Ubuntu

Stuck on Boot - Maybe ATI card related

Asked by Kiyo

I Just installed Ubuntu 7.04 and I can only get it to boot in single user or failsafe terminal. X boots fine in single user.

In all other startups I get stuck with only a background and a working cursor after the login screen.

The log file (below) makes me think it might be graphics card (Radeon 9000, it's for a laptop) related.

Does anyone have any suggestions? details answers are appreciated as I'm pretty new to the whole linux thing.

Xorg.0.log (there was also a Xorg.0.log.old but I won't post):

X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux Ubuntu
Current Operating System: Linux Schrodinger 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686
Build Date: 04 April 2007
 Before reporting problems, check http://wiki.x.org
 to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun May 13 00:44:30 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Generic Monitor"
(**) | |-->Device "ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP]"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(**) |-->Input Device "Synaptics Touchpad"
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
 Entry deleted from font path.
(**) FontPath set to:
 /usr/share/fonts/X11/misc,
 /usr/share/fonts/X11/100dpi/:unscaled,
 /usr/share/fonts/X11/75dpi/:unscaled,
 /usr/share/fonts/X11/Type1,
 /usr/share/fonts/X11/100dpi,
 /usr/share/fonts/X11/75dpi,
 /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
 /usr/share/fonts/X11/misc,
 /usr/X11R6/lib/X11/fonts/misc,
 /usr/share/fonts/X11/cyrillic,
 /usr/share/fonts/X11/100dpi/:unscaled,
 /usr/share/fonts/X11/75dpi/:unscaled,
 /usr/share/fonts/X11/Type1,
 /usr/X11R6/lib/X11/fonts/Type1,
 /usr/share/fonts/X11/100dpi,
 /usr/share/fonts/X11/75dpi,
 /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c92e0
(II) Module ABI versions:
 X.Org ANSI C Emulation: 0.3
 X.Org Video Driver: 1.1
 X.Org XInput driver : 0.7
 X.Org Server Extension : 0.3
 X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 1.0.0
 ABI class: X.Org Video Driver, version 1.1
(--) using VT number 2

