Upgraded to 17.04 and having issues

I have a Dell XPS 13 9360 and have ran many distros using 16.04 without issue. I am having weird fluctuation in battery time remaining. In addition, the laptop is not suspending properly. I can click suspend on the top bar and it will black the screen out and then just wake up on its own within a second. Moreover, I am having errors below, as well. A lot of them when I google, I don't see solutions to. I have put a *** infront of the issues.

I am currently on Linux budgie 4.10.0-19-generic #21-Ubuntu SMP Thu Apr 6 17:04:57 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux.

***[ 3.255188] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 3.255748] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 3.272905] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.273049] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 3.285182] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 3.318031] AVX2 version of gcm_enc/dec engaged.
[ 3.318032] AES CTR mode by8 optimization enabled
[ 3.345036] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002)
[ 3.347277] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 3.379787] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 3.415251] intel_rapl: Found RAPL domain package
[ 3.415252] intel_rapl: Found RAPL domain core
[ 3.415253] intel_rapl: Found RAPL domain uncore
[ 3.415253] intel_rapl: Found RAPL domain dram
[ 3.486037] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 3.499955] dell_wmi: Detected Dell WMI interface version 1
[ 3.500017] input: Dell WMI hotkeys as /devices/virtual/input/input10
***[ 3.627908] ath10k_pci 0000:3a:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:3a:00.0.bin failed with error -2
***[ 3.627914] ath10k_pci 0000:3a:00.0: Direct firmware load for ath10k/cal-pci-0000:3a:00.0.bin failed with error -2
***[ 3.628656] ath10k_pci 0000:3a:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
***[ 3.628657] ath10k_pci 0000:3a:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
[ 3.629843] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
[ 3.629845] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[ 3.630314] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5
[ 3.693346] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 19644295
[ 3.788365] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input12
[ 3.788462] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01
[ 3.818112] [drm] RC6 on
[ 4.381687] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.390079] usbcore: registered new interface driver btusb
[ 4.394212] media: Linux media interface: v0.10
[ 4.398180] Linux video capture interface: v2.00
[ 4.403563] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
***[ 4.442582] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
***[ 4.442585] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
***[ 4.442586] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
***[ 4.442588] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 4.442654] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input17
[ 4.442843] usbcore: registered new interface driver uvcvideo
[ 4.442844] USB Video Class driver (1.1.1)
[ 4.462258] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.462260] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.462261] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 4.462261] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.462262] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.462263] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 4.462264] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 4.462264] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 4.478673] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 4.478727] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 4.478773] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 4.479440] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 4.542894] audit: type=1400 audit(1492936569.747:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=754 comm="apparmor_parser"
[ 4.542898] audit: type=1400 audit(1492936569.747:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=754 comm="apparmor_parser"
[ 4.543420] audit: type=1400 audit(1492936569.747:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=752 comm="apparmor_parser"
[ 4.543422] audit: type=1400 audit(1492936569.747:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=752 comm="apparmor_parser"
[ 4.543423] audit: type=1400 audit(1492936569.747:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=752 comm="apparmor_parser"
[ 4.543425] audit: type=1400 audit(1492936569.747:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=752 comm="apparmor_parser"
[ 4.543610] audit: type=1400 audit(1492936569.747:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=751 comm="apparmor_parser"
[ 4.543613] audit: type=1400 audit(1492936569.747:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=751 comm="apparmor_parser"
[ 4.544862] audit: type=1400 audit(1492936569.747:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=755 comm="apparmor_parser"
[ 4.610172] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.610173] Bluetooth: BNEP filters: protocol multicast
[ 4.610176] Bluetooth: BNEP socket layer initialized
***[ 5.156754] vboxdrv: loading out-of-tree module taints kernel.
[ 5.156926] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 5.162429] vboxdrv: Found 4 processor cores
[ 5.181795] vboxdrv: TSC mode is Invariant, tentative frequency 2712000374 Hz
[ 5.181796] vboxdrv: Successfully loaded version 5.1.18_Ubuntu (interface 0x00280000)
[ 5.185940] VBoxNetFlt: Successfully started.
[ 5.191044] VBoxNetAdp: Successfully started.
