Ubuntu

bugs after waking from stand by

Asked by Manu

Hello,
I have a HP ProBook G3 laptop on Ubuntu 17.10. The stand by seems to work, but after waking up, i can't shut down my computer, and it doesn't accept any more stand by. If i try shutting it down, it freezes and i must shut the power off.
Also, after waking up, the lspci command doesn't work any more (the terminal freezes if i try). I suppose the issue comes from a PCI device that doesn't support wake up, but i'm not sure of which one.
I tried adding pci=noacpi at grub starting options, but my computer cant start with it.

Here is the result of lspci :
$ lspci
00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Topaz XT [Radeon R7 M260/M265 / M340/M360 / M440/M445] (rev 83)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
03:00.0 Network controller: Intel Corporation Wireless 3165 (rev 81)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A PCI Express Card Reader (rev 01)

and :

$ lspci -tv
-[0000:00]-+-00.0 Intel Corporation Skylake Host Bridge/DRAM Registers
           +-02.0 Intel Corporation HD Graphics 520
           +-14.0 Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller
           +-14.2 Intel Corporation Sunrise Point-LP Thermal subsystem
           +-16.0 Intel Corporation Sunrise Point-LP CSME HECI #1
           +-17.0 Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode]
           +-1c.0-[01]----00.0 Advanced Micro Devices, Inc. [AMD/ATI] Topaz XT [Radeon R7 M260/M265 / M340/M360 / M440/M445]
           +-1c.4-[02]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           +-1c.5-[03]----00.0 Intel Corporation Wireless 3165
           +-1d.0-[04]----00.0 Realtek Semiconductor Co., Ltd. RTS522A PCI Express Card Reader
           +-1f.0 Intel Corporation Sunrise Point-LP LPC Controller
           +-1f.2 Intel Corporation Sunrise Point-LP PMC
           +-1f.3 Intel Corporation Sunrise Point-LP HD Audio
           \-1f.4 Intel Corporation Sunrise Point-LP SMBus

i saw that in dmesg, i don't know if it's important :
$ dmesg | grep 'ACPI Error'
[ 16.289163] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8ff3ab48f1b0 (20170531/exresop-593)
[ 16.289172] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPO, AE_AML_OPERAND_TYPE (20170531/psparse-550)
[ 16.289177] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_TYPE (20170531/psparse-550)
[ 16.289814] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8ff3ab48f750 (20170531/exresop-593)
[ 16.289820] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPO, AE_AML_OPERAND_TYPE (20170531/psparse-550)
[ 16.289824] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_TYPE (20170531/psparse-550)
[ 16.290451] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8ff3ab48fcf0 (20170531/exresop-593)
[ 16.290456] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPO, AE_AML_OPERAND_TYPE (20170531/psparse-550)
[ 16.290460] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_TYPE (20170531/psparse-550)
[ 16.292308] ACPI Error: Attempt to CreateField of length zero (20170531/dsopcode-168)
[ 16.292313] ACPI Error: Method parse/execution failed \_SB.WMIV.WVPI, AE_AML_OPERAND_VALUE (20170531/psparse-550)
[ 16.292322] ACPI Error: Method parse/execution failed \_SB.WMIV.WMPV, AE_AML_OPERAND_VALUE (20170531/psparse-550)

$ dmesg | grep 'ACPI Exception'
[ 16.289169] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170531/dswexec-461)
[ 16.289817] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170531/dswexec-461)
[ 16.290453] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170531/dswexec-461)

and, after a wake up :
[ 235.104887] pciehp 0000:00:1d.0:pcie004: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add
[ 235.104888] pciehp 0000:00:1d.0:pcie004: Cannot add device at 0000:04:00

Does it mean that the trouble comes from the SD card reader ? If it's the case, is there a way to resolve it (if it's help, i almost never use the SD card reader).

Thanks in advance for any assistance.

Question information

Language:
English Edit question
Status:
Expired
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
actionparsnip (andrew-woodhead666) said : 		#1

Do you have the latest BIOS?

Revision history for this message
Manu (manu-delay) said : 		#2

Thanks for your answer.
 I upgraded to BIOS 01.19 Rev.A which is the latest one, but it didn't change anything.