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1002,5831 card 1179,ff00 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1002,5838 card 1179,ff00 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:13:0: chip 1002,4347 card 1179,ff00 rev 01 class 0c,03,10 hdr 80
(II) PCI: 00:13:1: chip 1002,4348 card 1179,ff00 rev 01 class 0c,03,10 hdr 00
(II) PCI: 00:13:2: chip 1002,4345 card 1179,ff00 rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:14:0: chip 1002,4353 card 1179,ff00 rev 18 class 0c,05,00 hdr 80
(II) PCI: 00:14:1: chip 1002,4349 card 1179,ff00 rev 00 class 01,01,8a hdr 00
(II) PCI: 00:14:3: chip 1002,434c card 1179,ff00 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:14:4: chip 1002,4342 card 0000,0000 rev 00 class 06,04,01 hdr 81
(II) PCI: 00:14:5: chip 1002,4341 card 1179,ff01 rev 00 class 04,01,00 hdr 80
(II) PCI: 00:14:6: chip 1002,434d card 1179,0001 rev 01 class 07,03,00 hdr 80
(II) PCI: 01:05:0: chip 1002,5835 card 1179,ff02 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 104c,8026 card 1179,ff00 rev 00 class 0c,00,10 hdr 00
(II) PCI: 02:02:0: chip 168c,0013 card 144f,7064 rev 01 class 02,00,00 hdr 00
(II) PCI: 02:03:0: chip 10ec,8139 card 1179,ff00 rev 10 class 02,00,00 hdr 00
(II) PCI: 02:04:0: chip 1524,1411 card a400,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:04:1: chip 1524,0530 card 1179,ff00 rev 00 class 05,01,00 hdr 80
(II) PCI: 02:04:2: chip 1524,0550 card 1179,ff01 rev 00 class 08,05,01 hdr 80
(II) PCI: 02:04:3: chip 1524,0520 card 1179,ff00 rev 00 class 05,01,00 hdr 80
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
 [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
 [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
 [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
 [0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
 [1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
 [2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B]
 [3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
 [0] -1 0 0xe8100000 - 0xe81fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
 [0] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:20:4), (0,2,4), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 2 I/O range:
 [0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
 [0] -1 0 0xe8200000 - 0xe82fffff (0x100000) MX[B]
(II) Bus 2 prefetchable memory range:
 [0] -1 0 0x30000000 - 0x33ffffff (0x4000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:4:0), (2,3,3), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 3 I/O range:
 [0] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
 [1] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
(II) Bus 3 prefetchable memory range:
 [0] -1 0 0x30000000 - 0x33ffffff (0x4000000) MX[B]
(--) PCI:*(1:5:0) ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP] rev 0, Mem @ 0xf0000000/27, 0xe8100000/16, I/O @ 0x9000/8
(II) Addressable bus resource ranges are
 [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
 [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
 [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xea000000 from 0xebffffff to 0xe9ffffff
(II) PCI Memory resource overlap reduced 0xe8000000 from 0xe8000fff to 0xe7ffffff
(II) Active PCI resource ranges:
 [0] -1 0 0xe8215400 - 0xe821547f (0x80) MX[B]
 [1] -1 0 0xe8215000 - 0xe82150ff (0x100) MX[B]
 [2] -1 0 0xe8214c00 - 0xe8214c7f (0x80) MX[B]
 [3] -1 0 0xe8214800 - 0xe82148ff (0x100) MX[B]
 [4] -1 0 0xe8200000 - 0xe820ffff (0x10000) MX[B]
 [5] -1 0 0xe8210000 - 0xe8213fff (0x4000) MX[B]
 [6] -1 0 0xe8214000 - 0xe82147ff (0x800) MX[B]
 [7] -1 0 0xe8004800 - 0xe80048ff (0x100) MX[B]
 [8] -1 0 0xe8004400 - 0xe80044ff (0x100) MX[B]
 [9] -1 0 0xe8004000 - 0xe80043ff (0x400) MX[B]
 [10] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B]
 [11] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
 [12] -1 0 0xe8001000 - 0xe8001fff (0x1000) MX[B]
 [13] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
 [14] -1 0 0xea000000 - 0xe9ffffff (0x0) MX[B]O
 [15] -1 0 0xe8100000 - 0xe810ffff (0x10000) MX[B](B)
 [16] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
 [17] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
 [18] -1 0 0x00008070 - 0x0000807f (0x10) IX[B]
 [19] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
 [20] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
 [21] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
 [22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
 [23] -1 0 0x00008060 - 0x0000806f (0x10) IX[B]
 [24] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
 [0] -1 0 0xe8215400 - 0xe821547f (0x80) MX[B]
 [1] -1 0 0xe8215000 - 0xe82150ff (0x100) MX[B]
 [2] -1 0 0xe8214c00 - 0xe8214c7f (0x80) MX[B]
 [3] -1 0 0xe8214800 - 0xe82148ff (0x100) MX[B]
 [4] -1 0 0xe8200000 - 0xe820ffff (0x10000) MX[B]
 [5] -1 0 0xe8210000 - 0xe8213fff (0x4000) MX[B]
 [6] -1 0 0xe8214000 - 0xe82147ff (0x800) MX[B]
 [7] -1 0 0xe8004800 - 0xe80048ff (0x100) MX[B]
 [8] -1 0 0xe8004400 - 0xe80044ff (0x100) MX[B]
 [9] -1 0 0xe8004000 - 0xe80043ff (0x400) MX[B]
 [10] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B]
 [11] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
 [12] -1 0 0xe8001000 - 0xe8001fff (0x1000) MX[B]
 [13] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
 [14] -1 0 0xea000000 - 0xe9ffffff (0x0) MX[B]O
 [15] -1 0 0xe8100000 - 0xe810ffff (0x10000) MX[B](B)
 [16] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
 [17] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
 [18] -1 0 0x00008070 - 0x0000807f (0x10) IX[B]
 [19] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
 [20] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
 [21] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
 [22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
 [23] -1 0 0x00008060 - 0x0000806f (0x10) IX[B]
 [24] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
 [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
 [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [4] -1 0 0xe8215400 - 0xe821547f (0x80) MX[B]
 [5] -1 0 0xe8215000 - 0xe82150ff (0x100) MX[B]
 [6] -1 0 0xe8214c00 - 0xe8214c7f (0x80) MX[B]
 [7] -1 0 0xe8214800 - 0xe82148ff (0x100) MX[B]
 [8] -1 0 0xe8200000 - 0xe820ffff (0x10000) MX[B]
 [9] -1 0 0xe8210000 - 0xe8213fff (0x4000) MX[B]
 [10] -1 0 0xe8214000 - 0xe82147ff (0x800) MX[B]
 [11] -1 0 0xe8004800 - 0xe80048ff (0x100) MX[B]
 [12] -1 0 0xe8004400 - 0xe80044ff (0x100) MX[B]
 [13] -1 0 0xe8004000 - 0xe80043ff (0x400) MX[B]
 [14] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B]
 [15] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
 [16] -1 0 0xe8001000 - 0xe8001fff (0x1000) MX[B]
 [17] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
 [18] -1 0 0xea000000 - 0xe9ffffff (0x0) MX[B]O
 [19] -1 0 0xe8100000 - 0xe810ffff (0x10000) MX[B](B)
 [20] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
 [21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
 [23] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
 [24] -1 0 0x00008070 - 0x0000807f (0x10) IX[B]
 [25] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
 [26] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
 [27] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
 [28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
 [29] -1 0 0x00008060 - 0x0000806f (0x10) IX[B]
 [30] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules//libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 1.2.0
 ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 1.0.0
 ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 1.0.0
 ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 1.0.0
 Module class: X.Org Server Extension
 ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
 compiled for 7.2.0, module version = 2.1.0
 Module class: X.Org Font Renderer
 ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 1.0.0
 ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 1.0.0
 ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 1.1.0
 ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 6.6.3
 Module class: X.Org Video Driver
 ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 1.1.0
 Module class: X.Org XInput Driver
 ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 1.1.1
 Module class: X.Org XInput Driver
 ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
 compiled for 4.3.99.902, module version = 1.0.0
 Module class: X.Org XInput Driver
 ABI class: X.Org XInput driver, version 0.7
(II) Wacom driver level: 47-0.7.7-7 $
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="The XFree86 Project"
 compiled for 4.2.0, module version = 1.0.0
 Module class: XFree86 XInput Driver
 ABI class: XFree86 XInput driver, version 0.3
(II) ATI: ATI driver (version 6.6.3) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
 ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
 ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
 ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
 ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
 ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
 ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
 ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
 ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
 ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
 ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
 ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
 ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
 ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
 ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
 ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
 ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
 ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
 ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
 ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
 ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
 ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
 ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
 ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
 ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
 ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
 ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
 ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
 ATI Radeon Mobility M7 LW (AGP),
 ATI Mobility FireGL 7800 M7 LX (AGP),
 ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
 ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
 ATI Radeon IGP330/340/350 (A4) 4137,
 ATI Radeon IGP330M/340M/350M (U2) 4337,
 ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
 ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
 ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
 ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
 ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
 ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
 ATI Radeon Mobility 9000 (M9) Lf (AGP),
 ATI Radeon Mobility 9000 (M9) Lg (AGP),
 ATI Radeon 9100 IGP (A5) 5834,
 ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
 ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
 ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
 ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
 ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
 ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
 ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
 ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
 ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
 ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
 ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
 ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
 ATI FireGL RV360 AV (AGP),
 ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
 ATI Radeon Mobility 9600 (M10) NQ (AGP),
 ATI Radeon Mobility 9600 (M11) NR (AGP),
 ATI Radeon Mobility 9600 (M10) NS (AGP),
 ATI FireGL Mobility T2 (M10) NT (AGP),
 ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
 ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
 ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
 ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
 ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
 ATI Radeon X600 (RV380) 3E50 (PCIE),
 ATI FireGL V3200 (RV380) 3E54 (PCIE),
 ATI Radeon Mobility X600 (M24) 3150 (PCIE),
 ATI Radeon Mobility X300 (M24) 3152 (PCIE),
 ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
 ATI Radeon X600 (RV370) 5B62 (PCIE),
 ATI Radeon X550 (RV370) 5B63 (PCIE),
 ATI FireGL V3100 (RV370) 5B64 (PCIE),
 ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
 ATI Radeon Mobility X300 (M22) 5460 (PCIE),
 ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
 ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
 ATI Radeon XPRESS 200M 5A42 (PCIE),
 ATI Radeon XPRESS 200 5A61 (PCIE),
 ATI Radeon XPRESS 200M 5A62 (PCIE),
 ATI Radeon XPRESS 200 5954 (PCIE),
 ATI Radeon XPRESS 200M 5955 (PCIE),
 ATI Radeon XPRESS 200 5974 (PCIE),
 ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
 ATI Mobility FireGL V5000 (M26) (PCIE),
 ATI Mobility FireGL V5000 (M26) (PCIE),
 ATI Mobility Radeon X700 XL (M26) (PCIE),
 ATI Mobility Radeon X700 (M26) (PCIE),
 ATI Mobility Radeon X700 (M26) (PCIE),
 ATI Radeon X700 PRO (RV410) (PCIE),
 ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
 ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
 ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
 ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
 ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
 ATI Radeon Mobility 9800 (M18) JN (AGP),
 ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
 ATI Radeon AIW X800 VE (R420) JT (AGP),
 ATI Radeon X800 (R423) UH (PCIE),
 ATI Radeon X800PRO (R423) UI (PCIE),
 ATI Radeon X800LE (R423) UJ (PCIE),
 ATI Radeon X800SE (R423) UK (PCIE),
 ATI FireGL V5100 (R423) UQ (PCIE),
 ATI FireGL unknown (R423) UR (PCIE),
 ATI FireGL unknown (R423) UT (PCIE),
 ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
 ATI Mobility FireGL V5100 (M28) (PCIE),
 ATI Mobility Radeon X800 (M28) (PCIE),
 ATI Mobility Radeon X800 XT (M28) (PCIE),
 ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
 ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
 ATI Radeon X850 5D4C (PCIE),
 ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
 ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
 ATI Radeon X850 XT (R480) (PCIE),
 ATI Radeon X850 XT PE (R480) (PCIE),
 ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
 ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 01:05:0
(II) ATI: Candidate "Device" section "ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP]".
(--) Chipset ATI Radeon Mobility 9100 IGP (U3) 5835 found
(II) resource ranges after xf86ClaimFixedResources() call:
 [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [4] -1 0 0xe8215400 - 0xe821547f (0x80) MX[B]
 [5] -1 0 0xe8215000 - 0xe82150ff (0x100) MX[B]
 [6] -1 0 0xe8214c00 - 0xe8214c7f (0x80) MX[B]
 [7] -1 0 0xe8214800 - 0xe82148ff (0x100) MX[B]
 [8] -1 0 0xe8200000 - 0xe820ffff (0x10000) MX[B]
 [9] -1 0 0xe8210000 - 0xe8213fff (0x4000) MX[B]
 [10] -1 0 0xe8214000 - 0xe82147ff (0x800) MX[B]
 [11] -1 0 0xe8004800 - 0xe80048ff (0x100) MX[B]
 [12] -1 0 0xe8004400 - 0xe80044ff (0x100) MX[B]
 [13] -1 0 0xe8004000 - 0xe80043ff (0x400) MX[B]
 [14] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B]
 [15] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
 [16] -1 0 0xe8001000 - 0xe8001fff (0x1000) MX[B]
 [17] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
 [18] -1 0 0xea000000 - 0xe9ffffff (0x0) MX[B]O
 [19] -1 0 0xe8100000 - 0xe810ffff (0x10000) MX[B](B)
 [20] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
 [21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
 [23] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
 [24] -1 0 0x00008070 - 0x0000807f (0x10) IX[B]
 [25] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
 [26] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
 [27] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
 [28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
 [29] -1 0 0x00008060 - 0x0000806f (0x10) IX[B]
 [30] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 4.2.0
 Module class: X.Org Video Driver
 ABI class: X.Org Video Driver, version 1.1
(II) resource ranges after probing:
 [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [4] -1 0 0xe8215400 - 0xe821547f (0x80) MX[B]
 [5] -1 0 0xe8215000 - 0xe82150ff (0x100) MX[B]
 [6] -1 0 0xe8214c00 - 0xe8214c7f (0x80) MX[B]
 [7] -1 0 0xe8214800 - 0xe82148ff (0x100) MX[B]
 [8] -1 0 0xe8200000 - 0xe820ffff (0x10000) MX[B]
 [9] -1 0 0xe8210000 - 0xe8213fff (0x4000) MX[B]
 [10] -1 0 0xe8214000 - 0xe82147ff (0x800) MX[B]
 [11] -1 0 0xe8004800 - 0xe80048ff (0x100) MX[B]
 [12] -1 0 0xe8004400 - 0xe80044ff (0x100) MX[B]
 [13] -1 0 0xe8004000 - 0xe80043ff (0x400) MX[B]
 [14] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B]
 [15] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
 [16] -1 0 0xe8001000 - 0xe8001fff (0x1000) MX[B]
 [17] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
 [18] -1 0 0xea000000 - 0xe9ffffff (0x0) MX[B]O
 [19] -1 0 0xe8100000 - 0xe810ffff (0x10000) MX[B](B)
 [20] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
 [21] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
 [22] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
 [23] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
 [24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [25] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
 [26] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
 [27] -1 0 0x00008070 - 0x0000807f (0x10) IX[B]
 [28] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
 [29] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
 [30] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
 [31] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
 [32] -1 0 0x00008060 - 0x0000806f (0x10) IX[B]
 [33] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
 [34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
 [35] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) RADEON(0): RADEONPreInit
(II) RADEON(0): MMIO registers at 0xe8100000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 0.1.0
 ABI class: X.Org Video Driver, version 1.1
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) RADEON(0): Assuming overlay scaler buffer width is 1536
(++) RADEON(0): "-dpi 100" given in command line, assuming "ConstantDPI" set
(++) RADEON(0): X server will keep DPI constant for all screen sizes
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) RADEON(0): initializing int10
(II) Loading sub module "vm86"
(II) LoadModule: "vm86"
(II) Loading /usr/lib/xorg/modules//libvm86.so
(II) Module vm86: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 1.0.0
 ABI class: X.Org Video Driver, version 1.1
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon Mobility 9100 IGP (U3) 5835" (ChipID = 0x5835)
(--) RADEON(0): Linear framebuffer at 0xf0000000
(II) RADEON(0): AGP card detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.25.0
(II) RADEON(0): AGP Fast Write disabled by default
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 1.0.0
 ABI class: X.Org ANSI C Emulation, version 0.3
(II) RADEON(0): Page flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=65536K, accessible=65536K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules//libddc.so
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Reloading /usr/lib/xorg/modules//libi2c.so
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): LVDS port is not in connector table, added in.
(WW) RADEON(0): Unknown DDCType 5 found
(WW) RADEON(0): LCD DDC Info Table found!
(II) RADEON(0): Connector0: DDCType-0, DACType-1, TMDSType--1, ConnectorType-1
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): VBE DDC probing on port 1 :::
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): VESA BIOS detected
(II) RADEON(0): VESA VBE Version 2.0
(II) RADEON(0): VESA VBE Total Mem: 266240 kB
(II) RADEON(0): VESA VBE OEM: ATI MOBILITY RADEON 9100 IGP
(II) RADEON(0): VESA VBE OEM Software Rev: 1.0
(II) RADEON(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) RADEON(0): VESA VBE OEM Product: MS3
(II) RADEON(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules//libddc.so
(II) RADEON(0): VESA VBE DDC supported
(II) RADEON(0): VESA VBE DDC Level 2
(II) RADEON(0): VESA VBE DDC transfer in appr. 2 sec.
(II) RADEON(0): VESA VBE DDC read successfully
(II) RADEON(0): DDC Type: 3, Detected Type: 2
(WW) RADEON(0): No valid DDCType is given for DDC2, try vbe probing ...
(II) RADEON(0): DDC Type: 0, Detected Type: 0
(II) RADEON(0): EDID data from the display on port 1 ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 1389 Serial#: 0
(II) RADEON(0): Year: 2004 Week: 24
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.600 redY: 0.340 greenX: 0.309 greenY: 0.559
(II) RADEON(0): blueX: 0.149 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.0 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1312 h_sync_end 1344 h_blank_end 1456 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 820 v_border: 0
(II) RADEON(0): CPT
(II) RADEON(0): CLAA154WA01
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e14891300000000
(II) RADEON(0): 180e0103802115780a806d99574f8f26
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101bc1b00b0502014302020