[ 5.195510] VBoxPciLinuxInit
[ 5.200683] vboxpci: IOMMU not found (not registered)
[ 5.831156] ath10k_pci 0000:3a:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 5.914445] ath: EEPROM regdomain: 0x69
[ 5.914447] ath: EEPROM indicates we should expect a direct regpair map
[ 5.914448] ath: Country alpha2 being used: 00
[ 5.914448] ath: Regpair used: 0x69
[ 5.920166] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0
[ 5.942100] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 8.222082] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 10.587211] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 10.650392] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 12.080757] Bluetooth: RFCOMM TTY layer initialized
[ 12.080764] Bluetooth: RFCOMM socket layer initialized
[ 12.080769] Bluetooth: RFCOMM ver 1.11
[ 15.122098] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 15.179375] wlp58s0: authenticate with f4:f2:6d:d8:fe:a7
[ 15.226795] wlp58s0: send auth to f4:f2:6d:d8:fe:a7 (try 1/3)
[ 15.231533] wlp58s0: authenticated
[ 15.233617] wlp58s0: associate with f4:f2:6d:d8:fe:a7 (try 1/3)
[ 15.245362] wlp58s0: RX AssocResp from f4:f2:6d:d8:fe:a7 (capab=0x11 status=0 aid=8)
[ 15.248255] wlp58s0: associated
[ 15.248301] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready
[ 15.251271] ath: EEPROM regdomain: 0x8348
[ 15.251272] ath: EEPROM indicates we should expect a country code
[ 15.251273] ath: doing EEPROM country->regdmn map search
[ 15.251274] ath: country maps to regdmn code: 0x3a
[ 15.251274] ath: Country alpha2 being used: US
[ 15.251275] ath: Regpair used: 0x3a
[ 15.251276] ath: regdomain 0x8348 dynamically updated by country IE
[ 18.066406] ACPI Error: [SPRT] Namespace lookup failure, AE_ALREADY_EXISTS (20160930/dswload2-330)
[ 18.066413] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20160930/psobject-227)
***[ 18.066416] ACPI Error: Method parse/execution failed [\_GPE._E42] (Node ffff9280b58e8848), AE_ALREADY_EXISTS (20160930/psparse-543)
[ 18.066421] ACPI Error: Method parse/execution failed [\_GPE._E42] (Node ffff9280b58e8848), AE_ALREADY_EXISTS (20160930/psparse-543)
[ 18.066428] ACPI Exception: AE_ALREADY_EXISTS, while evaluating GPE method [_E42] (20160930/evgpe-646)
***[ 18.110568] ACPI : button: The lid device is not compliant to SW_LID.
[ 18.133960] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400
[ 18.134079] pci 0000:01:00.0: supports D1 D2
[ 18.134080] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 18.134179] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 18.134502] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400
[ 18.134653] pci 0000:02:00.0: supports D1 D2
[ 18.134655] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 18.134822] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400
[ 18.135181] pci 0000:02:01.0: supports D1 D2
[ 18.135182] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 18.135325] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400
[ 18.137142] pci 0000:02:02.0: supports D1 D2
[ 18.137144] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 18.137312] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[ 18.137323] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 18.137329] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 18.137697] pci 0000:03:00.0: [8086:1575] type 00 class 0x088000
[ 18.137721] pci 0000:03:00.0: reg 0x10: [mem 0xda000000-0xda03ffff]
[ 18.137733] pci 0000:03:00.0: reg 0x14: [mem 0xda040000-0xda040fff]
[ 18.138111] pci 0000:03:00.0: supports D1 D2
[ 18.138112] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 18.138267] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 18.138277] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 18.138346] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[ 18.138355] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[ 18.138362] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 18.138451] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330
[ 18.138474] pci 0000:39:00.0: reg 0x10: [mem 0xd9f00000-0xd9f0ffff]
[ 18.138651] pci 0000:39:00.0: supports D1 D2
[ 18.138652] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 18.138792] pci 0000:02:02.0: PCI bridge to [bus 39]
[ 18.138802] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[ 18.138833] pci_bus 0000:02: Allocating resources
[ 18.138869] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
[ 18.138878] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
[ 18.138880] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[ 18.138891] pci 0000:02:01.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 18.138892] pci 0000:02:02.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 18.138894] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
