] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.903498] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.903728] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.903815] sd 2:0:0:0: [sda] Write Protect is off
[ 1.903817] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.903898] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.905244] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[ 1.905768] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.915351] usbcore: registered new interface driver usbhid
[ 1.915352] usbhid: USB HID core driver
[ 1.916965] input: Alienware TactX ™ Keyboard as /devices/pci0000:00/0000:00:1a.1/usb5/5-1/5-1:1.0/0003:187C:0517.0001/input/input5
[ 1.927249] firewire_core 0000:08:02.0: created device fw0: GUID 001e8c0001ab6257, S400
[ 1.975596] hid-generic 0003:187C:0517.0001: input,hidraw0: USB HID v1.10 Keyboard [Alienware TactX ™ Keyboard] on usb-0000:00:1a.1-1/input0
[ 1.991371] input: Alienware TactX ™ Keyboard as /devices/pci0000:00/0000:00:1a.1/usb5/5-1/5-1:1.1/0003:187C:0517.0002/input/input6
[ 2.023161] usb 10-2: new full-speed USB device number 2 using uhci_hcd
[ 2.051692] hid-generic 0003:187C:0517.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Alienware TactX ™ Keyboard] on usb-0000:00:1a.1-1/input1
[ 2.179092] tsc: Refined TSC clocksource calibration: 2669.999 MHz
[ 2.179335] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x267c8988822, max_idle_ns: 440795264614 ns
[ 2.218624] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.535136] usb 5-2: new full-speed USB device number 3 using uhci_hcd
[ 2.695109] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.695709] ata5.00: ATA-9: WDC WD30EFRX-68AX9N0, 80.00A80, max UDMA/133
[ 2.695711] ata5.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.696361] ata5.00: configured for UDMA/133
[ 2.696852] scsi 4:0:0:0: Direct-Access ATA WDC WD30EFRX-68A 0A80 PQ: 0 ANSI: 5
[ 2.724231] usb 5-2: New USB device found, idVendor=046d, idProduct=c51a
[ 2.724234] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.724236] usb 5-2: Product: USB Receiver
[ 2.724238] usb 5-2: Manufacturer: Logitech
[ 2.727305] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2.727472] sd 4:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 2.727474] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[ 2.727543] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.727545] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.727637] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.731393] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb5/5-2/5-2:1.0/0003:046D:C51A.0003/input/input7
[ 2.731845] hid-generic 0003:046D:C51A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-2/input0
[ 2.737352] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb5/5-2/5-2:1.1/0003:046D:C51A.0004/input/input8
[ 2.770107] usb 10-2: New USB device found, idVendor=046d, idProduct=0a1f
[ 2.770110] usb 10-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.770111] usb 10-2: Product: Logitech G930 Headset
[ 2.770113] usb 10-2: Manufacturer: Logitech
[ 2.784167] input: Logitech Logitech G930 Headset as /devices/pci0000:00/0000:00:1e.0/0000:08:00.0/usb10/10-2/10-2:1.3/0003:046D:0A1F.0005/input/input9
[ 2.787287] sdb: sdb1 sdb2
[ 2.788614] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2.795577] hid-generic 0003:046D:C51A.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-2/input1
[ 2.855335] hid-generic 0003:046D:0A1F.0005: input,hiddev0,hidraw4: USB HID v1.01 Device [Logitech Logitech G930 Headset] on usb-0000:08:00.0-2/input3
[ 2.859127] usb 11-1: new low-speed USB device number 2 using uhci_hcd
[ 3.046101] usb 11-1: New USB device found, idVendor=046d, idProduct=c016
[ 3.046104] usb 11-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.046106] usb 11-1: Product: Optical USB Mouse
[ 3.046108] usb 11-1: Manufacturer: Logitech
[ 3.062330] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1e.0/0000:08:00.1/usb11/11-1/11-1:1.0/0003:046D:C016.0006/input/input10
[ 3.062771] hid-generic 0003:046D:C016.0006: input,hidraw5: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:08:00.1-1/input0
[ 3.203172] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.203381] clocksource: Switched to clocksource tsc
[ 3.204054] ata6.00: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133