(II) RADEON(0): 13004bcf100000190000000f00202020
(II) RADEON(0): 2020202020a0ff023200000000fe0043
(II) RADEON(0): 50540a202020202020202020000000fe
(II) RADEON(0): 00434c4141313534574130310a2000a2
(II) RADEON(0):
(II) RADEON(0): Primary:
 Monitor -- LVDS
 Connector -- VGA
 DAC Type -- TVDAC/ExtDAC
 TMDS Type -- NONE
 DDC Type -- VGA_DDC
(II) RADEON(0): Secondary:
 Monitor -- NONE
 Connector -- Proprietary
 DAC Type -- Primary
 TMDS Type -- NONE
 DDC Type -- NONE
(II) RADEON(0): PLL parameters: rf=1432 rd=6 min=20000 max=35000; xclk=16662
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Panel ID string: CPT
(II) RADEON(0): Panel Size from BIOS: 1280x800
(II) RADEON(0): BIOS provided dividers will be used.
(II) RADEON(0): Valid Mode from Detailed timing table: 1280x800
(II) RADEON(0): Total of 1 mode(s) found.
(II) RADEON(0): Total number of valid DDC mode(s) found: 1
(II) RADEON(0): Valid mode using on-chip RMX: 1280x800
(II) RADEON(0): Total number of valid FP mode(s) found: 1
(--) RADEON(0): Virtual size is 1280x800 (pitch 1280)
(**) RADEON(0): *Mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 48.8 kHz, 59.5 Hz
(II) RADEON(0): Modeline "1280x800" 71.00 1280 1312 1344 1456 800 801 804 820
(**) RADEON(0): Default mode "640x350": 71.0 MHz (scaled from 0.0 MHz), 48.8 kHz, 59.5 Hz
(II) RADEON(0): Modeline "640x350" 71.00 640 1312 1344 1456 350 801 804 820
(**) RADEON(0): Default mode "640x400": 71.0 MHz (scaled from 0.0 MHz), 48.8 kHz, 59.5 Hz
(II) RADEON(0): Modeline "640x400" 71.00 640 1312 1344 1456 400 801 804 820
(**) RADEON(0): Default mode "720x400": 71.0 MHz (scaled from 0.0 MHz), 48.8 kHz, 59.5 Hz
(II) RADEON(0): Modeline "720x400" 71.00 720 1312 1344 1456 400 801 804 820
(**) RADEON(0): Default mode "640x480": 71.0 MHz (scaled from 0.0 MHz), 48.8 kHz, 59.5 Hz
(II) RADEON(0): Modeline "640x480" 71.00 640 1312 1344 1456 480 801 804 820
(**) RADEON(0): Default mode "800x600": 71.0 MHz (scaled from 0.0 MHz), 48.8 kHz, 59.5 Hz
(II) RADEON(0): Modeline "800x600" 71.00 800 1312 1344 1456 600 801 804 820
(**) RADEON(0): Default mode "1024x768": 71.0 MHz (scaled from 0.0 MHz), 48.8 kHz, 59.5 Hz
(II) RADEON(0): Modeline "1024x768" 71.00 1024 1312 1344 1456 768 801 804 820
(**) RADEON(0): Default mode "832x624": 71.0 MHz (scaled from 0.0 MHz), 48.8 kHz, 59.5 Hz
(II) RADEON(0): Modeline "832x624" 71.00 832 1312 1344 1456 624 801 804 820
(**) RADEON(0): Default mode "1280x768": 71.0 MHz (scaled from 0.0 MHz), 48.8 kHz, 59.5 Hz
(II) RADEON(0): Modeline "1280x768" 71.00 1280 1312 1344 1456 768 801 804 820
(**) RADEON(0): Default mode "1152x768": 71.0 MHz (scaled from 0.0 MHz), 48.8 kHz, 59.5 Hz
(II) RADEON(0): Modeline "1152x768" 71.00 1152 1312 1344 1456 768 801 804 820
(++) RADEON(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 1.0.0
 ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 0.1.0
 ABI class: X.Org Video Driver, version 1.1
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 1.2.0
 ABI class: X.Org Video Driver, version 1.1
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
 of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
 [0] 0 0 0xe8100000 - 0xe810ffff (0x10000) MX[B]
 [1] 0 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
 [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
 [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [6] -1 0 0xe8215400 - 0xe821547f (0x80) MX[B]
 [7] -1 0 0xe8215000 - 0xe82150ff (0x100) MX[B]
 [8] -1 0 0xe8214c00 - 0xe8214c7f (0x80) MX[B]
 [9] -1 0 0xe8214800 - 0xe82148ff (0x100) MX[B]
 [10] -1 0 0xe8200000 - 0xe820ffff (0x10000) MX[B]
 [11] -1 0 0xe8210000 - 0xe8213fff (0x4000) MX[B]
 [12] -1 0 0xe8214000 - 0xe82147ff (0x800) MX[B]
 [13] -1 0 0xe8004800 - 0xe80048ff (0x100) MX[B]
 [14] -1 0 0xe8004400 - 0xe80044ff (0x100) MX[B]
 [15] -1 0 0xe8004000 - 0xe80043ff (0x400) MX[B]
 [16] -1 0 0xe8003000 - 0xe8003fff (0x1000) MX[B]
 [17] -1 0 0xe8002000 - 0xe8002fff (0x1000) MX[B]
 [18] -1 0 0xe8001000 - 0xe8001fff (0x1000) MX[B]
 [19] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
 [20] -1 0 0xea000000 - 0xe9ffffff (0x0) MX[B]O
 [21] -1 0 0xe8100000 - 0xe810ffff (0x10000) MX[B](B)
 [22] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
 [23] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
 [24] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
 [25] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
 [26] 0 0 0x00009000 - 0x000090ff (0x100) IX[B]
 [27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [28] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
 [29] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
 [30] -1 0 0x00008070 - 0x0000807f (0x10) IX[B]
 [31] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
 [32] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
 [33] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
 [34] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
 [35] -1 0 0x00008060 - 0x0000806f (0x10) IX[B]
 [36] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
 [37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
 [38] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(**) RADEON(0): RADEONScreenInit f0000000 0
(**) RADEON(0): Map: 0xf0000000, 0x04000000
(==) RADEON(0): Write-combining range (0xf0000000,0x4000000)
(**) RADEON(0): RADEONSave
(**) RADEON(0): RADEONSaveMode(0x81f5cb0)
(**) RADEON(0): Read: 0x00180006 0x00020077 0x00000000
(**) RADEON(0): Read: rd=6, fd=119, pd=2
(**) RADEON(0): RADEONSaveMode returns 0x81f5cb0
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) RADEON(0): [drm] DRM interface version 1.3
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:05.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xdcbb4000
(II) RADEON(0): [drm] mapped SAREA 0xdcbb4000 to 0xb7cc3000
(II) RADEON(0): [drm] framebuffer handle = 0xf0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [agp] Mode 0x1f000209 [AGP 0x1002/0x5831; Card 0x1002/0x5835]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xea000000
(II) RADEON(0): [agp] Ring mapped at 0xb38c7000
(II) RADEON(0): [agp] ring read ptr handle = 0xea101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb38c6000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xea102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb36c6000
(II) RADEON(0): [agp] GART texture map handle = 0xea302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xb31e6000
(II) RADEON(0): [drm] register handle = 0xe8100000
(II) RADEON(0): [dri] Visual configs initialized
(**) RADEON(0): DRI New memory map param
(**) RADEON(0): RADEONInitMemoryMap() :
(**) RADEON(0): mem_size : 0x04000000
(**) RADEON(0): MC_FB_LOCATION : 0x1fff1c00
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): RADEONModeInit()
1280x800 71.00 1280 1312 1344 1456 800 801 804 820 (24,32)
1280x800 71.00 1280 1312 1344 1456 800 801 804 820 (24,32)
(**) RADEON(0): Pitch = 10485920 bytes (virtualX = 1280, displayWidth = 1280)
(II) RADEON(0): BIOS HotKeys Enabled
(**) RADEON(0): RADEONInit returns 0x81f6660
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x81f6660)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0x1fff1c00
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): GRPH_BUFFER_CNTL from 20027c7c to 20085c5c
(**) RADEON(0): RADEONSaveScreen(0)
(II) RADEON(0): Depth moves disabled by default
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): Setting up accel memmap
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,800) to (1280,802)
(II) RADEON(0): Largest offscreen area available: 1280 x 7389
(II) RADEON(0): Will use back buffer at offset 0x102c000
(II) RADEON(0): Will use depth buffer at offset 0x1414000
(II) RADEON(0): Will use 40960 kb for textures at offset 0x17fc000
(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(**) RADEON(0): DRI Finishing init !
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0x1fff1c00 is: 0x1fff1c00
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xea7fea00
(**) RADEON(0): GRPH_BUFFER_CNTL from 20027c7c to 20085c5c
(II) RADEON(0): Direct rendering enabled
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(II) RADEON(0): Render acceleration enabled
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 160
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
 Screen to screen bit blits
 Solid filled rectangles
 8x8 mono pattern filled rectangles
 Indirect CPU to Screen color expansion
 Solid Lines
 Scanline Image Writes
 Offscreen Pixmaps
 Setting up tile and stipple cache:
  32 128x128 slots
  32 256x256 slots
  16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): Initializing DPMS
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(**) RADEON(0): Initializing Cursor
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 802)
(II) RADEON(0): Largest offscreen area available: 1280 x 7385
(**) RADEON(0): Initializing color map
(**) RADEON(0): Initializing DGA
(**) RADEON(0): Initializing Xv
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
 compiled for 7.2.0, module version = 1.0.0
 ABI class: X.Org Video Driver, version 1.1
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(**) RADEON(0): RADEONScreenInit finished
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/r200_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Generic Keyboard: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/input/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/input/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/input/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event5
(**) Option "Device" "/dev/input/event5"
(**) Option "HorizScrollDelta" "0"
(--) Synaptics Touchpad touchpad found
(**) Option "SendCoreEvents" "true"
(**) Synaptics Touchpad: always reports core events
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: MOUSE)
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
 No such file or directory.
Error opening /dev/input/wacom : Invalid argument
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
 No such file or directory.
Error opening /dev/input/wacom : Invalid argument
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
 No such file or directory.
Error opening /dev/input/wacom : Invalid argument
Synaptics DeviceInit called
SynapticsCtrl called.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Synaptics DeviceOn called
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event5
(**) Option "Device" "/dev/input/event5"
(--) Synaptics Touchpad touchpad found
Could not init font path element /usr/X11R6/lib/X11/fonts/misc, removing from list!
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1, removing from list!
(**) RADEON(0): RADEONSaveScreen(2)
ProcXCloseDevice to close or not ?