[ 18.138896] pci 0000:01:00.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 2000 min_align 1000
[ 18.138897] pci 0000:01:00.0: res[13]=[io 0x1000-0x2fff] res_to_dev_res add_size 2000 min_align 1000
[ 18.138900] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000]
[ 18.138901] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
[ 18.138903] pci 0000:01:00.0: BAR 13: no space for [io size 0x2000]
[ 18.138904] pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
[ 18.138906] pci 0000:02:02.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 18.138907] pci 0000:02:02.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 18.138909] pci 0000:02:01.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 18.138910] pci 0000:02:01.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 18.138911] pci 0000:02:02.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 18.138913] pci 0000:02:02.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 18.138916] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 18.138916] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 18.138918] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[ 18.138919] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[ 18.138920] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[ 18.138921] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[ 18.138923] pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 18.138924] pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 18.138925] pci 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[ 18.138927] pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[ 18.138927] pci 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[ 18.138928] pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[ 18.138930] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 18.138936] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
[ 18.138945] pci 0000:02:01.0: PCI bridge to [bus 04-38]
[ 18.138950] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
[ 18.138954] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 18.138960] pci 0000:02:02.0: PCI bridge to [bus 39]
[ 18.138966] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
[ 18.138974] pci 0000:01:00.0: PCI bridge to [bus 02-39]
[ 18.138979] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 18.138983] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 18.144413] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 18.144420] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[ 18.145961] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x00009810
[ 18.146101] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 18.146103] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 18.146104] usb usb3: Product: xHCI Host Controller
[ 18.146105] usb usb3: Manufacturer: Linux 4.10.0-19-generic xhci-hcd
[ 18.146106] usb usb3: SerialNumber: 0000:39:00.0
[ 18.147111] hub 3-0:1.0: USB hub found
[ 18.147123] hub 3-0:1.0: 2 ports detected
[ 18.148547] xhci_hcd 0000:39:00.0: xHCI Host Controller
[ 18.148551] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[ 18.148588] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 18.148589] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 18.148591] usb usb4: Product: xHCI Host Controller
[ 18.148592] usb usb4: Manufacturer: Linux 4.10.0-19-generic xhci-hcd
[ 18.148593] usb usb4: SerialNumber: 0000:39:00.0
[ 18.148741] hub 4-0:1.0: USB hub found
[ 18.148750] hub 4-0:1.0: 2 ports detected
[ 19.604159] pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0
[ 19.604167] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID)
[ 19.604172] pcieport 0000:00:1c.0: device [8086:9d10] error status/mask=00000001/00002000
[ 19.604176] pcieport 0000:00:1c.0: [ 0] Receiver Error (First)
[ 23.126234] xhci_hcd 0000:39:00.0: remove, state 4
[ 23.126251] usb usb4: USB disconnect, device number 1
[ 23.126767] xhci_hcd 0000:39:00.0: Host halt failed, -19
[ 23.126775] xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
[ 23.126778] xhci_hcd 0000:39:00.0: USB bus 4 deregistered
[ 23.126800] xhci_hcd 0000:39:00.0: remove, state 4
[ 23.126809] usb usb3: USB disconnect, device number 1
[ 23.127379] xhci_hcd 0000:39:00.0: USB bus 3 deregistered
[ 23.133895] pci_bus 0000:03: busn_res: [bus 03] is released
[ 23.157782] pci_bus 0000:04: busn_res: [bus 04-38] is released
[ 23.221895] pci_bus 0000:39: busn_res: [bus 39] is released
[ 23.237773] pci_bus 0000:02: busn_res: [bus 02-39] is released
[ 25.562355] systemd[1]: motd-news.timer: Adding 9min 10.022880s random time.
[ 25.563504] systemd[1]: snapd.refresh.timer: Adding 5h 41min 47.604858s random time.
[ 25.563508] systemd[1]: snapd.refresh.timer: Adding 3h 50min 41.372246s random time.
[ 35.677456] systemd[1]: motd-news.timer: Adding 59min 45.733034s random time.