Revision history for this message
actionparsnip (andrew-woodhead666) said : 		#3

Do you use your card reader? This seems to be causing the issue

Revision history for this message
Manu (manu-delay) said : 		#4

I also thought that, but i tried two things:
- i tried inserting a sd card after waking up, and i could read it correctly
- i tried disconnecting the card reader from the bios, and it didn't change anything.

Revision history for this message
Manu (manu-delay) said : 		#5

I saw these line in dmesg, i don't really understand, but maybe it can help :

[ 1323.536604] Restarting tasks ...
[ 1323.548152] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 1323.548155] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 1323.563517] [drm] PCIE GART of 3072M enabled (table at 0x0000000000040000).
[ 1323.565769] BUG: unable to handle kernel paging request at ffff998641194fec
[ 1323.565858] IP: smu7_populate_single_firmware_entry.isra.4+0x55/0xd0 [amdgpu]
[ 1323.565893] PGD 0
[ 1323.565893] P4D 0

[ 1323.565929] Oops: 0002 [#1] SMP PTI
[ 1323.565950] Modules linked in: rfcomm pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) ccm bnep binfmt_misc nls_iso8859_1 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm irqbypass crct10dif_pclmul uvcvideo crc32_pclmul snd_hda_codec_hdmi videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev ghash_clmulni_intel snd_hda_codec_conexant snd_hda_codec_generic pcbc media aesni_intel aes_x86_64 snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc crypto_simd snd_soc_sst_dsp btusb btrtl btbcm btintel bluetooth glue_helper ecdh_generic snd_hda_ext_core snd_soc_sst_match cryptd arc4 snd_soc_core snd_compress intel_cstate ac97_bus iwlmvm mac80211 intel_rapl_perf snd_pcm_dmaengine snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep rtsx_pci_ms memstick snd_pcm iwlwifi joydev
[ 1323.566298] input_leds serio_raw hp_wmi snd_seq_midi snd_seq_midi_event cfg80211 wmi_bmof sparse_keymap snd_rawmidi snd_seq snd_seq_device snd_timer snd soundcore hp_accel shpchp mei_me lis3lv02d input_polldev acpi_pad tpm_infineon intel_pch_thermal mac_hid hp_wireless mei parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid amdkfd amd_iommu_v2 amdgpu rtsx_pci_sdmmc i915 psmouse ttm i2c_algo_bit drm_kms_helper syscopyarea rtsx_pci r8169 sysfillrect mii sysimgblt fb_sys_fops ahci drm libahci wmi video
[ 1323.566542] CPU: 0 PID: 3958 Comm: kworker/0:3 Tainted: G OE 4.13.0-25-generic #29-Ubuntu
[ 1323.566583] Hardware name: HP HP ProBook 470 G3/8102, BIOS N78 Ver. 01.19 10/17/2017
[ 1323.566625] Workqueue: pm pm_runtime_work
[ 1323.566647] task: ffff889f24f3df00 task.stack: ffff996a43e98000
[ 1323.566713] RIP: 0010:smu7_populate_single_firmware_entry.isra.4+0x55/0xd0 [amdgpu]
[ 1323.566750] RSP: 0018:ffff996a43e9b808 EFLAGS: 00010246
[ 1323.566776] RAX: 000000000000007e RBX: ffff998641194fec RCX: 000000008003d000
[ 1323.566811] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff889febceec80
[ 1323.566844] RBP: ffff996a43e9b858 R08: ffff889feb920000 R09: 0000000000033930
[ 1323.566878] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003
[ 1323.566910] R13: ffff889fecb95048 R14: ffff889feb0dc000 R15: 00000000000005fe
[ 1323.566946] FS: 0000000000000000(0000) GS:ffff88a000400000(0000) knlGS:0000000000000000
[ 1323.566984] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1323.567013] CR2: ffff998641194fec CR3: 00000000b280a003 CR4: 00000000003606f0
[ 1323.567047] Call Trace:
[ 1323.567103] smu7_request_smu_load_fw+0xab/0x320 [amdgpu]
[ 1323.567163] iceland_start_smu+0x39/0x70 [amdgpu]
[ 1323.567216] pp_resume+0xa9/0x120 [amdgpu]
[ 1323.567288] amdgpu_pp_resume+0x22/0x30 [amdgpu]
[ 1323.567333] amdgpu_resume_phase2+0x45/0xb0 [amdgpu]
[ 1323.567378] amdgpu_device_resume+0x13b/0x420 [amdgpu]
[ 1323.567408] ? __pci_set_master+0x34/0xe0
[ 1323.567429] ? vga_switcheroo_set_dynamic_switch+0x80/0x80
[ 1323.567468] amdgpu_pmops_runtime_resume+0x76/0xc0 [amdgpu]
[ 1323.567492] pci_pm_runtime_resume+0x7a/0xa0
[ 1323.567513] vga_switcheroo_runtime_resume+0x4d/0x50
[ 1323.567536] __rpm_callback+0xc4/0x200
[ 1323.567555] ? vga_switcheroo_set_dynamic_switch+0x80/0x80
[ 1323.567581] rpm_callback+0x24/0x80
[ 1323.567600] ? vga_switcheroo_set_dynamic_switch+0x80/0x80
[ 1323.567624] rpm_resume+0x4e3/0x7d0
[ 1323.567643] pm_runtime_work+0x55/0xa0
[ 1323.567663] process_one_work+0x1e7/0x410
[ 1323.567686] worker_thread+0x4b/0x420
[ 1323.567706] kthread+0x125/0x140
[ 1323.567724] ? process_one_work+0x410/0x410
[ 1323.567744] ? kthread_create_on_node+0x70/0x70
[ 1323.567768] ret_from_fork+0x1f/0x30
[ 1323.567794] Code: 8b 04 25 28 00 00 00 48 89 45 e0 31 c0 f3 48 ab 49 8b 7d 00 89 f0 0f b6 b0 20 d0 6b c0 48 8b 07 ff 50 70 85 c0 75 42 0f b7 45 b2 <66> 44 89 23 48 c7 43 0c 00 00 00 00 66 89 43 02 48 8b 45 c0 48
[ 1323.567944] RIP: smu7_populate_single_firmware_entry.isra.4+0x55/0xd0 [amdgpu] RSP: ffff996a43e9b808
[ 1323.567983] CR2: ffff998641194fec
[ 1323.568607] done.
[ 1323.579097] ---[ end trace 08a7897802c66d8f ]---