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Solved by:
Cesare Tirabassi
Solved:
Last query:
Last reply:
Revision history for this message
Cesare Tirabassi (norsetto) said : 		#1

Actually, you Xorg log file doesn't hint to any problem with your video card.
I think we should find something more interesting in dmesg.

You can also have a look at the boot messages pressing ALT-F1 during boot.

Revision history for this message
Kiyo (kiyowmasui) said : 		#2

After pushing ctrl-alt-f1 on failed startup:

startup . . .

[ 8.34825].. MP-Bios bug: 8254 timer not connected to IO-APIC

Loading, please wait

Kinit: nave_to_dev_t(/dev/disk/by-uuind/[-bunch of numbers-]) = h

Kinit: trying to resume from /dev/disk/by-uunid/[-same numbers-]

Kinit: no resume image, doing normal boot

Ubuntu 7.04 [-etc .......

here is the other log . . .

/var/log/dmesg:

[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d0000 size: 0000000000008000 end: 00000000000d8000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001be70000 end: 000000001bf70000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001bf70000 size: 000000000000b000 end: 000000001bf7b000 type: 3
[ 0.000000] copy_e820_map() start: 000000001bf7b000 size: 0000000000005000 end: 000000001bf80000 type: 4
[ 0.000000] copy_e820_map() start: 000000001bf80000 size: 0000000000080000 end: 000000001c000000 type: 2
[ 0.000000] copy_e820_map() start: 000000002bf80000 size: 0000000000080000 end: 000000002c000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bf70000 (usable)
[ 0.000000] BIOS-e820: 000000001bf70000 - 000000001bf7b000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001bf7b000 - 000000001bf80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved)
[ 0.000000] BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 447MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f6ae0
[ 0.000000] Entering add_active_range(0, 0, 114544) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114544
[ 0.000000] HighMem 114544 -> 114544
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114544
[ 0.000000] On node 0 totalpages: 114544
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 862 pages used for memmap
[ 0.000000] Normal zone: 109586 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6b40
[ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1bf75ece
[ 0.000000] ACPI: FADT (v001 TOSCPL Chinook 0x06040000 ATI 0x00000003) @ 0x1bf7af32
[ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1bf7afa6
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x1bf76316
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x1bf76101
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x1bf75f06
[ 0.000000] ACPI: DSDT (v001 TOSCPL SB200 0x06040000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 2c000000:d2c00000)
[ 0.000000] Detected 2800.227 MHz processor.
[ 6.854973] Built 1 zonelists. Total pages: 113650
[ 6.854978] Kernel command line: root=UUID=4c56324c-f7a2-41e0-b43b-91fa88db979b ro single
[ 6.855139] mapped APIC to ffffd000 (fee00000)
[ 6.855142] mapped IOAPIC to ffffc000 (fec00000)
[ 6.855146] Enabling fast FPU save and restore... done.
[ 6.855149] Enabling unmasked SIMD FPU exception support... done.
[ 6.855167] Initializing CPU#0
[ 6.855265] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 6.856296] Console: colour VGA+ 80x25
[ 6.858713] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 6.859123] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 6.871421] Memory: 442944k/458176k available (1992k kernel code, 14668k reserved, 893k data, 328k init, 0k highmem)
[ 6.871479] virtual kernel memory layout:
[ 6.871480] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 6.871481] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 6.871482] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 6.871483] lowmem : 0xc0000000 - 0xdbf70000 ( 447 MB)
[ 6.871484] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 6.871485] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 6.871486] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 6.871747] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 6.951090] Calibrating delay using timer specific routine.. 5603.53 BogoMIPS (lpj=11207070)
[ 6.951199] Security Framework v1.0.0 initialized
[ 6.951238] SELinux: Disabled at boot.
[ 6.951286] Mount-cache hash table entries: 512
[ 6.951475] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[ 6.951488] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 6.951545] CPU: L2 cache: 512K
[ 6.951578] CPU: Hyper-Threading is disabled
[ 6.951612] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080 00004400 00000000 00000000
[ 6.951623] Compat vDSO mapped to ffffe000.
[ 6.951659] Remapping vsyscall page to ffffe000
[ 6.951703] Checking 'hlt' instruction... OK.
[ 6.967192] SMP alternatives: switching to UP code
[ 6.967453] Freeing SMP alternatives: 11k freed
[ 6.967709] Early unpacking initramfs... done
[ 7.252865] ACPI: Core revision 20060707
[ 7.279137] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 7.284766] CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
[ 7.284913] Total of 1 processors activated (5603.53 BogoMIPS).
[ 7.285013] ENABLING IO-APIC IRQs
[ 7.285223] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 7.324891] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 7.324925] ...trying to set up timer (IRQ0) through the 8259A ... failed.
[ 7.324982] ...trying to set up timer as Virtual Wire IRQ... works.
[ 7.470170] Brought up 1 CPUs
[ 7.470472] Booting paravirtualized kernel on bare hardware
[ 7.470573] Time: 13:55:15 Date: 04/13/107
[ 7.470639] NET: Registered protocol family 16
[ 7.470785] EISA bus registered
[ 7.470822] ACPI: bus type pci registered
[ 7.506179] PCI: PCI BIOS revision 2.10 entry at 0xfd958, last bus=2
[ 7.506214] PCI: Using configuration type 1
[ 7.506247] Setting up standard PCI resources
[ 7.531817] ACPI: Interpreter enabled
[ 7.531857] ACPI: Using IOAPIC for interrupt routing
[ 7.532479] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 7.532519] PCI: Probing PCI hardware (bus 00)
[ 7.533633] Boot video device is 0000:01:05.0
[ 7.534118] PCI: Transparent bridge - 0000:00:14.4
[ 7.534230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 7.536690] ACPI: PCI Interrupt Link [LNK0] (IRQs 10 11) *0, disabled.
[ 7.537070] ACPI: PCI Interrupt Link [LNK1] (IRQs 10 11) *0, disabled.
[ 7.537441] ACPI: PCI Interrupt Link [LNK2] (IRQs 10 11) *0, disabled.
[ 7.537817] ACPI: PCI Interrupt Link [LNK3] (IRQs 10 11) *0, disabled.
[ 7.582009] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 7.582916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 7.583335] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 7.583385] pnp: PnP ACPI init
[ 7.605977] pnp: PnP ACPI: found 11 devices
[ 7.606016] PnPBIOS: Disabled by ACPI PNP
[ 7.606113] PCI: Using ACPI for IRQ routing
[ 7.606148] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 7.611648] NET: Registered protocol family 8
[ 7.611681] NET: Registered protocol family 20
[ 7.611918] pnp: 00:07: ioport range 0x1080-0x1080 has been reserved
[ 7.611955] pnp: 00:07: ioport range 0x220-0x22f has been reserved
[ 7.611989] pnp: 00:07: ioport range 0x40b-0x40b has been reserved
[ 7.612024] pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 7.612377] PCI: Bridge: 0000:00:01.0
[ 7.612411] IO window: 9000-9fff
[ 7.612445] MEM window: e8100000-e81fffff
[ 7.612480] PREFETCH window: f0000000-f7ffffff
[ 7.612521] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[ 7.612554] IO window: 0000a400-0000a4ff
[ 7.612589] IO window: 0000a800-0000a8ff
[ 7.612625] PREFETCH window: 30000000-33ffffff
[ 7.612660] MEM window: 34000000-37ffffff
[ 7.612696] PCI: Bridge: 0000:00:14.4
[ 7.612729] IO window: a000-afff
[ 7.612763] MEM window: e8200000-e82fffff
[ 7.612798] PREFETCH window: 30000000-33ffffff
[ 7.612864] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 7.612963] NET: Registered protocol family 2
[ 7.645893] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 7.646034] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 7.646194] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 7.646285] TCP: Hash tables configured (established 16384 bind 8192)
[ 7.646321] TCP reno registered
[ 7.657905] checking if image is initramfs... it is
[ 8.222496] Freeing initrd memory: 6993k freed
[ 8.223086] audit: initializing netlink socket (disabled)
[ 8.223140] audit(1179064515.412:1): initialized
[ 8.223331] VFS: Disk quotas dquot_6.5.1
[ 8.223384] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 8.223475] io scheduler noop registered
[ 8.223530] io scheduler anticipatory registered
[ 8.223585] io scheduler deadline registered
[ 8.223645] io scheduler cfq registered (default)
[ 8.752000] isapnp: Scanning for PnP cards...
[ 9.104472] isapnp: No Plug & Play device found
[ 9.132993] Real Time Clock Driver v1.12ac
[ 9.133091] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 9.133417] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 9.134061] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[ 9.134135] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 9.134246] mice: PS/2 mouse device common for all mice
[ 9.134908] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 9.135302] input: Macintosh mouse button emulation as /class/input/input0
[ 9.135376] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 9.135413] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 9.135659] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 9.136736] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 9.136824] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.136863] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 9.136898] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 9.136932] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 9.136966] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 9.137184] EISA: Probing bus 0 at eisa.0
[ 9.137224] Cannot allocate resource for EISA slot 1
[ 9.137990] Cannot allocate resource for EISA slot 8
[ 9.138024] EISA: Detected 0 cards.
[ 9.168111] TCP cubic registered
[ 9.168150] NET: Registered protocol family 1
[ 9.168209] Using IPI No-Shortcut mode
[ 9.168313] ACPI: (supports S0 S3 S4 S5)
[ 9.168495] Magic number: 7:239:938
[ 9.169288] Freeing unused kernel memory: 328k freed
[ 9.170917] input: AT Translated Set 2 keyboard as /class/input/input1
[ 9.170969] Time: tsc clocksource has been installed.
[ 9.359038] Capability LSM initialized
[ 9.402821] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 9.402952] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 9.403037] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 9.968465] usbcore: registered new interface driver usbfs
[ 9.968531] usbcore: registered new interface driver hub
[ 9.968586] usbcore: registered new device driver usb
[ 9.981162] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.981230] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 9.981316] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 9.981603] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 9.981664] ohci_hcd 0000:00:13.0: irq 18, io mem 0xe8001000
[ 10.007903] SCSI subsystem initialized
[ 10.013556] libata version 2.20 loaded.
[ 10.041741] usb usb1: configuration #1 chosen from 1 choice
[ 10.041809] hub 1-0:1.0: USB hub found
[ 10.041854] hub 1-0:1.0: 3 ports detected
[ 10.066950] ieee1394: Initialized config rom entry `ip1394'
[ 10.084975] 8139too Fast Ethernet driver 0.9.28
[ 10.145360] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18
[ 10.145451] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 10.145508] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 10.145566] ohci_hcd 0000:00:13.1: irq 18, io mem 0xe8002000
[ 10.205739] usb usb2: configuration #1 chosen from 1 choice
[ 10.205818] hub 2-0:1.0: USB hub found
[ 10.205865] hub 2-0:1.0: 3 ports detected
[ 10.309093] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18
[ 10.309180] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 10.309249] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 10.309334] ehci_hcd 0000:00:13.2: irq 18, io mem 0xe8003000
[ 10.309374] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 10.309506] usb usb3: configuration #1 chosen from 1 choice
[ 10.309566] hub 3-0:1.0: USB hub found
[ 10.309605] hub 3-0:1.0: 6 ports detected
[ 2.876000] Time: acpi_pm clocksource has been installed.
[ 2.944000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 2.944000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 2.944000] ATIIXP: chipset revision 0
[ 2.944000] ATIIXP: not 100% native mode: will probe irqs later
[ 2.944000] ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio
[ 2.944000] ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio
[ 2.944000] Probing IDE interface ide0...
[ 3.232000] hda: IC25N040ATMR04-0, ATA DISK drive
[ 3.520000] usb 1-2: new low speed USB device using ohci_hcd and address 3
[ 3.728000] usb 1-2: configuration #1 chosen from 1 choice
[ 3.740000] usbcore: registered new interface driver hiddev
[ 3.748000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[ 3.748000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-2
[ 3.748000] usbcore: registered new interface driver usbhid
[ 3.748000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 3.904000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.924000] Probing IDE interface ide1...
[ 4.664000] hdc: TOSHIBA DVD-ROM SD-R2512, ATAPI CD/DVD-ROM drive
[ 5.384000] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.392000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 5.444000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[e8214000-e82147ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 5.444000] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 5.444000] eth0: RealTek RTL8139 at 0xdc91e800, 00:02:3f:d6:a6:db, IRQ 18
[ 5.444000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 5.448000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 5.456000] hda: max request size: 512KiB
[ 5.472000] hda: 78140160 sectors (40007 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(100)
[ 5.472000] hda: cache flushes supported
[ 5.472000] hda: hda1 hda2 < hda5 >
[ 5.572000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 5.572000] Uniform CD-ROM driver Revision: 3.20
[ 5.960000] Attempting manual resume
[ 5.960000] swsusp: Resume From Partition 3:5
[ 5.960000] PM: Checking swsusp image.
[ 5.992000] PM: Resume from disk failed.
[ 6.068000] kjournald starting. Commit interval 5 seconds
[ 6.068000] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.716000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f4756401834]
[ 22.072000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 23.512000] NET: Registered protocol family 17
[ 23.696000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 23.704000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 24.036000] ath_hal: module license 'Proprietary' taints kernel.
[ 24.040000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 24.072000] Linux agpgart interface v0.102 (c) Dave Jones
[ 24.092000] agpgart: Detected Ati IGP9100/M chipset
[ 24.096000] agpgart: AGP aperture is 32M @ 0xea000000
[ 24.352000] wlan: 0.8.4.2 (0.9.3)
[ 24.404000] ath_pci: 0.9.4.5 (0.9.3)
[ 24.404000] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 24.888000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 25.120000] input: PS/2 Mouse as /class/input/input3
[ 25.140000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input4
[ 25.140000] ath_rate_sample: 1.2 (0.9.3)
[ 25.140000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 25.140000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 25.144000] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 25.144000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 25.144000] wifi0: mac 5.9 phy 4.3 radio 4.6
[ 25.144000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 25.144000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 25.144000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 25.144000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 25.144000] wifi0: Use hw queue 8 for CAB traffic
[ 25.144000] wifi0: Use hw queue 9 for beacons
[ 25.252000] wifi0: Atheros 5212: mem=0xe8200000, irq=19
[ 25.252000] Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff01]
[ 25.252000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 25.252000] Yenta: Routing CardBus interrupts to PCI
[ 25.252000] Yenta TI: socket 0000:02:04.0, mfunc 0x89501212, devctl 0x44
[ 25.420000] input: PC Speaker as /class/input/input5
[ 25.484000] Yenta: ISA IRQ mask 0x0e70, PCI irq 16
[ 25.484000] Socket status: 30000006
[ 25.484000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 25.484000] cs: IO port probe 0xa000-0xafff: clean.
[ 25.484000] pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff
[ 25.484000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[ 25.508000] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 25.508000] atiixp: codec reset timeout
[ 25.560000] parport: PnPBIOS parport detected.
[ 25.560000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 25.592000] sdhci: Secure Digital Host Controller Interface driver
[ 25.592000] sdhci: Copyright(c) Pierre Ossman
[ 25.816000] irda_init()
[ 25.816000] NET: Registered protocol family 23
[ 26.024000] sdhci: SDHCI controller found at 0000:02:04.2 [1524:0550] (rev 0)
[ 26.024000] ACPI: PCI Interrupt 0000:02:04.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 26.024000] mmc0: SDHCI at 0xe8215000 irq 17 DMA
[ 26.036000] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[ 26.268000] cs: IO port probe 0x100-0x3af: clean.
[ 26.268000] cs: IO port probe 0x3e0-0x4ff: clean.
[ 26.268000] cs: IO port probe 0x820-0x8ff: clean.
[ 26.268000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7
[ 26.268000] cs: IO port probe 0xa00-0xaff: clean.
[ 26.440000] fuse init (API version 7.8)
[ 26.472000] lp0: using parport0 (interrupt-driven).
[ 26.532000] Adding 1317288k swap on /dev/disk/by-uuid/f05c29b5-fed7-4a3a-9b1c-3e21def8831c. Priority:-1 extents:1 across:1317288k
[ 26.700000] EXT3 FS on hda1, internal journal
[ 26.928000] NET: Registered protocol family 10
[ 26.928000] lo: Disabled Privacy Extensions