[ 35.678612] systemd[1]: snapd.refresh.timer: Adding 2h 18min 38.484752s random time.
[ 35.678617] systemd[1]: snapd.refresh.timer: Adding 2h 33min 13.889990s random time.
[ 148.502344] ------------[ cut here ]------------
[ 148.502365] WARNING: CPU: 2 PID: 2861 at /build/linux-Fk60NP/linux-4.10.0/net/core/dev.c:5300 net_rx_action+0x274/0x380
[ 148.502368] Modules linked in: ccm msr rfcomm arc4 pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) cmac uhid bnep snd_hda_codec_hdmi dell_led snd_hda_codec_realtek snd_hda_codec_generic uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev media btusb btrtl hid_multitouch nls_iso8859_1 joydev i2c_designware_platform dell_wmi i2c_designware_core dell_laptop dell_smbios dcdbas intel_rapl x86_pkg_temp_thermal intel_powerclamp snd_soc_skl coretemp snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_hda_ext_core snd_soc_sst_match kvm_intel snd_soc_core snd_compress ac97_bus kvm snd_pcm_dmaengine snd_hda_intel snd_hda_codec irqbypass snd_hda_core snd_hwdep crct10dif_pclmul snd_pcm crc32_pclmul ghash_clmulni_intel snd_seq_midi pcbc snd_seq_midi_event snd_rawmidi
[ 148.502513] ath10k_pci ath10k_core ath snd_seq mac80211 snd_seq_device aesni_intel aes_x86_64 crypto_simd snd_timer glue_helper cryptd rtsx_pci_ms cfg80211 snd memstick input_leds serio_raw soundcore mei_me mei shpchp idma64 virt_dma intel_pch_thermal processor_thermal_device intel_soc_dts_iosf intel_lpss_pci hci_uart btbcm soc_button_array btqca intel_vbtn btintel bluetooth intel_lpss_acpi intel_lpss tpm_crb int3403_thermal int340x_thermal_zone mac_hid intel_hid sparse_keymap int3400_thermal acpi_thermal_rel acpi_pad acpi_als kfifo_buf industrialio usb_storage parport_pc ppdev lp parport ip_tables x_tables autofs4 rtsx_pci_sdmmc i915 i2c_algo_bit psmouse drm_kms_helper syscopyarea sysfillrect nvme sysimgblt nvme_core fb_sys_fops rtsx_pci drm wmi i2c_hid hid pinctrl_sunrisepoint video pinctrl_intel
[ 148.502668] fjes
[ 148.502682] CPU: 2 PID: 2861 Comm: Media Tainted: G OE 4.10.0-19-generic #21-Ubuntu
[ 148.502686] Hardware name: Dell Inc. XPS 13 9360/05JK94, BIOS 1.3.2 01/18/2017
[ 148.502688] Call Trace:
[ 148.502695] <IRQ>
[ 148.502709] dump_stack+0x63/0x81
[ 148.502717] __warn+0xcb/0xf0
[ 148.502724] warn_slowpath_null+0x1d/0x20
[ 148.502733] net_rx_action+0x274/0x380
[ 148.502741] __do_softirq+0x104/0x2af
[ 148.502751] irq_exit+0xb6/0xc0
[ 148.502756] do_IRQ+0x4f/0xd0
[ 148.502767] common_interrupt+0x89/0x89
[ 148.502774] RIP: 0033:0x7f5378f2ba55
[ 148.502779] RSP: 002b:00007f533ebf96e8 EFLAGS: 00000203 ORIG_RAX: ffffffffffffff6a
[ 148.502787] RAX: 0000000000000000 RBX: 00007f534044d1a0 RCX: 0000000000000002
[ 148.502791] RDX: 0000000000000006 RSI: 0000000000000500 RDI: 00007f5340aec420
[ 148.502795] RBP: 00007f5378f80ef0 R08: 00007f5340aeb520 R09: 0000000000000034
[ 148.502799] R10: 00007f533ebf9770 R11: 0000000000000f00 R12: 00007f5378f80db0
[ 148.502802] R13: 0000000000000005 R14: 00007f5378f80e50 R15: 0000000000000500
[ 148.502806] </IRQ>
[ 148.502813] ---[ end trace f0b4711b0d5b623c ]---
[ 935.814606] pcieport 0000:00:1d.0: AER: Corrected error received: id=00e8
[ 935.814617] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e8(Transmitter ID)
[ 935.814626] pcieport 0000:00:1d.0: device [8086:9d18] error status/mask=00001000/00002000
[ 935.814631] pcieport 0000:00:1d.0: [12] Replay Timer Timeout
[ 1692.795988] pcieport 0000:00:1d.0: AER: Corrected error received: id=00e8
[ 1692.796000] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e8(Transmitter ID)
[ 1692.796009] pcieport 0000:00:1d.0: device [8086:9d18] error status/mask=00001000/00002000