If it can help, here is a complete copy of dmesg while standing by and waking up :

[ 1316.534615] atkbd serio0: Unknown key pressed (translated set 2, code 0x85 on isa0060/serio0).
[ 1316.534624] atkbd serio0: Use 'setkeycodes e005 <keycode>' to make it known.
[ 1316.681765] wlp3s0: deauthenticating from 90:4d:4a:b4:67:45 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1316.689179] wlp3s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
[ 1318.360375] PM: Syncing filesystems ... done.
[ 1318.476981] PM: Preparing system for sleep (mem)
[ 1318.495129] Freezing user space processes ... (elapsed 0.171 seconds) done.
[ 1318.666320] OOM killer disabled.
[ 1318.666323] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[ 1318.668788] PM: Suspending system (mem)
[ 1318.668911] Suspending console(s) (use no_console_suspend to debug)
[ 1318.671106] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1318.671276] sd 0:0:0:0: [sda] Stopping disk
[ 1319.378052] PM: suspend of devices complete after 708.709 msecs
[ 1319.397645] PM: late suspend of devices complete after 19.589 msecs
[ 1319.443899] PM: noirq suspend of devices complete after 46.258 msecs
[ 1319.445144] ACPI: Preparing to enter system sleep state S3
[ 1319.450153] ACPI: EC: event blocked
[ 1319.450155] ACPI: EC: EC stopped
[ 1319.450158] PM: Saving platform NVS memory
[ 1319.450205] Disabling non-boot CPUs ...
[ 1319.467598] smpboot: CPU 1 is now offline
[ 1319.486460] IRQ 120: no longer affine to CPU2
[ 1319.486467] IRQ 121: no longer affine to CPU2
[ 1319.486471] IRQ 122: no longer affine to CPU2
[ 1319.486478] IRQ 125: no longer affine to CPU2
[ 1319.486491] IRQ 128: no longer affine to CPU2
[ 1319.486497] IRQ 131: no longer affine to CPU2
[ 1319.488776] smpboot: CPU 2 is now offline
[ 1319.510210] IRQ 1: no longer affine to CPU3
[ 1319.510224] IRQ 8: no longer affine to CPU3
[ 1319.510229] IRQ 9: no longer affine to CPU3
[ 1319.510243] IRQ 12: no longer affine to CPU3
[ 1319.511310] smpboot: CPU 3 is now offline
[ 1319.515059] ACPI: Low-level resume complete
[ 1319.515173] ACPI: EC: EC started
[ 1319.515173] PM: Restoring platform NVS memory
[ 1319.515897] Suspended for 52.403 seconds
[ 1319.515959] Enabling non-boot CPUs ...
[ 1319.516031] x86: Booting SMP configuration:
[ 1319.516032] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 1319.517487] microcode: microcode updated early to revision 0xba, date = 2017-04-09
[ 1319.517702] cache: parent cpu1 should not be sleeping
[ 1319.517786] microcode: sig=0x406e3, pf=0x80, revision=0xba
[ 1319.517857] CPU1 is up
[ 1319.517882] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 1319.519610] cache: parent cpu2 should not be sleeping
[ 1319.519814] CPU2 is up
[ 1319.519842] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 1319.521588] cache: parent cpu3 should not be sleeping
[ 1319.521866] CPU3 is up
[ 1319.524957] ACPI: Waking up from system sleep state S3
[ 1322.127654] PM: noirq resume of devices complete after 42.383 msecs