[ 3.204056] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.205069] ata6.00: configured for UDMA/133
[ 3.205486] scsi 5:0:0:0: Direct-Access ATA WDC WD1001FALS-0 0K05 PQ: 0 ANSI: 5
[ 3.235237] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 3.235456] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 3.235532] sd 5:0:0:0: [sdc] Write Protect is off
[ 3.235534] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.235808] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.245916] sdc: sdc1
[ 3.246686] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 3.347021] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[ 3.423106] usb 3-1.1: new high-speed USB device number 4 using ehci-pci
[ 3.531928] usb 3-1.1: New USB device found, idVendor=1a40, idProduct=0101
[ 3.531931] usb 3-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.531933] usb 3-1.1: Product: USB 2.0 Hub
[ 3.532348] hub 3-1.1:1.0: USB hub found
[ 3.532477] hub 3-1.1:1.0: 4 ports detected
[ 3.535143] usb 6-1: New USB device found, idVendor=187c, idProduct=0516
[ 3.535145] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.535147] usb 6-1: Product: AlienFx Backlight
[ 3.535149] usb 6-1: Manufacturer: Alienware
[ 3.546286] input: Alienware AlienFx Backlight as /devices/pci0000:00/0000:00:1a.2/usb6/6-1/6-1:1.0/0003:187C:0516.0007/input/input11
[ 3.603557] hid-generic 0003:187C:0516.0007: input,hiddev0,hidraw6: USB HID v1.11 Keypad [Alienware AlienFx Backlight] on usb-0000:00:1a.2-1/input0
[ 3.651156] usb 3-4: new high-speed USB device number 6 using ehci-pci
[ 3.711162] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.714366] ata7.00: ATAPI: ASUS DRW-24B1ST j, 1.01, max UDMA/133
[ 3.715205] ata7.00: configured for UDMA/133
[ 3.716865] scsi 6:0:0:0: CD-ROM ASUS DRW-24B1ST j 1.01 PQ: 0 ANSI: 5
[ 3.741832] sr 6:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.742177] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 3.742285] sr 6:0:0:0: Attached scsi generic sg4 type 5
[ 3.821729] usb 3-4: New USB device found, idVendor=1058, idProduct=1102
[ 3.821732] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.821734] usb 3-4: Product: My Book
[ 3.821735] usb 3-4: Manufacturer: Western Digital
[ 3.821737] usb 3-4: SerialNumber: 57442D574341534A31333935393537
[ 3.845861] input: Western Digital My Book as /devices/pci0000:00/0000:00:1e.0/0000:08:00.2/usb3/3-4/3-4:1.1/0003:1058:1102.0008/input/input12
[ 3.846151] hid-generic 0003:1058:1102.0008: input,hidraw7: USB HID v1.11 Device [Western Digital My Book] on usb-0000:08:00.2-4/input1
[ 3.850075] usb-storage 3-4:1.0: USB Mass Storage device detected
[ 3.850208] scsi host10: usb-storage 3-4:1.0
[ 3.850309] usbcore: registered new interface driver usb-storage
[ 3.853035] usbcore: registered new interface driver uas
[ 4.219047] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.219580] ata8.00: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB03, max UDMA/100
[ 4.220356] ata8.00: configured for UDMA/100
[ 4.221521] scsi 7:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223Q SB03 PQ: 0 ANSI: 5
[ 4.246497] sr 7:0:0:0: [sr2] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.246819] sr 7:0:0:0: Attached scsi CD-ROM sr2
[ 4.246988] sr 7:0:0:0: Attached scsi generic sg5 type 5
[ 4.275154] usb 6-2: new full-speed USB device number 3 using uhci_hcd
[ 4.451113] floppy0: no floppy controllers found
[ 4.451123] work still pending
[ 4.460145] usb 6-2: New USB device found, idVendor=19ff, idProduct=0239
[ 4.460148] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.460150] usb 6-2: Product: BCM20702A0
[ 4.460152] usb 6-2: Manufacturer: Broadcom Corp
[ 4.460153] usb 6-2: SerialNumber: 98588A0494DA
[ 4.526489] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 4.613972] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 4.614131] systemd[1]: Detected architecture x86-64.
[ 4.614277] systemd[1]: Set hostname to <al-ubuntu>.
[ 4.670031] systemd[1]: Reached target Remote File Systems (Pre).
[ 4.670104] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.670135] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[ 4.670160] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.670169] systemd[1]: Reached target Encrypted Volumes.
[ 4.670220] systemd[1]: Listening on Journal Audit Socket.
[ 4.670302] systemd[1]: Created slice System Slice.