[ 1692.796015] pcieport 0000:00:1d.0: [12] Replay Timer Timeout
***[ 1953.935951] TCP: wlp58s0: Driver has suspect GRO implementation, TCP performance may be compromised.
[ 2426.728768] wlp58s0: deauthenticating from f4:f2:6d:d8:fe:a7 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2426.744932] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 2427.251818] PM: Syncing filesystems ... done.
[ 2427.255761] PM: Preparing system for sleep (mem)
[ 2427.256421] Freezing user space processes ... (elapsed 0.003 seconds) done.
[ 2427.259690] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2427.261315] PM: Suspending system (mem)
***[ 2427.261406] Suspending console(s) (use no_console_suspend to debug)
***[ 2427.467052] psmouse serio1: Failed to disable mouse on isa0060/serio1
[ 2428.394605] ACPI : EC: event blocked
[ 2428.706725] PM: suspend of devices complete after 1444.930 msecs
[ 2428.734493] PM: late suspend of devices complete after 27.759 msecs
[ 2428.735572] ACPI : EC: interrupt blocked
[ 2428.738155] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 2428.778282] PM: noirq suspend of devices complete after 43.782 msecs
[ 2428.778980] ACPI: Preparing to enter system sleep state S3
[ 2428.785017] ACPI : EC: EC stopped
[ 2428.785018] PM: Saving platform NVS memory
[ 2428.785083] Disabling non-boot CPUs ...
[ 2428.785434] Broke affinity for irq 286
[ 2428.786651] smpboot: CPU 1 is now offline
[ 2428.806973] Broke affinity for irq 122
[ 2428.806976] Broke affinity for irq 123
[ 2428.806979] Broke affinity for irq 124
[ 2428.806981] Broke affinity for irq 125
[ 2428.806985] Broke affinity for irq 126
[ 2428.807014] Broke affinity for irq 286
[ 2428.808376] smpboot: CPU 2 is now offline
[ 2428.831437] Broke affinity for irq 1
[ 2428.831443] Broke affinity for irq 8
[ 2428.831447] Broke affinity for irq 9
[ 2428.831452] Broke affinity for irq 12
[ 2428.831456] Broke affinity for irq 14
[ 2428.831461] Broke affinity for irq 16
[ 2428.831466] Broke affinity for irq 17
[ 2428.831488] Broke affinity for irq 51
[ 2428.831497] Broke affinity for irq 122
[ 2428.831502] Broke affinity for irq 123
[ 2428.831507] Broke affinity for irq 124
[ 2428.831511] Broke affinity for irq 125
[ 2428.831516] Broke affinity for irq 126
[ 2428.831560] Broke affinity for irq 281
[ 2428.831565] Broke affinity for irq 286
[ 2428.832625] smpboot: CPU 3 is now offline
[ 2428.845914] ACPI: Low-level resume complete
[ 2428.846028] ACPI : EC: EC started
[ 2428.846028] PM: Restoring platform NVS memory
[ 2428.846831] Suspended for 30400.940 seconds
[ 2428.846906] Enabling non-boot CPUs ...