[ 1322.133224] PM: early resume of devices complete after 5.500 msecs
[ 1322.134195] sd 0:0:0:0: [sda] Starting disk
[ 1322.151659] r8169 0000:02:00.0 enp2s0: link down
[ 1322.201248] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout
[ 1322.220369] xhci_hcd 0000:00:14.0: port 6 resume PLC timeout
[ 1322.238285] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[ 1322.240776] pciehp 0000:00:1d.0:pcie004: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add
[ 1322.240777] pciehp 0000:00:1d.0:pcie004: Cannot add device at 0000:04:00
[ 1322.449590] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1322.449635] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1322.449672] ata3: SATA link down (SStatus 4 SControl 300)
[ 1322.465114] ata2.00: configured for UDMA/133
[ 1322.476977] usb 1-6: reset high-speed USB device number 3 using xhci_hcd
[ 1322.597288] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[ 1322.597296] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1322.598517] ata1.00: ACPI cmd f5/00:00:00:00:00:e0 (SECURITY FREEZE LOCK) filtered out
[ 1322.598525] ata1.00: ACPI cmd b1/c1:00:00:00:00:e0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1322.598664] ata1.00: configured for UDMA/133
[ 1322.737224] usb 1-7: reset full-speed USB device number 4 using xhci_hcd
[ 1322.997208] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
[ 1323.216950] [drm] RC6 on
[ 1323.416576] ACPI: EC: event unblocked
[ 1323.530356] PM: resume of devices complete after 1397.529 msecs
[ 1323.531475] usb 1-7:1.0: rebind failed: -517
[ 1323.531484] usb 1-7:1.1: rebind failed: -517
[ 1323.532638] acpi LNXPOWER:18: Turning OFF
[ 1323.532806] acpi LNXPOWER:17: Turning OFF
[ 1323.532982] acpi LNXPOWER:16: Turning OFF
[ 1323.533140] acpi LNXPOWER:15: Turning OFF
[ 1323.533282] acpi LNXPOWER:14: Turning OFF
[ 1323.533424] acpi LNXPOWER:13: Turning OFF
[ 1323.533569] acpi LNXPOWER:12: Turning OFF
[ 1323.533710] acpi LNXPOWER:11: Turning OFF
[ 1323.533853] acpi LNXPOWER:10: Turning OFF
[ 1323.533994] acpi LNXPOWER:0f: Turning OFF
[ 1323.534136] acpi LNXPOWER:0e: Turning OFF
[ 1323.534278] acpi LNXPOWER:0d: Turning OFF
[ 1323.535336] acpi LNXPOWER:0b: Turning OFF
[ 1323.535495] acpi LNXPOWER:0a: Turning OFF
[ 1323.535640] acpi LNXPOWER:09: Turning OFF
[ 1323.535783] acpi LNXPOWER:08: Turning OFF
[ 1323.535927] acpi LNXPOWER:07: Turning OFF
[ 1323.536069] acpi LNXPOWER:06: Turning OFF
[ 1323.536212] acpi LNXPOWER:05: Turning OFF
[ 1323.536412] acpi LNXPOWER:04: Turning OFF
[ 1323.536599] PM: Finishing wakeup.
[ 1323.536602] OOM killer enabled.
[ 1323.536604] Restarting tasks ...
[ 1323.548152] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 1323.548155] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 1323.563517] [drm] PCIE GART of 3072M enabled (table at 0x0000000000040000).
[ 1323.565769] BUG: unable to handle kernel paging request at ffff998641194fec
[ 1323.565858] IP: smu7_populate_single_firmware_entry.isra.4+0x55/0xd0 [amdgpu]
[ 1323.565893] PGD 0
[ 1323.565893] P4D 0