[ 4.693173] lp: driver loaded but no devices found
[ 4.696760] ppdev: user-space parallel port driver
[ 4.748675] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 4.766034] systemd-journald[332]: Received request to flush runtime journal from PID 1
[ 4.871820] wmi: Mapper loaded
[ 4.872852] scsi 10:0:0:0: Direct-Access WD My Book 1034 PQ: 0 ANSI: 4
[ 4.872880] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 4.873210] sd 10:0:0:0: Attached scsi generic sg6 type 0
[ 4.888208] sd 10:0:0:0: [sdd] Spinning up disk...
[ 4.894425] i5500_temp 0000:00:14.3: Sensor seems to be disabled
[ 4.896069] EDAC MC: Ver: 3.0.0
[ 4.899161] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.900055] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20160930/utaddress-247)
[ 4.900062] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.900064] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20160930/utaddress-247)
[ 4.900069] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.900069] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000050F (\SBG6) (20160930/utaddress-247)
[ 4.900073] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20160930/utaddress-247)
[ 4.900077] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.900077] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.901174] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT)
[ 4.901210] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 4.901216] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 4.931395] audit: type=1400 audit(1519651302.170:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=594 comm="apparmor_parser"
[ 4.933789] audit: type=1400 audit(1519651302.174:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=591 comm="apparmor_parser"
[ 4.933792] audit: type=1400 audit(1519651302.174:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=591 comm="apparmor_parser"
[ 4.934608] audit: type=1400 audit(1519651302.174:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=587 comm="apparmor_parser"
[ 4.934611] audit: type=1400 audit(1519651302.174:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=587 comm="apparmor_parser"
[ 4.934612] audit: type=1400 audit(1519651302.174:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=587 comm="apparmor_parser"
[ 4.934613] audit: type=1400 audit(1519651302.174:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=587 comm="apparmor_parser"
[ 4.937323] audit: type=1400 audit(1519651302.178:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=592 comm="apparmor_parser"
[ 4.937751] audit: type=1400 audit(1519651302.178:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=598 comm="apparmor_parser"
[ 4.966045] Bluetooth: Core ver 2.22
[ 4.966058] NET: Registered protocol family 31
[ 4.966058] Bluetooth: HCI device and connection manager initialized
[ 4.966061] Bluetooth: HCI socket layer initialized
[ 4.966063] Bluetooth: L2CAP socket layer initialized
[ 4.966067] Bluetooth: SCO socket layer initialized
[ 4.972056] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 243
[ 4.977897] usbcore: registered new interface driver btusb
[ 4.992581] snd_hda_intel 0000:02:00.1: Disabling MSI
[ 4.992592] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[ 4.996056] random: crng init done
[ 5.026508] usbcore: registered new interface driver snd-usb-audio
[ 5.091119] Bluetooth: hci0: BCM: chip id 73
[ 5.123105] Bluetooth: hci0: al-ubuntu
[ 5.125109] Bluetooth: hci0: BCM20702B0 (002.001.014) build 0557
[ 5.168365] bluetooth hci0: Direct firmware load for brcm/BCM20702B0-19ff-0239.hcd failed with error -2
[ 5.168369] Bluetooth: hci0: BCM: Patch brcm/BCM20702B0-19ff-0239.hcd not found
[ 5.254881] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 5.373405] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1989B: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
[ 5.373406] snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.373408] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 5.373408] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
[ 5.373409] snd_hda_codec_analog hdaudioC0D0: dig-out=0x1b/0x1d
[ 5.373410] snd_hda_codec_analog hdaudioC0D0: inputs:
[ 5.373412] snd_hda_codec_analog hdaudioC0D0: Front Mic=0x14
[ 5.373413] snd_hda_codec_analog hdaudioC0D0: Rear Mic=0x17
[ 5.373414] snd_hda_codec_analog hdaudioC0D0: Line=0x15