[ 2428.858193] x86: Booting SMP configuration:
[ 2428.858194] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 2428.858703] cache: parent cpu1 should not be sleeping
[ 2428.858949] CPU1 is up
[ 2428.874415] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 2428.875365] cache: parent cpu2 should not be sleeping
[ 2428.875847] CPU2 is up
[ 2428.890504] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 2428.891408] cache: parent cpu3 should not be sleeping
[ 2428.891885] CPU3 is up
[ 2428.898802] ACPI: Waking up from system sleep state S3
[ 2428.940017] acpi LNXPOWER:13: Turning OFF
[ 2428.940131] acpi LNXPOWER:12: Turning OFF
[ 2428.940531] acpi LNXPOWER:11: Turning OFF
[ 2428.940637] acpi LNXPOWER:10: Turning OFF
[ 2428.940936] acpi LNXPOWER:0f: Turning OFF
[ 2428.941187] acpi LNXPOWER:0e: Turning OFF
[ 2428.941295] acpi LNXPOWER:0d: Turning OFF
[ 2428.941757] acpi LNXPOWER:0c: Turning OFF
[ 2428.941866] acpi LNXPOWER:0b: Turning OFF
[ 2428.942303] acpi LNXPOWER:0a: Turning OFF
[ 2428.942412] acpi LNXPOWER:09: Turning OFF
[ 2428.942745] acpi LNXPOWER:08: Turning OFF
[ 2428.942857] acpi LNXPOWER:07: Turning OFF
[ 2428.943254] acpi LNXPOWER:06: Turning OFF
[ 2428.943359] acpi LNXPOWER:05: Turning OFF
[ 2428.943726] acpi LNXPOWER:04: Turning OFF
[ 2428.943833] acpi LNXPOWER:03: Turning OFF
[ 2428.944256] acpi LNXPOWER:02: Turning OFF
[ 2428.944363] acpi LNXPOWER:01: Turning OFF
[ 2428.944699] acpi LNXPOWER:00: Turning OFF
[ 2428.944900] ACPI : EC: interrupt unblocked
[ 2429.014039] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 2429.014137] PM: noirq resume of devices complete after 69.392 msecs
[ 2429.023420] PM: early resume of devices complete after 9.064 msecs
[ 2429.023540] ACPI : EC: event unblocked
[ 2429.031385] [drm] GuC firmware load skipped
[ 2429.035012] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 2429.090398] xhci_hcd 0000:00:14.0: port 2 resume PLC timeout
[ 2429.326559] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[ 2429.403425] atkbd_interrupt: 33 callbacks suppressed
***[ 2429.403432] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 2429.646601] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[ 2429.789014] PM: resume of devices complete after 765.575 msecs
[ 2429.789261] usb 1-3:1.0: rebind failed: -517
[ 2429.789271] usb 1-3:1.1: rebind failed: -517
[ 2429.789732] PM: Finishing wakeup.
[ 2429.789734] Restarting tasks ...
[ 2429.796595] [drm] RC6 on
[ 2429.805604] done.
[ 2429.879595] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 2432.168388] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 2434.539923] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 2434.600525] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 2439.075482] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 2439.139181] wlp58s0: authenticate with f4:f2:6d:d8:fe:a7
[ 2439.186695] wlp58s0: send auth to f4:f2:6d:d8:fe:a7 (try 1/3)
[ 2439.191192] wlp58s0: authenticated
[ 2439.194155] wlp58s0: associate with f4:f2:6d:d8:fe:a7 (try 1/3)
[ 2439.203598] wlp58s0: RX AssocResp from f4:f2:6d:d8:fe:a7 (capab=0x11 status=0 aid=2)
[ 2439.206983] wlp58s0: associated
[ 2439.207436] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready
[ 2439.215766] ath: EEPROM regdomain: 0x8348
[ 2439.215769] ath: EEPROM indicates we should expect a country code
[ 2439.215772] ath: doing EEPROM country->regdmn map search
[ 2439.215774] ath: country maps to regdmn code: 0x3a
[ 2439.215776] ath: Country alpha2 being used: US
[ 2439.215777] ath: Regpair used: 0x3a
[ 2439.215780] ath: regdomain 0x8348 dynamically updated by country IE
[ 2449.467078] systemd[1]: snapd.refresh.timer: Adding 24min 44.915591s random time.
[ 2459.634239] systemd[1]: snapd.refresh.timer: Adding 4h 28min 2.819910s random time.