[ 1323.565929] Oops: 0002 [#1] SMP PTI
[ 1323.565950] Modules linked in: rfcomm pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) ccm bnep binfmt_misc nls_iso8859_1 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm irqbypass crct10dif_pclmul uvcvideo crc32_pclmul snd_hda_codec_hdmi videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev ghash_clmulni_intel snd_hda_codec_conexant snd_hda_codec_generic pcbc media aesni_intel aes_x86_64 snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc crypto_simd snd_soc_sst_dsp btusb btrtl btbcm btintel bluetooth glue_helper ecdh_generic snd_hda_ext_core snd_soc_sst_match cryptd arc4 snd_soc_core snd_compress intel_cstate ac97_bus iwlmvm mac80211 intel_rapl_perf snd_pcm_dmaengine snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep rtsx_pci_ms memstick snd_pcm iwlwifi joydev
[ 1323.566298] input_leds serio_raw hp_wmi snd_seq_midi snd_seq_midi_event cfg80211 wmi_bmof sparse_keymap snd_rawmidi snd_seq snd_seq_device snd_timer snd soundcore hp_accel shpchp mei_me lis3lv02d input_polldev acpi_pad tpm_infineon intel_pch_thermal mac_hid hp_wireless mei parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid amdkfd amd_iommu_v2 amdgpu rtsx_pci_sdmmc i915 psmouse ttm i2c_algo_bit drm_kms_helper syscopyarea rtsx_pci r8169 sysfillrect mii sysimgblt fb_sys_fops ahci drm libahci wmi video
[ 1323.566542] CPU: 0 PID: 3958 Comm: kworker/0:3 Tainted: G OE 4.13.0-25-generic #29-Ubuntu
[ 1323.566583] Hardware name: HP HP ProBook 470 G3/8102, BIOS N78 Ver. 01.19 10/17/2017
[ 1323.566625] Workqueue: pm pm_runtime_work
[ 1323.566647] task: ffff889f24f3df00 task.stack: ffff996a43e98000
[ 1323.566713] RIP: 0010:smu7_populate_single_firmware_entry.isra.4+0x55/0xd0 [amdgpu]
[ 1323.566750] RSP: 0018:ffff996a43e9b808 EFLAGS: 00010246
[ 1323.566776] RAX: 000000000000007e RBX: ffff998641194fec RCX: 000000008003d000
[ 1323.566811] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff889febceec80
[ 1323.566844] RBP: ffff996a43e9b858 R08: ffff889feb920000 R09: 0000000000033930
[ 1323.566878] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003
[ 1323.566910] R13: ffff889fecb95048 R14: ffff889feb0dc000 R15: 00000000000005fe
[ 1323.566946] FS: 0000000000000000(0000) GS:ffff88a000400000(0000) knlGS:0000000000000000
[ 1323.566984] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1323.567013] CR2: ffff998641194fec CR3: 00000000b280a003 CR4: 00000000003606f0
[ 1323.567047] Call Trace:
[ 1323.567103] smu7_request_smu_load_fw+0xab/0x320 [amdgpu]
[ 1323.567163] iceland_start_smu+0x39/0x70 [amdgpu]
[ 1323.567216] pp_resume+0xa9/0x120 [amdgpu]
[ 1323.567288] amdgpu_pp_resume+0x22/0x30 [amdgpu]
[ 1323.567333] amdgpu_resume_phase2+0x45/0xb0 [amdgpu]