[ 5.373415] snd_hda_codec_analog hdaudioC0D0: CD=0x18
[ 5.386044] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 5.386150] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 5.386275] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 5.386389] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 5.386499] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 5.386615] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 5.386731] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 5.386805] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 5.453749] Adding 12572668k swap on /dev/sda7. Priority:-1 extents:1 across:12572668k SSFS
[ 5.696945] NVRM: Your system is not currently configured to drive a VGA console
               on the primary VGA device. The NVIDIA Linux graphics driver
               requires the use of a text-mode VGA console. Use of other console
               drivers including, but not limited to, vesafb, may result in
               corruption and stability problems, and is not supported.
[ 5.716693] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 5.719645] sky2 0000:04:00.0 enp4s0: enabling interface
[ 5.719860] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 5.723918] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[ 5.726867] sky2 0000:06:00.0 enp6s0: enabling interface
[ 5.726944] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[ 5.843793] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card2/input21
[ 5.843879] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card2/input22
[ 5.843956] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card2/input23
[ 5.844032] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card2/input24
[ 5.998922] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.998923] Bluetooth: BNEP filters: protocol multicast
[ 5.998926] Bluetooth: BNEP socket layer initialized
[ 6.457380] nvidia-modeset: Allocated GPU:0 (GPU-e3be0b60-d6cc-8670-f583-656d2516fa4b) @ PCI:0000:02:00.0
[ 6.491417] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 8.034912] floppy0: no floppy controllers found
[ 8.508104] sky2 0000:06:00.0 enp6s0: Link is up at 1000 Mbps, full duplex, flow control both
[ 8.508122] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
[ 14.390376] Bluetooth: RFCOMM TTY layer initialized
[ 14.390382] Bluetooth: RFCOMM socket layer initialized
[ 14.390386] Bluetooth: RFCOMM ver 1.11
[ 14.438659] .
[ 14.441421] ready
[ 14.443934] sd 10:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 14.446802] sd 10:0:0:0: [sdd] Write Protect is off
[ 14.446805] sd 10:0:0:0: [sdd] Mode Sense: 10 00 00 00
[ 14.449670] sd 10:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.460807] sdd: sdd1
[ 14.484954] sd 10:0:0:0: [sdd] Attached SCSI disk
[ 16.845252] retire_capture_urb: 13 callbacks suppressed
[ 663.431970] systemd: 38 output lines suppressed due to ratelimiting
[ 813.028301] audit: type=1400 audit(1519652110.048:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=8292 comm="apparmor_parser"
[ 813.028751] audit: type=1400 audit(1519652110.048:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=8292 comm="apparmor_parser"
[ 813.041831] audit: type=1400 audit(1519652110.064:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=8292 comm="apparmor_parser"
[ 832.275964] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 832.283255] JFS: nTxBlock = 8192, nTxLock = 65536
[ 832.296053] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 832.316849] QNX4 filesystem 0.2.3 registered.
[ 832.372597] raid6: sse2x1 gen() 4799 MB/s
[ 832.420605] raid6: sse2x1 xor() 3737 MB/s
[ 832.468605] raid6: sse2x2 gen() 5663 MB/s
[ 832.516596] raid6: sse2x2 xor() 4413 MB/s
[ 832.564601] raid6: sse2x4 gen() 6467 MB/s
[ 832.612594] raid6: sse2x4 xor() 4940 MB/s
[ 832.612595] raid6: using algorithm sse2x4 gen() 6467 MB/s
[ 832.612596] raid6: .... xor() 4940 MB/s, rmw enabled
[ 832.612597] raid6: using ssse3x2 recovery algorithm
[ 832.615888] xor: measuring software checksum speed
[ 832.652480] prefetch64-sse: 6556.000 MB/sec
[ 832.692475] generic_sse: 5852.000 MB/sec
[ 832.692476] xor: using function: prefetch64-sse (6556.000 MB/sec)
[ 832.718214] Btrfs loaded, crc32c=crc32c-intel
[ 839.387315] audit: type=1400 audit(1519652136.409:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/ippusbxd" pid=12263 comm="apparmor_parser"