Thanks so much for your help.

Revision history for this message
Cesare Tirabassi (norsetto) said : 		#3

Also there nothing out of the "ordinary".
I noted that you say to have a 9000 video card, Xorg reports a 9100 though.
Can you show me what is reported by a lspci -v command?
Can you also show me what is in .xsession-errors?

Revision history for this message
Kiyo (kiyowmasui) said : 		#4

Here they are:

lspci -v:

[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d0000 size: 0000000000008000 end: 00000000000d8000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001be70000 end: 000000001bf70000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001bf70000 size: 000000000000b000 end: 000000001bf7b000 type: 3
[ 0.000000] copy_e820_map() start: 000000001bf7b000 size: 0000000000005000 end: 000000001bf80000 type: 4
[ 0.000000] copy_e820_map() start: 000000001bf80000 size: 0000000000080000 end: 000000001c000000 type: 2
[ 0.000000] copy_e820_map() start: 000000002bf80000 size: 0000000000080000 end: 000000002c000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bf70000 (usable)
[ 0.000000] BIOS-e820: 000000001bf70000 - 000000001bf7b000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001bf7b000 - 000000001bf80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved)
[ 0.000000] BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 447MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f6ae0
[ 0.000000] Entering add_active_range(0, 0, 114544) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114544
[ 0.000000] HighMem 114544 -> 114544
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114544
[ 0.000000] On node 0 totalpages: 114544
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 862 pages used for memmap
[ 0.000000] Normal zone: 109586 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6b40
[ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1bf75ece
[ 0.000000] ACPI: FADT (v001 TOSCPL Chinook 0x06040000 ATI 0x00000003) @ 0x1bf7af32
[ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1bf7afa6
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x1bf76316
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x1bf76101
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x1bf75f06
[ 0.000000] ACPI: DSDT (v001 TOSCPL SB200 0x06040000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 2c000000:d2c00000)
[ 0.000000] Detected 2800.227 MHz processor.
[ 6.854973] Built 1 zonelists. Total pages: 113650
[ 6.854978] Kernel command line: root=UUID=4c56324c-f7a2-41e0-b43b-91fa88db979b ro single
[ 6.855139] mapped APIC to ffffd000 (fee00000)
[ 6.855142] mapped IOAPIC to ffffc000 (fec00000)
[ 6.855146] Enabling fast FPU save and restore... done.
[ 6.855149] Enabling unmasked SIMD FPU exception support... done.
[ 6.855167] Initializing CPU#0
[ 6.855265] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 6.856296] Console: colour VGA+ 80x25
[ 6.858713] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 6.859123] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 6.871421] Memory: 442944k/458176k available (1992k kernel code, 14668k reserved, 893k data, 328k init, 0k highmem)
[ 6.871479] virtual kernel memory layout:
[ 6.871480] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 6.871481] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 6.871482] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 6.871483] lowmem : 0xc0000000 - 0xdbf70000 ( 447 MB)
[ 6.871484] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 6.871485] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 6.871486] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 6.871747] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 6.951090] Calibrating delay using timer specific routine.. 5603.53 BogoMIPS (lpj=11207070)
[ 6.951199] Security Framework v1.0.0 initialized
[ 6.951238] SELinux: Disabled at boot.
[ 6.951286] Mount-cache hash table entries: 512
[ 6.951475] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[ 6.951488] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 6.951545] CPU: L2 cache: 512K
[ 6.951578] CPU: Hyper-Threading is disabled
[ 6.951612] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080 00004400 00000000 00000000
[ 6.951623] Compat vDSO mapped to ffffe000.
[ 6.951659] Remapping vsyscall page to ffffe000
[ 6.951703] Checking 'hlt' instruction... OK.
[ 6.967192] SMP alternatives: switching to UP code
[ 6.967453] Freeing SMP alternatives: 11k freed
[ 6.967709] Early unpacking initramfs... done
[ 7.252865] ACPI: Core revision 20060707
[ 7.279137] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 7.284766] CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
[ 7.284913] Total of 1 processors activated (5603.53 BogoMIPS).
[ 7.285013] ENABLING IO-APIC IRQs
[ 7.285223] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 7.324891] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 7.324925] ...trying to set up timer (IRQ0) through the 8259A ... failed.
[ 7.324982] ...trying to set up timer as Virtual Wire IRQ... works.
[ 7.470170] Brought up 1 CPUs
[ 7.470472] Booting paravirtualized kernel on bare hardware
[ 7.470573] Time: 13:55:15 Date: 04/13/107
[ 7.470639] NET: Registered protocol family 16
[ 7.470785] EISA bus registered
[ 7.470822] ACPI: bus type pci registered
[ 7.506179] PCI: PCI BIOS revision 2.10 entry at 0xfd958, last bus=2
[ 7.506214] PCI: Using configuration type 1
[ 7.506247] Setting up standard PCI resources
[ 7.531817] ACPI: Interpreter enabled
[ 7.531857] ACPI: Using IOAPIC for interrupt routing
[ 7.532479] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 7.532519] PCI: Probing PCI hardware (bus 00)
[ 7.533633] Boot video device is 0000:01:05.0
[ 7.534118] PCI: Transparent bridge - 0000:00:14.4
[ 7.534230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 7.536690] ACPI: PCI Interrupt Link [LNK0] (IRQs 10 11) *0, disabled.
[ 7.537070] ACPI: PCI Interrupt Link [LNK1] (IRQs 10 11) *0, disabled.
[ 7.537441] ACPI: PCI Interrupt Link [LNK2] (IRQs 10 11) *0, disabled.
[ 7.537817] ACPI: PCI Interrupt Link [LNK3] (IRQs 10 11) *0, disabled.
[ 7.582009] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 7.582916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 7.583335] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 7.583385] pnp: PnP ACPI init
[ 7.605977] pnp: PnP ACPI: found 11 devices
[ 7.606016] PnPBIOS: Disabled by ACPI PNP
[ 7.606113] PCI: Using ACPI for IRQ routing
[ 7.606148] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 7.611648] NET: Registered protocol family 8
[ 7.611681] NET: Registered protocol family 20
[ 7.611918] pnp: 00:07: ioport range 0x1080-0x1080 has been reserved
[ 7.611955] pnp: 00:07: ioport range 0x220-0x22f has been reserved
[ 7.611989] pnp: 00:07: ioport range 0x40b-0x40b has been reserved
[ 7.612024] pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 7.612377] PCI: Bridge: 0000:00:01.0
[ 7.612411] IO window: 9000-9fff
[ 7.612445] MEM window: e8100000-e81fffff
[ 7.612480] PREFETCH window: f0000000-f7ffffff
[ 7.612521] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[ 7.612554] IO window: 0000a400-0000a4ff
[ 7.612589] IO window: 0000a800-0000a8ff
[ 7.612625] PREFETCH window: 30000000-33ffffff
[ 7.612660] MEM window: 34000000-37ffffff
[ 7.612696] PCI: Bridge: 0000:00:14.4
[ 7.612729] IO window: a000-afff
[ 7.612763] MEM window: e8200000-e82fffff
[ 7.612798] PREFETCH window: 30000000-33ffffff
[ 7.612864] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 7.612963] NET: Registered protocol family 2
[ 7.645893] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 7.646034] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 7.646194] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 7.646285] TCP: Hash tables configured (established 16384 bind 8192)
[ 7.646321] TCP reno registered
[ 7.657905] checking if image is initramfs... it is
[ 8.222496] Freeing initrd memory: 6993k freed
[ 8.223086] audit: initializing netlink socket (disabled)
[ 8.223140] audit(1179064515.412:1): initialized
[ 8.223331] VFS: Disk quotas dquot_6.5.1
[ 8.223384] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 8.223475] io scheduler noop registered
[ 8.223530] io scheduler anticipatory registered
[ 8.223585] io scheduler deadline registered
[ 8.223645] io scheduler cfq registered (default)
[ 8.752000] isapnp: Scanning for PnP cards...
[ 9.104472] isapnp: No Plug & Play device found
[ 9.132993] Real Time Clock Driver v1.12ac
[ 9.133091] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 9.133417] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 9.134061] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[ 9.134135] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 9.134246] mice: PS/2 mouse device common for all mice
[ 9.134908] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 9.135302] input: Macintosh mouse button emulation as /class/input/input0
[ 9.135376] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 9.135413] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 9.135659] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 9.136736] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 9.136824] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.136863] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 9.136898] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 9.136932] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 9.136966] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 9.137184] EISA: Probing bus 0 at eisa.0
[ 9.137224] Cannot allocate resource for EISA slot 1
[ 9.137990] Cannot allocate resource for EISA slot 8
[ 9.138024] EISA: Detected 0 cards.
[ 9.168111] TCP cubic registered
[ 9.168150] NET: Registered protocol family 1
[ 9.168209] Using IPI No-Shortcut mode
[ 9.168313] ACPI: (supports S0 S3 S4 S5)
[ 9.168495] Magic number: 7:239:938
[ 9.169288] Freeing unused kernel memory: 328k freed
[ 9.170917] input: AT Translated Set 2 keyboard as /class/input/input1
[ 9.170969] Time: tsc clocksource has been installed.
[ 9.359038] Capability LSM initialized
[ 9.402821] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 9.402952] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 9.403037] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 9.968465] usbcore: registered new interface driver usbfs
[ 9.968531] usbcore: registered new interface driver hub
[ 9.968586] usbcore: registered new device driver usb
[ 9.981162] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.981230] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 9.981316] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 9.981603] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 9.981664] ohci_hcd 0000:00:13.0: irq 18, io mem 0xe8001000
[ 10.007903] SCSI subsystem initialized
[ 10.013556] libata version 2.20 loaded.
[ 10.041741] usb usb1: configuration #1 chosen from 1 choice
[ 10.041809] hub 1-0:1.0: USB hub found
[ 10.041854] hub 1-0:1.0: 3 ports detected
[ 10.066950] ieee1394: Initialized config rom entry `ip1394'
[ 10.084975] 8139too Fast Ethernet driver 0.9.28
[ 10.145360] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18
[ 10.145451] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 10.145508] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 10.145566] ohci_hcd 0000:00:13.1: irq 18, io mem 0xe8002000
[ 10.205739] usb usb2: configuration #1 chosen from 1 choice
[ 10.205818] hub 2-0:1.0: USB hub found
[ 10.205865] hub 2-0:1.0: 3 ports detected
[ 10.309093] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18
[ 10.309180] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 10.309249] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 10.309334] ehci_hcd 0000:00:13.2: irq 18, io mem 0xe8003000
[ 10.309374] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 10.309506] usb usb3: configuration #1 chosen from 1 choice
[ 10.309566] hub 3-0:1.0: USB hub found
[ 10.309605] hub 3-0:1.0: 6 ports detected
[ 2.876000] Time: acpi_pm clocksource has been installed.
[ 2.944000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 2.944000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 2.944000] ATIIXP: chipset revision 0
[ 2.944000] ATIIXP: not 100% native mode: will probe irqs later
[ 2.944000] ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio
[ 2.944000] ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio
[ 2.944000] Probing IDE interface ide0...
[ 3.232000] hda: IC25N040ATMR04-0, ATA DISK drive
[ 3.520000] usb 1-2: new low speed USB device using ohci_hcd and address 3
[ 3.728000] usb 1-2: configuration #1 chosen from 1 choice
[ 3.740000] usbcore: registered new interface driver hiddev
[ 3.748000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[ 3.748000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-2
[ 3.748000] usbcore: registered new interface driver usbhid
[ 3.748000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 3.904000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.924000] Probing IDE interface ide1...
[ 4.664000] hdc: TOSHIBA DVD-ROM SD-R2512, ATAPI CD/DVD-ROM drive
[ 5.384000] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.392000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 5.444000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[e8214000-e82147ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 5.444000] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 5.444000] eth0: RealTek RTL8139 at 0xdc91e800, 00:02:3f:d6:a6:db, IRQ 18
[ 5.444000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 5.448000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 5.456000] hda: max request size: 512KiB
[ 5.472000] hda: 78140160 sectors (40007 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(100)
[ 5.472000] hda: cache flushes supported
[ 5.472000] hda: hda1 hda2 < hda5 >
[ 5.572000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 5.572000] Uniform CD-ROM driver Revision: 3.20
[ 5.960000] Attempting manual resume
[ 5.960000] swsusp: Resume From Partition 3:5
[ 5.960000] PM: Checking swsusp image.
[ 5.992000] PM: Resume from disk failed.
[ 6.068000] kjournald starting. Commit interval 5 seconds
[ 6.068000] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.716000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f4756401834]
[ 22.072000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 23.512000] NET: Registered protocol family 17
[ 23.696000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 23.704000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 24.036000] ath_hal: module license 'Proprietary' taints kernel.
[ 24.040000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 24.072000] Linux agpgart interface v0.102 (c) Dave Jones
[ 24.092000] agpgart: Detected Ati IGP9100/M chipset
[ 24.096000] agpgart: AGP aperture is 32M @ 0xea000000
[ 24.352000] wlan: 0.8.4.2 (0.9.3)
[ 24.404000] ath_pci: 0.9.4.5 (0.9.3)
[ 24.404000] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 24.888000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 25.120000] input: PS/2 Mouse as /class/input/input3
[ 25.140000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input4
[ 25.140000] ath_rate_sample: 1.2 (0.9.3)
[ 25.140000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 25.140000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 25.144000] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 25.144000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 25.144000] wifi0: mac 5.9 phy 4.3 radio 4.6
[ 25.144000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 25.144000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 25.144000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 25.144000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 25.144000] wifi0: Use hw queue 8 for CAB traffic
[ 25.144000] wifi0: Use hw queue 9 for beacons
[ 25.252000] wifi0: Atheros 5212: mem=0xe8200000, irq=19
[ 25.252000] Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff01]
[ 25.252000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 25.252000] Yenta: Routing CardBus interrupts to PCI
[ 25.252000] Yenta TI: socket 0000:02:04.0, mfunc 0x89501212, devctl 0x44
[ 25.420000] input: PC Speaker as /class/input/input5
[ 25.484000] Yenta: ISA IRQ mask 0x0e70, PCI irq 16
[ 25.484000] Socket status: 30000006
[ 25.484000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 25.484000] cs: IO port probe 0xa000-0xafff: clean.
[ 25.484000] pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff
[ 25.484000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[ 25.508000] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 25.508000] atiixp: codec reset timeout
[ 25.560000] parport: PnPBIOS parport detected.
[ 25.560000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 25.592000] sdhci: Secure Digital Host Controller Interface driver
[ 25.592000] sdhci: Copyright(c) Pierre Ossman
[ 25.816000] irda_init()
[ 25.816000] NET: Registered protocol family 23
[ 26.024000] sdhci: SDHCI controller found at 0000:02:04.2 [1524:0550] (rev 0)
[ 26.024000] ACPI: PCI Interrupt 0000:02:04.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 26.024000] mmc0: SDHCI at 0xe8215000 irq 17 DMA
[ 26.036000] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[ 26.268000] cs: IO port probe 0x100-0x3af: clean.
[ 26.268000] cs: IO port probe 0x3e0-0x4ff: clean.
[ 26.268000] cs: IO port probe 0x820-0x8ff: clean.
[ 26.268000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7
[ 26.268000] cs: IO port probe 0xa00-0xaff: clean.
[ 26.440000] fuse init (API version 7.8)
[ 26.472000] lp0: using parport0 (interrupt-driven).
[ 26.532000] Adding 1317288k swap on /dev/disk/by-uuid/f05c29b5-fed7-4a3a-9b1c-3e21def8831c. Priority:-1 extents:1 across:1317288k
[ 26.700000] EXT3 FS on hda1, internal journal
[ 26.928000] NET: Registered protocol family 10
[ 26.928000] lo: Disabled Privacy Extensions