[ 1323.567378] amdgpu_device_resume+0x13b/0x420 [amdgpu]
[ 1323.567408] ? __pci_set_master+0x34/0xe0
[ 1323.567429] ? vga_switcheroo_set_dynamic_switch+0x80/0x80
[ 1323.567468] amdgpu_pmops_runtime_resume+0x76/0xc0 [amdgpu]
[ 1323.567492] pci_pm_runtime_resume+0x7a/0xa0
[ 1323.567513] vga_switcheroo_runtime_resume+0x4d/0x50
[ 1323.567536] __rpm_callback+0xc4/0x200
[ 1323.567555] ? vga_switcheroo_set_dynamic_switch+0x80/0x80
[ 1323.567581] rpm_callback+0x24/0x80
[ 1323.567600] ? vga_switcheroo_set_dynamic_switch+0x80/0x80
[ 1323.567624] rpm_resume+0x4e3/0x7d0
[ 1323.567643] pm_runtime_work+0x55/0xa0
[ 1323.567663] process_one_work+0x1e7/0x410
[ 1323.567686] worker_thread+0x4b/0x420
[ 1323.567706] kthread+0x125/0x140
[ 1323.567724] ? process_one_work+0x410/0x410
[ 1323.567744] ? kthread_create_on_node+0x70/0x70
[ 1323.567768] ret_from_fork+0x1f/0x30
[ 1323.567794] Code: 8b 04 25 28 00 00 00 48 89 45 e0 31 c0 f3 48 ab 49 8b 7d 00 89 f0 0f b6 b0 20 d0 6b c0 48 8b 07 ff 50 70 85 c0 75 42 0f b7 45 b2 <66> 44 89 23 48 c7 43 0c 00 00 00 00 66 89 43 02 48 8b 45 c0 48
[ 1323.567944] RIP: smu7_populate_single_firmware_entry.isra.4+0x55/0xd0 [amdgpu] RSP: ffff996a43e9b808
[ 1323.567983] CR2: ffff998641194fec
[ 1323.568607] done.
[ 1323.579097] ---[ end trace 08a7897802c66d8f ]---
[ 1323.876815] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 1323.966359] thermal thermal_zone7: failed to read out thermal zone (-5)
[ 1324.245163] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1324.262886] r8169 0000:02:00.0 enp2s0: link down
[ 1324.262973] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1324.263682] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1324.324672] psmouse serio3: synaptics: queried max coordinates: x [..5716], y [..4886]
[ 1324.356122] psmouse serio3: synaptics: queried min coordinates: x [1220..], y [986..]
[ 1324.373309] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1324.451718] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 1328.838183] wlp3s0: authenticate with 90:4d:4a:b4:67:45
[ 1328.842152] wlp3s0: send auth to 90:4d:4a:b4:67:45 (try 1/3)
[ 1328.849666] wlp3s0: authenticated
[ 1328.850848] wlp3s0: associate with 90:4d:4a:b4:67:45 (try 1/3)
[ 1328.853832] wlp3s0: RX AssocResp from 90:4d:4a:b4:67:45 (capab=0x1511 status=0 aid=98)
[ 1328.855519] wlp3s0: associated
[ 1328.855659] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 1328.951463] wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 90:4d:4a:b4:67:45

Revision history for this message
Launchpad Janitor (janitor) said : 		#6

This question was expired because it remained in the 'Open' state without activity for the last 15 days.