[ 839.486674] audit: type=1400 audit(1519652136.509:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=12261 comm="apparmor_parser"
[ 839.572457] audit: type=1400 audit(1519652136.597:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/tcpdump" pid=12268 comm="apparmor_parser"
[ 839.619764] audit: type=1400 audit(1519652136.641:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=12260 comm="apparmor_parser"
[ 839.652376] audit: type=1400 audit(1519652136.677:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=12260 comm="apparmor_parser"
[ 839.659842] audit: type=1400 audit(1519652136.681:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=12252 comm="apparmor_parser"
[ 839.660419] audit: type=1400 audit(1519652136.685:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=12252 comm="apparmor_parser"
[ 839.660961] audit: type=1400 audit(1519652136.685:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=12252 comm="apparmor_parser"
[ 839.661470] audit: type=1400 audit(1519652136.685:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=12252 comm="apparmor_parser"
[ 839.671508] audit: type=1400 audit(1519652136.693:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=12264 comm="apparmor_parser"
[ 846.768593] kauditd_printk_skb: 12 callbacks suppressed
[ 846.768596] audit: type=1400 audit(1519652143.793:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=15761 comm="apparmor_parser"
[ 846.784240] audit: type=1400 audit(1519652143.809:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=15761 comm="apparmor_parser"
[ 846.784504] audit: type=1400 audit(1519652143.809:51): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//snap_update_ns" pid=15761 comm="apparmor_parser"
[ 851.386069] audit: type=1400 audit(1519652148.409:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/tcpdump" pid=15989 comm="apparmor_parser"
[ 857.468745] audit: type=1400 audit(1519652154.493:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince" pid=16184 comm="apparmor_parser"
[ 857.488330] audit: type=1400 audit(1519652154.513:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=16184 comm="apparmor_parser"
[ 857.490446] audit: type=1400 audit(1519652154.513:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer" pid=16184 comm="apparmor_parser"
[ 857.512154] audit: type=1400 audit(1519652154.537:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=16184 comm="apparmor_parser"
[ 857.514062] audit: type=1400 audit(1519652154.537:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=16184 comm="apparmor_parser"
[ 857.536062] audit: type=1400 audit(1519652154.561:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=16184 comm="apparmor_parser"
[ 910.249550] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 992.757088] pool[23114]: segfault at 700000008 ip 00007f4d020197ed sp 00007f4cd7ffe868 error 4 in libgobject-2.0.so.0.4800.2[7f4d01fe5000+52000]
[ 7991.997018] perf: interrupt took too long (3192 > 3128), lowering kernel.perf_event_max_sample_rate to 62500

Revision history for this message
Al (homeuser66) said :
#3
Revision history for this message
Al (homeuser66) said :
#4

@actionparsnip (andrew-woodhead666) Any Updates?

Revision history for this message
Launchpad Janitor (janitor) said :
#5

This question was expired because it remained in the 'Open' state without activity for the last 15 days.

Revision history for this message
Al (homeuser66) said :
#6

Still waiting on some help for this

⁣Sent from BlueMail ​

On Mar 15, 2018, 04:33, at 04:33, Launchpad Janitor <email address hidden> wrote:
>Your question #664870 on Ubuntu changed:
>https://answers.launchpad.net/ubuntu/+question/664870
>
> Status: Open => Expired
>
>Launchpad Janitor expired the question:
>This question was expired because it remained in the 'Open' state
>without activity for the last 15 days.
>
>--
>If you're still having this problem, you can reopen your question
>either
>by replying to this email or by going to the following page and
>entering more information about your problem:
>https://answers.launchpad.net/ubuntu/+question/664870
>
>You received this question notification because you asked the question.

Revision history for this message
Launchpad Janitor (janitor) said :
#7

This question was expired because it remained in the 'Open' state without activity for the last 15 days.