and the other one

.xsession-errors:

Xsession: X session started for root at Sun May 13 00:02:11 ADT 2007
SESSION_MANAGER=local/Schrodinger:/tmp/.ICE-unix/4488
Initializing gnome-mount extension

** (nautilus:4568): WARNING **: Cannot connect to system bus: org.freedesktop.DBus.Error.FileNotFound : Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory

** (nautilus:4568): WARNING **: Could not initialize hal context

(nautilus:4568): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed

(nautilus:4568): GLib-GObject-CRITICAL **: g_object_weak_ref: assertion `G_IS_OBJECT (object)' failed
Shutting down gnome-mount extension

** (update-notifier:4579): WARNING **: not starting because user is not in admin group

** (gnome-cups-icon:4590): WARNING **: IPP request failed with status 1280

** (gnome-cups-icon:4590): WARNING **: IPP request failed with status 1280

(nautilus:4568): Liboobs-WARNING **: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory

** (nm-applet:4589): WARNING **: <WARNING> nma_dbus_init (): org.freedesktop.DBus.Error.FileNotFound raised:
 Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory

(gnome-panel:4564): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -3 and height 24
evolution-alarm-notify-Message: Setting timeout for 75451 1179100800 1179025349
evolution-alarm-notify-Message: Sun May 13 21:00:00 2007

evolution-alarm-notify-Message: Sun May 13 00:02:29 2007

** (nm-applet:4589): WARNING **: <WARNING> nma_dbus_init (): org.freedesktop.DBus.Error.FileNotFound raised:
 Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory

** (nm-applet:4589): WARNING **: <WARNING> nma_dbus_init (): org.freedesktop.DBus.Error.FileNotFound raised:
 Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory

** (nm-applet:4589): WARNING **: <WARNING> nma_dbus_init (): org.freedesktop.DBus.Error.FileNotFound raised:
 Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory

That last error was in there about 2 million more times after that over and over.

Again thanks so much for your help. I'd drought it's possible to get help like this for windows!!

Revision history for this message
Cesare Tirabassi (norsetto) said : 		#5

Could you perhaps repost the output of lspci -v? I'm afraid the first time didn't go through.
Can you also tell me what is reported on the screen if you run this command:

sudo /etc/init.d/dbus restart

And please also tell me if there is anything in /var/run/dbus/ before and after the previous command (If there is a pid file please tell me the number it contains) and finally the result of the command:

ps -A | grep dbus-daemon

Thanks.

Revision history for this message
Kiyo (kiyowmasui) said : 		#6

Your right about the lspci -v . . . . Here it is:

root@Schrodinger:~# lspci -v
00:00.0 Host bridge: ATI Technologies Inc RS300 Host Bridge (rev 02)
        Subsystem: Toshiba America Info Systems Unknown device ff00
        Flags: bus master, 66MHz, medium devsel, latency 64
        Memory at ea000000 (32-bit, prefetchable) [size=32M]
        Memory at e8000000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [a0] AGP version 3.0

00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP AGP Bridge (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, medium devsel, latency 99
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: e8100000-e81fffff
        Prefetchable memory behind bridge: f0000000-f7ffffff

00:13.0 USB Controller: ATI Technologies Inc OHCI USB Controller #1 (rev 01) (prog-if 10 [OHCI])
        Subsystem: Toshiba America Info Systems Unknown device ff00
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
        Memory at e8001000 (32-bit, non-prefetchable) [size=4K]

00:13.1 USB Controller: ATI Technologies Inc OHCI USB Controller #2 (rev 01) (prog-if 10 [OHCI])
        Subsystem: Toshiba America Info Systems Unknown device ff00
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
        Memory at e8002000 (32-bit, non-prefetchable) [size=4K]

00:13.2 USB Controller: ATI Technologies Inc EHCI USB Controller (rev 01) (prog-if 20 [EHCI])
        Subsystem: Toshiba America Info Systems Unknown device ff00
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
        Memory at e8003000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [dc] Power Management version 2

00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 18)
        Subsystem: Toshiba America Info Systems Unknown device ff00
        Flags: 66MHz, medium devsel
        I/O ports at 8060 [size=16]
        Memory at e8004000 (32-bit, non-prefetchable) [size=1K]

00:14.1 IDE interface: ATI Technologies Inc ATI Dual Channel Bus Master PCI IDE Controller (prog-if 8a [Master SecP PriP])
        Subsystem: Toshiba America Info Systems Unknown device ff00
        Flags: bus master, medium devsel, latency 64, IRQ 16
        I/O ports at 01f0 [size=8]
        I/O ports at 03f4 [size=1]
        I/O ports at 0170 [size=8]
        I/O ports at 0374 [size=1]
        I/O ports at 8070 [size=16]

00:14.3 ISA bridge: ATI Technologies Inc Unknown device 434c
        Subsystem: Toshiba America Info Systems Unknown device ff00
        Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge: ATI Technologies Inc Unknown device 4342 (prog-if 01 [Subtractive decode])
        Flags: bus master, 66MHz, medium devsel, latency 64
        Bus: primary=00, secondary=02, subordinate=04, sec-latency=168
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: e8200000-e82fffff
        Prefetchable memory behind bridge: 30000000-33ffffff

00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97 Audio Controller
        Subsystem: Toshiba America Info Systems Unknown device ff01
        Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 17
        Memory at e8004400 (32-bit, non-prefetchable) [size=256]

00:14.6 Modem: ATI Technologies Inc IXP AC'97 Modem (rev 01) (prog-if 00 [Generic])
        Subsystem: Toshiba America Info Systems Unknown device 0001
        Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 17
        Memory at e8004800 (32-bit, non-prefetchable) [size=256]

01:05.0 VGA compatible controller: ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP] (prog-if 00 [VGA])
        Subsystem: Toshiba America Info Systems Unknown device ff02
        Flags: bus master, fast Back2Back, 66MHz, medium devsel, latency 66, IRQ 16
        Memory at f0000000 (32-bit, prefetchable) [size=128M]
        I/O ports at 9000 [size=256]
        Memory at e8100000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at e8120000 [disabled] [size=128K]
        Capabilities: [58] AGP version 3.0
        Capabilities: [50] Power Management version 2

02:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
        Subsystem: Toshiba America Info Systems Unknown device ff00
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at e8214000 (32-bit, non-prefetchable) [size=2K]
        Memory at e8210000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2

02:02.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
        Subsystem: Askey Computer Corp. Unknown device 7064
        Flags: bus master, medium devsel, latency 168, IRQ 19
        Memory at e8200000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: [44] Power Management version 2

02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Toshiba America Info Systems Unknown device ff00
        Flags: bus master, medium devsel, latency 128, IRQ 18
        I/O ports at a000 [size=256]
        Memory at e8214800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2

02:04.0 CardBus bridge: ENE Technology Inc CB-710/2/4 Cardbus Controller
        Subsystem: Toshiba America Info Systems Unknown device ff01
        Flags: bus master, medium devsel, latency 168, IRQ 16
        Memory at e8216000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
        Memory window 0: 30000000-33fff000 (prefetchable)
        Memory window 1: 34000000-37fff000
        I/O window 0: 0000a400-0000a4ff
        I/O window 1: 0000a800-0000a8ff
        16-bit legacy interface ports at 0001

02:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller
        Subsystem: Toshiba America Info Systems Unknown device ff00
        Flags: bus master, medium devsel, latency 64, IRQ 11
        Memory at e8214c00 (32-bit, non-prefetchable) [size=128]
        Capabilities: [80] Power Management version 2

02:04.2 Generic system peripheral [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (prog-if 01)
        Subsystem: Toshiba America Info Systems Unknown device ff01
        Flags: bus master, medium devsel, latency 64, IRQ 17
        Memory at e8215000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2

02:04.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc:
        Subsystem: Toshiba America Info Systems Unknown device ff00
        Flags: bus master, medium devsel, latency 64, IRQ 11
        Memory at e8215400 (32-bit, non-prefetchable) [size=128]
        Capabilities: [80] Power Management version 2

The directory /var/run/dbus/ does not exist before the command

root@Schrodinger:~# sudo /etc/init.d/dbus restart
 * Stopping System Tools Backends system-tools-backends [ OK ]
 * Stopping network events dispatcher NetworkManagerDispatcher [ OK ]
 * Stopping Avahi mDNS/DNS-SD Daemon: avahi-daemon [fail]
 * Stopping network connection manager NetworkManager [ OK ]
 * Stopping DHCP D-Bus daemon dhcdbd [ OK ]
 * Stopping Hardware abstraction layer hald [ OK ]
 * Stopping system message bus dbus [ OK ]
 * Starting system message bus dbus [ OK ]
 * Starting Hardware abstraction layer hald [ OK ]
 * Starting DHCP D-Bus daemon dhcdbd [ OK ]
 * Starting network connection manager NetworkManager [ OK ]
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ OK ]
 * Starting network events dispatcher NetworkManagerDispatcher [ OK ]
 * Starting System Tools Backends system-tools-backends [ OK ]

after this:

root@Schrodinger:/var/run/dbus# ls -a
. .. pid system_bus_socket

contents of pid:

13959

root@Schrodinger:~# ps -A | grep dbus-daemon
 4486 ? 00:00:00 dbus-daemon
13959 ? 00:00:00 dbus-daemon
14108 ? 00:00:00 dbus-daemon

I hope this helps

Revision history for this message
Cesare Tirabassi (norsetto) said : 		#7

I see two problems:

1) The video hardware is reporting that it is a 9100, you said it is a 9000, therefore one of you is wrong.
2) The Avahi daemon is not started at boot, and I don't know why.

First, I want to see if by solving 2) we can also have the x-server up and running. Reboot and try again with a command:

sudo /etc/init.d/dbus restart

if all the starting messages ends in [OK] check with ps -A | grep dbus-daemon that you have 3 processes running and that the pid of one of those correspond to the content of the file /var/run/dbus/pid. If that is so give this command:

sudo /etc/init.d/gdm restart

and tell me what is the outcome.

Revision history for this message
Kiyo (kiyowmasui) said : 		#8

After sudo /etc/init.d/dbus restart:

the first time one of the messages reads [fail] but if you do it again they all read [ok].

in either case (last command once or twice) there are only 2 processes running after the ps -A command but one does in fact have the same pid as /var/run/dbus/pid

sudo /etc/init.d/gdm restart, This brings me to the login screen and which yields a fully functional desktop!!!!!

If I give the the gdm restart command without giving the dbus restart command I again get a fully functional desktop but I get: "internal error, failed to initialize HAL!"

Lastly, I'm 95% sure I have a 9000 (I checked on the Toshiba website) but alas i can't be positive as I lost the ati sticker long ago and I'm not brave enough to open her up.

we seem to be getting somewhere

Revision history for this message
Cesare Tirabassi (norsetto) said : 		#9

Lets see first what is the problem at boot that blocks the Avahi daemon.

Can you tell me what is the content of these files:

/etc/avahi/avahi-daemon.conf
/etc/avahi/hosts

And what files (if any) are reported by this command:

ls -l /etc/avahi/services/*.service

Last, check in your syslog the error messages associated to avahi and dbus and paste them here.

Revision history for this message
Kiyo (kiyowmasui) said : 		#10

This is the avahi-daemon.conf

# $Id: avahi-daemon.conf 1366 2007-01-05 22:19:28Z lennart $
#
# This file is part of avahi.
#
# avahi is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as
# published by the Free Software Foundation; either version 2 of the
# License, or (at your option) any later version.
#
# avahi is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
# License for more details.
#
# You should have received a copy of the GNU Lesser General Public
# License along with avahi; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.

# See avahi-daemon.conf(5) for more information on this configuration
# file!

[server]
#host-name=foo
#domain-name=local
#browse-domains=0pointer.de, zeroconf.org
use-ipv4=yes
use-ipv6=no
#check-response-ttl=no
#use-iff-running=no
#enable-dbus=yes
#disallow-other-stacks=no
#allow-point-to-point=no

[wide-area]
enable-wide-area=yes

[publish]
#disable-publishing=no
#disable-user-service-publishing=no
#add-service-cookie=yes
#publish-addresses=yes
#publish-hinfo=yes
#publish-workstation=yes
#publish-domain=yes
#publish-dns-servers=192.168.50.1, 192.168.50.2
#publish-resolv-conf-dns-servers=yes
#publish-aaaa-on-ipv4=yes
#publish-a-on-ipv6=no

[reflector]
#enable-reflector=no
#reflect-ipv=no

[rlimits]
#rlimit-as=
rlimit-core=0
rlimit-data=4194304
rlimit-fsize=0
rlimit-nofile=30
rlimit-stack=4194304
rlimit-nproc=3

and the hosts file

# $Id: hosts 1137 2006-02-14 21:31:48Z lennart $
#
# This file is part of avahi.
#
# avahi is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as
# published by the Free Software Foundation; either version 2 of the
# License, or (at your option) any later version.
#
# avahi is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
# License for more details.
#
# You should have received a copy of the GNU Lesser General Public
# License along with avahi; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.

# This file contains static ip address <-> host name mappings. These
# can be useful to publish services on behalf of a non-avahi enabled
# device. Please bear in mind that host names are expected to be
# fully qualified domain names, i.e. ending in .local!

# See avahi.hosts(5) for more information on this configuration file!

# Examples:
# 192.168.0.1 router.local
# 2001::81:1 test.local

the ls -l command gives nothing

in the log I'm posting almost anything that mentions dbus or avahi but I think only the fist and second ones posted here are actually error messages. There are also the two "failed fopen" messages for avahi
in /var/log/syslog:

May 12 23:02:06 Schrodinger dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason

May 12 23:04:19 Schrodinger NetworkManager: <WARNING>^I nm_dbus_get_networks_cb (): error received: org.freedesktop.DBus.Error.NoReply - Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken..

May 12 23:31:42 Schrodinger avahi-daemon[4777]: Withdrawing address record for 192.168.1.103 on eth0.
May 12 23:31:42 Schrodinger avahi-daemon[4777]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.103.
May 12 23:31:42 Schrodinger avahi-daemon[4777]: Interface eth0.IPv4 no longer relevant for mDNS.
May 12 23:31:42 Schrodinger avahi-daemon[4777]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.103.
May 12 23:31:42 Schrodinger avahi-daemon[4777]: New relevant interface eth0.IPv4 for mDNS.
May 12 23:31:42 Schrodinger avahi-daemon[4777]: Registering new address record for 192.168.1.103 on eth0.IPv4.

May 12 23:31:44 Schrodinger avahi-daemon[4777]: Registering new address record for fe80::202:3fff:fed6:a6db on eth0.*.

May 12 23:32:02 Schrodinger avahi-autoipd(ath0)[5380]: Found user 'avahi-autoipd' (UID 104) and group 'avahi-autoipd' (GID 110).
May 12 23:32:03 Schrodinger avahi-autoipd(ath0)[5380]: Successfully called chroot().
May 12 23:32:03 Schrodinger avahi-autoipd(ath0)[5380]: Successfully dropped root privileges.
May 12 23:32:03 Schrodinger avahi-autoipd(ath0)[5380]: fopen() failed: Permission denied
May 12 23:32:03 Schrodinger avahi-autoipd(ath0)[5380]: Starting with address 169.254.10.150
May 12 23:32:04 Schrodinger gconfd (kiyo-5331): Resolved address "xml:readwrite:/home/kiyo/.gconf" to a writable configuration source at position 0
May 12 23:32:05 Schrodinger NetworkManager: <information>^IUpdating allowed wireless network lists.
May 12 23:32:08 Schrodinger avahi-autoipd(ath0)[5380]: Callout BIND, address 169.254.10.150 on interface ath0
May 12 23:32:08 Schrodinger avahi-daemon[4777]: Joining mDNS multicast group on interface ath0.IPv4 with address 169.254.10.150.
May 12 23:32:08 Schrodinger avahi-daemon[4777]: New relevant interface ath0.IPv4 for mDNS.
May 12 23:32:08 Schrodinger avahi-daemon[4777]: Registering new address record for 169.254.10.150 on ath0.IPv4.
May 12 23:32:12 Schrodinger avahi-autoipd(ath0)[5380]: Successfully claimed IP address 169.254.10.150
May 12 23:32:12 Schrodinger avahi-autoipd(ath0)[5380]: fopen() failed: Permission denied

Revision history for this message
Cesare Tirabassi (norsetto) said : 		#11

Thanks, I would also like to have a look at your /etc/hosts and /etc/network/interfaces files.
Just as a temporary workaround solution, I would also like you to remove the Network Manager. Do it with these commands:

sudo apt-get remove network-manager network-manager-gnome

Revision history for this message
Kiyo (kiyowmasui) said : 		#12

/etc/hosts:

127.0.0.1 localhost
127.0.1.1 Schrodinger

# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

/etc/nework/interfaces

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet dhcp

auto eth1
iface eth1 inet dhcp

auto eth2
iface eth2 inet dhcp

auto ath0
iface ath0 inet dhcp

auto wlan0
iface wlan0 inet dhcp

I removed network manager but to no avail, it still won't boot normally.

Revision history for this message
Cesare Tirabassi (norsetto) said : 		#13

We can try to remove the ip6 lines from in /etc/hosts, its just a shot in the dark though.
I'm afraid we have stumbled against a bug in dbus, most probably just a timing one because if we stop and restart the daemon then everything works as it should.
Since you have just installed, I can only suggest to reinstall 7.04 from scratch. It will be worth also to check the CD for defects before (also the image you burned just to make sure).
If by reinstalling it doesn't work again, you should report this as a bug.

Revision history for this message
Kiyo (kiyowmasui) said : 		#14

so remove all the lines:

fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

????

I've already tried to reinstall it before I came here and the CD.

I've heard of people writing custom boot sequences, is it possible to do this so that it restarts dbus automatically?

Thankyou so much for your help

Revision history for this message
Best Cesare Tirabassi (norsetto) said : 		#15

_removing ip6_

Yes, and also this one:

::1 ip6-localhost ip6-loopback

_enabling/disabling avahi daemon_

Can you also tell me what is in:

/etc/default/avahi-daemon

Try to change it, from 0 to 1 or from 1 to 0 and see if it is still not working.

_custom scripts at bootup_

To add your own script at bootup you have to:

1) install the script in the /etc/init.d/ directory. Lets call this script pippo (make sure there is not a script there already with the same name).
2) make the script executable with chmod +x pippo
3) insert the script in the boot sequence using the command update-rc.d pippo defaults

Revision history for this message
Kiyo (kiyowmasui) said : 		#16

Thanks Cesare Tirabassi, that solved my question.

Revision history for this message
Kiyo (kiyowmasui) said : 		#17

The Ip6 lines did it!!!!

Thank you so much for your help.

there is no way you could get support like this for Windows

Thanks again
Kiyo